hexo-enhanced-images

hexo-images

hexo-images is a plugin for Hexo static site generator that optimizes images for better website performance.

• Resizes images up to sizes that are convenient for web browsing. You don't need to share 36-megapixel photos on the web 🙃
• Compresses images to make sure it loads as fast as possible. It uses the most efficient algorithms to compress the image.
• Creates responsive images to display the most important part of the image for mobile users. While resizing it detects the most important part of the photo to crop (thank you to smartcrop-sharp).
• Creates special-sized images if needed. Special sizes for special cases 👌
• Provides tag helper to generate a responsive-oriented picture tag.
• Generates webp files in addition to the original image type.
• Converts old good GIFs to mp4 and webm.

How it works

1. Near to your .md file create folder with the same name as the .md file. Copy all required images there.

1. Run hexo generate or hexo server. The images will be processed and cached. Second run will not cause processing this image again. If image changes, the cache will be cleared and the image re-processed. This step could take a time, so be patient 😉

1. Once processing is done, the result files will be stored in special folder (/.images/) and included into the cache manifest (/.images/images.json). You should not care about the folder structure in this folder, but if you're curious it looks like this.

1. The processed files will be included into output build while running hexo generate or hexo server. To include it into the post use {% picture %} tag helper in the following way:

Some text

{% picture 1.jpg %}
{% endpicture %}

Some other text

1. Responsive-oriented <picture> tag will be generated in the final output:

<figure>
  <picture>
    <source srcset="/2014/fronttalks-2014/d5ea4373/[e-mail]" media="(max-width: 39.99em)" type="image/webp" />
    <source srcset="/2014/fronttalks-2014/d5ea4373/[e-mail]" media="(min-width: 40em)" type="image/webp" />
    <source srcset="/2014/fronttalks-2014/d5ea4373/[e-mail]" media="(max-width: 39.99em)" type="image/jpg" />
    <source srcset="/2014/fronttalks-2014/d5ea4373/[e-mail]" media="(min-width: 40em)" type="image/jpg" />
    <img src="/2014/fronttalks-2014/d5ea4373/[e-mail]" />
  </picture>
</figure>

Requirements

• Hexo: 4.x
• Node 12+

Usage

1. Install the plugin using npm:

$ npm install hexo-images --save-dev

1. For every post (or page) create the folder that has the same name as your .md file. For instance, for fronttalks-2014.md file you need to create fronttalks-2014/ folder near to .md file.

2. Put all required images into the created folder.

3. Reference image from the post by using special {% picture %} tag helper. Specify file name without folder like this:

{% picture 1.jpg %}
{% endpicture %}

1. Run website building (via hexo generate or hexo server).

2. Ensure that .images folder added to your repo. If it's ignored, image processing will start each time, which is time-consuming.

3. Check the output page and ensure that <picture> tag is generated 🎉

Configuration

To configure the plugin add images key to the Hexo config file. For example:

images:
    enable: true
    base_dir: ".images"
    manifestFileName: "images.json"
    excludeSourceImages: true
    templates:
        image: themes/theme1/layout/_tag/image.ejs
        video: themes/theme1/layout/_tag/video.ejs
    specialImages:
        - name: list_image
          frontmatter: list_image
          suffix: list
          width: 590
          height: 200

Key	Required	Default value	Description
enable	false	true	Flag to disable plugin execution.
base_dir	false	.images	Directory name to store image cache.
manifestFileName	false	images.json	File name to store image cache manifest (for more info see below).
excludeSourceImages	false	true	Whether to include initial (uncompressed) image into final output. To include it ensure that post_asset_folder option is enabled as well.
templates.image	false		Path to the template that will be generated for {% picture %} tag helper for all images (for more info see below).
templates.video	false		Path to the template that will be generated for {% picture %} tag helper for all videos (for more info see below).
specialImages	false	Empty array	Array of definitions for "special images" (for more info see below).
specialImages[].name	true		Name of special image.
specialImages[].frontmatter	true		Frontmatter key that defines image name for this special image.
specialImages[].suffix	true		Image name suffix that be appened to output file.
specialImages[].width	true		Image width in pixels.
specialImages[].height	true		Image height in pixels.

Prevent resizing

By default, if the image is wider than 640px, hexo-images generates two versions of the image either for desktop and mobile page. If you don't want to crop the image and skip generating its mobile version, you can add .noresize. suffix to the initial file name (e.g. 1.noresize.jpg instead of 1.jpg). At the same time you should reference the image by 1.jpg name via {% picture %} tag, not 1.noresize.jpg.

Special images

Special images work when you need some special size of the image for a particular purpose. For example, if you want to display some small image near to the post on the list, special images could help.

To define special image you need to add specialImages key into the Hexo config. This key contains an array of special images, so you can define more than one item.

Example:

images:
    specialImages:
        - name: list_image
          frontmatter: list_image
          suffix: list
          width: 590
          height: 200

In this example we define a special image called list_image which is sized as 590px×200px. Now, during the build hexo-images will check list_image key in the post's frontmatter to determine which file should be processed as a special image. So we need to define it in the post's file:

---
title: Test post
list_image: 1.jpg
---

Post text

Since it's defined, an additional 1.list.jpg file will be generated. To access it, you can use resolve_image tag helper to access the image (for more info see below):

const imageMetadata = resolve_image(item.list_image, item)

Picture tag plugin (and its customization)

Picture tag plugin allows you to insert an image in the post without a headache.

Some text

{% picture 1.jpg %}
{% endpicture %}

Some other text

It will generate HTML in the output file:

<figure>
  <picture>
    <source srcset="/d5ea4373/[e-mail]" media="(max-width: 39.99em)" type="image/webp" />
    <source srcset="/d5ea4373/[e-mail]" media="(min-width: 40em)" type="image/webp" />
    <source srcset="/d5ea4373/[e-mail]" media="(max-width: 39.99em)" type="image/jpg" />
    <source srcset="/d5ea4373/[e-mail]" media="(min-width: 40em)" type="image/jpg" />
    <img src="/d5ea4373/[e-mail]" />
  </picture>
</figure>

Optionally, you can add some caption for the image:

{% picture 1.jpg %}
My awesome image
{% endpicture %}

Which will be transformed into:

<figure>
  <picture>
    <source srcset="/d5ea4373/[e-mail]" media="(max-width: 39.99em)" type="image/webp" />
    <source srcset="/d5ea4373/[e-mail]" media="(min-width: 40em)" type="image/webp" />
    <source srcset="/d5ea4373/[e-mail]" media="(max-width: 39.99em)" type="image/jpg" />
    <source srcset="/d5ea4373/[e-mail]" media="(min-width: 40em)" type="image/jpg" />
    <img src="/d5ea4373/[e-mail]" />
  </picture>
  <figcaption>My awesome image</figcaption>
</figure>

If you are not happy with HTML layout that generated by the {% picture %} tag you can customize it with a template.

To do that specify templates key in the configuration file:

images:
    templates:
        image: themes/theme1/layout/_tag/image.ejs
        video: themes/theme1/layout/_tag/video.ejs

You can use default templates as a reference to create your own markup.

Tag helpers

resolve_image

resolve_image tag helper allows you to get information about the image from the Hexo template.

resolve_image(<image name>, <post>)

• <image name> is a file name of the image that you want to display.
• <post> is an optional parameter to define the post or page which owns the image. It's useful when you try to display the image in the list or on the main page. In this case you should pass the post as a second parameter.

Manifest

Normally, you shouldn't care about the manifest structure. But if you're curious, the manifest is a JSON file that contains key-value collection of processed files. The key is a relative path to the image. The value is information about the processed file.

Here is an example:

{
  "_posts/2014/fronttalks-2014/1.jpg": {
    "size": 193539,
    "hash": "d5ea43732c6e51e6d1e0d1666b23ac96",
    "relatedPath": "_posts/2014/fronttalks-2014.md",
    "dimensions": {
      "1x": {
        "w": 640,
        "h": 683,
        "media": "(max-width: 39.99em)"
      },
      "2x": {
        "w": 1024,
        "h": 683,
        "media": "(min-width: 40em)"
      }
    },
    "originalType": "jpg",
    "files": {
      "webp": {
        "1x": "d5ea4373/[e-mail]",
        "2x": "d5ea4373/[e-mail]"
      },
      "default": "d5ea4373/[e-mail]",
      "jpg": {
        "1x": "d5ea4373/[e-mail]",
        "2x": "d5ea4373/[e-mail]"
      }
    }
  }
}

In page template you can also access images property that will contain the part of the manifest that related to the current page.