@bodiless/table

Table Component

The Table Component provides a way to add tabular data to your site.

Content Editor Details

The Table Component Edit UI allows for table rows and columns to be added, deleted, and reordered.

Component Variations

By default, two variations of the Table Component are available to choose from:

• Table: A table with a header row.
• Table Header First Column: A table with a header row and a header column.

Add a Table

To add a Table Component to your page:

1. While in Edit Mode, select a Flow Container, and, within its context menu, under "Component," click Add (or Swap, if you're replacing a component).
2. In the "Insert Component" modal, under "Type," check the "Table" checkbox, and select the table variation you would like to add.
   • See details about the default table variations under Component Variations.
   • Hover over the "i" icon for information about a particular table variation.
     

Edit and Format Table Text

To edit the text within a Table Component, select the table cell you'd like to edit, and enter the desired text.

To format the text within a Table Component, highlight the text you'd like to format, and use the Rich Text Editor formatting toolbar that pops up.

?> Note: Bulk cell-selection (highlighting) is not possible; you can only highlight — and, therefore, format — text within a single cell at a time.

?> Note: For more information on the Rich Text Editor, please see: Rich Text Editor Component.

Add Columns and Rows

You can add columns and rows to a Table Component using the context menu. (You must be in Edit Mode.)

• Add a Column
• Add a Row
• Add a Header Row
• Add a Footer Row

Add a Column

To add a column to your table:

1. Select the column to the left of where you would like to add a new column.
2. From the context menu, under "Column," click Add.
   
   A new column will appear to the right of the column you selected.

?> Note: If you're using the Table Header First Column Table variant, you can only have one header column. (This is unlike header rows, of which there can be multiple.)

Add a Row

To add a body (i.e., non-header/non-footer) row to your table:

1. Select the row above where you would like to add a new row.
   • Note: Selecting a header or footer row will not provide the correct context menu.
     • If you want to add a body row directly below a header row, see the note below.
     • If you want to add a body row directly below a footer row, you can't; only more footer rows can be added below a footer row.
2. From the context menu, under "Row," click Add.
   
   A new row will appear below the row you selected.

Add a Header Row

Both of the default Table Component variants already have a header row, but you're able to add as many as you require.

Header rows can only be positioned in the header (upper) region of a table — they cannot be added or moved below it. Body rows and footer rows cannot be positioned above a header row.

To add a header row to your table:

1. Select the header row above where you would like to add a new header row.
2. From the context menu, under "Header Row," click Add.
   
   A new header row will appear below the header row you selected.

Add a Footer Row

Footer rows are typically used for column summaries. Neither of the included Table Component variants include a footer row by default, but you may add as many as you require.

Footer rows can only be positioned in the footer (lower) region of a table — they cannot be added or moved above it. Body rows and header rows cannot be positioned below a footer row.

To add a footer row to your table:

• If your table doesn't have a footer row yet: 01. You may select anywhere on the table. 01. From the context menu, under "Table," click Footer (designated with an "add" icon (+)).
  
  A footer row will be added to the bottom of your table.
• If your table already has one or more footer rows: 01. Select the footer row above where you would like to add a new footer row. 01. From the context menu, under "Footer Row," click Add.
  
  A new footer row will appear below the footer row you selected.

Out of the box, footer rows don't appear any different from body rows — and, depending on the styling of your site, this may remain the case. If you need to discern whether a row is a body row or a footer row, simply select it, and, in its context menu, you will see either a "Row" section or a "Footer Row" section, revealing the type of row that it is.

Delete Columns and Rows

To delete a column or row from your table:

1. Select a table cell in the column or row that you would like to remove.
2. From the context menu, under "Column" or "Row," click Delete.
   
   The selected column or row will be removed from your table.
   • Note: A selected header or footer row will have the "Row" section in the context menu replaced with the according "Header Row" or "Footer Row" section.

?> Note: If you're using the Table Header First Column Table variant, the column in the first (leftmost) position is always styled as the header column. If you delete the header column, the second column will become the first column, and, thus, become the new header column.

Move Columns and Rows

Using the Move button in the context menu, columns and rows can be reordered.

The Move operation moves items in a single direction:

• Columns are moved to the right.
  • I.e., a moved column will swap places with the column to its immediate right.
• Rows are moved down.
  • I.e., a moved row will swap places with the row directly below it.

To move a column or row:

1. Select a table cell in the column or row that you would like to reorder.
2. From the context menu, under "Column" or "Row," click Move.
   
   The selected column or row will be moved to the right or down, respectively.
   • Note: A selected header or footer row will have the "Row" section in the context menu replaced with the according "Header Row" or "Footer Row" section.

?> Note: If you're using the Table Header First Column Table variant, the column in the first (leftmost) position is always styled as the header column. If you move the header column, the data from the first column will be swapped with that of the second, and the first column (which now contains what was the second column's data) will continue to be styled as the header column.

?> Note: A row can't be moved out of its respective region.

Header, body, and footer rows are restricted to the upper, middle, and lower regions of the table, respectively, and cannot be reordered out of those regions.
(E.g., a header row can't be moved below a body row.)

Site Builder Details

Usage

const TableExample = asToken(
  withDesign({
    Header: addClasses('text-center'),
  }),
  asBodilessTable(),
  asDefaultTableStyle,
)(CleanTable);

The table is made editable via asBodilessTable().

<TableExample nodeKey="table-1" />

Design Components

The Table Component follows the Bodiless Design Pattern and is easy to style. Styling can be implemented in the appropriate token.tsx file by adding the necessary Tailwind classes (see asTableDefaultStyle in examples/test-site/src/components/Table/index.tsx).
Here is an example demonstrating all possible design components:

import { withDesign, addClasses } from '@bodiless/fclasses';

const asTableExampleStyle = withDesign({
  Wrapper: addClasses('p-3'),
  THead: addClasses('bg-gray-200'),
  TBody: addClasses('text-primary'),
  TFoot: addClasses('ml-2'),
  Row: addClasses('ml-2'),
  Cell: addClasses('border border-solid border-gray-200'),
});

Because each Cell knows where it is in the table, it is possible to use conditional styling. There are several helper functions for this; or you can provide a custom function with all Cell Props, as well as table data.

import { withDesign, addClasses, addClassesIf, and, not } from '@bodiless/fclasses';
import { useIsFirstColumn, useIsOddColumnn } from '@bodiless/organisms';

const asTableExampleStyle = withDesign({
  Cell: asToken(
    /**
     * Here, we apply a dark column to alternating rows in the Body, left-align
     * text in the first column, and center-align text in the remaining columns.
     */
    addClassesIf(and(useIsInBody, useIsOddColumnn))('bg-gray-200'),
    addClassesIf(useIsFirstColumn)('text-left'),
    addClassesIf(not(useIsFirstColumn))('text-center'),
    /**
     * Here, we use a custom function to style the penultimate column.
     */
    addClassesIf((p) => p.columnIndex === (p.tableData.columns.length - 2))('bg-color-orange-700'),
  ),
});

?> Note: useIsOddColumnn is the name of the function, and is not a typo in the documentation.

Architectural Details

The Table Component will render as a typical HTML <table> element.

For example, the following TSX—

const TableExample = asToken(
  asTableCenterText,
)(StandardTable);

export default (props: any) => (
  <Page {...props}>
    <Layout>
      { /* @ts-ignore missing unnecessary rows, columns, headRows and footRows props */ }
      <TableExample nodeKey="table-1" data-list-element="outerlist" />
    </Layout>
  </Page>
);

—Will render an HTML <table> element like the following (a number of details have been stripped for demonstration purposes):

<table data-bl-design-key="Table:Wrapper" data-list-element="outerlist" class="...">
  <thead data-bl-design-key="Table:THead" class="...">...</thead>
  <tbody data-bl-design-key="Table:TBody">
    <tr data-bl-design-key="Table:Row">
      <td data-bl-design-key="Table:Cell" class="text-center ...">...</td>
      <td data-bl-design-key="Table:Cell" class="text-center ...">...</td>
      <td data-bl-design-key="Table:Cell" class="text-center ...">...</td>
    </tr>
    <tr data-bl-design-key="Table:Row">...</tr>
    <tr data-bl-design-key="Table:Row">...</tr>
  </tbody>
  <tfoot data-bl-design-key="Table:TFoot"></tfoot>
</table>

Note that header and footer rows are appropriately positioned within <thead> and <tfoot> elements, respectively.