import-map-deployer
Advanced tools
The import-map-deployer is a backend service that updates import map json files. When using import-map-deployer, a frontend deployment is completed in two steps:
curl or httpie) to modify an existing import map to point to the new file.These two steps are often performed during a CI process, to automate deployments of frontend code.
The alternative to the import-map-deployer is to pull down the import map file, modify it, and reupload it during your CI process. That alternative has one problem: it doesn't properly handle concurrency. If two deployments occur in separate CI pipelines at the same time, it is possible they pull down the import map at the same time, modify it, and reupload. In that case, there is a race condition where the "last reupload wins," overwriting the deployment that the first reupload did.
When you have a single import map file and multiple services' deployment process modifies that import map, there is a (small) chance for a race condition where two deployments attempt to modify the import map at the same time. This could result in a CI pipeline indicating that it successfully deployed the frontend module, even though the deployment was overwritten with a stale version.
import-map-deployer ensures that all URLs in the import map are reachable, to avoid bad deployments.
import-map-deployer's urlSafeList configuration option prevents your import map from ever referencing any domains not fully trusted by your organization, even if the security credentials to import-map-deployer are compromised.
The import-map-deployer must have read / write access to the CDN / bucket that is storing your production import map. It exposes a web server that allows for modifying the state of your production application. It is password protected with HTTP basic authentication.
The following security constraints are highly recommended to secure the import-map-deployer
urlSafeList with a list of URL prefixes that are trusted in your import map. Any attempts to modify the state of production so that your import map downloads from other URLs will be rejected.If you are not comfortable with running the import-map-deployer at all, you do not have to. Instead, give read/write access to your CI runners for modifying your import map file. Perform all import map modifications the import map inside of your CI process.
If you do this, decide whether you care about the deployment race condition scenario described in the Why does this exist? section. If you are willing to live with that unlikely race condition, see these examples (1, 2) for some example CI commands.
Note that several object stores (notably Google Cloud Storage and Azure Storage) allow for optimistic concurrency when uploading files. By correctly sending pre-condition headers on those services, your CI process can correctly fail and/or retry in the event of a race condition. For further reading, see Azure's docs or Google Cloud's docs on concurrency.
If you do want to address the deployment race condition without using import-map-deployer, we'd love to hear what you come up with. Consider leaving a PR to these docs that explain what you did!
This github repository shows an example of setting up your own Docker image that can be configured specifically for your organization.
import-map-deployer is available on DockerHub as singlespa/import-map-deployer. If you want to run just the single container,
you can run docker-compose up from the project root. When running via docker-compose, it will mount a volume in the project root's directory,
expecting a config.json file to be present.
FROM singlespa/import-map-deployer:<version-tag>
ENV HTTP_USERNAME= HTTP_PASSWORD=
COPY conf.js /www/
CMD ["yarn", "start", "conf.js"]
To run the import-map-deployer in Node, run the following command:
npx import-map-deployer config.json
It is available as import-map-deployer on npm.
The default web server port is 5000. To run web server with a custom port, se the PORT ENV variable.
$ PORT=8080 npx import-map-deployer config.json
The import-map-deployer expects a configuration file to be present so it (1) can password protect deployments, and (2) knows where and how to download and update the "live" import map.
If no configuration file is present, import-map-deployer defaults to using the filesystem to host the manifest file, which is called sofe-manifest.json and created in the current working directory. If username and password are included, http basic auth will be required. If username and password is not provided, no http auth will be needed.
Here are the properties available in the config file:
urlSafeList (optional, but highly recommended): An array of strings and/or functions that indicate which URLs are trusted when updating the import map. A string value is treated as a URL prefix - for example https://unpkg.com/. A function value is called with a URL object and must return a truthy value when the URL is trusted. Any attempt to update the import map to include an untrusted URL will be rejected. If you omit urlSafeList, all URLs are considered trusted (not recommended).packagesViaTrailingSlashes (optional, defaults to true): A boolean that indicates whether to turn off the automatic generation of trailing slash package records on PATCH service requests. For more information and examples visit standard guideline.manifestFormat (optional, defaults to "importmap"): A string that is either "importmap" or "sofe". Sofe is for legacy use.
interacting with an import map or a sofe manifest.locations (required): An object specifying one or more "locations" (or "environments") for which you want the import-map-deployer to control the import map. The special default
location is what will be used when no query parameter ?env= is provided in calls to the import-map-deployer. If no default is provided, the import-map-deployer will create
a local file called import-map.json that will be used as the import map. The keys in the locations object are the names of environments, and the values are
strings that indicate how the import-map-deployer should interact with the import map for that environment. For more information on the possible string values for locations, see the
Built-in IO Methods section.username (optional): The username for HTTP auth when calling the import-map-deployer. If username and password are omitted, anyone can update the import map without authenticating. This
username is not related to authenticating with S3/Digital Ocean/Other, but rather is the username your CI process will use in its HTTP request to the import-map-deployer.password (optional): The password for HTTP auth when calling the import-map-deployer. If username and password are omitted, anyone can update the import map without authenticating. This
password is not related to authenticating with S3/Digital Ocean/Other, but rather is the password your CI process will use in its HTTP request to the import-map-deployer.port (optional): The port to run the import-map-deployer on. Defaults to 5000.region (optional): The AWS region to be used when retrieving and updating the import map.
This can also be specified via the AWS_DEFAULT_REGION environment variable, which is the preferred method.s3.putObject (optional): The s3.putObject is an object that is merged with the default putObject parameters. This can contain and override any of of the valid request options, such as ACL, encoding, SSE, etc. The sdk options can be found here.s3Endpoint (optional): The url for aws-sdk to call when interacting with S3. Defaults to AWS' default domain, but can be configured for
Digital Ocean Spaces or other S3-compatible APIs.readManifest(env) (optional): A javascript function that will be called to read the import map. One argument is provided, a string env indicating
which location to read from. This allows you to implement your own way of reading the import map. The function must return
a Promise that resolves with the import map as a string. Since javascript functions are not part of JSON, this option is only available if you provide a config.js file (instead
of config.json).writeManifest(importMapAsString, env) (optional): A javascript function that will be called to write the import map. Two arguments are provided,
the first being the import map as a string to be written, and the second is the string env that should be updated. This allows you to implement your
own way of writing the import map. The function must return a Promise that resolves with the import map as an object. Since javascript functions are
not part of JSON, this option is only available if you provide a config.js file (instead of config.json).cacheControl (optional): Cache-control header that will be set on the import map file when the import-map-deployer is called. Defaults to public, must-revalidate, max-age=0.alphabetical (optional, defaults to false): A boolean that indicates whether to sort the import-map alphabetically by service/key/name.The below configuration file will set up the import-map-deployer to do the following:
s3:// prefix.default, prod, and test.{
"urlSafeList": ["https://unpkg.com/", "https://my-organization-cdn.com/"],
"username": "admin",
"password": "1234",
"manifestFormat": "importmap|sofe",
"locations": {
"default": "import-map.json",
"prod": "s3://cdn.canopytax.com/import-map.json",
"test": "import-map-test.json"
}
}
Example config.js
// config.js
module.exports = {
// The username that must be provided via HTTP auth when calling the import-map-deployer
username: "admin",
// The password that must be provided via HTTP auth when calling the import-map-deployer
password: "1234",
// The type of json file that should be updated. Import-maps are two ways of defining URLs for javascript module.
manifestFormat: "importmap|sofe",
// Optional, if you are using a built-in "IO Method"
readManifest: function (env) {
return new Promise((resolve, reject) => {
const manifest = ""; //read a string from somewhere
resolve(manifest); //must resolve a string
});
},
// Optional, if you are using a built-in "IO Method"
writeManifest: function () {
return new Promise((resolve, reject) => {
//write the file....
resolve(); //you don't have to call resolve with any value
});
},
};
Basic auth credentials can be set either in the config.json file (see above) or using the following environment variables:
IMD_USERNAMEIMD_PASSWORD:information_source: Both environment variables must be set for them to take effect.
:warning: The above environment variables will override the username and password from the config file.
To build image using default settings
$ docker build .
# ...
To build image with a custom container port in the PORT ENV variable
$ docker build --container-port=8080 .
# ...
The import-map-deployer knows how to update import maps that are stored in the following ways:
If your import map json file is hosted by AWS S3, you can use the import-map-deployer to modify the import map file
by specifying in your config s3:// in the locations config object.
The format of the string is s3://bucket-name/file-name.json
import-map-deployer relies on the AWS CLI environment variables for authentication with S3.
config.json:
{
"manifestFormat": "importmap",
"locations": {
"prod": "s3://mycdn.com/import-map.json"
}
}
If your import map json file is hosted by Digital Ocean Spaces, you can use the import-map-deployer to modify the import map file
by specifying in your config spaces:// in the locations config object.
The format of the string is spaces://bucket-name.digital-ocean-domain-stuff.com/file-name.json. Note that the name of the Bucket
is everything after spaces:// and before the first . character.
Since the API Digital Ocean Spaces is compatible with the AWS S3 API, import-map-deployer uses aws-sdk to communicate with Digital Ocean Spaces. As such,
all options that can be passed for AWS S3 also are applied to Digital Ocean Spaces. You need to provide
AWS CLI environment variables for authentication with Digital Ocean Spaces, since
import-map-deployer is using aws-sdk to communicate with Digital Ocean.
Instead of an AWS region, you should provide an s3Endpoint config value that points to a Digital Ocean region.
config.json:
{
"manifestFormat": "importmap",
"s3Endpoint": "https://nyc3.digitaloceanspaces.com",
"locations": {
"prod": "spaces://mycdn.com/import-map.json"
}
}
Minio also has an s3 compatible API, so you can use a process similar to digital ocean spaces. You would use the import-map-deployer to modify the import map file
by specifying in your config spaces:// in the locations config object.
Instead of an AWS region, you should provide an s3Endpoint config value that points to your root domain.
config.json:
{
"manifestFormat": "importmaps",
"s3Endpoint": "https://<selfhosted.domain>",
"locations": {
"default": "spaces://minio.<selfhosted.domain>/import-map.json"
}
}
Note, that you must have environment variables AZURE_STORAGE_ACCOUNT and AZURE_STORAGE_ACCESS_KEY, or AZURE_STORAGE_CONNECTION_STRING defined for authentication.
If you wish to provide custom authentication keys for specific environments you can provide it also via the keys azureConnectionString, azureAccount or azureAccessKey.
Its not recommended to put authentication keys in code. Always provide them via environment variables.
config.js:
module.exports = {
manifestFormat: "importmap",
locations: {
prod: {
azureContainer: "static",
azureBlob: "importmap.json",
azureConnectionString: process.env.AZURE_STORAGE_ACCOUNT_PROD, // optional
azureAccount: process.env.AZURE_STORAGE_ACCOUNT_PROD, // optional
azureAccessKey: process.env.AZURE_STORAGE_ACCOUNT_PROD, // optional
},
},
};
Note that you must have the GOOGLE_APPLICATION_CREDENTIALS environment variable set for authentication.
config.json:
{
"manifestFormat": "importmap",
"locations": {
"prod": "gs://name-of-bucket/importmap.json"
}
}
If you'd like to store the import map locally on the file system, provide the name of a file in your locations instead.
{
"manifestFormat": "importmap",
"locations": {
"prod": "prod-import-map.json"
}
}
This service exposes the following endpoints
An endpoint for health checks. It will return an HTTP 200 with a textual response body saying that everything is okay. You may also call / as a health check endpoint.
You can retrieve the list of environments (locations) a GET request at /environments
Example using HTTPie:
http :5000/environments
Example using cURL:
curl localhost:5000/environments
Response:
{
"environments": [
{
"name": "default",
"aliases": ["prod"],
"isDefault": true
},
{
"name": "prod",
"aliases": ["default"],
"isDefault": true
},
{
"name": "staging",
"aliases": [],
"isDefault": false
}
]
}
You can request the importmap.json file by making a GET request.
Example using HTTPie:
http :5000/import-map.json\?env=prod
Example using cURL:
curl localhost:5000/import-map.json\?env=prod
You can modify the import map by making a PATCH request. The import map should be sent in the HTTP request body and will be merged into the import map controlled by import-map-deployer.
If you have an import map called importmap.json, here is how you can merge it into the import map deployer's import map.
Note that the skip_url_check query param indicates that the import-map-deployer will update the import map even if it is not able to reach it via a network request.
Example using HTTPie:
http PATCH :5000/import-map.json\?env=prod < importmap.json
# Don't check whether the URLs in the import map are publicly reachable
http PATCH :5000/import-map.json\?env=prod\&skip_url_check < importmap.json
Example using cURL:
curl -X PATCH localhost:5000/import-map.json\?env=prod --data "@import-map.json" -H "Accept: application/json" -H "Content-Type: application/json"
# Don't check whether the URLs in the import map are publicly reachable
curl -X PATCH localhost:5000/import-map.json\?env=prod\&skip_url_check --data "@import-map.json" -H "Accept: application/json" -H "Content-Type: application/json"
You can PATCH services to add or update a service, the following json body is expected:
Note that the skip_url_check query param indicates that the import-map-deployer will update the import map even if it is not able to reach it via a network request.
Note that the packageDirLevel query param indicates the number of directories to remove when determining the root directory for the package. The default is 1. Note that this option only takes effect if packagesViaTrailingSlashes is set to true.
Body:
integrity field is optional
{
"service": "my-service",
"url": "http://example.com/path/to/my-service.js",
"integrity": "sha256-example"
}
Response:
{
"imports": {
"my-service": "http://example.com/path/to/my-service.js",
"my-service/": "http://example.com/path/to/"
},
"integrity": {
"http://example.com/path/to/my-service.js": "sha256-example"
}
}
Example using HTTPie:
http PATCH :5000/services\?env=stage service=my-service url=http://example.com/my-service.js
# Don't check whether the URL in the request is publicly reachable
http PATCH :5000/services\?env=stage\&skip_url_check service=my-service url=http://example.com/my-service.js
Example using cURL:
curl -d '{ "service":"my-service","url":"http://example.com/my-service.js" }' -X PATCH localhost:5000/services\?env=beta -H "Accept: application/json" -H "Content-Type: application/json"
# Don't check whether the URL in the request is publicly reachable
curl -d '{ "service":"my-service","url":"http://example.com/my-service.js" }' -X PATCH localhost:5000/services\?env=beta\&skip_url_check -H "Accept: application/json" -H "Content-Type: application/json"
You can remove a service by sending a DELETE with the service name. No request body needs to be sent. Example:
DELETE /services/my-service
Example using HTTPie:
http DELETE :5000/services/my-service
Example using cURL:
curl -X DELETE localhost:5000/services/my-service
This project uses URI encoding: encode URI. If you have any service with special chars like @, /, etc... you need to use It's corresponding UTF-8 encoding character.
Imagine you have this service name in your import-map.json @company/my-service. You have to replace those characters to utf-8 encoded byte: See detailed list utf8 encode
curl -X DELETE localhost:5000/services/%40company%2Fmy-service
FAQs
a manifest deployer for sofe
The npm package import-map-deployer receives a total of 64 weekly downloads. As such, import-map-deployer popularity was classified as not popular.
We found that import-map-deployer demonstrated a healthy version release cadence and project activity because the last version was released less than a year ago. It has 0 open source maintainers collaborating on the project.
Did you know?
Socket for GitHub automatically highlights issues in each pull request and monitors the health of all your open source dependencies. Discover the contents of your packages and block harmful activity before you install or update your dependencies.
Security News
Research
Socket researchers have discovered malicious npm packages targeting crypto developers, stealing credentials and wallet data using spyware delivered through typosquats of popular cryptographic libraries.
Security News
Socket's package search now displays weekly downloads for npm packages, helping developers quickly assess popularity and make more informed decisions.
Security News
A Stanford study reveals 9.5% of engineers contribute almost nothing, costing tech $90B annually, with remote work fueling the rise of "ghost engineers."