Package capnp is a Cap'n Proto library for Go. https://capnproto.org/ Read the Getting Started guide for a tutorial on how to use this package. https://github.com/capnproto/go-capnproto2/wiki/Getting-Started capnpc-go provides the compiler backend for capnp. capnpc-go requires two annotations for all files: package and import. package is needed to know what package to place at the head of the generated file and what identifier to use when referring to the type from another package. import should be the fully qualified import path and is used to generate import statement from other packages and to detect when two types are in the same package. For example: For adding documentation comments to the generated code, there's the doc annotation. This annotation adds the comment to a struct, enum or field so that godoc will pick it up. For example: In Cap'n Proto, the unit of communication is a message. A message consists of one or more segments -- contiguous blocks of memory. This allows large messages to be split up and loaded independently or lazily. Typically you will use one segment per message. Logically, a message is organized in a tree of objects, with the root always being a struct (as opposed to a list or primitive). Messages can be read from and written to a stream. The Message and Segment types are the main types that application code will use from this package. The Message type has methods for marshaling and unmarshaling its segments to the wire format. If the application needs to read or write from a stream, it should use the Encoder and Decoder types. The type for a generic reference to a Cap'n Proto object is Ptr. A Ptr can refer to a struct, a list, or an interface. Ptr, Struct, List, and Interface (the pointer types) have value semantics and refer to data in a single segment. All of the pointer types have a notion of "valid". An invalid pointer will return the default value from any accessor and panic when any setter is called. In previous versions of this package, the Pointer interface was used instead of the Ptr struct. This interface and functions that use it are now deprecated. See https://github.com/capnproto/go-capnproto2/wiki/New-Ptr-Type for details about this API change. Data accessors and setters (i.e. struct primitive fields and list elements) do not return errors, but pointer accessors and setters do. There are a few reasons that a read or write of a pointer can fail, but the most common are bad pointers or allocation failures. For accessors, an invalid object will be returned in case of an error. Since Go doesn't have generics, wrapper types provide type safety on lists. This package provides lists of basic types, and capnpc-go generates list wrappers for named types. However, if you need to use deeper nesting of lists (e.g. List(List(UInt8))), you will need to use a PointerList and wrap the elements. For the following schema: capnpc-go will generate: For each group a typedef is created with a different method set for just the groups fields: generates the following: That way the following may be used to access a field in a group: Note that group accessors just convert the type and so have no overhead. Named unions are treated as a group with an inner unnamed union. Unnamed unions generate an enum Type_Which and a corresponding Which() function: generates the following: Which() should be checked before using the getters, and the default case must always be handled. Setters for single values will set the union discriminator as well as set the value. For voids in unions, there is a void setter that just sets the discriminator. For example: generates the following: Similarly, for groups in unions, there is a group setter that just sets the discriminator. This must be called before the group getter can be used to set values. For example: and in usage: capnpc-go generates enum values as constants. For example in the capnp file: In the generated capnp.go file: In addition an enum.String() function is generated that will convert the constants to a string for debugging or logging purposes. By default, the enum name is used as the tag value, but the tags can be customized with a $Go.tag or $Go.notag annotation. For example: In the generated go file: capnpc-go generates type-safe Client wrappers for interfaces. For parameter lists and result lists, structs are generated as described above with the names Interface_method_Params and Interface_method_Results, unless a single struct type is used. For example, for this interface: capnpc-go generates the following Go code (along with the structs Calculator_evaluate_Params and Calculator_evaluate_Results): capnpc-go also generates code to implement the interface: Since a single capability may want to implement many interfaces, you can use multiple *_Methods functions to build a single slice to send to NewServer. An example of combining the client/server code to communicate with a locally implemented Calculator: A note about message ordering: by default, only one method per server will be invoked at a time; when implementing a server method which blocks or takes a long time, you calling the server.Go function to unblock future calls.
Package jsonschema uses reflection to generate JSON Schemas from Go types [1]. If json tags are present on struct fields, they will be used to infer property names and if a property is required (omitempty is present). [1] http://json-schema.org/latest/json-schema-validation.html
Package form Decodes url.Values into Go value(s) and Encodes Go value(s) into url.Values. It has the following features: Questions out of the box supported types string bool int, int8, int16, int32, int64 uint, uint8, uint16, uint32, uint64 float32, float64 struct and anonymous struct interface{} time.Time` - by default using RFC3339 a `pointer` to one of the above types slice, array map `custom types` can override any of the above types many other types may be supported inherently (eg. bson.ObjectId is type ObjectId string, which will get populated by the string type **NOTE**: map, struct and slice nesting are ad infinitum. symbols html example decoding the above HTML example encoding Decoder Encoder you can tell form to ignore fields using `-` in the tag you can tell form to omit empty fields using `,omitempty` or `FieldName,omitempty` in the tag To maximize compatibility with other systems the Encoder attempts to avoid using array indexes in url.Values if at all possible.
Package globalaccelerator provides the API client, operations, and parameter types for AWS Global Accelerator. This is the Global Accelerator API Reference. This guide is for developers who need detailed information about Global Accelerator API actions, data types, and errors. For more information about Global Accelerator features, see the Global Accelerator Developer Guide. Global Accelerator is a service in which you create accelerators to improve the performance of your applications for local and global users. Depending on the type of accelerator you choose, you can gain additional benefits. By using a standard accelerator, you can improve availability of your internet applications that are used by a global audience. With a standard accelerator, Global Accelerator directs traffic to optimal endpoints over the Amazon Web Services global network. For other scenarios, you might choose a custom routing accelerator. With a custom routing accelerator, you can use application logic to directly map one or more users to a specific endpoint among many endpoints. Global Accelerator is a global service that supports endpoints in multiple Amazon Web Services Regions but you must specify the US West (Oregon) Region to create, update, or otherwise work with accelerators. That is, for example, specify --region us-west-2 on Amazon Web Services CLI commands. By default, Global Accelerator provides you with static IP addresses that you associate with your accelerator. The static IP addresses are anycast from the Amazon Web Services edge network. For IPv4, Global Accelerator provides two static IPv4 addresses. For dual-stack, Global Accelerator provides a total of four addresses: two static IPv4 addresses and two static IPv6 addresses. With a standard accelerator for IPv4, instead of using the addresses that Global Accelerator provides, you can configure these entry points to be IPv4 addresses from your own IP address ranges that you bring to Global Accelerator (BYOIP). For a standard accelerator, they distribute incoming application traffic across multiple endpoint resources in multiple Amazon Web Services Regions , which increases the availability of your applications. Endpoints for standard accelerators can be Network Load Balancers, Application Load Balancers, Amazon EC2 instances, or Elastic IP addresses that are located in one Amazon Web Services Region or multiple Amazon Web Services Regions. For custom routing accelerators, you map traffic that arrives to the static IP addresses to specific Amazon EC2 servers in endpoints that are virtual private cloud (VPC) subnets. The static IP addresses remain assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to it, so you can no longer route traffic by using them. You can use IAM policies like tag-based permissions with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Tag-based policies. For standard accelerators, Global Accelerator uses the Amazon Web Services global network to route traffic to the optimal regional endpoint based on health, client location, and policies that you configure. The service reacts instantly to changes in health or configuration to ensure that internet traffic from clients is always directed to healthy endpoints. For more information about understanding and using Global Accelerator, see the Global Accelerator Developer Guide.
Package ethernet implements marshaling and unmarshaling of IEEE 802.3 Ethernet II frames and IEEE 802.1Q VLAN tags.
Package libvirt provides a Go binding to the libvirt C library Through conditional compilation it supports libvirt versions 1.2.0 onwards. This is done automatically, with no requirement to use magic Go build tags. If an API was not available in the particular version of libvirt this package was built against, an error will be returned with a code of ERR_NO_SUPPORT. This is the same code seen if using a new libvirt library to talk to an old libvirtd lacking the API, or if a hypervisor does not support a given feature, so an application can easily handle all scenarios together. The Go binding is a fairly direct mapping of the underling C API which seeks to maximise the use of the Go type system to allow strong compiler type checking. The following rules describe how APIs/constants are mapped from C to Go For structs, the 'vir' prefix and 'Ptr' suffix are removed from the name. e.g. virConnectPtr in C becomes 'Connect' in Go. For structs which are reference counted at the C level, it is neccessary to explicitly release the reference at the Go level. e.g. if a Go method returns a '* Domain' struct, it is neccessary to call 'Free' on this when no longer required. The use of 'defer' is recommended for this purpose If multiple goroutines are using the same libvirt object struct, it may not be possible to determine which goroutine should call 'Free'. In such scenarios each new goroutine should call 'Ref' to obtain a private reference on the underlying C struct. All goroutines can call 'Free' unconditionally with the final one causing the release of the C object. For methods, the 'vir' prefix and object name prefix are remove from the name. The C functions become methods with an object receiver. e.g. 'virDomainScreenshot' in C becomes 'Screenshot' with a 'Domain *' receiver. For methods which accept a 'unsigned int flags' parameter in the C level, the corresponding Go parameter will be a named type corresponding to the C enum that defines the valid flags. For example, the ListAllDomains method takes a 'flags ConnectListAllDomainsFlags' parameter. If there are not currently any flags defined for a method in the C API, then the Go method parameter will be declared as a "flags uint32". Callers should always pass the literal integer value 0 for such parameters, without forcing any specific type. This will allow compatibility with future updates to the libvirt-go binding which may replace the 'uint32' type with a enum type at a later date. For enums, the VIR_ prefix is removed from the name. The enums get a dedicated type defined in Go. e.g. the VIR_NODE_SUSPEND_TARGET_MEM enum constant in C, becomes NODE_SUSPEND_TARGET_MEM with a type of NodeSuspendTarget. Methods accepting or returning virTypedParameter arrays in C will map the parameters into a Go struct. The struct will contain two fields for each possible parameter. One boolean field with a suffix of 'Set' indicates whether the parameter has a value set, and the other custom typed field provides the parameter value. This makes it possible to distinguish a parameter with a default value of '0' from a parameter which is 0 because it isn't supported by the hypervisor. If the C API defines additional typed parameters, then the corresponding Go struct will be extended to have further fields. e.g. the GetMemoryStats method in Go (which is backed by virNodeGetMemoryStats in C) will return a NodeMemoryStats struct containing the typed parameter values. Every method that can fail will include an 'error' object as the last return value. This will be an instance of the Error struct if an error occurred. To check for specific libvirt error codes, it is neccessary to cast the error. To connect to libvirt
Package form Decodes url.Values into Go value(s) and Encodes Go value(s) into url.Values. It has the following features: Questions out of the box supported types string bool int, int8, int16, int32, int64 uint, uint8, uint16, uint32, uint64 float32, float64 struct and anonymous struct interface{} time.Time` - by default using RFC3339 a `pointer` to one of the above types slice, array map `custom types` can override any of the above types many other types may be supported inherently (eg. bson.ObjectId is type ObjectId string, which will get populated by the string type **NOTE**: map, struct and slice nesting are ad infinitum. symbols html example decoding the above HTML example encoding Decoder Encoder you can tell form to ignore fields using `-` in the tag you can tell form to omit empty fields using `,omitempty` or `FieldName,omitempty` in the tag To maximize compatibility with other systems the Encoder attempts to avoid using array indexes in url.Values if at all possible.
Package sqlstruct provides some convenience functions for using structs with the Go standard library's database/sql package. The package matches struct field names to SQL query column names. A field can also specify a matching column with "sql" tag, if it's different from field name. Unexported fields or fields marked with `sql:"-"` are ignored, just like with "encoding/json" package. For example: Aliased tables in a SQL statement may be scanned into a specific structure identified by the same alias, using the ColumnsAliased and ScanAliased functions:
This is the official Go SDK for Oracle Cloud Infrastructure Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#installing for installation instructions. Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring for configuration instructions. The following example shows how to get started with the SDK. The example belows creates an identityClient struct with the default configuration. It then utilizes the identityClient to list availability domains and prints them out to stdout More examples can be found in the SDK Github repo: https://github.com/oracle/oci-go-sdk/tree/master/example Optional fields are represented with the `mandatory:"false"` tag on input structs. The SDK will omit all optional fields that are nil when making requests. In the case of enum-type fields, the SDK will omit fields whose value is an empty string. The SDK uses pointers for primitive types in many input structs. To aid in the construction of such structs, the SDK provides functions that return a pointer for a given value. For example: The SDK exposes functionality that allows the user to customize any http request before is sent to the service. You can do so by setting the `Interceptor` field in any of the `Client` structs. For example: The Interceptor closure gets called before the signing process, thus any changes done to the request will be properly signed and submitted to the service. The SDK exposes a stand-alone signer that can be used to signing custom requests. Related code can be found here: https://github.com/oracle/oci-go-sdk/blob/master/common/http_signer.go. The example below shows how to create a default signer. The signer also allows more granular control on the headers used for signing. For example: You can combine a custom signer with the exposed clients in the SDK. This allows you to add custom signed headers to the request. Following is an example: Bear in mind that some services have a white list of headers that it expects to be signed. Therefore, adding an arbitrary header can result in authentications errors. To see a runnable example, see https://github.com/oracle/oci-go-sdk/blob/master/example/example_identity_test.go For more information on the signing algorithm refer to: https://docs.cloud.oracle.com/Content/API/Concepts/signingrequests.htm Some operations accept or return polymorphic JSON objects. The SDK models such objects as interfaces. Further the SDK provides structs that implement such interfaces. Thus, for all operations that expect interfaces as input, pass the struct in the SDK that satisfies such interface. For example: In the case of a polymorphic response you can type assert the interface to the expected type. For example: An example of polymorphic JSON request handling can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_test.go#L63 When calling a list operation, the operation will retrieve a page of results. To retrieve more data, call the list operation again, passing in the value of the most recent response's OpcNextPage as the value of Page in the next list operation call. When there is no more data the OpcNextPage field will be nil. An example of pagination using this logic can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_pagination_test.go The SDK has a built-in logging mechanism used internally. The internal logging logic is used to record the raw http requests, responses and potential errors when (un)marshalling request and responses. Built-in logging in the SDK is controlled via the environment variable "OCI_GO_SDK_DEBUG" and its contents. The below are possible values for the "OCI_GO_SDK_DEBUG" variable 1. "info" or "i" enables all info logging messages 2. "debug" or "d" enables all debug and info logging messages 3. "verbose" or "v" or "1" enables all verbose, debug and info logging messages 4. "null" turns all logging messages off. If the value of the environment variable does not match any of the above then default logging level is "info". If the environment variable is not present then no logging messages are emitted. The default destination for logging is Stderr and if you want to output log to a file you can set via environment variable "OCI_GO_SDK_LOG_OUTPUT_MODE". The below are possible values 1. "file" or "f" enables all logging output saved to file 2. "combine" or "c" enables all logging output to both stderr and file You can also customize the log file location and name via "OCI_GO_SDK_LOG_FILE" environment variable, the value should be the path to a specific file If this environment variable is not present, the default location will be the project root path Sometimes you may need to wait until an attribute of a resource, such as an instance or a VCN, reaches a certain state. An example of this would be launching an instance and then waiting for the instance to become available, or waiting until a subnet in a VCN has been terminated. You might also want to retry the same operation again if there's network issue etc... This can be accomplished by using the RequestMetadata.RetryPolicy(request level configuration), alternatively, global(all services) or client level RetryPolicy configration is also possible. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_retry_test.go If you are trying to make a PUT/POST API call with binary request body, please make sure the binary request body is resettable, which means the request body should inherit Seeker interface. The Retry behavior Precedence (Highest to lowest) is defined as below:- The OCI Go SDK defines a default retry policy that retries on the errors suitable for retries (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm), for a recommended period of time (up to 7 attempts spread out over at most approximately 1.5 minutes). The default retry policy is defined by : Default Retry-able Errors Below is the list of default retry-able errors for which retry attempts should be made. The following errors should be retried (with backoff). HTTP Code Customer-facing Error Code Apart from the above errors, retries should also be attempted in the following Client Side errors : 1. HTTP Connection timeout 2. Request Connection Errors 3. Request Exceptions 4. Other timeouts (like Read Timeout) The above errors can be avoided through retrying and hence, are classified as the default retry-able errors. Additionally, retries should also be made for Circuit Breaker exceptions (Exceptions raised by Circuit Breaker in an open state) Default Termination Strategy The termination strategy defines when SDKs should stop attempting to retry. In other words, it's the deadline for retries. The OCI SDKs should stop retrying the operation after 7 retry attempts. This means the SDKs will have retried for ~98 seconds or ~1.5 minutes have elapsed due to total delays. SDKs will make a total of 8 attempts. (1 initial request + 7 retries) Default Delay Strategy Default Delay Strategy - The delay strategy defines the amount of time to wait between each of the retry attempts. The default delay strategy chosen for the SDK – Exponential backoff with jitter, using: 1. The base time to use in retry calculations will be 1 second 2. An exponent of 2. When calculating the next retry time, the SDK will raise this to the power of the number of attempts 3. A maximum wait time between calls of 30 seconds (Capped) 4. Added jitter value between 0-1000 milliseconds to spread out the requests Configure and use default retry policy You can set this retry policy for a single request: or for all requests made by a client: or for all requests made by all clients: or setting default retry via environment varaible, which is a global switch for all services: Some services enable retry for operations by default, this can be overridden using any alternatives mentioned above. To know which service operations have retries enabled by default, look at the operation's description in the SDK - it will say whether that it has retries enabled by default Some resources may have to be replicated across regions and are only eventually consistent. That means the request to create, update, or delete the resource succeeded, but the resource is not available everywhere immediately. Creating, updating, or deleting any resource in the Identity service is affected by eventual consistency, and doing so may cause other operations in other services to fail until the Identity resource has been replicated. For example, the request to CreateTag in the Identity service in the home region succeeds, but immediately using that created tag in another region in a request to LaunchInstance in the Compute service may fail. If you are creating, updating, or deleting resources in the Identity service, we recommend using an eventually consistent retry policy for any service you access. The default retry policy already deals with eventual consistency. Example: This retry policy will use a different strategy if an eventually consistent change was made in the recent past (called the "eventually consistent window", currently defined to be 4 minutes after the eventually consistent change). This special retry policy for eventual consistency will: 1. make up to 9 attempts (including the initial attempt); if an attempt is successful, no more attempts will be made 2. retry at most until (a) approximately the end of the eventually consistent window or (b) the end of the default retry period of about 1.5 minutes, whichever is farther in the future; if an attempt is successful, no more attempts will be made, and the OCI Go SDK will not wait any longer 3. retry on the error codes 400-RelatedResourceNotAuthorizedOrNotFound, 404-NotAuthorizedOrNotFound, and 409-NotAuthorizedOrResourceAlreadyExists, for which the default retry policy does not retry, in addition to the errors the default retry policy retries on (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm) If there were no eventually consistent actions within the recent past, then this special retry strategy is not used. If you want a retry policy that does not handle eventual consistency in a special way, for example because you retry on all error responses, you can use DefaultRetryPolicyWithoutEventualConsistency or NewRetryPolicyWithOptions with the common.ReplaceWithValuesFromRetryPolicy(common.DefaultRetryPolicyWithoutEventualConsistency()) option: The NewRetryPolicy function also creates a retry policy without eventual consistency. Circuit Breaker can prevent an application repeatedly trying to execute an operation that is likely to fail, allowing it to continue without waiting for the fault to be rectified or wasting CPU cycles, of course, it also enables an application to detect whether the fault has been resolved. If the problem appears to have been rectified, the application can attempt to invoke the operation. Go SDK intergrates sony/gobreaker solution, wraps in a circuit breaker object, which monitors for failures. Once the failures reach a certain threshold, the circuit breaker trips, and all further calls to the circuit breaker return with an error, this also saves the service from being overwhelmed with network calls in case of an outage. Circuit Breaker Configuration Definitions 1. Failure Rate Threshold - The state of the CircuitBreaker changes from CLOSED to OPEN when the failure rate is equal or greater than a configurable threshold. For example when more than 50% of the recorded calls have failed. 2. Reset Timeout - The timeout after which an open circuit breaker will attempt a request if a request is made 3. Failure Exceptions - The list of Exceptions that will be regarded as failures for the circuit. 4. Minimum number of calls/ Volume threshold - Configures the minimum number of calls which are required (per sliding window period) before the CircuitBreaker can calculate the error rate. 1. Failure Rate Threshold - 80% - This means when 80% of the requests calculated for a time window of 120 seconds have failed then the circuit will transition from closed to open. 2. Minimum number of calls/ Volume threshold - A value of 10, for the above defined time window of 120 seconds. 3. Reset Timeout - 30 seconds to wait before setting the breaker to halfOpen state, and trying the action again. 4. Failure Exceptions - The failures for the circuit will only be recorded for the retryable/transient exceptions. This means only the following exceptions will be regarded as failure for the circuit. HTTP Code Customer-facing Error Code Apart from the above, the following client side exceptions will also be treated as a failure for the circuit : 1. HTTP Connection timeout 2. Request Connection Errors 3. Request Exceptions 4. Other timeouts (like Read Timeout) Go SDK enable circuit breaker with default configuration for most of the service clients, if you don't want to enable the solution, can disable the functionality before your application running Go SDK also supports customize Circuit Breaker with specified configurations. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_circuitbreaker_test.go To know which service clients have circuit breakers enabled, look at the service client's description in the SDK - it will say whether that it has circuit breakers enabled by default The GO SDK uses the net/http package to make calls to OCI services. If your environment requires you to use a proxy server for outgoing HTTP requests then you can set this up in the following ways: 1. Configuring environment variable as described here https://golang.org/pkg/net/http/#ProxyFromEnvironment 2. Modifying the underlying Transport struct for a service client In order to modify the underlying Transport struct in HttpClient, you can do something similar to (sample code for audit service client): The Object Storage service supports multipart uploads to make large object uploads easier by splitting the large object into parts. The Go SDK supports raw multipart upload operations for advanced use cases, as well as a higher level upload class that uses the multipart upload APIs. For links to the APIs used for multipart upload operations, see Managing Multipart Uploads (https://docs.cloud.oracle.com/iaas/Content/Object/Tasks/usingmultipartuploads.htm). Higher level multipart uploads are implemented using the UploadManager, which will: split a large object into parts for you, upload the parts in parallel, and then recombine and commit the parts as a single object in storage. This code sample shows how to use the UploadManager to automatically split an object into parts for upload to simplify interaction with the Object Storage service: https://github.com/oracle/oci-go-sdk/blob/master/example/example_objectstorage_test.go Some response fields are enum-typed. In the future, individual services may return values not covered by existing enums for that field. To address this possibility, every enum-type response field is a modeled as a type that supports any string. Thus if a service returns a value that is not recognized by your version of the SDK, then the response field will be set to this value. When individual services return a polymorphic JSON response not available as a concrete struct, the SDK will return an implementation that only satisfies the interface modeling the polymorphic JSON response. If you are using a version of the SDK released prior to the announcement of a new region, you may need to use a workaround to reach it, depending on whether the region is in the oraclecloud.com realm. A region is a localized geographic area. For more information on regions and how to identify them, see Regions and Availability Domains(https://docs.cloud.oracle.com/iaas/Content/General/Concepts/regions.htm). A realm is a set of regions that share entities. You can identify your realm by looking at the domain name at the end of the network address. For example, the realm for xyz.abc.123.oraclecloud.com is oraclecloud.com. oraclecloud.com Realm: For regions in the oraclecloud.com realm, even if common.Region does not contain the new region, the forward compatibility of the SDK can automatically handle it. You can pass new region names just as you would pass ones that are already defined. For more information on passing region names in the configuration, see Configuring (https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring). For details on common.Region, see (https://github.com/oracle/oci-go-sdk/blob/master/common/common.go). Other Realms: For regions in realms other than oraclecloud.com, you can use the following workarounds to reach new regions with earlier versions of the SDK. NOTE: Be sure to supply the appropriate endpoints for your region. You can overwrite the target host with client.Host: If you are authenticating via instance principals, you can set the authentication endpoint in an environment variable: Got a fix for a bug, or a new feature you'd like to contribute? The SDK is open source and accepting pull requests on GitHub https://github.com/oracle/oci-go-sdk Licensing information available at: https://github.com/oracle/oci-go-sdk/blob/master/LICENSE.txt To be notified when a new version of the Go SDK is released, subscribe to the following feed: https://github.com/oracle/oci-go-sdk/releases.atom Please refer to this link: https://github.com/oracle/oci-go-sdk#help
This is the official Go SDK for Oracle Cloud Infrastructure Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#installing for installation instructions. Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring for configuration instructions. The following example shows how to get started with the SDK. The example belows creates an identityClient struct with the default configuration. It then utilizes the identityClient to list availability domains and prints them out to stdout More examples can be found in the SDK Github repo: https://github.com/oracle/oci-go-sdk/tree/master/example Optional fields are represented with the `mandatory:"false"` tag on input structs. The SDK will omit all optional fields that are nil when making requests. In the case of enum-type fields, the SDK will omit fields whose value is an empty string. The SDK uses pointers for primitive types in many input structs. To aid in the construction of such structs, the SDK provides functions that return a pointer for a given value. For example: Dedicated endpoints are the endpoint templates defined by the service for a specific realm at client level. OCI Go SDK allows you to enable the use of these realm-specific endpoint templates feature at application level and at client level. The value set at client level takes precedence over the value set at the application level. This feature is disabled by default. For reference, please refer https://github.com/oracle/oci-go-sdk/blob/master/example/example_objectstorage_test.go#L222-L251 The SDK exposes functionality that allows the user to customize any http request before is sent to the service. You can do so by setting the `Interceptor` field in any of the `Client` structs. For example: The Interceptor closure gets called before the signing process, thus any changes done to the request will be properly signed and submitted to the service. The SDK exposes a stand-alone signer that can be used to signing custom requests. Related code can be found here: https://github.com/oracle/oci-go-sdk/blob/master/common/http_signer.go. The example below shows how to create a default signer. The signer also allows more granular control on the headers used for signing. For example: You can combine a custom signer with the exposed clients in the SDK. This allows you to add custom signed headers to the request. Following is an example: Bear in mind that some services have a white list of headers that it expects to be signed. Therefore, adding an arbitrary header can result in authentications errors. To see a runnable example, see https://github.com/oracle/oci-go-sdk/blob/master/example/example_identity_test.go For more information on the signing algorithm refer to: https://docs.cloud.oracle.com/Content/API/Concepts/signingrequests.htm Some operations accept or return polymorphic JSON objects. The SDK models such objects as interfaces. Further the SDK provides structs that implement such interfaces. Thus, for all operations that expect interfaces as input, pass the struct in the SDK that satisfies such interface. For example: In the case of a polymorphic response you can type assert the interface to the expected type. For example: An example of polymorphic JSON request handling can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_test.go#L63 When calling a list operation, the operation will retrieve a page of results. To retrieve more data, call the list operation again, passing in the value of the most recent response's OpcNextPage as the value of Page in the next list operation call. When there is no more data the OpcNextPage field will be nil. An example of pagination using this logic can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_pagination_test.go The SDK has a built-in logging mechanism used internally. The internal logging logic is used to record the raw http requests, responses and potential errors when (un)marshalling request and responses. Built-in logging in the SDK is controlled via the environment variable "OCI_GO_SDK_DEBUG" and its contents. The below are possible values for the "OCI_GO_SDK_DEBUG" variable 1. "info" or "i" enables all info logging messages 2. "debug" or "d" enables all debug and info logging messages 3. "verbose" or "v" or "1" enables all verbose, debug and info logging messages 4. "null" turns all logging messages off. If the value of the environment variable does not match any of the above then default logging level is "info". If the environment variable is not present then no logging messages are emitted. You can also enable logs by code. For example This way you enable debug logs by code. The default destination for logging is Stderr and if you want to output log to a file you can set via environment variable "OCI_GO_SDK_LOG_OUTPUT_MODE". The below are possible values 1. "file" or "f" enables all logging output saved to file 2. "combine" or "c" enables all logging output to both stderr and file You can also customize the log file location and name via "OCI_GO_SDK_LOG_FILE" environment variable, the value should be the path to a specific file If this environment variable is not present, the default location will be the project root path Sometimes you may need to wait until an attribute of a resource, such as an instance or a VCN, reaches a certain state. An example of this would be launching an instance and then waiting for the instance to become available, or waiting until a subnet in a VCN has been terminated. You might also want to retry the same operation again if there's network issue etc... This can be accomplished by using the RequestMetadata.RetryPolicy(request level configuration), alternatively, global(all services) or client level RetryPolicy configration is also possible. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_retry_test.go If you are trying to make a PUT/POST API call with binary request body, please make sure the binary request body is resettable, which means the request body should inherit Seeker interface. The Retry behavior Precedence (Highest to lowest) is defined as below:- The OCI Go SDK defines a default retry policy that retries on the errors suitable for retries (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm), for a recommended period of time (up to 7 attempts spread out over at most approximately 1.5 minutes). The default retry policy is defined by : Default Retry-able Errors Below is the list of default retry-able errors for which retry attempts should be made. The following errors should be retried (with backoff). HTTP Code Customer-facing Error Code Apart from the above errors, retries should also be attempted in the following Client Side errors : 1. HTTP Connection timeout 2. Request Connection Errors 3. Request Exceptions 4. Other timeouts (like Read Timeout) The above errors can be avoided through retrying and hence, are classified as the default retry-able errors. Additionally, retries should also be made for Circuit Breaker exceptions (Exceptions raised by Circuit Breaker in an open state) Default Termination Strategy The termination strategy defines when SDKs should stop attempting to retry. In other words, it's the deadline for retries. The OCI SDKs should stop retrying the operation after 7 retry attempts. This means the SDKs will have retried for ~98 seconds or ~1.5 minutes have elapsed due to total delays. SDKs will make a total of 8 attempts. (1 initial request + 7 retries) Default Delay Strategy Default Delay Strategy - The delay strategy defines the amount of time to wait between each of the retry attempts. The default delay strategy chosen for the SDK – Exponential backoff with jitter, using: 1. The base time to use in retry calculations will be 1 second 2. An exponent of 2. When calculating the next retry time, the SDK will raise this to the power of the number of attempts 3. A maximum wait time between calls of 30 seconds (Capped) 4. Added jitter value between 0-1000 milliseconds to spread out the requests Configure and use default retry policy You can set this retry policy for a single request: or for all requests made by a client: or for all requests made by all clients: or setting default retry via environment variable, which is a global switch for all services: Some services enable retry for operations by default, this can be overridden using any alternatives mentioned above. To know which service operations have retries enabled by default, look at the operation's description in the SDK - it will say whether that it has retries enabled by default Some resources may have to be replicated across regions and are only eventually consistent. That means the request to create, update, or delete the resource succeeded, but the resource is not available everywhere immediately. Creating, updating, or deleting any resource in the Identity service is affected by eventual consistency, and doing so may cause other operations in other services to fail until the Identity resource has been replicated. For example, the request to CreateTag in the Identity service in the home region succeeds, but immediately using that created tag in another region in a request to LaunchInstance in the Compute service may fail. If you are creating, updating, or deleting resources in the Identity service, we recommend using an eventually consistent retry policy for any service you access. The default retry policy already deals with eventual consistency. Example: This retry policy will use a different strategy if an eventually consistent change was made in the recent past (called the "eventually consistent window", currently defined to be 4 minutes after the eventually consistent change). This special retry policy for eventual consistency will: 1. make up to 9 attempts (including the initial attempt); if an attempt is successful, no more attempts will be made 2. retry at most until (a) approximately the end of the eventually consistent window or (b) the end of the default retry period of about 1.5 minutes, whichever is farther in the future; if an attempt is successful, no more attempts will be made, and the OCI Go SDK will not wait any longer 3. retry on the error codes 400-RelatedResourceNotAuthorizedOrNotFound, 404-NotAuthorizedOrNotFound, and 409-NotAuthorizedOrResourceAlreadyExists, for which the default retry policy does not retry, in addition to the errors the default retry policy retries on (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm) If there were no eventually consistent actions within the recent past, then this special retry strategy is not used. If you want a retry policy that does not handle eventual consistency in a special way, for example because you retry on all error responses, you can use DefaultRetryPolicyWithoutEventualConsistency or NewRetryPolicyWithOptions with the common.ReplaceWithValuesFromRetryPolicy(common.DefaultRetryPolicyWithoutEventualConsistency()) option: The NewRetryPolicy function also creates a retry policy without eventual consistency. Circuit Breaker can prevent an application repeatedly trying to execute an operation that is likely to fail, allowing it to continue without waiting for the fault to be rectified or wasting CPU cycles, of course, it also enables an application to detect whether the fault has been resolved. If the problem appears to have been rectified, the application can attempt to invoke the operation. Go SDK intergrates sony/gobreaker solution, wraps in a circuit breaker object, which monitors for failures. Once the failures reach a certain threshold, the circuit breaker trips, and all further calls to the circuit breaker return with an error, this also saves the service from being overwhelmed with network calls in case of an outage. Circuit Breaker Configuration Definitions 1. Failure Rate Threshold - The state of the CircuitBreaker changes from CLOSED to OPEN when the failure rate is equal or greater than a configurable threshold. For example when more than 50% of the recorded calls have failed. 2. Reset Timeout - The timeout after which an open circuit breaker will attempt a request if a request is made 3. Failure Exceptions - The list of Exceptions that will be regarded as failures for the circuit. 4. Minimum number of calls/ Volume threshold - Configures the minimum number of calls which are required (per sliding window period) before the CircuitBreaker can calculate the error rate. 1. Failure Rate Threshold - 80% - This means when 80% of the requests calculated for a time window of 120 seconds have failed then the circuit will transition from closed to open. 2. Minimum number of calls/ Volume threshold - A value of 10, for the above defined time window of 120 seconds. 3. Reset Timeout - 30 seconds to wait before setting the breaker to halfOpen state, and trying the action again. 4. Failure Exceptions - The failures for the circuit will only be recorded for the retryable/transient exceptions. This means only the following exceptions will be regarded as failure for the circuit. HTTP Code Customer-facing Error Code Apart from the above, the following client side exceptions will also be treated as a failure for the circuit : 1. HTTP Connection timeout 2. Request Connection Errors 3. Request Exceptions 4. Other timeouts (like Read Timeout) Go SDK enable circuit breaker with default configuration for most of the service clients, if you don't want to enable the solution, can disable the functionality before your application running Go SDK also supports customize Circuit Breaker with specified configurations. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_circuitbreaker_test.go To know which service clients have circuit breakers enabled, look at the service client's description in the SDK - it will say whether that it has circuit breakers enabled by default As a result of the SDK treating responses with a non-2xx HTTP status code as an error, the SDK will produce an error on 3xx responses. This can impact operations which support conditional GETs, such as GetObject() and HeadObject() methods as these can return responses with an HTTP status code of 304 if passed an 'IfNoneMatch' that corresponds to the current etag of the object / bucket. In order to account for this, you should check for status code 304 when an error is produced. For example: The GO SDK uses the net/http package to make calls to OCI services. If your environment requires you to use a proxy server for outgoing HTTP requests then you can set this up in the following ways: 1. Configuring environment variable as described here https://golang.org/pkg/net/http/#ProxyFromEnvironment 2. Modifying the underlying Transport struct for a service client In order to modify the underlying Transport struct in HttpClient, you can do something similar to (sample code for audit service client): The Object Storage service supports multipart uploads to make large object uploads easier by splitting the large object into parts. The Go SDK supports raw multipart upload operations for advanced use cases, as well as a higher level upload class that uses the multipart upload APIs. For links to the APIs used for multipart upload operations, see Managing Multipart Uploads (https://docs.cloud.oracle.com/iaas/Content/Object/Tasks/usingmultipartuploads.htm). Higher level multipart uploads are implemented using the UploadManager, which will: split a large object into parts for you, upload the parts in parallel, and then recombine and commit the parts as a single object in storage. This code sample shows how to use the UploadManager to automatically split an object into parts for upload to simplify interaction with the Object Storage service: https://github.com/oracle/oci-go-sdk/blob/master/example/example_objectstorage_test.go Some response fields are enum-typed. In the future, individual services may return values not covered by existing enums for that field. To address this possibility, every enum-type response field is a modeled as a type that supports any string. Thus if a service returns a value that is not recognized by your version of the SDK, then the response field will be set to this value. When individual services return a polymorphic JSON response not available as a concrete struct, the SDK will return an implementation that only satisfies the interface modeling the polymorphic JSON response. If you are using a version of the SDK released prior to the announcement of a new region, you may need to use a workaround to reach it, depending on whether the region is in the oraclecloud.com realm. A region is a localized geographic area. For more information on regions and how to identify them, see Regions and Availability Domains(https://docs.cloud.oracle.com/iaas/Content/General/Concepts/regions.htm). A realm is a set of regions that share entities. You can identify your realm by looking at the domain name at the end of the network address. For example, the realm for xyz.abc.123.oraclecloud.com is oraclecloud.com. oraclecloud.com Realm: For regions in the oraclecloud.com realm, even if common.Region does not contain the new region, the forward compatibility of the SDK can automatically handle it. You can pass new region names just as you would pass ones that are already defined. For more information on passing region names in the configuration, see Configuring (https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring). For details on common.Region, see (https://github.com/oracle/oci-go-sdk/blob/master/common/common.go). Other Realms: For regions in realms other than oraclecloud.com, you can use the following workarounds to reach new regions with earlier versions of the SDK. NOTE: Be sure to supply the appropriate endpoints for your region. You can overwrite the target host with client.Host: If you are authenticating via instance principals, you can set the authentication endpoint in an environment variable: In order to use a custom CA bundle, you can set the environment variable OCI_DEFAULT_CERTS_PATH to point to the path of custom CA Bundle you want the OCI GO SDK to use while making API calls to the OCI services If you additionally want to set custom leaf/client certs, then you can use the the environment variables OCI_DEFAULT_CLIENT_CERTS_PATH and OCI_DEFAULT_CLIENT_CERTS_PRIVATE_KEY_PATH to set the path of the custom client/leaf cert and the private key respectively. The default refresh interval for custom CA bundle or client certs is 30 minutes. If you want to modify this, then you can configure the refresh interval in minutes by using either the Global property OciGlobalRefreshIntervalForCustomCerts defined in the common package or set the environment variable OCI_DEFAULT_REFRESH_INTERVAL_FOR_CUSTOM_CERTS to set it instead. Please note, that the property OciGlobalRefreshIntervalForCustomCerts has a higher precedence than the environment variable OCI_DEFAULT_REFRESH_INTERVAL_FOR_CUSTOM_CERTS. If this value is negative, then it would be assumed that it is unset. If it is set to 0, then the SDK would disable the custom ca bundle and client cert refresh Got a fix for a bug, or a new feature you'd like to contribute? The SDK is open source and accepting pull requests on GitHub https://github.com/oracle/oci-go-sdk Licensing information available at: https://github.com/oracle/oci-go-sdk/blob/master/LICENSE.txt To be notified when a new version of the Go SDK is released, subscribe to the following feed: https://github.com/oracle/oci-go-sdk/releases.atom Please refer to this link: https://github.com/oracle/oci-go-sdk#help
This is the official Go SDK for Oracle Cloud Infrastructure Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#installing for installation instructions. Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring for configuration instructions. The following example shows how to get started with the SDK. The example belows creates an identityClient struct with the default configuration. It then utilizes the identityClient to list availability domains and prints them out to stdout More examples can be found in the SDK Github repo: https://github.com/oracle/oci-go-sdk/tree/master/example Optional fields are represented with the `mandatory:"false"` tag on input structs. The SDK will omit all optional fields that are nil when making requests. In the case of enum-type fields, the SDK will omit fields whose value is an empty string. The SDK uses pointers for primitive types in many input structs. To aid in the construction of such structs, the SDK provides functions that return a pointer for a given value. For example: The SDK exposes functionality that allows the user to customize any http request before is sent to the service. You can do so by setting the `Interceptor` field in any of the `Client` structs. For example: The Interceptor closure gets called before the signing process, thus any changes done to the request will be properly signed and submitted to the service. The SDK exposes a stand-alone signer that can be used to signing custom requests. Related code can be found here: https://github.com/oracle/oci-go-sdk/blob/master/common/http_signer.go. The example below shows how to create a default signer. The signer also allows more granular control on the headers used for signing. For example: You can combine a custom signer with the exposed clients in the SDK. This allows you to add custom signed headers to the request. Following is an example: Bear in mind that some services have a white list of headers that it expects to be signed. Therefore, adding an arbitrary header can result in authentications errors. To see a runnable example, see https://github.com/oracle/oci-go-sdk/blob/master/example/example_identity_test.go For more information on the signing algorithm refer to: https://docs.cloud.oracle.com/Content/API/Concepts/signingrequests.htm Some operations accept or return polymorphic JSON objects. The SDK models such objects as interfaces. Further the SDK provides structs that implement such interfaces. Thus, for all operations that expect interfaces as input, pass the struct in the SDK that satisfies such interface. For example: In the case of a polymorphic response you can type assert the interface to the expected type. For example: An example of polymorphic JSON request handling can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_test.go#L63 When calling a list operation, the operation will retrieve a page of results. To retrieve more data, call the list operation again, passing in the value of the most recent response's OpcNextPage as the value of Page in the next list operation call. When there is no more data the OpcNextPage field will be nil. An example of pagination using this logic can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_pagination_test.go The SDK has a built-in logging mechanism used internally. The internal logging logic is used to record the raw http requests, responses and potential errors when (un)marshalling request and responses. Built-in logging in the SDK is controlled via the environment variable "OCI_GO_SDK_DEBUG" and its contents. The below are possible values for the "OCI_GO_SDK_DEBUG" variable 1. "info" or "i" enables all info logging messages 2. "debug" or "d" enables all debug and info logging messages 3. "verbose" or "v" or "1" enables all verbose, debug and info logging messages 4. "null" turns all logging messages off. If the value of the environment variable does not match any of the above then default logging level is "info". If the environment variable is not present then no logging messages are emitted. The default destination for logging is Stderr and if you want to output log to a file you can set via environment variable "OCI_GO_SDK_LOG_OUTPUT_MODE". The below are possible values 1. "file" or "f" enables all logging output saved to file 2. "combine" or "c" enables all logging output to both stderr and file You can also customize the log file location and name via "OCI_GO_SDK_LOG_FILE" environment variable, the value should be the path to a specific file If this environment variable is not present, the default location will be the project root path Sometimes you may need to wait until an attribute of a resource, such as an instance or a VCN, reaches a certain state. An example of this would be launching an instance and then waiting for the instance to become available, or waiting until a subnet in a VCN has been terminated. You might also want to retry the same operation again if there's network issue etc... This can be accomplished by using the RequestMetadata.RetryPolicy(request level configuration), alternatively, global(all services) or client level RetryPolicy configration is also possible. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_retry_test.go If you are trying to make a PUT/POST API call with binary request body, please make sure the binary request body is resettable, which means the request body should inherit Seeker interface. The Retry behavior Precedence (Highest to lowest) is defined as below:- The OCI Go SDK defines a default retry policy that retries on the errors suitable for retries (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm), for a recommended period of time (up to 7 attempts spread out over at most approximately 1.5 minutes). The default retry policy is defined by : Default Retry-able Errors Below is the list of default retry-able errors for which retry attempts should be made. The following errors should be retried (with backoff). HTTP Code Customer-facing Error Code Apart from the above errors, retries should also be attempted in the following Client Side errors : 1. HTTP Connection timeout 2. Request Connection Errors 3. Request Exceptions 4. Other timeouts (like Read Timeout) The above errors can be avoided through retrying and hence, are classified as the default retry-able errors. Additionally, retries should also be made for Circuit Breaker exceptions (Exceptions raised by Circuit Breaker in an open state) Default Termination Strategy The termination strategy defines when SDKs should stop attempting to retry. In other words, it's the deadline for retries. The OCI SDKs should stop retrying the operation after 7 retry attempts. This means the SDKs will have retried for ~98 seconds or ~1.5 minutes have elapsed due to total delays. SDKs will make a total of 8 attempts. (1 initial request + 7 retries) Default Delay Strategy Default Delay Strategy - The delay strategy defines the amount of time to wait between each of the retry attempts. The default delay strategy chosen for the SDK – Exponential backoff with jitter, using: 1. The base time to use in retry calculations will be 1 second 2. An exponent of 2. When calculating the next retry time, the SDK will raise this to the power of the number of attempts 3. A maximum wait time between calls of 30 seconds (Capped) 4. Added jitter value between 0-1000 milliseconds to spread out the requests Configure and use default retry policy You can set this retry policy for a single request: or for all requests made by a client: or for all requests made by all clients: or setting default retry via environment varaible, which is a global switch for all services: Some services enable retry for operations by default, this can be overridden using any alternatives mentioned above. To know which service operations have retries enabled by default, look at the operation's description in the SDK - it will say whether that it has retries enabled by default Some resources may have to be replicated across regions and are only eventually consistent. That means the request to create, update, or delete the resource succeeded, but the resource is not available everywhere immediately. Creating, updating, or deleting any resource in the Identity service is affected by eventual consistency, and doing so may cause other operations in other services to fail until the Identity resource has been replicated. For example, the request to CreateTag in the Identity service in the home region succeeds, but immediately using that created tag in another region in a request to LaunchInstance in the Compute service may fail. If you are creating, updating, or deleting resources in the Identity service, we recommend using an eventually consistent retry policy for any service you access. The default retry policy already deals with eventual consistency. Example: This retry policy will use a different strategy if an eventually consistent change was made in the recent past (called the "eventually consistent window", currently defined to be 4 minutes after the eventually consistent change). This special retry policy for eventual consistency will: 1. make up to 9 attempts (including the initial attempt); if an attempt is successful, no more attempts will be made 2. retry at most until (a) approximately the end of the eventually consistent window or (b) the end of the default retry period of about 1.5 minutes, whichever is farther in the future; if an attempt is successful, no more attempts will be made, and the OCI Go SDK will not wait any longer 3. retry on the error codes 400-RelatedResourceNotAuthorizedOrNotFound, 404-NotAuthorizedOrNotFound, and 409-NotAuthorizedOrResourceAlreadyExists, for which the default retry policy does not retry, in addition to the errors the default retry policy retries on (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm) If there were no eventually consistent actions within the recent past, then this special retry strategy is not used. If you want a retry policy that does not handle eventual consistency in a special way, for example because you retry on all error responses, you can use DefaultRetryPolicyWithoutEventualConsistency or NewRetryPolicyWithOptions with the common.ReplaceWithValuesFromRetryPolicy(common.DefaultRetryPolicyWithoutEventualConsistency()) option: The NewRetryPolicy function also creates a retry policy without eventual consistency. Circuit Breaker can prevent an application repeatedly trying to execute an operation that is likely to fail, allowing it to continue without waiting for the fault to be rectified or wasting CPU cycles, of course, it also enables an application to detect whether the fault has been resolved. If the problem appears to have been rectified, the application can attempt to invoke the operation. Go SDK intergrates sony/gobreaker solution, wraps in a circuit breaker object, which monitors for failures. Once the failures reach a certain threshold, the circuit breaker trips, and all further calls to the circuit breaker return with an error, this also saves the service from being overwhelmed with network calls in case of an outage. Circuit Breaker Configuration Definitions 1. Failure Rate Threshold - The state of the CircuitBreaker changes from CLOSED to OPEN when the failure rate is equal or greater than a configurable threshold. For example when more than 50% of the recorded calls have failed. 2. Reset Timeout - The timeout after which an open circuit breaker will attempt a request if a request is made 3. Failure Exceptions - The list of Exceptions that will be regarded as failures for the circuit. 4. Minimum number of calls/ Volume threshold - Configures the minimum number of calls which are required (per sliding window period) before the CircuitBreaker can calculate the error rate. 1. Failure Rate Threshold - 80% - This means when 80% of the requests calculated for a time window of 120 seconds have failed then the circuit will transition from closed to open. 2. Minimum number of calls/ Volume threshold - A value of 10, for the above defined time window of 120 seconds. 3. Reset Timeout - 30 seconds to wait before setting the breaker to halfOpen state, and trying the action again. 4. Failure Exceptions - The failures for the circuit will only be recorded for the retryable/transient exceptions. This means only the following exceptions will be regarded as failure for the circuit. HTTP Code Customer-facing Error Code Apart from the above, the following client side exceptions will also be treated as a failure for the circuit : 1. HTTP Connection timeout 2. Request Connection Errors 3. Request Exceptions 4. Other timeouts (like Read Timeout) Go SDK enable circuit breaker with default configuration for most of the service clients, if you don't want to enable the solution, can disable the functionality before your application running Go SDK also supports customize Circuit Breaker with specified configurations. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_circuitbreaker_test.go To know which service clients have circuit breakers enabled, look at the service client's description in the SDK - it will say whether that it has circuit breakers enabled by default The GO SDK uses the net/http package to make calls to OCI services. If your environment requires you to use a proxy server for outgoing HTTP requests then you can set this up in the following ways: 1. Configuring environment variable as described here https://golang.org/pkg/net/http/#ProxyFromEnvironment 2. Modifying the underlying Transport struct for a service client In order to modify the underlying Transport struct in HttpClient, you can do something similar to (sample code for audit service client): The Object Storage service supports multipart uploads to make large object uploads easier by splitting the large object into parts. The Go SDK supports raw multipart upload operations for advanced use cases, as well as a higher level upload class that uses the multipart upload APIs. For links to the APIs used for multipart upload operations, see Managing Multipart Uploads (https://docs.cloud.oracle.com/iaas/Content/Object/Tasks/usingmultipartuploads.htm). Higher level multipart uploads are implemented using the UploadManager, which will: split a large object into parts for you, upload the parts in parallel, and then recombine and commit the parts as a single object in storage. This code sample shows how to use the UploadManager to automatically split an object into parts for upload to simplify interaction with the Object Storage service: https://github.com/oracle/oci-go-sdk/blob/master/example/example_objectstorage_test.go Some response fields are enum-typed. In the future, individual services may return values not covered by existing enums for that field. To address this possibility, every enum-type response field is a modeled as a type that supports any string. Thus if a service returns a value that is not recognized by your version of the SDK, then the response field will be set to this value. When individual services return a polymorphic JSON response not available as a concrete struct, the SDK will return an implementation that only satisfies the interface modeling the polymorphic JSON response. If you are using a version of the SDK released prior to the announcement of a new region, you may need to use a workaround to reach it, depending on whether the region is in the oraclecloud.com realm. A region is a localized geographic area. For more information on regions and how to identify them, see Regions and Availability Domains(https://docs.cloud.oracle.com/iaas/Content/General/Concepts/regions.htm). A realm is a set of regions that share entities. You can identify your realm by looking at the domain name at the end of the network address. For example, the realm for xyz.abc.123.oraclecloud.com is oraclecloud.com. oraclecloud.com Realm: For regions in the oraclecloud.com realm, even if common.Region does not contain the new region, the forward compatibility of the SDK can automatically handle it. You can pass new region names just as you would pass ones that are already defined. For more information on passing region names in the configuration, see Configuring (https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring). For details on common.Region, see (https://github.com/oracle/oci-go-sdk/blob/master/common/common.go). Other Realms: For regions in realms other than oraclecloud.com, you can use the following workarounds to reach new regions with earlier versions of the SDK. NOTE: Be sure to supply the appropriate endpoints for your region. You can overwrite the target host with client.Host: If you are authenticating via instance principals, you can set the authentication endpoint in an environment variable: Got a fix for a bug, or a new feature you'd like to contribute? The SDK is open source and accepting pull requests on GitHub https://github.com/oracle/oci-go-sdk Licensing information available at: https://github.com/oracle/oci-go-sdk/blob/master/LICENSE.txt To be notified when a new version of the Go SDK is released, subscribe to the following feed: https://github.com/oracle/oci-go-sdk/releases.atom Please refer to this link: https://github.com/oracle/oci-go-sdk#help
Package stackdriver contains the OpenCensus exporters for Stackdriver Monitoring and Stackdriver Tracing. This exporter can be used to send metrics to Stackdriver Monitoring and traces to Stackdriver trace. The package uses Application Default Credentials to authenticate by default. See: https://developers.google.com/identity/protocols/application-default-credentials Alternatively, pass the authentication options in both the MonitoringClientOptions and the TraceClientOptions fields of Options. This exporter support exporting OpenCensus views to Stackdriver Monitoring. Each registered view becomes a metric in Stackdriver Monitoring, with the tags becoming labels. The aggregation function determines the metric kind: LastValue aggregations generate Gauge metrics and all other aggregations generate Cumulative metrics. In order to be able to push your stats to Stackdriver Monitoring, you must: These steps enable the API but don't require that your app is hosted on Google Cloud Platform. This exporter supports exporting Trace Spans to Stackdriver Trace. It also supports the Google "Cloud Trace" propagation format header.
Package bolthold is an indexing and querying layer on top of a Bolt DB. The goal is to allow easy, persistent storage and retrieval of Go types. BoltDB is an embedded key-value store, and bolthold servers a similar use case however with a higher level interface for common uses of BoltDB. BoltHold deals directly with Go Types. When inserting data, you pass in your structure directly. When querying data you pass in a pointer to a slice of the type you want to return. By default Gob encoding is used. You can put multiple different types into the same DB file and they (and their indexes) will be stored separately. BoltHold will automatically create an index for any struct fields tags with "boltholdIndex" The first field specified in query will be used as the index (if one exists). Queries are chained together criteria that applies to a set of fields:
Package ivschat provides the API client, operations, and parameter types for Amazon Interactive Video Service Chat. The Amazon IVS Chat control-plane API enables you to create and manage Amazon IVS Chat resources. You also need to integrate with the Amazon IVS Chat Messaging API, to enable users to interact with chat rooms in real time. The API is an AWS regional service. For a list of supported regions and Amazon IVS Chat HTTPS service endpoints, see the Amazon IVS Chat information on the Amazon IVS pagein the AWS General Reference. Notes on terminology: You create service applications using the Amazon IVS Chat API. We refer to these as applications. You create front-end client applications (browser and Android/iOS apps) using the Amazon IVS Chat Messaging API. We refer to these as clients. Key Concepts LoggingConfiguration — A configuration that allows customers to store and record sent messages in a chat room. Room — The central Amazon IVS Chat resource through which clients connect to and exchange chat messages. A tag is a metadata label that you assign to an AWS resource. A tag comprises a key and a value, both set by you. For example, you might set a tag as topic:nature to label a particular video category. See Tagging AWS Resources for more information, including restrictions that apply to tags and "Tag naming limits and requirements"; Amazon IVS Chat has no service-specific constraints beyond what is documented there. Tags can help you identify and organize your AWS resources. For example, you can use the same tag for different resources to indicate that they are related. You can also use tags to manage access (see Access Tags). The Amazon IVS Chat API has these tag-related endpoints: TagResource, UntagResource, and ListTagsForResource. The following resource supports tagging: Room. At most 50 tags can be applied to a resource. Your Amazon IVS Chat applications (service applications and clients) must be authenticated and authorized to access Amazon IVS Chat resources. Note the differences between these concepts: Authentication is about verifying identity. Requests to the Amazon IVS Chat API must be signed to verify your identity. Authorization is about granting permissions. Your IAM roles need to have permissions for Amazon IVS Chat API requests. Users (viewers) connect to a room using secure access tokens that you create using the CreateChatTokenendpoint through the AWS SDK. You call CreateChatToken for every user’s chat session, passing identity and authorization information about the user. HTTP API requests must be signed with an AWS SigV4 signature using your AWS security credentials. The AWS Command Line Interface (CLI) and the AWS SDKs take care of signing the underlying API calls for you. However, if your application calls the Amazon IVS Chat HTTP API directly, it’s your responsibility to sign the requests. You generate a signature using valid AWS credentials for an IAM role that has permission to perform the requested action. For example, DeleteMessage requests must be made using an IAM role that has the ivschat:DeleteMessage permission. For more information: Authentication and generating signatures — See Authenticating Requests (Amazon Web Services Signature Version 4)in the Amazon Web Services General Reference. Managing Amazon IVS permissions — See Identity and Access Managementon the Security page of the Amazon IVS User Guide. Amazon Resource Names (ARNs) ARNs uniquely identify AWS resources. An ARN is required when you need to specify a resource unambiguously across all of AWS, such as in IAM policies and API calls. For more information, see Amazon Resource Namesin the AWS General Reference. DeleteMessage DisconnectUser SendEvent CreateChatToken CreateRoom DeleteRoom GetRoom ListRooms UpdateRoom CreateLoggingConfiguration DeleteLoggingConfiguration GetLoggingConfiguration ListLoggingConfigurations UpdateLoggingConfiguration ListTagsForResource TagResource UntagResource All the above are HTTP operations. There is a separate messaging API for managing Chat resources; see the Amazon IVS Chat Messaging API Reference.
Package cbor provides a fuzz-tested CBOR encoder and decoder with full support for float16, Canonical CBOR, CTAP2 Canonical CBOR, and custom settings. https://github.com/fxamacker/cbor/releases Encoding options allow "preferred serialization" by encoding integers and floats to their smallest forms (like float16) when values fit. Go struct tags like `cbor:"name,omitempty"` and `json:"name,omitempty"` work as expected. If both struct tags are specified then `cbor` is used. Struct tags like "keyasint", "toarray", and "omitempty" make it easy to use very compact formats like COSE and CWT (CBOR Web Tokens) with structs. For example, the "toarray" struct tag encodes/decodes struct fields as array elements. And "keyasint" struct tag encodes/decodes struct fields to values of maps with specified int keys. fxamacker/cbor-fuzz provides coverage-guided fuzzing for this package. For latest API docs, see: https://github.com/fxamacker/cbor#api
Package grocksdb provides the ability to create and access RocksDB databases. grocksdb.OpenDb opens and creates databases. The DB struct returned by OpenDb provides DB.Get, DB.Put, DB.Merge and DB.Delete to modify and query the database. For bulk reads, use an Iterator. If you want to avoid disturbing your live traffic while doing the bulk read, be sure to call SetFillCache(false) on the ReadOptions you use when creating the Iterator. Batched, atomic writes can be performed with a WriteBatch and DB.Write. If your working dataset does not fit in memory, you'll want to add a bloom filter to your database. NewBloomFilter and BlockBasedTableOptions.SetFilterPolicy is what you want. NewBloomFilter is amount of bits in the filter to use per key in your database. If you're using a custom comparator in your code, be aware you may have to make your own filter policy object. This documentation is not a complete discussion of RocksDB. Please read the RocksDB documentation <http://rocksdb.org/> for information on its operation. You'll find lots of goodies there. The default link options, to customize it, you can try build tag `grocksdb_clean_link` for a cleaner set of flags, or `grocksdb_no_link` where you have full control through `CGO_LDFLAGS` environment variable.
Package reflections provides high level abstractions above the reflect library. Reflect library is very low-level and as can be quite complex when it comes to do simple things like accessing a structure field value, a field tag... The purpose of reflections package is to make developers life easier when it comes to introspect structures at runtime. It's API is freely inspired from python language (getattr, setattr, hasattr...) and provides a simplified access to structure fields and tags.
Package pointer implements Andersen's analysis, an inclusion-based pointer analysis algorithm first described in (Andersen, 1994). A pointer analysis relates every pointer expression in a whole program to the set of memory locations to which it might point. This information can be used to construct a call graph of the program that precisely represents the destinations of dynamic function and method calls. It can also be used to determine, for example, which pairs of channel operations operate on the same channel. The package allows the client to request a set of expressions of interest for which the points-to information will be returned once the analysis is complete. In addition, the client may request that a callgraph is constructed. The example program in example_test.go demonstrates both of these features. Clients should not request more information than they need since it may increase the cost of the analysis significantly. Our algorithm is INCLUSION-BASED: the points-to sets for x and y will be related by pts(y) ⊇ pts(x) if the program contains the statement y = x. It is FLOW-INSENSITIVE: it ignores all control flow constructs and the order of statements in a program. It is therefore a "MAY ALIAS" analysis: its facts are of the form "P may/may not point to L", not "P must point to L". It is FIELD-SENSITIVE: it builds separate points-to sets for distinct fields, such as x and y in struct { x, y *int }. It is mostly CONTEXT-INSENSITIVE: most functions are analyzed once, so values can flow in at one call to the function and return out at another. Only some smaller functions are analyzed with consideration of their calling context. It has a CONTEXT-SENSITIVE HEAP: objects are named by both allocation site and context, so the objects returned by two distinct calls to f: are distinguished up to the limits of the calling context. It is a WHOLE PROGRAM analysis: it requires SSA-form IR for the complete Go program and summaries for native code. See the (Hind, PASTE'01) survey paper for an explanation of these terms. The analysis is fully sound when invoked on pure Go programs that do not use reflection or unsafe.Pointer conversions. In other words, if there is any possible execution of the program in which pointer P may point to object O, the analysis will report that fact. By default, the "reflect" library is ignored by the analysis, as if all its functions were no-ops, but if the client enables the Reflection flag, the analysis will make a reasonable attempt to model the effects of calls into this library. However, this comes at a significant performance cost, and not all features of that library are yet implemented. In addition, some simplifying approximations must be made to ensure that the analysis terminates; for example, reflection can be used to construct an infinite set of types and values of those types, but the analysis arbitrarily bounds the depth of such types. Most but not all reflection operations are supported. In particular, addressable reflect.Values are not yet implemented, so operations such as (reflect.Value).Set have no analytic effect. The pointer analysis makes no attempt to understand aliasing between the operand x and result y of an unsafe.Pointer conversion: It is as if the conversion allocated an entirely new object: The analysis cannot model the aliasing effects of functions written in languages other than Go, such as runtime intrinsics in C or assembly, or code accessed via cgo. The result is as if such functions are no-ops. However, various important intrinsics are understood by the analysis, along with built-ins such as append. The analysis currently provides no way for users to specify the aliasing effects of native code. ------------------------------------------------------------------------ The remaining documentation is intended for package maintainers and pointer analysis specialists. Maintainers should have a solid understanding of the referenced papers (especially those by H&L and PKH) before making making significant changes. The implementation is similar to that described in (Pearce et al, PASTE'04). Unlike many algorithms which interleave constraint generation and solving, constructing the callgraph as they go, this implementation for the most part observes a phase ordering (generation before solving), with only simple (copy) constraints being generated during solving. (The exception is reflection, which creates various constraints during solving as new types flow to reflect.Value operations.) This improves the traction of presolver optimisations, but imposes certain restrictions, e.g. potential context sensitivity is limited since all variants must be created a priori. A type is said to be "pointer-like" if it is a reference to an object. Pointer-like types include pointers and also interfaces, maps, channels, functions and slices. We occasionally use C's x->f notation to distinguish the case where x is a struct pointer from x.f where is a struct value. Pointer analysis literature (and our comments) often uses the notation dst=*src+offset to mean something different than what it means in Go. It means: for each node index p in pts(src), the node index p+offset is in pts(dst). Similarly *dst+offset=src is used for store constraints and dst=src+offset for offset-address constraints. Nodes are the key datastructure of the analysis, and have a dual role: they represent both constraint variables (equivalence classes of pointers) and members of points-to sets (things that can be pointed at, i.e. "labels"). Nodes are naturally numbered. The numbering enables compact representations of sets of nodes such as bitvectors (or BDDs); and the ordering enables a very cheap way to group related nodes together. For example, passing n parameters consists of generating n parallel constraints from caller+i to callee+i for 0<=i<n. The zero nodeid means "not a pointer". For simplicity, we generate flow constraints even for non-pointer types such as int. The pointer equivalence (PE) presolver optimization detects which variables cannot point to anything; this includes not only all variables of non-pointer types (such as int) but also variables of pointer-like types if they are always nil, or are parameters to a function that is never called. Each node represents a scalar part of a value or object. Aggregate types (structs, tuples, arrays) are recursively flattened out into a sequential list of scalar component types, and all the elements of an array are represented by a single node. (The flattening of a basic type is a list containing a single node.) Nodes are connected into a graph with various kinds of labelled edges: simple edges (or copy constraints) represent value flow. Complex edges (load, store, etc) trigger the creation of new simple edges during the solving phase. Conceptually, an "object" is a contiguous sequence of nodes denoting an addressable location: something that a pointer can point to. The first node of an object has a non-nil obj field containing information about the allocation: its size, context, and ssa.Value. Objects include: Many objects have no Go types. For example, the func, map and chan type kinds in Go are all varieties of pointers, but their respective objects are actual functions (executable code), maps (hash tables), and channels (synchronized queues). Given the way we model interfaces, they too are pointers to "tagged" objects with no Go type. And an *ssa.Global denotes the address of a global variable, but the object for a Global is the actual data. So, the types of an ssa.Value that creates an object is "off by one indirection": a pointer to the object. The individual nodes of an object are sometimes referred to as "labels". For uniformity, all objects have a non-zero number of fields, even those of the empty type struct{}. (All arrays are treated as if of length 1, so there are no empty arrays. The empty tuple is never address-taken, so is never an object.) An tagged object has the following layout: The T node's typ field is the dynamic type of the "payload": the value v which follows, flattened out. The T node's obj has the otTagged flag. Tagged objects are needed when generalizing across types: interfaces, reflect.Values, reflect.Types. Each of these three types is modelled as a pointer that exclusively points to tagged objects. Tagged objects may be indirect (obj.flags ⊇ {otIndirect}) meaning that the value v is not of type T but *T; this is used only for reflect.Values that represent lvalues. (These are not implemented yet.) Variables of the following "scalar" types may be represented by a single node: basic types, pointers, channels, maps, slices, 'func' pointers, interfaces. Pointers: Nothing to say here, oddly. Basic types (bool, string, numbers, unsafe.Pointer): Currently all fields in the flattening of a type, including non-pointer basic types such as int, are represented in objects and values. Though non-pointer nodes within values are uninteresting, non-pointer nodes in objects may be useful (if address-taken) because they permit the analysis to deduce, in this example, that p points to s.x. If we ignored such object fields, we could only say that p points somewhere within s. All other basic types are ignored. Expressions of these types have zero nodeid, and fields of these types within aggregate other types are omitted. unsafe.Pointers are not modelled as pointers, so a conversion of an unsafe.Pointer to *T is (unsoundly) treated equivalent to new(T). Channels: An expression of type 'chan T' is a kind of pointer that points exclusively to channel objects, i.e. objects created by MakeChan (or reflection). 'chan T' is treated like *T. *ssa.MakeChan is treated as equivalent to new(T). *ssa.Send and receive (*ssa.UnOp(ARROW)) and are equivalent to store Maps: An expression of type 'map[K]V' is a kind of pointer that points exclusively to map objects, i.e. objects created by MakeMap (or reflection). map K[V] is treated like *M where M = struct{k K; v V}. *ssa.MakeMap is equivalent to new(M). *ssa.MapUpdate is equivalent to *y=x where *y and x have type M. *ssa.Lookup is equivalent to y=x.v where x has type *M. Slices: A slice []T, which dynamically resembles a struct{array *T, len, cap int}, is treated as if it were just a *T pointer; the len and cap fields are ignored. *ssa.MakeSlice is treated like new([1]T): an allocation of a *ssa.Index on a slice is equivalent to a load. *ssa.IndexAddr on a slice returns the address of the sole element of the slice, i.e. the same address. *ssa.Slice is treated as a simple copy. Functions: An expression of type 'func...' is a kind of pointer that points exclusively to function objects. A function object has the following layout: There may be multiple function objects for the same *ssa.Function due to context-sensitive treatment of some functions. The first node is the function's identity node. Associated with every callsite is a special "targets" variable, whose pts() contains the identity node of each function to which the call may dispatch. Identity words are not otherwise used during the analysis, but we construct the call graph from the pts() solution for such nodes. The following block of contiguous nodes represents the flattened-out types of the parameters ("P-block") and results ("R-block") of the function object. The treatment of free variables of closures (*ssa.FreeVar) is like that of global variables; it is not context-sensitive. *ssa.MakeClosure instructions create copy edges to Captures. A Go value of type 'func' (i.e. a pointer to one or more functions) is a pointer whose pts() contains function objects. The valueNode() for an *ssa.Function returns a singleton for that function. Interfaces: An expression of type 'interface{...}' is a kind of pointer that points exclusively to tagged objects. All tagged objects pointed to by an interface are direct (the otIndirect flag is clear) and concrete (the tag type T is not itself an interface type). The associated ssa.Value for an interface's tagged objects may be an *ssa.MakeInterface instruction, or nil if the tagged object was created by an instrinsic (e.g. reflection). Constructing an interface value causes generation of constraints for all of the concrete type's methods; we can't tell a priori which ones may be called. TypeAssert y = x.(T) is implemented by a dynamic constraint triggered by each tagged object O added to pts(x): a typeFilter constraint if T is an interface type, or an untag constraint if T is a concrete type. A typeFilter tests whether O.typ implements T; if so, O is added to pts(y). An untagFilter tests whether O.typ is assignable to T,and if so, a copy edge O.v -> y is added. ChangeInterface is a simple copy because the representation of tagged objects is independent of the interface type (in contrast to the "method tables" approach used by the gc runtime). y := Invoke x.m(...) is implemented by allocating contiguous P/R blocks for the callsite and adding a dynamic rule triggered by each tagged object added to pts(x). The rule adds param/results copy edges to/from each discovered concrete method. (Q. Why do we model an interface as a pointer to a pair of type and value, rather than as a pair of a pointer to type and a pointer to value? A. Control-flow joins would merge interfaces ({T1}, {V1}) and ({T2}, {V2}) to make ({T1,T2}, {V1,V2}), leading to the infeasible and type-unsafe combination (T1,V2). Treating the value and its concrete type as inseparable makes the analysis type-safe.) Type parameters: Type parameters are not directly supported by the analysis. Calls to generic functions will be left as if they had empty bodies. Users of the package are expected to use the ssa.InstantiateGenerics builder mode when building code that uses or depends on code containing generics. reflect.Value: A reflect.Value is modelled very similar to an interface{}, i.e. as a pointer exclusively to tagged objects, but with two generalizations. 1. a reflect.Value that represents an lvalue points to an indirect (obj.flags ⊇ {otIndirect}) tagged object, which has a similar layout to an tagged object except that the value is a pointer to the dynamic type. Indirect tagged objects preserve the correct aliasing so that mutations made by (reflect.Value).Set can be observed. Indirect objects only arise when an lvalue is derived from an rvalue by indirection, e.g. the following code: Whether indirect or not, the concrete type of the tagged object corresponds to the user-visible dynamic type, and the existence of a pointer is an implementation detail. (NB: indirect tagged objects are not yet implemented) 2. The dynamic type tag of a tagged object pointed to by a reflect.Value may be an interface type; it need not be concrete. This arises in code such as this: pts(eface) is a singleton containing an interface{}-tagged object. That tagged object's payload is an interface{} value, i.e. the pts of the payload contains only concrete-tagged objects, although in this example it's the zero interface{} value, so its pts is empty. reflect.Type: Just as in the real "reflect" library, we represent a reflect.Type as an interface whose sole implementation is the concrete type, *reflect.rtype. (This choice is forced on us by go/types: clients cannot fabricate types with arbitrary method sets.) rtype instances are canonical: there is at most one per dynamic type. (rtypes are in fact large structs but since identity is all that matters, we represent them by a single node.) The payload of each *rtype-tagged object is an *rtype pointer that points to exactly one such canonical rtype object. We exploit this by setting the node.typ of the payload to the dynamic type, not '*rtype'. This saves us an indirection in each resolution rule. As an optimisation, *rtype-tagged objects are canonicalized too. Aggregate types: Aggregate types are treated as if all directly contained aggregates are recursively flattened out. Structs: *ssa.Field y = x.f creates a simple edge to y from x's node at f's offset. *ssa.FieldAddr y = &x->f requires a dynamic closure rule to create The nodes of a struct consist of a special 'identity' node (whose type is that of the struct itself), followed by the nodes for all the struct's fields, recursively flattened out. A pointer to the struct is a pointer to its identity node. That node allows us to distinguish a pointer to a struct from a pointer to its first field. Field offsets are logical field offsets (plus one for the identity node), so the sizes of the fields can be ignored by the analysis. (The identity node is non-traditional but enables the distinction described above, which is valuable for code comprehension tools. Typical pointer analyses for C, whose purpose is compiler optimization, must soundly model unsafe.Pointer (void*) conversions, and this requires fidelity to the actual memory layout using physical field offsets.) *ssa.Field y = x.f creates a simple edge to y from x's node at f's offset. *ssa.FieldAddr y = &x->f requires a dynamic closure rule to create Arrays: We model an array by an identity node (whose type is that of the array itself) followed by a node representing all the elements of the array; the analysis does not distinguish elements with different indices. Effectively, an array is treated like struct{elem T}, a load y=x[i] like y=x.elem, and a store x[i]=y like x.elem=y; the index i is ignored. A pointer to an array is pointer to its identity node. (A slice is also a pointer to an array's identity node.) The identity node allows us to distinguish a pointer to an array from a pointer to one of its elements, but it is rather costly because it introduces more offset constraints into the system. Furthermore, sound treatment of unsafe.Pointer would require us to dispense with this node. Arrays may be allocated by Alloc, by make([]T), by calls to append, and via reflection. Tuples (T, ...): Tuples are treated like structs with naturally numbered fields. *ssa.Extract is analogous to *ssa.Field. However, tuples have no identity field since by construction, they cannot be address-taken. There are three kinds of function call: Cases 1 and 2 apply equally to methods and standalone functions. Static calls: A static call consists three steps: A static function call is little more than two struct value copies between the P/R blocks of caller and callee: Context sensitivity: Static calls (alone) may be treated context sensitively, i.e. each callsite may cause a distinct re-analysis of the callee, improving precision. Our current context-sensitivity policy treats all intrinsics and getter/setter methods in this manner since such functions are small and seem like an obvious source of spurious confluences, though this has not yet been evaluated. Dynamic function calls: Dynamic calls work in a similar manner except that the creation of copy edges occurs dynamically, in a similar fashion to a pair of struct copies in which the callee is indirect: (Recall that the function object's P- and R-blocks are contiguous.) Interface method invocation: For invoke-mode calls, we create a params/results block for the callsite and attach a dynamic closure rule to the interface. For each new tagged object that flows to the interface, we look up the concrete method, find its function object, and connect its P/R blocks to the callsite's P/R blocks, adding copy edges to the graph during solving. Recording call targets: The analysis notifies its clients of each callsite it encounters, passing a CallSite interface. Among other things, the CallSite contains a synthetic constraint variable ("targets") whose points-to solution includes the set of all function objects to which the call may dispatch. It is via this mechanism that the callgraph is made available. Clients may also elect to be notified of callgraph edges directly; internally this just iterates all "targets" variables' pts(·)s. We implement Hash-Value Numbering (HVN), a pre-solver constraint optimization described in Hardekopf & Lin, SAS'07. This is documented in more detail in hvn.go. We intend to add its cousins HR and HU in future. The solver is currently a naive Andersen-style implementation; it does not perform online cycle detection, though we plan to add solver optimisations such as Hybrid- and Lazy- Cycle Detection from (Hardekopf & Lin, PLDI'07). It uses difference propagation (Pearce et al, SQC'04) to avoid redundant re-triggering of closure rules for values already seen. Points-to sets are represented using sparse bit vectors (similar to those used in LLVM and gcc), which are more space- and time-efficient than sets based on Go's built-in map type or dense bit vectors. Nodes are permuted prior to solving so that object nodes (which may appear in points-to sets) are lower numbered than non-object (var) nodes. This improves the density of the set over which the PTSs range, and thus the efficiency of the representation. Partly thanks to avoiding map iteration, the execution of the solver is 100% deterministic, a great help during debugging. Andersen, L. O. 1994. Program analysis and specialization for the C programming language. Ph.D. dissertation. DIKU, University of Copenhagen. David J. Pearce, Paul H. J. Kelly, and Chris Hankin. 2004. Efficient field-sensitive pointer analysis for C. In Proceedings of the 5th ACM SIGPLAN-SIGSOFT workshop on Program analysis for software tools and engineering (PASTE '04). ACM, New York, NY, USA, 37-42. http://doi.acm.org/10.1145/996821.996835 David J. Pearce, Paul H. J. Kelly, and Chris Hankin. 2004. Online Cycle Detection and Difference Propagation: Applications to Pointer Analysis. Software Quality Control 12, 4 (December 2004), 311-337. http://dx.doi.org/10.1023/B:SQJO.0000039791.93071.a2 David Grove and Craig Chambers. 2001. A framework for call graph construction algorithms. ACM Trans. Program. Lang. Syst. 23, 6 (November 2001), 685-746. http://doi.acm.org/10.1145/506315.506316 Ben Hardekopf and Calvin Lin. 2007. The ant and the grasshopper: fast and accurate pointer analysis for millions of lines of code. In Proceedings of the 2007 ACM SIGPLAN conference on Programming language design and implementation (PLDI '07). ACM, New York, NY, USA, 290-299. http://doi.acm.org/10.1145/1250734.1250767 Ben Hardekopf and Calvin Lin. 2007. Exploiting pointer and location equivalence to optimize pointer analysis. In Proceedings of the 14th international conference on Static Analysis (SAS'07), Hanne Riis Nielson and Gilberto Filé (Eds.). Springer-Verlag, Berlin, Heidelberg, 265-280. Atanas Rountev and Satish Chandra. 2000. Off-line variable substitution for scaling points-to analysis. In Proceedings of the ACM SIGPLAN 2000 conference on Programming language design and implementation (PLDI '00). ACM, New York, NY, USA, 47-56. DOI=10.1145/349299.349310 http://doi.acm.org/10.1145/349299.349310 This program demonstrates how to use the pointer analysis to obtain a conservative call-graph of a Go program. It also shows how to compute the points-to set of a variable, in this case, (C).f's ch parameter.
Package codestar provides the API client, operations, and parameter types for AWS CodeStar. This is the API reference for AWS CodeStar. This reference provides descriptions of the operations and data types for the AWS CodeStar API along with usage examples. You can use the AWS CodeStar API to work with: Projects and their resources, by calling the following: DeleteProject , which deletes a project. DescribeProject , which lists the attributes of a project. ListProjects , which lists all projects associated with your AWS account. ListResources , which lists the resources associated with a project. ListTagsForProject , which lists the tags associated with a project. TagProject , which adds tags to a project. UntagProject , which removes tags from a project. UpdateProject , which updates the attributes of a project. Teams and team members, by calling the following: AssociateTeamMember , which adds an IAM user to the team for a project. DisassociateTeamMember , which removes an IAM user from the team for a project. ListTeamMembers , which lists all the IAM users in the team for a project, including their roles and attributes. UpdateTeamMember , which updates a team member's attributes in a project. Users, by calling the following: CreateUserProfile , which creates a user profile that contains data associated with the user across all projects. DeleteUserProfile , which deletes all user profile information across all projects. DescribeUserProfile , which describes the profile of a user. ListUserProfiles , which lists all user profiles. UpdateUserProfile , which updates the profile for a user.
Package validator implements value validations for structs and individual fields based on tags. It can also handle Cross-Field and Cross-Struct validation for nested structs and has the ability to dive into arrays and maps of any type. see more examples https://github.com/go-playground/validator/tree/v9/_examples Doing things this way is actually the way the standard library does, see the file.Open method here: The authors return type "error" to avoid the issue discussed in the following, where err is always != nil: Validator only InvalidValidationError for bad validation input, nil or ValidationErrors as type error; so, in your code all you need to do is check if the error returned is not nil, and if it's not check if error is InvalidValidationError ( if necessary, most of the time it isn't ) type cast it to type ValidationErrors like so err.(validator.ValidationErrors). Custom Validation functions can be added. Example: Cross-Field Validation can be done via the following tags: If, however, some custom cross-field validation is required, it can be done using a custom validation. Why not just have cross-fields validation tags (i.e. only eqcsfield and not eqfield)? The reason is efficiency. If you want to check a field within the same struct "eqfield" only has to find the field on the same struct (1 level). But, if we used "eqcsfield" it could be multiple levels down. Example: Multiple validators on a field will process in the order defined. Example: Bad Validator definitions are not handled by the library. Example: Baked In Cross-Field validation only compares fields on the same struct. If Cross-Field + Cross-Struct validation is needed you should implement your own custom validator. Comma (",") is the default separator of validation tags. If you wish to have a comma included within the parameter (i.e. excludesall=,) you will need to use the UTF-8 hex representation 0x2C, which is replaced in the code as a comma, so the above will become excludesall=0x2C. Pipe ("|") is the 'or' validation tags deparator. If you wish to have a pipe included within the parameter i.e. excludesall=| you will need to use the UTF-8 hex representation 0x7C, which is replaced in the code as a pipe, so the above will become excludesall=0x7C Here is a list of the current built in validators: Tells the validation to skip this struct field; this is particularly handy in ignoring embedded structs from being validated. (Usage: -) This is the 'or' operator allowing multiple validators to be used and accepted. (Usage: rbg|rgba) <-- this would allow either rgb or rgba colors to be accepted. This can also be combined with 'and' for example ( Usage: omitempty,rgb|rgba) When a field that is a nested struct is encountered, and contains this flag any validation on the nested struct will be run, but none of the nested struct fields will be validated. This is useful if inside of your program you know the struct will be valid, but need to verify it has been assigned. NOTE: only "required" and "omitempty" can be used on a struct itself. Same as structonly tag except that any struct level validations will not run. Allows conditional validation, for example if a field is not set with a value (Determined by the "required" validator) then other validation such as min or max won't run, but if a value is set validation will run. This tells the validator to dive into a slice, array or map and validate that level of the slice, array or map with the validation tags that follow. Multidimensional nesting is also supported, each level you wish to dive will require another dive tag. dive has some sub-tags, 'keys' & 'endkeys', please see the Keys & EndKeys section just below. Example #1 Example #2 Keys & EndKeys These are to be used together directly after the dive tag and tells the validator that anything between 'keys' and 'endkeys' applies to the keys of a map and not the values; think of it like the 'dive' tag, but for map keys instead of values. Multidimensional nesting is also supported, each level you wish to validate will require another 'keys' and 'endkeys' tag. These tags are only valid for maps. Example #1 Example #2 This validates that the value is not the data types default zero value. For numbers ensures value is not zero. For strings ensures value is not "". For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. The field under validation must be present and not empty only if any of the other specified fields are present. For strings ensures value is not "". For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. Examples: The field under validation must be present and not empty only if all of the other specified fields are present. For strings ensures value is not "". For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. Example: The field under validation must be present and not empty only when any of the other specified fields are not present. For strings ensures value is not "". For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. Examples: The field under validation must be present and not empty only when all of the other specified fields are not present. For strings ensures value is not "". For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. Example: This validates that the value is the default value and is almost the opposite of required. For numbers, length will ensure that the value is equal to the parameter given. For strings, it checks that the string length is exactly that number of characters. For slices, arrays, and maps, validates the number of items. For numbers, max will ensure that the value is less than or equal to the parameter given. For strings, it checks that the string length is at most that number of characters. For slices, arrays, and maps, validates the number of items. For numbers, min will ensure that the value is greater or equal to the parameter given. For strings, it checks that the string length is at least that number of characters. For slices, arrays, and maps, validates the number of items. For strings & numbers, eq will ensure that the value is equal to the parameter given. For slices, arrays, and maps, validates the number of items. For strings & numbers, ne will ensure that the value is not equal to the parameter given. For slices, arrays, and maps, validates the number of items. For strings, ints, and uints, oneof will ensure that the value is one of the values in the parameter. The parameter should be a list of values separated by whitespace. Values may be strings or numbers. For numbers, this will ensure that the value is greater than the parameter given. For strings, it checks that the string length is greater than that number of characters. For slices, arrays and maps it validates the number of items. Example #1 Example #2 (time.Time) For time.Time ensures the time value is greater than time.Now.UTC(). Same as 'min' above. Kept both to make terminology with 'len' easier. Example #1 Example #2 (time.Time) For time.Time ensures the time value is greater than or equal to time.Now.UTC(). For numbers, this will ensure that the value is less than the parameter given. For strings, it checks that the string length is less than that number of characters. For slices, arrays, and maps it validates the number of items. Example #1 Example #2 (time.Time) For time.Time ensures the time value is less than time.Now.UTC(). Same as 'max' above. Kept both to make terminology with 'len' easier. Example #1 Example #2 (time.Time) For time.Time ensures the time value is less than or equal to time.Now.UTC(). This will validate the field value against another fields value either within a struct or passed in field. Example #1: Example #2: Field Equals Another Field (relative) This does the same as eqfield except that it validates the field provided relative to the top level struct. This will validate the field value against another fields value either within a struct or passed in field. Examples: Field Does Not Equal Another Field (relative) This does the same as nefield except that it validates the field provided relative to the top level struct. Only valid for Numbers and time.Time types, this will validate the field value against another fields value either within a struct or passed in field. usage examples are for validation of a Start and End date: Example #1: Example #2: This does the same as gtfield except that it validates the field provided relative to the top level struct. Only valid for Numbers and time.Time types, this will validate the field value against another fields value either within a struct or passed in field. usage examples are for validation of a Start and End date: Example #1: Example #2: This does the same as gtefield except that it validates the field provided relative to the top level struct. Only valid for Numbers and time.Time types, this will validate the field value against another fields value either within a struct or passed in field. usage examples are for validation of a Start and End date: Example #1: Example #2: This does the same as ltfield except that it validates the field provided relative to the top level struct. Only valid for Numbers and time.Time types, this will validate the field value against another fields value either within a struct or passed in field. usage examples are for validation of a Start and End date: Example #1: Example #2: This does the same as ltefield except that it validates the field provided relative to the top level struct. This does the same as contains except for struct fields. It should only be used with string types. See the behavior of reflect.Value.String() for behavior on other types. This does the same as excludes except for struct fields. It should only be used with string types. See the behavior of reflect.Value.String() for behavior on other types. For arrays & slices, unique will ensure that there are no duplicates. For maps, unique will ensure that there are no duplicate values. For slices of struct, unique will ensure that there are no duplicate values in a field of the struct specified via a parameter. This validates that a string value contains ASCII alpha characters only This validates that a string value contains ASCII alphanumeric characters only This validates that a string value contains unicode alpha characters only This validates that a string value contains unicode alphanumeric characters only This validates that a string value contains a basic numeric value. basic excludes exponents etc... for integers or float it returns true. This validates that a string value contains a valid hexadecimal. This validates that a string value contains a valid hex color including hashtag (#) This validates that a string value contains a valid rgb color This validates that a string value contains a valid rgba color This validates that a string value contains a valid hsl color This validates that a string value contains a valid hsla color This validates that a string value contains a valid email This may not conform to all possibilities of any rfc standard, but neither does any email provider accept all possibilities. This validates that a string value contains a valid file path and that the file exists on the machine. This is done using os.Stat, which is a platform independent function. This validates that a string value contains a valid url This will accept any url the golang request uri accepts but must contain a schema for example http:// or rtmp:// This validates that a string value contains a valid uri This will accept any uri the golang request uri accepts This validataes that a string value contains a valid URN according to the RFC 2141 spec. This validates that a string value contains a valid base64 value. Although an empty string is valid base64 this will report an empty string as an error, if you wish to accept an empty string as valid you can use this with the omitempty tag. This validates that a string value contains a valid base64 URL safe value according the the RFC4648 spec. Although an empty string is a valid base64 URL safe value, this will report an empty string as an error, if you wish to accept an empty string as valid you can use this with the omitempty tag. This validates that a string value contains a valid bitcoin address. The format of the string is checked to ensure it matches one of the three formats P2PKH, P2SH and performs checksum validation. Bitcoin Bech32 Address (segwit) This validates that a string value contains a valid bitcoin Bech32 address as defined by bip-0173 (https://github.com/bitcoin/bips/blob/master/bip-0173.mediawiki) Special thanks to Pieter Wuille for providng reference implementations. This validates that a string value contains a valid ethereum address. The format of the string is checked to ensure it matches the standard Ethereum address format Full validation is blocked by https://github.com/golang/crypto/pull/28 This validates that a string value contains the substring value. This validates that a string value contains any Unicode code points in the substring value. This validates that a string value contains the supplied rune value. This validates that a string value does not contain the substring value. This validates that a string value does not contain any Unicode code points in the substring value. This validates that a string value does not contain the supplied rune value. This validates that a string value starts with the supplied string value This validates that a string value ends with the supplied string value This validates that a string value contains a valid isbn10 or isbn13 value. This validates that a string value contains a valid isbn10 value. This validates that a string value contains a valid isbn13 value. This validates that a string value contains a valid UUID. Uppercase UUID values will not pass - use `uuid_rfc4122` instead. This validates that a string value contains a valid version 3 UUID. Uppercase UUID values will not pass - use `uuid3_rfc4122` instead. This validates that a string value contains a valid version 4 UUID. Uppercase UUID values will not pass - use `uuid4_rfc4122` instead. This validates that a string value contains a valid version 5 UUID. Uppercase UUID values will not pass - use `uuid5_rfc4122` instead. This validates that a string value contains only ASCII characters. NOTE: if the string is blank, this validates as true. This validates that a string value contains only printable ASCII characters. NOTE: if the string is blank, this validates as true. This validates that a string value contains one or more multibyte characters. NOTE: if the string is blank, this validates as true. This validates that a string value contains a valid DataURI. NOTE: this will also validate that the data portion is valid base64 This validates that a string value contains a valid latitude. This validates that a string value contains a valid longitude. This validates that a string value contains a valid U.S. Social Security Number. This validates that a string value contains a valid IP Address. This validates that a string value contains a valid v4 IP Address. This validates that a string value contains a valid v6 IP Address. This validates that a string value contains a valid CIDR Address. This validates that a string value contains a valid v4 CIDR Address. This validates that a string value contains a valid v6 CIDR Address. This validates that a string value contains a valid resolvable TCP Address. This validates that a string value contains a valid resolvable v4 TCP Address. This validates that a string value contains a valid resolvable v6 TCP Address. This validates that a string value contains a valid resolvable UDP Address. This validates that a string value contains a valid resolvable v4 UDP Address. This validates that a string value contains a valid resolvable v6 UDP Address. This validates that a string value contains a valid resolvable IP Address. This validates that a string value contains a valid resolvable v4 IP Address. This validates that a string value contains a valid resolvable v6 IP Address. This validates that a string value contains a valid Unix Address. This validates that a string value contains a valid MAC Address. Note: See Go's ParseMAC for accepted formats and types: This validates that a string value is a valid Hostname according to RFC 952 https://tools.ietf.org/html/rfc952 This validates that a string value is a valid Hostname according to RFC 1123 https://tools.ietf.org/html/rfc1123 Full Qualified Domain Name (FQDN) This validates that a string value contains a valid FQDN. This validates that a string value appears to be an HTML element tag including those described at https://developer.mozilla.org/en-US/docs/Web/HTML/Element This validates that a string value is a proper character reference in decimal or hexadecimal format This validates that a string value is percent-encoded (URL encoded) according to https://tools.ietf.org/html/rfc3986#section-2.1 This validates that a string value contains a valid directory and that it exists on the machine. This is done using os.Stat, which is a platform independent function. NOTE: When returning an error, the tag returned in "FieldError" will be the alias tag unless the dive tag is part of the alias. Everything after the dive tag is not reported as the alias tag. Also, the "ActualTag" in the before case will be the actual tag within the alias that failed. Here is a list of the current built in alias tags: Validator notes: A collection of validation rules that are frequently needed but are more complex than the ones found in the baked in validators. A non standard validator must be registered manually like you would with your own custom validation functions. Example of registration and use: Here is a list of the current non standard validators: This package panics when bad input is provided, this is by design, bad code like that should not make it to production.
Package restruct implements packing and unpacking of raw binary formats. Structures can be created with struct tags annotating the on-disk or in-memory layout of the structure, using the "struct" struct tag, like so: To unpack data in memory to this structure, simply use Unpack with a byte slice:
Package statsd is a simple and efficient StatsD client. Use options to configure the Client: target host/port, sampling rate, tags, etc. Whenever you want to use different options (e.g. other tags, different sampling rate), you should use the Clone() method of the Client. Because when cloning a Client, the same connection is reused so this is way cheaper and more efficient than creating another Client using New(). Client's methods buffer metrics. The buffer is flushed when either: The background goroutine can be disabled using the FlushPeriod(0) option. Buffering can be disabled using the MaxPacketSize(0) option. StatsD homepage: https://github.com/etsy/statsd
Package kivik provides a generic interface to CouchDB or CouchDB-like databases. The kivik package must be used in conjunction with a database driver. The officially supported drivers are: The Filesystem and Memory drivers are also available, but in early stages of development, and so many features do not yet work: The kivik driver system is modeled after the standard library's `sql` and `sql/driver` packages, although the client API is completely different due to the different database models implemented by SQL and NoSQL databases such as CouchDB. couchDB stores JSON, so Kivik translates Go data structures to and from JSON as necessary. The conversion between Go data types and JSON, and vice versa, is handled automatically according to the rules and behavior described in the documentationf or the standard library's `encoding/json` package (https://golang.org/pkg/encoding/json). One would be well-advised to become familiar with using `json` struct field tags (https://golang.org/pkg/encoding/json/#Marshal) when working with JSON documents. Most Kivik methods take `context.Context` as their first argument. This allows the cancellation of blocking operations in the case that the result is no longer needed. A typical use case for a web application would be to cancel a Kivik request if the remote HTTP client ahs disconnected, rednering the results of the query irrelevant. To learn more about Go's contexts, read the `context` package documentation (https://golang.org/pkg/context/) and read the Go blog post "Go Concurrency Patterns: Context" (https://blog.golang.org/context) for example code. If in doubt, you can pass `context.TODO()` as the context variable. Example: Kivik returns errors that embed an HTTP status code. In most cases, this is the HTTP status code returned by the server. The embedded HTTP status code may be accessed easily using the StatusCode() method, or with a type assertion to `interface { StatusCode() int }`. Example: Any error that does not conform to this interface will be assumed to represent a http.StatusInternalServerError status code. For common usage, authentication should be as simple as including the authentication credentials in the connection DSN. For example: This will connect to `localhost` on port 5984, using the username `admin` and the password `abc123`. When connecting to CouchDB (as in the above example), this will use cookie auth (https://docs.couchdb.org/en/stable/api/server/authn.html?highlight=cookie%20auth#cookie-authentication). Depending on which driver you use, there may be other ways to authenticate, as well. At the moment, the CouchDB driver is the only official driver which offers additional authentication methods. Please refer to the CouchDB package documentation for details (https://pkg.go.dev/github.com/go-kivik/couchdb/v3). With a client handle in hand, you can create a database handle with the DB() method to interact with a specific database.
Package envdecode is a package for populating structs from environment variables, using struct tags.
This library allow to define a default value to any struct, this is made thanks to struct tags.
Package tagexpr is an interesting go struct tag expression syntax for field validation, etc. Copyright 2019 Bytedance Inc. All Rights Reserved. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
This is the official Go SDK for Oracle Cloud Infrastructure Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#installing for installation instructions. Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring for configuration instructions. The following example shows how to get started with the SDK. The example belows creates an identityClient struct with the default configuration. It then utilizes the identityClient to list availability domains and prints them out to stdout More examples can be found in the SDK Github repo: https://github.com/oracle/oci-go-sdk/tree/master/example Optional fields are represented with the `mandatory:"false"` tag on input structs. The SDK will omit all optional fields that are nil when making requests. In the case of enum-type fields, the SDK will omit fields whose value is an empty string. The SDK uses pointers for primitive types in many input structs. To aid in the construction of such structs, the SDK provides functions that return a pointer for a given value. For example: The SDK exposes functionality that allows the user to customize any http request before is sent to the service. You can do so by setting the `Interceptor` field in any of the `Client` structs. For example: The Interceptor closure gets called before the signing process, thus any changes done to the request will be properly signed and submitted to the service. The SDK exposes a stand-alone signer that can be used to signing custom requests. Related code can be found here: https://github.com/oracle/oci-go-sdk/blob/master/common/http_signer.go. The example below shows how to create a default signer. The signer also allows more granular control on the headers used for signing. For example: You can combine a custom signer with the exposed clients in the SDK. This allows you to add custom signed headers to the request. Following is an example: Bear in mind that some services have a white list of headers that it expects to be signed. Therefore, adding an arbitrary header can result in authentications errors. To see a runnable example, see https://github.com/oracle/oci-go-sdk/blob/master/example/example_identity_test.go For more information on the signing algorithm refer to: https://docs.cloud.oracle.com/Content/API/Concepts/signingrequests.htm Some operations accept or return polymorphic JSON objects. The SDK models such objects as interfaces. Further the SDK provides structs that implement such interfaces. Thus, for all operations that expect interfaces as input, pass the struct in the SDK that satisfies such interface. For example: In the case of a polymorphic response you can type assert the interface to the expected type. For example: An example of polymorphic JSON request handling can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_test.go#L63 When calling a list operation, the operation will retrieve a page of results. To retrieve more data, call the list operation again, passing in the value of the most recent response's OpcNextPage as the value of Page in the next list operation call. When there is no more data the OpcNextPage field will be nil. An example of pagination using this logic can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_pagination_test.go The SDK has a built-in logging mechanism used internally. The internal logging logic is used to record the raw http requests, responses and potential errors when (un)marshalling request and responses. Built-in logging in the SDK is controlled via the environment variable "OCI_GO_SDK_DEBUG" and its contents. The below are possible values for the "OCI_GO_SDK_DEBUG" variable 1. "info" or "i" enables all info logging messages 2. "debug" or "d" enables all debug and info logging messages 3. "verbose" or "v" or "1" enables all verbose, debug and info logging messages 4. "null" turns all logging messages off. If the value of the environment variable does not match any of the above then default logging level is "info". If the environment variable is not present then no logging messages are emitted. The default destination for logging is Stderr and if you want to output log to a file you can set via environment variable "OCI_GO_SDK_LOG_OUTPUT_MODE". The below are possible values 1. "file" or "f" enables all logging output saved to file 2. "combine" or "c" enables all logging output to both stderr and file You can also customize the log file location and name via "OCI_GO_SDK_LOG_FILE" environment variable, the value should be the path to a specific file If this environment variable is not present, the default location will be the project root path Sometimes you may need to wait until an attribute of a resource, such as an instance or a VCN, reaches a certain state. An example of this would be launching an instance and then waiting for the instance to become available, or waiting until a subnet in a VCN has been terminated. You might also want to retry the same operation again if there's network issue etc... This can be accomplished by using the RequestMetadata.RetryPolicy. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_retry_test.go The GO SDK uses the net/http package to make calls to OCI services. If your environment requires you to use a proxy server for outgoing HTTP requests then you can set this up in the following ways: 1. Configuring environment variable as described here https://golang.org/pkg/net/http/#ProxyFromEnvironment 2. Modifying the underlying Transport struct for a service client In order to modify the underlying Transport struct in HttpClient, you can do something similar to (sample code for audit service client): The Object Storage service supports multipart uploads to make large object uploads easier by splitting the large object into parts. The Go SDK supports raw multipart upload operations for advanced use cases, as well as a higher level upload class that uses the multipart upload APIs. For links to the APIs used for multipart upload operations, see Managing Multipart Uploads (https://docs.cloud.oracle.com/iaas/Content/Object/Tasks/usingmultipartuploads.htm). Higher level multipart uploads are implemented using the UploadManager, which will: split a large object into parts for you, upload the parts in parallel, and then recombine and commit the parts as a single object in storage. This code sample shows how to use the UploadManager to automatically split an object into parts for upload to simplify interaction with the Object Storage service: https://github.com/oracle/oci-go-sdk/blob/master/example/example_objectstorage_test.go Some response fields are enum-typed. In the future, individual services may return values not covered by existing enums for that field. To address this possibility, every enum-type response field is a modeled as a type that supports any string. Thus if a service returns a value that is not recognized by your version of the SDK, then the response field will be set to this value. When individual services return a polymorphic JSON response not available as a concrete struct, the SDK will return an implementation that only satisfies the interface modeling the polymorphic JSON response. If you are using a version of the SDK released prior to the announcement of a new region, you may need to use a workaround to reach it, depending on whether the region is in the oraclecloud.com realm. A region is a localized geographic area. For more information on regions and how to identify them, see Regions and Availability Domains(https://docs.cloud.oracle.com/iaas/Content/General/Concepts/regions.htm). A realm is a set of regions that share entities. You can identify your realm by looking at the domain name at the end of the network address. For example, the realm for xyz.abc.123.oraclecloud.com is oraclecloud.com. oraclecloud.com Realm: For regions in the oraclecloud.com realm, even if common.Region does not contain the new region, the forward compatibility of the SDK can automatically handle it. You can pass new region names just as you would pass ones that are already defined. For more information on passing region names in the configuration, see Configuring (https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring). For details on common.Region, see (https://github.com/oracle/oci-go-sdk/blob/master/common/common.go). Other Realms: For regions in realms other than oraclecloud.com, you can use the following workarounds to reach new regions with earlier versions of the SDK. NOTE: Be sure to supply the appropriate endpoints for your region. You can overwrite the target host with client.Host: If you are authenticating via instance principals, you can set the authentication endpoint in an environment variable: Got a fix for a bug, or a new feature you'd like to contribute? The SDK is open source and accepting pull requests on GitHub https://github.com/oracle/oci-go-sdk Licensing information available at: https://github.com/oracle/oci-go-sdk/blob/master/LICENSE.txt To be notified when a new version of the Go SDK is released, subscribe to the following feed: https://github.com/oracle/oci-go-sdk/releases.atom Please refer to this link: https://github.com/oracle/oci-go-sdk#help
Package conf provides support for using environmental variables and command line arguments for configuration. It is compatible with the GNU extensions to the POSIX recommendations for command-line options. See http://www.gnu.org/software/libc/manual/html_node/Argument-Syntax.html There are no hard bindings for this package. This package takes a struct value and parses it for both the environment and flags. It supports several tags to customize the flag options. The field name and any parent struct name will be used for the long form of the command name unless the name is overridden. As an example, this config struct: Would produce the following usage output: Usage: conf.test [options] [arguments] OPTIONS The API is a single call to Parse Additionally, if the config struct has a field of the slice type conf.Args then it will be populated with any remaining arguments from the command line after flags have been processed. For example a program with a config struct like this: If that program is executed from the command line like this: Then the cfg.Args field will contain the string values ["serve", "http"]. The Args type has a method Num for convenient access to these arguments such as this: You can add a version with a description by adding the Version type to your config type Then you can set these values at run time for display.
Package codestarconnections provides the API client, operations, and parameter types for AWS CodeStar connections. This Amazon Web Services CodeStar Connections API Reference provides descriptions and usage examples of the operations and data types for the Amazon Web Services CodeStar Connections API. You can use the connections API to work with connections and installations. Connections are configurations that you use to connect Amazon Web Services resources to external code repositories. Each connection is a resource that can be given to services such as CodePipeline to connect to a third-party repository such as Bitbucket. For example, you can add the connection in CodePipeline so that it triggers your pipeline when a code change is made to your third-party code repository. Each connection is named and associated with a unique ARN that is used to reference the connection. When you create a connection, the console initiates a third-party connection handshake. Installations are the apps that are used to conduct this handshake. For example, the installation for the Bitbucket provider type is the Bitbucket app. When you create a connection, you can choose an existing installation or create one. When you want to create a connection to an installed provider type such as GitHub Enterprise Server, you create a host for your connections. You can work with connections by calling: CreateConnection DeleteConnection GetConnection ListConnections You can work with hosts by calling: CreateHost DeleteHost GetHost ListHosts You can work with tags in Amazon Web Services CodeStar Connections by calling the following: ListTagsForResource TagResource UntagResource For information about how to use Amazon Web Services CodeStar Connections, see the Developer Tools User Guide.
package goptions implements a flexible parser for command line options. Key targets were the support for both long and short flag versions, mutually exclusive flags, and verbs. Flags and their corresponding variables are defined by the tags in a (possibly anonymous) struct. Short flags can be combined (e.g. `-nfv`). Long flags take their value after a separating space. The equals notation (`--long-flag=value`) is NOT supported right now. Every member of the struct which is supposed to catch a command line value has to have a "goptions" tag. The contains the short and long flag names for this member but can additionally specify any of these options below. Depending on the type of the struct member, additional options might become available: If a member is a slice type, multiple definitions of the flags are possible. For each specification the underlying type will be used. goptions also has support for verbs. Each verb accepts its own set of flags which take exactly the same tag format as global options. For an usage example of verbs see the PrintHelp() example.
You can also add your own generator function to your own defined tags. Single fake function can be used for retrieving particular values. You can set length for your random strings also set boundary for your integers. You can set the size for your random slices. You also can use faker to generate your structs data randomly without any tag. And it will fill the data based on its data-type.
Package datadog-api-client-go. This repository contains a Go API client for the Datadog API (https://docs.datadoghq.com/api/). • Go 1.19+ This repository contains per-major-version API client packages. Right now, Datadog has two API versions, v1, v2 and the common package. The client library for Datadog API v1 is located in the api/datadogV1 directory. Import it with The client library for Datadog API v2 is located in the api/datadogV2 directory. Import it with The datadog package for Datadog API is located in the api/datadog directory. Import it with Here's an example creating a user: Save it to example.go, then run go get github.com/DataDog/datadog-api-client-go/v2. Set the DD_CLIENT_API_KEY and DD_CLIENT_APP_KEY to your Datadog credentials, and then run go run example.go. This client includes access to Datadog API endpoints while they are in an unstable state and may undergo breaking changes. An extra configuration step is required to enable these endpoints: where <OperationName> is the name of the method used to interact with that endpoint. For example: GetLogsIndex, or UpdateLogsIndex When talking to a different server, like the eu instance, change the ContextServerVariables: If you want to disable GZIP compressed responses, set the compress flag on your configuration object: If you want to enable requests logging, set the debug flag on your configuration object: If you want to enable retry when getting status code 429 rate-limited, set EnableRetry to true The default max retry is 3, you can change it with MaxRetries If you want to configure proxy, set env var HTTP_PROXY, and HTTPS_PROXY or set custom HTTPClient with proxy configured on configuration object: Several listing operations have a pagination method to help consume all the items available. For example, to retrieve all your incidents: Encoder/Decoder By default, datadog-api-client-go uses the Go standard library enconding/json (https://pkg.go.dev/encoding/json) to encode and decode data. As an alternative users can opt in to use goccy/go-json (https://github.com/goccy/go-json) by specifying the go build tag goccy_gojson. In comparison, there was a significant decrease in cpu time with goccy/go-json with an increase in memory overhead. For further benchmark information, see goccy/go-json benchmark (https://github.com/goccy/go-json#benchmarks) section. Developer documentation for API endpoints and models is available on Github pages (https://datadoghq.dev/datadog-api-client-go/pkg/github.com/DataDog/datadog-api-client-go/v2/). Released versions are available on pkg.go.dev (https://pkg.go.dev/github.com/DataDog/datadog-api-client-go/v2). As most of the code in this repository is generated, we will only accept PRs for files that are not modified by our code-generation machinery (changes to the generated files would get overwritten). We happily accept contributions to files that are not autogenerated, such as tests and development tooling. support@datadoghq.com
Package codestarnotifications provides the API client, operations, and parameter types for AWS CodeStar Notifications. This AWS CodeStar Notifications API Reference provides descriptions and usage examples of the operations and data types for the AWS CodeStar Notifications API. You can use the AWS CodeStar Notifications API to work with the following objects: Notification rules, by calling the following: CreateNotificationRule DeleteNotificationRule DescribeNotificationRule ListNotificationRules UpdateNotificationRule Subscribe Unsubscribe Targets, by calling the following: DeleteTarget ListTargets Events, by calling the following: ListEventTypes Tags, by calling the following: ListTagsForResource TagResource UntagResource For information about how to use AWS CodeStar Notifications, see the Amazon Web Services Developer Tools Console User Guide.
Package aconfig provides simple but still powerful config loader. It can read configuration from different sources, like defaults, files, environment variables, console flag parameters. Defaults are defined in structure tags (`default` tag). For files JSON, YAML, TOML and .Env are supported. Environment variables and flag parameters can have an optional prefix to separate them from other entries. Also, aconfig is dependency-free, file decoders are used as separate modules (submodules to be exact) and are added to your go.mod only when used. Loader configuration (`Config` type) has different ways to configure loader, to skip some sources, define prefixes, fail on unknown params. Just load defaults from struct definition. Load defaults from struct definition and overwrite with a file. And then overwrite with environment variables. Load defaults from struct defunition and overwrite with a file. Load defaults from struct definition and overwrite with a file. And then overwrite with environment variables. Finally read command line flags.
Package fig loads configuration files and/or environment variables into Go structs with extra juice for validating fields and setting defaults. Config files may be defined in yaml, json or toml format. When you call `Load()`, fig takes the following steps: Define your configuration file in the root of your project: Define your struct and load it: Pass options as additional parameters to `Load()` to configure fig's behaviour. Do not look for any configuration file with `IgnoreFile()`. If IgnoreFile is given then any other configuration file related options like `File` and `Dirs` are simply ignored. File & Dirs By default fig searches for a file named `config.yaml` in the directory it is run from. Change the file and directories fig searches in with `File()` and `Dirs()`. Fig searches for the file in dirs sequentially and uses the first matching file. The decoder (yaml/json/toml) used is picked based on the file's extension. The struct tag key tag fig looks for to find the field's alt name can be changed using `Tag()`. By default fig uses the tag key `fig`. Fig can be configured to additionally set fields using the environment. This behaviour can be enabled using the option `UseEnv(prefix)`. If loading from file is also enabled then first the struct is loaded from a config file and thus any values found in the environment will overwrite existing values in the struct. Prefix is a string that will be prepended to the keys that are searched in the environment. Although discouraged, prefix may be left empty. Fig searches for keys in the form PREFIX_FIELD_PATH, or if prefix is left empty then FIELD_PATH. A field's path is formed by prepending its name with the names of all the surrounding structs up to the root struct, upper-cased and separated by an underscore. If a field has an alt name defined in its struct tag then that name is preferred over its struct name. With the struct above and `UseEnv("myapp")` fig would search for the following environment variables: Fields contained in struct slices whose elements already exists can be also be set via the environment in the form PARENT_IDX_FIELD, where idx is the index of the field in the slice. With the config above individual servers may be configured with the following environment variable: Note: the Server slice must already have members inside it (i.e. from loading of the configuration file) for the containing fields to be altered via the environment. Fig will not instantiate and insert elements into the slice. Maps and map values cannot be populated from the environment. Change the layout fig uses to parse times using `TimeLayout()`. By default fig parses time using the `RFC.3339` layout (`2006-01-02T15:04:05Z07:00`). By default fig ignores any fields in the config file that are not present in the struct. This behaviour can be changed using `UseStrict()` to achieve strict parsing. When strict parsing is enabled, extra fields in the config file will cause an error. A validate key with a required value in the field's struct tag makes fig check if the field has been set after it's been loaded. Required fields that are not set are returned as an error. Fig uses the following properties to check if a field is set: See example below to help understand: A default key in the field tag makes fig fill the field with the value specified when the field is not otherwise set. Fig attempts to parse the value based on the field's type. If parsing fails then an error is returned. A default value can be set for the following types: Successive elements of slice defaults should be separated by a comma. The entire slice can optionally be enclosed in square brackets: Boolean values: Fig cannot distinguish between false and an unset value for boolean types. As a result, default values for booleans are not currently supported. Maps: Maps are not supported because providing a map in a string form would be complex and error-prone. Users are encouraged to use structs instead for more reliable and structured data handling. Map values: Values retrieved from a map through reflection are not addressable. Therefore, setting default values for map values is not currently supported. The required validation and the default field tags are mutually exclusive as they are contradictory. This is not allowed: A wrapped error `ErrFileNotFound` is returned when fig is not able to find a config file to load. This can be useful for instance to fallback to a different configuration loading mechanism.
Package gomarkdoc formats documentation for one or more packages as markdown for usage outside of the main https://pkg.go.dev site. It supports custom templates for tweaking representation of documentation at fine-grained levels, exporting both exported and unexported symbols, and custom formatters for different backends. If you want to use this package as a command-line tool, you can install the command by running the following on go 1.16+: For older versions of go, you can install using the following method instead: The command line tool supports configuration for all of the features of the importable package: The gomarkdoc command processes each of the provided packages, generating documentation for the package in markdown format and writing it to console. For example, if you have a package in your current directory and want to send it to a documentation markdown file, you might do something like this: The gomarkdoc tool supports generating documentation for both local packages and remote ones. To specify a local package, start the name of the package with a period (.) or specify an absolute path on the filesystem. All other package signifiers are assumed to be remote packages. You may specify both local and remote packages in the same command invocation as separate arguments. If you have a project with many packages but you want to skip documentation generation for some, you can use the --exclude-dirs option. This will remove any matching directories from the list of directories to process. Excluded directories are specified using the same pathing syntax as the packages to process. Multiple expressions may be comma-separated or specified by using the --exclude-dirs flag multiple times. For example, in this repository we generate documentation for the entire project while excluding our test packages by running: By default, the documentation generated by the gomarkdoc command is sent to standard output, where it can be redirected to a file. This can be useful if you want to perform additional modifications to the documentation or send it somewhere other than a file. However, keep in mind that there are some inconsistencies in how various shells/platforms handle redirected command output (for example, Powershell encodes in UTF-16, not UTF-8). As a result, the --output option described below is recommended for most use cases. If you want to redirect output for each processed package to a file, you can provide the --output/-o option, which accepts a template specifying how to generate the path of the output file. A common usage of this option is when generating README documentation for a package with subpackages (which are supported via the ... signifier as in other parts of the golang toolchain). In addition, this option provides consistent behavior across platforms and shells: You can see all of the data available to the output template in the PackageSpec struct in the github.com/princjef/gomarkdoc/cmd/gomarkdoc package. The documentation information that is output is formatted using a series of text templates for the various components of the overall documentation which get generated. Higher level templates contain lower level templates, but any template may be replaced with an override template using the --template/-t option. The full list of templates that may be overridden are: file: generates documentation for a file containing one or more packages, depending on how the tool is configured. This is the root template for documentation generation. package: generates documentation for an entire package. type: generates documentation for a single type declaration, as well as any related functions/methods. func: generates documentation for a single function or method. It may be referenced from within a type, or directly in the package, depending on nesting. value: generates documentation for a single variable or constant declaration block within a package. index: generates an index of symbols within a package, similar to what is seen for godoc.org. The index links to types, funcs, variables, and constants generated by other templates, so it may need to be overridden as well if any of those templates are changed in a material way. example: generates documentation for a single example for a package or one of its symbols. The example is generated alongside whichever symbol it represents, based on the standard naming conventions outlined in https://blog.golang.org/examples#TOC_4. doc: generates the freeform documentation block for any of the above structures that can contain a documentation section. import: generates the import code used to pull in a package. Overriding with the --template-file option uses a key-value pair mapping a template name to the file containing the contents of the override template to use. Specified template files must exist: As with the godoc tool itself, only exported symbols will be shown in documentation. This can be expanded to include all symbols in a package by adding the --include-unexported/-u flag. If you want to blend the documentation generated by gomarkdoc with your own hand-written markdown, you can use the --embed/-e flag to change the gomarkdoc tool into an append/embed mode. When documentation is generated, gomarkdoc looks for a file in the location where the documentation is to be written and embeds the documentation if present. Otherwise, the documentation is appended to the end of the file. When running with embed mode enabled, gomarkdoc will look for either this single comment: Or the following pair of comments (in which case all content in between is replaced): If you would like to include files that are part of a build tag, you can specify build tags with the --tags flag. Tags are also supported through GOFLAGS, though command line and configuration file definitions override tags specified through GOFLAGS. You can also run gomarkdoc in a verification mode with the --check/-c flag. This is particularly useful for continuous integration when you want to make sure that a commit correctly updated the generated documentation. This flag is only supported when the --output/-o flag is specified, as the file provided there is what the tool is checking: If you're experiencing difficulty with gomarkdoc or just want to get more information about how it's executing underneath, you can add -v to show more logs. This can be chained a second time to show even more verbose logs: Some features of gomarkdoc rely on being able to detect information from the git repository containing the project. Since individual local git repositories may be configured differently from person to person, you may want to manually specify the information for the repository to remove any inconsistencies. This can be achieved with the --repository.url, --repository.default-branch and --repository.path options. For example, this repository would be configured with: If you want to reuse configuration options across multiple invocations, you can specify a file in the folder where you invoke gomarkdoc containing configuration information that you would otherwise provide on the command line. This file may be a JSON, TOML, YAML, HCL, env, or Java properties file, but the name is expected to start with .gomarkdoc (e.g. .gomarkdoc.yml). All configuration options are available with the camel-cased form of their long name (e.g. --include-unexported becomes includeUnexported). Template overrides are specified as a map, rather than a set of key-value pairs separated by =. Options provided on the command line override those provided in the configuration file if an option is present in both. While most users will find the command line utility sufficient for their needs, this package may also be used programmatically by installing it directly, rather than its command subpackage. The programmatic usage provides more flexibility when selecting what packages to work with and what components to generate documentation for. A common usage will look something like this: This project uses itself to generate the README files in github.com/princjef/gomarkdoc and its subdirectories. To see the commands that are run to generate documentation for this repository, take a look at the Doc() and DocVerify() functions in magefile.go and the .gomarkdoc.yml file in the root of this repository. To run these commands in your own project, simply replace `go run ./cmd/gomarkdoc` with `gomarkdoc`. Know of another project that is using gomarkdoc? Open an issue with a description of the project and link to the repository and it might be featured here!
Package badgerhold is an indexing and querying layer on top of a badger DB. The goal is to allow easy, persistent storage and retrieval of Go types. badgerDB is an embedded key-value store, and badgerhold serves a similar use case however with a higher level interface for common uses of Badger. BadgerHold deals directly with Go Types. When inserting data, you pass in your structure directly. When querying data you pass in a pointer to a slice of the type you want to return. By default Gob encoding is used. You can put multiple different types into the same DB file and they (and their indexes) will be stored separately. BadgerHold will automatically create an index for any struct fields tags with "badgerholdIndex" The first field specified in query will be used as the index (if one exists). Queries are chained together criteria that applies to a set of fields:
Package opts defines a struct-tag based API for rapidly building command-line interfaces. For example: Build and run: See https://github.com/jpillora/opts for more information and more examples.
Package conf provides support for using environmental variables and command line arguments for configuration. It is compatible with the GNU extensions to the POSIX recommendations for command-line options. See http://www.gnu.org/software/libc/manual/html_node/Argument-Syntax.html There are no hard bindings for this package. This package takes a struct value and parses it for both the environment and flags. It supports several tags to customize the flag options. The field name and any parent struct name will be used for the long form of the command name unless the name is overridden. As an example, using this config struct: The following usage information would be output you can display. Usage: conf.test [options] [arguments] OPTIONS There is an API called Parse that can process a config struct with environment variable and command line flag overrides. There is also YAML support using the yaml package that is part of this module. There is a WithParse function that takes a slice of bytes containing the YAML or WithParseReader that takes any concrete value that knows how to Read. Additionally, if the config struct has a field of the slice type conf.Args then it will be populated with any remaining arguments from the command line after flags have been processed. For example a program with a config struct like this: If that program is executed from the command line like this: Then the cfg.Args field will contain the string values ["serve", "http"]. The Args type has a method Num for convenient access to these arguments such as this: You can add a version with a description by adding the Version type to your config type and set these values at run time for display.
Package dbus implements bindings to the D-Bus message bus system. To use the message bus API, you first need to connect to a bus (usually the session or system bus). The acquired connection then can be used to call methods on remote objects and emit or receive signals. Using the Export method, you can arrange D-Bus methods calls to be directly translated to method calls on a Go value. For outgoing messages, Go types are automatically converted to the corresponding D-Bus types. The following types are directly encoded as their respective D-Bus equivalents: Slices and arrays encode as ARRAYs of their element type. Maps encode as DICTs, provided that their key type can be used as a key for a DICT. Structs other than Variant and Signature encode as a STRUCT containing their exported fields. Fields whose tags contain `dbus:"-"` and unexported fields will be skipped. Pointers encode as the value they're pointed to. Trying to encode any other type or a slice, map or struct containing an unsupported type will result in an InvalidTypeError. For incoming messages, the inverse of these rules are used, with the exception of STRUCTs. Incoming STRUCTS are represented as a slice of empty interfaces containing the struct fields in the correct order. The Store function can be used to convert such values to Go structs. Handling Unix file descriptors deserves special mention. To use them, you should first check that they are supported on a connection by calling SupportsUnixFDs. If it returns true, all method of Connection will translate messages containing UnixFD's to messages that are accompanied by the given file descriptors with the UnixFD values being substituted by the correct indices. Similarily, the indices of incoming messages are automatically resolved. It shouldn't be necessary to use UnixFDIndex.
Package badgerhold is an indexing and querying layer on top of a badger DB. The goal is to allow easy, persistent storage and retrieval of Go types. badgerDB is an embedded key-value store, and badgerhold serves a similar use case however with a higher level interface for common uses of Badger. BadgerHold deals directly with Go Types. When inserting data, you pass in your structure directly. When querying data you pass in a pointer to a slice of the type you want to return. By default Gob encoding is used. You can put multiple different types into the same DB file and they (and their indexes) will be stored separately. BadgerHold will automatically create an index for any struct fields tags with "badgerholdIndex" The first field specified in query will be used as the index (if one exists). Queries are chained together criteria that applies to a set of fields:
Package badgerhold is an indexing and querying layer on top of a badger DB. The goal is to allow easy, persistent storage and retrieval of Go types. badgerDB is an embedded key-value store, and badgerhold serves a similar use case however with a higher-level interface for common uses of Badger. BadgerHold deals directly with Go Types. When inserting data, you pass in your structure directly. When querying data you pass in a pointer to a slice of the type you want to return. By default, Gob encoding is used. You can put multiple different types into the same DB file and they (and their indexes) will be stored separately. BadgerHold will automatically create an index for any struct fields tags with "badgerholdIndex" The first field specified in query will be used as the index (if one exists). Queries are chained together criteria that applies to a set of fields:
Package sheriff transforms structs into a map based on specific tags on the struct fields. A typical use is an API which marshals structs into JSON and maintains different API versions. Using sheriff, struct fields can be annotated with API version and group tags. By invoking sheriff with specific options, those tags determine whether a field will be added to the output map or not. It can then be marshalled using "encoding/json".
This is the official Go SDK for Oracle Cloud Infrastructure Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#installing for installation instructions. Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring for configuration instructions. The following example shows how to get started with the SDK. The example belows creates an identityClient struct with the default configuration. It then utilizes the identityClient to list availability domains and prints them out to stdout More examples can be found in the SDK Github repo: https://github.com/oracle/oci-go-sdk/tree/master/example Optional fields are represented with the `mandatory:"false"` tag on input structs. The SDK will omit all optional fields that are nil when making requests. In the case of enum-type fields, the SDK will omit fields whose value is an empty string. The SDK uses pointers for primitive types in many input structs. To aid in the construction of such structs, the SDK provides functions that return a pointer for a given value. For example: The SDK exposes functionality that allows the user to customize any http request before is sent to the service. You can do so by setting the `Interceptor` field in any of the `Client` structs. For example: The Interceptor closure gets called before the signing process, thus any changes done to the request will be properly signed and submitted to the service. The SDK exposes a stand-alone signer that can be used to signing custom requests. Related code can be found here: https://github.com/oracle/oci-go-sdk/blob/master/common/http_signer.go. The example below shows how to create a default signer. The signer also allows more granular control on the headers used for signing. For example: You can combine a custom signer with the exposed clients in the SDK. This allows you to add custom signed headers to the request. Following is an example: Bear in mind that some services have a white list of headers that it expects to be signed. Therefore, adding an arbitrary header can result in authentications errors. To see a runnable example, see https://github.com/oracle/oci-go-sdk/blob/master/example/example_identity_test.go For more information on the signing algorithm refer to: https://docs.cloud.oracle.com/Content/API/Concepts/signingrequests.htm Some operations accept or return polymorphic JSON objects. The SDK models such objects as interfaces. Further the SDK provides structs that implement such interfaces. Thus, for all operations that expect interfaces as input, pass the struct in the SDK that satisfies such interface. For example: In the case of a polymorphic response you can type assert the interface to the expected type. For example: An example of polymorphic JSON request handling can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_test.go#L63 When calling a list operation, the operation will retrieve a page of results. To retrieve more data, call the list operation again, passing in the value of the most recent response's OpcNextPage as the value of Page in the next list operation call. When there is no more data the OpcNextPage field will be nil. An example of pagination using this logic can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_pagination_test.go The SDK has a built-in logging mechanism used internally. The internal logging logic is used to record the raw http requests, responses and potential errors when (un)marshalling request and responses. Built-in logging in the SDK is controlled via the environment variable "OCI_GO_SDK_DEBUG" and its contents. The below are possible values for the "OCI_GO_SDK_DEBUG" variable 1. "info" or "i" enables all info logging messages 2. "debug" or "d" enables all debug and info logging messages 3. "verbose" or "v" or "1" enables all verbose, debug and info logging messages 4. "null" turns all logging messages off. If the value of the environment variable does not match any of the above then default logging level is "info". If the environment variable is not present then no logging messages are emitted. The default destination for logging is Stderr and if you want to output log to a file you can set via environment variable "OCI_GO_SDK_LOG_OUTPUT_MODE". The below are possible values 1. "file" or "f" enables all logging output saved to file 2. "combine" or "c" enables all logging output to both stderr and file You can also customize the log file location and name via "OCI_GO_SDK_LOG_FILE" environment variable, the value should be the path to a specific file If this environment variable is not present, the default location will be the project root path Sometimes you may need to wait until an attribute of a resource, such as an instance or a VCN, reaches a certain state. An example of this would be launching an instance and then waiting for the instance to become available, or waiting until a subnet in a VCN has been terminated. You might also want to retry the same operation again if there's network issue etc... This can be accomplished by using the RequestMetadata.RetryPolicy(request level configuration), alternatively, global(all services) or client level RetryPolicy configration is also possible. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_retry_test.go If you are trying to make a PUT/POST API call with binary request body, please make sure the binary request body is resettable, which means the request body should inherit Seeker interface. The Retry behavior Precedence (Highest to lowest) is defined as below:- The OCI Go SDK defines a default retry policy that retries on the errors suitable for retries (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm), for a recommended period of time (up to 7 attempts spread out over at most approximately 1.5 minutes). The default retry policy is defined by : Default Retry-able Errors Below is the list of default retry-able errors for which retry attempts should be made. The following errors should be retried (with backoff). HTTP Code Customer-facing Error Code Apart from the above errors, retries should also be attempted in the following Client Side errors : 1. HTTP Connection timeout 2. Request Connection Errors 3. Request Exceptions 4. Other timeouts (like Read Timeout) The above errors can be avoided through retrying and hence, are classified as the default retry-able errors. Additionally, retries should also be made for Circuit Breaker exceptions (Exceptions raised by Circuit Breaker in an open state) Default Termination Strategy The termination strategy defines when SDKs should stop attempting to retry. In other words, it's the deadline for retries. The OCI SDKs should stop retrying the operation after 7 retry attempts. This means the SDKs will have retried for ~98 seconds or ~1.5 minutes have elapsed due to total delays. SDKs will make a total of 8 attempts. (1 initial request + 7 retries) Default Delay Strategy Default Delay Strategy - The delay strategy defines the amount of time to wait between each of the retry attempts. The default delay strategy chosen for the SDK – Exponential backoff with jitter, using: 1. The base time to use in retry calculations will be 1 second 2. An exponent of 2. When calculating the next retry time, the SDK will raise this to the power of the number of attempts 3. A maximum wait time between calls of 30 seconds (Capped) 4. Added jitter value between 0-1000 milliseconds to spread out the requests Configure and use default retry policy You can set this retry policy for a single request: or for all requests made by a client: or for all requests made by all clients: or setting default retry via environment varaible, which is a global switch for all services: Some services enable retry for operations by default, this can be overridden using any alternatives mentioned above. To know which service operations have retries enabled by default, look at the operation's description in the SDK - it will say whether that it has retries enabled by default Some resources may have to be replicated across regions and are only eventually consistent. That means the request to create, update, or delete the resource succeeded, but the resource is not available everywhere immediately. Creating, updating, or deleting any resource in the Identity service is affected by eventual consistency, and doing so may cause other operations in other services to fail until the Identity resource has been replicated. For example, the request to CreateTag in the Identity service in the home region succeeds, but immediately using that created tag in another region in a request to LaunchInstance in the Compute service may fail. If you are creating, updating, or deleting resources in the Identity service, we recommend using an eventually consistent retry policy for any service you access. The default retry policy already deals with eventual consistency. Example: This retry policy will use a different strategy if an eventually consistent change was made in the recent past (called the "eventually consistent window", currently defined to be 4 minutes after the eventually consistent change). This special retry policy for eventual consistency will: 1. make up to 9 attempts (including the initial attempt); if an attempt is successful, no more attempts will be made 2. retry at most until (a) approximately the end of the eventually consistent window or (b) the end of the default retry period of about 1.5 minutes, whichever is farther in the future; if an attempt is successful, no more attempts will be made, and the OCI Go SDK will not wait any longer 3. retry on the error codes 400-RelatedResourceNotAuthorizedOrNotFound, 404-NotAuthorizedOrNotFound, and 409-NotAuthorizedOrResourceAlreadyExists, for which the default retry policy does not retry, in addition to the errors the default retry policy retries on (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm) If there were no eventually consistent actions within the recent past, then this special retry strategy is not used. If you want a retry policy that does not handle eventual consistency in a special way, for example because you retry on all error responses, you can use DefaultRetryPolicyWithoutEventualConsistency or NewRetryPolicyWithOptions with the common.ReplaceWithValuesFromRetryPolicy(common.DefaultRetryPolicyWithoutEventualConsistency()) option: The NewRetryPolicy function also creates a retry policy without eventual consistency. Circuit Breaker can prevent an application repeatedly trying to execute an operation that is likely to fail, allowing it to continue without waiting for the fault to be rectified or wasting CPU cycles, of course, it also enables an application to detect whether the fault has been resolved. If the problem appears to have been rectified, the application can attempt to invoke the operation. Go SDK intergrates sony/gobreaker solution, wraps in a circuit breaker object, which monitors for failures. Once the failures reach a certain threshold, the circuit breaker trips, and all further calls to the circuit breaker return with an error, this also saves the service from being overwhelmed with network calls in case of an outage. Circuit Breaker Configuration Definitions 1. Failure Rate Threshold - The state of the CircuitBreaker changes from CLOSED to OPEN when the failure rate is equal or greater than a configurable threshold. For example when more than 50% of the recorded calls have failed. 2. Reset Timeout - The timeout after which an open circuit breaker will attempt a request if a request is made 3. Failure Exceptions - The list of Exceptions that will be regarded as failures for the circuit. 4. Minimum number of calls/ Volume threshold - Configures the minimum number of calls which are required (per sliding window period) before the CircuitBreaker can calculate the error rate. 1. Failure Rate Threshold - 80% - This means when 80% of the requests calculated for a time window of 120 seconds have failed then the circuit will transition from closed to open. 2. Minimum number of calls/ Volume threshold - A value of 10, for the above defined time window of 120 seconds. 3. Reset Timeout - 30 seconds to wait before setting the breaker to halfOpen state, and trying the action again. 4. Failure Exceptions - The failures for the circuit will only be recorded for the retryable/transient exceptions. This means only the following exceptions will be regarded as failure for the circuit. HTTP Code Customer-facing Error Code Apart from the above, the following client side exceptions will also be treated as a failure for the circuit : 1. HTTP Connection timeout 2. Request Connection Errors 3. Request Exceptions 4. Other timeouts (like Read Timeout) Go SDK enable circuit breaker with default configuration for most of the service clients, if you don't want to enable the solution, can disable the functionality before your application running Go SDK also supports customize Circuit Breaker with specified configurations. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_circuitbreaker_test.go To know which service clients have circuit breakers enabled, look at the service client's description in the SDK - it will say whether that it has circuit breakers enabled by default The GO SDK uses the net/http package to make calls to OCI services. If your environment requires you to use a proxy server for outgoing HTTP requests then you can set this up in the following ways: 1. Configuring environment variable as described here https://golang.org/pkg/net/http/#ProxyFromEnvironment 2. Modifying the underlying Transport struct for a service client In order to modify the underlying Transport struct in HttpClient, you can do something similar to (sample code for audit service client): The Object Storage service supports multipart uploads to make large object uploads easier by splitting the large object into parts. The Go SDK supports raw multipart upload operations for advanced use cases, as well as a higher level upload class that uses the multipart upload APIs. For links to the APIs used for multipart upload operations, see Managing Multipart Uploads (https://docs.cloud.oracle.com/iaas/Content/Object/Tasks/usingmultipartuploads.htm). Higher level multipart uploads are implemented using the UploadManager, which will: split a large object into parts for you, upload the parts in parallel, and then recombine and commit the parts as a single object in storage. This code sample shows how to use the UploadManager to automatically split an object into parts for upload to simplify interaction with the Object Storage service: https://github.com/oracle/oci-go-sdk/blob/master/example/example_objectstorage_test.go Some response fields are enum-typed. In the future, individual services may return values not covered by existing enums for that field. To address this possibility, every enum-type response field is a modeled as a type that supports any string. Thus if a service returns a value that is not recognized by your version of the SDK, then the response field will be set to this value. When individual services return a polymorphic JSON response not available as a concrete struct, the SDK will return an implementation that only satisfies the interface modeling the polymorphic JSON response. If you are using a version of the SDK released prior to the announcement of a new region, you may need to use a workaround to reach it, depending on whether the region is in the oraclecloud.com realm. A region is a localized geographic area. For more information on regions and how to identify them, see Regions and Availability Domains(https://docs.cloud.oracle.com/iaas/Content/General/Concepts/regions.htm). A realm is a set of regions that share entities. You can identify your realm by looking at the domain name at the end of the network address. For example, the realm for xyz.abc.123.oraclecloud.com is oraclecloud.com. oraclecloud.com Realm: For regions in the oraclecloud.com realm, even if common.Region does not contain the new region, the forward compatibility of the SDK can automatically handle it. You can pass new region names just as you would pass ones that are already defined. For more information on passing region names in the configuration, see Configuring (https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring). For details on common.Region, see (https://github.com/oracle/oci-go-sdk/blob/master/common/common.go). Other Realms: For regions in realms other than oraclecloud.com, you can use the following workarounds to reach new regions with earlier versions of the SDK. NOTE: Be sure to supply the appropriate endpoints for your region. You can overwrite the target host with client.Host: If you are authenticating via instance principals, you can set the authentication endpoint in an environment variable: Got a fix for a bug, or a new feature you'd like to contribute? The SDK is open source and accepting pull requests on GitHub https://github.com/oracle/oci-go-sdk Licensing information available at: https://github.com/oracle/oci-go-sdk/blob/master/LICENSE.txt To be notified when a new version of the Go SDK is released, subscribe to the following feed: https://github.com/oracle/oci-go-sdk/releases.atom Please refer to this link: https://github.com/oracle/oci-go-sdk#help
Package statsd implements high-performance, zero-allocation statsd client. Go statsd client library with zero allocation overhead, great performance and automatic reconnects. With statsd architecture aggregation is performed on statsd server side (e.g. using high-performance servers like statsite), so application emits many metrics per user action. Performance of statsd client library is critical to introduce as little overhead as possible. Client has zero memory allocation per metric being sent, architecture is the following: Ideas were borrowed from the following stastd clients: Initialize client instance with options, one client per application is usually enough: Send metrics as events happen in the application, metrics will be packed together and delivered to statsd server: Shutdown client during application shutdown to flush all the pending metrics: Metrics could be tagged to support aggregation on TSDB side. go-statsd supports tags in InfluxDB and Datadog formats. Format and default tags (applied to every metric) are passed as options to the client initialization: For every metric sent, tags could be added as the last argument(s) to the function call:
Package validator implements value validations for structs and individual fields based on tags. It can also handle Cross Field and Cross Struct validation for nested structs and has the ability to dive into arrays and maps of any type. Why not a better error message? because this library intends for you to handle your own error messages. Why should I handle my own errors? Many reasons, for us building an internationalized application I needed to know the field and what validation failed so that I could provide an error in the users specific language. Custom functions can be added Cross Field Validation can be implemented, for example Start & End Date range validation Multiple validators on a field will process in the order defined Bad Validator definitions are not handled by the library NOTE: Baked In Cross field validation only compares fields on the same struct, if cross field + cross struct validation is needed your own custom validator should be implemented. NOTE2: comma is the default separator of validation tags, if you wish to have a comma included within the parameter i.e. excludesall=, you will need to use the UTF-8 hex representation 0x2C, which is replaced in the code as a comma, so the above will become excludesall=0x2C NOTE3: pipe is the default separator of or validation tags, if you wish to have a pipe included within the parameter i.e. excludesall=| you will need to use the UTF-8 hex representation 0x7C, which is replaced in the code as a pipe, so the above will become excludesall=0x7C Here is a list of the current built in validators: Validator notes: This package panics when bad input is provided, this is by design, bad code like that should not make it to production.
Package bindata converts any file into manageable Go source code. Useful for embedding binary data into a go program. The file data is optionally gzip compressed before being converted to a raw byte slice. The following paragraphs cover some of the customization options which can be specified in the Config struct, which must be passed into the Translate() call. When used with the `Debug` option, the generated code does not actually include the asset data. Instead, it generates function stubs which load the data from the original file on disk. The asset API remains identical between debug and release builds, so your code will not have to change. This is useful during development when you expect the assets to change often. The host application using these assets uses the same API in both cases and will not have to care where the actual data comes from. An example is a Go webserver with some embedded, static web content like HTML, JS and CSS files. While developing it, you do not want to rebuild the whole server and restart it every time you make a change to a bit of javascript. You just want to build and launch the server once. Then just press refresh in the browser to see those changes. Embedding the assets with the `debug` flag allows you to do just that. When you are finished developing and ready for deployment, just re-invoke `go-bindata` without the `-debug` flag. It will now embed the latest version of the assets. The `NoMemCopy` option will alter the way the output file is generated. It will employ a hack that allows us to read the file data directly from the compiled program's `.rodata` section. This ensures that when we call call our generated function, we omit unnecessary memcopies. The downside of this, is that it requires dependencies on the `reflect` and `unsafe` packages. These may be restricted on platforms like AppEngine and thus prevent you from using this mode. Another disadvantage is that the byte slice we create, is strictly read-only. For most use-cases this is not a problem, but if you ever try to alter the returned byte slice, a runtime panic is thrown. Use this mode only on target platforms where memory constraints are an issue. The default behaviour is to use the old code generation method. This prevents the two previously mentioned issues, but will employ at least one extra memcopy and thus increase memory requirements. For instance, consider the following two examples: This would be the default mode, using an extra memcopy but gives a safe implementation without dependencies on `reflect` and `unsafe`: Here is the same functionality, but uses the `.rodata` hack. The byte slice returned from this example can not be written to without generating a runtime error. The NoCompress option indicates that the supplied assets are *not* GZIP compressed before being turned into Go code. The data should still be accessed through a function call, so nothing changes in the API. This feature is useful if you do not care for compression, or the supplied resource is already compressed. Doing it again would not add any value and may even increase the size of the data. The default behaviour of the program is to use compression. The keys used in the `_bindata` map are the same as the input file name passed to `go-bindata`. This includes the path. In most cases, this is not desirable, as it puts potentially sensitive information in your code base. For this purpose, the tool supplies another command line flag `-prefix`. This accepts a [regular expression](https://github.com/google/re2/wiki/Syntax) string, which will be used to match a portion of the map keys and function names that should be stripped out. For example, running without the `-prefix` flag, we get: Running with the `-prefix` flag, we get: With the optional Tags field, you can specify any go build tags that must be fulfilled for the output file to be included in a build. This is useful when including binary data in multiple formats, where the desired format is specified at build time with the appropriate tags. The tags are appended to a `// +build` line in the beginning of the output file and must follow the build tags syntax specified by the go tool. When you want to embed big files or plenty of files, then the generated output is really big (maybe over 3Mo). Even if the generated file shouldn't be read, you probably need use analysis tool or an editor which can become slower with a such file. Generating big files can be avoided with `-split` command line option. In that case, the given output is a directory path, the tool will generate one source file per file to embed, and it will generate a common file nammed `common.go` which contains commons parts like API.