Package engineapi provides libraries to implement client and server components compatible with the Docker engine.
Package lumberjack provides a rolling logger. Note that this is v2.0 of lumberjack, and should be imported using gopkg.in thusly: The package name remains simply lumberjack, and the code resides at https://github.com/natefinch/lumberjack under the v2.0 branch. Lumberjack is intended to be one part of a logging infrastructure. It is not an all-in-one solution, but instead is a pluggable component at the bottom of the logging stack that simply controls the files to which logs are written. Lumberjack plays well with any logging package that can write to an io.Writer, including the standard library's log package. Lumberjack assumes that only one process is writing to the output files. Using the same lumberjack configuration from multiple processes on the same machine will result in improper behavior. To use lumberjack with the standard library's log package, just pass it into the SetOutput function when your application starts.
Package excelize providing a set of functions that allow you to write to and read from XLAM / XLSM / XLSX / XLTM / XLTX files. Supports reading and writing spreadsheet documents generated by Microsoft Excel™ 2007 and later. Supports complex components by high compatibility, and provided streaming API for generating or reading data from a worksheet with huge amounts of data. This library needs Go version 1.16 or later. See https://xuri.me/excelize for more information about this package.
Package lumberjack provides a rolling logger. Note that this is v3.0 of lumberjack. Lumberjack is intended to be one part of a logging infrastructure. It is not an all-in-one solution, but instead is a pluggable component at the bottom of the logging stack that simply controls the files to which logs are written. Lumberjack plays well with any logging package that can write to an io.Writer, including the standard library's log package. Lumberjack assumes that only one process is writing to the output files. Using the same lumberjack configuration from multiple processes on the same machine will result in improper behavior. Letting outside processes write to or manipulate the file that lumberjack writes to will also result in improper behavior. To use lumberjack with the standard library's log package, just pass it into the SetOutput function when your application starts.
Fluux XMPP is an modern and full-featured XMPP library that can be used to build clients or server components.
Package sdk is the official AWS SDK for the Go programming language. The AWS SDK for Go provides APIs and utilities that developers can use to build Go applications that use AWS services, such as Amazon Elastic Compute Cloud (Amazon EC2) and Amazon Simple Storage Service (Amazon S3). The SDK removes the complexity of coding directly against a web service interface. It hides a lot of the lower-level plumbing, such as authentication, request retries, and error handling. The SDK also includes helpful utilities on top of the AWS APIs that add additional capabilities and functionality. For example, the Amazon S3 Download and Upload Manager will automatically split up large objects into multiple parts and transfer them concurrently. See the s3manager package documentation for more information. https://docs.aws.amazon.com/sdk-for-go/api/service/s3/s3manager/ Checkout the Getting Started Guide and API Reference Docs detailed the SDK's components and details on each AWS client the SDK supports. The Getting Started Guide provides examples and detailed description of how to get setup with the SDK. https://docs.aws.amazon.com/sdk-for-go/v1/developer-guide/welcome.html The API Reference Docs include a detailed breakdown of the SDK's components such as utilities and AWS clients. Use this as a reference of the Go types included with the SDK, such as AWS clients, API operations, and API parameters. https://docs.aws.amazon.com/sdk-for-go/api/ The SDK is composed of two main components, SDK core, and service clients. The SDK core packages are all available under the aws package at the root of the SDK. Each client for a supported AWS service is available within its own package under the service folder at the root of the SDK. aws - SDK core, provides common shared types such as Config, Logger, and utilities to make working with API parameters easier. awserr - Provides the error interface that the SDK will use for all errors that occur in the SDK's processing. This includes service API response errors as well. The Error type is made up of a code and message. Cast the SDK's returned error type to awserr.Error and call the Code method to compare returned error to specific error codes. See the package's documentation for additional values that can be extracted such as RequestId. credentials - Provides the types and built in credentials providers the SDK will use to retrieve AWS credentials to make API requests with. Nested under this folder are also additional credentials providers such as stscreds for assuming IAM roles, and ec2rolecreds for EC2 Instance roles. endpoints - Provides the AWS Regions and Endpoints metadata for the SDK. Use this to lookup AWS service endpoint information such as which services are in a region, and what regions a service is in. Constants are also provided for all region identifiers, e.g UsWest2RegionID for "us-west-2". session - Provides initial default configuration, and load configuration from external sources such as environment and shared credentials file. request - Provides the API request sending, and retry logic for the SDK. This package also includes utilities for defining your own request retryer, and configuring how the SDK processes the request. service - Clients for AWS services. All services supported by the SDK are available under this folder. The SDK includes the Go types and utilities you can use to make requests to AWS service APIs. Within the service folder at the root of the SDK you'll find a package for each AWS service the SDK supports. All service clients follows a common pattern of creation and usage. When creating a client for an AWS service you'll first need to have a Session value constructed. The Session provides shared configuration that can be shared between your service clients. When service clients are created you can pass in additional configuration via the aws.Config type to override configuration provided by in the Session to create service client instances with custom configuration. Once the service's client is created you can use it to make API requests the AWS service. These clients are safe to use concurrently. In the AWS SDK for Go, you can configure settings for service clients, such as the log level and maximum number of retries. Most settings are optional; however, for each service client, you must specify a region and your credentials. The SDK uses these values to send requests to the correct AWS region and sign requests with the correct credentials. You can specify these values as part of a session or as environment variables. See the SDK's configuration guide for more information. https://docs.aws.amazon.com/sdk-for-go/v1/developer-guide/configuring-sdk.html See the session package documentation for more information on how to use Session with the SDK. https://docs.aws.amazon.com/sdk-for-go/api/aws/session/ See the Config type in the aws package for more information on configuration options. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config When using the SDK you'll generally need your AWS credentials to authenticate with AWS services. The SDK supports multiple methods of supporting these credentials. By default the SDK will source credentials automatically from its default credential chain. See the session package for more information on this chain, and how to configure it. The common items in the credential chain are the following: Environment Credentials - Set of environment variables that are useful when sub processes are created for specific roles. Shared Credentials file (~/.aws/credentials) - This file stores your credentials based on a profile name and is useful for local development. EC2 Instance Role Credentials - Use EC2 Instance Role to assign credentials to application running on an EC2 instance. This removes the need to manage credential files in production. Credentials can be configured in code as well by setting the Config's Credentials value to a custom provider or using one of the providers included with the SDK to bypass the default credential chain and use a custom one. This is helpful when you want to instruct the SDK to only use a specific set of credentials or providers. This example creates a credential provider for assuming an IAM role, "myRoleARN" and configures the S3 service client to use that role for API requests. See the credentials package documentation for more information on credential providers included with the SDK, and how to customize the SDK's usage of credentials. https://docs.aws.amazon.com/sdk-for-go/api/aws/credentials The SDK has support for the shared configuration file (~/.aws/config). This support can be enabled by setting the environment variable, "AWS_SDK_LOAD_CONFIG=1", or enabling the feature in code when creating a Session via the Option's SharedConfigState parameter. In addition to the credentials you'll need to specify the region the SDK will use to make AWS API requests to. In the SDK you can specify the region either with an environment variable, or directly in code when a Session or service client is created. The last value specified in code wins if the region is specified multiple ways. To set the region via the environment variable set the "AWS_REGION" to the region you want to the SDK to use. Using this method to set the region will allow you to run your application in multiple regions without needing additional code in the application to select the region. The endpoints package includes constants for all regions the SDK knows. The values are all suffixed with RegionID. These values are helpful, because they reduce the need to type the region string manually. To set the region on a Session use the aws package's Config struct parameter Region to the AWS region you want the service clients created from the session to use. This is helpful when you want to create multiple service clients, and all of the clients make API requests to the same region. See the endpoints package for the AWS Regions and Endpoints metadata. https://docs.aws.amazon.com/sdk-for-go/api/aws/endpoints/ In addition to setting the region when creating a Session you can also set the region on a per service client bases. This overrides the region of a Session. This is helpful when you want to create service clients in specific regions different from the Session's region. See the Config type in the aws package for more information and additional options such as setting the Endpoint, and other service client configuration options. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config Once the client is created you can make an API request to the service. Each API method takes a input parameter, and returns the service response and an error. The SDK provides methods for making the API call in multiple ways. In this list we'll use the S3 ListObjects API as an example for the different ways of making API requests. ListObjects - Base API operation that will make the API request to the service. ListObjectsRequest - API methods suffixed with Request will construct the API request, but not send it. This is also helpful when you want to get a presigned URL for a request, and share the presigned URL instead of your application making the request directly. ListObjectsPages - Same as the base API operation, but uses a callback to automatically handle pagination of the API's response. ListObjectsWithContext - Same as base API operation, but adds support for the Context pattern. This is helpful for controlling the canceling of in flight requests. See the Go standard library context package for more information. This method also takes request package's Option functional options as the variadic argument for modifying how the request will be made, or extracting information from the raw HTTP response. ListObjectsPagesWithContext - same as ListObjectsPages, but adds support for the Context pattern. Similar to ListObjectsWithContext this method also takes the request package's Option function option types as the variadic argument. In addition to the API operations the SDK also includes several higher level methods that abstract checking for and waiting for an AWS resource to be in a desired state. In this list we'll use WaitUntilBucketExists to demonstrate the different forms of waiters. WaitUntilBucketExists. - Method to make API request to query an AWS service for a resource's state. Will return successfully when that state is accomplished. WaitUntilBucketExistsWithContext - Same as WaitUntilBucketExists, but adds support for the Context pattern. In addition these methods take request package's WaiterOptions to configure the waiter, and how underlying request will be made by the SDK. The API method will document which error codes the service might return for the operation. These errors will also be available as const strings prefixed with "ErrCode" in the service client's package. If there are no errors listed in the API's SDK documentation you'll need to consult the AWS service's API documentation for the errors that could be returned. Pagination helper methods are suffixed with "Pages", and provide the functionality needed to round trip API page requests. Pagination methods take a callback function that will be called for each page of the API's response. Waiter helper methods provide the functionality to wait for an AWS resource state. These methods abstract the logic needed to to check the state of an AWS resource, and wait until that resource is in a desired state. The waiter will block until the resource is in the state that is desired, an error occurs, or the waiter times out. If a resource times out the error code returned will be request.WaiterResourceNotReadyErrorCode. This example shows a complete working Go file which will upload a file to S3 and use the Context pattern to implement timeout logic that will cancel the request if it takes too long. This example highlights how to use sessions, create a service client, make a request, handle the error, and process the response.
Package lumberjack provides a rolling logger. Lumberjack is intended to be one part of a logging infrastructure. It is not an all-in-one solution, but instead is a pluggable component at the bottom of the logging stack that simply controls the files to which logs are written. Lumberjack plays well with any logger that can write to an io.Writer, including the standard library's log package. Lumberjack assumes that only one process is writing to the output files. Using the same lumberjack configuration from multiple processes on the same machine will result in improper behavior. To use lumberjack with the standard library's log package, just pass it into the SetOutput function when your application starts.
Package enmime implements a MIME encoding and decoding library. It's built on top of Go's included mime/multipart support where possible, but is geared towards parsing MIME encoded emails. The enmime API has two conceptual layers. The lower layer is a tree of Part structs, representing each component of a decoded MIME message. The upper layer, called an Envelope provides an intuitive way to interact with a MIME message. Calling ReadParts causes enmime to parse the body of a MIME message into a tree of Part objects, each of which is aware of its content type, filename and headers. The content of a Part is available as a slice of bytes via the Content field. If the part was encoded in quoted-printable or base64, it is decoded prior to being placed in Content. If the Part contains text in a character set other than utf-8, enmime will attempt to convert it to utf-8. To locate a particular Part, pass a custom PartMatcher function into the BreadthMatchFirst() or DepthMatchFirst() methods to search the Part tree. BreadthMatchAll() and DepthMatchAll() will collect all Parts matching your criteria. ReadEnvelope returns an Envelope struct. Behind the scenes a Part tree is constructed, and then sorted into the correct fields of the Envelope. The Envelope contains both the plain text and HTML portions of the email. If there was no plain text Part available, the HTML Part will be down-converted using the html2text library1. The root of the Part tree, as well as slices of the inline and attachment Parts are also available. Every MIME Part has its own headers, accessible via the Part.Header field. The raw headers for an Envelope are available in Root.Header. Envelope also provides helper methods to fetch headers: GetHeader(key) will return the RFC 2047 decoded value of the specified header. AddressList(key) will convert the specified address header into a slice of net/mail.Address values. enmime attempts to be tolerant of poorly encoded MIME messages. In situations where parsing is not possible, the ReadEnvelope and ReadParts functions will return a hard error. If enmime is able to continue parsing the message, it will add an entry to the Errors slice on the relevant Part. After parsing is complete, all Part errors will be appended to the Envelope Errors slice. The Error* constants can be used to identify a specific class of error. Please note that enmime parses messages into memory, so it is not likely to perform well with multi-gigabyte attachments. enmime is open source software released under the MIT License. The latest version can be found at https://github.com/jhillyerd/enmime
Package sdk is the official AWS SDK for the Go programming language. The AWS SDK for Go provides APIs and utilities that developers can use to build Go applications that use AWS services, such as Amazon Elastic Compute Cloud (Amazon EC2) and Amazon Simple Storage Service (Amazon S3). The SDK removes the complexity of coding directly against a web service interface. It hides a lot of the lower-level plumbing, such as authentication, request retries, and error handling. The SDK also includes helpful utilities on top of the AWS APIs that add additional capabilities and functionality. For example, the Amazon S3 Download and Upload Manager will automatically split up large objects into multiple parts and transfer them concurrently. See the s3manager package documentation for more information. https://docs.aws.amazon.com/sdk-for-go/api/service/s3/s3manager/ Checkout the Getting Started Guide and API Reference Docs detailed the SDK's components and details on each AWS client the SDK supports. The Getting Started Guide provides examples and detailed description of how to get setup with the SDK. https://docs.aws.amazon.com/sdk-for-go/v1/developer-guide/welcome.html The API Reference Docs include a detailed breakdown of the SDK's components such as utilities and AWS clients. Use this as a reference of the Go types included with the SDK, such as AWS clients, API operations, and API parameters. https://docs.aws.amazon.com/sdk-for-go/api/ The SDK is composed of two main components, SDK core, and service clients. The SDK core packages are all available under the aws package at the root of the SDK. Each client for a supported AWS service is available within its own package under the service folder at the root of the SDK. aws - SDK core, provides common shared types such as Config, Logger, and utilities to make working with API parameters easier. awserr - Provides the error interface that the SDK will use for all errors that occur in the SDK's processing. This includes service API response errors as well. The Error type is made up of a code and message. Cast the SDK's returned error type to awserr.Error and call the Code method to compare returned error to specific error codes. See the package's documentation for additional values that can be extracted such as RequestId. credentials - Provides the types and built in credentials providers the SDK will use to retrieve AWS credentials to make API requests with. Nested under this folder are also additional credentials providers such as stscreds for assuming IAM roles, and ec2rolecreds for EC2 Instance roles. endpoints - Provides the AWS Regions and Endpoints metadata for the SDK. Use this to lookup AWS service endpoint information such as which services are in a region, and what regions a service is in. Constants are also provided for all region identifiers, e.g UsWest2RegionID for "us-west-2". session - Provides initial default configuration, and load configuration from external sources such as environment and shared credentials file. request - Provides the API request sending, and retry logic for the SDK. This package also includes utilities for defining your own request retryer, and configuring how the SDK processes the request. service - Clients for AWS services. All services supported by the SDK are available under this folder. The SDK includes the Go types and utilities you can use to make requests to AWS service APIs. Within the service folder at the root of the SDK you'll find a package for each AWS service the SDK supports. All service clients follows a common pattern of creation and usage. When creating a client for an AWS service you'll first need to have a Session value constructed. The Session provides shared configuration that can be shared between your service clients. When service clients are created you can pass in additional configuration via the aws.Config type to override configuration provided by in the Session to create service client instances with custom configuration. Once the service's client is created you can use it to make API requests the AWS service. These clients are safe to use concurrently. In the AWS SDK for Go, you can configure settings for service clients, such as the log level and maximum number of retries. Most settings are optional; however, for each service client, you must specify a region and your credentials. The SDK uses these values to send requests to the correct AWS region and sign requests with the correct credentials. You can specify these values as part of a session or as environment variables. See the SDK's configuration guide for more information. https://docs.aws.amazon.com/sdk-for-go/v1/developer-guide/configuring-sdk.html See the session package documentation for more information on how to use Session with the SDK. https://docs.aws.amazon.com/sdk-for-go/api/aws/session/ See the Config type in the aws package for more information on configuration options. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config When using the SDK you'll generally need your AWS credentials to authenticate with AWS services. The SDK supports multiple methods of supporting these credentials. By default the SDK will source credentials automatically from its default credential chain. See the session package for more information on this chain, and how to configure it. The common items in the credential chain are the following: Environment Credentials - Set of environment variables that are useful when sub processes are created for specific roles. Shared Credentials file (~/.aws/credentials) - This file stores your credentials based on a profile name and is useful for local development. EC2 Instance Role Credentials - Use EC2 Instance Role to assign credentials to application running on an EC2 instance. This removes the need to manage credential files in production. Credentials can be configured in code as well by setting the Config's Credentials value to a custom provider or using one of the providers included with the SDK to bypass the default credential chain and use a custom one. This is helpful when you want to instruct the SDK to only use a specific set of credentials or providers. This example creates a credential provider for assuming an IAM role, "myRoleARN" and configures the S3 service client to use that role for API requests. See the credentials package documentation for more information on credential providers included with the SDK, and how to customize the SDK's usage of credentials. https://docs.aws.amazon.com/sdk-for-go/api/aws/credentials The SDK has support for the shared configuration file (~/.aws/config). This support can be enabled by setting the environment variable, "AWS_SDK_LOAD_CONFIG=1", or enabling the feature in code when creating a Session via the Option's SharedConfigState parameter. In addition to the credentials you'll need to specify the region the SDK will use to make AWS API requests to. In the SDK you can specify the region either with an environment variable, or directly in code when a Session or service client is created. The last value specified in code wins if the region is specified multiple ways. To set the region via the environment variable set the "AWS_REGION" to the region you want to the SDK to use. Using this method to set the region will allow you to run your application in multiple regions without needing additional code in the application to select the region. The endpoints package includes constants for all regions the SDK knows. The values are all suffixed with RegionID. These values are helpful, because they reduce the need to type the region string manually. To set the region on a Session use the aws package's Config struct parameter Region to the AWS region you want the service clients created from the session to use. This is helpful when you want to create multiple service clients, and all of the clients make API requests to the same region. See the endpoints package for the AWS Regions and Endpoints metadata. https://docs.aws.amazon.com/sdk-for-go/api/aws/endpoints/ In addition to setting the region when creating a Session you can also set the region on a per service client bases. This overrides the region of a Session. This is helpful when you want to create service clients in specific regions different from the Session's region. See the Config type in the aws package for more information and additional options such as setting the Endpoint, and other service client configuration options. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config Once the client is created you can make an API request to the service. Each API method takes a input parameter, and returns the service response and an error. The SDK provides methods for making the API call in multiple ways. In this list we'll use the S3 ListObjects API as an example for the different ways of making API requests. ListObjects - Base API operation that will make the API request to the service. ListObjectsRequest - API methods suffixed with Request will construct the API request, but not send it. This is also helpful when you want to get a presigned URL for a request, and share the presigned URL instead of your application making the request directly. ListObjectsPages - Same as the base API operation, but uses a callback to automatically handle pagination of the API's response. ListObjectsWithContext - Same as base API operation, but adds support for the Context pattern. This is helpful for controlling the canceling of in flight requests. See the Go standard library context package for more information. This method also takes request package's Option functional options as the variadic argument for modifying how the request will be made, or extracting information from the raw HTTP response. ListObjectsPagesWithContext - same as ListObjectsPages, but adds support for the Context pattern. Similar to ListObjectsWithContext this method also takes the request package's Option function option types as the variadic argument. In addition to the API operations the SDK also includes several higher level methods that abstract checking for and waiting for an AWS resource to be in a desired state. In this list we'll use WaitUntilBucketExists to demonstrate the different forms of waiters. WaitUntilBucketExists. - Method to make API request to query an AWS service for a resource's state. Will return successfully when that state is accomplished. WaitUntilBucketExistsWithContext - Same as WaitUntilBucketExists, but adds support for the Context pattern. In addition these methods take request package's WaiterOptions to configure the waiter, and how underlying request will be made by the SDK. The API method will document which error codes the service might return for the operation. These errors will also be available as const strings prefixed with "ErrCode" in the service client's package. If there are no errors listed in the API's SDK documentation you'll need to consult the AWS service's API documentation for the errors that could be returned. Pagination helper methods are suffixed with "Pages", and provide the functionality needed to round trip API page requests. Pagination methods take a callback function that will be called for each page of the API's response. Waiter helper methods provide the functionality to wait for an AWS resource state. These methods abstract the logic needed to to check the state of an AWS resource, and wait until that resource is in a desired state. The waiter will block until the resource is in the state that is desired, an error occurs, or the waiter times out. If a resource times out the error code returned will be request.WaiterResourceNotReadyErrorCode. This example shows a complete working Go file which will upload a file to S3 and use the Context pattern to implement timeout logic that will cancel the request if it takes too long. This example highlights how to use sessions, create a service client, make a request, handle the error, and process the response.
Package azcore implements an HTTP request/response middleware pipeline used by Azure SDK clients. The middleware consists of three components. A Policy can be implemented in two ways; as a first-class function for a stateless Policy, or as a method on a type for a stateful Policy. Note that HTTP requests made via the same pipeline share the same Policy instances, so if a Policy mutates its state it MUST be properly synchronized to avoid race conditions. A Policy's Do method is called when an HTTP request wants to be sent over the network. The Do method can perform any operation(s) it desires. For example, it can log the outgoing request, mutate the URL, headers, and/or query parameters, inject a failure, etc. Once the Policy has successfully completed its request work, it must call the Next() method on the *policy.Request instance in order to pass the request to the next Policy in the chain. When an HTTP response comes back, the Policy then gets a chance to process the response/error. The Policy instance can log the response, retry the operation if it failed due to a transient error or timeout, unmarshal the response body, etc. Once the Policy has successfully completed its response work, it must return the *http.Response and error instances to its caller. Template for implementing a stateless Policy: Template for implementing a stateful Policy: The Transporter interface is responsible for sending the HTTP request and returning the corresponding HTTP response or error. The Transporter is invoked by the last Policy in the chain. The default Transporter implementation uses a shared http.Client from the standard library. The same stateful/stateless rules for Policy implementations apply to Transporter implementations. To use the Policy and Transporter instances, an application passes them to the runtime.NewPipeline function. The specified Policy instances form a chain and are invoked in the order provided to NewPipeline followed by the Transporter. Once the Pipeline has been created, create a runtime.Request instance and pass it to Pipeline's Do method. The Pipeline.Do method sends the specified Request through the chain of Policy and Transporter instances. The response/error is then sent through the same chain of Policy instances in reverse order. For example, assuming there are Policy types PolicyA, PolicyB, and PolicyC along with TransportA. The flow of Request and Response looks like the following: The Request instance passed to Pipeline's Do method is a wrapper around an *http.Request. It also contains some internal state and provides various convenience methods. You create a Request instance by calling the runtime.NewRequest function: If the Request should contain a body, call the SetBody method. A seekable stream is required so that upon retry, the retry Policy instance can seek the stream back to the beginning before retrying the network request and re-uploading the body. Operations like JSON-MERGE-PATCH send a JSON null to indicate a value should be deleted. This requirement conflicts with the SDK's default marshalling that specifies "omitempty" as a means to resolve the ambiguity between a field to be excluded and its zero-value. In the above example, Name and Count are defined as pointer-to-type to disambiguate between a missing value (nil) and a zero-value (0) which might have semantic differences. In a PATCH operation, any fields left as nil are to have their values preserved. When updating a Widget's count, one simply specifies the new value for Count, leaving Name nil. To fulfill the requirement for sending a JSON null, the NullValue() function can be used. This sends an explict "null" for Count, indicating that any current value for Count should be deleted. When the HTTP response is received, the *http.Response is returned directly. Each Policy instance can inspect/mutate the *http.Response. To enable logging, set environment variable AZURE_SDK_GO_LOGGING to "all" before executing your program. By default the logger writes to stderr. This can be customized by calling log.SetListener, providing a callback that writes to the desired location. Any custom logging implementation MUST provide its own synchronization to handle concurrent invocations. See the docs for the log package for further details. Pageable operations return potentially large data sets spread over multiple GET requests. The result of each GET is a "page" of data consisting of a slice of items. Pageable operations can be identified by their New*Pager naming convention and return type of *runtime.Pager[T]. The call to WidgetClient.NewListWidgetsPager() returns an instance of *runtime.Pager[T] for fetching pages and determining if there are more pages to fetch. No IO calls are made until the NextPage() method is invoked. Long-running operations (LROs) are operations consisting of an initial request to start the operation followed by polling to determine when the operation has reached a terminal state. An LRO's terminal state is one of the following values. LROs can be identified by their Begin* prefix and their return type of *runtime.Poller[T]. When a call to WidgetClient.BeginCreateOrUpdate() returns a nil error, it means that the LRO has started. It does _not_ mean that the widget has been created or updated (or failed to be created/updated). The *runtime.Poller[T] provides APIs for determining the state of the LRO. To wait for the LRO to complete, call the PollUntilDone() method. The call to PollUntilDone() will block the current goroutine until the LRO has reached a terminal state or the context is canceled/timed out. Note that LROs can take anywhere from several seconds to several minutes. The duration is operation-dependent. Due to this variant behavior, pollers do _not_ have a preconfigured time-out. Use a context with the appropriate cancellation mechanism as required. Pollers provide the ability to serialize their state into a "resume token" which can be used by another process to recreate the poller. This is achieved via the runtime.Poller[T].ResumeToken() method. Note that a token can only be obtained for a poller that's in a non-terminal state. Also note that any subsequent calls to poller.Poll() might change the poller's state. In this case, a new token should be created. After the token has been obtained, it can be used to recreate an instance of the originating poller. When resuming a poller, no IO is performed, and zero-value arguments can be used for everything but the Options.ResumeToken. Resume tokens are unique per service client and operation. Attempting to resume a poller for LRO BeginB() with a token from LRO BeginA() will result in an error.
Package engineapi provides libraries to implement client and server components compatible with the Docker engine.
Package lumberjack provides a rolling logger. Note that this is v2.0 of lumberjack, and should be imported using gopkg.in thusly: The package name remains simply lumberjack, and the code resides at https://github.com/natefinch/lumberjack under the v2.0 branch. Lumberjack is intended to be one part of a logging infrastructure. It is not an all-in-one solution, but instead is a pluggable component at the bottom of the logging stack that simply controls the files to which logs are written. Lumberjack plays well with any logging package that can write to an io.Writer, including the standard library's log package. Lumberjack assumes that only one process is writing to the output files. Using the same lumberjack configuration from multiple processes on the same machine will result in improper behavior. To use lumberjack with the standard library's log package, just pass it into the SetOutput function when your application starts.
Package engineapi provides libraries to implement client and server components compatible with the Docker engine.
Package lumberjack provides a rolling logger. Note that this is v2.0 of lumberjack, and should be imported using gopkg.in thusly: The package name remains simply lumberjack, and the code resides at https://github.com/natefinch/lumberjack under the v2.0 branch. Lumberjack is intended to be one part of a logging infrastructure. It is not an all-in-one solution, but instead is a pluggable component at the bottom of the logging stack that simply controls the files to which logs are written. Lumberjack plays well with any logging package that can write to an io.Writer, including the standard library's log package. Lumberjack assumes that only one process is writing to the output files. Using the same lumberjack configuration from multiple processes on the same machine will result in improper behavior. To use lumberjack with the standard library's log package, just pass it into the SetOutput function when your application starts.
Package connections provides libraries to work with network connections. This library is divided in several components for specific usage.
Package enmime implements a MIME encoding and decoding library. It's built on top of Go's included mime/multipart support where possible, but is geared towards parsing MIME encoded emails. The enmime API has two conceptual layers. The lower layer is a tree of Part structs, representing each component of a decoded MIME message. The upper layer, called an Envelope provides an intuitive way to interact with a MIME message. Calling ReadParts causes enmime to parse the body of a MIME message into a tree of Part objects, each of which is aware of its content type, filename and headers. The content of a Part is available as a slice of bytes via the Content field. If the part was encoded in quoted-printable or base64, it is decoded prior to being placed in Content. If the Part contains text in a character set other than utf-8, enmime will attempt to convert it to utf-8. To locate a particular Part, pass a custom PartMatcher function into the BreadthMatchFirst() or DepthMatchFirst() methods to search the Part tree. BreadthMatchAll() and DepthMatchAll() will collect all Parts matching your criteria. ReadEnvelope returns an Envelope struct. Behind the scenes a Part tree is constructed, and then sorted into the correct fields of the Envelope. The Envelope contains both the plain text and HTML portions of the email. If there was no plain text Part available, the HTML Part will be down-converted using the html2text library1. The root of the Part tree, as well as slices of the inline and attachment Parts are also available. Every MIME Part has its own headers, accessible via the Part.Header field. The raw headers for an Envelope are available in Root.Header. Envelope also provides helper methods to fetch headers: GetHeader(key) will return the RFC 2047 decoded value of the specified header. AddressList(key) will convert the specified address header into a slice of net/mail.Address values. enmime attempts to be tolerant of poorly encoded MIME messages. In situations where parsing is not possible, the ReadEnvelope and ReadParts functions will return a hard error. If enmime is able to continue parsing the message, it will add an entry to the Errors slice on the relevant Part. After parsing is complete, all Part errors will be appended to the Envelope Errors slice. The Error* constants can be used to identify a specific class of error. Please note that enmime parses messages into memory, so it is not likely to perform well with multi-gigabyte attachments. enmime is open source software released under the MIT License. The latest version can be found at https://github.com/jhillyerd/enmime
Package engineapi provides libraries to implement client and server components compatible with the Docker engine.
Package engineapi provides libraries to implement client and server components compatible with the Docker engine.
Package lumberjack provides a rolling logger. Note that this is v2.0 of lumberjack, and should be imported using gopkg.in thusly: The package name remains simply lumberjack, and the code resides at https://github.com/natefinch/lumberjack under the v2.0 branch. Lumberjack is intended to be one part of a logging infrastructure. It is not an all-in-one solution, but instead is a pluggable component at the bottom of the logging stack that simply controls the files to which logs are written. Lumberjack plays well with any logging package that can write to an io.Writer, including the standard library's log package. Lumberjack assumes that only one process is writing to the output files. Using the same lumberjack configuration from multiple processes on the same machine will result in improper behavior. To use lumberjack with the standard library's log package, just pass it into the SetOutput function when your application starts.
Package glitter is a library of UI components + themes for lipgloss, glamour, and bubbletea Summary Glitter is designed to make it easy for you to make beautiful terminal interfaces in Go.
Package engineapi provides libraries to implement client and server components compatible with the Docker engine.
Package lumberjack provides a rolling logger. Note that this is v2.0 of lumberjack, and should be imported using gopkg.in thusly: The package name remains simply lumberjack, and the code resides at https://github.com/natefinch/lumberjack under the v2.0 branch. Lumberjack is intended to be one part of a logging infrastructure. It is not an all-in-one solution, but instead is a pluggable component at the bottom of the logging stack that simply controls the files to which logs are written. Lumberjack plays well with any logging package that can write to an io.Writer, including the standard library's log package. Lumberjack assumes that only one process is writing to the output files. Using the same lumberjack configuration from multiple processes on the same machine will result in improper behavior. To use lumberjack with the standard library's log package, just pass it into the SetOutput function when your application starts.
Package lumberjack provides a rolling logger. Note that this is v2.0 of lumberjack, and should be imported using gopkg.in thusly: The package name remains simply lumberjack, and the code resides at https://github.com/natefinch/lumberjack under the v2.0 branch. Lumberjack is intended to be one part of a logging infrastructure. It is not an all-in-one solution, but instead is a pluggable component at the bottom of the logging stack that simply controls the files to which logs are written. Lumberjack plays well with any logging package that can write to an io.Writer, including the standard library's log package. Lumberjack assumes that only one process is writing to the output files. Using the same lumberjack configuration from multiple processes on the same machine will result in improper behavior. To use lumberjack with the standard library's log package, just pass it into the SetOutput function when your application starts.
Package lumberjack provides a rolling logger. Note that this is v2.0 of lumberjack, and should be imported using gopkg.in thusly: The package name remains simply lumberjack, and the code resides at https://github.com/natefinch/lumberjack under the v2.0 branch. Lumberjack is intended to be one part of a logging infrastructure. It is not an all-in-one solution, but instead is a pluggable component at the bottom of the logging stack that simply controls the files to which logs are written. Lumberjack plays well with any logging package that can write to an io.Writer, including the standard library's log package. Lumberjack assumes that only one process is writing to the output files. Using the same lumberjack configuration from multiple processes on the same machine will result in improper behavior. To use lumberjack with the standard library's log package, just pass it into the SetOutput function when your application starts.
Package lumberjack provides a rolling logger. Note that this is v2.0 of lumberjack, and should be imported using gopkg.in thusly: The package name remains simply lumberjack, and the code resides at https://github.com/natefinch/lumberjack under the v2.0 branch. Lumberjack is intended to be one part of a logging infrastructure. It is not an all-in-one solution, but instead is a pluggable component at the bottom of the logging stack that simply controls the files to which logs are written. Lumberjack plays well with any logging package that can write to an io.Writer, including the standard library's log package. Lumberjack assumes that only one process is writing to the output files. Using the same lumberjack configuration from multiple processes on the same machine will result in improper behavior. To use lumberjack with the standard library's log package, just pass it into the SetOutput function when your application starts.
Package lumberjack provides a rolling logger. Note that this is v2.0 of lumberjack, and should be imported using gopkg.in thusly: The package name remains simply lumberjack, and the code resides at https://github.com/natefinch/lumberjack under the v2.0 branch. Lumberjack is intended to be one part of a logging infrastructure. It is not an all-in-one solution, but instead is a pluggable component at the bottom of the logging stack that simply controls the files to which logs are written. Lumberjack plays well with any logging package that can write to an io.Writer, including the standard library's log package. Lumberjack assumes that only one process is writing to the output files. Using the same lumberjack configuration from multiple processes on the same machine will result in improper behavior. To use lumberjack with the standard library's log package, just pass it into the SetOutput function when your application starts.
Package lumberjack provides a rolling logger. Note that this is v2.0 of lumberjack, and should be imported using gopkg.in thusly: The package name remains simply lumberjack, and the code resides at https://github.com/natefinch/lumberjack under the v2.0 branch. Lumberjack is intended to be one part of a logging infrastructure. It is not an all-in-one solution, but instead is a pluggable component at the bottom of the logging stack that simply controls the files to which logs are written. Lumberjack plays well with any logging package that can write to an io.Writer, including the standard library's log package. Lumberjack assumes that only one process is writing to the output files. Using the same lumberjack configuration from multiple processes on the same machine will result in improper behavior. To use lumberjack with the standard library's log package, just pass it into the SetOutput function when your application starts.
package golog provides a small, fast JSON logger implementation and a minimal Logger interface suitable for replacing or wiring into standard library components.
Package lumberjack provides a rolling logger. Note that this is v2.0 of lumberjack, and should be imported using gopkg.in thusly: The package name remains simply lumberjack, and the code resides at https://github.com/covalenthq/lumberjack under the v2.0 branch. Lumberjack is intended to be one part of a logging infrastructure. It is not an all-in-one solution, but instead is a pluggable component at the bottom of the logging stack that simply controls the files to which logs are written. Lumberjack plays well with any logging package that can write to an io.Writer, including the standard library's log package. Lumberjack assumes that only one process is writing to the output files. Using the same lumberjack configuration from multiple processes on the same machine will result in improper behavior. To use lumberjack with the standard library's log package, just pass it into the SetOutput function when your application starts.
Package lumberjack provides a rolling logger. Note that this is v2.0 of lumberjack, and should be imported using gopkg.in thusly: The package name remains simply lumberjack, and the code resides at https://github.com/natefinch/lumberjack under the v2.0 branch. Lumberjack is intended to be one part of a logging infrastructure. It is not an all-in-one solution, but instead is a pluggable component at the bottom of the logging stack that simply controls the files to which logs are written. Lumberjack plays well with any logging package that can write to an io.Writer, including the standard library's log package. Lumberjack assumes that only one process is writing to the output files. Using the same lumberjack configuration from multiple processes on the same machine will result in improper behavior. To use lumberjack with the standard library's log package, just pass it into the SetOutput function when your application starts.
Package bubbles provides a collection of TUI components that can be used to create a TUI using the popular charmbracelet bubbletea library [charmbracelet]: https://github.com/charmbracelet [bubbletea]: https://github.com/charmbracelet/bubbletea
donburi is an Entity Component System library for Go/Ebitengine inspired by legion.