Content Management System

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers • Templates • Barcodes gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. In particular, languages that require more than one code page such as Chinese, Japanese, and Arabic are not currently supported. This is explained in issue 109. However, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test ./..." is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory. The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. The draw2d package (https://github.com/llgcode/draw2d) is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the `contrib` directory. Here are guidelines for making submissions. Your change should • be compatible with the MIT License • be properly documented • be formatted with `go fmt` • include an example in fpdf_test.go if appropriate • conform to the standards of golint (https://github.com/golang/lint) and go vet (https://godoc.org/golang.org/x/tools/cmd/vet), that is, `golint .` and `go vet .` should not generate any warnings • not diminish test coverage (https://blog.golang.org/cover) Pull requests (https://help.github.com/articles/using-pull-requests/) work nicely as a means of contributing your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package's code and documentation are closely derived from the FPDF library (http://www.fpdf.org/) created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Bruno Michel has provided valuable assistance with the code. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool. This example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers • Templates • Barcodes gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. In particular, languages that require more than one code page such as Chinese, Japanese, and Arabic are not currently supported. This is explained in issue 109. However, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test ./..." is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory. The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. The draw2d package (https://github.com/llgcode/draw2d) is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the `contrib` directory. Here are guidelines for making submissions. Your change should • be compatible with the MIT License • be properly documented • be formatted with `go fmt` • include an example in fpdf_test.go if appropriate • conform to the standards of golint (https://github.com/golang/lint) and go vet (https://godoc.org/golang.org/x/tools/cmd/vet), that is, `golint .` and `go vet .` should not generate any warnings • not diminish test coverage (https://blog.golang.org/cover) Pull requests (https://help.github.com/articles/using-pull-requests/) work nicely as a means of contributing your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package's code and documentation are closely derived from the FPDF library (http://www.fpdf.org/) created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Bruno Michel has provided valuable assistance with the code. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool. This example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers • Templates • Barcodes gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. In particular, languages that require more than one code page such as Chinese, Japanese, and Arabic are not currently supported. This is explained in issue 109. However, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test ./..." is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory. The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. The draw2d package (https://github.com/llgcode/draw2d) is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the `contrib` directory. Here are guidelines for making submissions. Your change should • be compatible with the MIT License • be properly documented • be formatted with `go fmt` • include an example in fpdf_test.go if appropriate • conform to the standards of golint (https://github.com/golang/lint) and go vet (https://godoc.org/golang.org/x/tools/cmd/vet), that is, `golint .` and `go vet .` should not generate any warnings • not diminish test coverage (https://blog.golang.org/cover) Pull requests (https://help.github.com/articles/using-pull-requests/) work nicely as a means of contributing your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package's code and documentation are closely derived from the FPDF library (http://www.fpdf.org/) created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Bruno Michel has provided valuable assistance with the code. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool. This example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. However, support is provided to translate UTF-8 runes to code page encodings. This package's code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Bruno Michel has provided valuable assistance with the code. The FPDF website is http://www.fpdf.org/. gofpdf is copyrighted by Kurt Jung and is released under the MIT License. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF. See the tutorials in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test" is the production of the tutorial PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. See tutorial 7 for an example. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers • Templates • Barcodes gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. In particular, languages that require more than one code page such as Chinese, Japanese, and Arabic are not currently supported. This is explained in issue 109. However, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test ./..." is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory. The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. The draw2d package (https://github.com/llgcode/draw2d) is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the `contrib` directory. Here are guidelines for making submissions. Your change should • be compatible with the MIT License • be properly documented • be formatted with `go fmt` • include an example in fpdf_test.go if appropriate • conform to the standards of golint (https://github.com/golang/lint) and go vet (https://godoc.org/golang.org/x/tools/cmd/vet), that is, `golint .` and `go vet .` should not generate any warnings • not diminish test coverage (https://blog.golang.org/cover) Pull requests (https://help.github.com/articles/using-pull-requests/) work nicely as a means of contributing your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package's code and documentation are closely derived from the FPDF library (http://www.fpdf.org/) created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Bruno Michel has provided valuable assistance with the code. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool. This example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. - UTF-8 support - Choice of measurement unit, page format and margins - Page header and footer management - Automatic page breaks, line breaks, and text justification - Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images - Colors, gradients and alpha channel transparency - Outline bookmarks - Internal and external links - TrueType, Type1 and encoding support - Page compression - Lines, Bézier curves, arcs, and ellipses - Rotation, scaling, skewing, translation, and mirroring - Clipping - Document protection - Layers - Templates - Barcodes - Charting facility - Import PDFs as templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. gofpdf supports UTF-8 TrueType fonts and “right-to-left” languages. Note that Chinese, Japanese, and Korean characters may not be included in many general purpose fonts. For these languages, a specialized font (for example, NotoSansSC for simplified Chinese) can be used. Also, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. This repository will not be maintained, at least for some unknown duration. But it is hoped that gofpdf has a bright future in the open source world. Due to Go’s promise of compatibility, gofpdf should continue to function without modification for a longer time than would be the case with many other languages. Forks should be based on the last viable commit. Tools such as active-forks can be used to select a fork that looks promising for your needs. If a particular fork looks like it has taken the lead in attracting followers, this README will be updated to point people in that direction. The efforts of all contributors to this project have been deeply appreciated. Best wishes to all of you. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running go test ./... is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you’ll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory and if the third argument to ComparePDFFiles() in internal/example/example.go is true. (By default it is false.) The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). You should use AddUTF8Font() or AddUTF8FontFromBytes() to add a TrueType UTF-8 encoded font. Use RTL() and LTR() methods switch between “right-to-left” and “left-to-right” mode. In order to use a different non-UTF-8 TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run “go build”. This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include Google Fonts and DejaVu Fonts. The draw2d package is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the contrib directory. Here are guidelines for making submissions. Your change should - be compatible with the MIT License - be properly documented - be formatted with go fmt - include an example in fpdf_test.go if appropriate - conform to the standards of golint and go vet, that is, golint . and go vet . should not generate any warnings - not diminish test coverage Pull requests are the preferred means of accepting your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package’s code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Bruno Michel has provided valuable assistance with the code. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image’s extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Dan Meyers added support for embedded JavaScript. David Fish added a generic alias-replacement function to enable, among other things, table of contents functionality. Andy Bakun identified and corrected a problem in which the internal catalogs were not sorted stably. Paul Montag added encoding and decoding functionality for templates, including images that are embedded in templates; this allows templates to be stored independently of gofpdf. Paul also added support for page boxes used in printing PDF documents. Wojciech Matusiak added supported for word spacing. Artem Korotkiy added support of UTF-8 fonts. Dave Barnes added support for imported objects and templates. Brigham Thompson added support for rounded rectangles. Joe Westcott added underline functionality and optimized image storage. Benoit KUGLER contributed support for rectangles with corners of unequal radius, modification times, and for file attachments and annotations. - Remove all legacy code page font support; use UTF-8 exclusively - Improve test coverage as reported by the coverage tool. Example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package ora implements an Oracle database driver. ### Golang Oracle Database Driver ### #### TL;DR; just use it #### Call stored procedure with OUT parameters: An Oracle database may be accessed through the database/sql(http://golang.org/pkg/database/sql) package or through the ora package directly. database/sql offers connection pooling, thread safety, a consistent API to multiple database technologies and a common set of Go types. The ora package offers additional features including pointers, slices, nullable types, numerics of various sizes, Oracle-specific types, Go return type configuration, and Oracle abstractions such as environment, server and session. The ora package is written with the Oracle Call Interface (OCI) C-language libraries provided by Oracle. The OCI libraries are a standard for client application communication and driver communication with Oracle databases. The ora package has been verified to work with: * Oracle Standard 11g (11.2.0.4.0), Linux x86_64 (RHEL6) * Oracle Enterprise 12c (12.1.0.1.0), Windows 8.1 and AMD64. --- * [Installation](https://github.com/rana/ora#installation) * [Data Types](https://github.com/rana/ora#data-types) * [SQL Placeholder Syntax](https://github.com/rana/ora#sql-placeholder-syntax) * [Working With The Sql Package](https://github.com/rana/ora#working-with-the-sql-package) * [Working With The Oracle Package Directly](https://github.com/rana/ora#working-with-the-oracle-package-directly) * [Logging](https://github.com/rana/ora#logging) * [Test Database Setup](https://github.com/rana/ora#test-database-setup) * [Limitations](https://github.com/rana/ora#limitations) * [License](https://github.com/rana/ora#license) * [API Reference](http://godoc.org/github.com/rana/ora#pkg-index) * [Examples](./examples) --- Minimum requirements are Go 1.3 with CGO enabled, a GCC C compiler, and Oracle 11g (11.2.0.4.0) or Oracle Instant Client (11.2.0.4.0). Install Oracle or Oracle Instant Client. Copy the [oci8.pc](contrib/oci8.pc) from the `contrib` folder (or the one for your system, maybe tailored to your specific locations) to a folder in `$PKG_CONFIG_PATH` or a system folder, such as The ora package has no external Go dependencies and is available on GitHub and gopkg.in: The ora package supports all built-in Oracle data types. The supported Oracle built-in data types are NUMBER, BINARY_DOUBLE, BINARY_FLOAT, FLOAT, DATE, TIMESTAMP, TIMESTAMP WITH TIME ZONE, TIMESTAMP WITH LOCAL TIME ZONE, INTERVAL YEAR TO MONTH, INTERVAL DAY TO SECOND, CHAR, NCHAR, VARCHAR, VARCHAR2, NVARCHAR2, LONG, CLOB, NCLOB, BLOB, LONG RAW, RAW, ROWID and BFILE. SYS_REFCURSOR is also supported. Oracle does not provide a built-in boolean type. Oracle provides a single-byte character type. A common practice is to define two single-byte characters which represent true and false. The ora package adopts this approach. The oracle package associates a Go bool value to a Go rune and sends and receives the rune to a CHAR(1 BYTE) column or CHAR(1 CHAR) column. The default false rune is zero '0'. The default true rune is one '1'. The bool rune association may be configured or disabled when directly using the ora package but not with the database/sql package. Within a SQL string a placeholder may be specified to indicate where a Go variable is placed. The SQL placeholder is an Oracle identifier, from 1 to 30 characters, prefixed with a colon (:). For example: Placeholders within a SQL statement are bound by position. The actual name is not used by the ora package driver e.g., placeholder names :c1, :1, or :xyz are treated equally. The `database/sql` package provides a LastInsertId method to return the last inserted row's id. Oracle does not provide such functionality, but if you append `... RETURNING col /*LastInsertId*/` to your SQL, then it will be presented as LastInsertId. Note that you have to mark with a `/*LastInsertId*/` (case insensitive) your `RETURNING` part, to allow ora to return the last column as `LastInsertId()`. That column must fit in `int64`, though! You may access an Oracle database through the database/sql package. The database/sql package offers a consistent API across different databases, connection pooling, thread safety and a set of common Go types. database/sql makes working with Oracle straight-forward. The ora package implements interfaces in the database/sql/driver package enabling database/sql to communicate with an Oracle database. Using database/sql ensures you never have to call the ora package directly. When using database/sql, the mapping between Go types and Oracle types may be changed slightly. The database/sql package has strict expectations on Go return types. The Go-to-Oracle type mapping for database/sql is: The "ora" driver is automatically registered for use with sql.Open, but you can call ora.SetCfg to set the used configuration options including statement configuration and Rset configuration. When configuring the driver for use with database/sql, keep in mind that database/sql has strict Go type-to-Oracle type mapping expectations. The ora package allows programming with pointers, slices, nullable types, numerics of various sizes, Oracle-specific types, Go return type configuration, and Oracle abstractions such as environment, server and session. When working with the ora package directly, the API is slightly different than database/sql. When using the ora package directly, the mapping between Go types and Oracle types may be changed. The Go-to-Oracle type mapping for the ora package is: An example of using the ora package directly: Pointers may be used to capture out-bound values from a SQL statement such as an insert or stored procedure call. For example, a numeric pointer captures an identity value: A string pointer captures an out parameter from a stored procedure: Slices may be used to insert multiple records with a single insert statement: The ora package provides nullable Go types to support DML operations such as insert and select. The nullable Go types provided by the ora package are Int64, Int32, Int16, Int8, Uint64, Uint32, Uint16, Uint8, Float64, Float32, Time, IntervalYM, IntervalDS, String, Bool, Binary and Bfile. For example, you may insert nullable Strings and select nullable Strings: The `Stmt.Prep` method is variadic accepting zero or more `GoColumnType` which define a Go return type for a select-list column. For example, a Prep call can be configured to return an int64 and a nullable Int64 from the same column: Go numerics of various sizes are supported in DML operations. The ora package supports int64, int32, int16, int8, uint64, uint32, uint16, uint8, float64 and float32. For example, you may insert a uint16 and select numerics of various sizes: If a non-nullable type is defined for a nullable column returning null, the Go type's zero value is returned. GoColumnTypes defined by the ora package are: When Stmt.Prep doesn't receive a GoColumnType, or receives an incorrect GoColumnType, the default value defined in RsetCfg is used. EnvCfg, SrvCfg, SesCfg, StmtCfg and RsetCfg are the main configuration structs. EnvCfg configures aspects of an Env. SrvCfg configures aspects of a Srv. SesCfg configures aspects of a Ses. StmtCfg configures aspects of a Stmt. RsetCfg configures aspects of Rset. StmtCfg and RsetCfg have the most options to configure. RsetCfg defines the default mapping between an Oracle select-list column and a Go type. StmtCfg may be set in an EnvCfg, SrvCfg, SesCfg and StmtCfg. RsetCfg may be set in a Stmt. EnvCfg.StmtCfg, SrvCfg.StmtCfg, SesCfg.StmtCfg may optionally be specified to configure a statement. If StmtCfg isn't specified default values are applied. EnvCfg.StmtCfg, SrvCfg.StmtCfg, SesCfg.StmtCfg cascade to new descendent structs. When ora.OpenEnv() is called a specified EnvCfg is used or a default EnvCfg is created. Creating a Srv with env.OpenSrv() will use SrvCfg.StmtCfg if it is specified; otherwise, EnvCfg.StmtCfg is copied by value to SrvCfg.StmtCfg. Creating a Ses with srv.OpenSes() will use SesCfg.StmtCfg if it is specified; otherwise, SrvCfg.StmtCfg is copied by value to SesCfg.StmtCfg. Creating a Stmt with ses.Prep() will use SesCfg.StmtCfg if it is specified; otherwise, a new StmtCfg with default values is set on the Stmt. Call Stmt.Cfg() to change a Stmt's configuration. An Env may contain multiple Srv. A Srv may contain multiple Ses. A Ses may contain multiple Stmt. A Stmt may contain multiple Rset. Setting a RsetCfg on a StmtCfg does not cascade through descendent structs. Configuration of Stmt.Cfg takes effect prior to calls to Stmt.Exe and Stmt.Qry; consequently, any updates to Stmt.Cfg after a call to Stmt.Exe or Stmt.Qry are not observed. One configuration scenario may be to set a server's select statements to return nullable Go types by default: Another scenario may be to configure the runes mapped to bool values: Oracle-specific types offered by the ora package are ora.Rset, ora.IntervalYM, ora.IntervalDS, ora.Raw, ora.Lob and ora.Bfile. ora.Rset represents an Oracle SYS_REFCURSOR. ora.IntervalYM represents an Oracle INTERVAL YEAR TO MONTH. ora.IntervalDS represents an Oracle INTERVAL DAY TO SECOND. ora.Raw represents an Oracle RAW or LONG RAW. ora.Lob may represent an Oracle BLOB or Oracle CLOB. And ora.Bfile represents an Oracle BFILE. ROWID columns are returned as strings and don't have a unique Go type. #### LOBs The default for SELECTing [BC]LOB columns is a safe Bin or S, which means all the contents of the LOB is slurped into memory and returned as a []byte or string. If you want more control, you can use ora.L in Prep, Qry or `ses.SetCfg(ses.Cfg().SetBlob(ora.L))`. But keep in mind that Oracle restricts the use of LOBs: it is forbidden to do ANYTHING while reading the LOB! No another query, no exec, no close of the Rset - even *advance* to the next record in the result set is forbidden! Failing to adhere these rules results in "Invalid handle" and ORA-03127 errors. You cannot start reading another LOB till you haven't finished reading the previous LOB, not even in the same row! Failing this results in ORA-24804! For examples, see [z_lob_test.go](z_lob_test.go). #### Rset Rset is used to obtain Go values from a SQL select statement. Methods Rset.Next, Rset.NextRow, and Rset.Len are available. Fields Rset.Row, Rset.Err, Rset.Index, and Rset.ColumnNames are also available. The Next method attempts to load data from an Oracle buffer into Row, returning true when successful. When no data is available, or if an error occurs, Next returns false setting Row to nil. Any error in Next is assigned to Err. Calling Next increments Index and method Len returns the total number of rows processed. The NextRow method is convenient for returning a single row. NextRow calls Next and returns Row. ColumnNames returns the names of columns defined by the SQL select statement. Rset has two usages. Rset may be returned from Stmt.Qry when prepared with a SQL select statement: Or, *Rset may be passed to Stmt.Exe when prepared with a stored procedure accepting an OUT SYS_REFCURSOR parameter: Stored procedures with multiple OUT SYS_REFCURSOR parameters enable a single Exe call to obtain multiple Rsets: The types of values assigned to Row may be configured in StmtCfg.Rset. For configuration to take effect, assign StmtCfg.Rset prior to calling Stmt.Qry or Stmt.Exe. Rset prefetching may be controlled by StmtCfg.PrefetchRowCount and StmtCfg.PrefetchMemorySize. PrefetchRowCount works in coordination with PrefetchMemorySize. When PrefetchRowCount is set to zero only PrefetchMemorySize is used; otherwise, the minimum of PrefetchRowCount and PrefetchMemorySize is used. The default uses a PrefetchMemorySize of 134MB. Opening and closing Rsets is managed internally. Rset does not have an Open method or Close method. IntervalYM may be be inserted and selected: IntervalDS may be be inserted and selected: Transactions on an Oracle server are supported. DML statements auto-commit unless a transaction has started: Ses.PrepAndExe, Ses.PrepAndQry, Ses.Ins, Ses.Upd, and Ses.Sel are convenient one-line methods. Ses.PrepAndExe offers a convenient one-line call to Ses.Prep and Stmt.Exe. Ses.PrepAndQry offers a convenient one-line call to Ses.Prep and Stmt.Qry. Ses.Ins composes, prepares and executes a sql INSERT statement. Ses.Ins is useful when you have to create and maintain a simple INSERT statement with a long list of columns. As table columns are added and dropped over the lifetime of a table Ses.Ins is easy to read and revise. Ses.Upd composes, prepares and executes a sql UPDATE statement. Ses.Upd is useful when you have to create and maintain a simple UPDATE statement with a long list of columns. As table columns are added and dropped over the lifetime of a table Ses.Upd is easy to read and revise. Ses.Sel composes, prepares and queries a sql SELECT statement. Ses.Sel is useful when you have to create and maintain a simple SELECT statement with a long list of columns that have non-default GoColumnTypes. As table columns are added and dropped over the lifetime of a table Ses.Sel is easy to read and revise. The Ses.Ping method checks whether the client's connection to an Oracle server is valid. A call to Ping requires an open Ses. Ping will return a nil error when the connection is fine: The Srv.Version method is available to obtain the Oracle server version. A call to Version requires an open Ses: Further code examples are available in the [example file](https://github.com/rana/ora/blob/master/z_example_test.go), test files and [samples folder](https://github.com/rana/ora/tree/master/samples). The ora package provides a simple ora.Logger interface for logging. Logging is disabled by default. Specify one of three optional built-in logging packages to enable logging; or, use your own logging package. ora.Cfg().Log offers various options to enable or disable logging of specific ora driver methods. For example: To use the standard Go log package: which produces a sample log of: Messages are prefixed with 'ORA I' for information or 'ORA E' for an error. The log package is configured to write to os.Stderr by default. Use the ora/lg.Std type to configure an alternative io.Writer. To use the glog package: which produces a sample log of: To use the log15 package: which produces a sample log of: See https://github.com/rana/ora/tree/master/samples/lg15/main.go for sample code which uses the log15 package. Tests are available and require some setup. Setup varies depending on whether the Oracle server is configured as a container database or non-container database. It's simpler to setup a non-container database. An example for each setup is explained. Non-container test database setup steps: Container test database setup steps: Some helpful SQL maintenance statements: Run the tests. database/sql method Stmt.QueryRow is not supported. Go 1.6 introduced stricter cgo (call C from Go) rules, and introduced runtime checks. This is good, as the possibility of C code corrupting Go code is almost completely eliminated, but it also means a severe call overhead grow. [Sometimes](https://groups.google.com/forum/#!topic/golang-nuts/ccMkPG6Bi5k) this can be 22x the go 1.5.3 call time! So if you need performance more than correctness, start your programs with "GODEBUG=cgocheck=0" environment setting. Copyright 2017 Rana Ian, Tamás Gulácsi. All rights reserved. Use of this source code is governed by The MIT License found in the accompanying LICENSE file.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers • Templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. However, support is provided to translate UTF-8 runes to code page encodings. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test ./..." is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example exampleFilename and summary. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. The draw2d package (https://github.com/llgcode/draw2d) is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. Contributions that do not directly pertain to the core functionality of gofpdf should be placed in their own directory directly beneath the `contrib` directory. Here are guidelines for making submissions. Your change should • be compatible with the MIT License • be properly documented • include an example in fpdf_test.go if appropriate • conform to the standards of golint (https://github.com/golang/lint) and go vet (https://godoc.org/golang.org/x/tools/cmd/vet), that is, `golint .` and `go vet .` should not generate any warnings • not diminish test coverage (https://blog.golang.org/cover) Pull requests (https://help.github.com/articles/using-pull-requests/) work nicely as a means of contributing your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package's code and documentation are closely derived from the FPDF library (http://www.fpdf.org/) created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Bruno Michel has provided valuable assistance with the code. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool. This example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retreived with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers • Templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. However, support is provided to translate UTF-8 runes to code page encodings. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test ./..." is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory. The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. The draw2d package (https://github.com/llgcode/draw2d) is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the `contrib` directory. Here are guidelines for making submissions. Your change should • be compatible with the MIT License • be properly documented • be formatted with `go fmt` • include an example in fpdf_test.go if appropriate • conform to the standards of golint (https://github.com/golang/lint) and go vet (https://godoc.org/golang.org/x/tools/cmd/vet), that is, `golint .` and `go vet .` should not generate any warnings • not diminish test coverage (https://blog.golang.org/cover) Pull requests (https://help.github.com/articles/using-pull-requests/) work nicely as a means of contributing your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package's code and documentation are closely derived from the FPDF library (http://www.fpdf.org/) created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Additionally, he augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Bruno Michel has provided valuable assistance with the code. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool. This example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retreived with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. - UTF-8 support - Choice of measurement unit, page format and margins - Page header and footer management - Automatic page breaks, line breaks, and text justification - Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images - Colors, gradients and alpha channel transparency - Outline bookmarks - Internal and external links - TrueType, Type1 and encoding support - Page compression - Lines, Bézier curves, arcs, and ellipses - Rotation, scaling, skewing, translation, and mirroring - Clipping - Document protection - Layers - Templates - Barcodes - Charting facility - Import PDFs as templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. gofpdf supports UTF-8 TrueType fonts and “right-to-left” languages. Note that Chinese, Japanese, and Korean characters may not be included in many general purpose fonts. For these languages, a specialized font (for example, NotoSansSC for simplified Chinese) can be used. Also, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running go test ./... is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you’ll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory and if the third argument to ComparePDFFiles() in internal/example/example.go is true. (By default it is false.) The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). You should use AddUTF8Font() or AddUTF8FontFromBytes() to add a TrueType UTF-8 encoded font. Use RTL() and LTR() methods switch between “right-to-left” and “left-to-right” mode. In order to use a different non-UTF-8 TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run “go build”. This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include Google Fonts and DejaVu Fonts. The draw2d package is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the contrib directory. Here are guidelines for making submissions. Your change should - be compatible with the MIT License - be properly documented - be formatted with go fmt - include an example in fpdf_test.go if appropriate - conform to the standards of golint and go vet, that is, golint . and go vet . should not generate any warnings - not diminish test coverage Pull requests are the preferred means of accepting your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package’s code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Bruno Michel has provided valuable assistance with the code. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image’s extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Dan Meyers added support for embedded JavaScript. David Fish added a generic alias-replacement function to enable, among other things, table of contents functionality. Andy Bakun identified and corrected a problem in which the internal catalogs were not sorted stably. Paul Montag added encoding and decoding functionality for templates, including images that are embedded in templates; this allows templates to be stored independently of gofpdf. Paul also added support for page boxes used in printing PDF documents. Wojciech Matusiak added supported for word spacing. Artem Korotkiy added support of UTF-8 fonts. Dave Barnes added support for imported objects and templates. Brigham Thompson added support for rounded rectangles. Joe Westcott added underline functionality and optimized image storage. Benoit KUGLER contributed support for rectangles with corners of unequal radius, modification times, and for file attachments and annotations. - Remove all legacy code page font support; use UTF-8 exclusively - Improve test coverage as reported by the coverage tool. Example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers • Templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. However, support is provided to translate UTF-8 runes to code page encodings. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test ./..." is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory. The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. The draw2d package (https://github.com/llgcode/draw2d) is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the `contrib` directory. Here are guidelines for making submissions. Your change should • be compatible with the MIT License • be properly documented • be formatted with `go fmt` • include an example in fpdf_test.go if appropriate • conform to the standards of golint (https://github.com/golang/lint) and go vet (https://godoc.org/golang.org/x/tools/cmd/vet), that is, `golint .` and `go vet .` should not generate any warnings • not diminish test coverage (https://blog.golang.org/cover) Pull requests (https://help.github.com/articles/using-pull-requests/) work nicely as a means of contributing your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package's code and documentation are closely derived from the FPDF library (http://www.fpdf.org/) created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Additionally, he augmented the basic HTML functionality with aligned text. Bruno Michel has provided valuable assistance with the code. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool. This example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retreived with the output call where it can be handled by the application.

Package cslb provides transparent HTTP/HTTPS Client Side Load Balancing for Go programs. Cslb intercepts "net/http" Dial Requests and re-directs them to a preferred set of target hosts based on the load balancing configuration expressed in DNS SRV and TXT Resource Records (RRs). Only one trivial change is required to client applications to benefit from cslb which is to import this package and (if needed) enabling it for non-default http.Transport instances. Cslb processing is triggered by the presence of SRV RRs. If no SRVs exist cslb is benign which means you can deploy your application with cslb and independently activate and deactivate cslb processing for each service at any time. No server-side changes are required at all - apart for possibly dispensing with your server-side load-balancers! Importing cslb automatically enables interception for http.DefaultTransport. In this program snippet: the Dial Request made by http.Get is intercepted and processed by cslb. If the application uses its own http.Transport then cslb processing needs to be activated by calling the cslb.Enable() function, i.e.: The cslb.Enable() function replaces http.Transport.DialContext with its own intercept function. Server-side load-balancers are no panacea. They add deployment and diagnostic complexity, cost, throughput constraints and become an additional point of possible failure. Cslb can help you achieve good load-balancing and fail-over behaviour without the need for *any* server-side load-balancers. This is particularly useful in enterprise and micro-service deployments as well as smaller application deployments where configuring and managing load-balancers is a significant resource drain. Cslb can be used to load-balance across geographically dispersed targets or where "hot stand-by" systems are purposely deployed on diverse infrastructure. When cslb intercepts a http.Transport Dial Request to port 80 or port 443 it looks up SRV RRs as prescribed by RFC2782. That is, _http._tcp.$domain and _https._tcp.$domain respectively. Cslb directs the Dial Request to the highest preference target based on the SRV algorithm. If that Dial Request fails, it tries the next lower preference target until a successful connection is returned or all unique targets fail or it runs out of time. Cslb caches the SRV RRs (or their non-existence) as well as the result of Dial Requests to the SRV targets to optimize subequent intercepted calls and the selection of preferred targets. If no SRV RRs exist, cslb passes the Dial Request on to net.DialContext. Cslb has specific rules about when interception occurs. It normally only considers intercepting port 80 and port 443 however if the "cslb_allports" environment variable is set, cslb intercepts non-standard HTTP ports and maps them to numeric service names. For example http://example.net:8080 gets mapped to _8080._tcp.example.net as the SRV name to resolve. While cslb runs passively by caching the results of previous Dial Requests, it can also run actively by periodically performing health checks on targets. This is useful as an administrator can control health check behaviour to move a target "in and out of rotation" without changing DNS entries and waiting for TTLs to age out. Health checks are also likely to make the application a little more responsive as they are less likely to make a dial attempt to a target that is not working. Active health checking is enabled by the presence of a TXT RR in the sub-domain "_$port._cslb" of the target. E.g. if the SRV target is "s1.example.net:80" then cslb looks for the TXT RR at "_80._cslb.s1.example.net". If that TXT RR contains a URL then it becomes the health check URL. If no TXT RR exists or the contents do not form a valid URL then no active health check is performed for that target. The health check URL does not have to be related to the target in any particular way. It could be a URL to a central monitoring system which performs complicated application level tests and performance monitoring. Or it could be a URL on the target system itself. A health check is considered successful when a GET of the URL returns a 200 status and the content contains the uppercase text "OK" somewhere in the body (See the "cslb_hc_ok" environment variable for how this can be modified). Unless both those conditions are met the target is considered unavailable. Active health checks cease once a target becomes idle for too long and health check Dial Requests are *not* get intercepted by cslb. If your current service exists on a single server called "s1.example.net" and you want to spread the load across additional servers "s2.example.net" and "s3.example.net" and assuming you've added the "cslb" package to your application then the following DNS changes active cslb processing: Current DNS Additional DNS A number of observations about this DNS setup: Cslb maintains a cache of SRV lookups and the health status of targets. Cache entries automatically age out as a form of garbage collection. Removed cache entries stop any associated active health checks. Unfortunately the cache ageing does not have access to the DNS TTLs associated with the SRV RRs so it makes a best-guess at reasonable time-to-live values. The important point to note is that *all* values get periodically refreshed from the DNS. Nothing persists internally forever regardless of the level of activity. This means you can be sure that any changes to your DNS will be noticed by cslb in due course. Cslb optional runs a web server which presents internal statistics on its performance and activity. This web service has *no* access controls so it's best to only run it on a loopback address. Setting the environment variable "cslb_listen" to a listen address activates the status server. E.g.: On initialization the cslb package examines the "cslb_options" environment variable for single letter options which have the following meaning: An example of how this might by used from a shell: Many internal configuration values can be over-ridden with environment variables as shown in this table: Any values which are invalid or fall outside a reasonable range are ignored. Cslb only knows about the results of network connection attempts made by DialContext and the results of any configured health checks. If a service is accepting network connections but not responding to HTTP requests - or responding negatively - the client experiences failures but cslb will be unaware of these failures. The result is that cslb will continue to direct future Dial Requests to that faulty service in accordance with the SRV priorities. If your service is vulnerable to this scenario, active health checks are recommended. This could be something ss simple as an on-service health check which responds based on recent "200 OK" responses in the service log file. Alternatively an on-service monitor which closes the listen socket will also work. In general, defining a failing service is a complicated matter that only the application truly understands. For this reason health checks are used as an intermediary which does understand application level failures and converts them to simple language which cslb groks. While every service is different there are a few general guidelines which apply to most services when using cslb. First of all, run simple health checks if you can and configure them for use by cslb. Second, have each target configured with both ipv4 and ipv6 addresses. This affords two potentially independent network paths to the targets. Furthermore, net.Dialer attempts both ipv4 and ipv6 connections simultaneously which maximizes responsiveness for the client. Third, consider a "canary" target as a low preference (highest numeric value SRV priority) target. If this "canary" target is accessed by cslb clients it tells you they are having trouble reaching their "real" targets. Being able to run a "canary" service is one of the side-benefits of cslb and SRVs. Whan analyzing the Status Web Page or watching the Run Time Control output, observers need to be aware of caching by the http (and possibly other) packages. For example not every call to http.Get() results in a Dial Request as httpClient tries to re-use connections. In a similar vein if you change a DNS entry and don't believe cslb has noticed this change within an appropriate TTL amount of time, be aware that on some platforms the intervening recursive resolvers adjust TTLs as they see fit. For example some home-gamer routers are known to increase short TTLs to values they believe to be a more "appropriate" in an attempt to reduce their cache churn. Perhaps the biggest caveat of all is that cslb relies on being enabled for all http.Transports in use by your application. If you are importing a package (either directly or indirectly) which constructs its own http.Transports then you'll need to modify that package to call cslb.Enable() otherwise those http requests will not be intercepted. Of course if the package is making requests incidental to the core functionality of your application then maybe it doesn't matter and you can leave them be. Something to be aware of. -----

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. - UTF-8 support - Choice of measurement unit, page format and margins - Page header and footer management - Automatic page breaks, line breaks, and text justification - Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images - Colors, gradients and alpha channel transparency - Outline bookmarks - Internal and external links - TrueType, Type1 and encoding support - Page compression - Lines, Bézier curves, arcs, and ellipses - Rotation, scaling, skewing, translation, and mirroring - Clipping - Document protection - Layers - Templates - Barcodes - Charting facility - Import PDFs as templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. gofpdf supports UTF-8 TrueType fonts and “right-to-left” languages. Note that Chinese, Japanese, and Korean characters may not be included in many general purpose fonts. For these languages, a specialized font (for example, NotoSansSC for simplified Chinese) can be used. Also, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. This repository will not be maintained, at least for some unknown duration. But it is hoped that gofpdf has a bright future in the open source world. Due to Go’s promise of compatibility, gofpdf should continue to function without modification for a longer time than would be the case with many other languages. Forks should be based on the last viable commit. Tools such as active-forks can be used to select a fork that looks promising for your needs. If a particular fork looks like it has taken the lead in attracting followers, this README will be updated to point people in that direction. The efforts of all contributors to this project have been deeply appreciated. Best wishes to all of you. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running go test ./... is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you’ll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory and if the third argument to ComparePDFFiles() in internal/example/example.go is true. (By default it is false.) The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). You should use AddUTF8Font() or AddUTF8FontFromBytes() to add a TrueType UTF-8 encoded font. Use RTL() and LTR() methods switch between “right-to-left” and “left-to-right” mode. In order to use a different non-UTF-8 TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run “go build”. This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include Google Fonts and DejaVu Fonts. The draw2d package is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the contrib directory. Here are guidelines for making submissions. Your change should - be compatible with the MIT License - be properly documented - be formatted with go fmt - include an example in fpdf_test.go if appropriate - conform to the standards of golint and go vet, that is, golint . and go vet . should not generate any warnings - not diminish test coverage Pull requests are the preferred means of accepting your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package’s code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Bruno Michel has provided valuable assistance with the code. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image’s extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Dan Meyers added support for embedded JavaScript. David Fish added a generic alias-replacement function to enable, among other things, table of contents functionality. Andy Bakun identified and corrected a problem in which the internal catalogs were not sorted stably. Paul Montag added encoding and decoding functionality for templates, including images that are embedded in templates; this allows templates to be stored independently of gofpdf. Paul also added support for page boxes used in printing PDF documents. Wojciech Matusiak added supported for word spacing. Artem Korotkiy added support of UTF-8 fonts. Dave Barnes added support for imported objects and templates. Brigham Thompson added support for rounded rectangles. Joe Westcott added underline functionality and optimized image storage. Benoit KUGLER contributed support for rectangles with corners of unequal radius, modification times, and for file attachments and annotations. - Remove all legacy code page font support; use UTF-8 exclusively - Improve test coverage as reported by the coverage tool. Example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers • Templates • Barcodes gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. In particular, languages that require more than one code page such as Chinese, Japanese, and Arabic are not currently supported. This is explained in issue 109. However, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test ./..." is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory. The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. The draw2d package (https://github.com/llgcode/draw2d) is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the `contrib` directory. Here are guidelines for making submissions. Your change should • be compatible with the MIT License • be properly documented • be formatted with `go fmt` • include an example in fpdf_test.go if appropriate • conform to the standards of golint (https://github.com/golang/lint) and go vet (https://godoc.org/golang.org/x/tools/cmd/vet), that is, `golint .` and `go vet .` should not generate any warnings • not diminish test coverage (https://blog.golang.org/cover) Pull requests (https://help.github.com/articles/using-pull-requests/) work nicely as a means of contributing your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package's code and documentation are closely derived from the FPDF library (http://www.fpdf.org/) created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Bruno Michel has provided valuable assistance with the code. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool. This example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers • Templates • Barcodes gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. In particular, languages that require more than one code page such as Chinese, Japanese, and Arabic are not currently supported. This is explained in issue 109. However, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test ./..." is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory. The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. The draw2d package (https://github.com/llgcode/draw2d) is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the `contrib` directory. Here are guidelines for making submissions. Your change should • be compatible with the MIT License • be properly documented • be formatted with `go fmt` • include an example in fpdf_test.go if appropriate • conform to the standards of golint (https://github.com/golang/lint) and go vet (https://godoc.org/golang.org/x/tools/cmd/vet), that is, `golint .` and `go vet .` should not generate any warnings • not diminish test coverage (https://blog.golang.org/cover) Pull requests (https://help.github.com/articles/using-pull-requests/) work nicely as a means of contributing your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package's code and documentation are closely derived from the FPDF library (http://www.fpdf.org/) created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Bruno Michel has provided valuable assistance with the code. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool. This example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. - UTF-8 support - Choice of measurement unit, page format and margins - Page header and footer management - Automatic page breaks, line breaks, and text justification - Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images - Colors, gradients and alpha channel transparency - Outline bookmarks - Internal and external links - TrueType, Type1 and encoding support - Page compression - Lines, Bézier curves, arcs, and ellipses - Rotation, scaling, skewing, translation, and mirroring - Clipping - Document protection - Layers - Templates - Barcodes - Charting facility - Import PDFs as templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. gofpdf supports UTF-8 TrueType fonts and “right-to-left” languages. Note that Chinese, Japanese, and Korean characters may not be included in many general purpose fonts. For these languages, a specialized font (for example, NotoSansSC for simplified Chinese) can be used. Also, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. This repository will not be maintained, at least for some unknown duration. But it is hoped that gofpdf has a bright future in the open source world. Due to Go’s promise of compatibility, gofpdf should continue to function without modification for a longer time than would be the case with many other languages. Forks should be based on the last viable commit. Tools such as active-forks can be used to select a fork that looks promising for your needs. If a particular fork looks like it has taken the lead in attracting followers, this README will be updated to point people in that direction. The efforts of all contributors to this project have been deeply appreciated. Best wishes to all of you. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running go test ./... is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you’ll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory and if the third argument to ComparePDFFiles() in internal/example/example.go is true. (By default it is false.) The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). You should use AddUTF8Font() or AddUTF8FontFromBytes() to add a TrueType UTF-8 encoded font. Use RTL() and LTR() methods switch between “right-to-left” and “left-to-right” mode. In order to use a different non-UTF-8 TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run “go build”. This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include Google Fonts and DejaVu Fonts. The draw2d package is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the contrib directory. Here are guidelines for making submissions. Your change should - be compatible with the MIT License - be properly documented - be formatted with go fmt - include an example in fpdf_test.go if appropriate - conform to the standards of golint and go vet, that is, golint . and go vet . should not generate any warnings - not diminish test coverage Pull requests are the preferred means of accepting your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package’s code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Bruno Michel has provided valuable assistance with the code. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image’s extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Dan Meyers added support for embedded JavaScript. David Fish added a generic alias-replacement function to enable, among other things, table of contents functionality. Andy Bakun identified and corrected a problem in which the internal catalogs were not sorted stably. Paul Montag added encoding and decoding functionality for templates, including images that are embedded in templates; this allows templates to be stored independently of gofpdf. Paul also added support for page boxes used in printing PDF documents. Wojciech Matusiak added supported for word spacing. Artem Korotkiy added support of UTF-8 fonts. Dave Barnes added support for imported objects and templates. Brigham Thompson added support for rounded rectangles. Joe Westcott added underline functionality and optimized image storage. Benoit KUGLER contributed support for rectangles with corners of unequal radius, modification times, and for file attachments and annotations. - Remove all legacy code page font support; use UTF-8 exclusively - Improve test coverage as reported by the coverage tool. Example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers • Templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. However, support is provided to translate UTF-8 runes to code page encodings. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test ./..." is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory. The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. The draw2d package (https://github.com/llgcode/draw2d) is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the `contrib` directory. Here are guidelines for making submissions. Your change should • be compatible with the MIT License • be properly documented • be formatted with `go fmt` • include an example in fpdf_test.go if appropriate • conform to the standards of golint (https://github.com/golang/lint) and go vet (https://godoc.org/golang.org/x/tools/cmd/vet), that is, `golint .` and `go vet .` should not generate any warnings • not diminish test coverage (https://blog.golang.org/cover) Pull requests (https://help.github.com/articles/using-pull-requests/) work nicely as a means of contributing your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package's code and documentation are closely derived from the FPDF library (http://www.fpdf.org/) created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Additionally, he augmented the basic HTML functionality with aligned text. Bruno Michel has provided valuable assistance with the code. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool. This example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retreived with the output call where it can be handled by the application.

lf is a terminal file manager. Source code can be found in the repository at https://github.com/gokcehan/lf. This documentation can either be read from terminal using 'lf -doc' or online at https://godoc.org/github.com/gokcehan/lf. You can also use 'doc' command (default '<f-1>') inside lf to view the documentation in a pager. You can run 'lf -help' to see descriptions of command line options. The following commands are provided by lf: The following command line commands are provided by lf: The following options can be used to customize the behavior of lf: The following environment variables are exported for shell commands: The following commands/keybindings are provided by default: The following additional keybindings are provided by default: Configuration files should be located at: Marks file should be located at: History file should be located at: You can configure the default values of following variables to change these locations: A sample configuration file can be found at https://github.com/gokcehan/lf/blob/master/etc/lfrc.example. This section shows information about builtin commands. Modal commands do not take any arguments, but instead change the operation mode to read their input conveniently, and so they are meant to be assigned to keybindings. Quit lf and return to the shell. Move the current file selection upwards/downwards by one/half a page/full page. Change the current working directory to the parent directory. If the current file is a directory, then change the current directory to it, otherwise, execute the 'open' command. A default 'open' command is provided to call the default system opener asynchronously with the current file as the argument. A custom 'open' command can be defined to override this default. (See also 'OPENER' variable and 'Opening Files' section) Move the current file selection to the top/bottom of the directory. Toggle the selection of the current file or files given as arguments. Reverse the selection of all files in the current directory (i.e. 'toggle' all files). Selections in other directories are not effected by this command. You can define a new command to select all files in the directory by combining 'invert' with 'unselect' (i.e. `cmd select-all :unselect; invert`), though this will also remove selections in other directories. Remove the selection of all files in all directories. Select files that match the given glob. Unselect files that match the given glob. If there are no selections, save the path of the current file to the copy buffer, otherwise, copy the paths of selected files. If there are no selections, save the path of the current file to the cut buffer, otherwise, copy the paths of selected files. Copy/Move files in copy/cut buffer to the current working directory. Clear file paths in copy/cut buffer. Synchronize copied/cut files with server. This command is automatically called when required. Draw the screen. This command is automatically called when required. Synchronize the terminal and redraw the screen. Load modified files and directories. This command is automatically called when required. Flush the cache and reload all files and directories. Print given arguments to the message line at the bottom. Print given arguments to the message line at the bottom and also to the log file. Print given arguments to the message line at the bottom in red color and also to the log file. Change the working directory to the given argument. Change the current file selection to the given argument. Remove the current file or selected file(s). Rename the current file using the builtin method. A custom 'rename' command can be defined to override this default. Read the configuration file given in the argument. Simulate key pushes given in the argument. Read a command to evaluate. Read a shell command to execute. (See also 'Prefixes' and 'Shell Commands' sections) Read a shell command to execute piping its standard I/O to the bottom statline. (See also 'Prefixes' and 'Piping Shell Commands' sections) Read a shell command to execute and wait for a key press in the end. (See also 'Prefixes' and 'Waiting Shell Commands' sections) Read a shell command to execute synchronously without standard I/O. Read key(s) to find the appropriate file name match in the forward/backward direction and jump to the next/previous match. (See also 'anchorfind', 'findlen', 'wrapscan', 'ignorecase', 'smartcase', 'ignoredia', and 'smartdia' options and 'Searching Files' section) Read a pattern to search for a file name match in the forward/backward direction and jump to the next/previous match. (See also 'globsearch', 'incsearch', 'wrapscan', 'ignorecase', 'smartcase', 'ignoredia', and 'smartdia' options and 'Searching Files' section) Save the current directory as a bookmark assigned to the given key. Change the current directory to the bookmark assigned to the given key. A special bookmark "'" holds the previous directory after a 'mark-load', 'cd', or 'select' command. Remove a bookmark assigned to the given key. This section shows information about command line commands. These should be mostly compatible with readline keybindings. A character refers to a unicode code point, a word consists of letters and digits, and a unix word consists of any non-blank characters. Quit command line mode and return to normal mode. Autocomplete the current word. Autocomplete the current word, then you can press the binded key/s again to cycle completition options. Autocomplete the current word, then you can press the binded key/s again to cycle completition options backwards. Execute the current line. Interrupt the current shell-pipe command and return to the normal mode. Go to next/previous item in the history. Move the cursor to the left/right. Move the cursor to the beginning/end of line. Delete the next character in forward/backward direction. Delete everything up to the beginning/end of line. Delete the previous unix word. Paste the buffer content containing the last deleted item. Transpose the positions of last two characters/words. Move the cursor by one word in forward/backward direction. Delete the next word in forward direction. Capitalize/uppercase/lowercase the current word and jump to the next word. This section shows information about options to customize the behavior. Character ':' is used as the separator for list options '[]int' and '[]string'. When this option is enabled, find command starts matching patterns from the beginning of file names, otherwise, it can match at an arbitrary position. When this option is enabled, directory sizes show the number of items inside instead of the size of directory file. The former needs to be calculated by reading the directory and counting the items inside. The latter is directly provided by the operating system and it does not require any calculation, though it is non-intuitive and it can often be misleading. This option is disabled by default for performance reasons. This option only has an effect when 'info' has a 'size' field and the pane is wide enough to show the information. A thousand items are counted per directory at most, and bigger directories are shown as '999+'. Show directories first above regular files. Draw boxes around panes with box drawing characters. Format string of error messages shown in the bottom message line. File separator used in environment variables 'fs' and 'fx'. Number of characters prompted for the find command. When this value is set to 0, find command prompts until there is only a single match left. When this option is enabled, search command patterns are considered as globs, otherwise they are literals. With globbing, '*' matches any sequence, '?' matches any character, and '[...]' or '[^...] matches character sets or ranges. Otherwise, these characters are interpreted as they are. Show hidden files. On unix systems, hidden files are determined by the value of 'hiddenfiles'. On windows, only files with hidden attributes are considered hidden files. List of hidden file glob patterns. Patterns can be given as relative or absolute paths. Globbing supports the usual special characters, '*' to match any sequence, '?' to match any character, and '[...]' or '[^...] to match character sets or ranges. In addition, if a pattern starts with '!', then its matches are excluded from hidden files. Show icons before each item in the list. By default, only two icons, 🗀 (U+1F5C0) and 🗎 (U+1F5CE), are used for directories and files respectively, as they are supported in the unicode standard. Icons can be configured with an environment variable named 'LF_ICONS'. The syntax of this variable is similar to 'LS_COLORS'. See the wiki page for an example icon configuration. Sets 'IFS' variable in shell commands. It works by adding the assignment to the beginning of the command string as 'IFS='...'; ...'. The reason is that 'IFS' variable is not inherited by the shell for security reasons. This method assumes a POSIX shell syntax and so it can fail for non-POSIX shells. This option has no effect when the value is left empty. This option does not have any effect on windows. Ignore case in sorting and search patterns. Ignore diacritics in sorting and search patterns. Jump to the first match after each keystroke during searching. List of information shown for directory items at the right side of pane. Currently supported information types are 'size', 'time', 'atime', and 'ctime'. Information is only shown when the pane width is more than twice the width of information. Send mouse events as input. Show the position number for directory items at the left side of pane. When 'relativenumber' is enabled, only the current line shows the absolute position and relative positions are shown for the rest. Set the interval in seconds for periodic checks of directory updates. This works by periodically calling the 'load' command. Note that directories are already updated automatically in many cases. This option can be useful when there is an external process changing the displayed directory and you are not doing anything in lf. Periodic checks are disabled when the value of this option is set to zero. Show previews of files and directories at the right most pane. If the file has more lines than the preview pane, rest of the lines are not read. Files containing the null character (U+0000) in the read portion are considered binary files and displayed as 'binary'. Set the path of a previewer file to filter the content of regular files for previewing. The file should be executable. Five arguments are passed to the file, first is the current file name; the second, third, fourth, and fifth are width, height, horizontal position, and vertical position of preview pane respectively. SIGPIPE signal is sent when enough lines are read. If the previewer returns a non-zero exit code, then the preview cache for the given file is disabled. This means that if the file is selected in the future, the previewer is called once again. Preview filtering is disabled and files are displayed as they are when the value of this option is left empty. Set the path of a cleaner file. This file will be called if previewing is enabled, the previewer is set, and the previously selected file had its preview cache disabled. The file should be executable. One argument is passed to the file; the path to the file whose preview should be cleaned. Preview clearing is disabled when the value of this option is left empty. Format string of the prompt shown in the top line. Special expansions are provided, '%u' as the user name, '%h' as the host name, '%w' as the working directory, '%d' as the working directory with a trailing path separator, and '%f' as the file name. Home folder is shown as '~' in the working directory expansion. Directory names are automatically shortened to a single character starting from the left most parent when the prompt does not fit to the screen. List of ratios of pane widths. Number of items in the list determines the number of panes in the ui. When 'preview' option is enabled, the right most number is used for the width of preview pane. Show the position number relative to the current line. When 'number' is enabled, current line shows the absolute position, otherwise nothing is shown. Reverse the direction of sort. Minimum number of offset lines shown at all times in the top and the bottom of the screen when scrolling. The current line is kept in the middle when this option is set to a large value that is bigger than the half of number of lines. A smaller offset can be used when the current file is close to the beginning or end of the list to show the maximum number of items. Shell executable to use for shell commands. On unix, a POSIX compatible shell is required. Shell commands are executed as 'shell shellopts -c command -- arguments'. On windows, '/c' is used instead of '-c' which should work in 'cmd' and 'powershell'. List of shell options to pass to the shell executable. Override 'ignorecase' option when the pattern contains an uppercase character. This option has no effect when 'ignorecase' is disabled. Override 'ignoredia' option when the pattern contains a character with diacritic. This option has no effect when 'ignoredia' is disabled. Sort type for directories. Currently supported sort types are 'natural', 'name', 'size', 'time', 'ctime', 'atime', and 'ext'. Number of space characters to show for horizontal tabulation (U+0009) character. Format string of the file modification time shown in the bottom line. Truncate character shown at the end when the file name does not fit to the pane. Searching can wrap around the file list. Scrolling can wrap around the file list. The following variables are exported for shell commands: These are referred with a '$' prefix on POSIX shells (e.g. '$f'), between '%' characters on Windows cmd (e.g. '%f%'), and with a '$env:' prefix on Windows powershell (e.g. '$env:f'). Current file selection as a full path. Selected file(s) separated with the value of 'filesep' option as full path(s). Selected file(s) (i.e. 'fs') if there are any selected files, otherwise current file selection (i.e. 'f'). Id of the running client. The value of this variable is set to the current nesting level when you run lf from a shell spawned inside lf. You can add the value of this variable to your shell prompt to make it clear that your shell runs inside lf. For example, with POSIX shells, you can use '[ -n "$LF_LEVEL" ] && PS1="$PS1""(lf level: $LF_LEVEL) "' in your shell configuration file (e.g. '~/.bashrc'). If this variable is set in the environment, use the same value, otherwise set the value to 'start' in Windows, 'open' in MacOS, 'xdg-open' in others. If this variable is set in the environment, use the same value, otherwise set the value to 'vi' on unix, 'notepad' in Windows. If this variable is set in the environment, use the same value, otherwise set the value to 'less' on unix, 'more' in Windows. If this variable is set in the environment, use the same value, otherwise set the value to 'sh' on unix, 'cmd' in Windows. The following command prefixes are used by lf: The same evaluator is used for the command line and the configuration file for read and shell commands. The difference is that prefixes are not necessary in the command line. Instead, different modes are provided to read corresponding commands. These modes are mapped to the prefix keys above by default. Characters from '#' to newline are comments and ignored: There are three special commands ('set', 'map', and 'cmd') and their variants for configuration. Command 'set' is used to set an option which can be boolean, integer, or string: Command 'map' is used to bind a key to a command which can be builtin command, custom command, or shell command: Command 'cmap' is used to bind a key to a command line command which can only be one of the builtin commands: You can delete an existing binding by leaving the expression empty: Command 'cmd' is used to define a custom command: You can delete an existing command by leaving the expression empty: If there is no prefix then ':' is assumed: An explicit ':' can be provided to group statements until a newline which is especially useful for 'map' and 'cmd' commands: If you need multiline you can wrap statements in '{{' and '}}' after the proper prefix. Regular keys are assigned to a command with the usual syntax: Keys combined with the shift key simply use the uppercase letter: Special keys are written in between '<' and '>' characters and always use lowercase letters: Angle brackets can be assigned with their special names: Function keys are prefixed with 'f' character: Keys combined with the control key are prefixed with 'c' character: Keys combined with the alt key are assigned in two different ways depending on the behavior of your terminal. Older terminals (e.g. xterm) may set the 8th bit of a character when the alt key is pressed. On these terminals, you can use the corresponding byte for the mapping: Newer terminals (e.g. gnome-terminal) may prefix the key with an escape key when the alt key is pressed. lf uses the escape delaying mechanism to recognize alt keys in these terminals (delay is 100ms). On these terminals, keys combined with the alt key are prefixed with 'a' character: Please note that, some key combinations are not possible due to the way terminals work (e.g. control and h combination sends a backspace key instead). The easiest way to find the name of a key combination is to press the key while lf is running and read the name of the key from the unknown mapping error. Mouse buttons are prefixed with 'm' character: Mouse wheel events are also prefixed with 'm' character: The usual way to map a key sequence is to assign it to a named or unnamed command. While this provides a clean way to remap builtin keys as well as other commands, it can be limiting at times. For this reason 'push' command is provided by lf. This command is used to simulate key pushes given as its arguments. You can 'map' a key to a 'push' command with an argument to create various keybindings. This is mainly useful for two purposes. First, it can be used to map a command with a command count: Second, it can be used to avoid typing the name when a command takes arguments: One thing to be careful is that since 'push' command works with keys instead of commands it is possible to accidentally create recursive bindings: These types of bindings create a deadlock when executed. Regular shell commands are the most basic command type that is useful for many purposes. For example, we can write a shell command to move selected file(s) to trash. A first attempt to write such a command may look like this: We check '$fs' to see if there are any selected files. Otherwise we just delete the current file. Since this is such a common pattern, a separate '$fx' variable is provided. We can use this variable to get rid of the conditional: The trash directory is checked each time the command is executed. We can move it outside of the command so it would only run once at startup: Since these are one liners, we can drop '{{' and '}}': Finally note that we set 'IFS' variable manually in these commands. Instead we could use the 'ifs' option to set it for all shell commands (i.e. 'set ifs "\n"'). This can be especially useful for interactive use (e.g. '$rm $f' or '$rm $fs' would simply work). This option is not set by default as it can behave unexpectedly for new users. However, use of this option is highly recommended and it is assumed in the rest of the documentation. Regular shell commands have some limitations in some cases. When an output or error message is given and the command exits afterwards, the ui is immediately resumed and there is no way to see the message without dropping to shell again. Also, even when there is no output or error, the ui still needs to be paused while the command is running. This can cause flickering on the screen for short commands and similar distractions for longer commands. Instead of pausing the ui, piping shell commands connects stdin, stdout, and stderr of the command to the statline in the bottom of the ui. This can be useful for programs following the unix philosophy to give no output in the success case, and brief error messages or prompts in other cases. For example, following rename command prompts for overwrite in the statline if there is an existing file with the given name: You can also output error messages in the command and it will show up in the statline. For example, an alternative rename command may look like this: Note that input is line buffered and output and error are byte buffered. Waiting shell commands are similar to regular shell commands except that they wait for a key press when the command is finished. These can be useful to see the output of a program before the ui is resumed. Waiting shell commands are more appropriate than piping shell commands when the command is verbose and the output is best displayed as multiline. Asynchronous shell commands are used to start a command in the background and then resume operation without waiting for the command to finish. Stdin, stdout, and stderr of the command is neither connected to the terminal nor to the ui. One of the more advanced features in lf is remote commands. All clients connect to a server on startup. It is possible to send commands to all or any of the connected clients over the common server. This is used internally to notify file selection changes to other clients. To use this feature, you need to use a client which supports communicating with a UNIX-domain socket. OpenBSD implementation of netcat (nc) is one such example. You can use it to send a command to the socket file: Since such a client may not be available everywhere, lf comes bundled with a command line flag to be used as such. When using lf, you do not need to specify the address of the socket file. This is the recommended way of using remote commands since it is shorter and immune to socket file address changes: In this command 'send' is used to send the rest of the string as a command to all connected clients. You can optionally give it an id number to send a command to a single client: All clients have a unique id number but you may not be aware of the id number when you are writing a command. For this purpose, an '$id' variable is exported to the environment for shell commands. You can use it to send a remote command from a client to the server which in return sends a command back to itself. So now you can display a message in the current client by calling the following in a shell command: Since lf does not have control flow syntax, remote commands are used for such needs. For example, you can configure the number of columns in the ui with respect to the terminal width as follows: Besides 'send' command, there are also two commands to get or set the current file selection. Two possible modes 'copy' and 'move' specify whether selected files are to be copied or moved. File names are separated by newline character. Setting the file selection is done with 'save' command: Getting the file selection is similarly done with 'load' command: There is a 'quit' command to close client connections and quit the server: Lastly, there is a 'conn' command to connect the server as a client. This should not be needed for users. lf uses its own builtin copy and move operations by default. These are implemented as asynchronous operations and progress is shown in the bottom ruler. These commands do not overwrite existing files or directories with the same name. Instead, a suffix that is compatible with '--backup=numbered' option in GNU cp is added to the new files or directories. Only file modes are preserved and all other attributes are ignored including ownership, timestamps, context, links, and xattr. Special files such as character and block devices, named pipes, and sockets are skipped and links are followed. Moving is performed using the rename operation of the underlying OS. For cross-device moving, lf falls back to copying and then deletes the original files if there are no errors. Operation errors are shown in the message line as well as the log file and they do not preemptively finish the corresponding file operation. File operations can be performed on the current selected file or alternatively on multiple files by selecting them first. When you 'copy' a file, lf doesn't actually copy the file on the disk, but only records its name to memory. The actual file copying takes place when you 'paste'. Similarly 'paste' after a 'cut' operation moves the file. You can customize copy and move operations by defining a 'paste' command. This is a special command that is called when it is defined instead of the builtin implementation. You can use the following example as a starting point: Some useful things to be considered are to use the backup ('--backup') and/or preserve attributes ('-a') options with 'cp' and 'mv' commands if they support it (i.e. GNU implementation), change the command type to asynchronous, or use 'rsync' command with progress bar option for copying and feed the progress to the client periodically with remote 'echo' calls. By default, lf does not assign 'delete' command to a key to protect new users. You can customize file deletion by defining a 'delete' command. You can also assign a key to this command if you like. An example command to move selected files to a trash folder and remove files completely after a prompt are provided in the example configuration file. There are two mechanisms implemented in lf to search a file in the current directory. Searching is the traditional method to move the selection to a file matching a given pattern. Finding is an alternative way to search for a pattern possibly using fewer keystrokes. Searching mechanism is implemented with commands 'search' (default '/'), 'search-back' (default '?'), 'search-next' (default 'n'), and 'search-prev' (default 'N'). You can enable 'globsearch' option to match with a glob pattern. Globbing supports '*' to match any sequence, '?' to match any character, and '[...]' or '[^...] to match character sets or ranges. You can enable 'incsearch' option to jump to the current match at each keystroke while typing. In this mode, you can either use 'cmd-enter' to accept the search or use 'cmd-escape' to cancel the search. Alternatively, you can also map some other commands with 'cmap' to accept the search and execute the command immediately afterwards. Possible candidates are 'up', 'down' and their variants, 'top', 'bottom', 'updir', and 'open' commands. For example, you can use arrow keys to finish the search with the following mappings: Finding mechanism is implemented with commands 'find' (default 'f'), 'find-back' (default 'F'), 'find-next' (default ';'), 'find-prev' (default ','). You can disable 'anchorfind' option to match a pattern at an arbitrary position in the filename instead of the beginning. You can set the number of keys to match using 'findlen' option. If you set this value to zero, then the the keys are read until there is only a single match. Default values of these two options are set to jump to the first file with the given initial. Some options effect both searching and finding. You can disable 'wrapscan' option to prevent searches to wrap around at the end of the file list. You can disable 'ignorecase' option to match cases in the pattern and the filename. This option is already automatically overridden if the pattern contains upper case characters. You can disable 'smartcase' option to disable this behavior. Two similar options 'ignoredia' and 'smartdia' are provided to control matching diacritics in latin letters. You can define a an 'open' command (default 'l' and '<right>') to configure file opening. This command is only called when the current file is not a directory, otherwise the directory is entered instead. You can define it just as you would define any other command: It is possible to use different command types: You may want to use either file extensions or mime types from 'file' command: You may want to use 'setsid' before your opener command to have persistent processes that continue to run after lf quits. Following command is provided by default: You may also use any other existing file openers as you like. Possible options are 'libfile-mimeinfo-perl' (executable name is 'mimeopen'), 'rifle' (ranger's default file opener), or 'mimeo' to name a few. lf previews files on the preview pane by printing the file until the end or the preview pane is filled. This output can be enhanced by providing a custom preview script for filtering. This can be used to highlight source codes, list contents of archive files or view pdf or image files as text to name few. For coloring lf recognizes ansi escape codes. In order to use this feature you need to set the value of 'previewer' option to the path of an executable file. lf passes the current file name as the first argument and the height of the preview pane as the second argument when running this file. Output of the execution is printed in the preview pane. You may want to use the same script in your pager mapping as well if any: For 'less' pager, you may instead utilize 'LESSOPEN' mechanism so that useful information about the file such as the full path of the file can be displayed in the statusline below: Since this script is called for each file selection change it needs to be as efficient as possible and this responsibility is left to the user. You may use file extensions to determine the type of file more efficiently compared to obtaining mime types from 'file' command. Extensions can then be used to match cleanly within a conditional: Another important consideration for efficiency is the use of programs with short startup times for preview. For this reason, 'highlight' is recommended over 'pygmentize' for syntax highlighting. Besides, it is also important that the application is processing the file on the fly rather than first reading it to the memory and then do the processing afterwards. This is especially relevant for big files. lf automatically closes the previewer script output pipe with a SIGPIPE when enough lines are read. When everything else fails, you can make use of the height argument to only feed the first portion of the file to a program for preview. Note that some programs may not respond well to SIGPIPE to exit with a non-zero return code and avoid caching. You may trap SIGPIPE in your preview script to avoid error propogation: You may also use an existing preview filter as you like. Your system may already come with a preview filter named 'lesspipe'. These filters may have a mechanism to add user customizations as well. See the related documentations for more information. lf changes the working directory of the process to the current directory so that shell commands always work in the displayed directory. After quitting, it returns to the original directory where it is first launched like all shell programs. If you want to stay in the current directory after quitting, you can use one of the example wrapper shell scripts provided in the repository. There is a special command 'on-cd' that runs a shell command when it is defined and the directory is changed. You can define it just as you would define any other command: If you want to print escape sequences, you may redirect 'printf' output to '/dev/tty'. The following xterm specific escape sequence sets the terminal title to the working directory: This command runs whenever you change directory but not on startup. You can add an extra call to make it run on startup as well: Note that all shell commands are possible but `%` and `&` are usually more appropriate as `$` and `!` causes flickers and pauses respectively. lf tries to automatically adapt its colors to the environment. It starts with a default colorscheme and updates colors using values of existing environment variables possibly by overwriting its previous values. Colors are set in the following order: Please refer to the corresponding man pages for more information about 'LSCOLORS' and 'LS_COLORS'. 'LF_COLORS' is provided with the same syntax as 'LS_COLORS' in case you want to configure colors only for lf but not ls. This can be useful since there are some differences between ls and lf, though one should expect the same behavior for common cases. You can configure lf colors in two different ways. First, you can only configure 8 basic colors used by your terminal and lf should pick up those colors automatically. Depending on your terminal, you should be able to select your colors from a 24-bit palette. This is the recommended approach as colors used by other programs will also match each other. Second, you can set the values of environmental variables mentioned above for fine grained customization. Note that 'LS_COLORS/LF_COLORS' are more powerful than 'LSCOLORS' and they can be used even when GNU programs are not installed on the system. You can combine this second method with the first method for best results. Lastly, you may also want to configure the colors of the prompt line to match the rest of the colors. Colors of the prompt line can be configured using the 'promptfmt' option which can include hardcoded colors as ansi escapes. See the default value of this option to have an idea about how to color this line. It is worth noting that lf uses as many colors are advertised by your terminal's entry in your systems terminfo or infocmp database, if this is not present lf will default to an internal database. For terminals supporting 24-bit (or "true") color that do not have a database entry (or one that does not advertise all capabilities), support can be enabled by either setting the '$COLORTERM' variable to "truecolor" or ensuring '$TERM' is set to a value that ends with "-truecolor". Default lf colors are mostly taken from GNU dircolors defaults. These defaults use 8 basic colors and bold attribute. Default dircolors entries with background colors are simplified to avoid confusion with current file selection in lf. Similarly, there are only file type matchings and extension matchings are left out for simplicity. Default values are as follows given with their matching order in lf: Note that, lf first tries matching file names and then falls back to file types. The full order of matchings from most specific to least are as follows: For example, given a regular text file '/path/to/README.txt', the following entries are checked in the configuration and the first one to match is used: Given a regular directory '/path/to/example.d', the following entries are checked in the configuration and the first one to match is used: Note that glob-like patterns do not actually perform glob matching due to performance reasons. For example, you can set a variable as follows: Having all entries on a single line can make it hard to read. You may instead divide it to multiple lines in between double quotes by escaping newlines with backslashes as follows: Having such a long variable definition in a shell configuration file might be undesirable. You may instead put this definition in a separate file and source it in your shell configuration file as follows: See the wiki page for ansi escape codes https://en.wikipedia.org/wiki/ANSI_escape_code. Icons are configured using 'LF_ICONS' environment variable. This variable uses the same syntax as 'LS_COLORS/LF_COLORS'. Instead of colors, you should put a single characters as values of entries. Do not forget to enable 'icons' option to see the icons. Default values are as follows given with their matching order in lf: See the wiki page for an example icons configuration https://github.com/gokcehan/lf/wiki/Icons.

Package ora implements an Oracle database driver. ### Golang Oracle Database Driver ### #### TL;DR; just use it #### Call stored procedure with OUT parameters: An Oracle database may be accessed through the database/sql(http://golang.org/pkg/database/sql) package or through the ora package directly. database/sql offers connection pooling, thread safety, a consistent API to multiple database technologies and a common set of Go types. The ora package offers additional features including pointers, slices, nullable types, numerics of various sizes, Oracle-specific types, Go return type configuration, and Oracle abstractions such as environment, server and session. The ora package is written with the Oracle Call Interface (OCI) C-language libraries provided by Oracle. The OCI libraries are a standard for client application communication and driver communication with Oracle databases. The ora package has been verified to work with: * Oracle Standard 11g (11.2.0.4.0), Linux x86_64 (RHEL6) * Oracle Enterprise 12c (12.1.0.1.0), Windows 8.1 and AMD64. --- * [Installation](https://github.com/rana/ora#installation) * [Data Types](https://github.com/rana/ora#data-types) * [SQL Placeholder Syntax](https://github.com/rana/ora#sql-placeholder-syntax) * [Working With The Sql Package](https://github.com/rana/ora#working-with-the-sql-package) * [Working With The Oracle Package Directly](https://github.com/rana/ora#working-with-the-oracle-package-directly) * [Logging](https://github.com/rana/ora#logging) * [Test Database Setup](https://github.com/rana/ora#test-database-setup) * [Limitations](https://github.com/rana/ora#limitations) * [License](https://github.com/rana/ora#license) * [API Reference](http://godoc.org/github.com/rana/ora#pkg-index) * [Examples](./examples) --- Minimum requirements are Go 1.3 with CGO enabled, a GCC C compiler, and Oracle 11g (11.2.0.4.0) or Oracle Instant Client (11.2.0.4.0). Install Oracle or Oracle Instant Client. Copy the [oci8.pc](contrib/oci8.pc) from the `contrib` folder (or the one for your system, maybe tailored to your specific locations) to a folder in `$PKG_CONFIG_PATH` or a system folder, such as The ora package has no external Go dependencies and is available on GitHub and gopkg.in: *WARNING*: If you have Oracle Instant Client 11.2, you'll need to add "=lnnz11" to the list of linked libs! Otherwise, you may encounter "undefined reference to `nzosSCSP_SetCertSelectionParams' " errors. Oracle Instant Client 12.1 does not need this. The ora package supports all built-in Oracle data types. The supported Oracle built-in data types are NUMBER, BINARY_DOUBLE, BINARY_FLOAT, FLOAT, DATE, TIMESTAMP, TIMESTAMP WITH TIME ZONE, TIMESTAMP WITH LOCAL TIME ZONE, INTERVAL YEAR TO MONTH, INTERVAL DAY TO SECOND, CHAR, NCHAR, VARCHAR, VARCHAR2, NVARCHAR2, LONG, CLOB, NCLOB, BLOB, LONG RAW, RAW, ROWID and BFILE. SYS_REFCURSOR is also supported. Oracle does not provide a built-in boolean type. Oracle provides a single-byte character type. A common practice is to define two single-byte characters which represent true and false. The ora package adopts this approach. The oracle package associates a Go bool value to a Go rune and sends and receives the rune to a CHAR(1 BYTE) column or CHAR(1 CHAR) column. The default false rune is zero '0'. The default true rune is one '1'. The bool rune association may be configured or disabled when directly using the ora package but not with the database/sql package. Within a SQL string a placeholder may be specified to indicate where a Go variable is placed. The SQL placeholder is an Oracle identifier, from 1 to 30 characters, prefixed with a colon (:). For example: Placeholders within a SQL statement are bound by position. The actual name is not used by the ora package driver e.g., placeholder names :c1, :1, or :xyz are treated equally. The `database/sql` package provides a LastInsertId method to return the last inserted row's id. Oracle does not provide such functionality, but if you append `... RETURNING col /*LastInsertId*/` to your SQL, then it will be presented as LastInsertId. Note that you have to mark with a `/*LastInsertId*/` (case insensitive) your `RETURNING` part, to allow ora to return the last column as `LastInsertId()`. That column must fit in `int64`, though! You may access an Oracle database through the database/sql package. The database/sql package offers a consistent API across different databases, connection pooling, thread safety and a set of common Go types. database/sql makes working with Oracle straight-forward. The ora package implements interfaces in the database/sql/driver package enabling database/sql to communicate with an Oracle database. Using database/sql ensures you never have to call the ora package directly. When using database/sql, the mapping between Go types and Oracle types may be changed slightly. The database/sql package has strict expectations on Go return types. The Go-to-Oracle type mapping for database/sql is: The "ora" driver is automatically registered for use with sql.Open, but you can call ora.SetCfg to set the used configuration options including statement configuration and Rset configuration. When configuring the driver for use with database/sql, keep in mind that database/sql has strict Go type-to-Oracle type mapping expectations. The ora package allows programming with pointers, slices, nullable types, numerics of various sizes, Oracle-specific types, Go return type configuration, and Oracle abstractions such as environment, server and session. When working with the ora package directly, the API is slightly different than database/sql. When using the ora package directly, the mapping between Go types and Oracle types may be changed. The Go-to-Oracle type mapping for the ora package is: An example of using the ora package directly: Pointers may be used to capture out-bound values from a SQL statement such as an insert or stored procedure call. For example, a numeric pointer captures an identity value: A string pointer captures an out parameter from a stored procedure: Slices may be used to insert multiple records with a single insert statement: The ora package provides nullable Go types to support DML operations such as insert and select. The nullable Go types provided by the ora package are Int64, Int32, Int16, Int8, Uint64, Uint32, Uint16, Uint8, Float64, Float32, Time, IntervalYM, IntervalDS, String, Bool, Binary and Bfile. For example, you may insert nullable Strings and select nullable Strings: The `Stmt.Prep` method is variadic accepting zero or more `GoColumnType` which define a Go return type for a select-list column. For example, a Prep call can be configured to return an int64 and a nullable Int64 from the same column: Go numerics of various sizes are supported in DML operations. The ora package supports int64, int32, int16, int8, uint64, uint32, uint16, uint8, float64 and float32. For example, you may insert a uint16 and select numerics of various sizes: If a non-nullable type is defined for a nullable column returning null, the Go type's zero value is returned. GoColumnTypes defined by the ora package are: When Stmt.Prep doesn't receive a GoColumnType, or receives an incorrect GoColumnType, the default value defined in RsetCfg is used. EnvCfg, SrvCfg, SesCfg, StmtCfg and RsetCfg are the main configuration structs. EnvCfg configures aspects of an Env. SrvCfg configures aspects of a Srv. SesCfg configures aspects of a Ses. StmtCfg configures aspects of a Stmt. RsetCfg configures aspects of Rset. StmtCfg and RsetCfg have the most options to configure. RsetCfg defines the default mapping between an Oracle select-list column and a Go type. StmtCfg may be set in an EnvCfg, SrvCfg, SesCfg and StmtCfg. RsetCfg may be set in a Stmt. EnvCfg.StmtCfg, SrvCfg.StmtCfg, SesCfg.StmtCfg may optionally be specified to configure a statement. If StmtCfg isn't specified default values are applied. EnvCfg.StmtCfg, SrvCfg.StmtCfg, SesCfg.StmtCfg cascade to new descendent structs. When ora.OpenEnv() is called a specified EnvCfg is used or a default EnvCfg is created. Creating a Srv with env.OpenSrv() will use SrvCfg.StmtCfg if it is specified; otherwise, EnvCfg.StmtCfg is copied by value to SrvCfg.StmtCfg. Creating a Ses with srv.OpenSes() will use SesCfg.StmtCfg if it is specified; otherwise, SrvCfg.StmtCfg is copied by value to SesCfg.StmtCfg. Creating a Stmt with ses.Prep() will use SesCfg.StmtCfg if it is specified; otherwise, a new StmtCfg with default values is set on the Stmt. Call Stmt.Cfg() to change a Stmt's configuration. An Env may contain multiple Srv. A Srv may contain multiple Ses. A Ses may contain multiple Stmt. A Stmt may contain multiple Rset. Setting a RsetCfg on a StmtCfg does not cascade through descendent structs. Configuration of Stmt.Cfg takes effect prior to calls to Stmt.Exe and Stmt.Qry; consequently, any updates to Stmt.Cfg after a call to Stmt.Exe or Stmt.Qry are not observed. One configuration scenario may be to set a server's select statements to return nullable Go types by default: Another scenario may be to configure the runes mapped to bool values: Oracle-specific types offered by the ora package are ora.Rset, ora.IntervalYM, ora.IntervalDS, ora.Raw, ora.Lob and ora.Bfile. ora.Rset represents an Oracle SYS_REFCURSOR. ora.IntervalYM represents an Oracle INTERVAL YEAR TO MONTH. ora.IntervalDS represents an Oracle INTERVAL DAY TO SECOND. ora.Raw represents an Oracle RAW or LONG RAW. ora.Lob may represent an Oracle BLOB or Oracle CLOB. And ora.Bfile represents an Oracle BFILE. ROWID columns are returned as strings and don't have a unique Go type. #### LOBs The default for SELECTing [BC]LOB columns is a safe Bin or S, which means all the contents of the LOB is slurped into memory and returned as a []byte or string. If you want more control, you can use ora.L in Prep, Qry or `ses.SetCfg(ses.Cfg().SetBlob(ora.L))`. But keep in mind that Oracle restricts the use of LOBs: it is forbidden to do ANYTHING while reading the LOB! No another query, no exec, no close of the Rset - even *advance* to the next record in the result set is forbidden! Failing to adhere these rules results in "Invalid handle" and ORA-03127 errors. You cannot start reading another LOB till you haven't finished reading the previous LOB, not even in the same row! Failing this results in ORA-24804! For examples, see [z_lob_test.go](z_lob_test.go). #### Rset Rset is used to obtain Go values from a SQL select statement. Methods Rset.Next, Rset.NextRow, and Rset.Len are available. Fields Rset.Row, Rset.Err, Rset.Index, and Rset.ColumnNames are also available. The Next method attempts to load data from an Oracle buffer into Row, returning true when successful. When no data is available, or if an error occurs, Next returns false setting Row to nil. Any error in Next is assigned to Err. Calling Next increments Index and method Len returns the total number of rows processed. The NextRow method is convenient for returning a single row. NextRow calls Next and returns Row. ColumnNames returns the names of columns defined by the SQL select statement. Rset has two usages. Rset may be returned from Stmt.Qry when prepared with a SQL select statement: Or, *Rset may be passed to Stmt.Exe when prepared with a stored procedure accepting an OUT SYS_REFCURSOR parameter: Stored procedures with multiple OUT SYS_REFCURSOR parameters enable a single Exe call to obtain multiple Rsets: The types of values assigned to Row may be configured in StmtCfg.Rset. For configuration to take effect, assign StmtCfg.Rset prior to calling Stmt.Qry or Stmt.Exe. Rset prefetching may be controlled by StmtCfg.PrefetchRowCount and StmtCfg.PrefetchMemorySize. PrefetchRowCount works in coordination with PrefetchMemorySize. When PrefetchRowCount is set to zero only PrefetchMemorySize is used; otherwise, the minimum of PrefetchRowCount and PrefetchMemorySize is used. The default uses a PrefetchMemorySize of 134MB. Opening and closing Rsets is managed internally. Rset does not have an Open method or Close method. IntervalYM may be be inserted and selected: IntervalDS may be be inserted and selected: Transactions on an Oracle server are supported. DML statements auto-commit unless a transaction has started: Ses.PrepAndExe, Ses.PrepAndQry, Ses.Ins, Ses.Upd, and Ses.Sel are convenient one-line methods. Ses.PrepAndExe offers a convenient one-line call to Ses.Prep and Stmt.Exe. Ses.PrepAndQry offers a convenient one-line call to Ses.Prep and Stmt.Qry. Ses.Ins composes, prepares and executes a sql INSERT statement. Ses.Ins is useful when you have to create and maintain a simple INSERT statement with a long list of columns. As table columns are added and dropped over the lifetime of a table Ses.Ins is easy to read and revise. Ses.Upd composes, prepares and executes a sql UPDATE statement. Ses.Upd is useful when you have to create and maintain a simple UPDATE statement with a long list of columns. As table columns are added and dropped over the lifetime of a table Ses.Upd is easy to read and revise. Ses.Sel composes, prepares and queries a sql SELECT statement. Ses.Sel is useful when you have to create and maintain a simple SELECT statement with a long list of columns that have non-default GoColumnTypes. As table columns are added and dropped over the lifetime of a table Ses.Sel is easy to read and revise. The Ses.Ping method checks whether the client's connection to an Oracle server is valid. A call to Ping requires an open Ses. Ping will return a nil error when the connection is fine: The Srv.Version method is available to obtain the Oracle server version. A call to Version requires an open Ses: Further code examples are available in the [example file](https://github.com/rana/ora/blob/master/z_example_test.go), test files and [samples folder](https://github.com/rana/ora/tree/master/samples). The ora package provides a simple ora.Logger interface for logging. Logging is disabled by default. Specify one of three optional built-in logging packages to enable logging; or, use your own logging package. ora.Cfg().Log offers various options to enable or disable logging of specific ora driver methods. For example: To use the standard Go log package: which produces a sample log of: Messages are prefixed with 'ORA I' for information or 'ORA E' for an error. The log package is configured to write to os.Stderr by default. Use the ora/lg.Std type to configure an alternative io.Writer. To use the glog package: which produces a sample log of: To use the log15 package: which produces a sample log of: See https://github.com/rana/ora/tree/master/samples/lg15/main.go for sample code which uses the log15 package. Tests are available and require some setup. Setup varies depending on whether the Oracle server is configured as a container database or non-container database. It's simpler to setup a non-container database. An example for each setup is explained. Non-container test database setup steps: Container test database setup steps: Some helpful SQL maintenance statements: Run the tests. database/sql method Stmt.QueryRow is not supported. Go 1.6 introduced stricter cgo (call C from Go) rules, and introduced runtime checks. This is good, as the possibility of C code corrupting Go code is almost completely eliminated, but it also means a severe call overhead grow. [Sometimes](https://groups.google.com/forum/#!topic/golang-nuts/ccMkPG6Bi5k) this can be 22x the go 1.5.3 call time! So if you need performance more than correctness, start your programs with "GODEBUG=cgocheck=0" environment setting. Copyright 2017 Rana Ian, Tamás Gulácsi. All rights reserved. Use of this source code is governed by The MIT License found in the accompanying LICENSE file.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. - UTF-8 support - Choice of measurement unit, page format and margins - Page header and footer management - Automatic page breaks, line breaks, and text justification - Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images - Colors, gradients and alpha channel transparency - Outline bookmarks - Internal and external links - TrueType, Type1 and encoding support - Page compression - Lines, Bézier curves, arcs, and ellipses - Rotation, scaling, skewing, translation, and mirroring - Clipping - Document protection - Layers - Templates - Barcodes - Charting facility - Import PDFs as templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. gofpdf supports UTF-8 TrueType fonts and “right-to-left” languages. Note that Chinese, Japanese, and Korean characters may not be included in many general purpose fonts. For these languages, a specialized font (for example, NotoSansSC for simplified Chinese) can be used. Also, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. This repository will not be maintained, at least for some unknown duration. But it is hoped that gofpdf has a bright future in the open source world. Due to Go’s promise of compatibility, gofpdf should continue to function without modification for a longer time than would be the case with many other languages. Forks should be based on the last viable commit. Tools such as active-forks can be used to select a fork that looks promising for your needs. If a particular fork looks like it has taken the lead in attracting followers, this README will be updated to point people in that direction. The efforts of all contributors to this project have been deeply appreciated. Best wishes to all of you. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running go test ./... is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you’ll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory and if the third argument to ComparePDFFiles() in internal/example/example.go is true. (By default it is false.) The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). You should use AddUTF8Font() or AddUTF8FontFromBytes() to add a TrueType UTF-8 encoded font. Use RTL() and LTR() methods switch between “right-to-left” and “left-to-right” mode. In order to use a different non-UTF-8 TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run “go build”. This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include Google Fonts and DejaVu Fonts. The draw2d package is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the contrib directory. Here are guidelines for making submissions. Your change should - be compatible with the MIT License - be properly documented - be formatted with go fmt - include an example in fpdf_test.go if appropriate - conform to the standards of golint and go vet, that is, golint . and go vet . should not generate any warnings - not diminish test coverage Pull requests are the preferred means of accepting your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package’s code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Bruno Michel has provided valuable assistance with the code. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image’s extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Dan Meyers added support for embedded JavaScript. David Fish added a generic alias-replacement function to enable, among other things, table of contents functionality. Andy Bakun identified and corrected a problem in which the internal catalogs were not sorted stably. Paul Montag added encoding and decoding functionality for templates, including images that are embedded in templates; this allows templates to be stored independently of gofpdf. Paul also added support for page boxes used in printing PDF documents. Wojciech Matusiak added supported for word spacing. Artem Korotkiy added support of UTF-8 fonts. Dave Barnes added support for imported objects and templates. Brigham Thompson added support for rounded rectangles. Joe Westcott added underline functionality and optimized image storage. Benoit KUGLER contributed support for rectangles with corners of unequal radius, modification times, and for file attachments and annotations. - Remove all legacy code page font support; use UTF-8 exclusively - Improve test coverage as reported by the coverage tool. Example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package cms provides a bare-bones, unoptimized implementation of a content management system.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. - UTF-8 support - Choice of measurement unit, page format and margins - Page header and footer management - Automatic page breaks, line breaks, and text justification - Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images - Colors, gradients and alpha channel transparency - Outline bookmarks - Internal and external links - TrueType, Type1 and encoding support - Page compression - Lines, Bézier curves, arcs, and ellipses - Rotation, scaling, skewing, translation, and mirroring - Clipping - Document protection - Layers - Templates - Barcodes - Charting facility - Import PDFs as templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. gofpdf supports UTF-8 TrueType fonts and “right-to-left” languages. Note that Chinese, Japanese, and Korean characters may not be included in many general purpose fonts. For these languages, a specialized font (for example, NotoSansSC for simplified Chinese) can be used. Also, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. This repository will not be maintained, at least for some unknown duration. But it is hoped that gofpdf has a bright future in the open source world. Due to Go’s promise of compatibility, gofpdf should continue to function without modification for a longer time than would be the case with many other languages. Forks should be based on the last viable commit. Tools such as active-forks can be used to select a fork that looks promising for your needs. If a particular fork looks like it has taken the lead in attracting followers, this README will be updated to point people in that direction. The efforts of all contributors to this project have been deeply appreciated. Best wishes to all of you. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running go test ./... is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you’ll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory and if the third argument to ComparePDFFiles() in internal/example/example.go is true. (By default it is false.) The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). You should use AddUTF8Font() or AddUTF8FontFromBytes() to add a TrueType UTF-8 encoded font. Use RTL() and LTR() methods switch between “right-to-left” and “left-to-right” mode. In order to use a different non-UTF-8 TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run “go build”. This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include Google Fonts and DejaVu Fonts. The draw2d package is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the contrib directory. Here are guidelines for making submissions. Your change should - be compatible with the MIT License - be properly documented - be formatted with go fmt - include an example in fpdf_test.go if appropriate - conform to the standards of golint and go vet, that is, golint . and go vet . should not generate any warnings - not diminish test coverage Pull requests are the preferred means of accepting your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package’s code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Bruno Michel has provided valuable assistance with the code. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image’s extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Dan Meyers added support for embedded JavaScript. David Fish added a generic alias-replacement function to enable, among other things, table of contents functionality. Andy Bakun identified and corrected a problem in which the internal catalogs were not sorted stably. Paul Montag added encoding and decoding functionality for templates, including images that are embedded in templates; this allows templates to be stored independently of gofpdf. Paul also added support for page boxes used in printing PDF documents. Wojciech Matusiak added supported for word spacing. Artem Korotkiy added support of UTF-8 fonts. Dave Barnes added support for imported objects and templates. Brigham Thompson added support for rounded rectangles. Joe Westcott added underline functionality and optimized image storage. Benoit KUGLER contributed support for rectangles with corners of unequal radius, modification times, and for file attachments and annotations. - Remove all legacy code page font support; use UTF-8 exclusively - Improve test coverage as reported by the coverage tool. Example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers • Templates • Barcodes gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. In particular, languages that require more than one code page such as Chinese, Japanese, and Arabic are not currently supported. This is explained in issue 109. However, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test ./..." is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory. The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. The draw2d package (https://github.com/llgcode/draw2d) is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the `contrib` directory. Here are guidelines for making submissions. Your change should • be compatible with the MIT License • be properly documented • be formatted with `go fmt` • include an example in fpdf_test.go if appropriate • conform to the standards of golint (https://github.com/golang/lint) and go vet (https://godoc.org/golang.org/x/tools/cmd/vet), that is, `golint .` and `go vet .` should not generate any warnings • not diminish test coverage (https://blog.golang.org/cover) Pull requests (https://help.github.com/articles/using-pull-requests/) work nicely as a means of contributing your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package's code and documentation are closely derived from the FPDF library (http://www.fpdf.org/) created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Bruno Michel has provided valuable assistance with the code. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool. This example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Portions of this software and almost all of this file are liberally based upon the software written by Ben Johnson in his package "wtf". See: LICENSE and https://github.com/benbjohnson/wtf/ pj is a simple hierarchical content management system meant to be easy and efficient to deploy. Nodes of various types (Page, File, Link) refer to parent nodes within the system, meaning any node can have children. A node may also represent a 'folder'. Every node except the root node must have a name which is unique at its level of the hierarchy. Implementations can construct or "materialize" the full Path to the resource using the ParentID and name at each level of the hierarchy. Conceptually, Nodes with {ID, ParentID, Name} result in Path, e.g.: The provided sqlite implementation materializes Path using triggers on INSERT or UPDATE operations. Should a node be reassigned to another parent, Path is updated accordingly. Retrieving a Node from the system simply requires having its path - "/reports/2023/q1-budget.xls", making access despite the hierarchy as efficient as a key-value store. For example: Portions of this software and almost all of this file are liberally based upon the software written by Ben Johnson in his package "wtf". See: LICENSE and https://github.com/benbjohnson/wtf/

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. - UTF-8 support - Choice of measurement unit, page format and margins - Page header and footer management - Automatic page breaks, line breaks, and text justification - Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images - Colors, gradients and alpha channel transparency - Outline bookmarks - Internal and external links - TrueType, Type1 and encoding support - Page compression - Lines, Bézier curves, arcs, and ellipses - Rotation, scaling, skewing, translation, and mirroring - Clipping - Document protection - Layers - Templates - Barcodes - Charting facility - Import PDFs as templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. gofpdf supports UTF-8 TrueType fonts and “right-to-left” languages. Note that Chinese, Japanese, and Korean characters may not be included in many general purpose fonts. For these languages, a specialized font (for example, NotoSansSC for simplified Chinese) can be used. Also, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. This repository will not be maintained, at least for some unknown duration. But it is hoped that gofpdf has a bright future in the open source world. Due to Go’s promise of compatibility, gofpdf should continue to function without modification for a longer time than would be the case with many other languages. Forks should be based on the last viable commit. Tools such as active-forks can be used to select a fork that looks promising for your needs. If a particular fork looks like it has taken the lead in attracting followers, this README will be updated to point people in that direction. The efforts of all contributors to this project have been deeply appreciated. Best wishes to all of you. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running go test ./... is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you’ll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory and if the third argument to ComparePDFFiles() in internal/example/example.go is true. (By default it is false.) The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). You should use AddUTF8Font() or AddUTF8FontFromBytes() to add a TrueType UTF-8 encoded font. Use RTL() and LTR() methods switch between “right-to-left” and “left-to-right” mode. In order to use a different non-UTF-8 TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run “go build”. This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include Google Fonts and DejaVu Fonts. The draw2d package is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the contrib directory. Here are guidelines for making submissions. Your change should - be compatible with the MIT License - be properly documented - be formatted with go fmt - include an example in fpdf_test.go if appropriate - conform to the standards of golint and go vet, that is, golint . and go vet . should not generate any warnings - not diminish test coverage Pull requests are the preferred means of accepting your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package’s code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Bruno Michel has provided valuable assistance with the code. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image’s extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Dan Meyers added support for embedded JavaScript. David Fish added a generic alias-replacement function to enable, among other things, table of contents functionality. Andy Bakun identified and corrected a problem in which the internal catalogs were not sorted stably. Paul Montag added encoding and decoding functionality for templates, including images that are embedded in templates; this allows templates to be stored independently of gofpdf. Paul also added support for page boxes used in printing PDF documents. Wojciech Matusiak added supported for word spacing. Artem Korotkiy added support of UTF-8 fonts. Dave Barnes added support for imported objects and templates. Brigham Thompson added support for rounded rectangles. Joe Westcott added underline functionality and optimized image storage. Benoit KUGLER contributed support for rectangles with corners of unequal radius, modification times, and for file attachments and annotations. - Remove all legacy code page font support; use UTF-8 exclusively - Improve test coverage as reported by the coverage tool. Example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License. "Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity. "You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License. "Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files. "Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types. "Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below). "Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof. "Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution." "Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work. 2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. 3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed. 4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions: (a) You must give any other recipients of the Work or (b) You must cause any modified files to carry prominent notices (c) You must retain, in the Source form of any Derivative Works (d) If the Work includes a "NOTICE" text file as part of its You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License. 5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions. 6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file. 7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License. 8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages. 9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability. Copyright 2020 Lenses.io Ltd. Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Package contentstore is for storing small to medium number of content-addresable blobs ([]byte). You can store a []blob of data in the store and retrieve it back using the returned unique id (which is a sha1 of the content, but that's implementation detail). The data is de-duplicated (i.e. storing the same blob for the second time is a no-op). You cannot delete the data. It would be possible to implement but I haven't. Where and why should you use content store? Imagine any kind of content management system (a blog, a wiki, a forum). It needs to store user posts, maybe uploaded images etc. Each piece of content is a blob. You could store blobs in the database but it's much better to store them in the filesystem. It's fast, simple and therefore reliable. The simplest implementation would be to store each blob in a single file and using e.g. sha1 of the content as file name. It gives you content de-duplication for free. It works but creates a lot of files which doesn't scale well past relatively small (thousands) number of blobs. The filesystem has no problem storing even millions of files (if you partition them intelligently into directories) but e.g. a simple backup to s3 requires re-scanning all the files and re-checking if they exist in s3. It's not the fastest process. This package improves on that by storing multiple blobs in a single, append-only file. This significantly reduces number of files created (and you can control how big a single file can get). It's sheer elegance in its simplicity.

Package config implements a configuration server using git and zookeeper. Besides maintaining structured data describing how systems should work together, a good configuration server needs to have the following characteristics: 1. Version control. Should be able to revert to a previous version shall there be any error after a push. 2. Fast, simple, and reliable notification to thousands or tens of thousands servers. 3. Flexible to describe complex systems. 4. Ease of use For the above reasons, we chose to implement our config system with two components that are already widely used with a rock solid foundation: git, and zookeeper. It is easy to see that git can handle require 1, 3, and 4, while zookeeper satisfies 2, and 4. The system works as follows: 1. Configurations are stored in a git repo. You can have one file for the whole systems, or you can have hundreds or thousands of files each detailing a part of the whole system. It doesn't matter. The config system deal with repo, and its commits. The sysadmin maintain the repo using whatever git tool he/she choose. Changes to the git repo are not saved to config system. So just use it as a normal repo, branch, edit, etc as you would for a normal repo. 2. For changes to be pushed to our config system, you need to call csi/service/config/pusher/pusher. pusher works on the HEAD of the repo. Whatever you have checked out, when pusher is called, will be pushed onto config system. pusher will update data in a zookeeper ensemble that acts as the persistent, and notification layer. When pusher is called, it is given a root path, which is the root path for the configuration information. This way, it is ok if you just dedicate a subdirectory of your repo for configuration, instead of dedicating a completely new one. All descendent files of the root directory will be saved onto zookeeper, e.g. a/b/c/d will be set in zookeeper as znode a/b/c/d where the content of znode a/b/c/d is the content of file a/b/c/d. Additionally, pusher will collect repo and commit info, encode them in a json structure and store it in the root znode for this configuration system. The json structure contains repo name, branch name, last commit hash, committer email, timestamp, and a files modified in the last commit. 3. The information stored in step 2 on the root znode is important. It allows a client of the configuration system to just listen to one znode, and gets notified of not only a change has happened, but what file(s) got changed, and decided whether or not it should update. This job is done by csi/service/config/client.go. Client.go allows one to register to receive event on any file change. 4. Pusher requires "git" to be in the PATH, as it calls git related command extensively. The following is a list of git commands that pusher uses to find out various repo related info: # show repo name 00:57 $ basename `git rev-parse --show-toplevel` csi # show HEAD branch name 00:56 $ git rev-parse --abbrev-ref HEAD master # show HEAD commit hash 00:54 $ git rev-parse HEAD 6e390e716805599f8f694a5f654649d92ec638f6 # show files affected in a commit 01:02 $ git diff-tree --no-commit-id --name-status -r 6e390e716805599f8f694a5f654649d92ec638f6 common/types/user/login_record.pb.go external/oauth/cache.go make_go.sh pp/frontend/main.go ..... # get timestamp, committer email and subject of a commit 03:03 $ git show --pretty="format:%at:%ce:%s" 6e390e716805599f8f694a5f654649d92ec638f6 | head -n 1 1394199814:alien_lien@htc.com:Add 1) Account Manager and 2) User Management Service 5. Client can listen on the configuration change with a regex string that specifies which files it is interested. It will be notified when any of files that matches the regex has changed. Note: this is achieved by regex match the changed files in the commit log with is published to the root znode.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. However, support is provided to translate UTF-8 runes to code page encodings. This package's code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Bruno Michel has provided valuable assistance with the code. The FPDF website is http://www.fpdf.org/. gofpdf is copyrighted by Kurt Jung and is released under the MIT License. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF. See the tutorials in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test" is the production of the tutorial PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these tutorials run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example docWriter and strDelimit. In particular, docWriter is used as an argument to OutputAndClose in order to reduce the boilerplate in each example. In practice, you may be better served by calling OutputFileAndClose(). Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. See tutorial 7 for an example. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. - UTF-8 support - Choice of measurement unit, page format and margins - Page header and footer management - Automatic page breaks, line breaks, and text justification - Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images - Colors, gradients and alpha channel transparency - Outline bookmarks - Internal and external links - TrueType, Type1 and encoding support - Page compression - Lines, Bézier curves, arcs, and ellipses - Rotation, scaling, skewing, translation, and mirroring - Clipping - Document protection - Layers - Templates - Barcodes - Charting facility - Import PDFs as templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. gofpdf supports UTF-8 TrueType fonts and “right-to-left” languages. Note that Chinese, Japanese, and Korean characters may not be included in many general purpose fonts. For these languages, a specialized font (for example, NotoSansSC for simplified Chinese) can be used. Also, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. This repository will not be maintained, at least for some unknown duration. But it is hoped that gofpdf has a bright future in the open source world. Due to Go’s promise of compatibility, gofpdf should continue to function without modification for a longer time than would be the case with many other languages. Forks should be based on the last viable commit. Tools such as active-forks can be used to select a fork that looks promising for your needs. If a particular fork looks like it has taken the lead in attracting followers, this README will be updated to point people in that direction. The efforts of all contributors to this project have been deeply appreciated. Best wishes to all of you. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running go test ./... is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you’ll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory and if the third argument to ComparePDFFiles() in internal/example/example.go is true. (By default it is false.) The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). You should use AddUTF8Font() or AddUTF8FontFromBytes() to add a TrueType UTF-8 encoded font. Use RTL() and LTR() methods switch between “right-to-left” and “left-to-right” mode. In order to use a different non-UTF-8 TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run “go build”. This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include Google Fonts and DejaVu Fonts. The draw2d package is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the contrib directory. Here are guidelines for making submissions. Your change should - be compatible with the MIT License - be properly documented - be formatted with go fmt - include an example in fpdf_test.go if appropriate - conform to the standards of golint and go vet, that is, golint . and go vet . should not generate any warnings - not diminish test coverage Pull requests are the preferred means of accepting your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package’s code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Bruno Michel has provided valuable assistance with the code. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image’s extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Dan Meyers added support for embedded JavaScript. David Fish added a generic alias-replacement function to enable, among other things, table of contents functionality. Andy Bakun identified and corrected a problem in which the internal catalogs were not sorted stably. Paul Montag added encoding and decoding functionality for templates, including images that are embedded in templates; this allows templates to be stored independently of gofpdf. Paul also added support for page boxes used in printing PDF documents. Wojciech Matusiak added supported for word spacing. Artem Korotkiy added support of UTF-8 fonts. Dave Barnes added support for imported objects and templates. Brigham Thompson added support for rounded rectangles. Joe Westcott added underline functionality and optimized image storage. Benoit KUGLER contributed support for rectangles with corners of unequal radius, modification times, and for file attachments and annotations. - Remove all legacy code page font support; use UTF-8 exclusively - Improve test coverage as reported by the coverage tool. Example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

A dynamic and extensible music library organizer Demlo is a music library organizer. It can encode, fix case, change folder hierarchy according to tags or file properties, tag from an online database, copy covers while ignoring duplicates or those below a quality threshold, and much more. It makes it possible to manage your libraries uniformly and dynamically. You can write your own rules to fit your needs best. Demlo aims at being as lightweight and portable as possible. Its major runtime dependency is the transcoder FFmpeg. The scripts are written in Lua for portability and speed while allowing virtually unlimited extensibility. Usage: For usage options, see: First Demlo creates a list of all input files. When a folder is specified, all files matching the extensions from the 'extensions' variable will be appended to the list. Identical files are appended only once. Next all files get analyzed: - The audio file details (tags, stream properties, format properties, etc.) are stored into the 'input' variable. The 'output' variable gets its default values from 'input', or from an index file if specified from command-line. If no index has been specified and if an attached cuesheet is found, all cuesheet details are appended accordingly. Cuesheet tags override stream tags, which override format tags. Finally, still without index, tags can be retrieved from Internet if the command-line option is set. - If a prescript has been specified, it gets executed. It makes it possible to adjust the input values and global variables before running the other scripts. - The scripts, if any, get executed in the lexicographic order of their basename. The 'output' variable is transformed accordingly. Scripts may contain rules such as defining a new file name, new tags, new encoding properties, etc. You can use conditions on input values to set the output properties, which makes it virtually possible to process a full music library in one single run. - If a postscript has been specified, it gets executed. It makes it possible to adjust the output of the script for the current run only. - Demlo makes some last-minute tweaking if need be: it adjusts the bitrate, the path, the encoding parameters, and so on. - A preview of changes is displayed. - When applying changes, the covers get copied if required and the audio file gets processed: tags are modified as specified, the file is re-encoded if required, and the output is written to the appropriate folder. When destination already exists, the 'exist' action is executed. The program's default behaviour can be changed from the user configuration file. (See the 'Files' section for a template.) Most command-line flags default value can be changed. The configuration file is loaded on startup, before parsing the command-line options. Review the default value of the CLI flags with 'demlo -h'. If you wish to use no configuration file, set the environment variable DEMLORC to ".". Scripts can contain any safe Lua code. Some functions like 'os.execute' are not available for security reasons. It is not possible to print to the standard output/error unless running in debug mode and using the 'debug' function. See the 'sandbox.go' file for a list of allowed functions and variables. Lua patterns are replaced by Go regexps. See https://github.com/google/re2/wiki/Syntax. Scripts have no requirements at all. However, to be useful, they should set values of the 'output' table detailed in the 'Variables' section. You can use the full power of the Lua to set the variables dynamically. For instance: 'input' and 'output' are both accessible from any script. All default functions and variables (excluding 'output') are reset on every script call to enforce consistency. Local variables are lost from one script call to another. Global variables are preserved. Use this feature to pass data like options or new functions. 'output' structure consistency is guaranteed at the start of every script. Demlo will only extract the fields with the right type as described in the 'Variables' section. Warning: Do not abuse of global variables, especially when processing non-fixed size data (e.g. tables). Data could grow big and slow down the program. By default, when the destination exists, Demlo will append a suffix to the output destination. This behaviour can be changed from the 'exist' action specified by the user. Demlo comes with a few default actions. The 'exist' action works just like scripts with the following differences: - Any change to 'output.path' will be skipped. - An additional variable is accessible from the action: 'existinfo' holds the file details of the existing files in the same fashion as 'input'. This allows for comparing the input file and the existing destination. The writing rules can be tweaked the following way: Word of caution: overwriting breaks Demlo's rule of not altering existing files. It can lead to undesired results if the overwritten file is also part of the (yet to be processed) input. The overwrite capability can be useful when syncing music libraries however. The user scripts should be generic. Therefore they may not properly handle some uncommon input values. Tweak the input with temporary overrides from command-line. The prescript and postscript defined on command-line will let you run arbitrary code that is run before and after all other scripts, respectively. Use global variables to transfer data and parameters along. If the prescript and postscript end up being too long, consider writing a demlo script. You can also define shell aliases or use wrapper scripts as convenience. The 'input' table describes the file: Bitrate is in bits per seconds (bps). That is, for 320 kbps you would specify The 'time' is the modification time of the file. It holds the sec seconds and nsec nanoseconds since January 1, 1970 UTC. The entry 'streams' and 'format' are as returned by It gives access to most metadata that FFmpeg can return. For instance, to get the duration of the track in seconds, query the variable 'input.format.duration'. Since there may be more than one stream (covers, other data), the first audio stream is assumed to be the music stream. For convenience, the index of the music stream is stored in 'audioindex'. The tags returned by FFmpeg are found in streams, format and in the cuesheet. To make tag queries easier, all tags are stored in the 'tags' table, with the following precedence: You can remove a tag by setting it to 'nil' or the empty string. This is equivalent, except that 'nil' saves some memory during the process. The 'output' table describes the transformation to apply to the file: The 'parameters' array holds the CLI parameters passed to FFmpeg. It can be anything supported by FFmpeg, although this variable is supposed to hold encoding information. See the 'Examples' section. The 'embeddedcovers', 'externalcovers' and 'onlinecover' variables are detailed in the 'Covers' section. The 'write' variable is covered in the 'Existing destination' section. The 'rmsrc' variable is a boolean: when true, Demlo removes the source file after processing. This can speed up the process when not re-encoding. This option is ignored for multi-track files. For convenience, the following shortcuts are provided: Demlo provides some non-standard Lua functions to ease scripting. Display a message on stderr if debug mode is on. Return lowercase string without non-alphanumeric characters nor leading zeros. Return the relation coefficient of the two input strings. The result is a float in 0.0...1.0, 0.0 means no relation at all, 1.0 means identical strings. A format is a container in FFmpeg's terminology. 'output.parameters' contains CLI flags passed to FFmpeg. They are meant to set the stream codec, the bitrate, etc. If 'output.parameters' is {'-c:a', 'copy'} and the format is identical, then taglib will be used instead of FFmpeg. Use this rule from a (post)script to disable encoding by setting the same format and the copy parameters. This speeds up the process. The official scripts are usually very smart at guessing the right values. They might make mistakes however. If you are unsure, you can (and you are advised to) preview the results before proceeding. The 'diff' preview is printed to stderr. A JSON preview of the changes is printed to stdout if stdout is redirected. The initial values of the 'output' table can be completed with tags fetched from the MusicBrainz database. Audio files are fingerprinted for the queries, so even with initially wrong file names and tags, the right values should still be retrieved. The front album cover can also be retrieved. Proxy parameters will be fetched automatically from the 'http_proxy' and 'https_proxy' environment variables. As this process requires network access it can be quite slow. Nevertheless, Demlo is specifically optimized for albums, so that network queries are used for only one track per album, when possible. Some tracks can be released on different albums: Demlo tries to guess it from the tags, but if the tags are wrong there is no way to know which one it is. There is a case where the selection can be controlled: let's assume we have tracks A, B and C from the same album Z. A and B were also released in album Y, whereas C was release in Z only. Tags for A will be checked online; let's assume it gets tagged to album Y. B will use A details, so album Y too. Then C does not match neither A's nor B's album, so another online query will be made and it will be tagged to album Z. This is slow and does not yield the expected result. Now let's call Tags for C will be queried online, and C will be tagged to Z. Then both A and B will match album Z so they will be tagged using C details, which is the desired result. Conclusion: when using online tagging, the first argument should be the lesser known track of the album. Demlo can set the output variables according to the values set in a text file before calling the script. The input values are ignored as well as online tagging, but it is still possible to access the input table from scripts. This 'index' file is formatted in JSON. It corresponds to what Demlo outputs when printing the JSON preview. This is valid JSON except for the missing beginning and the missing end. It makes it possible to concatenate and to append to existing index files. Demlo will automatically complete the missing parts so that it becomes valid JSON. The index file is useful when you want to edit tags manually: You can redirect the output to a file, edit the content manually with your favorite text editor, then run Demlo again with the index as argument. See the 'Examples' section. This feature can also be used to interface Demlo with other programs. Demlo can manage embedded covers as well as external covers. External covers are queried from files matching known extensions in the file's folder. Embedded covers are queried from static video streams in the file. Covers are accessed from The embedded covers are indexed numerically by order of appearance in the streams. The first cover will be at index 1 and so on. This is not necessarily the index of the stream. 'inputcover' is the following structure: 'format' is the picture format. FFmpeg makes a distinction between format and codec, but it is not useful for covers. The name of the format is specified by Demlo, not by FFmpeg. Hence the 'jpeg' name, instead of 'mjpeg' as FFmpeg puts it. 'width' and 'height' hold the size in pixels. 'checksum' can be used to identify files uniquely. For performance reasons, only a partial checksum is performed. This variable is typically used for skipping duplicates. Cover transformations are specified in 'outputcover' has the following structure: The format is specified by FFmpeg this time. See the comments on 'format' for 'inputcover'. 'parameters' is used in the same fashion as 'output.parameters'. User configuration: This must be a Lua file. See the 'demlorc' file provided with this package for an exhaustive list of options. Folder containing the official scripts: User script folder: Create this folder and add your own scripts inside. This folder takes precedence over the system folder, so scripts with the same name will be found in the user folder first. The following examples will not proceed unless the '-p' command-line option is true. Important: you _must_ use single quotes for the runtime Lua command to prevent expansion. Inside the Lua code, use double quotes for strings and escape single quotes. Show default options: Preview changes made by the default scripts: Use 'alternate' script if found in user or system script folder (user folder first): Add the Lua file to the list of scripts. This feature is convenient if you want to write scripts that are too complex to fit on the command-line, but not generic enough to fit the user or system script folders. Remove all script from the list, then add '30-case' and '60-path' scripts. Note that '30-case' will be run before '60-path'. Do not use any script but '60-path'. The file content is unchanged and the file is renamed to a dynamically computed destination. Demlo performs an instant rename if destination is on the same device. Otherwise it copies the file and removes the source. Use the default scripts (if set in configuration file), but do not re-encode: Set 'artist' to the value of 'composer', and 'title' to be preceded by the new value of 'artist', then apply the default script. Do not re-encode. Order in runtime script matters. Mind the double quotes. Set track number to first number in input file name: Use the default scripts but keep original value for the 'artist' tag: 1) Preview default scripts transformation and save it to an index. 2) Edit file to fix any potential mistake. 3) Run Demlo over the same files using the index information only. Same as above but generate output filename according to the custom '61-rename' script. The numeric prefix is important: it ensures that '61-rename' will be run after all the default tag related scripts and after '60-path'. Otherwise, if a change in tags would occur later on, it would not affect the renaming script. Retrieve tags from Internet: Same as above but for a whole album, and saving the result to an index: Only download the cover for the album corresponding to the track. Use 'rmsrc' to avoid duplicating the audio file. Change tags inplace with entries from MusicBrainz: Set tags to titlecase while casing AC-DC correctly: To easily switch between formats from command-line, create one script per format (see 50-encoding.lua), e.g. ogg.lua and flac.lua. Then Add support for non-default formats from CLI: Overwrite existing destination if input is newer: ffmpeg(1), ffprobe(1), http://www.lua.org/pil/contents.html

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. - UTF-8 support - Choice of measurement unit, page format and margins - Page header and footer management - Automatic page breaks, line breaks, and text justification - Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images - Colors, gradients and alpha channel transparency - Outline bookmarks - Internal and external links - TrueType, Type1 and encoding support - Page compression - Lines, Bézier curves, arcs, and ellipses - Rotation, scaling, skewing, translation, and mirroring - Clipping - Document protection - Layers - Templates - Barcodes - Charting facility - Import PDFs as templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. gofpdf supports UTF-8 TrueType fonts and “right-to-left” languages. Note that Chinese, Japanese, and Korean characters may not be included in many general purpose fonts. For these languages, a specialized font (for example, NotoSansSC for simplified Chinese) can be used. Also, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running go test ./... is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you’ll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory and if the third argument to ComparePDFFiles() in internal/example/example.go is true. (By default it is false.) The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). You should use AddUTF8Font() or AddUTF8FontFromBytes() to add a TrueType UTF-8 encoded font. Use RTL() and LTR() methods switch between “right-to-left” and “left-to-right” mode. In order to use a different non-UTF-8 TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run “go build”. This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include Google Fonts and DejaVu Fonts. The draw2d package is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the contrib directory. Here are guidelines for making submissions. Your change should - be compatible with the MIT License - be properly documented - be formatted with go fmt - include an example in fpdf_test.go if appropriate - conform to the standards of golint and go vet, that is, golint . and go vet . should not generate any warnings - not diminish test coverage Pull requests are the preferred means of accepting your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package’s code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Bruno Michel has provided valuable assistance with the code. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image’s extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Dan Meyers added support for embedded JavaScript. David Fish added a generic alias-replacement function to enable, among other things, table of contents functionality. Andy Bakun identified and corrected a problem in which the internal catalogs were not sorted stably. Paul Montag added encoding and decoding functionality for templates, including images that are embedded in templates; this allows templates to be stored independently of gofpdf. Paul also added support for page boxes used in printing PDF documents. Wojciech Matusiak added supported for word spacing. Artem Korotkiy added support of UTF-8 fonts. Dave Barnes added support for imported objects and templates. Brigham Thompson added support for rounded rectangles. Joe Westcott added underline functionality and optimized image storage. Benoit KUGLER contributed support for rectangles with corners of unequal radius, modification times, and for file attachments and annotations. - Remove all legacy code page font support; use UTF-8 exclusively - Improve test coverage as reported by the coverage tool. Example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers • Templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. However, support is provided to translate UTF-8 runes to code page encodings. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test ./..." is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory. The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. The draw2d package (https://github.com/llgcode/draw2d) is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the `contrib` directory. Here are guidelines for making submissions. Your change should • be compatible with the MIT License • be properly documented • be formatted with `go fmt` • include an example in fpdf_test.go if appropriate • conform to the standards of golint (https://github.com/golang/lint) and go vet (https://godoc.org/golang.org/x/tools/cmd/vet), that is, `golint .` and `go vet .` should not generate any warnings • not diminish test coverage (https://blog.golang.org/cover) Pull requests (https://help.github.com/articles/using-pull-requests/) work nicely as a means of contributing your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package's code and documentation are closely derived from the FPDF library (http://www.fpdf.org/) created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Additionally, he augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Bruno Michel has provided valuable assistance with the code. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool. This example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. However, support is provided to translate UTF-8 runes to code page encodings. This package's code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Bruno Michel has provided valuable assistance with the code. The FPDF website is http://www.fpdf.org/. gofpdf is copyrighted by Kurt Jung and is released under the MIT License. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF. See the tutorials in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test" is the production of the tutorial PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. See tutorial 7 for an example. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. However, support is provided to translate UTF-8 runes to code page encodings. This package's code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Bruno Michel has provided valuable assistance with the code. The FPDF website is http://www.fpdf.org/. gofpdf is copyrighted by Kurt Jung and is released under the MIT License. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF. See the tutorials in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test" is the production of the tutorial PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these tutorials run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example docWriter and strDelimit. In particular, docWriter is used as an argument to OutputAndClose in order to reduce the boilerplate in each example. In practice, you may be better served by calling OutputFileAndClose(). Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. See tutorial 7 for an example. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers • Templates • Barcodes gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. In particular, languages that require more than one code page such as Chinese, Japanese, and Arabic are not currently supported. This is explained in issue 109. However, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test ./..." is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory. The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. The draw2d package (https://github.com/llgcode/draw2d) is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the `contrib` directory. Here are guidelines for making submissions. Your change should • be compatible with the MIT License • be properly documented • be formatted with `go fmt` • include an example in fpdf_test.go if appropriate • conform to the standards of golint (https://github.com/golang/lint) and go vet (https://godoc.org/golang.org/x/tools/cmd/vet), that is, `golint .` and `go vet .` should not generate any warnings • not diminish test coverage (https://blog.golang.org/cover) Pull requests (https://help.github.com/articles/using-pull-requests/) work nicely as a means of contributing your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package's code and documentation are closely derived from the FPDF library (http://www.fpdf.org/) created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Bruno Michel has provided valuable assistance with the code. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool. This example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. - UTF-8 support - Choice of measurement unit, page format and margins - Page header and footer management - Automatic page breaks, line breaks, and text justification - Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images - Colors, gradients and alpha channel transparency - Outline bookmarks - Internal and external links - TrueType, Type1 and encoding support - Page compression - Lines, Bézier curves, arcs, and ellipses - Rotation, scaling, skewing, translation, and mirroring - Clipping - Document protection - Layers - Templates - Barcodes - Charting facility - Import PDFs as templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. gofpdf supports UTF-8 TrueType fonts and “right-to-left” languages. Note that Chinese, Japanese, and Korean characters may not be included in many general purpose fonts. For these languages, a specialized font (for example, NotoSansSC for simplified Chinese) can be used. Also, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. This repository will not be maintained, at least for some unknown duration. But it is hoped that gofpdf has a bright future in the open source world. Due to Go’s promise of compatibility, gofpdf should continue to function without modification for a longer time than would be the case with many other languages. Forks should be based on the last viable commit. Tools such as active-forks can be used to select a fork that looks promising for your needs. If a particular fork looks like it has taken the lead in attracting followers, this README will be updated to point people in that direction. The efforts of all contributors to this project have been deeply appreciated. Best wishes to all of you. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running go test ./... is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you’ll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory and if the third argument to ComparePDFFiles() in internal/example/example.go is true. (By default it is false.) The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). You should use AddUTF8Font() or AddUTF8FontFromBytes() to add a TrueType UTF-8 encoded font. Use RTL() and LTR() methods switch between “right-to-left” and “left-to-right” mode. In order to use a different non-UTF-8 TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run “go build”. This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include Google Fonts and DejaVu Fonts. The draw2d package is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the contrib directory. Here are guidelines for making submissions. Your change should - be compatible with the MIT License - be properly documented - be formatted with go fmt - include an example in fpdf_test.go if appropriate - conform to the standards of golint and go vet, that is, golint . and go vet . should not generate any warnings - not diminish test coverage Pull requests are the preferred means of accepting your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package’s code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Bruno Michel has provided valuable assistance with the code. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image’s extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Dan Meyers added support for embedded JavaScript. David Fish added a generic alias-replacement function to enable, among other things, table of contents functionality. Andy Bakun identified and corrected a problem in which the internal catalogs were not sorted stably. Paul Montag added encoding and decoding functionality for templates, including images that are embedded in templates; this allows templates to be stored independently of gofpdf. Paul also added support for page boxes used in printing PDF documents. Wojciech Matusiak added supported for word spacing. Artem Korotkiy added support of UTF-8 fonts. Dave Barnes added support for imported objects and templates. Brigham Thompson added support for rounded rectangles. Joe Westcott added underline functionality and optimized image storage. Benoit KUGLER contributed support for rectangles with corners of unequal radius, modification times, and for file attachments and annotations. - Remove all legacy code page font support; use UTF-8 exclusively - Improve test coverage as reported by the coverage tool. Example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers • Templates • Barcodes gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. In particular, languages that require more than one code page such as Chinese, Japanese, and Arabic are not currently supported. This is explained in issue 109. However, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test ./..." is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory. The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. The draw2d package (https://github.com/llgcode/draw2d) is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the `contrib` directory. Here are guidelines for making submissions. Your change should • be compatible with the MIT License • be properly documented • be formatted with `go fmt` • include an example in fpdf_test.go if appropriate • conform to the standards of golint (https://github.com/golang/lint) and go vet (https://godoc.org/golang.org/x/tools/cmd/vet), that is, `golint .` and `go vet .` should not generate any warnings • not diminish test coverage (https://blog.golang.org/cover) Pull requests (https://help.github.com/articles/using-pull-requests/) work nicely as a means of contributing your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package's code and documentation are closely derived from the FPDF library (http://www.fpdf.org/) created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Bruno Michel has provided valuable assistance with the code. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool. This example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. - UTF-8 support - Choice of measurement unit, page format and margins - Page header and footer management - Automatic page breaks, line breaks, and text justification - Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images - Colors, gradients and alpha channel transparency - Outline bookmarks - Internal and external links - TrueType, Type1 and encoding support - Page compression - Lines, Bézier curves, arcs, and ellipses - Rotation, scaling, skewing, translation, and mirroring - Clipping - Document protection - Layers - Templates - Barcodes - Charting facility - Import PDFs as templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. gofpdf supports UTF-8 TrueType fonts and “right-to-left” languages. Note that Chinese, Japanese, and Korean characters may not be included in many general purpose fonts. For these languages, a specialized font (for example, NotoSansSC for simplified Chinese) can be used. Also, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. This repository will not be maintained, at least for some unknown duration. But it is hoped that gofpdf has a bright future in the open source world. Due to Go’s promise of compatibility, gofpdf should continue to function without modification for a longer time than would be the case with many other languages. Forks should be based on the last viable commit. Tools such as active-forks can be used to select a fork that looks promising for your needs. If a particular fork looks like it has taken the lead in attracting followers, this README will be updated to point people in that direction. The efforts of all contributors to this project have been deeply appreciated. Best wishes to all of you. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running go test ./... is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you’ll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory and if the third argument to ComparePDFFiles() in internal/example/example.go is true. (By default it is false.) The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). You should use AddUTF8Font() or AddUTF8FontFromBytes() to add a TrueType UTF-8 encoded font. Use RTL() and LTR() methods switch between “right-to-left” and “left-to-right” mode. In order to use a different non-UTF-8 TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run “go build”. This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include Google Fonts and DejaVu Fonts. The draw2d package is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the contrib directory. Here are guidelines for making submissions. Your change should - be compatible with the MIT License - be properly documented - be formatted with go fmt - include an example in fpdf_test.go if appropriate - conform to the standards of golint and go vet, that is, golint . and go vet . should not generate any warnings - not diminish test coverage Pull requests are the preferred means of accepting your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package’s code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Bruno Michel has provided valuable assistance with the code. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image’s extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Dan Meyers added support for embedded JavaScript. David Fish added a generic alias-replacement function to enable, among other things, table of contents functionality. Andy Bakun identified and corrected a problem in which the internal catalogs were not sorted stably. Paul Montag added encoding and decoding functionality for templates, including images that are embedded in templates; this allows templates to be stored independently of gofpdf. Paul also added support for page boxes used in printing PDF documents. Wojciech Matusiak added supported for word spacing. Artem Korotkiy added support of UTF-8 fonts. Dave Barnes added support for imported objects and templates. Brigham Thompson added support for rounded rectangles. Joe Westcott added underline functionality and optimized image storage. Benoit KUGLER contributed support for rectangles with corners of unequal radius, modification times, and for file attachments and annotations. - Remove all legacy code page font support; use UTF-8 exclusively - Improve test coverage as reported by the coverage tool. Example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers • Templates • Barcodes gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. In particular, languages that require more than one code page such as Chinese, Japanese, and Arabic are not currently supported. This is explained in issue 109. However, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test ./..." is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory. The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. The draw2d package (https://github.com/llgcode/draw2d) is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the `contrib` directory. Here are guidelines for making submissions. Your change should • be compatible with the MIT License • be properly documented • be formatted with `go fmt` • include an example in fpdf_test.go if appropriate • conform to the standards of golint (https://github.com/golang/lint) and go vet (https://godoc.org/golang.org/x/tools/cmd/vet), that is, `golint .` and `go vet .` should not generate any warnings • not diminish test coverage (https://blog.golang.org/cover) Pull requests (https://help.github.com/articles/using-pull-requests/) work nicely as a means of contributing your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package's code and documentation are closely derived from the FPDF library (http://www.fpdf.org/) created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Bruno Michel has provided valuable assistance with the code. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool. This example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers • Templates • Barcodes gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. In particular, languages that require more than one code page such as Chinese, Japanese, and Arabic are not currently supported. This is explained in issue 109. However, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test ./..." is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory. The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. The draw2d package (https://github.com/llgcode/draw2d) is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the `contrib` directory. Here are guidelines for making submissions. Your change should • be compatible with the MIT License • be properly documented • be formatted with `go fmt` • include an example in fpdf_test.go if appropriate • conform to the standards of golint (https://github.com/golang/lint) and go vet (https://godoc.org/golang.org/x/tools/cmd/vet), that is, `golint .` and `go vet .` should not generate any warnings • not diminish test coverage (https://blog.golang.org/cover) Pull requests (https://help.github.com/articles/using-pull-requests/) work nicely as a means of contributing your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package's code and documentation are closely derived from the FPDF library (http://www.fpdf.org/) created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Bruno Michel has provided valuable assistance with the code. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool. This example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers • Templates • Barcodes gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. In particular, languages that require more than one code page such as Chinese, Japanese, and Arabic are not currently supported. This is explained in issue 109. However, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test ./..." is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory. The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. The draw2d package (https://github.com/llgcode/draw2d) is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the `contrib` directory. Here are guidelines for making submissions. Your change should • be compatible with the MIT License • be properly documented • be formatted with `go fmt` • include an example in fpdf_test.go if appropriate • conform to the standards of golint (https://github.com/golang/lint) and go vet (https://godoc.org/golang.org/x/tools/cmd/vet), that is, `golint .` and `go vet .` should not generate any warnings • not diminish test coverage (https://blog.golang.org/cover) Pull requests (https://help.github.com/articles/using-pull-requests/) work nicely as a means of contributing your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package's code and documentation are closely derived from the FPDF library (http://www.fpdf.org/) created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Bruno Michel has provided valuable assistance with the code. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool. This example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package metric implements the OpenTelemetry metric.Meter API. The SDK supports configurable metrics export behavior through a collection of export interfaces that support various export strategies, described below. The metric.Meter API consists of methods for constructing each of the basic kinds of metric instrument. There are six types of instrument available to the end user, comprised of three basic kinds of metric instrument (Counter, Measure, Observer) crossed with two kinds of number (int64, float64). The API assists the SDK by consolidating the variety of metric instruments into a narrower interface, allowing the SDK to avoid repetition of boilerplate. The API and SDK are separated such that an event reaching the SDK has a uniform structure: an instrument, a label set, and a numerical value. To this end, the API uses a core.Number type to represent either an int64 or a float64, depending on the instrument's definition. A single implementation interface is used for counter and measure instruments, metric.InstrumentImpl, and a single implementation interface is used for their handles, metric.HandleImpl. For observers, the API defines interfaces, for which the SDK provides an implementation. There are four entry points for events in the Metrics API - three for synchronous instruments (counters and measures) and one for asynchronous instruments (observers). The entry points for synchronous instruments are: via instrument handles, via direct instrument calls, and via BatchRecord. The SDK is designed with handles as the primary entry point, the other two entry points are implemented in terms of short-lived handles. For example, the implementation of a direct call allocates a handle, operates on the handle, and releases the handle. Similarly, the implementation of RecordBatch uses a short-lived handle for each measurement in the batch. The entry point for asynchronous instruments is via observer callbacks. Observer callbacks behave like a set of instrument handles - one for each observation for a distinct label set. The observer handles are alive as long as they are used. If the callback stops reporting values for a certain label set, the associated handle is dropped. The SDK is designed with minimal use of locking, to avoid adding contention for user-level code. For each handle, whether it is held by user-level code or a short-lived device, there exists an internal record managed by the SDK. Each internal record corresponds to a specific instrument and label set combination. Each observer also has its own kind of record stored in the SDK. This record contains a set of recorders for every specific label set used in the callback. A sync.Map maintains the mapping of current instruments and label sets to internal records. To create a new handle, the SDK consults the Map to locate an existing record, otherwise it constructs a new record. The SDK maintains a count of the number of references to each record, ensuring that records are not reclaimed from the Map while they are still active from the user's perspective. Metric collection is performed via a single-threaded call to Collect that sweeps through all records in the SDK, checkpointing their state. When a record is discovered that has no references and has not been updated since the prior collection pass, it is removed from the Map. The SDK maintains a current epoch number, corresponding to the number of completed collections. Each recorder of an observer record contains the last epoch during which it was updated. This variable allows the collection code path to detect stale recorders and remove them. Each record of a handle and recorder of an observer has an associated aggregator, which maintains the current state resulting from all metric events since its last checkpoint. Aggregators may be lock-free or they may use locking, but they should expect to be called concurrently. Aggregators must be capable of merging with another aggregator of the same type. While the SDK serves to maintain a current set of records and coordinate collection, the behavior of a metrics export pipeline is configured through the export types in github.com/InVisionApp/opentelemetry-go/sdk/export/metric. It is important to keep in mind the context these interfaces are called from. There are two contexts, instrumentation context, where a user-level goroutine that enters the SDK resulting in a new record, and collection context, where a system-level thread performs a collection pass through the SDK. Descriptor is a struct that describes the metric instrument to the export pipeline, containing the name, recommended aggregation keys, units, description, metric kind (counter or measure), number kind (int64 or float64), and whether the instrument has alternate semantics or not (i.e., monotonic=false counter, absolute=false measure). A Descriptor accompanies metric data as it passes through the export pipeline. The AggregationSelector interface supports choosing the method of aggregation to apply to a particular instrument. Given the Descriptor, this AggregatorFor method returns an implementation of Aggregator. If this interface returns nil, the metric will be disabled. The aggregator should be matched to the capabilities of the exporter. Selecting the aggregator for counter instruments is relatively straightforward, but for measure and observer instruments there are numerous choices with different cost and quality tradeoffs. Aggregator is an interface which implements a concrete strategy for aggregating metric updates. Several Aggregator implementations are provided by the SDK. Aggregators may be lock-free or use locking, depending on their structure and semantics. Aggregators implement an Update method, called in instrumentation context, to receive a single metric event. Aggregators implement a Checkpoint method, called in collection context, to save a checkpoint of the current state. Aggregators implement a Merge method, also called in collection context, that combines state from two aggregators into one. Each SDK record has an associated aggregator. Batcher is an interface which sits between the SDK and an exporter. The Batcher embeds an AggregationSelector, used by the SDK to assign new Aggregators. The Batcher supports a Process() API for submitting checkpointed aggregators to the batcher, and a CheckpointSet() API for producing a complete checkpoint for the exporter. Two default Batcher implementations are provided, the "defaultkeys" Batcher groups aggregate metrics by their recommended Descriptor.Keys(), the "ungrouped" Batcher aggregates metrics at full dimensionality. LabelEncoder is an optional optimization that allows an exporter to provide the serialization logic for labels. This allows avoiding duplicate serialization of labels, once as a unique key in the SDK (or Batcher) and once in the exporter. CheckpointSet is an interface between the Batcher and the Exporter. After completing a collection pass, the Batcher.CheckpointSet() method returns a CheckpointSet, which the Exporter uses to iterate over all the updated metrics. Record is a struct containing the state of an individual exported metric. This is the result of one collection interface for one instrument and one label set. Labels is a struct containing an ordered set of labels, the corresponding unique encoding, and the encoder that produced it. Exporter is the final stage of an export pipeline. It is called with a CheckpointSet capable of enumerating all the updated metrics. Controller is not an export interface per se, but it orchestrates the export pipeline. For example, a "push" controller will establish a periodic timer to regularly collect and export metrics. A "pull" controller will await a pull request before initiating metric collection. Either way, the job of the controller is to call the SDK Collect() method, then read the checkpoint, then invoke the exporter. Controllers are expected to implement the public metric.MeterProvider API, meaning they can be installed as the global Meter provider.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers • Templates • Barcodes gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. In particular, languages that require more than one code page such as Chinese, Japanese, and Arabic are not currently supported. This is explained in issue 109. However, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test ./..." is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory. The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. The draw2d package (https://github.com/llgcode/draw2d) is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the `contrib` directory. Here are guidelines for making submissions. Your change should • be compatible with the MIT License • be properly documented • be formatted with `go fmt` • include an example in fpdf_test.go if appropriate • conform to the standards of golint (https://github.com/golang/lint) and go vet (https://godoc.org/golang.org/x/tools/cmd/vet), that is, `golint .` and `go vet .` should not generate any warnings • not diminish test coverage (https://blog.golang.org/cover) Pull requests (https://help.github.com/articles/using-pull-requests/) work nicely as a means of contributing your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package's code and documentation are closely derived from the FPDF library (http://www.fpdf.org/) created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Bruno Michel has provided valuable assistance with the code. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool. This example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. - UTF-8 support - Choice of measurement unit, page format and margins - Page header and footer management - Automatic page breaks, line breaks, and text justification - Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images - Colors, gradients and alpha channel transparency - Outline bookmarks - Internal and external links - TrueType, Type1 and encoding support - Page compression - Lines, Bézier curves, arcs, and ellipses - Rotation, scaling, skewing, translation, and mirroring - Clipping - Document protection - Layers - Templates - Barcodes - Charting facility - Import PDFs as templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. gofpdf supports UTF-8 TrueType fonts and “right-to-left” languages. Note that Chinese, Japanese, and Korean characters may not be included in many general purpose fonts. For these languages, a specialized font (for example, NotoSansSC for simplified Chinese) can be used. Also, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. This repository will not be maintained, at least for some unknown duration. But it is hoped that gofpdf has a bright future in the open source world. Due to Go’s promise of compatibility, gofpdf should continue to function without modification for a longer time than would be the case with many other languages. Forks should be based on the last viable commit. Tools such as active-forks can be used to select a fork that looks promising for your needs. If a particular fork looks like it has taken the lead in attracting followers, this README will be updated to point people in that direction. The efforts of all contributors to this project have been deeply appreciated. Best wishes to all of you. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running go test ./... is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you’ll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory and if the third argument to ComparePDFFiles() in internal/example/example.go is true. (By default it is false.) The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). You should use AddUTF8Font() or AddUTF8FontFromBytes() to add a TrueType UTF-8 encoded font. Use RTL() and LTR() methods switch between “right-to-left” and “left-to-right” mode. In order to use a different non-UTF-8 TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run “go build”. This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include Google Fonts and DejaVu Fonts. The draw2d package is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the contrib directory. Here are guidelines for making submissions. Your change should - be compatible with the MIT License - be properly documented - be formatted with go fmt - include an example in fpdf_test.go if appropriate - conform to the standards of golint and go vet, that is, golint . and go vet . should not generate any warnings - not diminish test coverage Pull requests are the preferred means of accepting your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package’s code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Bruno Michel has provided valuable assistance with the code. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image’s extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Dan Meyers added support for embedded JavaScript. David Fish added a generic alias-replacement function to enable, among other things, table of contents functionality. Andy Bakun identified and corrected a problem in which the internal catalogs were not sorted stably. Paul Montag added encoding and decoding functionality for templates, including images that are embedded in templates; this allows templates to be stored independently of gofpdf. Paul also added support for page boxes used in printing PDF documents. Wojciech Matusiak added supported for word spacing. Artem Korotkiy added support of UTF-8 fonts. Dave Barnes added support for imported objects and templates. Brigham Thompson added support for rounded rectangles. Joe Westcott added underline functionality and optimized image storage. Benoit KUGLER contributed support for rectangles with corners of unequal radius, modification times, and for file attachments and annotations. - Remove all legacy code page font support; use UTF-8 exclusively - Improve test coverage as reported by the coverage tool. Example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers • Templates • Barcodes gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. In particular, languages that require more than one code page such as Chinese, Japanese, and Arabic are not currently supported. This is explained in issue 109. However, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test ./..." is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory. The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. The draw2d package (https://github.com/llgcode/draw2d) is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the `contrib` directory. Here are guidelines for making submissions. Your change should • be compatible with the MIT License • be properly documented • be formatted with `go fmt` • include an example in fpdf_test.go if appropriate • conform to the standards of golint (https://github.com/golang/lint) and go vet (https://godoc.org/golang.org/x/tools/cmd/vet), that is, `golint .` and `go vet .` should not generate any warnings • not diminish test coverage (https://blog.golang.org/cover) Pull requests (https://help.github.com/articles/using-pull-requests/) work nicely as a means of contributing your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package's code and documentation are closely derived from the FPDF library (http://www.fpdf.org/) created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Bruno Michel has provided valuable assistance with the code. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool. This example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. However, support is provided to translate UTF-8 runes to code page encodings. This package's code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Bruno Michel has provided valuable assistance with the code. The FPDF website is http://www.fpdf.org/. gofpdf is copyrighted by Kurt Jung and is released under the MIT License. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF. See the tutorials in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test" is the production of the tutorial PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. See tutorial 7 for an example. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. However, support is provided to translate UTF-8 runes to code page encodings. This package's code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Bruno Michel has provided valuable assistance with the code. The FPDF website is http://www.fpdf.org/. gofpdf is copyrighted by Kurt Jung and is released under the MIT License. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF. See the tutorials in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test" is the production of the tutorial PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these tutorials run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example docWriter and strDelimit. In particular, docWriter is used as an argument to OutputAndClose in order to reduce the boilerplate in each example. In practice, you may be better served by calling OutputFileAndClose(). Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. See tutorial 7 for an example. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. - UTF-8 support - Choice of measurement unit, page format and margins - Page header and footer management - Automatic page breaks, line breaks, and text justification - Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images - Colors, gradients and alpha channel transparency - Outline bookmarks - Internal and external links - TrueType, Type1 and encoding support - Page compression - Lines, Bézier curves, arcs, and ellipses - Rotation, scaling, skewing, translation, and mirroring - Clipping - Document protection - Layers - Templates - Barcodes - Charting facility - Import PDFs as templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. gofpdf supports UTF-8 TrueType fonts and “right-to-left” languages. Note that Chinese, Japanese, and Korean characters may not be included in many general purpose fonts. For these languages, a specialized font (for example, NotoSansSC for simplified Chinese) can be used. Also, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. This repository will not be maintained, at least for some unknown duration. But it is hoped that gofpdf has a bright future in the open source world. Due to Go’s promise of compatibility, gofpdf should continue to function without modification for a longer time than would be the case with many other languages. Forks should be based on the last viable commit. Tools such as active-forks can be used to select a fork that looks promising for your needs. If a particular fork looks like it has taken the lead in attracting followers, this README will be updated to point people in that direction. The efforts of all contributors to this project have been deeply appreciated. Best wishes to all of you. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running go test ./... is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you’ll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory and if the third argument to ComparePDFFiles() in internal/example/example.go is true. (By default it is false.) The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). You should use AddUTF8Font() or AddUTF8FontFromBytes() to add a TrueType UTF-8 encoded font. Use RTL() and LTR() methods switch between “right-to-left” and “left-to-right” mode. In order to use a different non-UTF-8 TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run “go build”. This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include Google Fonts and DejaVu Fonts. The draw2d package is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the contrib directory. Here are guidelines for making submissions. Your change should - be compatible with the MIT License - be properly documented - be formatted with go fmt - include an example in fpdf_test.go if appropriate - conform to the standards of golint and go vet, that is, golint . and go vet . should not generate any warnings - not diminish test coverage Pull requests are the preferred means of accepting your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package’s code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Bruno Michel has provided valuable assistance with the code. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image’s extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Dan Meyers added support for embedded JavaScript. David Fish added a generic alias-replacement function to enable, among other things, table of contents functionality. Andy Bakun identified and corrected a problem in which the internal catalogs were not sorted stably. Paul Montag added encoding and decoding functionality for templates, including images that are embedded in templates; this allows templates to be stored independently of gofpdf. Paul also added support for page boxes used in printing PDF documents. Wojciech Matusiak added supported for word spacing. Artem Korotkiy added support of UTF-8 fonts. Dave Barnes added support for imported objects and templates. Brigham Thompson added support for rounded rectangles. Joe Westcott added underline functionality and optimized image storage. Benoit KUGLER contributed support for rectangles with corners of unequal radius, modification times, and for file attachments and annotations. - Remove all legacy code page font support; use UTF-8 exclusively - Improve test coverage as reported by the coverage tool. Example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers • Templates • Barcodes gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. In particular, languages that require more than one code page such as Chinese, Japanese, and Arabic are not currently supported. This is explained in issue 109. However, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test ./..." is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory. The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. The draw2d package (https://github.com/llgcode/draw2d) is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the `contrib` directory. Here are guidelines for making submissions. Your change should • be compatible with the MIT License • be properly documented • be formatted with `go fmt` • include an example in fpdf_test.go if appropriate • conform to the standards of golint (https://github.com/golang/lint) and go vet (https://godoc.org/golang.org/x/tools/cmd/vet), that is, `golint .` and `go vet .` should not generate any warnings • not diminish test coverage (https://blog.golang.org/cover) Pull requests (https://help.github.com/articles/using-pull-requests/) work nicely as a means of contributing your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package's code and documentation are closely derived from the FPDF library (http://www.fpdf.org/) created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Bruno Michel has provided valuable assistance with the code. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool. This example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.