Generate design tokens, export graphics, and extract design token-driven React components from your Figma documents. Inspired by Salesforce Theo.
Figmagic promotes a structured way of assembling design systems. Following the primary principle of atomic design, Figmagic wants you to build from the bottom up, beginning with decomposing the tokens. Tokens shape elements, which form components, that are ordered in compositions, which get presented in views... You know the drill, though I am switching Brad Frost's nomenclature into something more front-end friendly.
When it comes to code generation, Figmagic tries to do this in a better way. Instead of over-eagerly promoting hardcoded code generation from huge and complex components, Figmagic tries to competently, or at least "mostly-right", handle automation for things that should not be too context-dependent or manual input-heavy. Code should also be as close to "normal" as possible—meaning that generated code binds values to tokens and not some random px values as other platforms do. All of this can happen because Figmagic assumes a way of working that respects standard CSS and HTML: no magic trickery! Figmagic avoids some of the cognitive and technical overhead by introducing a concept called Elements, which are Figmagic-compliant components that can be output into code. By composing larger components out of simple Elements, code generation is made much more manageable while also promoting much more structured design.
Figmagic does not aim at completely removing designers or developers: It just aims to move them closer, while eliminating any of the tedious busywork that has grown around front-end development.
Please note: Figmagic requires that your document structure is identical to what I show in the template at https://www.figma.com/community/file/821094451476848226/Figmagic-%E2%80%94-Design-System-for-Tokens.
Figmagic is compiled from Typescript to ES6, so you should have Node 10 or later for it to work on your machine.
Built initially as an internal handoff tool for Humblebee.
An example project—using React, Styled Components and Storybook—is available at https://github.com/mikaelvesavuori/figmagic-example.
Note that this demo is not meant to fully style and do all of the things in the Figma document. I wanted to straddle a middle-of-the-road solution where I did the least work possible to get it working with React and style only a few of the most obvious and helpful elements, like setting disabled state on the button and checkbox.
Figmagic Example Demo: On the left is a big Figma component assembled of a number of "Elements", Figmagic-compliant components that can be output into code. On the right is the React-composed version of those after just a few minutes of coding and closing elements correctly.
Run npm install -g figmagic or yarn global add figmagic.
Local usage is possible by installing Figmagic as a developer dependency (under devDependencies) with npm install figmagic -D or yarn add figmagic -D, then using a script pointing to the local version, like so:
"scripts": {
"figmagic": "npx figmagic"
}
figmagic.json or .figmagicrc)Figmagic can be run without any configuration. You will always need to specify your Figma API token and Figma document ID, though! However, it's highly recommended to add a configuration: it's easy and gives you a ton of possibilities to optimize for your own needs.
Run figmagic init to initialize a basic configuration file, either named figmagic.json or .figmagicrc file. As long as you provide your Figma token and document ID/URL, the new generated file is ready to use for Element Sync which can only be done if your configuration points to valid code generation templates (which the generated one does). You'll see that the config will point templates.templatePath{Graphic|React|Styled|Storybook} to ./node_modules/figmagic/templates/{graphic|react|styled|story}. Read more under the Configuration file section.
First of all, get your Figma API token and Figma URL:
Copy Link—the first, long junk-looking bit is the ID.Pass in your Figma API token and Figma URL by either:
.env file with your own file ID (i.e. similar to 821094451476848226) or full Figma URL (i.e. similar to https://www.figma.com/file/821094451476848226/Figmagic-%E2%80%94-Design-System-template-4.0) and API token key.figmagic --token {TOKEN} --url {URL} (substitute curly braces for your actual values)figmagic.json/.figmagicrc under token and url. This is discouraged since you will display these values in clear text and you probably don't want that.Then:
figmagic/.figmagic) and a folder with tokens (default: /tokens) in the rootWhen running figmagic, files will be moved with the Node module trash (multi-platform) into your OS's trash can. Thus, you can recover anything unintentionally overwritten.
Folder names below follow their default naming. The naming is possible to change via configuration.
.figmagic will contain the extracted JSON retrieved from Figma's APItokens will contain the token fileselements will contain the generated codegraphics will contain graphicsFor a more complete description of the code structure, see the Code structure section.
Go to https://www.figma.com/community/file/821094451476848226/Figmagic-%E2%80%94-Design-System-for-Tokens and make your own copy. Go at it by using the document ID as the FIGMA_URL or start copying in your own work.
Your structure needs to correspond to the following:
Design tokens. Without this page you can't really do much with Figmagic.Design tokens page, frames need to exist. You can have any number of supported token frame. For starters, name them Colors, Font sizes, Font families, Font weights, Line heights, and Spacing – exact casing is not important, however the spelling is important! For a full list of token types, see the types of design tokens Figmagic can extract.See a template design system at https://www.figma.com/community/file/821094451476848226/Figmagic-%E2%80%94-Design-System-template-4.0. Feel free to simply copy-paste it or base your own work around it.
Note: Refer to the document structure in the image below and in the template linked above.
How a Figmagic project could be structured in regards to tokens, if you want to support all currently available token types.
Design tokens are the abstract but shared elements from which your design system is built.
Design tokens express any of the individual values that you build from, such as colors, spacing, and typographic features.
Tokens offer a form of “contract” between a designer’s intent and its fulfillment by developers. This means that both sides agree to avoid by all means anything that’s not codified also as a token. For example, avoiding spacing values that are not also available as a token. It’s similar in many ways to old-school styleguides, but tokens should only ever communicate strict, hard values. Styleguides can tend to be context-sensitive and full of explanation—tokens must communicate without context or explanation.
However: You may still want to add written guidance for usage. It’s just that the tokens should be able to be consumed without understanding anything specific about them.
You should bind tokens to Figma styles whenever and wherever possible to simplify your own design work, but make sure that those are also represented in the Tokens page, as this page is where a developer will pick up tokens with Figmagic.
You can currently extract design tokens for:
A typical use-case for the generated documents is to feed the extracted values into CSS systems that support external values (such as Styled Components, Emotion, Styled System, any other CSS-in-JS libraries, or maybe even Sass).
Figma styles became publicly available in June 2018 and are incredibly valuable for designers to create single-sources-of-truth when it comes to design values (tokens). When using Figmagic though, the thinking and usage is a bit different from how Figma styles work.
A Figma style is multidimensional: It contains any number of properties wrapped into one style, acting as kind of a package. This is handy in a design environment and is practical from a user standpoint. The user doesn't have to think too hard about storing "redundant" values that are the same in another component, such as N number of units for line height: They are all taken care of.
Figmagic instead expresses tokens as instances of every individual value, thus being unidimensional – meaning they store only one value per item. Examples could be sets of line heights, font weights, or font sizes, each one individually specified. What this entails for they developer and designer, is that values can be used and mixed as pleased in any number of contexts, not becoming bound to one specific context such as a certain kind of heading. For a developer this is good because we would rather just map out the definitive values for something, onto a component (a "context" so to speak).
Because of this difference, the appropriate way to structure a Figmagic-compatible Figma design document is to display one or more items/tokens in the respective frames that correspond to the accepted token types (line height, font size...) where each item has only one key property that's changed in-between them (such as one text using size 48, the next using size 40...), since those items are what Figmagic loops through when creating your code tokens.
One of the major deviations from this principle is "Fonts" where you can specify more properties than one. However, then those need to individually match other typographical tokens you might have, such as line heights.
The "Heading L" font token is composed of values that are also represented in the "lesser" uni-dimensional tokens: displayed here are "Line Height S" (135% line height), "H1" (size 48), and "Font Bold" (Bold font style). Setting this font as a Figma Style will make your life as a designer much easier as your apply the text style to things. Auto-generating code with Figmagic will also work just fine, since the individual values are respected.
Whatever suits you! As long as you remember that what Figmagic fetches are those single (unidimensional) values from each design item/token it should all work. I've seen that Figma styles make the "contract" between tokens and their day-to-day workflow with designers a lot easier. Again though, Figmagic does not use those values; think of them as a convenient glue.
By default this is turned on. You will need to have a page named "Design tokens", where your tokens lay within named frames.
Tokens are the "bread and butter" of Figmagic. Without tokens, Figmagic cannot create elements. And even without elements, tokens provide the core experience to help you run a competent design system with code.
In case you want to skip generating tokens for a given frame, you can just add a leading underscore to the frame name. You can also skip individual items by naming them ignore or adding a leading underscore.
This is activated by default, but it's now possible to deactivate it if you have very specific reasons to do so.
By default this is turned off. Pass in --syncGraphics as a flag to sync them or enable that in your configuration file. You will need to have a page named "Graphics", where your components lay directly on the artboard.
Graphics can be exported in multiple formats with Figmagic. Instead of doing manual hand-overs, just tell your developer(s) that there have been updates to the graphics and let them pull the latest versions from your Figma document.
Again, please look at the template at https://www.figma.com/community/file/821094451476848226/Figmagic-%E2%80%94-Design-System-for-Tokens for reference.
This is also turned off by default. Pass in --syncElements or enable it in your configuration file to generate code from your Figma components.
Upcoming versions of Figmagic may attempt to support Figma Variants, but that will have to be publicly released first, and then vetted against what Figmagic can generate before I commit to supporting that model. Until then, the existing mental model of "Elements" will continue to be used.
Elements are named so because they are primarily meant to help scaffold anything that maps to standard HTML elements like input, button, h1, and form. With scaffolding we mean that these elements can be generated as code in a shape that is fitting for continued development. Elements are a good entry-point both for design and for code generation, since they are relatively simple and as a concept map to HTML, which in turn is based on tags ("elements").
Elements are generated by parsing your structured Figma components into either "flat" or "nested" varieties. Any values, say a height of 48px and a specific blue color, will try to be derived from your relevant tokens. Therefore, without tokens, elements cannot be generated! In this example, maybe the height will map to a spacing token that uses 48px (mapping to 3rem where 3 x 16 = 48, with 16 being the root REM value) and the color might be mapped to a color in your color tokens.
If you need more information and guidance on this, see the dedicated documentation section at Figmagic Element Sync.
There are several ways in which you can provide Figmagic with knowledge about how you want it to parse your tokens. You can combine them, but beware of the below prioritization chart (from lowest to highest):
figmagic.json/.figmagicrc file.env file using dotenv)If possible, stick to one way of providing settings.
Non-provided values will fall back to defaults outlined in bin/entities/Config/baseConfig.ts.
figmagic.json or .figmagicrc)You can use a JSON-formated configuration file at the root of a project to use its settings. Figmagic will pick up the path by assessing the current working directory and looking for either a figmagic.json or .figmagicrc file there. If it finds it, it will use it.
An example file is provided in Figmagic—you can find it in the root of the project. The file is named figmagicrc, just add the leading dot and place the file in your own project folder to use it. To use it as JSON, add json as the file ending.
Since this is a configuration file, you'll need to be careful to write it correctly or you may end up with failures and errors.
Below is a complete set of what you can configure, together with the defaults.
{
"debugMode": false,
"fontUnit": "rem",
"letterSpacingUnit": "em",
"opacitiesUnit": "float",
"figmaData": "figma.json",
"figmagicFolder": ".figmagic",
"outputFolderElements": "elements",
"outputFolderGraphics": "graphics",
"outputFolderTokens": "tokens",
"outputFormatCss": "ts",
"outputFormatDescription": "md",
"outputFormatElements": "tsx",
"outputFormatGraphics": "svg",
"outputFormatStorybook": "js",
"outputFormatTokens": "ts",
"outputGraphicElements": false,
"outputGraphicElementsMap": false,
"outputScaleGraphics": 1,
"outputDataTypeToken": null,
"overwrite": {
"css": false,
"description": false,
"graphic": false,
"react": false,
"storybook": false,
"styled": false
},
"recompileLocal": false,
"remSize": 16,
"skipFileGeneration": {
"forceUpdate": true,
"skipCss": false,
"skipDescription": false,
"skipReact": false,
"skipStorybook": false,
"skipStyled": false
},
"spacingUnit": "rem",
"syncElements": false,
"syncGraphics": false,
"syncTokens": true,
"templates": {
"templatePathGraphic": "templates/graphic",
"templatePathReact": "templates/react",
"templatePathStorybook": "templates/story",
"templatePathStyled": "templates/styled"
},
"token": "",
"unitlessPrecision": 2,
"url": "",
"usePostscriptFontNames": false,
"versionName": null
};
Run these in your command line environment of choice.
figmagic [--debug | -d]
Default is false.
figmagic [--fontUnit | -fu] [rem|em|px]
Default is rem.
figmagic [--letterSpacingUnit | -lsu] [em|px]
Default is em.
figmagic [--opacitiesUnit | -ou] [float|percent]
Default is float.
figmagic [--figmaData | -file] [filename]
Default is figma.json.
figmagic [--figmagicFolder | -base] [folder]
Default is .figmagic.
figmagic [--outputFolderElements | -elements] [folder]
Default is elements.
figmagic [--outputFolderGraphics | -graphics] [folder]
Default is graphics.
figmagic [--outputFolderTokens | -tokens] [folder]
Default is tokens.
figmagic [--outputFormatCss | -fc] [ts|mjs|js]
Default is ts.
figmagic [--outputFormatDesc | -fd] [md|txt]
Default is md.
figmagic [--outputFormatElements | -fe] [tsx|jsx|mjs|js]
Default is tsx.
figmagic [--outputFormatGraphics | -fg] [svg|png]
Default is svg.
figmagic [--outputFormatStorybook | -fs] [ts|js|mdx]
Default is js.
figmagic [--outputFormatTokens | -ft] [ts|mjs|js|json]
Default is ts.
figmagic [--outputGraphicElements | -oge]
Default is false.
figmagic [--outputGraphicElementsMap | -ogm]
Default is false.
figmagic [--outputScaleGraphics | -scale] [number]
Default is 1. Note that from the CLI you must specify the scale size like 3x (or anything at the end, as long as it includes letter at the end). This only applies to CLI configuration, and does not apply to other types of config, such as through figmagic.json or .figmagicrc.
figmagic [--outputDataTypeToken | -tokentype] [null | enum]
Default is null. Currently the only valid non-null value is enum.
This is not currently possible to adjust from the CLI.
figmagic [--recompileLocal | -local]
Default is null, and will then be taken from local .env file if not explicitly passed in through the CLI.
figmagic [--remSize | -rem] [number]
Default is 16. Note that from the CLI you must specify the REM size like 16p (or anything at the end, as long as it includes letter at the end). This only applies to CLI configuration, and does not apply to other types of config, such as through figmagic.json or .figmagicrc.
figmagic [--forceUpdate | -force]
Default is true. Forces all elements and file types to be regenerated.
figmagic [--skipCss | -nocss]
Default is false. Skip creating CSS file when syncing elements.
figmagic [--skipDescription | -nodesc]
Default is false. Skip creating Markdown file when syncing elements.
figmagic [--skipReact | -noreact]
Default is false. Skip creating React file when syncing elements.
figmagic [--skipStorybook | -nostory]
Default is false. Skip creating Storybook file when syncing elements.
figmagic [--skipStyled | -nostyled]
Default is false. Skip creating Styled Components file when syncing elements.
figmagic [--spacingUnit | -s] [rem|em|px]
Default is rem.
figmagic [--syncElements | -se]
Default is false, and will then be taken from local .env file if not explicitly passed in through the CLI.
Use this when you want to sync elements in your "Elements" page in Figma.
figmagic [--syncGraphics | -sg]
Default is false, and will then be taken from local .env file if not explicitly passed in through the CLI.
Use this when you want to sync graphics in your "Graphics" page in Figma. Use the RC configuration file to pass in options. Default format will be SVG.
figmagic [--syncTokens | -st]
Default is true, and will then be taken from local .env file if not explicitly passed in through the CLI.
Use this when you want to sync tokens in your "Design tokens" page in Figma. Use the RC configuration file to pass in options.
figmagic [--templatePathGraphic | -tpgraphic] [path]
Default is templates/graphic.
Your local figmagic.json or .figmagicrc file must have a block with templates.templatePathGraphic that specifies a valid path, such as ./node_modules/figmagic/templates/graphic.
figmagic [--templatePathReact | -tpreact] [path]
Default is templates/react.
Your local figmagic.json or .figmagicrc file must have a block with templates.templatePathReact that specifies a valid path, such as ./node_modules/figmagic/templates/react.
figmagic [--templatePathStorybook | -tpstory] [path]
Default is templates/story.
Your local figmagic.json or .figmagicrc file must have a block with templates.templatePathStory that specifies a valid path, such as ./node_modules/figmagic/templates/story.
figmagic [--templatePathStyled | -tpstyled] [path]
Default is templates/styled.
Your local figmagic.json or .figmagicrc file must have a block with templates.templatePathStyled that specifies a valid path, such as ./node_modules/figmagic/templates/styled.
figmagic [--token | -t] [token]
Default is null, and will then be taken from local .env file if not explicitly passed in through the CLI.
figmagic [--tokensRelativeImportPrefix | -tip] [path]
Default is '' (effectively just blank or the same folder). Use this so CSS files can import tokens from the correct location, for example to resolve something like ../../tokens/colors.ts you would pass in ../../ and tokens would be whatever your outputFolderTokens value is.
figmagic [--url | -u] [url_id]
Default is null, and will then be taken from local .env file if not explicitly passed in through the CLI.
figmagic [--unitlessPrecision | -up] [number]
Defines the precision (decimals) for unitless values (rounded using .toFixed() internally). Default is 2.
figmagic [--usePostscriptFontNames | -ps]
Default is false, i.e. common name.
figmagic [--versionName | -v]
Default is null which will resolve to the latest version. The value you specify here is the name of the version in the Figma file's Version history.
Starting with Figmagic version 4.0, four types of generated files have customizable templates:
These four types have support for a variety of formats that differ a bit between each type.
Figmagic comes with a set of templates for several file formats. In case you want to customize these, you should respect and keep any substitution tags that exist in the original files; removing them may cause your templates to function incorrectly. For example, the React template includes a substitution tag called {{NAME_STYLED}} which will be changed to your adjusted element name with a "Styled" suffix. Removing it would make your generated code useless as-is.
The recommended way of adding and using your own templates would be to copy-paste any/all existing templates from Figmagic into your project, pointing the configuration file to your local copies, and then modifying them as needed.
The font family name, either as its common name (as picked up by Figma; spaces are removed) or its Postscript name (eg. FiraSans-Regular).
Default: Common name.
Note: In previous versions of Figmagic the Postscript font family name was used.
Typical font weight values like 200, 300 etc.
Units based on global font size (base 16px).
Default: rem units. Can be set to rem or em.
Unitless.
2 decimals numbered values by default. Precision can be configured with unitlessPrecision (see config)
RGBA colors.
Default: rem units. Can be set to rem or em.
Default: px units.
Default: em units.
Default: px units.
Typical 2 decimals numbered values between 0 and 1 like 0 or 0.65.
Can be set to percent to have them converted to % strings instead like 0% or 65%.
Default: px units.
Default: px units for three values (horizontal offset, vertical offset, blur) and RGBA for the color.
Default: numbers (whole numbers, i.e. integers).
__tests__/: Tests, structured similarly to the bin folder source code.github/: GitHub files for CI and issue template.vscode/: Visual Studio Code configurationbin/: Source codebin/contracts: Types and interfacesbin/controllers: Controllersbin/entities: Entities (DDD-style), this is where most of the logic will be containedbin/frameworks: Non-domain functionality, like string manipulation and downloading files etc.bin/usecases: Where the application "features" are orchestrated, as per Clean Architecturebuild/: ES6-compiled code (this is the code that consumers of the Figmagic binary actually use)readme/: Documentation, mostly images and screen shotstemplates/: Files that are used as templates for code generationtestdata/: Most of the tests point to stored test data which is stored in this folderindex.ts: The file that initializes and sets up everything required to run Figmagic
You are welcome to contribute to the project! Pull requests, as well as issues or plain messages, work fine. For pull requests, please refer to the contribution guidelines in CONTRIBUTING.md.
FAQs
Figmagic is the missing piece between DevOps and design: Generate design tokens, export graphics, and extract design token-driven React components from your Figma documents.
We found that figmagic demonstrated a healthy version release cadence and project activity because the last version was released less than a year ago. It has 1 open source maintainer collaborating on the project.
Did you know?
Socket for GitHub automatically highlights issues in each pull request and monitors the health of all your open source dependencies. Discover the contents of your packages and block harmful activity before you install or update your dependencies.
Security News
PyPI confirms no security flaws were exploited in the Ultralytics supply chain attack and highlights improvements for safer package publishing.
Security News
Research
The Socket Research Team breaks down a malicious wrapper package that uses obfuscation to harvest credentials and exfiltrate sensitive data.
Research
Security News
Attackers used a malicious npm package typosquatting a popular ESLint plugin to steal sensitive data, execute commands, and exploit developer systems.