Printing

Package errorx provides error implementation and error-related utilities. Conventional approach towards errors in Go is quite limited. The typical case implies an error being created at some point: Then being passed along with a no-brainer: And, finally, handled by printing it to the log file: This approach is simple, but quite often it is not enough. There is a need to add context information to error, to check or hide its properties. If all else fails, it pays to have a stack trace printed along with error text. The code above could be modified in this fashion: Here errorx.Decorate is used to add more information, and syntax like errorx.IsOfType can still be used to check the original error. This error also holds a stack trace captured at the point of creation. With errorx syntax, any of this may be customized: stack trace can be omitted, error type can be hidden. Type can be further customized with Traits, and error with Properties. Package provides utility functions to compose, switch over, check, and ignore errors based on their types and properties. See documentation for Error, Type and Namespace for more details.

Package goworker is a Resque-compatible, Go-based background worker. It allows you to push jobs into a queue using an expressive language like Ruby while harnessing the efficiency and concurrency of Go to minimize job latency and cost. goworker workers can run alongside Ruby Resque clients so that you can keep all but your most resource-intensive jobs in Ruby. To create a worker, write a function matching the signature and register it using Here is a simple worker that prints its arguments: To create workers that share a database pool or other resources, use a closure to share variables. goworker worker functions receive the queue they are serving and a slice of interfaces. To use them as parameters to other functions, use Go type assertions to convert them into usable types. For testing, it is helpful to use the redis-cli program to insert jobs onto the Redis queue: will insert 100 jobs for the MyClass worker onto the myqueue queue. It is equivalent to: After building your workers, you will have an executable that you can run which will automatically poll a Redis server and call your workers as jobs arrive. There are several flags which control the operation of the goworker client. -queues="comma,delimited,queues" — This is the only required flag. The recommended practice is to separate your Resque workers from your goworkers with different queues. Otherwise, Resque worker classes that have no goworker analog will cause the goworker process to fail the jobs. Because of this, there is no default queue, nor is there a way to select all queues (à la Resque's * queue). Queues are processed in the order they are specififed. If you have multiple queues you can assign them weights. A queue with a weight of 2 will be checked twice as often as a queue with a weight of 1: -queues='high=2,low=1'. -interval=5.0 — Specifies the wait period between polling if no job was in the queue the last time one was requested. -concurrency=25 — Specifies the number of concurrently executing workers. This number can be as low as 1 or rather comfortably as high as 100,000, and should be tuned to your workflow and the availability of outside resources. -connections=2 — Specifies the maximum number of Redis connections that goworker will consume between the poller and all workers. There is not much performance gain over two and a slight penalty when using only one. This is configurable in case you need to keep connection counts low for cloud Redis providers who limit plans on maxclients. -uri=redis://localhost:6379/ — Specifies the URI of the Redis database from which goworker polls for jobs. Accepts URIs of the format redis://user:pass@host:port/db or unix:///path/to/redis.sock. The flag may also be set by the environment variable $($REDIS_PROVIDER) or $REDIS_URL. E.g. set $REDIS_PROVIDER to REDISTOGO_URL on Heroku to let the Redis To Go add-on configure the Redis database. -namespace=resque: — Specifies the namespace from which goworker retrieves jobs and stores stats on workers. -exit-on-complete=false — Exits goworker when there are no jobs left in the queue. This is helpful in conjunction with the time command to benchmark different configurations. -use-number=false — Uses json.Number when decoding numbers in the job payloads. This will avoid issues that occur when goworker and the json package decode large numbers as floats, which then get encoded in scientific notation, losing pecision. This will default to true soon. You can also configure your own flags for use within your workers. Be sure to set them before calling goworker.Main(). It is okay to call flags.Parse() before calling goworker.Main() if you need to do additional processing on your flags. To stop goworker, send a QUIT, TERM, or INT signal to the process. This will immediately stop job polling. There can be up to $CONCURRENCY jobs currently running, which will continue to run until they are finished. Like Resque, goworker makes no guarantees about the safety of jobs in the event of process shutdown. Workers must be both idempotent and tolerant to loss of the job in the event of failure. If the process is killed with a KILL or by a system failure, there may be one job that is currently in the poller's buffer that will be lost without any representation in either the queue or the worker variable. If you are running Goworker on a system like Heroku, which sends a TERM to signal a process that it needs to stop, ten seconds later sends a KILL to force the process to stop, your jobs must finish within 10 seconds or they may be lost. Jobs will be recoverable from the Redis database under as a JSON object with keys queue, run_at, and payload, but the process is manual. Additionally, there is no guarantee that the job in Redis under the worker key has not finished, if the process is killed before goworker can flush the update to Redis.

Package units provides helper function to parse and print size and time units in human-readable format.

Package quicktest provides a collection of Go helpers for writing tests. Quicktest helpers can be easily integrated inside regular Go tests, for instance: An assertion looks like this, where qt.Equals could be replaced by any available checker. If the assertion fails, the underlying Fatal method is called to describe the error and abort the test. If you don’t want to abort on failure, use Check instead, which calls Error instead of Fatal: For really short tests, the extra line for instantiating *qt.C can be avoided: The library provides some base checkers like Equals, DeepEquals, Matches, ErrorMatches, IsNil and others. More can be added by implementing the Checker interface. Below, we list the checkers implemented by the package in alphabetical order. All returns a Checker that uses the given checker to check elements of slice or array or the values of a map. It succeeds if all elements pass the check. On failure it prints the error from the first index that failed. For example: See also Any and Contains. Any returns a Checker that uses the given checker to check elements of a slice or array or the values from a map. It succeeds if any element passes the check. For example: See also All and Contains. CmpEquals checks equality of two arbitrary values according to the provided compare options. DeepEquals is more commonly used when no compare options are required. Example calls: CodecEquals returns a checker that checks for codec value equivalence. It expects two arguments: a byte slice or a string containing some codec-marshaled data, and a Go value. It uses unmarshal to unmarshal the data into an interface{} value. It marshals the Go value using marshal, then unmarshals the result into an interface{} value. It then checks that the two interface{} values are deep-equal to one another, using CmpEquals(opts) to perform the check. See JSONEquals for an example of this in use. Contains checks that a map, slice, array or string contains a value. It's the same as using Any(Equals), except that it has a special case for strings - if the first argument is a string, the second argument must also be a string and strings.Contains will be used. For example: ContentEquals is is like DeepEquals but any slices in the compared values will be sorted before being compared. For example: DeepEquals checks that two arbitrary values are deeply equal. The comparison is done using the github.com/google/go-cmp/cmp package. When comparing structs, by default no exported fields are allowed. If a more sophisticated comparison is required, use CmpEquals (see below). Example call: Equals checks that two values are equal, as compared with Go's == operator. For instance: Note that the following will fail: Use the IsNil checker below for this kind of nil check. ErrorAs checks that the error is or wraps a specific error type. If so, it assigns it to the provided pointer. This is analogous to calling errors.As. For instance: ErrorIs checks that the error is or wraps a specific error value. This is analogous to calling errors.Is. For instance: ErrorMatches checks that the provided value is an error whose message matches the provided regular expression. For instance: HasLen checks that the provided value has the given length. For instance: Implements checks that the provided value implements an interface. The interface is specified with a pointer to an interface variable. For instance: IsFalse checks that the provided value is false. The value must have a boolean underlying type. For instance: IsNil checks that the provided value is nil. For instance: As a special case, if the value is nil but implements the error interface, it is still considered to be non-nil. This means that IsNil will fail on an error value that happens to have an underlying nil value, because that's invariably a mistake. See https://golang.org/doc/faq#nil_error. So it's just fine to check an error like this: IsNotNil is a Checker checking that the provided value is not nil. IsNotNil is the equivalent of qt.Not(qt.IsNil) For instance: IsTrue checks that the provided value is true. The value must have a boolean underlying type. For instance: JSONEquals checks whether a byte slice or string is JSON-equivalent to a Go value. See CodecEquals for more information. It uses DeepEquals to do the comparison. If a more sophisticated comparison is required, use CodecEquals directly. For instance: Matches checks that a string or result of calling the String method (if the value implements fmt.Stringer) matches the provided regular expression. For instance: Not returns a Checker negating the given Checker. For instance: PanicMatches checks that the provided function panics with a message matching the provided regular expression. For instance: Satisfies checks that the provided value, when used as argument of the provided predicate function, causes the function to return true. The function must be of type func(T) bool, having got assignable to T. For instance: The testing.TB.Cleanup helper provides the ability to defer the execution of functions that will be run when the test completes. This is often useful for creating OS-level resources such as temporary directories (see c.Mkdir). When targeting Go versions that don't have Cleanup (< 1.14), the same can be achieved using c.Defer. In this case, to trigger the deferred behavior, calling c.Done is required. For instance, if you create a *C instance at the top level, you’ll have to add a defer to trigger the cleanups at the end of the test: However, if you use quicktest to create a subtest, Done will be called automatically at the end of that subtest. For example: The c.Patch, c.Setenv, c.Unsetenv and c.Mkdir helpers use t.Cleanup for cleaning up resources when available, and fall back to Defer otherwise.

CBSD 3-Clause License Copyright (c) 2017-2022, Gerasimos (Makis) Maropoulos (kataras2006@hotmail.com) All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. /* Package golog provides an easy to use foundation for your logging operations. Source code and other details for the project are available at GitHub: 0.1.12 The only requirement is the Go Programming Language Example code: Golog has a default, package-level initialized instance for you, however you can choose to create and use a logger instance for a specific part of your application. Example Code: Golog sets colors to levels when its `Printer.Output` is actual a compatible terminal which can renders colors, otherwise it will downgrade itself to a white foreground. Golog has functions to print a formatted log too. Example Code: Golog takes a simple `io.Writer` as its underline Printer's Output. Example Code: You can even override the default line braker, "\n", by using the `golog#NewLine` function at startup. Example Code: Golog is a leveled logger, therefore you can set a level and print whenever the print level is valid with the set-ed one. Available built'n levels are: Below you'll learn a way to add a custom level or modify an existing level. The default colorful text(or raw text for unsupported outputs) for levels can be overridden by using the `golog#ErrorText, golog#WarnText, golog#InfoText and golog#DebugText` functions. Example Code: Golog gives you the power to add or modify existing levels is via Level Metadata. Example Code: The logger's level can be changed via passing one of the level constants to the `Level` field or by passing its string representation to the `SetLevel` function. Example Code: Transaction with your favorite, but deprecated logger is easy. Golog offers two basic interfaces, the `ExternalLogger` and the `StdLogger` that can be directly used as arguments to the `Install` function in order to adapt an external logger. Outline: Example Code: Example Code: But you should have a basic idea of the golog package by now, we just scratched the surface. If you enjoy what you just saw and want to learn more, please follow the below links: Examples:

Package skipper provides an HTTP routing library with flexible configuration as well as a runtime update of the routing rules. Skipper works as an HTTP reverse proxy that is responsible for mapping incoming requests to multiple HTTP backend services, based on routes that are selected by the request attributes. At the same time, both the requests and the responses can be augmented by a filter chain that is specifically defined for each route. Optionally, it can provide circuit breaker mechanism individually for each backend host. Skipper can load and update the route definitions from multiple data sources without being restarted. It provides a default executable command with a few built-in filters, however, its primary use case is to be extended with custom filters, predicates or data sources. For further information read 'Extending Skipper'. Skipper took the core design and inspiration from Vulcand: https://github.com/mailgun/vulcand. Skipper is 'go get' compatible. If needed, create a 'go workspace' first: Get the Skipper packages: Create a file with a route: Optionally, verify the syntax of the file: Start Skipper and make an HTTP request: The core of Skipper's request processing is implemented by a reverse proxy in the 'proxy' package. The proxy receives the incoming request, forwards it to the routing engine in order to receive the most specific matching route. When a route matches, the request is forwarded to all filters defined by it. The filters can modify the request or execute any kind of program logic. Once the request has been processed by all the filters, it is forwarded to the backend endpoint of the route. The response from the backend goes once again through all the filters in reverse order. Finally, it is mapped as the response of the original incoming request. Besides the default proxying mechanism, it is possible to define routes without a real network backend endpoint. One of these cases is called a 'shunt' backend, in which case one of the filters needs to handle the request providing its own response (e.g. the 'static' filter). Actually, filters themselves can instruct the request flow to shunt by calling the Serve(*http.Response) method of the filter context. Another case of a route without a network backend is the 'loopback'. A loopback route can be used to match a request, modified by filters, against the lookup tree with different conditions and then execute a different route. One example scenario can be to use a single route as an entry point to execute some calculation to get an A/B testing decision and then matching the updated request metadata for the actual destination route. This way the calculation can be executed for only those requests that don't contain information about a previously calculated decision. For further details, see the 'proxy' and 'filters' package documentation. Finding a request's route happens by matching the request attributes to the conditions in the route's definitions. Such definitions may have the following conditions: - method - path (optionally with wildcards) - path regular expressions - host regular expressions - headers - header regular expressions It is also possible to create custom predicates with any other matching criteria. The relation between the conditions in a route definition is 'and', meaning, that a request must fulfill each condition to match a route. For further details, see the 'routing' package documentation. Filters are applied in order of definition to the request and in reverse order to the response. They are used to modify request and response attributes, such as headers, or execute background tasks, like logging. Some filters may handle the requests without proxying them to service backends. Filters, depending on their implementation, may accept/require parameters, that are set specifically to the route. For further details, see the 'filters' package documentation. Each route has one of the following backends: HTTP endpoint, shunt, loopback or dynamic. Backend endpoints can be any HTTP service. They are specified by their network address, including the protocol scheme, the domain name or the IP address, and optionally the port number: e.g. "https://www.example.org:4242". (The path and query are sent from the original request, or set by filters.) A shunt route means that Skipper handles the request alone and doesn't make requests to a backend service. In this case, it is the responsibility of one of the filters to generate the response. A loopback route executes the routing mechanism on current state of the request from the start, including the route lookup. This way it serves as a form of an internal redirect. A dynamic route means that the final target will be defined in a filter. One of the filters in the chain must set the target backend url explicitly. Route definitions consist of the following: - request matching conditions (predicates) - filter chain (optional) - backend The eskip package implements the in-memory and text representations of route definitions, including a parser. (Note to contributors: in order to stay compatible with 'go get', the generated part of the parser is stored in the repository. When changing the grammar, 'go generate' needs to be executed explicitly to update the parser.) For further details, see the 'eskip' package documentation Skipper has filter implementations of basic auth and OAuth2. It can be integrated with tokeninfo based OAuth2 providers. For details, see: https://godoc.org/github.com/zalando/skipper/filters/auth. Skipper's route definitions of Skipper are loaded from one or more data sources. It can receive incremental updates from those data sources at runtime. It provides three different data clients: - Kubernetes: Skipper can be used as part of a Kubernetes Ingress Controller implementation together with https://github.com/zalando-incubator/kube-ingress-aws-controller . In this scenario, Skipper uses the Kubernetes API's Ingress extensions as a source for routing. For a complete deployment example, see more details in: https://github.com/zalando-incubator/kubernetes-on-aws/ . - Innkeeper: the Innkeeper service implements a storage for large sets of Skipper routes, with an HTTP+JSON API, OAuth2 authentication and role management. See the 'innkeeper' package and https://github.com/zalando/innkeeper. - etcd: Skipper can load routes and receive updates from etcd clusters (https://github.com/coreos/etcd). See the 'etcd' package. - static file: package eskipfile implements a simple data client, which can load route definitions from a static file in eskip format. Currently, it loads the routes on startup. It doesn't support runtime updates. Skipper can use additional data sources, provided by extensions. Sources must implement the DataClient interface in the routing package. Skipper provides circuit breakers, configured either globally, based on backend hosts or based on individual routes. It supports two types of circuit breaker behavior: open on N consecutive failures, or open on N failures out of M requests. For details, see: https://godoc.org/github.com/zalando/skipper/circuit. Skipper can be started with the default executable command 'skipper', or as a library built into an application. The easiest way to start Skipper as a library is to execute the 'Run' function of the current, root package. Each option accepted by the 'Run' function is wired in the default executable as well, as a command line flag. E.g. EtcdUrls becomes -etcd-urls as a comma separated list. For command line help, enter: An additional utility, eskip, can be used to verify, print, update and delete routes from/to files or etcd (Innkeeper on the roadmap). See the cmd/eskip command package, and/or enter in the command line: Skipper doesn't use dynamically loaded plugins, however, it can be used as a library, and it can be extended with custom predicates, filters and/or custom data sources. To create a custom predicate, one needs to implement the PredicateSpec interface in the routing package. Instances of the PredicateSpec are used internally by the routing package to create the actual Predicate objects as referenced in eskip routes, with concrete arguments. Example, randompredicate.go: In the above example, a custom predicate is created, that can be referenced in eskip definitions with the name 'Random': To create a custom filter we need to implement the Spec interface of the filters package. 'Spec' is the specification of a filter, and it is used to create concrete filter instances, while the raw route definitions are processed. Example, hellofilter.go: The above example creates a filter specification, and in the routes where they are included, the filter instances will set the 'X-Hello' header for each and every response. The name of the filter is 'hello', and in a route definition it is referenced as: The easiest way to create a custom Skipper variant is to implement the required filters (as in the example above) by importing the Skipper package, and starting it with the 'Run' command. Example, hello.go: A file containing the routes, routes.eskip: Start the custom router: The 'Run' function in the root Skipper package starts its own listener but it doesn't provide the best composability. The proxy package, however, provides a standard http.Handler, so it is possible to use it in a more complex solution as a building block for routing. Skipper provides detailed logging of failures, and access logs in Apache log format. Skipper also collects detailed performance metrics, and exposes them on a separate listener endpoint for pulling snapshots. For details, see the 'logging' and 'metrics' packages documentation. The router's performance depends on the environment and on the used filters. Under ideal circumstances, and without filters, the biggest time factor is the route lookup. Skipper is able to scale to thousands of routes with logarithmic performance degradation. However, this comes at the cost of increased memory consumption, due to storing the whole lookup tree in a single structure. Benchmarks for the tree lookup can be run by: In case more aggressive scale is needed, it is possible to setup Skipper in a cascade model, with multiple Skipper instances for specific route segments.

Package docopt parses command-line arguments based on a help message. Given a conventional command-line help message, docopt processes the arguments. See https://github.com/docopt/docopt#help-message-format for a description of the help message format. This package exposes three different APIs, depending on the level of control required. The first, simplest way to parse your docopt usage is to just call: This will use os.Args[1:] as the argv slice, and use the default parser options. If you want to provide your own version string and args, then use: If the last parameter (version) is a non-empty string, it will be printed when --version is given in the argv slice. Finally, we can instantiate our own docopt.Parser which gives us control over how things like help messages are printed and whether to exit after displaying usage messages, etc. In particular, setting your own custom HelpHandler function makes unit testing your own docs with example command line invocations much more enjoyable. All three of these return a map of option names to the values parsed from argv, and an error or nil. You can get the values using the helpers, or just treat it as a regular map: Additionally, you can `Bind` these to a struct, assigning option values to the exported fields of that struct, all at once.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. - UTF-8 support - Choice of measurement unit, page format and margins - Page header and footer management - Automatic page breaks, line breaks, and text justification - Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images - Colors, gradients and alpha channel transparency - Outline bookmarks - Internal and external links - TrueType, Type1 and encoding support - Page compression - Lines, Bézier curves, arcs, and ellipses - Rotation, scaling, skewing, translation, and mirroring - Clipping - Document protection - Layers - Templates - Barcodes - Charting facility - Import PDFs as templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. gofpdf supports UTF-8 TrueType fonts and “right-to-left” languages. Note that Chinese, Japanese, and Korean characters may not be included in many general purpose fonts. For these languages, a specialized font (for example, NotoSansSC for simplified Chinese) can be used. Also, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. This repository will not be maintained, at least for some unknown duration. But it is hoped that gofpdf has a bright future in the open source world. Due to Go’s promise of compatibility, gofpdf should continue to function without modification for a longer time than would be the case with many other languages. Forks should be based on the last viable commit. Tools such as active-forks can be used to select a fork that looks promising for your needs. If a particular fork looks like it has taken the lead in attracting followers, this README will be updated to point people in that direction. The efforts of all contributors to this project have been deeply appreciated. Best wishes to all of you. If you currently use the $GOPATH scheme, install the package with the following command. To test the installation, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running go test ./... is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you’ll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory and if the third argument to ComparePDFFiles() in internal/example/example.go is true. (By default it is false.) The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). You should use AddUTF8Font() or AddUTF8FontFromBytes() to add a TrueType UTF-8 encoded font. Use RTL() and LTR() methods switch between “right-to-left” and “left-to-right” mode. In order to use a different non-UTF-8 TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run “go build”. This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include Google Fonts and DejaVu Fonts. The draw2d package is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the contrib directory. Here are guidelines for making submissions. Your change should - be compatible with the MIT License - be properly documented - be formatted with go fmt - include an example in fpdf_test.go if appropriate - conform to the standards of golint and go vet, that is, golint . and go vet . should not generate any warnings - not diminish test coverage Pull requests are the preferred means of accepting your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package’s code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Bruno Michel has provided valuable assistance with the code. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image’s extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Dan Meyers added support for embedded JavaScript. David Fish added a generic alias-replacement function to enable, among other things, table of contents functionality. Andy Bakun identified and corrected a problem in which the internal catalogs were not sorted stably. Paul Montag added encoding and decoding functionality for templates, including images that are embedded in templates; this allows templates to be stored independently of gofpdf. Paul also added support for page boxes used in printing PDF documents. Wojciech Matusiak added supported for word spacing. Artem Korotkiy added support of UTF-8 fonts. Dave Barnes added support for imported objects and templates. Brigham Thompson added support for rounded rectangles. Joe Westcott added underline functionality and optimized image storage. Benoit KUGLER contributed support for rectangles with corners of unequal radius, modification times, and for file attachments and annotations. - Remove all legacy code page font support; use UTF-8 exclusively - Improve test coverage as reported by the coverage tool. Example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package dicom provides a set of tools to read, write, and generally work with DICOM (https://dicom.nema.org/) medical image files in Go. dicom.Parse and dicom.Write provide the core functionality to read and write DICOM Datasets. This package provides Go data structures that represent DICOM concepts (for example, dicom.Dataset and dicom.Element). These structures will pretty-print by default and are JSON serializable out of the box. This package provides some advanced functionality as well, including: streaming image frames to an output channel, reading elements one-by-one (like an iterator pattern), flat iteration over nested elements in a Dataset, and more. General usage is simple. Check out the package examples below and some function specific examples. It may also be helpful to take a look at the example cmd/dicomutil program, which is a CLI built around this library to save out image frames from DICOMs and print out metadata to STDOUT.

Package log15 provides an opinionated, simple toolkit for best-practice logging that is both human and machine readable. It is modeled after the standard library's io and net/http packages. This package enforces you to only log key/value pairs. Keys must be strings. Values may be any type that you like. The default output format is logfmt, but you may also choose to use JSON instead if that suits you. Here's how you log: This will output a line that looks like: To get started, you'll want to import the library: Now you're ready to start logging: Because recording a human-meaningful message is common and good practice, the first argument to every logging method is the value to the *implicit* key 'msg'. Additionally, the level you choose for a message will be automatically added with the key 'lvl', and so will the current timestamp with key 't'. You may supply any additional context as a set of key/value pairs to the logging function. log15 allows you to favor terseness, ordering, and speed over safety. This is a reasonable tradeoff for logging functions. You don't need to explicitly state keys/values, log15 understands that they alternate in the variadic argument list: If you really do favor your type-safety, you may choose to pass a log.Ctx instead: Frequently, you want to add context to a logger so that you can track actions associated with it. An http request is a good example. You can easily create new loggers that have context that is automatically included with each log line: This will output a log line that includes the path context that is attached to the logger: The Handler interface defines where log lines are printed to and how they are formated. Handler is a single interface that is inspired by net/http's handler interface: Handlers can filter records, format them, or dispatch to multiple other Handlers. This package implements a number of Handlers for common logging patterns that are easily composed to create flexible, custom logging structures. Here's an example handler that prints logfmt output to Stdout: Here's an example handler that defers to two other handlers. One handler only prints records from the rpc package in logfmt to standard out. The other prints records at Error level or above in JSON formatted output to the file /var/log/service.json This package implements three Handlers that add debugging information to the context, CallerFileHandler, CallerFuncHandler and CallerStackHandler. Here's an example that adds the source file and line number of each logging call to the context. This will output a line that looks like: Here's an example that logs the call stack rather than just the call site. This will output a line that looks like: The "%+v" format instructs the handler to include the path of the source file relative to the compile time GOPATH. The github.com/go-stack/stack package documents the full list of formatting verbs and modifiers available. The Handler interface is so simple that it's also trivial to write your own. Let's create an example handler which tries to write to one handler, but if that fails it falls back to writing to another handler and includes the error that it encountered when trying to write to the primary. This might be useful when trying to log over a network socket, but if that fails you want to log those records to a file on disk. This pattern is so useful that a generic version that handles an arbitrary number of Handlers is included as part of this library called FailoverHandler. Sometimes, you want to log values that are extremely expensive to compute, but you don't want to pay the price of computing them if you haven't turned up your logging level to a high level of detail. This package provides a simple type to annotate a logging operation that you want to be evaluated lazily, just when it is about to be logged, so that it would not be evaluated if an upstream Handler filters it out. Just wrap any function which takes no arguments with the log.Lazy type. For example: If this message is not logged for any reason (like logging at the Error level), then factorRSAKey is never evaluated. The same log.Lazy mechanism can be used to attach context to a logger which you want to be evaluated when the message is logged, but not when the logger is created. For example, let's imagine a game where you have Player objects: You always want to log a player's name and whether they're alive or dead, so when you create the player object, you might do: Only now, even after a player has died, the logger will still report they are alive because the logging context is evaluated when the logger was created. By using the Lazy wrapper, we can defer the evaluation of whether the player is alive or not to each log message, so that the log records will reflect the player's current state no matter when the log message is written: If log15 detects that stdout is a terminal, it will configure the default handler for it (which is log.StdoutHandler) to use TerminalFormat. This format logs records nicely for your terminal, including color-coded output based on log level. Becasuse log15 allows you to step around the type system, there are a few ways you can specify invalid arguments to the logging functions. You could, for example, wrap something that is not a zero-argument function with log.Lazy or pass a context key that is not a string. Since logging libraries are typically the mechanism by which errors are reported, it would be onerous for the logging functions to return errors. Instead, log15 handles errors by making these guarantees to you: - Any log record containing an error will still be printed with the error explained to you as part of the log record. - Any log record containing an error will include the context key LOG15_ERROR, enabling you to easily (and if you like, automatically) detect if any of your logging calls are passing bad values. Understanding this, you might wonder why the Handler interface can return an error value in its Log method. Handlers are encouraged to return errors only if they fail to write their log records out to an external source like if the syslog daemon is not responding. This allows the construction of useful handlers which cope with those failures like the FailoverHandler. log15 is intended to be useful for library authors as a way to provide configurable logging to users of their library. Best practice for use in a library is to always disable all output for your logger by default and to provide a public Logger instance that consumers of your library can configure. Like so: Users of your library may then enable it if they like: The ability to attach context to a logger is a powerful one. Where should you do it and why? I favor embedding a Logger directly into any persistent object in my application and adding unique, tracing context keys to it. For instance, imagine I am writing a web browser: When a new tab is created, I assign a logger to it with the url of the tab as context so it can easily be traced through the logs. Now, whenever we perform any operation with the tab, we'll log with its embedded logger and it will include the tab title automatically: There's only one problem. What if the tab url changes? We could use log.Lazy to make sure the current url is always written, but that would mean that we couldn't trace a tab's full lifetime through our logs after the user navigate to a new URL. Instead, think about what values to attach to your loggers the same way you think about what to use as a key in a SQL database schema. If it's possible to use a natural key that is unique for the lifetime of the object, do so. But otherwise, log15's ext package has a handy RandId function to let you generate what you might call "surrogate keys" They're just random hex identifiers to use for tracing. Back to our Tab example, we would prefer to set up our Logger like so: Now we'll have a unique traceable identifier even across loading new urls, but we'll still be able to see the tab's current url in the log messages. For all Handler functions which can return an error, there is a version of that function which will return no error but panics on failure. They are all available on the Must object. For example: All of the following excellent projects inspired the design of this library: code.google.com/p/log4go github.com/op/go-logging github.com/technoweenie/grohl github.com/Sirupsen/logrus github.com/kr/logfmt github.com/spacemonkeygo/spacelog golang's stdlib, notably io and net/http https://xkcd.com/927/

This example shows how to instrument sql queries in order to display the time that they consume package main import ( ) // Hooks satisfies the sqlhook.Hooks interface type Hooks struct {} // Before hook will print the query with it's args and return the context with the timestamp // After hook will get the timestamp registered on the Before hook and print the elapsed time /* Output should look like: > CREATE TABLE t (id INTEGER, text VARCHAR(16)) []. took: 121.238µs > INSERT into t (text) VALUES(?), (?) ["foo" "bar"]. took: 36.364µs > SELECT id, text FROM t []. took: 4.653µs */

This is the official Go SDK for Oracle Cloud Infrastructure Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#installing for installation instructions. Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring for configuration instructions. The following example shows how to get started with the SDK. The example belows creates an identityClient struct with the default configuration. It then utilizes the identityClient to list availability domains and prints them out to stdout More examples can be found in the SDK Github repo: https://github.com/oracle/oci-go-sdk/tree/master/example Optional fields are represented with the `mandatory:"false"` tag on input structs. The SDK will omit all optional fields that are nil when making requests. In the case of enum-type fields, the SDK will omit fields whose value is an empty string. The SDK uses pointers for primitive types in many input structs. To aid in the construction of such structs, the SDK provides functions that return a pointer for a given value. For example: The SDK exposes functionality that allows the user to customize any http request before is sent to the service. You can do so by setting the `Interceptor` field in any of the `Client` structs. For example: The Interceptor closure gets called before the signing process, thus any changes done to the request will be properly signed and submitted to the service. The SDK exposes a stand-alone signer that can be used to signing custom requests. Related code can be found here: https://github.com/oracle/oci-go-sdk/blob/master/common/http_signer.go. The example below shows how to create a default signer. The signer also allows more granular control on the headers used for signing. For example: You can combine a custom signer with the exposed clients in the SDK. This allows you to add custom signed headers to the request. Following is an example: Bear in mind that some services have a white list of headers that it expects to be signed. Therefore, adding an arbitrary header can result in authentications errors. To see a runnable example, see https://github.com/oracle/oci-go-sdk/blob/master/example/example_identity_test.go For more information on the signing algorithm refer to: https://docs.cloud.oracle.com/Content/API/Concepts/signingrequests.htm Some operations accept or return polymorphic JSON objects. The SDK models such objects as interfaces. Further the SDK provides structs that implement such interfaces. Thus, for all operations that expect interfaces as input, pass the struct in the SDK that satisfies such interface. For example: In the case of a polymorphic response you can type assert the interface to the expected type. For example: An example of polymorphic JSON request handling can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_test.go#L63 When calling a list operation, the operation will retrieve a page of results. To retrieve more data, call the list operation again, passing in the value of the most recent response's OpcNextPage as the value of Page in the next list operation call. When there is no more data the OpcNextPage field will be nil. An example of pagination using this logic can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_pagination_test.go The SDK has a built-in logging mechanism used internally. The internal logging logic is used to record the raw http requests, responses and potential errors when (un)marshalling request and responses. Built-in logging in the SDK is controlled via the environment variable "OCI_GO_SDK_DEBUG" and its contents. The below are possible values for the "OCI_GO_SDK_DEBUG" variable 1. "info" or "i" enables all info logging messages 2. "debug" or "d" enables all debug and info logging messages 3. "verbose" or "v" or "1" enables all verbose, debug and info logging messages 4. "null" turns all logging messages off. If the value of the environment variable does not match any of the above then default logging level is "info". If the environment variable is not present then no logging messages are emitted. The default destination for logging is Stderr and if you want to output log to a file you can set via environment variable "OCI_GO_SDK_LOG_OUTPUT_MODE". The below are possible values 1. "file" or "f" enables all logging output saved to file 2. "combine" or "c" enables all logging output to both stderr and file You can also customize the log file location and name via "OCI_GO_SDK_LOG_FILE" environment variable, the value should be the path to a specific file If this environment variable is not present, the default location will be the project root path Sometimes you may need to wait until an attribute of a resource, such as an instance or a VCN, reaches a certain state. An example of this would be launching an instance and then waiting for the instance to become available, or waiting until a subnet in a VCN has been terminated. You might also want to retry the same operation again if there's network issue etc... This can be accomplished by using the RequestMetadata.RetryPolicy(request level configuration), alternatively, global(all services) or client level RetryPolicy configration is also possible. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_retry_test.go If you are trying to make a PUT/POST API call with binary request body, please make sure the binary request body is resettable, which means the request body should inherit Seeker interface. The Retry behavior Precedence (Highest to lowest) is defined as below:- The OCI Go SDK defines a default retry policy that retries on the errors suitable for retries (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm), for a recommended period of time (up to 7 attempts spread out over at most approximately 1.5 minutes). The default retry policy is defined by : Default Retry-able Errors Below is the list of default retry-able errors for which retry attempts should be made. The following errors should be retried (with backoff). HTTP Code Customer-facing Error Code Apart from the above errors, retries should also be attempted in the following Client Side errors : 1. HTTP Connection timeout 2. Request Connection Errors 3. Request Exceptions 4. Other timeouts (like Read Timeout) The above errors can be avoided through retrying and hence, are classified as the default retry-able errors. Additionally, retries should also be made for Circuit Breaker exceptions (Exceptions raised by Circuit Breaker in an open state) Default Termination Strategy The termination strategy defines when SDKs should stop attempting to retry. In other words, it's the deadline for retries. The OCI SDKs should stop retrying the operation after 7 retry attempts. This means the SDKs will have retried for ~98 seconds or ~1.5 minutes have elapsed due to total delays. SDKs will make a total of 8 attempts. (1 initial request + 7 retries) Default Delay Strategy Default Delay Strategy - The delay strategy defines the amount of time to wait between each of the retry attempts. The default delay strategy chosen for the SDK – Exponential backoff with jitter, using: 1. The base time to use in retry calculations will be 1 second 2. An exponent of 2. When calculating the next retry time, the SDK will raise this to the power of the number of attempts 3. A maximum wait time between calls of 30 seconds (Capped) 4. Added jitter value between 0-1000 milliseconds to spread out the requests Configure and use default retry policy You can set this retry policy for a single request: or for all requests made by a client: or for all requests made by all clients: or setting default retry via environment varaible, which is a global switch for all services: Some services enable retry for operations by default, this can be overridden using any alternatives mentioned above. To know which service operations have retries enabled by default, look at the operation's description in the SDK - it will say whether that it has retries enabled by default Some resources may have to be replicated across regions and are only eventually consistent. That means the request to create, update, or delete the resource succeeded, but the resource is not available everywhere immediately. Creating, updating, or deleting any resource in the Identity service is affected by eventual consistency, and doing so may cause other operations in other services to fail until the Identity resource has been replicated. For example, the request to CreateTag in the Identity service in the home region succeeds, but immediately using that created tag in another region in a request to LaunchInstance in the Compute service may fail. If you are creating, updating, or deleting resources in the Identity service, we recommend using an eventually consistent retry policy for any service you access. The default retry policy already deals with eventual consistency. Example: This retry policy will use a different strategy if an eventually consistent change was made in the recent past (called the "eventually consistent window", currently defined to be 4 minutes after the eventually consistent change). This special retry policy for eventual consistency will: 1. make up to 9 attempts (including the initial attempt); if an attempt is successful, no more attempts will be made 2. retry at most until (a) approximately the end of the eventually consistent window or (b) the end of the default retry period of about 1.5 minutes, whichever is farther in the future; if an attempt is successful, no more attempts will be made, and the OCI Go SDK will not wait any longer 3. retry on the error codes 400-RelatedResourceNotAuthorizedOrNotFound, 404-NotAuthorizedOrNotFound, and 409-NotAuthorizedOrResourceAlreadyExists, for which the default retry policy does not retry, in addition to the errors the default retry policy retries on (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm) If there were no eventually consistent actions within the recent past, then this special retry strategy is not used. If you want a retry policy that does not handle eventual consistency in a special way, for example because you retry on all error responses, you can use DefaultRetryPolicyWithoutEventualConsistency or NewRetryPolicyWithOptions with the common.ReplaceWithValuesFromRetryPolicy(common.DefaultRetryPolicyWithoutEventualConsistency()) option: The NewRetryPolicy function also creates a retry policy without eventual consistency. Circuit Breaker can prevent an application repeatedly trying to execute an operation that is likely to fail, allowing it to continue without waiting for the fault to be rectified or wasting CPU cycles, of course, it also enables an application to detect whether the fault has been resolved. If the problem appears to have been rectified, the application can attempt to invoke the operation. Go SDK intergrates sony/gobreaker solution, wraps in a circuit breaker object, which monitors for failures. Once the failures reach a certain threshold, the circuit breaker trips, and all further calls to the circuit breaker return with an error, this also saves the service from being overwhelmed with network calls in case of an outage. Circuit Breaker Configuration Definitions 1. Failure Rate Threshold - The state of the CircuitBreaker changes from CLOSED to OPEN when the failure rate is equal or greater than a configurable threshold. For example when more than 50% of the recorded calls have failed. 2. Reset Timeout - The timeout after which an open circuit breaker will attempt a request if a request is made 3. Failure Exceptions - The list of Exceptions that will be regarded as failures for the circuit. 4. Minimum number of calls/ Volume threshold - Configures the minimum number of calls which are required (per sliding window period) before the CircuitBreaker can calculate the error rate. 1. Failure Rate Threshold - 80% - This means when 80% of the requests calculated for a time window of 120 seconds have failed then the circuit will transition from closed to open. 2. Minimum number of calls/ Volume threshold - A value of 10, for the above defined time window of 120 seconds. 3. Reset Timeout - 30 seconds to wait before setting the breaker to halfOpen state, and trying the action again. 4. Failure Exceptions - The failures for the circuit will only be recorded for the retryable/transient exceptions. This means only the following exceptions will be regarded as failure for the circuit. HTTP Code Customer-facing Error Code Apart from the above, the following client side exceptions will also be treated as a failure for the circuit : 1. HTTP Connection timeout 2. Request Connection Errors 3. Request Exceptions 4. Other timeouts (like Read Timeout) Go SDK enable circuit breaker with default configuration for most of the service clients, if you don't want to enable the solution, can disable the functionality before your application running Go SDK also supports customize Circuit Breaker with specified configurations. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_circuitbreaker_test.go To know which service clients have circuit breakers enabled, look at the service client's description in the SDK - it will say whether that it has circuit breakers enabled by default The GO SDK uses the net/http package to make calls to OCI services. If your environment requires you to use a proxy server for outgoing HTTP requests then you can set this up in the following ways: 1. Configuring environment variable as described here https://golang.org/pkg/net/http/#ProxyFromEnvironment 2. Modifying the underlying Transport struct for a service client In order to modify the underlying Transport struct in HttpClient, you can do something similar to (sample code for audit service client): The Object Storage service supports multipart uploads to make large object uploads easier by splitting the large object into parts. The Go SDK supports raw multipart upload operations for advanced use cases, as well as a higher level upload class that uses the multipart upload APIs. For links to the APIs used for multipart upload operations, see Managing Multipart Uploads (https://docs.cloud.oracle.com/iaas/Content/Object/Tasks/usingmultipartuploads.htm). Higher level multipart uploads are implemented using the UploadManager, which will: split a large object into parts for you, upload the parts in parallel, and then recombine and commit the parts as a single object in storage. This code sample shows how to use the UploadManager to automatically split an object into parts for upload to simplify interaction with the Object Storage service: https://github.com/oracle/oci-go-sdk/blob/master/example/example_objectstorage_test.go Some response fields are enum-typed. In the future, individual services may return values not covered by existing enums for that field. To address this possibility, every enum-type response field is a modeled as a type that supports any string. Thus if a service returns a value that is not recognized by your version of the SDK, then the response field will be set to this value. When individual services return a polymorphic JSON response not available as a concrete struct, the SDK will return an implementation that only satisfies the interface modeling the polymorphic JSON response. If you are using a version of the SDK released prior to the announcement of a new region, you may need to use a workaround to reach it, depending on whether the region is in the oraclecloud.com realm. A region is a localized geographic area. For more information on regions and how to identify them, see Regions and Availability Domains(https://docs.cloud.oracle.com/iaas/Content/General/Concepts/regions.htm). A realm is a set of regions that share entities. You can identify your realm by looking at the domain name at the end of the network address. For example, the realm for xyz.abc.123.oraclecloud.com is oraclecloud.com. oraclecloud.com Realm: For regions in the oraclecloud.com realm, even if common.Region does not contain the new region, the forward compatibility of the SDK can automatically handle it. You can pass new region names just as you would pass ones that are already defined. For more information on passing region names in the configuration, see Configuring (https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring). For details on common.Region, see (https://github.com/oracle/oci-go-sdk/blob/master/common/common.go). Other Realms: For regions in realms other than oraclecloud.com, you can use the following workarounds to reach new regions with earlier versions of the SDK. NOTE: Be sure to supply the appropriate endpoints for your region. You can overwrite the target host with client.Host: If you are authenticating via instance principals, you can set the authentication endpoint in an environment variable: Got a fix for a bug, or a new feature you'd like to contribute? The SDK is open source and accepting pull requests on GitHub https://github.com/oracle/oci-go-sdk Licensing information available at: https://github.com/oracle/oci-go-sdk/blob/master/LICENSE.txt To be notified when a new version of the Go SDK is released, subscribe to the following feed: https://github.com/oracle/oci-go-sdk/releases.atom Please refer to this link: https://github.com/oracle/oci-go-sdk#help

This is the official Go SDK for Oracle Cloud Infrastructure Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#installing for installation instructions. Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring for configuration instructions. The following example shows how to get started with the SDK. The example belows creates an identityClient struct with the default configuration. It then utilizes the identityClient to list availability domains and prints them out to stdout More examples can be found in the SDK Github repo: https://github.com/oracle/oci-go-sdk/tree/master/example Optional fields are represented with the `mandatory:"false"` tag on input structs. The SDK will omit all optional fields that are nil when making requests. In the case of enum-type fields, the SDK will omit fields whose value is an empty string. The SDK uses pointers for primitive types in many input structs. To aid in the construction of such structs, the SDK provides functions that return a pointer for a given value. For example: Dedicated endpoints are the endpoint templates defined by the service for a specific realm at client level. OCI Go SDK allows you to enable the use of these realm-specific endpoint templates feature at application level and at client level. The value set at client level takes precedence over the value set at the application level. This feature is disabled by default. For reference, please refer https://github.com/oracle/oci-go-sdk/blob/master/example/example_objectstorage_test.go#L222-L251 The SDK exposes functionality that allows the user to customize any http request before is sent to the service. You can do so by setting the `Interceptor` field in any of the `Client` structs. For example: The Interceptor closure gets called before the signing process, thus any changes done to the request will be properly signed and submitted to the service. The SDK exposes a stand-alone signer that can be used to signing custom requests. Related code can be found here: https://github.com/oracle/oci-go-sdk/blob/master/common/http_signer.go. The example below shows how to create a default signer. The signer also allows more granular control on the headers used for signing. For example: You can combine a custom signer with the exposed clients in the SDK. This allows you to add custom signed headers to the request. Following is an example: Bear in mind that some services have a white list of headers that it expects to be signed. Therefore, adding an arbitrary header can result in authentications errors. To see a runnable example, see https://github.com/oracle/oci-go-sdk/blob/master/example/example_identity_test.go For more information on the signing algorithm refer to: https://docs.cloud.oracle.com/Content/API/Concepts/signingrequests.htm Some operations accept or return polymorphic JSON objects. The SDK models such objects as interfaces. Further the SDK provides structs that implement such interfaces. Thus, for all operations that expect interfaces as input, pass the struct in the SDK that satisfies such interface. For example: In the case of a polymorphic response you can type assert the interface to the expected type. For example: An example of polymorphic JSON request handling can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_test.go#L63 When calling a list operation, the operation will retrieve a page of results. To retrieve more data, call the list operation again, passing in the value of the most recent response's OpcNextPage as the value of Page in the next list operation call. When there is no more data the OpcNextPage field will be nil. An example of pagination using this logic can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_pagination_test.go The SDK has a built-in logging mechanism used internally. The internal logging logic is used to record the raw http requests, responses and potential errors when (un)marshalling request and responses. Built-in logging in the SDK is controlled via the environment variable "OCI_GO_SDK_DEBUG" and its contents. The below are possible values for the "OCI_GO_SDK_DEBUG" variable 1. "info" or "i" enables all info logging messages 2. "debug" or "d" enables all debug and info logging messages 3. "verbose" or "v" or "1" enables all verbose, debug and info logging messages 4. "null" turns all logging messages off. If the value of the environment variable does not match any of the above then default logging level is "info". If the environment variable is not present then no logging messages are emitted. You can also enable logs by code. For example This way you enable debug logs by code. The default destination for logging is Stderr and if you want to output log to a file you can set via environment variable "OCI_GO_SDK_LOG_OUTPUT_MODE". The below are possible values 1. "file" or "f" enables all logging output saved to file 2. "combine" or "c" enables all logging output to both stderr and file You can also customize the log file location and name via "OCI_GO_SDK_LOG_FILE" environment variable, the value should be the path to a specific file If this environment variable is not present, the default location will be the project root path Sometimes you may need to wait until an attribute of a resource, such as an instance or a VCN, reaches a certain state. An example of this would be launching an instance and then waiting for the instance to become available, or waiting until a subnet in a VCN has been terminated. You might also want to retry the same operation again if there's network issue etc... This can be accomplished by using the RequestMetadata.RetryPolicy(request level configuration), alternatively, global(all services) or client level RetryPolicy configration is also possible. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_retry_test.go If you are trying to make a PUT/POST API call with binary request body, please make sure the binary request body is resettable, which means the request body should inherit Seeker interface. The Retry behavior Precedence (Highest to lowest) is defined as below:- The OCI Go SDK defines a default retry policy that retries on the errors suitable for retries (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm), for a recommended period of time (up to 7 attempts spread out over at most approximately 1.5 minutes). The default retry policy is defined by : Default Retry-able Errors Below is the list of default retry-able errors for which retry attempts should be made. The following errors should be retried (with backoff). HTTP Code Customer-facing Error Code Apart from the above errors, retries should also be attempted in the following Client Side errors : 1. HTTP Connection timeout 2. Request Connection Errors 3. Request Exceptions 4. Other timeouts (like Read Timeout) The above errors can be avoided through retrying and hence, are classified as the default retry-able errors. Additionally, retries should also be made for Circuit Breaker exceptions (Exceptions raised by Circuit Breaker in an open state) Default Termination Strategy The termination strategy defines when SDKs should stop attempting to retry. In other words, it's the deadline for retries. The OCI SDKs should stop retrying the operation after 7 retry attempts. This means the SDKs will have retried for ~98 seconds or ~1.5 minutes have elapsed due to total delays. SDKs will make a total of 8 attempts. (1 initial request + 7 retries) Default Delay Strategy Default Delay Strategy - The delay strategy defines the amount of time to wait between each of the retry attempts. The default delay strategy chosen for the SDK – Exponential backoff with jitter, using: 1. The base time to use in retry calculations will be 1 second 2. An exponent of 2. When calculating the next retry time, the SDK will raise this to the power of the number of attempts 3. A maximum wait time between calls of 30 seconds (Capped) 4. Added jitter value between 0-1000 milliseconds to spread out the requests Configure and use default retry policy You can set this retry policy for a single request: or for all requests made by a client: or for all requests made by all clients: or setting default retry via environment variable, which is a global switch for all services: Some services enable retry for operations by default, this can be overridden using any alternatives mentioned above. To know which service operations have retries enabled by default, look at the operation's description in the SDK - it will say whether that it has retries enabled by default Some resources may have to be replicated across regions and are only eventually consistent. That means the request to create, update, or delete the resource succeeded, but the resource is not available everywhere immediately. Creating, updating, or deleting any resource in the Identity service is affected by eventual consistency, and doing so may cause other operations in other services to fail until the Identity resource has been replicated. For example, the request to CreateTag in the Identity service in the home region succeeds, but immediately using that created tag in another region in a request to LaunchInstance in the Compute service may fail. If you are creating, updating, or deleting resources in the Identity service, we recommend using an eventually consistent retry policy for any service you access. The default retry policy already deals with eventual consistency. Example: This retry policy will use a different strategy if an eventually consistent change was made in the recent past (called the "eventually consistent window", currently defined to be 4 minutes after the eventually consistent change). This special retry policy for eventual consistency will: 1. make up to 9 attempts (including the initial attempt); if an attempt is successful, no more attempts will be made 2. retry at most until (a) approximately the end of the eventually consistent window or (b) the end of the default retry period of about 1.5 minutes, whichever is farther in the future; if an attempt is successful, no more attempts will be made, and the OCI Go SDK will not wait any longer 3. retry on the error codes 400-RelatedResourceNotAuthorizedOrNotFound, 404-NotAuthorizedOrNotFound, and 409-NotAuthorizedOrResourceAlreadyExists, for which the default retry policy does not retry, in addition to the errors the default retry policy retries on (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm) If there were no eventually consistent actions within the recent past, then this special retry strategy is not used. If you want a retry policy that does not handle eventual consistency in a special way, for example because you retry on all error responses, you can use DefaultRetryPolicyWithoutEventualConsistency or NewRetryPolicyWithOptions with the common.ReplaceWithValuesFromRetryPolicy(common.DefaultRetryPolicyWithoutEventualConsistency()) option: The NewRetryPolicy function also creates a retry policy without eventual consistency. Circuit Breaker can prevent an application repeatedly trying to execute an operation that is likely to fail, allowing it to continue without waiting for the fault to be rectified or wasting CPU cycles, of course, it also enables an application to detect whether the fault has been resolved. If the problem appears to have been rectified, the application can attempt to invoke the operation. Go SDK intergrates sony/gobreaker solution, wraps in a circuit breaker object, which monitors for failures. Once the failures reach a certain threshold, the circuit breaker trips, and all further calls to the circuit breaker return with an error, this also saves the service from being overwhelmed with network calls in case of an outage. Circuit Breaker Configuration Definitions 1. Failure Rate Threshold - The state of the CircuitBreaker changes from CLOSED to OPEN when the failure rate is equal or greater than a configurable threshold. For example when more than 50% of the recorded calls have failed. 2. Reset Timeout - The timeout after which an open circuit breaker will attempt a request if a request is made 3. Failure Exceptions - The list of Exceptions that will be regarded as failures for the circuit. 4. Minimum number of calls/ Volume threshold - Configures the minimum number of calls which are required (per sliding window period) before the CircuitBreaker can calculate the error rate. 1. Failure Rate Threshold - 80% - This means when 80% of the requests calculated for a time window of 120 seconds have failed then the circuit will transition from closed to open. 2. Minimum number of calls/ Volume threshold - A value of 10, for the above defined time window of 120 seconds. 3. Reset Timeout - 30 seconds to wait before setting the breaker to halfOpen state, and trying the action again. 4. Failure Exceptions - The failures for the circuit will only be recorded for the retryable/transient exceptions. This means only the following exceptions will be regarded as failure for the circuit. HTTP Code Customer-facing Error Code Apart from the above, the following client side exceptions will also be treated as a failure for the circuit : 1. HTTP Connection timeout 2. Request Connection Errors 3. Request Exceptions 4. Other timeouts (like Read Timeout) Go SDK enable circuit breaker with default configuration for most of the service clients, if you don't want to enable the solution, can disable the functionality before your application running Go SDK also supports customize Circuit Breaker with specified configurations. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_circuitbreaker_test.go To know which service clients have circuit breakers enabled, look at the service client's description in the SDK - it will say whether that it has circuit breakers enabled by default As a result of the SDK treating responses with a non-2xx HTTP status code as an error, the SDK will produce an error on 3xx responses. This can impact operations which support conditional GETs, such as GetObject() and HeadObject() methods as these can return responses with an HTTP status code of 304 if passed an 'IfNoneMatch' that corresponds to the current etag of the object / bucket. In order to account for this, you should check for status code 304 when an error is produced. For example: The GO SDK uses the net/http package to make calls to OCI services. If your environment requires you to use a proxy server for outgoing HTTP requests then you can set this up in the following ways: 1. Configuring environment variable as described here https://golang.org/pkg/net/http/#ProxyFromEnvironment 2. Modifying the underlying Transport struct for a service client In order to modify the underlying Transport struct in HttpClient, you can do something similar to (sample code for audit service client): The Object Storage service supports multipart uploads to make large object uploads easier by splitting the large object into parts. The Go SDK supports raw multipart upload operations for advanced use cases, as well as a higher level upload class that uses the multipart upload APIs. For links to the APIs used for multipart upload operations, see Managing Multipart Uploads (https://docs.cloud.oracle.com/iaas/Content/Object/Tasks/usingmultipartuploads.htm). Higher level multipart uploads are implemented using the UploadManager, which will: split a large object into parts for you, upload the parts in parallel, and then recombine and commit the parts as a single object in storage. This code sample shows how to use the UploadManager to automatically split an object into parts for upload to simplify interaction with the Object Storage service: https://github.com/oracle/oci-go-sdk/blob/master/example/example_objectstorage_test.go Some response fields are enum-typed. In the future, individual services may return values not covered by existing enums for that field. To address this possibility, every enum-type response field is a modeled as a type that supports any string. Thus if a service returns a value that is not recognized by your version of the SDK, then the response field will be set to this value. When individual services return a polymorphic JSON response not available as a concrete struct, the SDK will return an implementation that only satisfies the interface modeling the polymorphic JSON response. If you are using a version of the SDK released prior to the announcement of a new region, you may need to use a workaround to reach it, depending on whether the region is in the oraclecloud.com realm. A region is a localized geographic area. For more information on regions and how to identify them, see Regions and Availability Domains(https://docs.cloud.oracle.com/iaas/Content/General/Concepts/regions.htm). A realm is a set of regions that share entities. You can identify your realm by looking at the domain name at the end of the network address. For example, the realm for xyz.abc.123.oraclecloud.com is oraclecloud.com. oraclecloud.com Realm: For regions in the oraclecloud.com realm, even if common.Region does not contain the new region, the forward compatibility of the SDK can automatically handle it. You can pass new region names just as you would pass ones that are already defined. For more information on passing region names in the configuration, see Configuring (https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring). For details on common.Region, see (https://github.com/oracle/oci-go-sdk/blob/master/common/common.go). Other Realms: For regions in realms other than oraclecloud.com, you can use the following workarounds to reach new regions with earlier versions of the SDK. NOTE: Be sure to supply the appropriate endpoints for your region. You can overwrite the target host with client.Host: If you are authenticating via instance principals, you can set the authentication endpoint in an environment variable: In order to use a custom CA bundle, you can set the environment variable OCI_DEFAULT_CERTS_PATH to point to the path of custom CA Bundle you want the OCI GO SDK to use while making API calls to the OCI services If you additionally want to set custom leaf/client certs, then you can use the the environment variables OCI_DEFAULT_CLIENT_CERTS_PATH and OCI_DEFAULT_CLIENT_CERTS_PRIVATE_KEY_PATH to set the path of the custom client/leaf cert and the private key respectively. The default refresh interval for custom CA bundle or client certs is 30 minutes. If you want to modify this, then you can configure the refresh interval in minutes by using either the Global property OciGlobalRefreshIntervalForCustomCerts defined in the common package or set the environment variable OCI_DEFAULT_REFRESH_INTERVAL_FOR_CUSTOM_CERTS to set it instead. Please note, that the property OciGlobalRefreshIntervalForCustomCerts has a higher precedence than the environment variable OCI_DEFAULT_REFRESH_INTERVAL_FOR_CUSTOM_CERTS. If this value is negative, then it would be assumed that it is unset. If it is set to 0, then the SDK would disable the custom ca bundle and client cert refresh Got a fix for a bug, or a new feature you'd like to contribute? The SDK is open source and accepting pull requests on GitHub https://github.com/oracle/oci-go-sdk Licensing information available at: https://github.com/oracle/oci-go-sdk/blob/master/LICENSE.txt To be notified when a new version of the Go SDK is released, subscribe to the following feed: https://github.com/oracle/oci-go-sdk/releases.atom Please refer to this link: https://github.com/oracle/oci-go-sdk#help

This is the official Go SDK for Oracle Cloud Infrastructure Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#installing for installation instructions. Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring for configuration instructions. The following example shows how to get started with the SDK. The example belows creates an identityClient struct with the default configuration. It then utilizes the identityClient to list availability domains and prints them out to stdout More examples can be found in the SDK Github repo: https://github.com/oracle/oci-go-sdk/tree/master/example Optional fields are represented with the `mandatory:"false"` tag on input structs. The SDK will omit all optional fields that are nil when making requests. In the case of enum-type fields, the SDK will omit fields whose value is an empty string. The SDK uses pointers for primitive types in many input structs. To aid in the construction of such structs, the SDK provides functions that return a pointer for a given value. For example: The SDK exposes functionality that allows the user to customize any http request before is sent to the service. You can do so by setting the `Interceptor` field in any of the `Client` structs. For example: The Interceptor closure gets called before the signing process, thus any changes done to the request will be properly signed and submitted to the service. The SDK exposes a stand-alone signer that can be used to signing custom requests. Related code can be found here: https://github.com/oracle/oci-go-sdk/blob/master/common/http_signer.go. The example below shows how to create a default signer. The signer also allows more granular control on the headers used for signing. For example: You can combine a custom signer with the exposed clients in the SDK. This allows you to add custom signed headers to the request. Following is an example: Bear in mind that some services have a white list of headers that it expects to be signed. Therefore, adding an arbitrary header can result in authentications errors. To see a runnable example, see https://github.com/oracle/oci-go-sdk/blob/master/example/example_identity_test.go For more information on the signing algorithm refer to: https://docs.cloud.oracle.com/Content/API/Concepts/signingrequests.htm Some operations accept or return polymorphic JSON objects. The SDK models such objects as interfaces. Further the SDK provides structs that implement such interfaces. Thus, for all operations that expect interfaces as input, pass the struct in the SDK that satisfies such interface. For example: In the case of a polymorphic response you can type assert the interface to the expected type. For example: An example of polymorphic JSON request handling can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_test.go#L63 When calling a list operation, the operation will retrieve a page of results. To retrieve more data, call the list operation again, passing in the value of the most recent response's OpcNextPage as the value of Page in the next list operation call. When there is no more data the OpcNextPage field will be nil. An example of pagination using this logic can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_pagination_test.go The SDK has a built-in logging mechanism used internally. The internal logging logic is used to record the raw http requests, responses and potential errors when (un)marshalling request and responses. Built-in logging in the SDK is controlled via the environment variable "OCI_GO_SDK_DEBUG" and its contents. The below are possible values for the "OCI_GO_SDK_DEBUG" variable 1. "info" or "i" enables all info logging messages 2. "debug" or "d" enables all debug and info logging messages 3. "verbose" or "v" or "1" enables all verbose, debug and info logging messages 4. "null" turns all logging messages off. If the value of the environment variable does not match any of the above then default logging level is "info". If the environment variable is not present then no logging messages are emitted. The default destination for logging is Stderr and if you want to output log to a file you can set via environment variable "OCI_GO_SDK_LOG_OUTPUT_MODE". The below are possible values 1. "file" or "f" enables all logging output saved to file 2. "combine" or "c" enables all logging output to both stderr and file You can also customize the log file location and name via "OCI_GO_SDK_LOG_FILE" environment variable, the value should be the path to a specific file If this environment variable is not present, the default location will be the project root path Sometimes you may need to wait until an attribute of a resource, such as an instance or a VCN, reaches a certain state. An example of this would be launching an instance and then waiting for the instance to become available, or waiting until a subnet in a VCN has been terminated. You might also want to retry the same operation again if there's network issue etc... This can be accomplished by using the RequestMetadata.RetryPolicy(request level configuration), alternatively, global(all services) or client level RetryPolicy configration is also possible. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_retry_test.go If you are trying to make a PUT/POST API call with binary request body, please make sure the binary request body is resettable, which means the request body should inherit Seeker interface. The Retry behavior Precedence (Highest to lowest) is defined as below:- The OCI Go SDK defines a default retry policy that retries on the errors suitable for retries (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm), for a recommended period of time (up to 7 attempts spread out over at most approximately 1.5 minutes). The default retry policy is defined by : Default Retry-able Errors Below is the list of default retry-able errors for which retry attempts should be made. The following errors should be retried (with backoff). HTTP Code Customer-facing Error Code Apart from the above errors, retries should also be attempted in the following Client Side errors : 1. HTTP Connection timeout 2. Request Connection Errors 3. Request Exceptions 4. Other timeouts (like Read Timeout) The above errors can be avoided through retrying and hence, are classified as the default retry-able errors. Additionally, retries should also be made for Circuit Breaker exceptions (Exceptions raised by Circuit Breaker in an open state) Default Termination Strategy The termination strategy defines when SDKs should stop attempting to retry. In other words, it's the deadline for retries. The OCI SDKs should stop retrying the operation after 7 retry attempts. This means the SDKs will have retried for ~98 seconds or ~1.5 minutes have elapsed due to total delays. SDKs will make a total of 8 attempts. (1 initial request + 7 retries) Default Delay Strategy Default Delay Strategy - The delay strategy defines the amount of time to wait between each of the retry attempts. The default delay strategy chosen for the SDK – Exponential backoff with jitter, using: 1. The base time to use in retry calculations will be 1 second 2. An exponent of 2. When calculating the next retry time, the SDK will raise this to the power of the number of attempts 3. A maximum wait time between calls of 30 seconds (Capped) 4. Added jitter value between 0-1000 milliseconds to spread out the requests Configure and use default retry policy You can set this retry policy for a single request: or for all requests made by a client: or for all requests made by all clients: or setting default retry via environment varaible, which is a global switch for all services: Some services enable retry for operations by default, this can be overridden using any alternatives mentioned above. To know which service operations have retries enabled by default, look at the operation's description in the SDK - it will say whether that it has retries enabled by default Some resources may have to be replicated across regions and are only eventually consistent. That means the request to create, update, or delete the resource succeeded, but the resource is not available everywhere immediately. Creating, updating, or deleting any resource in the Identity service is affected by eventual consistency, and doing so may cause other operations in other services to fail until the Identity resource has been replicated. For example, the request to CreateTag in the Identity service in the home region succeeds, but immediately using that created tag in another region in a request to LaunchInstance in the Compute service may fail. If you are creating, updating, or deleting resources in the Identity service, we recommend using an eventually consistent retry policy for any service you access. The default retry policy already deals with eventual consistency. Example: This retry policy will use a different strategy if an eventually consistent change was made in the recent past (called the "eventually consistent window", currently defined to be 4 minutes after the eventually consistent change). This special retry policy for eventual consistency will: 1. make up to 9 attempts (including the initial attempt); if an attempt is successful, no more attempts will be made 2. retry at most until (a) approximately the end of the eventually consistent window or (b) the end of the default retry period of about 1.5 minutes, whichever is farther in the future; if an attempt is successful, no more attempts will be made, and the OCI Go SDK will not wait any longer 3. retry on the error codes 400-RelatedResourceNotAuthorizedOrNotFound, 404-NotAuthorizedOrNotFound, and 409-NotAuthorizedOrResourceAlreadyExists, for which the default retry policy does not retry, in addition to the errors the default retry policy retries on (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm) If there were no eventually consistent actions within the recent past, then this special retry strategy is not used. If you want a retry policy that does not handle eventual consistency in a special way, for example because you retry on all error responses, you can use DefaultRetryPolicyWithoutEventualConsistency or NewRetryPolicyWithOptions with the common.ReplaceWithValuesFromRetryPolicy(common.DefaultRetryPolicyWithoutEventualConsistency()) option: The NewRetryPolicy function also creates a retry policy without eventual consistency. Circuit Breaker can prevent an application repeatedly trying to execute an operation that is likely to fail, allowing it to continue without waiting for the fault to be rectified or wasting CPU cycles, of course, it also enables an application to detect whether the fault has been resolved. If the problem appears to have been rectified, the application can attempt to invoke the operation. Go SDK intergrates sony/gobreaker solution, wraps in a circuit breaker object, which monitors for failures. Once the failures reach a certain threshold, the circuit breaker trips, and all further calls to the circuit breaker return with an error, this also saves the service from being overwhelmed with network calls in case of an outage. Circuit Breaker Configuration Definitions 1. Failure Rate Threshold - The state of the CircuitBreaker changes from CLOSED to OPEN when the failure rate is equal or greater than a configurable threshold. For example when more than 50% of the recorded calls have failed. 2. Reset Timeout - The timeout after which an open circuit breaker will attempt a request if a request is made 3. Failure Exceptions - The list of Exceptions that will be regarded as failures for the circuit. 4. Minimum number of calls/ Volume threshold - Configures the minimum number of calls which are required (per sliding window period) before the CircuitBreaker can calculate the error rate. 1. Failure Rate Threshold - 80% - This means when 80% of the requests calculated for a time window of 120 seconds have failed then the circuit will transition from closed to open. 2. Minimum number of calls/ Volume threshold - A value of 10, for the above defined time window of 120 seconds. 3. Reset Timeout - 30 seconds to wait before setting the breaker to halfOpen state, and trying the action again. 4. Failure Exceptions - The failures for the circuit will only be recorded for the retryable/transient exceptions. This means only the following exceptions will be regarded as failure for the circuit. HTTP Code Customer-facing Error Code Apart from the above, the following client side exceptions will also be treated as a failure for the circuit : 1. HTTP Connection timeout 2. Request Connection Errors 3. Request Exceptions 4. Other timeouts (like Read Timeout) Go SDK enable circuit breaker with default configuration for most of the service clients, if you don't want to enable the solution, can disable the functionality before your application running Go SDK also supports customize Circuit Breaker with specified configurations. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_circuitbreaker_test.go To know which service clients have circuit breakers enabled, look at the service client's description in the SDK - it will say whether that it has circuit breakers enabled by default The GO SDK uses the net/http package to make calls to OCI services. If your environment requires you to use a proxy server for outgoing HTTP requests then you can set this up in the following ways: 1. Configuring environment variable as described here https://golang.org/pkg/net/http/#ProxyFromEnvironment 2. Modifying the underlying Transport struct for a service client In order to modify the underlying Transport struct in HttpClient, you can do something similar to (sample code for audit service client): The Object Storage service supports multipart uploads to make large object uploads easier by splitting the large object into parts. The Go SDK supports raw multipart upload operations for advanced use cases, as well as a higher level upload class that uses the multipart upload APIs. For links to the APIs used for multipart upload operations, see Managing Multipart Uploads (https://docs.cloud.oracle.com/iaas/Content/Object/Tasks/usingmultipartuploads.htm). Higher level multipart uploads are implemented using the UploadManager, which will: split a large object into parts for you, upload the parts in parallel, and then recombine and commit the parts as a single object in storage. This code sample shows how to use the UploadManager to automatically split an object into parts for upload to simplify interaction with the Object Storage service: https://github.com/oracle/oci-go-sdk/blob/master/example/example_objectstorage_test.go Some response fields are enum-typed. In the future, individual services may return values not covered by existing enums for that field. To address this possibility, every enum-type response field is a modeled as a type that supports any string. Thus if a service returns a value that is not recognized by your version of the SDK, then the response field will be set to this value. When individual services return a polymorphic JSON response not available as a concrete struct, the SDK will return an implementation that only satisfies the interface modeling the polymorphic JSON response. If you are using a version of the SDK released prior to the announcement of a new region, you may need to use a workaround to reach it, depending on whether the region is in the oraclecloud.com realm. A region is a localized geographic area. For more information on regions and how to identify them, see Regions and Availability Domains(https://docs.cloud.oracle.com/iaas/Content/General/Concepts/regions.htm). A realm is a set of regions that share entities. You can identify your realm by looking at the domain name at the end of the network address. For example, the realm for xyz.abc.123.oraclecloud.com is oraclecloud.com. oraclecloud.com Realm: For regions in the oraclecloud.com realm, even if common.Region does not contain the new region, the forward compatibility of the SDK can automatically handle it. You can pass new region names just as you would pass ones that are already defined. For more information on passing region names in the configuration, see Configuring (https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring). For details on common.Region, see (https://github.com/oracle/oci-go-sdk/blob/master/common/common.go). Other Realms: For regions in realms other than oraclecloud.com, you can use the following workarounds to reach new regions with earlier versions of the SDK. NOTE: Be sure to supply the appropriate endpoints for your region. You can overwrite the target host with client.Host: If you are authenticating via instance principals, you can set the authentication endpoint in an environment variable: Got a fix for a bug, or a new feature you'd like to contribute? The SDK is open source and accepting pull requests on GitHub https://github.com/oracle/oci-go-sdk Licensing information available at: https://github.com/oracle/oci-go-sdk/blob/master/LICENSE.txt To be notified when a new version of the Go SDK is released, subscribe to the following feed: https://github.com/oracle/oci-go-sdk/releases.atom Please refer to this link: https://github.com/oracle/oci-go-sdk#help

Package color is an ANSI color package to output colorized or SGR defined output to the standard output. The API can be used in several way, pick one that suits you. Use simple and default helper functions with predefined foreground colors: However there are times where custom color mixes are required. Below are some examples to create custom color objects and use the print functions of each separate color object. You can create PrintXxx functions to simplify even more: Or create SprintXxx functions to mix strings with other non-colorized strings: Windows support is enabled by default. All Print functions works as intended. However only for color.SprintXXX functions, user should use fmt.FprintXXX and set the output to color.Output: Using with existing code is possible. Just use the Set() method to set the standard output to the given parameters. That way a rewrite of an existing code is not required. There might be a case where you want to disable color output (for example to pipe the standard output of your app to somewhere else). `Color` has support to disable colors both globally and for single color definition. For example suppose you have a CLI app and a `--no-color` bool flag. You can easily disable the color output with: It also has support for single color definitions (local). You can disable/enable color output on the fly:

gotest is a tiny program that shells out to `go test` and prints the output in color.

Package dom provides GopherJS bindings for the JavaScript DOM APIs. This package is an in progress effort of providing idiomatic Go bindings for the DOM, wrapping the JavaScript DOM APIs. The API is neither complete nor frozen yet, but a great amount of the DOM is already useable. While the package tries to be idiomatic Go, it also tries to stick closely to the JavaScript APIs, so that one does not need to learn a new set of APIs if one is already familiar with it. One decision that hasn't been made yet is what parts exactly should be part of this package. It is, for example, possible that the canvas APIs will live in a separate package. On the other hand, types such as StorageEvent (the event that gets fired when the HTML5 storage area changes) will be part of this package, simply due to how the DOM is structured – even if the actual storage APIs might live in a separate package. This might require special care to avoid circular dependencies. The documentation for some of the identifiers is based on the MDN Web Docs by Mozilla Contributors (https://developer.mozilla.org/en-US/docs/Web/API), licensed under CC-BY-SA 2.5 (https://creativecommons.org/licenses/by-sa/2.5/). The usual entry point of using the dom package is by using the GetWindow() function which will return a Window, from which you can get things such as the current Document. The DOM has a big amount of different element and event types, but they all follow three interfaces. All functions that work on or return generic elements/events will return one of the three interfaces Element, HTMLElement or Event. In these interface values there will be concrete implementations, such as HTMLParagraphElement or FocusEvent. It's also not unusual that values of type Element also implement HTMLElement. In all cases, type assertions can be used. Example: Several functions in the JavaScript DOM return "live" collections of elements, that is collections that will be automatically updated when elements get removed or added to the DOM. Our bindings, however, return static slices of elements that, once created, will not automatically reflect updates to the DOM. This is primarily done so that slices can actually be used, as opposed to a form of iterator, but also because we think that magically changing data isn't Go's nature and that snapshots of state are a lot easier to reason about. This does not, however, mean that all objects are snapshots. Elements, events and generally objects that aren't slices or maps are simple wrappers around JavaScript objects, and as such attributes as well as method calls will always return the most current data. To reflect this behaviour, these bindings use pointers to make the semantics clear. Consider the following example: The above example will print `true`. Some objects in the JS API have two versions of attributes, one that returns a string and one that returns a DOMTokenList to ease manipulation of string-delimited lists. Some other objects only provide DOMTokenList, sometimes DOMSettableTokenList. To simplify these bindings, only the DOMTokenList variant will be made available, by the type TokenList. In cases where the string attribute was the only way to completely replace the value, our TokenList will provide Set([]string) and SetString(string) methods, which will be able to accomplish the same. Additionally, our TokenList will provide methods to convert it to strings and slices. This package has a relatively stable API. However, there will be backwards incompatible changes from time to time. This is because the package isn't complete yet, as well as because the DOM is a moving target, and APIs do change sometimes. While an attempt is made to reduce changing function signatures to a minimum, it can't always be guaranteed. Sometimes mistakes in the bindings are found that require changing arguments or return values. Interfaces defined in this package may also change on a semi-regular basis, as new methods are added to them. This happens because the bindings aren't complete and can never really be, as new features are added to the DOM.

Package chalk is a package for styling terminal/console output. There are three main components: There are eight default colors: black, red, green, yellow, blue, magenta, cyan and white. You can use them in two main ways (note the need for the reset color if you don't use Color()): There are seven default text styles: bold, dim, italic, underline, inverse, hidden and strikethrough. Unlike colors, you should only really use TextStyles in the following manner: Styles are where all the business really is. Styles can have a foreground color, a background color and a text style (sweet!). They're also pretty simply to make, you just need a starting point: When a color is your starting point for a style, it will be the foreground color, when a style is your starting point, well, yeah, it's your style's text style. You can also alter a style's foreground, background or text style in a builder-esque pattern. Like both Colors and TextStyles you can style specific segments of text with: Like Colors, you can also print styles explicitly, but you'll need to reset your console's colors with chalk.Reset if you use them this way: Be aware though, that this (second) way of using styles will not add the text style (as text styles require more specific end codes). So if you want to fully utilize styles, use myStyle.Style() (unless you only care about print your text with a specific foreground and background, then printing the style is awesome too!). Have fun!

Package q provides quick and dirty debugging output for tired programmers. q.Q() is a fast way to pretty-print variables. It's easier than typing fmt.Printf("%#v", whatever). The output will be colorized and nicely formatted. The output goes to $TMPDIR/q, away from the noise of stdout. q exports a single Q() function. This is how you use it:

Ivy is an interpreter for an APL-like language. It is a plaything and a work in progress. Unlike APL, the input is ASCII and the results are exact (but see the next paragraph). It uses exact rational arithmetic so it can handle arbitrary precision. Values to be input may be integers (3, -1), rationals (1/3, -45/67) or floating point values (1e3, -1.5 (representing 1000 and -3/2)). Some functions such as sqrt are irrational. When ivy evaluates an irrational function, the result is stored in a high-precision floating-point number (default 256 bits of mantissa). Thus when using irrational functions, the values have high precision but are not exact. Unlike in most other languages, operators always have the same precedence and expressions are evaluated in right-associative order. That is, unary operators apply to everything to the right, and binary operators apply to the operand immediately to the left and to everything to the right. Thus, 3*4+5 is 27 (it groups as 3*(4+5)) and iota 3+2 is 1 2 3 4 5 while 3+iota 2 is 4 5. A vector is a single operand, so 1 2 3 + 3 + 3 4 5 is (1 2 3) + 3 + (3 4 5), or 7 9 11. As a special but important case, note that 1/3, with no intervening spaces, is a single rational number, not the expression 1 divided by 3. This can affect precedence: 3/6*4 is 2 while 3 / 6*4 is 1/8 since the spacing turns the / into a division operator. Use parentheses or spaces to disambiguate: 3/(6*4) or 3 /6*4. Ivy has complex numbers, which are constructed using the unary or binary j operator. As with rationals, the token 1j2 (the representation of 1+2i) is a single token. The individual parts can be rational, so 1/2j-3/2 is the complex number 0.5-1.5i and scans as a single value. Indexing uses [] notation: x[1], x[1; 2], and so on. Indexing by a vector selects multiple elements: x[1 2] creates a new item from x[1] and x[2]. An empty index slot is a shorthand for all the elements along that dimension, so x[] is equivalent to x, and x[;3] gives the third column of two-dimensional array x. Only a subset of APL's functionality is implemented, but all numerical operations are supported. Semicolons separate multiple statements on a line. Variables are alphanumeric and are assigned with the = operator. Assignment is an expression. After each successful expression evaluation, the result is stored in the variable called _ (underscore) so it can be used in the next expression. The APL operators, adapted from https://en.wikipedia.org/wiki/APL_syntax_and_symbols, and their correspondence are listed here. The correspondence is incomplete and inexact. Unary operators Binary operators Operators and axis indicator Type-converting operations The constants e (base of natural logarithms) and pi (π) are pre-defined to high precision, about 3000 decimal digits truncated according to the floating point precision setting. Strings are vectors of "chars", which are Unicode code points (not bytes). Syntactically, string literals are very similar to those in Go, with back-quoted raw strings and double-quoted interpreted strings. Unlike Go, single-quoted strings are equivalent to double-quoted, a nod to APL syntax. A string with a single char is just a singleton char value; all others are vectors. Thus “, "", and ” are empty vectors, `a`, "a", and 'a' are equivalent representations of a single char, and `ab`, `a` `b`, "ab", "a" "b", 'ab', and 'a' 'b' are equivalent representations of a two-char vector. Unlike in Go, a string in ivy comprises code points, not bytes; as such it can contain only valid Unicode values. Thus in ivy "\x80" is illegal, although it is a legal one-byte string in Go. Strings can be printed. If a vector contains only chars, it is printed without spaces between them. Chars have restricted operations. Printing, comparison, indexing and so on are legal but arithmetic is not, and chars cannot be converted automatically into other singleton values (ints, floats, and so on). The unary operators char and code enable transcoding between integer and char values. Users can define unary and binary operators, which then behave just like built-in operators. Both a unary and a binary operator may be defined for the same name. The syntax of a definition is the 'op' keyword, the operator and formal arguments, an equals sign, and then the body. The names of the operator and its arguments must be identifiers. For unary operators, write "op name arg"; for binary write "op leftarg name rightarg". The final expression in the body is the return value. Operators may have recursive definitions; see the paragraph about conditional execution for an example. The body may be a single line (possibly containing semicolons) on the same line as the 'op', or it can be multiple lines. For a multiline entry, there is a newline after the '=' and the definition ends at the first blank line (ignoring spaces). Conditional execution is done with the ":" binary conditional return operator, which is valid only within the code for a user-defined operator. The left operand must be a scalar. If it is non-zero, the right operand is returned as the value of the function. Otherwise, execution continues normally. The ":" operator has a lower precedence than any other operator; in effect it breaks the line into two separate expressions. Example: average of a vector (unary): Example: n largest entries in a vector (binary): Example: multiline operator definition (binary): Example: primes less than N (unary): Example: greatest common divisor (binary): On mobile platforms only, due to I/O restrictions, user-defined operators must be presented on a single line. Use semicolons to separate expressions: To declare an operator but not define it, omit the equals sign and what follows. Within a user-defined operator body, identifiers are local to the invocation if they are assigned before being read, and global if read before being written. To write to a global without reading it first, insert an unused read. To remove the definition of a unary or binary user-defined operator, Ivy accepts a number of special commands, introduced by a right paren at the beginning of the line. Most report the current value if a new value is not specified. For these commands, numbers are always read and printed base 10 and must be non-negative on input.

Package gotree create and print tree.

Package twilio simplifies interaction with the Twilio API. The twilio-go library should be your first choice for interacting with the Twilio API; it offers forward compatibility, very fine-grained control of API access, best-in-class control over how long to wait for requests to complete, and great debuggability when things go wrong. Get started by creating a Client: All of the Twilio resources are available as properties on the Client. Let's walk through some of the example use cases. Resources that can create new methods take a url.Values as an argument, and pass all arguments to the Twilio API. This method ensures forward compatibility; any new arguments that get invented can be added in client-side code. Call Get() with a particular sid. Call Update() with a particular sid and a url.Values. There are two flavors of interaction. First, if all you want is a single Page of resources, optionally with filters: To control the page size, set "PageSize": "N" in the url.Values{} field. Twilio defaults to returning 50 results per page if this is not set. Alternatively you can get a PageIterator and call Next() to repeatedly retrieve pages. Twilio Monitor subresources are available on the Client under the Monitor field, e.g. There are several custom types and helper functions designed to make your job easier. Where possible, we try to parse values from the Twilio API into a datatype that makes more sense. For example, we try to parse timestamps into Time values, durations into time.Duration, integer values into uints, even if the API returns them as strings, e.g. "3". All phone numbers have type PhoneNumber. By default these are E.164, but can be printed in Friendly()/Local() variations as well. Any times returned from the Twilio API are of type TwilioTime, which has two properties - Valid (a bool), and Time (a time.Time). Check Valid before using the related Time. There are constants for every Status in the API, for example StatusQueued, which has the value "queued". You can call Friendly() on any Status to get an uppercase version of the status, e.g.

Goversion scans a directory tree and, for every executable it finds, prints the Go version used to build that executable. Usage: The list of paths can be individual files or directories; if the latter, goversion scans all files in the directory tree, not following symlinks. Goversion scans inside of tar or gzipped tar archives that it finds (named *.tar, *.tar.gz, or *.tgz), but not recursively. The -crypto flag causes goversion to print additional information about the crypto libraries linked into each executable. The -m flag causes goversion to print the list of modules found in the executable, along with version information. The -mh flag causes goversion to print the list of modules found in the executable, along with version and hash information. The -v flag causes goversion to print information about every file it considers. Scan /usr/bin for Go binaries and print their versions:

Package prettyjson provides JSON pretty print.

Package telnet provides TELNET and TELNETS client and server implementations in a style similar to the "net/http" library that is part of the Go standard library, including support for "middleware"; TELNETS is secure TELNET, with the TELNET protocol over a secured TLS (or SSL) connection. ListenAndServe starts a (un-secure) TELNET server with a given address and handler. ListenAndServeTLS starts a (secure) TELNETS server with a given address and handler, using the specified "cert.pem" and "key.pem" files. Example TELNET Client: DialToAndCall creates a (un-secure) TELNET client, which connects to a given address using the specified caller. Example TELNETS Client: DialToAndCallTLS creates a (secure) TELNETS client, which connects to a given address using the specified caller. If you are communicating over the open Internet, you should be using (the secure) TELNETS protocol and ListenAndServeTLS. If you are communicating just on localhost, then using just (the un-secure) TELNET protocol and telnet.ListenAndServe may be OK. If you are not sure which to use, use TELNETS and ListenAndServeTLS. The previous 2 exaple servers were very very simple. Specifically, they just echoed back whatever you submitted to it. If you typed: ... it would send back: (Exactly the same data you sent it.) A more useful TELNET server can be made using the "github.com/reiver/go-telnet/telsh" sub-package. The `telsh` sub-package provides "middleware" that enables you to create a "shell" interface (also called a "command line interface" or "CLI") which most people would expect when using TELNET OR TELNETS. For example: Note that in the example, so far, we have registered 2 commands: `date` and `animate`. For this to actually work, we need to have code for the `date` and `animate` commands. The actual implemenation for the `date` command could be done like the following: Note that your "real" work is in the `dateHandlerFunc` func. And the actual implementation for the `animate` command could be done as follows: Again, note that your "real" work is in the `animateHandlerFunc` func. If you are using the telnet.ListenAndServeTLS func or the telnet.Server.ListenAndServeTLS method, you will need to supply "cert.pem" and "key.pem" files. If you do not already have these files, the Go soure code contains a tool for generating these files for you. It can be found at: So, for example, if your `$GOROOT` is the "/usr/local/go" directory, then it would be at: If you run the command: ... then you get the help information for "generate_cert.go". Of course, you would replace or set `$GOROOT` with whatever your path actually is. Again, for example, if your `$GOROOT` is the "/usr/local/go" directory, then it would be: To demonstrate the usage of "generate_cert.go", you might run the following to generate certificates that were bound to the hosts `127.0.0.1` and `localhost`: If you are not sure where "generate_cert.go" is on your computer, on Linux and Unix based systems, you might be able to find the file with the command: (If it finds it, it should output the full path to this file.) You can make a simple (un-secure) TELNET client with code like the following: You can make a simple (secure) TELNETS client with code like the following: The TELNET protocol is best known for providing a means of connecting to a remote computer, using a (text-based) shell interface, and being able to interact with it, (more or less) as if you were sitting at that computer. (Shells are also known as command-line interfaces or CLIs.) Although this was the original usage of the TELNET protocol, it can be (and is) used for other purposes as well. The TELNET protocol came from an era in computing when text-based shell interface where the common way of interacting with computers. The common interface for computers during this era was a keyboard and a monochromatic (i.e., single color) text-based monitors called "video terminals". (The word "video" in that era of computing did not refer to things such as movies. But instead was meant to contrast it with paper. In particular, the teletype machines, which were typewriter like devices that had a keyboard, but instead of having a monitor had paper that was printed onto.) In that era, in the early days of office computers, it was rare that an individual would have a computer at their desk. (A single computer was much too expensive.) Instead, there would be a single central computer that everyone would share. The style of computer used (for the single central shared computer) was called a "mainframe". What individuals would have at their desks, instead of their own compuer, would be some type of video terminal. The different types of video terminals had named such as: • VT52 • VT100 • VT220 • VT240 ("VT" in those named was short for "video terminal".) To understand this era, we need to go back a bit in time to what came before it: teletypes. Terminal codes (also sometimes called 'terminal control codes') are used to issue various kinds of commands to the terminal. (Note that 'terminal control codes' are a completely separate concept for 'TELNET commands', and the two should NOT be conflated or confused.) The most common types of 'terminal codes' are the 'ANSI escape codes'. (Although there are other types too.) ANSI escape codes (also sometimes called 'ANSI escape sequences') are a common type of 'terminal code' used to do things such as: • moving the cursor, • erasing the display, • erasing the line, • setting the graphics mode, • setting the foregroup color, • setting the background color, • setting the screen resolution, and • setting keyboard strings. One of the abilities of ANSI escape codes is to set the foreground color. Here is a table showing codes for this: (Note that in the `[]byte` that the first `byte` is the number `27` (which is the "escape" character) where the third and fouth characters are the **not** number literals, but instead character literals `'3'` and whatever.) Another of the abilities of ANSI escape codes is to set the background color. (Note that in the `[]byte` that the first `byte` is the number `27` (which is the "escape" character) where the third and fouth characters are the **not** number literals, but instead character literals `'4'` and whatever.) In Go code, if I wanted to use an ANSI escape code to use a blue background, a white foreground, and bold, I could do that with the ANSI escape code: Note that that start with byte value 27, which we have encoded as hexadecimal as \x1b. Followed by the '[' character. Coming after that is the sub-string "44", which is the code that sets our background color to blue. We follow that with the ';' character (which separates codes). And the after that comes the sub-string "37", which is the code that set our foreground color to white. After that, we follow with another ";" character (which, again, separates codes). And then we follow it the sub-string "1", which is the code that makes things bold. And finally, the ANSI escape sequence is finished off with the 'm' character. To show this in a more complete example, our `dateHandlerFunc` from before could incorporate ANSI escape sequences as follows: Note that in that example, in addition to using the ANSI escape sequence "\x1b[44;37;1m" to set the background color to blue, set the foreground color to white, and make it bold, we also used the ANSI escape sequence "\x1b[0m" to reset the background and foreground colors and boldness back to "normal".

This is the official Go SDK for Oracle Cloud Infrastructure Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#installing for installation instructions. Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring for configuration instructions. The following example shows how to get started with the SDK. The example belows creates an identityClient struct with the default configuration. It then utilizes the identityClient to list availability domains and prints them out to stdout More examples can be found in the SDK Github repo: https://github.com/oracle/oci-go-sdk/tree/master/example Optional fields are represented with the `mandatory:"false"` tag on input structs. The SDK will omit all optional fields that are nil when making requests. In the case of enum-type fields, the SDK will omit fields whose value is an empty string. The SDK uses pointers for primitive types in many input structs. To aid in the construction of such structs, the SDK provides functions that return a pointer for a given value. For example: The SDK exposes functionality that allows the user to customize any http request before is sent to the service. You can do so by setting the `Interceptor` field in any of the `Client` structs. For example: The Interceptor closure gets called before the signing process, thus any changes done to the request will be properly signed and submitted to the service. The SDK exposes a stand-alone signer that can be used to signing custom requests. Related code can be found here: https://github.com/oracle/oci-go-sdk/blob/master/common/http_signer.go. The example below shows how to create a default signer. The signer also allows more granular control on the headers used for signing. For example: You can combine a custom signer with the exposed clients in the SDK. This allows you to add custom signed headers to the request. Following is an example: Bear in mind that some services have a white list of headers that it expects to be signed. Therefore, adding an arbitrary header can result in authentications errors. To see a runnable example, see https://github.com/oracle/oci-go-sdk/blob/master/example/example_identity_test.go For more information on the signing algorithm refer to: https://docs.cloud.oracle.com/Content/API/Concepts/signingrequests.htm Some operations accept or return polymorphic JSON objects. The SDK models such objects as interfaces. Further the SDK provides structs that implement such interfaces. Thus, for all operations that expect interfaces as input, pass the struct in the SDK that satisfies such interface. For example: In the case of a polymorphic response you can type assert the interface to the expected type. For example: An example of polymorphic JSON request handling can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_test.go#L63 When calling a list operation, the operation will retrieve a page of results. To retrieve more data, call the list operation again, passing in the value of the most recent response's OpcNextPage as the value of Page in the next list operation call. When there is no more data the OpcNextPage field will be nil. An example of pagination using this logic can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_pagination_test.go The SDK has a built-in logging mechanism used internally. The internal logging logic is used to record the raw http requests, responses and potential errors when (un)marshalling request and responses. Built-in logging in the SDK is controlled via the environment variable "OCI_GO_SDK_DEBUG" and its contents. The below are possible values for the "OCI_GO_SDK_DEBUG" variable 1. "info" or "i" enables all info logging messages 2. "debug" or "d" enables all debug and info logging messages 3. "verbose" or "v" or "1" enables all verbose, debug and info logging messages 4. "null" turns all logging messages off. If the value of the environment variable does not match any of the above then default logging level is "info". If the environment variable is not present then no logging messages are emitted. The default destination for logging is Stderr and if you want to output log to a file you can set via environment variable "OCI_GO_SDK_LOG_OUTPUT_MODE". The below are possible values 1. "file" or "f" enables all logging output saved to file 2. "combine" or "c" enables all logging output to both stderr and file You can also customize the log file location and name via "OCI_GO_SDK_LOG_FILE" environment variable, the value should be the path to a specific file If this environment variable is not present, the default location will be the project root path Sometimes you may need to wait until an attribute of a resource, such as an instance or a VCN, reaches a certain state. An example of this would be launching an instance and then waiting for the instance to become available, or waiting until a subnet in a VCN has been terminated. You might also want to retry the same operation again if there's network issue etc... This can be accomplished by using the RequestMetadata.RetryPolicy. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_retry_test.go The GO SDK uses the net/http package to make calls to OCI services. If your environment requires you to use a proxy server for outgoing HTTP requests then you can set this up in the following ways: 1. Configuring environment variable as described here https://golang.org/pkg/net/http/#ProxyFromEnvironment 2. Modifying the underlying Transport struct for a service client In order to modify the underlying Transport struct in HttpClient, you can do something similar to (sample code for audit service client): The Object Storage service supports multipart uploads to make large object uploads easier by splitting the large object into parts. The Go SDK supports raw multipart upload operations for advanced use cases, as well as a higher level upload class that uses the multipart upload APIs. For links to the APIs used for multipart upload operations, see Managing Multipart Uploads (https://docs.cloud.oracle.com/iaas/Content/Object/Tasks/usingmultipartuploads.htm). Higher level multipart uploads are implemented using the UploadManager, which will: split a large object into parts for you, upload the parts in parallel, and then recombine and commit the parts as a single object in storage. This code sample shows how to use the UploadManager to automatically split an object into parts for upload to simplify interaction with the Object Storage service: https://github.com/oracle/oci-go-sdk/blob/master/example/example_objectstorage_test.go Some response fields are enum-typed. In the future, individual services may return values not covered by existing enums for that field. To address this possibility, every enum-type response field is a modeled as a type that supports any string. Thus if a service returns a value that is not recognized by your version of the SDK, then the response field will be set to this value. When individual services return a polymorphic JSON response not available as a concrete struct, the SDK will return an implementation that only satisfies the interface modeling the polymorphic JSON response. If you are using a version of the SDK released prior to the announcement of a new region, you may need to use a workaround to reach it, depending on whether the region is in the oraclecloud.com realm. A region is a localized geographic area. For more information on regions and how to identify them, see Regions and Availability Domains(https://docs.cloud.oracle.com/iaas/Content/General/Concepts/regions.htm). A realm is a set of regions that share entities. You can identify your realm by looking at the domain name at the end of the network address. For example, the realm for xyz.abc.123.oraclecloud.com is oraclecloud.com. oraclecloud.com Realm: For regions in the oraclecloud.com realm, even if common.Region does not contain the new region, the forward compatibility of the SDK can automatically handle it. You can pass new region names just as you would pass ones that are already defined. For more information on passing region names in the configuration, see Configuring (https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring). For details on common.Region, see (https://github.com/oracle/oci-go-sdk/blob/master/common/common.go). Other Realms: For regions in realms other than oraclecloud.com, you can use the following workarounds to reach new regions with earlier versions of the SDK. NOTE: Be sure to supply the appropriate endpoints for your region. You can overwrite the target host with client.Host: If you are authenticating via instance principals, you can set the authentication endpoint in an environment variable: Got a fix for a bug, or a new feature you'd like to contribute? The SDK is open source and accepting pull requests on GitHub https://github.com/oracle/oci-go-sdk Licensing information available at: https://github.com/oracle/oci-go-sdk/blob/master/LICENSE.txt To be notified when a new version of the Go SDK is released, subscribe to the following feed: https://github.com/oracle/oci-go-sdk/releases.atom Please refer to this link: https://github.com/oracle/oci-go-sdk#help

Package jet is a complete solution for efficient and high performance database access, consisting of type-safe SQL builder with code generation and automatic query result data mapping. Jet currently supports PostgreSQL, MySQL, MariaDB and SQLite. Future releases will add support for additional databases. Use the command bellow to add jet as a dependency into go.mod project: Jet generator can be installed in one of the following ways: (Go1.16+) Install jet generator using go install: go install github.com/go-jet/jet/v2/cmd/jet@latest Install jet generator to GOPATH/bin folder: cd $GOPATH/src/ && GO111MODULE=off go get -u github.com/go-jet/jet/cmd/jet Install jet generator into specific folder: git clone https://github.com/go-jet/jet.git cd jet && go build -o dir_path ./cmd/jet Make sure that the destination folder is added to the PATH environment variable. Jet requires already defined database schema(with tables, enums etc), so that jet generator can generate SQL Builder and Model files. File generation is very fast, and can be added as every pre-build step. Sample command: Before we can write SQL queries in Go, we need to import generated SQL builder and model types: To write postgres SQL queries we import: Then we can write the SQL query: Now we can run the statement and store the result into desired destination: We can print a statement to see SQL query and arguments sent to postgres server: Output: If we print destination as json, we'll get: Detail info about all statements, features and use cases can be found at project wiki page - https://github.com/go-jet/jet/wiki.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. - UTF-8 support - Choice of measurement unit, page format and margins - Page header and footer management - Automatic page breaks, line breaks, and text justification - Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images - Colors, gradients and alpha channel transparency - Outline bookmarks - Internal and external links - TrueType, Type1 and encoding support - Page compression - Lines, Bézier curves, arcs, and ellipses - Rotation, scaling, skewing, translation, and mirroring - Clipping - Document protection - Layers - Templates - Barcodes - Charting facility - Import PDFs as templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. gofpdf supports UTF-8 TrueType fonts and “right-to-left” languages. Note that Chinese, Japanese, and Korean characters may not be included in many general purpose fonts. For these languages, a specialized font (for example, NotoSansSC for simplified Chinese) can be used. Also, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. This repository will not be maintained, at least for some unknown duration. But it is hoped that gofpdf has a bright future in the open source world. Due to Go’s promise of compatibility, gofpdf should continue to function without modification for a longer time than would be the case with many other languages. Forks should be based on the last viable commit. Tools such as active-forks can be used to select a fork that looks promising for your needs. If a particular fork looks like it has taken the lead in attracting followers, this README will be updated to point people in that direction. The efforts of all contributors to this project have been deeply appreciated. Best wishes to all of you. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running go test ./... is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you’ll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory and if the third argument to ComparePDFFiles() in internal/example/example.go is true. (By default it is false.) The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). You should use AddUTF8Font() or AddUTF8FontFromBytes() to add a TrueType UTF-8 encoded font. Use RTL() and LTR() methods switch between “right-to-left” and “left-to-right” mode. In order to use a different non-UTF-8 TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run “go build”. This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include Google Fonts and DejaVu Fonts. The draw2d package is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the contrib directory. Here are guidelines for making submissions. Your change should - be compatible with the MIT License - be properly documented - be formatted with go fmt - include an example in fpdf_test.go if appropriate - conform to the standards of golint and go vet, that is, golint . and go vet . should not generate any warnings - not diminish test coverage Pull requests are the preferred means of accepting your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package’s code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Bruno Michel has provided valuable assistance with the code. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image’s extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Dan Meyers added support for embedded JavaScript. David Fish added a generic alias-replacement function to enable, among other things, table of contents functionality. Andy Bakun identified and corrected a problem in which the internal catalogs were not sorted stably. Paul Montag added encoding and decoding functionality for templates, including images that are embedded in templates; this allows templates to be stored independently of gofpdf. Paul also added support for page boxes used in printing PDF documents. Wojciech Matusiak added supported for word spacing. Artem Korotkiy added support of UTF-8 fonts. Dave Barnes added support for imported objects and templates. Brigham Thompson added support for rounded rectangles. Joe Westcott added underline functionality and optimized image storage. Benoit KUGLER contributed support for rectangles with corners of unequal radius, modification times, and for file attachments and annotations. - Remove all legacy code page font support; use UTF-8 exclusively - Improve test coverage as reported by the coverage tool. Example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package broadcast provides pubsub of messages over channels. A provider has a Broadcaster into which it Submits messages and into which subscribers Register to pick up those messages. Example of a simple broadcaster sending numbers to two workers. Five messages are sent. The first worker prints all five. The second worker prints the first and then unsubscribes.

Package httpretty prints your HTTP requests pretty on your terminal screen. You can use this package both on the client-side and on the server-side. This package provides a better way to view HTTP traffic without httputil DumpRequest, DumpRequestOut, and DumpResponse heavy debugging functions. You can use the logger quickly to log requests you are opening. For example: If you pass nil to the logger.RoundTripper it is going to fallback to http.DefaultTransport. You can use the logger quickly to log requests on your server. For example: Note: server logs don't include response headers set by the server. Client logs don't include request headers set by the HTTP client.

Package getopt (v1) provides traditional getopt processing for implementing commands that use traditional command lines. The standard Go flag package cannot be used to write a program that parses flags the way ls or ssh does, for example. A new version of this package (v2) (whose package name is also getopt) is available as: Getopt supports functionality found in both the standard BSD getopt as well as (one of the many versions of) the GNU getopt_long. Being a Go package, this package makes common usage easy, but still enables more controlled usage if needed. Typical usage: If you don't want the program to exit on error, use getopt.Getopt: Support is provided for both short (-f) and long (--flag) options. A single option may have both a short and a long name. Each option may be a flag or a value. A value takes an argument. Declaring no long names causes this package to process arguments like the traditional BSD getopt. Short flags may be combined into a single parameter. For example, "-a -b -c" may also be expressed "-abc". Long flags must stand on their own "--alpha --beta" Values require an argument. For short options the argument may either be immediately following the short name or as the next argument. Only one short value may be combined with short flags in a single argument; the short value must be after all short flags. For example, if f is a flag and v is a value, then: For the long value option val: Values with an optional value only set the value if the value is part of the same argument. In any event, the option count is increased and the option is marked as seen. There is no convience function defined for making the value optional. The SetOptional method must be called on the actual Option. Parsing continues until the first non-option or "--" is encountered. The short name "-" can be used, but it either is specified as "-" or as part of a group of options, for example "-f-". If there are no long options specified then "--f" could also be used. If "-" is not declared as an option then the single "-" will also terminate the option processing but unlike "--", the "-" will be part of the remaining arguments. Normally the parsing is performed by calling the Parse function. If it is important to see the order of the options then the Getopt function should be used. The standard Parse function does the equivalent of: When calling Getopt it is the responsibility of the caller to print any errors. Normally the default option set, CommandLine, is used. Other option sets may be created with New. After parsing, the sets Args will contain the non-option arguments. If an error is encountered then Args will begin with argument that caused the error. It is valid to call a set's Parse a second time to amend the current set of flags or values. As an example: If called with set to { "prog", "-a", "cmd", "-b", "arg" } then both and and b would be set, cmd would be set to "cmd", and opts.Args() would return { "arg" }. Unless an option type explicitly prohibits it, an option may appear more than once in the arguments. The last value provided to the option is the value. For each option type there are an unfortunately large number of ways, 8, to initialize the option. This number is derived from three attributes: The first two variations provide 4 signature: Foo can actually be expressed in terms of FooLong: Normally Foo is used, unless long options are needed. Setting short to 0 creates only a long option. The difference bentween Foo and FooVar is that you pass a pointer, p, to the location of the value to FooVar. The default value is simply *p. The initial value of *p is the defaut value of the option. Foo is actually a wrapper around FooVar: The third variation provides a top-level function and a method on a Set: The top-level function is simply: To simplfy documentation, typically only the main top-level function is fully documented. The others will have documentation when there is something special about them. All non-flag options are created with a "valuehelp" as the last parameter. Valuehelp should be 0, 1, or 2 strings. The first string, if provided, is the usage message for the option. If the second string, if provided, is the name to use for the value when displaying the usage. If not provided the term "value" is assumed. The usage message for the option created with is is

Package cmds helps building both standalone and client-server applications. The basic building blocks are requests, commands, emitters and responses. A command consists of a description of the parameters and a function. The function is passed the request as well as an emitter as arguments. It does operations on the inputs and sends the results to the user by emitting them. There are a number of emitters in this package and subpackages, but the user is free to create their own. A command is a struct containing the commands help text, a description of the arguments and options, the command's processing function and a type to let the caller know what type will be emitted. Optionally one of the functions PostRun and Encoder may be defined that consumes the function's emitted values and generates a visual representation for e.g. the terminal. Encoders work on a value-by-value basis, while PostRun operates on the value stream. An emitter has the Emit method, that takes the command's function's output as an argument and passes it to the user. The command's function does not know what kind of emitter it works with, so the same function may run locally or on a server, using an rpc interface. Emitters can also send errors using the SetError method. The user-facing emitter usually is the cli emitter. Values emitter here will be printed to the terminal using either the Encoders or the PostRun function. A response is a value that the user can read emitted values from. Responses have a method Next() that returns the next emitted value and an error value. If the last element has been received, the returned error value is io.EOF. If the application code has sent an error using SetError, the error ErrRcvdError is returned on next, indicating that the caller should call Error(). Depending on the reponse type, other errors may also occur. Pipes are pairs (emitter, response), such that a value emitted on the emitter can be received in the response value. Most builtin emitters are "pipe" emitters. The most prominent examples are the channel pipe and the http pipe. The channel pipe is backed by a channel. The only error value returned by the response is io.EOF, which happens when the channel is closed. The http pipe is backed by an http connection. The response can also return other errors, e.g. if there are errors on the network. To get a better idea of what's going on, take a look at the examples at https://github.com/ipfs/go-ipfs-cmds/tree/master/examples.

Goversion scans a directory tree and, for every executable it finds, prints the Go version used to build that executable. Usage: The list of paths can be individual files or directories; if the latter, goversion scans all files in the directory tree, not following symlinks. Goversion scans inside of tar or gzipped tar archives that it finds (named *.tar, *.tar.gz, or *.tgz), but not recursively. The -crypto flag causes goversion to print additional information about the crypto libraries linked into each executable. The -m flag causes goversion to print the list of modules found in the executable, along with version information. The -mh flag causes goversion to print the list of modules found in the executable, along with version and hash information. The -v flag causes goversion to print information about every file it considers. Scan /usr/bin for Go binaries and print their versions:

Package template implements data-driven templates for generating textual output. To generate HTML output, see package html/template, which has the same interface as this package but automatically secures HTML output against certain attacks. Templates are executed by applying them to a data structure. Annotations in the template refer to elements of the data structure (typically a field of a struct or a key in a map) to control execution and derive values to be displayed. Execution of the template walks the structure and sets the cursor, represented by a period '.' and called "dot", to the value at the current location in the structure as execution proceeds. The input text for a template is UTF-8-encoded text in any format. "Actions"--data evaluations or control structures--are delimited by "{{" and "}}"; all text outside actions is copied to the output unchanged. Actions may not span newlines, although comments can. Once parsed, a template may be executed safely in parallel. Here is a trivial example that prints "17 items are made of wool". More intricate examples appear below. Here is the list of actions. "Arguments" and "pipelines" are evaluations of data, defined in detail below. An argument is a simple value, denoted by one of the following. Arguments may evaluate to any type; if they are pointers the implementation automatically indirects to the base type when required. If an evaluation yields a function value, such as a function-valued field of a struct, the function is not invoked automatically, but it can be used as a truth value for an if action and the like. To invoke it, use the call function, defined below. A pipeline is a possibly chained sequence of "commands". A command is a simple value (argument) or a function or method call, possibly with multiple arguments: A pipeline may be "chained" by separating a sequence of commands with pipeline characters '|'. In a chained pipeline, the result of the each command is passed as the last argument of the following command. The output of the final command in the pipeline is the value of the pipeline. The output of a command will be either one value or two values, the second of which has type error. If that second value is present and evaluates to non-nil, execution terminates and the error is returned to the caller of Execute. A pipeline inside an action may initialize a variable to capture the result. The initialization has syntax where $variable is the name of the variable. An action that declares a variable produces no output. If a "range" action initializes a variable, the variable is set to the successive elements of the iteration. Also, a "range" may declare two variables, separated by a comma: in which case $index and $element are set to the successive values of the array/slice index or map key and element, respectively. Note that if there is only one variable, it is assigned the element; this is opposite to the convention in Go range clauses. A variable's scope extends to the "end" action of the control structure ("if", "with", or "range") in which it is declared, or to the end of the template if there is no such control structure. A template invocation does not inherit variables from the point of its invocation. When execution begins, $ is set to the data argument passed to Execute, that is, to the starting value of dot. Here are some example one-line templates demonstrating pipelines and variables. All produce the quoted word "output": During execution functions are found in two function maps: first in the template, then in the global function map. By default, no functions are defined in the template but the Funcs method can be used to add them. Predefined global functions are named as follows. The boolean functions take any zero value to be false and a non-zero value to be true. There is also a set of binary comparison operators defined as functions: For simpler multi-way equality tests, eq (only) accepts two or more arguments and compares the second and subsequent to the first, returning in effect (Unlike with || in Go, however, eq is a function call and all the arguments will be evaluated.) The comparison functions work on basic types only (or named basic types, such as "type Celsius float32"). They implement the Go rules for comparison of values, except that size and exact type are ignored, so any integer value, signed or unsigned, may be compared with any other integer value. (The arithmetic value is compared, not the bit pattern, so all negative integers are less than all unsigned integers.) However, as usual, one may not compare an int with a float32 and so on. Each template is named by a string specified when it is created. Also, each template is associated with zero or more other templates that it may invoke by name; such associations are transitive and form a name space of templates. A template may use a template invocation to instantiate another associated template; see the explanation of the "template" action above. The name must be that of a template associated with the template that contains the invocation. When parsing a template, another template may be defined and associated with the template being parsed. Template definitions must appear at the top level of the template, much like global variables in a Go program. The syntax of such definitions is to surround each template declaration with a "define" and "end" action. The define action names the template being created by providing a string constant. Here is a simple example: This defines two templates, T1 and T2, and a third T3 that invokes the other two when it is executed. Finally it invokes T3. If executed this template will produce the text By construction, a template may reside in only one association. If it's necessary to have a template addressable from multiple associations, the template definition must be parsed multiple times to create distinct *Template values, or must be copied with the Clone or AddParseTree method. Parse may be called multiple times to assemble the various associated templates; see the ParseFiles and ParseGlob functions and methods for simple ways to parse related templates stored in files. A template may be executed directly or through ExecuteTemplate, which executes an associated template identified by name. To invoke our example above, we might write, or to invoke a particular template explicitly by name,

Package fpdf implements a PDF document generator with high level support for text, drawing and images. - UTF-8 support - Choice of measurement unit, page format and margins - Page header and footer management - Automatic page breaks, line breaks, and text justification - Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images - Colors, gradients and alpha channel transparency - Outline bookmarks - Internal and external links - TrueType, Type1 and encoding support - Page compression - Lines, Bézier curves, arcs, and ellipses - Rotation, scaling, skewing, translation, and mirroring - Clipping - Document protection - Layers - Templates - Barcodes - Charting facility - Import PDFs as templates go-pdf/fpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. go-pdf/fpdf supports UTF-8 TrueType fonts and “right-to-left” languages. Note that Chinese, Japanese, and Korean characters may not be included in many general purpose fonts. For these languages, a specialized font (for example, NotoSansSC for simplified Chinese) can be used. Also, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running go test ./... is the production of a number of example PDFs. These can be found in the go-pdf/fpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you’ll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the go-pdf/fpdf/pdf/reference directory and if the third argument to ComparePDFFiles() in internal/example/example.go is true. (By default it is false.) The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). You should use AddUTF8Font() or AddUTF8FontFromBytes() to add a TrueType UTF-8 encoded font. Use RTL() and LTR() methods switch between “right-to-left” and “left-to-right” mode. In order to use a different non-UTF-8 TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run “go build”. This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include Google Fonts and DejaVu Fonts. The draw2d package is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the contrib directory. Here are guidelines for making submissions. Your change should - be compatible with the MIT License - be properly documented - be formatted with go fmt - include an example in fpdf_test.go if appropriate - conform to the standards of golint and go vet, that is, golint . and go vet . should not generate any warnings - not diminish test coverage Pull requests are the preferred means of accepting your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package’s code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Bruno Michel has provided valuable assistance with the code. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image’s extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Dan Meyers added support for embedded JavaScript. David Fish added a generic alias-replacement function to enable, among other things, table of contents functionality. Andy Bakun identified and corrected a problem in which the internal catalogs were not sorted stably. Paul Montag added encoding and decoding functionality for templates, including images that are embedded in templates; this allows templates to be stored independently of gofpdf. Paul also added support for page boxes used in printing PDF documents. Wojciech Matusiak added supported for word spacing. Artem Korotkiy added support of UTF-8 fonts. Dave Barnes added support for imported objects and templates. Brigham Thompson added support for rounded rectangles. Joe Westcott added underline functionality and optimized image storage. Benoit KUGLER contributed support for rectangles with corners of unequal radius, modification times, and for file attachments and annotations. - Remove all legacy code page font support; use UTF-8 exclusively - Improve test coverage as reported by the coverage tool. Example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.SummaryCompare() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package goipp implements IPP core protocol, as defined by RFC 8010 It doesn't implement high-level operations, such as "print a document", "cancel print job" and so on. It's scope is limited to proper generation and parsing of IPP requests and responses. Request and response both has a similar format, represented here by type Message, with the only difference, that Code field of that Message is the Operation code in request and Status code in response. So most of operations are common for request and response messages

Package wmi provides a WQL interface for WMI on Windows. Example code to print names of running processes:

Go-ReJSON is a Go client for ReJSON redis module (https://github.com/RedisLabsModules/rejson) Go-ReJSON implements all the features of ReJSON Module, without any dependency on the client used for Redis in GoLang. Enjoy ReJSON with the type-safe Redis client, Go-Redis/Redis (https://github.com/go-redis/redis) or use the print-like Redis-api client GoModule/Redigo (https://github.com/gomodule/redigo/redis). Go-ReJSON supports both the clients. Use any of the above two client you want, Go-ReJSON helps you out with all its features and functionalities in a more generic and standard way. To install and use ReJSON module, one must have the pre-requisites installed and setup. Run the script in : Create New ReJSON Handler Set Redigo Client and use ReJSON in it Similarly, one can set client for Go-Redis And now, one can directly use ReJSON commands using the handler

Package jp offers a highly performant json selector in the style of the jq command line Usage of this package involves the concept of an Op. An Op is a transformation that converts a []byte into a []byte. To get started, use the Parse function to obtain an Op. This will create an Op that will accept a JSON object in []byte format and return the value associated with "key." For example: Will print the string "value". The goal is to support all the select operations supported by jq's command line namesake.

Package ensure provides utilities for testing to ensure the given conditions are met and Fatal if they aren't satisified. The various functions here show a useful error message automatically including identifying source location. They additionally support arbitary arguments which will be printed using the spew library.

Package merry provides enriched golang errors, with stacktraces merry creates errors with stacktraces, and can augment those errors with additional information. When you create a new merry error, or wrap an existing error in a merry error, merry attaches a stacktrace to the error: err has a stacktrace attached. Alternately, you can wrap existing errors. merry will attach a stacktrace at the point of wrapping: Capturing the stack can be globally disabled with `SetStackCaptureEnabled(false)`. Wrapping is idempotent: Wrap will only attach a stacktrace if the error doesn't already have one. Wrap() is the simplest way to attach a stacktrace to an error, but other functions can be used instead, with both add a stacktrace, and augment or modify the error. For example, Prepend() modifies the error's message (and also attaches a stacktrace): See the other package functions for other ways to augment or modify errors, such as Append, WithUserMessage, WithHTTPCode, WithValue, etc. These functions all return a merry.Error interface, which has methods which mirror the package level functions, to allow simple chaining: Wrap will not take a new stacktrace if an error already has one attached. Here will create a new error which replaces the stacktrace with a new one: The go idiom of exporting package-level error variables for comparison to errors returned by the package is broken by merry. For example: If the error returned was a merry error, the equality comparison would always fail, because merry augments errors by wrapping them in layers. To compensate for this, merry has the Is() function. Is() will unwrap the err and compare each layer to the second argument. You can add a cause to an error: Cause(error) will return the cause of the argument. RootCause(error) returns the innermost cause. Is(err1, err2) is cause aware, and will return true if err2 is a cause (anywhere in the causal change) of err1. To obtain an error's stacktrace, call Stack(). To get other information about the site of the error, or print the error's stacktrace, see Location(), SourceLine(), Stacktrace(), and Details(). merry errors also implement the fmt.Formatter interface. errors support the following fmt flags:

Package qml offers graphical QML application support for the Go language. This package is in an alpha stage, and still in heavy development. APIs may change, and things may break. At this time contributors and developers that are interested in tracking the development closely are encouraged to use it. If you'd prefer a more stable release, please hold on a bit and subscribe to the mailing list for news. It's in a pretty good state, so it shall not take too long. See http://github.com/go-qml/qml for details. The qml package enables Go programs to display and manipulate graphical content using Qt's QML framework. QML uses a declarative language to express structure and style, and supports JavaScript for in-place manipulation of the described content. When using the Go qml package, such QML content can also interact with Go values, making use of its exported fields and methods, and even explicitly creating new instances of registered Go types. A simple Go application that integrates with QML may perform the following steps for offering a graphical interface: Some of these topics are covered below, and may also be observed in practice in the following examples: The following logic demonstrates loading a QML file into a window: Any QML object may be manipulated by Go via the Object interface. That interface is implemented both by dynamic QML values obtained from a running engine, and by Go types in the qml package that represent QML values, such as Window, Context, and Engine. For example, the following logic creates a window and prints its width whenever it's made visible: Information about the methods, properties, and signals that are available for QML objects may be obtained in the Qt documentation. As a reference, the "visibleChanged" signal and the "width" property used in the example above are described at: When in doubt about what type is being manipulated, the Object.TypeName method provides the type name of the underlying value. The simplest way of making a Go value available to QML code is setting it as a variable of the engine's root context, as in: This logic would enable the following QML code to successfully run: While registering an individual Go value as described above is a quick way to get started, it is also fairly limited. For more flexibility, a Go type may be registered so that QML code can natively create new instances in an arbitrary position of the structure. This may be achieved via the RegisterType function, as the following example demonstrates: With this logic in place, QML code can create new instances of Person by itself: Independently from the mechanism used to publish a Go value to QML code, its methods and fields are available to QML logic as methods and properties of the respective QML object representing it. As required by QML, though, the Go method and field names are lowercased according to the following scheme when being accesed from QML: While QML code can directly read and write exported fields of Go values, as described above, a Go type can also intercept writes to specific fields by declaring a setter method according to common Go conventions. This is often useful for updating the internal state or the visible content of a Go-defined type. For example: In the example above, whenever QML code attempts to update the Person.Name field via any means (direct assignment, object declarations, etc) the SetName method is invoked with the provided value instead. A setter method may also be used in conjunction with a getter method rather than a real type field. A method is only considered a getter in the presence of the respective setter, and according to common Go conventions it must not have the Get prefix. Inside QML logic, the getter and setter pair is seen as a single object property. Custom types implemented in Go may have displayable content by defining a Paint method such as: A simple example is available at: Resource files (qml code, images, etc) may be packed into the Go qml application binary to simplify its handling and distribution. This is done with the genqrc tool: The following blog post provides more details:

This is the official Go SDK for Oracle Cloud Infrastructure Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#installing for installation instructions. Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring for configuration instructions. The following example shows how to get started with the SDK. The example belows creates an identityClient struct with the default configuration. It then utilizes the identityClient to list availability domains and prints them out to stdout More examples can be found in the SDK Github repo: https://github.com/oracle/oci-go-sdk/tree/master/example Optional fields are represented with the `mandatory:"false"` tag on input structs. The SDK will omit all optional fields that are nil when making requests. In the case of enum-type fields, the SDK will omit fields whose value is an empty string. The SDK uses pointers for primitive types in many input structs. To aid in the construction of such structs, the SDK provides functions that return a pointer for a given value. For example: The SDK exposes functionality that allows the user to customize any http request before is sent to the service. You can do so by setting the `Interceptor` field in any of the `Client` structs. For example: The Interceptor closure gets called before the signing process, thus any changes done to the request will be properly signed and submitted to the service. The SDK exposes a stand-alone signer that can be used to signing custom requests. Related code can be found here: https://github.com/oracle/oci-go-sdk/blob/master/common/http_signer.go. The example below shows how to create a default signer. The signer also allows more granular control on the headers used for signing. For example: You can combine a custom signer with the exposed clients in the SDK. This allows you to add custom signed headers to the request. Following is an example: Bear in mind that some services have a white list of headers that it expects to be signed. Therefore, adding an arbitrary header can result in authentications errors. To see a runnable example, see https://github.com/oracle/oci-go-sdk/blob/master/example/example_identity_test.go For more information on the signing algorithm refer to: https://docs.cloud.oracle.com/Content/API/Concepts/signingrequests.htm Some operations accept or return polymorphic JSON objects. The SDK models such objects as interfaces. Further the SDK provides structs that implement such interfaces. Thus, for all operations that expect interfaces as input, pass the struct in the SDK that satisfies such interface. For example: In the case of a polymorphic response you can type assert the interface to the expected type. For example: An example of polymorphic JSON request handling can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_test.go#L63 When calling a list operation, the operation will retrieve a page of results. To retrieve more data, call the list operation again, passing in the value of the most recent response's OpcNextPage as the value of Page in the next list operation call. When there is no more data the OpcNextPage field will be nil. An example of pagination using this logic can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_pagination_test.go The SDK has a built-in logging mechanism used internally. The internal logging logic is used to record the raw http requests, responses and potential errors when (un)marshalling request and responses. Built-in logging in the SDK is controlled via the environment variable "OCI_GO_SDK_DEBUG" and its contents. The below are possible values for the "OCI_GO_SDK_DEBUG" variable 1. "info" or "i" enables all info logging messages 2. "debug" or "d" enables all debug and info logging messages 3. "verbose" or "v" or "1" enables all verbose, debug and info logging messages 4. "null" turns all logging messages off. If the value of the environment variable does not match any of the above then default logging level is "info". If the environment variable is not present then no logging messages are emitted. The default destination for logging is Stderr and if you want to output log to a file you can set via environment variable "OCI_GO_SDK_LOG_OUTPUT_MODE". The below are possible values 1. "file" or "f" enables all logging output saved to file 2. "combine" or "c" enables all logging output to both stderr and file You can also customize the log file location and name via "OCI_GO_SDK_LOG_FILE" environment variable, the value should be the path to a specific file If this environment variable is not present, the default location will be the project root path Sometimes you may need to wait until an attribute of a resource, such as an instance or a VCN, reaches a certain state. An example of this would be launching an instance and then waiting for the instance to become available, or waiting until a subnet in a VCN has been terminated. You might also want to retry the same operation again if there's network issue etc... This can be accomplished by using the RequestMetadata.RetryPolicy(request level configuration), alternatively, global(all services) or client level RetryPolicy configration is also possible. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_retry_test.go If you are trying to make a PUT/POST API call with binary request body, please make sure the binary request body is resettable, which means the request body should inherit Seeker interface. The Retry behavior Precedence (Highest to lowest) is defined as below:- The OCI Go SDK defines a default retry policy that retries on the errors suitable for retries (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm), for a recommended period of time (up to 7 attempts spread out over at most approximately 1.5 minutes). The default retry policy is defined by : Default Retry-able Errors Below is the list of default retry-able errors for which retry attempts should be made. The following errors should be retried (with backoff). HTTP Code Customer-facing Error Code Apart from the above errors, retries should also be attempted in the following Client Side errors : 1. HTTP Connection timeout 2. Request Connection Errors 3. Request Exceptions 4. Other timeouts (like Read Timeout) The above errors can be avoided through retrying and hence, are classified as the default retry-able errors. Additionally, retries should also be made for Circuit Breaker exceptions (Exceptions raised by Circuit Breaker in an open state) Default Termination Strategy The termination strategy defines when SDKs should stop attempting to retry. In other words, it's the deadline for retries. The OCI SDKs should stop retrying the operation after 7 retry attempts. This means the SDKs will have retried for ~98 seconds or ~1.5 minutes have elapsed due to total delays. SDKs will make a total of 8 attempts. (1 initial request + 7 retries) Default Delay Strategy Default Delay Strategy - The delay strategy defines the amount of time to wait between each of the retry attempts. The default delay strategy chosen for the SDK – Exponential backoff with jitter, using: 1. The base time to use in retry calculations will be 1 second 2. An exponent of 2. When calculating the next retry time, the SDK will raise this to the power of the number of attempts 3. A maximum wait time between calls of 30 seconds (Capped) 4. Added jitter value between 0-1000 milliseconds to spread out the requests Configure and use default retry policy You can set this retry policy for a single request: or for all requests made by a client: or for all requests made by all clients: or setting default retry via environment varaible, which is a global switch for all services: Some services enable retry for operations by default, this can be overridden using any alternatives mentioned above. To know which service operations have retries enabled by default, look at the operation's description in the SDK - it will say whether that it has retries enabled by default Some resources may have to be replicated across regions and are only eventually consistent. That means the request to create, update, or delete the resource succeeded, but the resource is not available everywhere immediately. Creating, updating, or deleting any resource in the Identity service is affected by eventual consistency, and doing so may cause other operations in other services to fail until the Identity resource has been replicated. For example, the request to CreateTag in the Identity service in the home region succeeds, but immediately using that created tag in another region in a request to LaunchInstance in the Compute service may fail. If you are creating, updating, or deleting resources in the Identity service, we recommend using an eventually consistent retry policy for any service you access. The default retry policy already deals with eventual consistency. Example: This retry policy will use a different strategy if an eventually consistent change was made in the recent past (called the "eventually consistent window", currently defined to be 4 minutes after the eventually consistent change). This special retry policy for eventual consistency will: 1. make up to 9 attempts (including the initial attempt); if an attempt is successful, no more attempts will be made 2. retry at most until (a) approximately the end of the eventually consistent window or (b) the end of the default retry period of about 1.5 minutes, whichever is farther in the future; if an attempt is successful, no more attempts will be made, and the OCI Go SDK will not wait any longer 3. retry on the error codes 400-RelatedResourceNotAuthorizedOrNotFound, 404-NotAuthorizedOrNotFound, and 409-NotAuthorizedOrResourceAlreadyExists, for which the default retry policy does not retry, in addition to the errors the default retry policy retries on (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm) If there were no eventually consistent actions within the recent past, then this special retry strategy is not used. If you want a retry policy that does not handle eventual consistency in a special way, for example because you retry on all error responses, you can use DefaultRetryPolicyWithoutEventualConsistency or NewRetryPolicyWithOptions with the common.ReplaceWithValuesFromRetryPolicy(common.DefaultRetryPolicyWithoutEventualConsistency()) option: The NewRetryPolicy function also creates a retry policy without eventual consistency. Circuit Breaker can prevent an application repeatedly trying to execute an operation that is likely to fail, allowing it to continue without waiting for the fault to be rectified or wasting CPU cycles, of course, it also enables an application to detect whether the fault has been resolved. If the problem appears to have been rectified, the application can attempt to invoke the operation. Go SDK intergrates sony/gobreaker solution, wraps in a circuit breaker object, which monitors for failures. Once the failures reach a certain threshold, the circuit breaker trips, and all further calls to the circuit breaker return with an error, this also saves the service from being overwhelmed with network calls in case of an outage. Circuit Breaker Configuration Definitions 1. Failure Rate Threshold - The state of the CircuitBreaker changes from CLOSED to OPEN when the failure rate is equal or greater than a configurable threshold. For example when more than 50% of the recorded calls have failed. 2. Reset Timeout - The timeout after which an open circuit breaker will attempt a request if a request is made 3. Failure Exceptions - The list of Exceptions that will be regarded as failures for the circuit. 4. Minimum number of calls/ Volume threshold - Configures the minimum number of calls which are required (per sliding window period) before the CircuitBreaker can calculate the error rate. 1. Failure Rate Threshold - 80% - This means when 80% of the requests calculated for a time window of 120 seconds have failed then the circuit will transition from closed to open. 2. Minimum number of calls/ Volume threshold - A value of 10, for the above defined time window of 120 seconds. 3. Reset Timeout - 30 seconds to wait before setting the breaker to halfOpen state, and trying the action again. 4. Failure Exceptions - The failures for the circuit will only be recorded for the retryable/transient exceptions. This means only the following exceptions will be regarded as failure for the circuit. HTTP Code Customer-facing Error Code Apart from the above, the following client side exceptions will also be treated as a failure for the circuit : 1. HTTP Connection timeout 2. Request Connection Errors 3. Request Exceptions 4. Other timeouts (like Read Timeout) Go SDK enable circuit breaker with default configuration for most of the service clients, if you don't want to enable the solution, can disable the functionality before your application running Go SDK also supports customize Circuit Breaker with specified configurations. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_circuitbreaker_test.go To know which service clients have circuit breakers enabled, look at the service client's description in the SDK - it will say whether that it has circuit breakers enabled by default The GO SDK uses the net/http package to make calls to OCI services. If your environment requires you to use a proxy server for outgoing HTTP requests then you can set this up in the following ways: 1. Configuring environment variable as described here https://golang.org/pkg/net/http/#ProxyFromEnvironment 2. Modifying the underlying Transport struct for a service client In order to modify the underlying Transport struct in HttpClient, you can do something similar to (sample code for audit service client): The Object Storage service supports multipart uploads to make large object uploads easier by splitting the large object into parts. The Go SDK supports raw multipart upload operations for advanced use cases, as well as a higher level upload class that uses the multipart upload APIs. For links to the APIs used for multipart upload operations, see Managing Multipart Uploads (https://docs.cloud.oracle.com/iaas/Content/Object/Tasks/usingmultipartuploads.htm). Higher level multipart uploads are implemented using the UploadManager, which will: split a large object into parts for you, upload the parts in parallel, and then recombine and commit the parts as a single object in storage. This code sample shows how to use the UploadManager to automatically split an object into parts for upload to simplify interaction with the Object Storage service: https://github.com/oracle/oci-go-sdk/blob/master/example/example_objectstorage_test.go Some response fields are enum-typed. In the future, individual services may return values not covered by existing enums for that field. To address this possibility, every enum-type response field is a modeled as a type that supports any string. Thus if a service returns a value that is not recognized by your version of the SDK, then the response field will be set to this value. When individual services return a polymorphic JSON response not available as a concrete struct, the SDK will return an implementation that only satisfies the interface modeling the polymorphic JSON response. If you are using a version of the SDK released prior to the announcement of a new region, you may need to use a workaround to reach it, depending on whether the region is in the oraclecloud.com realm. A region is a localized geographic area. For more information on regions and how to identify them, see Regions and Availability Domains(https://docs.cloud.oracle.com/iaas/Content/General/Concepts/regions.htm). A realm is a set of regions that share entities. You can identify your realm by looking at the domain name at the end of the network address. For example, the realm for xyz.abc.123.oraclecloud.com is oraclecloud.com. oraclecloud.com Realm: For regions in the oraclecloud.com realm, even if common.Region does not contain the new region, the forward compatibility of the SDK can automatically handle it. You can pass new region names just as you would pass ones that are already defined. For more information on passing region names in the configuration, see Configuring (https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring). For details on common.Region, see (https://github.com/oracle/oci-go-sdk/blob/master/common/common.go). Other Realms: For regions in realms other than oraclecloud.com, you can use the following workarounds to reach new regions with earlier versions of the SDK. NOTE: Be sure to supply the appropriate endpoints for your region. You can overwrite the target host with client.Host: If you are authenticating via instance principals, you can set the authentication endpoint in an environment variable: Got a fix for a bug, or a new feature you'd like to contribute? The SDK is open source and accepting pull requests on GitHub https://github.com/oracle/oci-go-sdk Licensing information available at: https://github.com/oracle/oci-go-sdk/blob/master/LICENSE.txt To be notified when a new version of the Go SDK is released, subscribe to the following feed: https://github.com/oracle/oci-go-sdk/releases.atom Please refer to this link: https://github.com/oracle/oci-go-sdk#help

Package merry adds context to errors, including automatic stack capture, cause chains, HTTP status code, user messages, and arbitrary values. Wrapped errors work a lot like google's golang.org/x/net/context package: each wrapper error contains the inner error, a key, and a value. Like contexts, errors are immutable: adding a key/value to an error always creates a new error which wraps the original. This package comes with built-in support for adding information to errors: * stacktraces * changing the error message * HTTP status codes * End user error messages * causes You can also add your own additional information. The stack capturing feature can be turned off for better performance, though it's pretty fast. Benchmarks on an 2017 MacBook Pro, with go 1.10: This package contains functions for creating errors, or wrapping existing errors. To create: Additional context information can be attached to errors using functional options, called Wrappers: Errorf() also accepts wrappers, mixed in with the format args: Wrappers can be applied to existing errors with Wrap(): Wrap() will add a stacktrace to any error which doesn't already have one attached. WrapSkipping() can be used to control where the stacktrace starts. This package contains wrappers for adding specific context information to errors, such as an HTTPCode. You can create your own wrappers using the primitive Value(), WithValue(), and Set() functions. Errors produced by this package implement fmt.Formatter, to print additional information about the error: Details() prints the error message, all causes, the stacktrace, and additional error values configured with RegisterDetailFunc(). By default, it will show the HTTP status code and user message. By default, any error created by or wrapped by this package will automatically have a stacktrace captured and attached to the error. This capture only happens if the error doesn't already have a stack attached to it, so wrapping the error with additional context won't capture additional stacks. When and how stacks are captured can be customized. SetMaxStackDepth() can globally configure how many frames to capture. SetStackCaptureEnabled() can globally configure whether stacks are captured by default. Wrap(err, NoStackCapture()) can be used to selectively suppress stack capture for a particular error. Wrap(err, CaptureStack(false)) will capture a new stack at the Wrap call site, even if the err already had an earlier stack attached. The new stack overrides the older stack. Wrap(err, CaptureStack(true)) will force a stack capture at the call site even if stack capture is disabled globally. Finally, Wrappers are passed a depth argument so they know how deep they are in the call stack from the call site where this package's API was called. This allows Wrappers to implement their own stack capturing logic. The package contains functions for creating new errors with stacks, or adding a stack to `error` instances. Functions with add context (e.g. `WithValue()`) work on any `error`, and will automatically convert them to merry errors (with a stack) if necessary. AddHooks() can install wrappers which are applied to all errors processed by this package. Hooks are applied before any other wrappers or processing takes place. They can be used to integrate with errors from other packages, normalizing errors (such as applying standard status codes to application errors), localizing user messages, or replacing the stack capturing mechanism.

Package stream provides filters that can be chained together in a manner similar to Unix pipelines. A simple example that prints all go files under the current directory: stream.Run is passed a list of filters that are chained together (stream.Find, stream.Grep, stream.WriteLines are filters). Each filter takes as input a sequence of strings and produces a sequence of strings. The empty sequence is passed as input to the first filter. The output of one filter is fed as input to the next filter. stream.Run is just one way to execute filters. Others are stream.Contents (returns the output of the last filter as a []string), and stream.ForEach (executes a supplied function for every output item). Filter execution can result in errors. These are returned from stream functions normally. For example, the following call will return a non-nil error. Each filter takes as input a sequence of strings (read from a channel) and produces as output a sequence of strings (written to a channel). The stream package provides a bunch of useful filters. Applications can define their own filters easily. For example, here is a filter that repeats every input n times: The output will be: Note that Repeat returns a FilterFunc, a function type that implements the Filter interface. This is a common implementation pattern: many simple filters can be expressed as a single function of type FilterFunc. FilterFunc is an appropriate type to use for most filters like Repeat above. However for some filters, dynamic customization is appropriate. Such filters provide their own implementation of the Filter interface with extra methods. For example, stream.Sort provides extra methods that can be used to control how items are sorted: The interface of this package is inspired by the http://labix.org/pipe package. Users may wish to consider that package in case it fits their needs better.

Package errors provides simple error handling primitives. The traditional error handling idiom in Go is roughly akin to which applied recursively up the call stack results in error reports without context or debugging information. The errors package allows programmers to add context to the failure path in their code in a way that does not destroy the original value of the error. The errors.Annotate function returns a new error that adds context to the original error by recording a stack trace at the point Annotate is called, and the supplied message. For example If additional control is required the errors.AddStack and errors.WithMessage functions destructure errors.Annotate into its component operations of annotating an error with a stack trace and an a message, respectively. Using errors.Annotate constructs a stack of errors, adding context to the preceding error. Depending on the nature of the error it may be necessary to reverse the operation of errors.Annotate to retrieve the original error for inspection. Any error value which implements this interface can be inspected by errors.Cause. errors.Cause will recursively retrieve the topmost error which does not implement causer, which is assumed to be the original cause. For example: causer interface is not exported by this package, but is considered a part of stable public API. errors.Unwrap is also available: this will retrieve the next error in the chain. All error values returned from this package implement fmt.Formatter and can be formatted by the fmt package. The following verbs are supported New, Errorf, Annotate, and Annotatef record a stack trace at the point they are invoked. This information can be retrieved with the StackTracer interface that returns a StackTrace. Where errors.StackTrace is defined as The Frame type represents a call site in the stack trace. Frame supports the fmt.Formatter interface that can be used for printing information about the stack trace of this error. For example: See the documentation for Frame.Format for more details. errors.Find can be used to search for an error in the error chain.

Package getopt (v2) provides traditional getopt processing for implementing commands that use traditional command lines. The standard Go flag package cannot be used to write a program that parses flags the way ls or ssh does, for example. Version 2 of this package has a simplified API. See the github.com/pborman/options package for a simple structure based interface to this package. Getopt supports functionality found in both the standard BSD getopt as well as (one of the many versions of) the GNU getopt_long. Being a Go package, this package makes common usage easy, but still enables more controlled usage if needed. Typical usage: If you don't want the program to exit on error, use getopt.Getopt: Support is provided for both short (-f) and long (--flag) options. A single option may have both a short and a long name. Each option may be a flag or a value. A value takes an argument. Declaring no long names causes this package to process arguments like the traditional BSD getopt. Short flags may be combined into a single parameter. For example, "-a -b -c" may also be expressed "-abc". Long flags must stand on their own "--alpha --beta" Values require an argument. For short options the argument may either be immediately following the short name or as the next argument. Only one short value may be combined with short flags in a single argument; the short value must be after all short flags. For example, if f is a flag and v is a value, then: For the long value option val: Values with an optional value only set the value if the value is part of the same argument. In any event, the option count is increased and the option is marked as seen. There is no convenience function defined for making the value optional. The SetOptional method must be called on the actual Option. Parsing continues until the first non-option or "--" is encountered. The short name "-" can be used, but it either is specified as "-" or as part of a group of options, for example "-f-". If there are no long options specified then "--f" could also be used. If "-" is not declared as an option then the single "-" will also terminate the option processing but unlike "--", the "-" will be part of the remaining arguments. Normally the parsing is performed by calling the Parse function. If it is important to see the order of the options then the Getopt function should be used. The standard Parse function does the equivalent of: When calling Getopt it is the responsibility of the caller to print any errors. Normally the default option set, CommandLine, is used. Other option sets may be created with New. After parsing, the sets Args will contain the non-option arguments. If an error is encountered then Args will begin with argument that caused the error. It is valid to call a set's Parse a second time to amen flags or values. As an example: If called with set to { "prog", "-a", "cmd", "-b", "arg" } then both and and b would be set, cmd would be set to "cmd", and opts.Args() would return { "arg" }. Unless an option type explicitly prohibits it, an option may appear more than once in the arguments. The last value provided to the option is the value. An option marked as mandatory and not seen when parsing will cause an error to be reported such as: "program: --name is a mandatory option". An option is marked mandatory by using the Mandatory method: Mandatory options have (required) appended to their help message: Options can be marked as part of a mutually exclusive group. When two or more options in a mutually exclusive group are both seen while parsing then an error such as "program: options -a and -b are mutually exclusive" will be reported. Mutually exclusive groups are declared using the SetGroup method: A set can have multiple mutually exclusive groups. Mutually exclusive groups are identified with their group name in {}'s appeneded to their help message: The Flag and FlagLong functions support most standard Go types. For the list, see the description of FlagLong below for a list of supported types. There are also helper routines to allow single line flag declarations. These types are: Bool, Counter, Duration, Enum, Int16, Int32, Int64, Int, List, Signed, String, Uint16, Uint32, Uint64, Uint, and Unsigned. Each comes in a short and long flavor, e.g., Bool and BoolLong and include functions to set the flags on the standard command line or for a specific Set of flags. Except for the Counter, Enum, Signed and Unsigned types, all of these types can be declared using Flag and FlagLong by passing in a pointer to the appropriate type. A pointer to any type that implements the Value interface may be passed to Flag or FlagLong. All non-flag options are created with a "valuehelp" as the last parameter. Valuehelp should be 0, 1, or 2 strings. The first string, if provided, is the usage message for the option. If the second string, if provided, is the name to use for the value when displaying the usage. If not provided the term "value" is assumed. The usage message for the option created with is is

This is the official Go SDK for Oracle Cloud Infrastructure Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#installing for installation instructions. Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring for configuration instructions. The following example shows how to get started with the SDK. The example belows creates an identityClient struct with the default configuration. It then utilizes the identityClient to list availability domains and prints them out to stdout More examples can be found in the SDK Github repo: https://github.com/oracle/oci-go-sdk/tree/master/example Optional fields are represented with the `mandatory:"false"` tag on input structs. The SDK will omit all optional fields that are nil when making requests. In the case of enum-type fields, the SDK will omit fields whose value is an empty string. The SDK uses pointers for primitive types in many input structs. To aid in the construction of such structs, the SDK provides functions that return a pointer for a given value. For example: The SDK exposes functionality that allows the user to customize any http request before is sent to the service. You can do so by setting the `Interceptor` field in any of the `Client` structs. For example: The Interceptor closure gets called before the signing process, thus any changes done to the request will be properly signed and submitted to the service. The SDK exposes a stand-alone signer that can be used to signing custom requests. Related code can be found here: https://github.com/oracle/oci-go-sdk/blob/master/common/http_signer.go. The example below shows how to create a default signer. The signer also allows more granular control on the headers used for signing. For example: You can combine a custom signer with the exposed clients in the SDK. This allows you to add custom signed headers to the request. Following is an example: Bear in mind that some services have a white list of headers that it expects to be signed. Therefore, adding an arbitrary header can result in authentications errors. To see a runnable example, see https://github.com/oracle/oci-go-sdk/blob/master/example/example_identity_test.go For more information on the signing algorithm refer to: https://docs.cloud.oracle.com/Content/API/Concepts/signingrequests.htm Some operations accept or return polymorphic JSON objects. The SDK models such objects as interfaces. Further the SDK provides structs that implement such interfaces. Thus, for all operations that expect interfaces as input, pass the struct in the SDK that satisfies such interface. For example: In the case of a polymorphic response you can type assert the interface to the expected type. For example: An example of polymorphic JSON request handling can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_test.go#L63 When calling a list operation, the operation will retrieve a page of results. To retrieve more data, call the list operation again, passing in the value of the most recent response's OpcNextPage as the value of Page in the next list operation call. When there is no more data the OpcNextPage field will be nil. An example of pagination using this logic can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_pagination_test.go The SDK has a built-in logging mechanism used internally. The internal logging logic is used to record the raw http requests, responses and potential errors when (un)marshalling request and responses. Built-in logging in the SDK is controlled via the environment variable "OCI_GO_SDK_DEBUG" and its contents. The below are possible values for the "OCI_GO_SDK_DEBUG" variable 1. "info" or "i" enables all info logging messages 2. "debug" or "d" enables all debug and info logging messages 3. "verbose" or "v" or "1" enables all verbose, debug and info logging messages 4. "null" turns all logging messages off. If the value of the environment variable does not match any of the above then default logging level is "info". If the environment variable is not present then no logging messages are emitted. The default destination for logging is Stderr and if you want to output log to a file you can set via environment variable "OCI_GO_SDK_LOG_OUTPUT_MODE". The below are possible values 1. "file" or "f" enables all logging output saved to file 2. "combine" or "c" enables all logging output to both stderr and file You can also customize the log file location and name via "OCI_GO_SDK_LOG_FILE" environment variable, the value should be the path to a specific file If this environment variable is not present, the default location will be the project root path Sometimes you may need to wait until an attribute of a resource, such as an instance or a VCN, reaches a certain state. An example of this would be launching an instance and then waiting for the instance to become available, or waiting until a subnet in a VCN has been terminated. You might also want to retry the same operation again if there's network issue etc... This can be accomplished by using the RequestMetadata.RetryPolicy(request level configuration), alternatively, global(all services) or client level RetryPolicy configration is also possible. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_retry_test.go If you are trying to make a PUT/POST API call with binary request body, please make sure the binary request body is resettable, which means the request body should inherit Seeker interface. The Retry behavior Precedence (Highest to lowest) is defined as below:- The OCI Go SDK defines a default retry policy that retries on the errors suitable for retries (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm), for a recommended period of time (up to 7 attempts spread out over at most approximately 1.5 minutes). This default retry policy can be created using: You can set this retry policy for a single request: or for all requests made by a client: or for all requests made by all clients: or setting default retry via environment varaible, which is a global switch for all services: Some services enable retry for operations by default, this can be overridden using any alternatives mentioned above. Some resources may have to be replicated across regions and are only eventually consistent. That means the request to create, update, or delete the resource succeeded, but the resource is not available everywhere immediately. Creating, updating, or deleting any resource in the Identity service is affected by eventual consistency, and doing so may cause other operations in other services to fail until the Identity resource has been replicated. For example, the request to CreateTag in the Identity service in the home region succeeds, but immediately using that created tag in another region in a request to LaunchInstance in the Compute service may fail. If you are creating, updating, or deleting resources in the Identity service, we recommend using an eventually consistent retry policy for any service you access. The default retry policy already deals with eventual consistency. Example: This retry policy will use a different strategy if an eventually consistent change was made in the recent past (called the "eventually consistent window", currently defined to be 4 minutes after the eventually consistent change). This special retry policy for eventual consistency will: 1. make up to 9 attempts (including the initial attempt); if an attempt is successful, no more attempts will be made 2. retry at most until (a) approximately the end of the eventually consistent window or (b) the end of the default retry period of about 1.5 minutes, whichever is farther in the future; if an attempt is successful, no more attempts will be made, and the OCI Go SDK will not wait any longer 3. retry on the error codes 400-RelatedResourceNotAuthorizedOrNotFound, 404-NotAuthorizedOrNotFound, and 409-NotAuthorizedOrResourceAlreadyExists, for which the default retry policy does not retry, in addition to the errors the default retry policy retries on (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm) If there were no eventually consistent actions within the recent past, then this special retry strategy is not used. If you want a retry policy that does not handle eventual consistency in a special way, for example because you retry on all error responses, you can use DefaultRetryPolicyWithoutEventualConsistency or NewRetryPolicyWithOptions with the common.ReplaceWithValuesFromRetryPolicy(common.DefaultRetryPolicyWithoutEventualConsistency()) option: The NewRetryPolicy function also creates a retry policy without eventual consistency. Circuit Breaker can prevent an application repeatedly trying to execute an operation that is likely to fail, allowing it to continue without waiting for the fault to be rectified or wasting CPU cycles, of course, it also enables an application to detect whether the fault has been resolved. If the problem appears to have been rectified, the application can attempt to invoke the operation. Go SDK intergrates sony/gobreaker solution, wraps in a circuit breaker object, which monitors for failures. Once the failures reach a certain threshold, the circuit breaker trips, and all further calls to the circuit breaker return with an error, this also saves the service from being overwhelmed with network calls in case of an outage. Go SDK enable circuit breaker with default configuration, if you don't want to enable the solution, can disable the functionality before your application running Go SDK also supports customize Circuit Breaker with specified configuratoins. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_circuitbreaker_test.go The GO SDK uses the net/http package to make calls to OCI services. If your environment requires you to use a proxy server for outgoing HTTP requests then you can set this up in the following ways: 1. Configuring environment variable as described here https://golang.org/pkg/net/http/#ProxyFromEnvironment 2. Modifying the underlying Transport struct for a service client In order to modify the underlying Transport struct in HttpClient, you can do something similar to (sample code for audit service client): The Object Storage service supports multipart uploads to make large object uploads easier by splitting the large object into parts. The Go SDK supports raw multipart upload operations for advanced use cases, as well as a higher level upload class that uses the multipart upload APIs. For links to the APIs used for multipart upload operations, see Managing Multipart Uploads (https://docs.cloud.oracle.com/iaas/Content/Object/Tasks/usingmultipartuploads.htm). Higher level multipart uploads are implemented using the UploadManager, which will: split a large object into parts for you, upload the parts in parallel, and then recombine and commit the parts as a single object in storage. This code sample shows how to use the UploadManager to automatically split an object into parts for upload to simplify interaction with the Object Storage service: https://github.com/oracle/oci-go-sdk/blob/master/example/example_objectstorage_test.go Some response fields are enum-typed. In the future, individual services may return values not covered by existing enums for that field. To address this possibility, every enum-type response field is a modeled as a type that supports any string. Thus if a service returns a value that is not recognized by your version of the SDK, then the response field will be set to this value. When individual services return a polymorphic JSON response not available as a concrete struct, the SDK will return an implementation that only satisfies the interface modeling the polymorphic JSON response. If you are using a version of the SDK released prior to the announcement of a new region, you may need to use a workaround to reach it, depending on whether the region is in the oraclecloud.com realm. A region is a localized geographic area. For more information on regions and how to identify them, see Regions and Availability Domains(https://docs.cloud.oracle.com/iaas/Content/General/Concepts/regions.htm). A realm is a set of regions that share entities. You can identify your realm by looking at the domain name at the end of the network address. For example, the realm for xyz.abc.123.oraclecloud.com is oraclecloud.com. oraclecloud.com Realm: For regions in the oraclecloud.com realm, even if common.Region does not contain the new region, the forward compatibility of the SDK can automatically handle it. You can pass new region names just as you would pass ones that are already defined. For more information on passing region names in the configuration, see Configuring (https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring). For details on common.Region, see (https://github.com/oracle/oci-go-sdk/blob/master/common/common.go). Other Realms: For regions in realms other than oraclecloud.com, you can use the following workarounds to reach new regions with earlier versions of the SDK. NOTE: Be sure to supply the appropriate endpoints for your region. You can overwrite the target host with client.Host: If you are authenticating via instance principals, you can set the authentication endpoint in an environment variable: Got a fix for a bug, or a new feature you'd like to contribute? The SDK is open source and accepting pull requests on GitHub https://github.com/oracle/oci-go-sdk Licensing information available at: https://github.com/oracle/oci-go-sdk/blob/master/LICENSE.txt To be notified when a new version of the Go SDK is released, subscribe to the following feed: https://github.com/oracle/oci-go-sdk/releases.atom Please refer to this link: https://github.com/oracle/oci-go-sdk#help

This is the official Go SDK for Oracle Cloud Infrastructure Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#installing for installation instructions. Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring for configuration instructions. The following example shows how to get started with the SDK. The example belows creates an identityClient struct with the default configuration. It then utilizes the identityClient to list availability domains and prints them out to stdout More examples can be found in the SDK Github repo: https://github.com/oracle/oci-go-sdk/tree/master/example Optional fields are represented with the `mandatory:"false"` tag on input structs. The SDK will omit all optional fields that are nil when making requests. In the case of enum-type fields, the SDK will omit fields whose value is an empty string. The SDK uses pointers for primitive types in many input structs. To aid in the construction of such structs, the SDK provides functions that return a pointer for a given value. For example: The SDK exposes functionality that allows the user to customize any http request before is sent to the service. You can do so by setting the `Interceptor` field in any of the `Client` structs. For example: The Interceptor closure gets called before the signing process, thus any changes done to the request will be properly signed and submitted to the service. The SDK exposes a stand-alone signer that can be used to signing custom requests. Related code can be found here: https://github.com/oracle/oci-go-sdk/blob/master/common/http_signer.go. The example below shows how to create a default signer. The signer also allows more granular control on the headers used for signing. For example: You can combine a custom signer with the exposed clients in the SDK. This allows you to add custom signed headers to the request. Following is an example: Bear in mind that some services have a white list of headers that it expects to be signed. Therefore, adding an arbitrary header can result in authentications errors. To see a runnable example, see https://github.com/oracle/oci-go-sdk/blob/master/example/example_identity_test.go For more information on the signing algorithm refer to: https://docs.cloud.oracle.com/Content/API/Concepts/signingrequests.htm Some operations accept or return polymorphic JSON objects. The SDK models such objects as interfaces. Further the SDK provides structs that implement such interfaces. Thus, for all operations that expect interfaces as input, pass the struct in the SDK that satisfies such interface. For example: In the case of a polymorphic response you can type assert the interface to the expected type. For example: An example of polymorphic JSON request handling can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_test.go#L63 When calling a list operation, the operation will retrieve a page of results. To retrieve more data, call the list operation again, passing in the value of the most recent response's OpcNextPage as the value of Page in the next list operation call. When there is no more data the OpcNextPage field will be nil. An example of pagination using this logic can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_pagination_test.go The SDK has a built-in logging mechanism used internally. The internal logging logic is used to record the raw http requests, responses and potential errors when (un)marshalling request and responses. Built-in logging in the SDK is controlled via the environment variable "OCI_GO_SDK_DEBUG" and its contents. The below are possible values for the "OCI_GO_SDK_DEBUG" variable 1. "info" or "i" enables all info logging messages 2. "debug" or "d" enables all debug and info logging messages 3. "verbose" or "v" or "1" enables all verbose, debug and info logging messages 4. "null" turns all logging messages off. If the value of the environment variable does not match any of the above then default logging level is "info". If the environment variable is not present then no logging messages are emitted. The default destination for logging is Stderr and if you want to output log to a file you can set via environment variable "OCI_GO_SDK_LOG_OUTPUT_MODE". The below are possible values 1. "file" or "f" enables all logging output saved to file 2. "combine" or "c" enables all logging output to both stderr and file You can also customize the log file location and name via "OCI_GO_SDK_LOG_FILE" environment variable, the value should be the path to a specific file If this environment variable is not present, the default location will be the project root path Sometimes you may need to wait until an attribute of a resource, such as an instance or a VCN, reaches a certain state. An example of this would be launching an instance and then waiting for the instance to become available, or waiting until a subnet in a VCN has been terminated. You might also want to retry the same operation again if there's network issue etc... This can be accomplished by using the RequestMetadata.RetryPolicy. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_retry_test.go The GO SDK uses the net/http package to make calls to OCI services. If your environment requires you to use a proxy server for outgoing HTTP requests then you can set this up in the following ways: 1. Configuring environment variable as described here https://golang.org/pkg/net/http/#ProxyFromEnvironment 2. Modifying the underlying Transport struct for a service client In order to modify the underlying Transport struct in HttpClient, you can do something similar to (sample code for audit service client): The Object Storage service supports multipart uploads to make large object uploads easier by splitting the large object into parts. The Go SDK supports raw multipart upload operations for advanced use cases, as well as a higher level upload class that uses the multipart upload APIs. For links to the APIs used for multipart upload operations, see Managing Multipart Uploads (https://docs.cloud.oracle.com/iaas/Content/Object/Tasks/usingmultipartuploads.htm). Higher level multipart uploads are implemented using the UploadManager, which will: split a large object into parts for you, upload the parts in parallel, and then recombine and commit the parts as a single object in storage. This code sample shows how to use the UploadManager to automatically split an object into parts for upload to simplify interaction with the Object Storage service: https://github.com/oracle/oci-go-sdk/blob/master/example/example_objectstorage_test.go Some response fields are enum-typed. In the future, individual services may return values not covered by existing enums for that field. To address this possibility, every enum-type response field is a modeled as a type that supports any string. Thus if a service returns a value that is not recognized by your version of the SDK, then the response field will be set to this value. When individual services return a polymorphic JSON response not available as a concrete struct, the SDK will return an implementation that only satisfies the interface modeling the polymorphic JSON response. If you are using a version of the SDK released prior to the announcement of a new region, you may need to use a workaround to reach it, depending on whether the region is in the oraclecloud.com realm. A region is a localized geographic area. For more information on regions and how to identify them, see Regions and Availability Domains(https://docs.cloud.oracle.com/iaas/Content/General/Concepts/regions.htm). A realm is a set of regions that share entities. You can identify your realm by looking at the domain name at the end of the network address. For example, the realm for xyz.abc.123.oraclecloud.com is oraclecloud.com. oraclecloud.com Realm: For regions in the oraclecloud.com realm, even if common.Region does not contain the new region, the forward compatibility of the SDK can automatically handle it. You can pass new region names just as you would pass ones that are already defined. For more information on passing region names in the configuration, see Configuring (https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring). For details on common.Region, see (https://github.com/oracle/oci-go-sdk/blob/master/common/common.go). Other Realms: For regions in realms other than oraclecloud.com, you can use the following workarounds to reach new regions with earlier versions of the SDK. NOTE: Be sure to supply the appropriate endpoints for your region. You can overwrite the target host with client.Host: If you are authenticating via instance principals, you can set the authentication endpoint in an environment variable: Got a fix for a bug, or a new feature you'd like to contribute? The SDK is open source and accepting pull requests on GitHub https://github.com/oracle/oci-go-sdk Licensing information available at: https://github.com/oracle/oci-go-sdk/blob/master/LICENSE.txt To be notified when a new version of the Go SDK is released, subscribe to the following feed: https://github.com/oracle/oci-go-sdk/releases.atom Please refer to this link: https://github.com/oracle/oci-go-sdk#help

Package dom provides Go bindings for the JavaScript DOM APIs. This package is an in progress effort of providing idiomatic Go bindings for the DOM, wrapping the JavaScript DOM APIs. The API is neither complete nor frozen yet, but a great amount of the DOM is already usable. While the package tries to be idiomatic Go, it also tries to stick closely to the JavaScript APIs, so that one does not need to learn a new set of APIs if one is already familiar with it. One decision that hasn't been made yet is what parts exactly should be part of this package. It is, for example, possible that the canvas APIs will live in a separate package. On the other hand, types such as StorageEvent (the event that gets fired when the HTML5 storage area changes) will be part of this package, simply due to how the DOM is structured – even if the actual storage APIs might live in a separate package. This might require special care to avoid circular dependencies. The documentation for some of the identifiers is based on the MDN Web Docs by Mozilla Contributors (https://developer.mozilla.org/en-US/docs/Web/API), licensed under CC-BY-SA 2.5 (https://creativecommons.org/licenses/by-sa/2.5/). The usual entry point of using the dom package is by using the GetWindow() function which will return a Window, from which you can get things such as the current Document. The DOM has a big amount of different element and event types, but they all follow three interfaces. All functions that work on or return generic elements/events will return one of the three interfaces Element, HTMLElement or Event. In these interface values there will be concrete implementations, such as HTMLParagraphElement or FocusEvent. It's also not unusual that values of type Element also implement HTMLElement. In all cases, type assertions can be used. Example: Several functions in the JavaScript DOM return "live" collections of elements, that is collections that will be automatically updated when elements get removed or added to the DOM. Our bindings, however, return static slices of elements that, once created, will not automatically reflect updates to the DOM. This is primarily done so that slices can actually be used, as opposed to a form of iterator, but also because we think that magically changing data isn't Go's nature and that snapshots of state are a lot easier to reason about. This does not, however, mean that all objects are snapshots. Elements, events and generally objects that aren't slices or maps are simple wrappers around JavaScript objects, and as such attributes as well as method calls will always return the most current data. To reflect this behavior, these bindings use pointers to make the semantics clear. Consider the following example: The above example will print `true`. Some objects in the JS API have two versions of attributes, one that returns a string and one that returns a DOMTokenList to ease manipulation of string-delimited lists. Some other objects only provide DOMTokenList, sometimes DOMSettableTokenList. To simplify these bindings, only the DOMTokenList variant will be made available, by the type TokenList. In cases where the string attribute was the only way to completely replace the value, our TokenList will provide Set([]string) and SetString(string) methods, which will be able to accomplish the same. Additionally, our TokenList will provide methods to convert it to strings and slices. This package has a relatively stable API. However, there will be backwards incompatible changes from time to time. This is because the package isn't complete yet, as well as because the DOM is a moving target, and APIs do change sometimes. While an attempt is made to reduce changing function signatures to a minimum, it can't always be guaranteed. Sometimes mistakes in the bindings are found that require changing arguments or return values. Interfaces defined in this package may also change on a semi-regular basis, as new methods are added to them. This happens because the bindings aren't complete and can never really be, as new features are added to the DOM.