Socket
Socket
Sign inDemoInstall

whk

Package Overview
Dependencies
76
Maintainers
1
Versions
16
Alerts
File Explorer

Advanced tools

Install Socket

Detect and block malicious and high-risk dependencies

Install

whk

Modern HTTP/TLS benchmarking tool


Version published
Maintainers
1
Weekly downloads
61
decreased by-11.59%

Weekly downloads

Readme

Source

whk - A modern HTTP/TLS benchmarking tool

whk or "whack" is a modern http benchmarking and speed testing tool for http and tls websites. whk is useful for getting reliable timing metrics for a website and to know where the majority of your problems may be in the requests. whk is not useful for load tests and not recommended for that purpose.

Installation

$ npm install -g whk

Usage

$ whk https://www.somewebsite.com -a 100 -c 10

This will run 100 tests, 10 concurrently against www.somewebsite.com

Output

Running 100 tests @ https://www.somewebsite.com
Concurrently running 10 tests

 Stat      Avg        Min        Max        +/- σ   +/- ci(95%)   Request% 
 DNS       2.61ms     949.51μs   23.35ms    ±0      ±0.51ms       2.28%    
 Connect   25.33ms    22.45ms    66.2ms     ±0      ±1.17ms       22.1%    
 TLS       29.71ms    22.88ms    65.33ms    ±0.01   ±2.33ms       25.91%   
 TTFB      56.69ms    43.59ms    135.01ms   ±0.01   ±3.39ms       49.45%   
 TTLB      262.72μs   103.26μs   2.15ms     ±0      ±0.05ms       0.22%    
 Total     114.64ms   92.91ms    184.32ms   ±0.02   ±4.81ms       100%     

 100 requests in 1.22s  (15.82KB received)
 Requests/sec: 81.92
 Transfer/sec: 12.96KB

Warning: you may need to increase the amount of tests (-a) as it
has too much variance to be reliable, recommended size: 187

Measurements

  • DNS is the amount of time taken to lookup the hostname (if applicable, this will be 0 if you specify an ip). This is useful for seeing how DNS resolver affects the time to make a request.
  • Connect is the amount of time that measures the time taken to establish a TCP/IP connection, this begins after the DNS lookup but before the TLS negotiations. This is useful in measuring the network latency of a minimal set of packets.
  • TLS if the connection is over https, this is the amount of time the TLS negotation and handshake took, note this does not use TLS session renegotation. This is useful in comparing different ciphers, TLS verisons, and implementations affect on the performance.
  • TTFB is time to first byte, it's the amount of time from when the request finishes writing, and when the server returns the first byte of the response. This is useful in measuring time taken by the server to process a request (but not the bandwidth to send the request).
  • TTLB is the time to last byte, iths the amount of time from when the first byte was received to when the last byte was received, including http headers. This is useful in measuring the bandwidth speed or content sizes affect on a system. Note that no session use is used to get an accurate measurement.
  • Total is the total time from when the request began to the socket being closed (including any overheads).

Analysis Columns

  • Avg is the average time for the specific measure (the mean)
  • Min is the minimum time found in the sample set
  • Max is the maximum time found in the sample set
  • +/- σ is the standard sample deviation for the set. If you know math it can be useful.
  • +/- ci(95%) is the 95% confidence level. 95% of the values in any future sampling with probably fall inbetween the average value +/- this number. E.g., if the average is 2 and the ci(95%) is 0.5 then there's a 95% probability that any sample will be between 1.5 and 2.5.
  • Request% represents on average percent of time spent in each measurement

Command Line Options

  -a, --amount      The amount of samples to take.
  -c, --concurrent  Maximum amount of samples to allow at once
  -X                The method to use for the requests
  -H                Add headers to the request
  -d, --data        The data to include in the body of the request
  --keep-alive      Whether to keep alive socket connections
  --no-delay        Whether to buffer read and write data (TCP_NO_DELAY)
  --insecure, -k    Whether to allow insecure (bad TLS certificate/mismatch hostname) connections.    
  --json            Print data out in JSON format. Note: time is expressed as an array [s, ns] (see process.hrtime)
  --help            Show help

FAQs

Last updated on 20 Jun 2018

Did you know?

Socket for GitHub automatically highlights issues in each pull request and monitors the health of all your open source dependencies. Discover the contents of your packages and block harmful activity before you install or update your dependencies.

Install

Related posts

SocketSocket SOC 2 Logo

Product

  • Package Alerts
  • Integrations
  • Docs
  • Pricing
  • FAQ
  • Roadmap

Stay in touch

Get open source security insights delivered straight into your inbox.


  • Terms
  • Privacy
  • Security

Made with ⚡️ by Socket Inc