HTTP Request

Package rehttp implements an HTTP transport that handles retries. An HTTP client can be created with a *rehttp.Transport as RoundTripper and it will apply the retry strategy to its requests. The retry strategy is provided by the Transport, which determines whether or not the request should be retried, and if so, what delay to apply before retrying, based on the RetryFn and DelayFn functions passed to NewTransport. The package offers common delay strategies as ready-made functions that return a DelayFn: It also provides common retry helpers that return a RetryFn: Those can be combined with RetryAny or RetryAll as needed. RetryAny enables retries if any of the RetryFn return true, while RetryAll enables retries if all RetryFn return true. Typically, the RetryFn of the Transport should use at least RetryMaxRetries and some other retry condition(s), combined using RetryAll. By default, the Transport will buffer the request's body in order to be able to retry the request, as a request attempt will consume and close the existing body. Sometimes this is not desirable, so it can be prevented by setting PreventRetryWithBody to true on the Transport. Doing so will disable retries when a request has a non-nil body. This package requires Go version 1.6+, since it uses the new http.Request.Cancel field in order to cancel requests. It doesn't implement the deprecated http.Transport.CancelRequest method (https://golang.org/pkg/net/http/#Transport.CancelRequest). On Go1.7+, it uses the context returned by http.Request.Context to check for cancelled requests. Before Go1.7, PerAttemptTimeout has no effect. It should work on Go1.5, but only if there is no timeout set on the *http.Client. Go's stdlib will return an error on the first request if that's the case, because it requires a RoundTripper that implements the CancelRequest method.

Package apmchi provides middleware for the Chi router, for tracing HTTP requests.

Package vestigo implements a performant, stand-alone, HTTP compliant URL Router for go web applications. Vestigo utilizes a simple radix trie for url route indexing and search, and puts any URL parameters found in a request in the request's Form, much like PAT. Vestigo boasts standards compliance regarding the proper behavior when methods are not allowed on a given resource as well as when a resource isn't found. vestigo also includes built in CORS support on a global and per resource capability.

Package main ORY Oathkeeper ORY Oathkeeper is a reverse proxy that checks the HTTP Authorization for validity against a set of rules. This service uses Hydra to validate access tokens and policies. Schemes: http, https Host: BasePath: / Version: Latest Contact: ORY <hi@ory.am> https://www.ory.am Consumes: - application/json Produces: - application/json Extensions: --- x-request-id: string x-forwarded-proto: string --- swagger:meta

Package cmds helps building both standalone and client-server applications. The basic building blocks are requests, commands, emitters and responses. A command consists of a description of the parameters and a function. The function is passed the request as well as an emitter as arguments. It does operations on the inputs and sends the results to the user by emitting them. There are a number of emitters in this package and subpackages, but the user is free to create their own. A command is a struct containing the commands help text, a description of the arguments and options, the command's processing function and a type to let the caller know what type will be emitted. Optionally one of the functions PostRun and Encoder may be defined that consumes the function's emitted values and generates a visual representation for e.g. the terminal. Encoders work on a value-by-value basis, while PostRun operates on the value stream. An emitter has the Emit method, that takes the command's function's output as an argument and passes it to the user. The command's function does not know what kind of emitter it works with, so the same function may run locally or on a server, using an rpc interface. Emitters can also send errors using the SetError method. The user-facing emitter usually is the cli emitter. Values emitter here will be printed to the terminal using either the Encoders or the PostRun function. A response is a value that the user can read emitted values from. Responses have a method Next() that returns the next emitted value and an error value. If the last element has been received, the returned error value is io.EOF. If the application code has sent an error using SetError, the error ErrRcvdError is returned on next, indicating that the caller should call Error(). Depending on the reponse type, other errors may also occur. Pipes are pairs (emitter, response), such that a value emitted on the emitter can be received in the response value. Most builtin emitters are "pipe" emitters. The most prominent examples are the channel pipe and the http pipe. The channel pipe is backed by a channel. The only error value returned by the response is io.EOF, which happens when the channel is closed. The http pipe is backed by an http connection. The response can also return other errors, e.g. if there are errors on the network. To get a better idea of what's going on, take a look at the examples at https://github.com/ipfs/go-ipfs-cmds/tree/master/examples.

Pact Go enables consumer driven contract testing, providing a mock service and DSL for the consumer project, and interaction playback and verification for the service provider project. Consumer side Pact testing is an isolated test that ensures a given component is able to collaborate with another (remote) component. Pact will automatically start a Mock server in the background that will act as the collaborators' test double. This implies that any interactions expected on the Mock server will be validated, meaning a test will fail if all interactions were not completed, or if unexpected interactions were found: A typical consumer-side test would look something like this: If this test completed successfully, a Pact file should have been written to ./pacts/my_consumer-my_provider.json containing all of the interactions expected to occur between the Consumer and Provider. In addition to verbatim value matching, you have 3 useful matching functions in the `dsl` package that can increase expressiveness and reduce brittle test cases. Here is a complex example that shows how all 3 terms can be used together: This example will result in a response body from the mock server that looks like: See the examples in the dsl package and the matcher tests (https://github.com/pact-foundation/pact-go/v2/blob/master/dsl/matcher_test.go) for more matching examples. NOTE: You will need to use valid Ruby regular expressions (http://ruby-doc.org/core-2.1.5/Regexp.html) and double escape backslashes. Read more about flexible matching (https://github.com/pact-foundation/pact-ruby/wiki/Regular-expressions-and-type-matching-with-Pact. Provider side Pact testing, involves verifying that the contract - the Pact file - can be satisfied by the Provider. A typical Provider side test would like something like: The `VerifyProvider` will handle all verifications, treating them as subtests and giving you granular test reporting. If you don't like this behaviour, you may call `VerifyProviderRaw` directly and handle the errors manually. Note that `PactURLs` may be a list of local pact files or remote based urls (possibly from a Pact Broker - http://docs.pact.io/documentation/sharings_pacts.html). Pact reads the specified pact files (from remote or local sources) and replays the interactions against a running Provider. If all of the interactions are met we can say that both sides of the contract are satisfied and the test passes. When validating a Provider, you have 3 options to provide the Pact files: 1. Use "PactURLs" to specify the exact set of pacts to be replayed: Options 2 and 3 are particularly useful when you want to validate that your Provider is able to meet the contracts of what's in Production and also the latest in development. See this [article](http://rea.tech/enter-the-pact-matrix-or-how-to-decouple-the-release-cycles-of-your-microservices/) for more on this strategy. Each interaction in a pact should be verified in isolation, with no context maintained from the previous interactions. So how do you test a request that requires data to exist on the provider? Provider states are how you achieve this using Pact. Provider states also allow the consumer to make the same request with different expected responses (e.g. different response codes, or the same resource with a different subset of data). States are configured on the consumer side when you issue a dsl.Given() clause with a corresponding request/response pair. Configuring the provider is a little more involved, and (currently) requires running an API endpoint to configure any [provider states](http://docs.pact.io/documentation/provider_states.html) during the verification process. The option you must provide to the dsl.VerifyRequest is: An example route using the standard Go http package might look like this: See the examples or read more at http://docs.pact.io/documentation/provider_states.html. See the Pact Broker (http://docs.pact.io/documentation/sharings_pacts.html) documentation for more details on the Broker and this article (http://rea.tech/enter-the-pact-matrix-or-how-to-decouple-the-release-cycles-of-your-microservices/) on how to make it work for you. Publishing using Go code: Publishing from the CLI: Use a cURL request like the following to PUT the pact to the right location, specifying your consumer name, provider name and consumer version. The following flags are required to use basic authentication when publishing or retrieving Pact files to/from a Pact Broker: Pact Go uses a simple log utility (logutils - https://github.com/hashicorp/logutils) to filter log messages. The CLI already contains flags to manage this, should you want to control log level in your tests, you can set it like so:

Package restlayer is an API framework heavily inspired by the excellent Python Eve (http://python-eve.org/). It helps you create a comprehensive, customizable, and secure REST (graph) API on top of pluggable backend storages with no boiler plate code so can focus on your business logic. Implemented as a net/http middleware, it plays well with other middleware like CORS (http://github.com/rs/cors) and is net/context aware thanks to xhandler. REST Layer is an opinionated framework. Unlike many API frameworks, you don’t directly control the routing and you don’t have to write handlers. You just define resources and sub-resources with a schema, the framework automatically figures out what routes to generate behind the scene. You don’t have to take care of the HTTP headers and response, JSON encoding, etc. either. REST layer handles HTTP conditional requests, caching, integrity checking for you. A powerful and extensible validation engine make sure that data comes pre-validated to your custom storage handlers. Generic resource handlers for MongoDB (http://github.com/rs/rest-layer-mongo), ElasticSearch (http://github.com/rs/rest-layer-es) and other databases are also available so you have few to no code to write to make the whole system work. Moreover, REST Layer let you create a graph API by linking resources between them. Thanks to its advanced field selection syntax (and coming support of GraphQL), you can gather resources and their dependencies in a single request, saving you from costly network roundtrips. REST Layer is composed of several sub-packages: See https://github.com/rs/rest-layer/blob/master/README.md for full REST Layer documentation.

Package abstractions provides the base infrastructure for the Kiota-generated SDKs to function. It defines multiple concepts related to abstract HTTP requests, serialization, and authentication. These concepts can then be implemented independently without tying the SDKs to any specific implementation. Kiota also provides default implementations for these concepts. Checkout: - github.com/microsoft/kiota/authentication/go/azure - github.com/microsoft/kiota/http/go/nethttp - github.com/microsoft/kiota/serialization/go/json

Package nethttplibrary implements the Kiota abstractions with net/http to execute the requests. It also provides a middleware infrastructure with some default middleware handlers like the retry handler and the redirect handler.

Package circuit is a Go implementation of the circuit breaker pattern. Most documentation is available on the github README page https://github.com/cep21/circuit/blob/master/README.md Netflix describes most use cases on their wiki for Hystrix at https://github.com/Netflix/Hystrix/wiki. Quoting the wiki: It is a great library for microservice applications that require a large number of calls to many, small services where any one of these calls could fail, or any of these services could be down or degraded. The godoc contains many examples. Look at them for a good start on how to get started integrated and using the Hystrix library for Go. A circuits start Closed. The default logic is to open a circuit if more than 20 requests have come in during a 10 second window, and over 50% of requests during that 10 second window are failing. Once failed, the circuit waits 10 seconds before allowing a single request. If that request succeeds, then the circuit closes. If it fails, then the circuit waits another 10 seconds before allowing another request (and so on). Almost every part of this flow can be configured. See the CommandProperties struct for information. All circuits record circuit stats that you can fetch out of the Circuit at any time. In addition, you can also inject your own circuit stat trackers by modifying the MetricsCollectors structure. This is a full example of using a circuit around HTTP requests.

Package restful , a lean package for creating REST-style WebServices without magic. A WebService has a collection of Route objects that dispatch incoming Http Requests to a function calls. Typically, a WebService has a root path (e.g. /users) and defines common MIME types for its routes. WebServices must be added to a container (see below) in order to handler Http requests from a server. A Route is defined by a HTTP method, an URL path and (optionally) the MIME types it consumes (Content-Type) and produces (Accept). This package has the logic to find the best matching Route and if found, call its Function. The (*Request, *Response) arguments provide functions for reading information from the request and writing information back to the response. See the example https://github.com/emicklei/go-restful/blob/master/examples/restful-user-resource.go with a full implementation. A Route parameter can be specified using the format "uri/{var[:regexp]}" or the special version "uri/{var:*}" for matching the tail of the path. For example, /persons/{name:[A-Z][A-Z]} can be used to restrict values for the parameter "name" to only contain capital alphabetic characters. Regular expressions must use the standard Go syntax as described in the regexp package. (https://code.google.com/p/re2/wiki/Syntax) This feature requires the use of a CurlyRouter. A Container holds a collection of WebServices, Filters and a http.ServeMux for multiplexing http requests. Using the statements "restful.Add(...) and restful.Filter(...)" will register WebServices and Filters to the Default Container. The Default container of go-restful uses the http.DefaultServeMux. You can create your own Container and create a new http.Server for that particular container. A filter dynamically intercepts requests and responses to transform or use the information contained in the requests or responses. You can use filters to perform generic logging, measurement, authentication, redirect, set response headers etc. In the restful package there are three hooks into the request,response flow where filters can be added. Each filter must define a FilterFunction: Use the following statement to pass the request,response pair to the next filter or RouteFunction These are processed before any registered WebService. These are processed before any Route of a WebService. These are processed before calling the function associated with the Route. See the example https://github.com/emicklei/go-restful/blob/master/examples/restful-filters.go with full implementations. Two encodings are supported: gzip and deflate. To enable this for all responses: If a Http request includes the Accept-Encoding header then the response content will be compressed using the specified encoding. Alternatively, you can create a Filter that performs the encoding and install it per WebService or Route. See the example https://github.com/emicklei/go-restful/blob/master/examples/restful-encoding-filter.go By installing a pre-defined container filter, your Webservice(s) can respond to the OPTIONS Http request. By installing the filter of a CrossOriginResourceSharing (CORS), your WebService(s) can handle CORS requests. Unexpected things happen. If a request cannot be processed because of a failure, your service needs to tell via the response what happened and why. For this reason HTTP status codes exist and it is important to use the correct code in every exceptional situation. If path or query parameters are not valid (content or type) then use http.StatusBadRequest. Despite a valid URI, the resource requested may not be available If the application logic could not process the request (or write the response) then use http.StatusInternalServerError. The request has a valid URL but the method (GET,PUT,POST,...) is not allowed. The request does not have or has an unknown Accept Header set for this operation. The request does not have or has an unknown Content-Type Header set for this operation. In addition to setting the correct (error) Http status code, you can choose to write a ServiceError message on the response. This package has several options that affect the performance of your service. It is important to understand them and how you can change it. DoNotRecover controls whether panics will be caught to return HTTP 500. If set to false, the container will recover from panics. Default value is true If content encoding is enabled then the default strategy for getting new gzip/zlib writers and readers is to use a sync.Pool. Because writers are expensive structures, performance is even more improved when using a preloaded cache. You can also inject your own implementation. This package has the means to produce detail logging of the complete Http request matching process and filter invocation. Enabling this feature requires you to set an implementation of restful.StdLogger (e.g. log.Logger) instance such as: The restful.SetLogger() method allows you to override the logger used by the package. By default restful uses the standard library `log` package and logs to stdout. Different logging packages are supported as long as they conform to `StdLogger` interface defined in the `log` sub-package, writing an adapter for your preferred package is simple. (c) 2012-2015, http://ernestmicklei.com. MIT License

Implements HTTP request and response signing and verification. Supports the major MAC and asymmetric key signature algorithms. It has several safety restrictions: One, none of the widely known non-cryptographically safe algorithms are permitted; Two, the RSA SHA256 algorithms must be available in the binary (and it should, barring export restrictions); Finally, the library assumes either the 'Authorizationn' or 'Signature' headers are to be set (but not both).

Package iotdataplane provides the API client, operations, and parameter types for AWS IoT Data Plane. IoT data enables secure, bi-directional communication between Internet-connected things (such as sensors, actuators, embedded devices, or smart appliances) and the Amazon Web Services cloud. It implements a broker for applications and things to publish messages over HTTP (Publish) and retrieve, update, and delete shadows. A shadow is a persistent representation of your things and their state in the Amazon Web Services cloud. Find the endpoint address for actions in IoT data by running this CLI command: The service name used by Amazon Web ServicesSignature Version 4 to sign requests is: iotdevicegateway.

Package monkit is a flexible code instrumenting and data collection library. I'm going to try and sell you as fast as I can on this library. Example usage We've got tools that capture distribution information (including quantiles) about int64, float64, and bool types. We have tools that capture data about events (we've got meters for deltas, rates, etc). We have rich tools for capturing information about tasks and functions, and literally anything that can generate a name and a number. Almost just as importantly, the amount of boilerplate and code you have to write to get these features is very minimal. Data that's hard to measure probably won't get measured. This data can be collected and sent to Graphite (http://graphite.wikidot.com/) or any other time-series database. Here's a selection of live stats from one of our storage nodes: This library generates call graphs of your live process for you. These call graphs aren't created through sampling. They're full pictures of all of the interesting functions you've annotated, along with quantile information about their successes, failures, how often they panic, return an error (if so instrumented), how many are currently running, etc. The data can be returned in dot format, in json, in text, and can be about just the functions that are currently executing, or all the functions the monitoring system has ever seen. Here's another example of one of our production nodes: https://raw.githubusercontent.com/spacemonkeygo/monkit/master/images/callgraph2.png This library generates trace graphs of your live process for you directly, without requiring standing up some tracing system such as Zipkin (though you can do that too). Inspired by Google's Dapper (http://research.google.com/pubs/pub36356.html) and Twitter's Zipkin (http://zipkin.io), we have process-internal trace graphs, triggerable by a number of different methods. You get this trace information for free whenever you use Go contexts (https://blog.golang.org/context) and function monitoring. The output formats are svg and json. Additionally, the library supports trace observation plugins, and we've written a plugin that sends this data to Zipkin (http://github.com/spacemonkeygo/monkit-zipkin). https://raw.githubusercontent.com/spacemonkeygo/monkit/master/images/trace.png Before our crazy Go rewrite of everything (https://www.spacemonkey.com/blog/posts/go-space-monkey) (and before we had even seen Google's Dapper paper), we were a Python shop, and all of our "interesting" functions were decorated with a helper that collected timing information and sent it to Graphite. When we transliterated to Go, we wanted to preserve that functionality, so the first version of our monitoring package was born. Over time it started to get janky, especially as we found Zipkin and started adding tracing functionality to it. We rewrote all of our Go code to use Google contexts, and then realized we could get call graph information. We decided a refactor and then an all-out rethinking of our monitoring package was best, and so now we have this library. Sometimes you really want callstack contextual information without having to pass arguments through everything on the call stack. In other languages, many people implement this with thread-local storage. Example: let's say you have written a big system that responds to user requests. All of your libraries log using your log library. During initial development everything is easy to debug, since there's low user load, but now you've scaled and there's OVER TEN USERS and it's kind of hard to tell what log lines were caused by what. Wouldn't it be nice to add request ids to all of the log lines kicked off by that request? Then you could grep for all log lines caused by a specific request id. Geez, it would suck to have to pass all contextual debugging information through all of your callsites. Google solved this problem by always passing a context.Context interface through from call to call. A Context is basically just a mapping of arbitrary keys to arbitrary values that users can add new values for. This way if you decide to add a request context, you can add it to your Context and then all callsites that decend from that place will have the new data in their contexts. It is admittedly very verbose to add contexts to every function call. Painfully so. I hope to write more about it in the future, but Google also wrote up their thoughts about it (https://blog.golang.org/context), which you can go read. For now, just swallow your disgust and let's keep moving. Let's make a super simple Varnish (https://www.varnish-cache.org/) clone. Open up gedit! (Okay just kidding, open whatever text editor you want.) For this motivating program, we won't even add the caching, though there's comments for where to add it if you'd like. For now, let's just make a barebones system that will proxy HTTP requests. We'll call it VLite, but maybe we should call it VReallyLite. Run and build this and open localhost:8080 in your browser. If you use the default proxy target, it should inform you that the world hasn't been destroyed yet. The first thing you'll want to do is add the small amount of boilerplate to make the instrumentation we're going to add to your process observable later. Import the basic monkit packages: and then register environmental statistics and kick off a goroutine in your main method to serve debug requests: Rebuild, and then check out localhost:9000/stats (or localhost:9000/stats/json, if you prefer) in your browser! Remember what I said about Google's contexts (https://blog.golang.org/context)? It might seem a bit overkill for such a small project, but it's time to add them. To help out here, I've created a library that constructs contexts for you for incoming HTTP requests. Nothing that's about to happen requires my webhelp library (https://godoc.org/github.com/jtolds/webhelp), but here is the code now refactored to receive and pass contexts through our two per-request calls. You can create a new context for a request however you want. One reason to use something like webhelp is that the cancelation feature of Contexts is hooked up to the HTTP request getting canceled. Let's start to get statistics about how many requests we receive! First, this package (main) will need to get a monitoring Scope. Add this global definition right after all your imports, much like you'd create a logger with many logging libraries: Now, make the error return value of HandleHTTP named (so, (err error)), and add this defer line as the very first instruction of HandleHTTP: Let's also add the same line (albeit modified for the lack of error) to Proxy, replacing &err with nil: You should now have something like: We'll unpack what's going on here, but for now: For this new funcs dataset, if you want a graph, you can download a dot graph at localhost:9000/funcs/dot and json information from localhost:9000/funcs/json. You should see something like: with a similar report for the Proxy method, or a graph like: https://raw.githubusercontent.com/spacemonkeygo/monkit/master/images/handlehttp.png This data reports the overall callgraph of execution for known traces, along with how many of each function are currently running, the most running concurrently (the highwater), how many were successful along with quantile timing information, how many errors there were (with quantile timing information if applicable), and how many panics there were. Since the Proxy method isn't capturing a returned err value, and since HandleHTTP always returns nil, this example won't ever have failures. If you're wondering about the success count being higher than you expected, keep in mind your browser probably requested a favicon.ico. Cool, eh? How it works is an interesting line of code - there's three function calls. If you look at the Go spec, all of the function calls will run at the time the function starts except for the very last one. The first function call, mon.Task(), creates or looks up a wrapper around a Func. You could get this yourself by requesting mon.Func() inside of the appropriate function or mon.FuncNamed(). Both mon.Task() and mon.Func() are inspecting runtime.Caller to determine the name of the function. Because this is a heavy operation, you can actually store the result of mon.Task() and reuse it somehow else if you prefer, so instead of you could instead use which is more performant every time after the first time. runtime.Caller only gets called once. Careful! Don't use the same myFuncMon in different functions unless you want to screw up your statistics! The second function call starts all the various stop watches and bookkeeping to keep track of the function. It also mutates the context pointer it's given to extend the context with information about what current span (in Zipkin parlance) is active. Notably, you *can* pass nil for the context if you really don't want a context. You just lose callgraph information. The last function call stops all the stop watches ad makes a note of any observed errors or panics (it repanics after observing them). Turns out, we don't even need to change our program anymore to get rich tracing information! Open your browser and go to localhost:9000/trace/svg?regex=HandleHTTP. It won't load, and in fact, it's waiting for you to open another tab and refresh localhost:8080 again. Once you retrigger the actual application behavior, the trace regex will capture a trace starting on the first function that matches the supplied regex, and return an svg. Go back to your first tab, and you should see a relatively uninteresting but super promising svg. Let's make the trace more interesting. Add a to your HandleHTTP method, rebuild, and restart. Load localhost:8080, then start a new request to your trace URL, then reload localhost:8080 again. Flip back to your trace, and you should see that the Proxy method only takes a portion of the time of HandleHTTP! https://cdn.rawgit.com/spacemonkeygo/monkit/master/images/trace.svg There's multiple ways to select a trace. You can select by regex using the preselect method (default), which first evaluates the regex on all known functions for sanity checking. Sometimes, however, the function you want to trace may not yet be known to monkit, in which case you'll want to turn preselection off. You may have a bad regex, or you may be in this case if you get the error "Bad Request: regex preselect matches 0 functions." Another way to select a trace is by providing a trace id, which we'll get to next! Make sure to check out what the addition of the time.Sleep call did to the other reports. It's easy to write plugins for monkit! Check out our first one that exports data to Zipkin (http://zipkin.io/)'s Scribe API: https://github.com/spacemonkeygo/monkit-zipkin We plan to have more (for HTrace, OpenTracing, etc, etc), soon!

Package fetchbot provides a simple and flexible web crawler that follows the robots.txt policies and crawl delays. It is very much a rewrite of gocrawl (https://github.com/PuerkitoBio/gocrawl) with a simpler API, less features built-in, but at the same time more flexibility. As for Go itself, sometimes less is more! To install, simply run in a terminal: The package has a single external dependency, robotstxt (https://github.com/temoto/robotstxt). It also integrates code from the iq package (https://github.com/kylelemons/iq). The API documentation is available on godoc.org (http://godoc.org/github.com/PuerkitoBio/fetchbot). The following example (taken from /example/short/main.go) shows how to create and start a Fetcher, one way to send commands, and how to stop the fetcher once all commands have been handled. A more complex and complete example can be found in the repository, at /example/full/. Basically, a Fetcher is an instance of a web crawler, independent of other Fetchers. It receives Commands via the Queue, executes the requests, and calls a Handler to process the responses. A Command is an interface that tells the Fetcher which URL to fetch, and which HTTP method to use (i.e. "GET", "HEAD", ...). A call to Fetcher.Start() returns the Queue associated with this Fetcher. This is the thread-safe object that can be used to send commands, or to stop the crawler. Both the Command and the Handler are interfaces, and may be implemented in various ways. They are defined like so: A Context is a struct that holds the Command and the Queue, so that the Handler always knows which Command initiated this call, and has a handle to the Queue. A Handler is similar to the net/http Handler, and middleware-style combinations can be built on top of it. A HandlerFunc type is provided so that simple functions with the right signature can be used as Handlers (like net/http.HandlerFunc), and there is also a multiplexer Mux that can be used to dispatch calls to different Handlers based on some criteria. The Fetcher recognizes a number of interfaces that the Command may implement, for more advanced needs. * BasicAuthProvider: Implement this interface to specify the basic authentication credentials to set on the request. * CookiesProvider: If the Command implements this interface, the provided Cookies will be set on the request. * HeaderProvider: Implement this interface to specify the headers to set on the request. * ReaderProvider: Implement this interface to set the body of the request, via an io.Reader. * ValuesProvider: Implement this interface to set the body of the request, as form-encoded values. If the Content-Type is not specifically set via a HeaderProvider, it is set to "application/x-www-form-urlencoded". ReaderProvider and ValuesProvider should be mutually exclusive as they both set the body of the request. If both are implemented, the ReaderProvider interface is used. * Handler: Implement this interface if the Command's response should be handled by a specific callback function. By default, the response is handled by the Fetcher's Handler, but if the Command implements this, this handler function takes precedence and the Fetcher's Handler is ignored. Since the Command is an interface, it can be a custom struct that holds additional information, such as an ID for the URL (e.g. from a database), or a depth counter so that the crawling stops at a certain depth, etc. For basic commands that don't require additional information, the package provides the Cmd struct that implements the Command interface. This is the Command implementation used when using the various Queue.SendString\* methods. There is also a convenience HandlerCmd struct for the commands that should be handled by a specific callback function. It is a Command with a Handler interface implementation. The Fetcher has a number of fields that provide further customization: * HttpClient : By default, the Fetcher uses the net/http default Client to make requests. A different client can be set on the Fetcher.HttpClient field. * CrawlDelay : That value is used only if there is no delay specified by the robots.txt of a given host. * UserAgent : Sets the user agent string to use for the requests and to validate against the robots.txt entries. * WorkerIdleTTL : Sets the duration that a worker goroutine can wait without receiving new commands to fetch. If the idle time-to-live is reached, the worker goroutine is stopped and its resources are released. This can be especially useful for long-running crawlers. * AutoClose : If true, closes the queue automatically once the number of active hosts reach 0. * DisablePoliteness : If true, ignores the robots.txt policies of the hosts. What fetchbot doesn't do - especially compared to gocrawl - is that it doesn't keep track of already visited URLs, and it doesn't normalize the URLs. This is outside the scope of this package - all commands sent on the Queue will be fetched. Normalization can easily be done (e.g. using https://github.com/PuerkitoBio/purell) before sending the Command to the Fetcher. How to keep track of visited URLs depends on the use-case of the specific crawler, but for an example, see /example/full/main.go. The BSD 3-Clause license (http://opensource.org/licenses/BSD-3-Clause), the same as the Go language. The iq_slice.go file is under the CDDL-1.0 license (details in the source file).

This is the official Go SDK for Oracle Cloud Infrastructure Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#installing for installation instructions. Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring for configuration instructions. The following example shows how to get started with the SDK. The example belows creates an identityClient struct with the default configuration. It then utilizes the identityClient to list availability domains and prints them out to stdout More examples can be found in the SDK Github repo: https://github.com/oracle/oci-go-sdk/tree/master/example Optional fields are represented with the `mandatory:"false"` tag on input structs. The SDK will omit all optional fields that are nil when making requests. In the case of enum-type fields, the SDK will omit fields whose value is an empty string. The SDK uses pointers for primitive types in many input structs. To aid in the construction of such structs, the SDK provides functions that return a pointer for a given value. For example: The SDK exposes functionality that allows the user to customize any http request before is sent to the service. You can do so by setting the `Interceptor` field in any of the `Client` structs. For example: The Interceptor closure gets called before the signing process, thus any changes done to the request will be properly signed and submitted to the service. The SDK exposes a stand-alone signer that can be used to signing custom requests. Related code can be found here: https://github.com/oracle/oci-go-sdk/blob/master/common/http_signer.go. The example below shows how to create a default signer. The signer also allows more granular control on the headers used for signing. For example: You can combine a custom signer with the exposed clients in the SDK. This allows you to add custom signed headers to the request. Following is an example: Bear in mind that some services have a white list of headers that it expects to be signed. Therefore, adding an arbitrary header can result in authentications errors. To see a runnable example, see https://github.com/oracle/oci-go-sdk/blob/master/example/example_identity_test.go For more information on the signing algorithm refer to: https://docs.cloud.oracle.com/Content/API/Concepts/signingrequests.htm Some operations accept or return polymorphic JSON objects. The SDK models such objects as interfaces. Further the SDK provides structs that implement such interfaces. Thus, for all operations that expect interfaces as input, pass the struct in the SDK that satisfies such interface. For example: In the case of a polymorphic response you can type assert the interface to the expected type. For example: An example of polymorphic JSON request handling can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_test.go#L63 When calling a list operation, the operation will retrieve a page of results. To retrieve more data, call the list operation again, passing in the value of the most recent response's OpcNextPage as the value of Page in the next list operation call. When there is no more data the OpcNextPage field will be nil. An example of pagination using this logic can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_pagination_test.go The SDK has a built-in logging mechanism used internally. The internal logging logic is used to record the raw http requests, responses and potential errors when (un)marshalling request and responses. Built-in logging in the SDK is controlled via the environment variable "OCI_GO_SDK_DEBUG" and its contents. The below are possible values for the "OCI_GO_SDK_DEBUG" variable 1. "info" or "i" enables all info logging messages 2. "debug" or "d" enables all debug and info logging messages 3. "verbose" or "v" or "1" enables all verbose, debug and info logging messages 4. "null" turns all logging messages off. If the value of the environment variable does not match any of the above then default logging level is "info". If the environment variable is not present then no logging messages are emitted. The default destination for logging is Stderr and if you want to output log to a file you can set via environment variable "OCI_GO_SDK_LOG_OUTPUT_MODE". The below are possible values 1. "file" or "f" enables all logging output saved to file 2. "combine" or "c" enables all logging output to both stderr and file You can also customize the log file location and name via "OCI_GO_SDK_LOG_FILE" environment variable, the value should be the path to a specific file If this environment variable is not present, the default location will be the project root path Sometimes you may need to wait until an attribute of a resource, such as an instance or a VCN, reaches a certain state. An example of this would be launching an instance and then waiting for the instance to become available, or waiting until a subnet in a VCN has been terminated. You might also want to retry the same operation again if there's network issue etc... This can be accomplished by using the RequestMetadata.RetryPolicy(request level configuration), alternatively, global(all services) or client level RetryPolicy configration is also possible. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_retry_test.go If you are trying to make a PUT/POST API call with binary request body, please make sure the binary request body is resettable, which means the request body should inherit Seeker interface. The Retry behavior Precedence (Highest to lowest) is defined as below:- The OCI Go SDK defines a default retry policy that retries on the errors suitable for retries (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm), for a recommended period of time (up to 7 attempts spread out over at most approximately 1.5 minutes). The default retry policy is defined by : Default Retry-able Errors Below is the list of default retry-able errors for which retry attempts should be made. The following errors should be retried (with backoff). HTTP Code Customer-facing Error Code Apart from the above errors, retries should also be attempted in the following Client Side errors : 1. HTTP Connection timeout 2. Request Connection Errors 3. Request Exceptions 4. Other timeouts (like Read Timeout) The above errors can be avoided through retrying and hence, are classified as the default retry-able errors. Additionally, retries should also be made for Circuit Breaker exceptions (Exceptions raised by Circuit Breaker in an open state) Default Termination Strategy The termination strategy defines when SDKs should stop attempting to retry. In other words, it's the deadline for retries. The OCI SDKs should stop retrying the operation after 7 retry attempts. This means the SDKs will have retried for ~98 seconds or ~1.5 minutes have elapsed due to total delays. SDKs will make a total of 8 attempts. (1 initial request + 7 retries) Default Delay Strategy Default Delay Strategy - The delay strategy defines the amount of time to wait between each of the retry attempts. The default delay strategy chosen for the SDK – Exponential backoff with jitter, using: 1. The base time to use in retry calculations will be 1 second 2. An exponent of 2. When calculating the next retry time, the SDK will raise this to the power of the number of attempts 3. A maximum wait time between calls of 30 seconds (Capped) 4. Added jitter value between 0-1000 milliseconds to spread out the requests Configure and use default retry policy You can set this retry policy for a single request: or for all requests made by a client: or for all requests made by all clients: or setting default retry via environment varaible, which is a global switch for all services: Some services enable retry for operations by default, this can be overridden using any alternatives mentioned above. To know which service operations have retries enabled by default, look at the operation's description in the SDK - it will say whether that it has retries enabled by default Some resources may have to be replicated across regions and are only eventually consistent. That means the request to create, update, or delete the resource succeeded, but the resource is not available everywhere immediately. Creating, updating, or deleting any resource in the Identity service is affected by eventual consistency, and doing so may cause other operations in other services to fail until the Identity resource has been replicated. For example, the request to CreateTag in the Identity service in the home region succeeds, but immediately using that created tag in another region in a request to LaunchInstance in the Compute service may fail. If you are creating, updating, or deleting resources in the Identity service, we recommend using an eventually consistent retry policy for any service you access. The default retry policy already deals with eventual consistency. Example: This retry policy will use a different strategy if an eventually consistent change was made in the recent past (called the "eventually consistent window", currently defined to be 4 minutes after the eventually consistent change). This special retry policy for eventual consistency will: 1. make up to 9 attempts (including the initial attempt); if an attempt is successful, no more attempts will be made 2. retry at most until (a) approximately the end of the eventually consistent window or (b) the end of the default retry period of about 1.5 minutes, whichever is farther in the future; if an attempt is successful, no more attempts will be made, and the OCI Go SDK will not wait any longer 3. retry on the error codes 400-RelatedResourceNotAuthorizedOrNotFound, 404-NotAuthorizedOrNotFound, and 409-NotAuthorizedOrResourceAlreadyExists, for which the default retry policy does not retry, in addition to the errors the default retry policy retries on (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm) If there were no eventually consistent actions within the recent past, then this special retry strategy is not used. If you want a retry policy that does not handle eventual consistency in a special way, for example because you retry on all error responses, you can use DefaultRetryPolicyWithoutEventualConsistency or NewRetryPolicyWithOptions with the common.ReplaceWithValuesFromRetryPolicy(common.DefaultRetryPolicyWithoutEventualConsistency()) option: The NewRetryPolicy function also creates a retry policy without eventual consistency. Circuit Breaker can prevent an application repeatedly trying to execute an operation that is likely to fail, allowing it to continue without waiting for the fault to be rectified or wasting CPU cycles, of course, it also enables an application to detect whether the fault has been resolved. If the problem appears to have been rectified, the application can attempt to invoke the operation. Go SDK intergrates sony/gobreaker solution, wraps in a circuit breaker object, which monitors for failures. Once the failures reach a certain threshold, the circuit breaker trips, and all further calls to the circuit breaker return with an error, this also saves the service from being overwhelmed with network calls in case of an outage. Circuit Breaker Configuration Definitions 1. Failure Rate Threshold - The state of the CircuitBreaker changes from CLOSED to OPEN when the failure rate is equal or greater than a configurable threshold. For example when more than 50% of the recorded calls have failed. 2. Reset Timeout - The timeout after which an open circuit breaker will attempt a request if a request is made 3. Failure Exceptions - The list of Exceptions that will be regarded as failures for the circuit. 4. Minimum number of calls/ Volume threshold - Configures the minimum number of calls which are required (per sliding window period) before the CircuitBreaker can calculate the error rate. 1. Failure Rate Threshold - 80% - This means when 80% of the requests calculated for a time window of 120 seconds have failed then the circuit will transition from closed to open. 2. Minimum number of calls/ Volume threshold - A value of 10, for the above defined time window of 120 seconds. 3. Reset Timeout - 30 seconds to wait before setting the breaker to halfOpen state, and trying the action again. 4. Failure Exceptions - The failures for the circuit will only be recorded for the retryable/transient exceptions. This means only the following exceptions will be regarded as failure for the circuit. HTTP Code Customer-facing Error Code Apart from the above, the following client side exceptions will also be treated as a failure for the circuit : 1. HTTP Connection timeout 2. Request Connection Errors 3. Request Exceptions 4. Other timeouts (like Read Timeout) Go SDK enable circuit breaker with default configuration for most of the service clients, if you don't want to enable the solution, can disable the functionality before your application running Go SDK also supports customize Circuit Breaker with specified configurations. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_circuitbreaker_test.go To know which service clients have circuit breakers enabled, look at the service client's description in the SDK - it will say whether that it has circuit breakers enabled by default The GO SDK uses the net/http package to make calls to OCI services. If your environment requires you to use a proxy server for outgoing HTTP requests then you can set this up in the following ways: 1. Configuring environment variable as described here https://golang.org/pkg/net/http/#ProxyFromEnvironment 2. Modifying the underlying Transport struct for a service client In order to modify the underlying Transport struct in HttpClient, you can do something similar to (sample code for audit service client): The Object Storage service supports multipart uploads to make large object uploads easier by splitting the large object into parts. The Go SDK supports raw multipart upload operations for advanced use cases, as well as a higher level upload class that uses the multipart upload APIs. For links to the APIs used for multipart upload operations, see Managing Multipart Uploads (https://docs.cloud.oracle.com/iaas/Content/Object/Tasks/usingmultipartuploads.htm). Higher level multipart uploads are implemented using the UploadManager, which will: split a large object into parts for you, upload the parts in parallel, and then recombine and commit the parts as a single object in storage. This code sample shows how to use the UploadManager to automatically split an object into parts for upload to simplify interaction with the Object Storage service: https://github.com/oracle/oci-go-sdk/blob/master/example/example_objectstorage_test.go Some response fields are enum-typed. In the future, individual services may return values not covered by existing enums for that field. To address this possibility, every enum-type response field is a modeled as a type that supports any string. Thus if a service returns a value that is not recognized by your version of the SDK, then the response field will be set to this value. When individual services return a polymorphic JSON response not available as a concrete struct, the SDK will return an implementation that only satisfies the interface modeling the polymorphic JSON response. If you are using a version of the SDK released prior to the announcement of a new region, you may need to use a workaround to reach it, depending on whether the region is in the oraclecloud.com realm. A region is a localized geographic area. For more information on regions and how to identify them, see Regions and Availability Domains(https://docs.cloud.oracle.com/iaas/Content/General/Concepts/regions.htm). A realm is a set of regions that share entities. You can identify your realm by looking at the domain name at the end of the network address. For example, the realm for xyz.abc.123.oraclecloud.com is oraclecloud.com. oraclecloud.com Realm: For regions in the oraclecloud.com realm, even if common.Region does not contain the new region, the forward compatibility of the SDK can automatically handle it. You can pass new region names just as you would pass ones that are already defined. For more information on passing region names in the configuration, see Configuring (https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring). For details on common.Region, see (https://github.com/oracle/oci-go-sdk/blob/master/common/common.go). Other Realms: For regions in realms other than oraclecloud.com, you can use the following workarounds to reach new regions with earlier versions of the SDK. NOTE: Be sure to supply the appropriate endpoints for your region. You can overwrite the target host with client.Host: If you are authenticating via instance principals, you can set the authentication endpoint in an environment variable: Got a fix for a bug, or a new feature you'd like to contribute? The SDK is open source and accepting pull requests on GitHub https://github.com/oracle/oci-go-sdk Licensing information available at: https://github.com/oracle/oci-go-sdk/blob/master/LICENSE.txt To be notified when a new version of the Go SDK is released, subscribe to the following feed: https://github.com/oracle/oci-go-sdk/releases.atom Please refer to this link: https://github.com/oracle/oci-go-sdk#help

Package vulcain helps implementing the Vulcain protocol (https://vulcain.rocks) in Go projects. It provides helper functions to parse HTTP requests containing "preload" and "fields" directives, to extract and push the relations of a JSON document matched by the "preload" directive, and to modify the JSON document according to both directives. This package can be used in any HTTP handler as well as with httputil.ReverseProxy.

Package p2phttp allows to serve HTTP endpoints and make HTTP requests through LibP2P (https://github.com/libp2p/libp2p) using Go's standard "http" and "net" stacks. Instead of the regular "host:port" addressing, `p2phttp` uses a Peer ID and lets LibP2P take care of the routing, thus taking advantage of features like multi-routes, NAT transversal and stream multiplexing over a single connection. When already running a LibP2P facility, this package allows to expose existing HTTP-based services (like REST APIs) through LibP2P and to use those services with minimal changes to the code-base. For example, a simple http.Server on LibP2P works as: As shown above, a Server only needs a "github.com/libp2p/go-libp2p-gostream" listener. This listener will use a libP2P host to watch for stream tagged with our Protocol. On the other side, a client just needs to be initialized with a custom LibP2P host-based transport to perform requests to such server: In the example above, the client registers a "libp2p" protocol for which the custom transport is used. It can still perform regular "http" requests. The protocol name used is arbitraty and non standard. Note that LibP2P hosts cannot dial to themselves, so there is no possibility of using the same host as server and as client.

Copyright 2019 The Go Authors. All rights reserved. Use of this source code is governed by a BSD-style license that can be found in the LICENSE file. Usage: goproxy serves the Go module proxy HTTP protocol at the given address (default 0.0.0.0:8081). It invokes the local go command to answer requests and therefore reuses the current GOPATH's module download cache and configuration (GOPROXY, GOSUMDB, and so on). While the proxy is running, setting GOPROXY=http://host:port will instruct the go command to use it. Note that the module proxy cannot share a GOPATH with its own clients or else fetches will deadlock. (The client will lock the entry as “being downloaded” before sending the request to the proxy, which will then wait for the apparently-in-progress download to finish.)

Package grpchan provides an abstraction for a gRPC transport, called a Channel. The channel is more general than the concrete *grpc.ClientConn and *grpc.Server types provided by gRPC. It allows gRPC over alternate substrates and includes sub-packages that provide two such alternatives: in-process and HTTP 1.1. The key type in this package is an alternate implementation of grpc.ServiceRegistrar interface that allows you to accumulate service registrations, for use with an implementation other than *grpc.Server. This repo also includes a deprecated protoc plugin. This is no longer needed now that the standard protoc-gen-go-grpc plugin generates code that uses interfaces: grpc.ClientConnInterface and grpc.ServiceRegistrar. In older versions, the generated code only supported concrete types (*grpc.ClientConn and *grpc.Server) so this repo's protoc plugin would generate alternate code that used interfaces (and thus supported other concrete implementations). Continued use of the plugin is only to continue supporting code that uses the functions generated by it. To use the protoc plugin, you need to first build it and make sure its location is in your PATH. When you invoke protoc, include a --grpchan_out parameter that indicates the same output directory as used for your --go_out parameter. Alongside the *.pb.go files generated, the grpchan plugin will also create *.pb.grpchan.go files. In older versions of the Go plugin (when emitting gRPC code), a server registration function for each RPC service defined in the proto source files was generated that looked like so: The grpchan plugin produces a similarly named method that accepts the ServiceRegistry interface: A new transport can then be implemented by just implementing two interfaces: grpc.ClientConnInterface for the client side and grpchan.ServiceRegistry for the server side. The alternate method also works just fine with *grpc.Server as it implements the ServiceRegistry interface. NOTE: If your have code relying on New<ServiceName>ChannelClient methods that earlier versions of this package produced, they can still be generated by passing a "legacy_stubs" option to the plugin. Example: The client-side implementation of a transport is done with just the two methods in grpc.ClientConnInterface: one for unary RPCs and the other for streaming RPCs. Note that when a unary interceptor is invoked for an RPC on a channel that is *not* a *grpc.ClientConn, the parameter of that type will be nil. Not all client call options will make sense for all transports. This repo chooses to ignore call options that do not apply (as opposed to failing the RPC or panicking). However, several call options are likely important to support: those for accessing header and trailer metadata. The peer, per-RPC credentials, and message size limits are other options that are reasonably straight-forward to apply to other transports. But the other options (dealing with on-the-wire encoding, compression, etc) may not be applicable. The server-side implementation of a transport must be able to invoke method and stream handlers for a given service implementation. This is done by implementing the grpc.ServiceRegistrar interface. When a service is registered, a service description is provided that includes access to method and stream handlers. When the transport receives requests for RPC operations, it in turn invokes these handlers. For streaming operations, it must also supply a grpc.ServerStream implementation, for exchanging messages on the stream. Note that the server stream's context will need a custom implementation of the grpc.ServerTransportStream in it, too. Sadly, this interface is just different enough from grpc.ServerStream that they cannot be implemented by the same type. This is particularly necessary for unary calls since this is how a unary handler indicates what headers and trailers to send back to the client.

This is the official Go SDK for Oracle Cloud Infrastructure Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#installing for installation instructions. Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring for configuration instructions. The following example shows how to get started with the SDK. The example belows creates an identityClient struct with the default configuration. It then utilizes the identityClient to list availability domains and prints them out to stdout More examples can be found in the SDK Github repo: https://github.com/oracle/oci-go-sdk/tree/master/example Optional fields are represented with the `mandatory:"false"` tag on input structs. The SDK will omit all optional fields that are nil when making requests. In the case of enum-type fields, the SDK will omit fields whose value is an empty string. The SDK uses pointers for primitive types in many input structs. To aid in the construction of such structs, the SDK provides functions that return a pointer for a given value. For example: The SDK exposes functionality that allows the user to customize any http request before is sent to the service. You can do so by setting the `Interceptor` field in any of the `Client` structs. For example: The Interceptor closure gets called before the signing process, thus any changes done to the request will be properly signed and submitted to the service. The SDK exposes a stand-alone signer that can be used to signing custom requests. Related code can be found here: https://github.com/oracle/oci-go-sdk/blob/master/common/http_signer.go. The example below shows how to create a default signer. The signer also allows more granular control on the headers used for signing. For example: You can combine a custom signer with the exposed clients in the SDK. This allows you to add custom signed headers to the request. Following is an example: Bear in mind that some services have a white list of headers that it expects to be signed. Therefore, adding an arbitrary header can result in authentications errors. To see a runnable example, see https://github.com/oracle/oci-go-sdk/blob/master/example/example_identity_test.go For more information on the signing algorithm refer to: https://docs.cloud.oracle.com/Content/API/Concepts/signingrequests.htm Some operations accept or return polymorphic JSON objects. The SDK models such objects as interfaces. Further the SDK provides structs that implement such interfaces. Thus, for all operations that expect interfaces as input, pass the struct in the SDK that satisfies such interface. For example: In the case of a polymorphic response you can type assert the interface to the expected type. For example: An example of polymorphic JSON request handling can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_test.go#L63 When calling a list operation, the operation will retrieve a page of results. To retrieve more data, call the list operation again, passing in the value of the most recent response's OpcNextPage as the value of Page in the next list operation call. When there is no more data the OpcNextPage field will be nil. An example of pagination using this logic can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_pagination_test.go The SDK has a built-in logging mechanism used internally. The internal logging logic is used to record the raw http requests, responses and potential errors when (un)marshalling request and responses. Built-in logging in the SDK is controlled via the environment variable "OCI_GO_SDK_DEBUG" and its contents. The below are possible values for the "OCI_GO_SDK_DEBUG" variable 1. "info" or "i" enables all info logging messages 2. "debug" or "d" enables all debug and info logging messages 3. "verbose" or "v" or "1" enables all verbose, debug and info logging messages 4. "null" turns all logging messages off. If the value of the environment variable does not match any of the above then default logging level is "info". If the environment variable is not present then no logging messages are emitted. The default destination for logging is Stderr and if you want to output log to a file you can set via environment variable "OCI_GO_SDK_LOG_OUTPUT_MODE". The below are possible values 1. "file" or "f" enables all logging output saved to file 2. "combine" or "c" enables all logging output to both stderr and file You can also customize the log file location and name via "OCI_GO_SDK_LOG_FILE" environment variable, the value should be the path to a specific file If this environment variable is not present, the default location will be the project root path Sometimes you may need to wait until an attribute of a resource, such as an instance or a VCN, reaches a certain state. An example of this would be launching an instance and then waiting for the instance to become available, or waiting until a subnet in a VCN has been terminated. You might also want to retry the same operation again if there's network issue etc... This can be accomplished by using the RequestMetadata.RetryPolicy(request level configuration), alternatively, global(all services) or client level RetryPolicy configration is also possible. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_retry_test.go If you are trying to make a PUT/POST API call with binary request body, please make sure the binary request body is resettable, which means the request body should inherit Seeker interface. The Retry behavior Precedence (Highest to lowest) is defined as below:- The OCI Go SDK defines a default retry policy that retries on the errors suitable for retries (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm), for a recommended period of time (up to 7 attempts spread out over at most approximately 1.5 minutes). This default retry policy can be created using: You can set this retry policy for a single request: or for all requests made by a client: or for all requests made by all clients: or setting default retry via environment varaible, which is a global switch for all services: Some services enable retry for operations by default, this can be overridden using any alternatives mentioned above. Some resources may have to be replicated across regions and are only eventually consistent. That means the request to create, update, or delete the resource succeeded, but the resource is not available everywhere immediately. Creating, updating, or deleting any resource in the Identity service is affected by eventual consistency, and doing so may cause other operations in other services to fail until the Identity resource has been replicated. For example, the request to CreateTag in the Identity service in the home region succeeds, but immediately using that created tag in another region in a request to LaunchInstance in the Compute service may fail. If you are creating, updating, or deleting resources in the Identity service, we recommend using an eventually consistent retry policy for any service you access. The default retry policy already deals with eventual consistency. Example: This retry policy will use a different strategy if an eventually consistent change was made in the recent past (called the "eventually consistent window", currently defined to be 4 minutes after the eventually consistent change). This special retry policy for eventual consistency will: 1. make up to 9 attempts (including the initial attempt); if an attempt is successful, no more attempts will be made 2. retry at most until (a) approximately the end of the eventually consistent window or (b) the end of the default retry period of about 1.5 minutes, whichever is farther in the future; if an attempt is successful, no more attempts will be made, and the OCI Go SDK will not wait any longer 3. retry on the error codes 400-RelatedResourceNotAuthorizedOrNotFound, 404-NotAuthorizedOrNotFound, and 409-NotAuthorizedOrResourceAlreadyExists, for which the default retry policy does not retry, in addition to the errors the default retry policy retries on (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm) If there were no eventually consistent actions within the recent past, then this special retry strategy is not used. If you want a retry policy that does not handle eventual consistency in a special way, for example because you retry on all error responses, you can use DefaultRetryPolicyWithoutEventualConsistency or NewRetryPolicyWithOptions with the common.ReplaceWithValuesFromRetryPolicy(common.DefaultRetryPolicyWithoutEventualConsistency()) option: The NewRetryPolicy function also creates a retry policy without eventual consistency. Circuit Breaker can prevent an application repeatedly trying to execute an operation that is likely to fail, allowing it to continue without waiting for the fault to be rectified or wasting CPU cycles, of course, it also enables an application to detect whether the fault has been resolved. If the problem appears to have been rectified, the application can attempt to invoke the operation. Go SDK intergrates sony/gobreaker solution, wraps in a circuit breaker object, which monitors for failures. Once the failures reach a certain threshold, the circuit breaker trips, and all further calls to the circuit breaker return with an error, this also saves the service from being overwhelmed with network calls in case of an outage. Go SDK enable circuit breaker with default configuration, if you don't want to enable the solution, can disable the functionality before your application running Go SDK also supports customize Circuit Breaker with specified configuratoins. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_circuitbreaker_test.go The GO SDK uses the net/http package to make calls to OCI services. If your environment requires you to use a proxy server for outgoing HTTP requests then you can set this up in the following ways: 1. Configuring environment variable as described here https://golang.org/pkg/net/http/#ProxyFromEnvironment 2. Modifying the underlying Transport struct for a service client In order to modify the underlying Transport struct in HttpClient, you can do something similar to (sample code for audit service client): The Object Storage service supports multipart uploads to make large object uploads easier by splitting the large object into parts. The Go SDK supports raw multipart upload operations for advanced use cases, as well as a higher level upload class that uses the multipart upload APIs. For links to the APIs used for multipart upload operations, see Managing Multipart Uploads (https://docs.cloud.oracle.com/iaas/Content/Object/Tasks/usingmultipartuploads.htm). Higher level multipart uploads are implemented using the UploadManager, which will: split a large object into parts for you, upload the parts in parallel, and then recombine and commit the parts as a single object in storage. This code sample shows how to use the UploadManager to automatically split an object into parts for upload to simplify interaction with the Object Storage service: https://github.com/oracle/oci-go-sdk/blob/master/example/example_objectstorage_test.go Some response fields are enum-typed. In the future, individual services may return values not covered by existing enums for that field. To address this possibility, every enum-type response field is a modeled as a type that supports any string. Thus if a service returns a value that is not recognized by your version of the SDK, then the response field will be set to this value. When individual services return a polymorphic JSON response not available as a concrete struct, the SDK will return an implementation that only satisfies the interface modeling the polymorphic JSON response. If you are using a version of the SDK released prior to the announcement of a new region, you may need to use a workaround to reach it, depending on whether the region is in the oraclecloud.com realm. A region is a localized geographic area. For more information on regions and how to identify them, see Regions and Availability Domains(https://docs.cloud.oracle.com/iaas/Content/General/Concepts/regions.htm). A realm is a set of regions that share entities. You can identify your realm by looking at the domain name at the end of the network address. For example, the realm for xyz.abc.123.oraclecloud.com is oraclecloud.com. oraclecloud.com Realm: For regions in the oraclecloud.com realm, even if common.Region does not contain the new region, the forward compatibility of the SDK can automatically handle it. You can pass new region names just as you would pass ones that are already defined. For more information on passing region names in the configuration, see Configuring (https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring). For details on common.Region, see (https://github.com/oracle/oci-go-sdk/blob/master/common/common.go). Other Realms: For regions in realms other than oraclecloud.com, you can use the following workarounds to reach new regions with earlier versions of the SDK. NOTE: Be sure to supply the appropriate endpoints for your region. You can overwrite the target host with client.Host: If you are authenticating via instance principals, you can set the authentication endpoint in an environment variable: Got a fix for a bug, or a new feature you'd like to contribute? The SDK is open source and accepting pull requests on GitHub https://github.com/oracle/oci-go-sdk Licensing information available at: https://github.com/oracle/oci-go-sdk/blob/master/LICENSE.txt To be notified when a new version of the Go SDK is released, subscribe to the following feed: https://github.com/oracle/oci-go-sdk/releases.atom Please refer to this link: https://github.com/oracle/oci-go-sdk#help

This is the official Go SDK for Oracle Cloud Infrastructure Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#installing for installation instructions. Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring for configuration instructions. The following example shows how to get started with the SDK. The example belows creates an identityClient struct with the default configuration. It then utilizes the identityClient to list availability domains and prints them out to stdout More examples can be found in the SDK Github repo: https://github.com/oracle/oci-go-sdk/tree/master/example Optional fields are represented with the `mandatory:"false"` tag on input structs. The SDK will omit all optional fields that are nil when making requests. In the case of enum-type fields, the SDK will omit fields whose value is an empty string. The SDK uses pointers for primitive types in many input structs. To aid in the construction of such structs, the SDK provides functions that return a pointer for a given value. For example: The SDK exposes functionality that allows the user to customize any http request before is sent to the service. You can do so by setting the `Interceptor` field in any of the `Client` structs. For example: The Interceptor closure gets called before the signing process, thus any changes done to the request will be properly signed and submitted to the service. The SDK exposes a stand-alone signer that can be used to signing custom requests. Related code can be found here: https://github.com/oracle/oci-go-sdk/blob/master/common/http_signer.go. The example below shows how to create a default signer. The signer also allows more granular control on the headers used for signing. For example: You can combine a custom signer with the exposed clients in the SDK. This allows you to add custom signed headers to the request. Following is an example: Bear in mind that some services have a white list of headers that it expects to be signed. Therefore, adding an arbitrary header can result in authentications errors. To see a runnable example, see https://github.com/oracle/oci-go-sdk/blob/master/example/example_identity_test.go For more information on the signing algorithm refer to: https://docs.cloud.oracle.com/Content/API/Concepts/signingrequests.htm Some operations accept or return polymorphic JSON objects. The SDK models such objects as interfaces. Further the SDK provides structs that implement such interfaces. Thus, for all operations that expect interfaces as input, pass the struct in the SDK that satisfies such interface. For example: In the case of a polymorphic response you can type assert the interface to the expected type. For example: An example of polymorphic JSON request handling can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_test.go#L63 When calling a list operation, the operation will retrieve a page of results. To retrieve more data, call the list operation again, passing in the value of the most recent response's OpcNextPage as the value of Page in the next list operation call. When there is no more data the OpcNextPage field will be nil. An example of pagination using this logic can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_pagination_test.go The SDK has a built-in logging mechanism used internally. The internal logging logic is used to record the raw http requests, responses and potential errors when (un)marshalling request and responses. Built-in logging in the SDK is controlled via the environment variable "OCI_GO_SDK_DEBUG" and its contents. The below are possible values for the "OCI_GO_SDK_DEBUG" variable 1. "info" or "i" enables all info logging messages 2. "debug" or "d" enables all debug and info logging messages 3. "verbose" or "v" or "1" enables all verbose, debug and info logging messages 4. "null" turns all logging messages off. If the value of the environment variable does not match any of the above then default logging level is "info". If the environment variable is not present then no logging messages are emitted. The default destination for logging is Stderr and if you want to output log to a file you can set via environment variable "OCI_GO_SDK_LOG_OUTPUT_MODE". The below are possible values 1. "file" or "f" enables all logging output saved to file 2. "combine" or "c" enables all logging output to both stderr and file You can also customize the log file location and name via "OCI_GO_SDK_LOG_FILE" environment variable, the value should be the path to a specific file If this environment variable is not present, the default location will be the project root path Sometimes you may need to wait until an attribute of a resource, such as an instance or a VCN, reaches a certain state. An example of this would be launching an instance and then waiting for the instance to become available, or waiting until a subnet in a VCN has been terminated. You might also want to retry the same operation again if there's network issue etc... This can be accomplished by using the RequestMetadata.RetryPolicy. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_retry_test.go The GO SDK uses the net/http package to make calls to OCI services. If your environment requires you to use a proxy server for outgoing HTTP requests then you can set this up in the following ways: 1. Configuring environment variable as described here https://golang.org/pkg/net/http/#ProxyFromEnvironment 2. Modifying the underlying Transport struct for a service client In order to modify the underlying Transport struct in HttpClient, you can do something similar to (sample code for audit service client): The Object Storage service supports multipart uploads to make large object uploads easier by splitting the large object into parts. The Go SDK supports raw multipart upload operations for advanced use cases, as well as a higher level upload class that uses the multipart upload APIs. For links to the APIs used for multipart upload operations, see Managing Multipart Uploads (https://docs.cloud.oracle.com/iaas/Content/Object/Tasks/usingmultipartuploads.htm). Higher level multipart uploads are implemented using the UploadManager, which will: split a large object into parts for you, upload the parts in parallel, and then recombine and commit the parts as a single object in storage. This code sample shows how to use the UploadManager to automatically split an object into parts for upload to simplify interaction with the Object Storage service: https://github.com/oracle/oci-go-sdk/blob/master/example/example_objectstorage_test.go Some response fields are enum-typed. In the future, individual services may return values not covered by existing enums for that field. To address this possibility, every enum-type response field is a modeled as a type that supports any string. Thus if a service returns a value that is not recognized by your version of the SDK, then the response field will be set to this value. When individual services return a polymorphic JSON response not available as a concrete struct, the SDK will return an implementation that only satisfies the interface modeling the polymorphic JSON response. If you are using a version of the SDK released prior to the announcement of a new region, you may need to use a workaround to reach it, depending on whether the region is in the oraclecloud.com realm. A region is a localized geographic area. For more information on regions and how to identify them, see Regions and Availability Domains(https://docs.cloud.oracle.com/iaas/Content/General/Concepts/regions.htm). A realm is a set of regions that share entities. You can identify your realm by looking at the domain name at the end of the network address. For example, the realm for xyz.abc.123.oraclecloud.com is oraclecloud.com. oraclecloud.com Realm: For regions in the oraclecloud.com realm, even if common.Region does not contain the new region, the forward compatibility of the SDK can automatically handle it. You can pass new region names just as you would pass ones that are already defined. For more information on passing region names in the configuration, see Configuring (https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring). For details on common.Region, see (https://github.com/oracle/oci-go-sdk/blob/master/common/common.go). Other Realms: For regions in realms other than oraclecloud.com, you can use the following workarounds to reach new regions with earlier versions of the SDK. NOTE: Be sure to supply the appropriate endpoints for your region. You can overwrite the target host with client.Host: If you are authenticating via instance principals, you can set the authentication endpoint in an environment variable: Got a fix for a bug, or a new feature you'd like to contribute? The SDK is open source and accepting pull requests on GitHub https://github.com/oracle/oci-go-sdk Licensing information available at: https://github.com/oracle/oci-go-sdk/blob/master/LICENSE.txt To be notified when a new version of the Go SDK is released, subscribe to the following feed: https://github.com/oracle/oci-go-sdk/releases.atom Please refer to this link: https://github.com/oracle/oci-go-sdk#help

Package retryablehttp provides a familiar HTTP client interface with automatic retries and exponential backoff. It is a thin wrapper over the standard net/http client library and exposes nearly the same public API. This makes retryablehttp very easy to drop into existing programs. retryablehttp performs automatic retries under certain conditions. Mainly, if an error is returned by the client (connection errors etc), or if a 500-range response is received, then a retry is invoked. Otherwise, the response is returned and left to the caller to interpret. Requests which take a request body should provide a non-nil function parameter. The best choice is to provide either a function satisfying ReaderFunc which provides multiple io.Readers in an efficient manner, a *bytes.Buffer (the underlying raw byte slice will be used) or a raw byte slice. As it is a reference type, and we will wrap it as needed by readers, we can efficiently re-use the request body without needing to copy it. If an io.Reader (such as a *bytes.Reader) is provided, the full body will be read prior to the first request, and will be efficiently re-used for any retries. ReadSeeker can be used, but some users have observed occasional data races between the net/http library and the Seek functionality of some implementations of ReadSeeker, so should be avoided if possible.

Package throttled implements different throttling strategies for controlling access to HTTP handlers. go get gopkg.in/throttled/throttled.v1/... The Interval function creates a throttler that allows requests to go through at a controlled, constant interval. The interval may be applied to all requests (vary argument == nil) or independently based on vary-by criteria. For example: Creates a throttler that will allow a request each 100ms (10 requests per second), with a buffer of 100 exceeding requests before dropping requests with a status code 429 (by default, configurable using th.DeniedHandler or the package-global DefaultDeniedHandler variable). Different paths will be throttled independently, so that /path_a and /path_b both can serve 10 requests per second. The last argument, 50, indicates the maximum number of keys that the throttler will keep in memory. The MemStats function creates a throttler that allows requests to go through only if the memory statistics of the current process are below specified thresholds. For example: Creates a throttler that will allow requests to go through until the number of garbage collections reaches the initial number + 10 (the MemThresholds function creates absolute memory stats thresholds from offsets). The second argument, 10ms, indicates the refresh rate of the memory stats. The RateLimit function creates a throttler that allows a certain number of requests in a given time window, as is often implemented in public RESTful APIs. For example: Creates a throttler that will limit requests to 30 per minute, based on the remote address of the client, and will store the counter and remaining time of the current window in the provided memory store, limiting the number of keys to keep in memory to 1000. The store sub-package also provides a Redis-based Store implementations. The RateLimit throttler sets the expected X-RateLimit-* headers on the response, and also sets a Retry-After header when the limit is exceeded. The API documentation is available as usual on godoc.org: There is also a blog post explaining the package's usage on 0value.com: Finally, many examples are provided in the /examples sub-folder of the repository. The BSD 3-clause license. Copyright (c) 2014 Martin Angers and Contributors.

Package atreugo is a high performance and extensible micro web framework with zero memory allocations in hot paths It's build on top of fasthttp and provides the following features: Optimized for speed. Easily handles more than 100K qps and more than 1M concurrent keep-alive connections on modern hardware. Optimized for low memory usage. Easy 'Connection: Upgrade' support via RequestCtx.Hijack. Server provides the following anti-DoS limits: The number of concurrent connections. The number of concurrent connections per client IP. The number of requests per connection. Request read timeout. Response write timeout. Maximum request header size. Maximum request body size. Maximum request execution time. Maximum keep-alive connection lifetime. Early filtering out non-GET requests. A lot of additional useful info is exposed to request handler: Server and client address. Per-request logger. Unique request id. Request start time. Connection start time. Request sequence number for the current connection. Middlewares support: Before view execution. After view execution. Easy routing: Path parameters (mandatories and optionals). Views with timeout. Group paths and middlewares. Static files. Serve one file like pdf, etc. Filters (middlewares) to specific views. net/http handlers support. fasthttp handlers support Common responses (also you could use your own responses): JSON HTTP Text Raw File Redirect

Gotalk is a complete muli-peer real-time messaging library. See https://github.com/rsms/gotalk#readme for a more in-depth explanation of what Gotalk is and what it can do for you. Most commonly Gotalk is used for rich web app development, as an alternative to HTTP APIs, when the web app mainly runs client-side rather than uses a traditional "request a new page" style. Here is an example of a minimal but fully functional web server with Gotalk over websocket: Here is a matching HTML document; a very basic web app: Gotalk can be thought of as being composed by four layers: You can make use of only some parts. For example you could write and read structured data in files using the message protocol and basic file I/O, or use the high-level request-response API with some custom transport.

Packages in the Plugin directory contain plugins for [goa v2](https://godoc.org/goa.design/goa/v3). Plugins can extend the goa DSL, generate new artifacts and modify the output of existing generators. There are currently two plugins in the directory: The [goakit](https://godoc.org/goa.design/plugins/goakit) plugin generates code that integrates with the [go-kit](https://github.com/go-kit/kit) library. The [cors](https://godoc.org/goa.design/plugins/cors) plugin adds new DSL to define CORS policies. The plugin generates HTTP server code that respond to CORS requests in compliance with the policies defined in the design. Writing a plugin consists of two steps: 1. Writing the functions that gets called by the goa tool during code generation. 2. Registering the functions with the goa tool. A plugin may implement the "gen" goa command, the "example" goa command or both. In each case a plugin may register one or two functions: the first function called "Prepare" gets called prior to any code generation actually happening. The function can modify the design data structures before goa uses them to generate code. The second function called "Generate" does the actual code generation. The signature of the Generate function is: where: The function must return the entire set of generated files (even the files that the plugin does not modify). The functions must then be registered with the goa code generator tool using the "RegisterPlugin" function of the "codegen" package. This is typically done in a package "init" function, for example: The first argument of RegisterPlugin must be one of "gen" or "example" and specifies the "goa" command that triggers the call to the plugin functions. The second argument is the Prepare function if any, nil otherwise. The last argument is the code generator function if any, nil otherwise. A plugin may introduce new DSL "keywords" (typically Go package functions). The DSL functions initialize the content of a design root object (an object that implements the "eval.Root" interface), for example: The [eval](https://godoc.org/goa.design/goa/v3/codegen/eval) package contains a number of functions that can be leveraged to implement the DSL such as error reporting functions. The plugin design root object is then given to the plugin Generate function (if there's one) which may take advantage of it to generate the code.

Package localtunnel implements a client library for https://localtunnel.me In addition to providing the LocalTunnel client which will forward requests from subdomain.localtunnel.me to a port on localhost. This package also provides an implementation of net.Listener which exposes connections from localtunnel. This enables users to serve http requests directly, without listening to a port on localhost.

Package gorilla/http is a high level HTTP client. This package provides high level convience methods for common http operations. Additionally a high level HTTP client implementation. These high level functions are expected to change. Your feedback on their form and utility is warmly requested. Please raise issues at https://github.com/gorilla/http/issues. For lower level http implementations, see gorilla/http/client.

This is the official Go SDK for Oracle Cloud Infrastructure Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#installing for installation instructions. Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring for configuration instructions. The following example shows how to get started with the SDK. The example belows creates an identityClient struct with the default configuration. It then utilizes the identityClient to list availability domains and prints them out to stdout More examples can be found in the SDK Github repo: https://github.com/oracle/oci-go-sdk/tree/master/example Optional fields are represented with the `mandatory:"false"` tag on input structs. The SDK will omit all optional fields that are nil when making requests. In the case of enum-type fields, the SDK will omit fields whose value is an empty string. The SDK uses pointers for primitive types in many input structs. To aid in the construction of such structs, the SDK provides functions that return a pointer for a given value. For example: The SDK exposes functionality that allows the user to customize any http request before is sent to the service. You can do so by setting the `Interceptor` field in any of the `Client` structs. For example: The Interceptor closure gets called before the signing process, thus any changes done to the request will be properly signed and submitted to the service. The SDK exposes a stand-alone signer that can be used to signing custom requests. Related code can be found here: https://github.com/oracle/oci-go-sdk/blob/master/common/http_signer.go. The example below shows how to create a default signer. The signer also allows more granular control on the headers used for signing. For example: You can combine a custom signer with the exposed clients in the SDK. This allows you to add custom signed headers to the request. Following is an example: Bear in mind that some services have a white list of headers that it expects to be signed. Therefore, adding an arbitrary header can result in authentications errors. To see a runnable example, see https://github.com/oracle/oci-go-sdk/blob/master/example/example_identity_test.go For more information on the signing algorithm refer to: https://docs.cloud.oracle.com/Content/API/Concepts/signingrequests.htm Some operations accept or return polymorphic JSON objects. The SDK models such objects as interfaces. Further the SDK provides structs that implement such interfaces. Thus, for all operations that expect interfaces as input, pass the struct in the SDK that satisfies such interface. For example: In the case of a polymorphic response you can type assert the interface to the expected type. For example: An example of polymorphic JSON request handling can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_test.go#L63 When calling a list operation, the operation will retrieve a page of results. To retrieve more data, call the list operation again, passing in the value of the most recent response's OpcNextPage as the value of Page in the next list operation call. When there is no more data the OpcNextPage field will be nil. An example of pagination using this logic can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_pagination_test.go The SDK has a built-in logging mechanism used internally. The internal logging logic is used to record the raw http requests, responses and potential errors when (un)marshalling request and responses. Built-in logging in the SDK is controlled via the environment variable "OCI_GO_SDK_DEBUG" and its contents. The below are possible values for the "OCI_GO_SDK_DEBUG" variable 1. "info" or "i" enables all info logging messages 2. "debug" or "d" enables all debug and info logging messages 3. "verbose" or "v" or "1" enables all verbose, debug and info logging messages 4. "null" turns all logging messages off. If the value of the environment variable does not match any of the above then default logging level is "info". If the environment variable is not present then no logging messages are emitted. The default destination for logging is Stderr and if you want to output log to a file you can set via environment variable "OCI_GO_SDK_LOG_OUTPUT_MODE". The below are possible values 1. "file" or "f" enables all logging output saved to file 2. "combine" or "c" enables all logging output to both stderr and file You can also customize the log file location and name via "OCI_GO_SDK_LOG_FILE" environment variable, the value should be the path to a specific file If this environment variable is not present, the default location will be the project root path Sometimes you may need to wait until an attribute of a resource, such as an instance or a VCN, reaches a certain state. An example of this would be launching an instance and then waiting for the instance to become available, or waiting until a subnet in a VCN has been terminated. You might also want to retry the same operation again if there's network issue etc... This can be accomplished by using the RequestMetadata.RetryPolicy. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_retry_test.go If you are trying to make a PUT/POST API call with binary request body, please make sure the binary request body is resettable, which means the request body should inherit Seeker interface. The OCI Go SDK defines a default retry policy that retries on the errors suitable for retries (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm), for a recommended period of time (up to 7 attempts spread out over at most approximately 1.5 minutes). This default retry policy can be created using: You can set this retry policy for a single request: or for all requests made by a client: Some resources may have to be replicated across regions and are only eventually consistent. That means the request to create, update, or delete the resource succeeded, but the resource is not available everywhere immediately. Creating, updating, or deleting any resource in the Identity service is affected by eventual consistency, and doing so may cause other operations in other services to fail until the Identity resource has been replicated. For example, the request to CreateTag in the Identity service in the home region succeeds, but immediately using that created tag in another region in a request to LaunchInstance in the Compute service may fail. If you are creating, updating, or deleting resources in the Identity service, we recommend using an eventually consistent retry policy for any service you access. The default retry policy already deals with eventual consistency. Example: This retry policy will use a different strategy if an eventually consistent change was made in the recent past (called the "eventually consistent window", currently defined to be 4 minutes after the eventually consistent change). This special retry policy for eventual consistency will: 1. make up to 9 attempts (including the initial attempt); if an attempt is successful, no more attempts will be made 2. retry at most until (a) approximately the end of the eventually consistent window or (b) the end of the default retry period of about 1.5 minutes, whichever is farther in the future; if an attempt is successful, no more attempts will be made, and the OCI Go SDK will not wait any longer 3. retry on the error codes 400-RelatedResourceNotAuthorizedOrNotFound, 404-NotAuthorizedOrNotFound, and 409-NotAuthorizedOrResourceAlreadyExists, for which the default retry policy does not retry, in addition to the errors the default retry policy retries on (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm) If there were no eventually consistent actions within the recent past, then this special retry strategy is not used. If you want a retry policy that does not handle eventual consistency in a special way, for example because you retry on all error responses, you can use DefaultRetryPolicyWithoutEventualConsistency or NewRetryPolicyWithOptions with the common.ReplaceWithValuesFromRetryPolicy(common.DefaultRetryPolicyWithoutEventualConsistency()) option: The NewRetryPolicy function also creates a retry policy without eventual consistency. The GO SDK uses the net/http package to make calls to OCI services. If your environment requires you to use a proxy server for outgoing HTTP requests then you can set this up in the following ways: 1. Configuring environment variable as described here https://golang.org/pkg/net/http/#ProxyFromEnvironment 2. Modifying the underlying Transport struct for a service client In order to modify the underlying Transport struct in HttpClient, you can do something similar to (sample code for audit service client): The Object Storage service supports multipart uploads to make large object uploads easier by splitting the large object into parts. The Go SDK supports raw multipart upload operations for advanced use cases, as well as a higher level upload class that uses the multipart upload APIs. For links to the APIs used for multipart upload operations, see Managing Multipart Uploads (https://docs.cloud.oracle.com/iaas/Content/Object/Tasks/usingmultipartuploads.htm). Higher level multipart uploads are implemented using the UploadManager, which will: split a large object into parts for you, upload the parts in parallel, and then recombine and commit the parts as a single object in storage. This code sample shows how to use the UploadManager to automatically split an object into parts for upload to simplify interaction with the Object Storage service: https://github.com/oracle/oci-go-sdk/blob/master/example/example_objectstorage_test.go Some response fields are enum-typed. In the future, individual services may return values not covered by existing enums for that field. To address this possibility, every enum-type response field is a modeled as a type that supports any string. Thus if a service returns a value that is not recognized by your version of the SDK, then the response field will be set to this value. When individual services return a polymorphic JSON response not available as a concrete struct, the SDK will return an implementation that only satisfies the interface modeling the polymorphic JSON response. If you are using a version of the SDK released prior to the announcement of a new region, you may need to use a workaround to reach it, depending on whether the region is in the oraclecloud.com realm. A region is a localized geographic area. For more information on regions and how to identify them, see Regions and Availability Domains(https://docs.cloud.oracle.com/iaas/Content/General/Concepts/regions.htm). A realm is a set of regions that share entities. You can identify your realm by looking at the domain name at the end of the network address. For example, the realm for xyz.abc.123.oraclecloud.com is oraclecloud.com. oraclecloud.com Realm: For regions in the oraclecloud.com realm, even if common.Region does not contain the new region, the forward compatibility of the SDK can automatically handle it. You can pass new region names just as you would pass ones that are already defined. For more information on passing region names in the configuration, see Configuring (https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring). For details on common.Region, see (https://github.com/oracle/oci-go-sdk/blob/master/common/common.go). Other Realms: For regions in realms other than oraclecloud.com, you can use the following workarounds to reach new regions with earlier versions of the SDK. NOTE: Be sure to supply the appropriate endpoints for your region. You can overwrite the target host with client.Host: If you are authenticating via instance principals, you can set the authentication endpoint in an environment variable: Got a fix for a bug, or a new feature you'd like to contribute? The SDK is open source and accepting pull requests on GitHub https://github.com/oracle/oci-go-sdk Licensing information available at: https://github.com/oracle/oci-go-sdk/blob/master/LICENSE.txt To be notified when a new version of the Go SDK is released, subscribe to the following feed: https://github.com/oracle/oci-go-sdk/releases.atom Please refer to this link: https://github.com/oracle/oci-go-sdk#help

Package cloud is the root of the packages used to access Google Cloud Services. See https://godoc.org/cloud.google.com/go for a full list of sub-packages. All clients in sub-packages are configurable via client options. These options are described here: https://godoc.org/google.golang.org/api/option. All the clients in sub-packages support authentication via Google Application Default Credentials (see https://cloud.google.com/docs/authentication/production), or by providing a JSON key file for a Service Account. See the authentication examples in this package for details. By default, all requests in sub-packages will run indefinitely, retrying on transient errors when correctness allows. To set timeouts or arrange for cancellation, use contexts. See the examples for details. Do not attempt to control the initial connection (dialing) of a service by setting a timeout on the context passed to NewClient. Dialing is non-blocking, so timeouts would be ineffective and would only interfere with credential refreshing, which uses the same context. Connection pooling differs in clients based on their transport. Cloud clients either rely on HTTP or gRPC transports to communicate with Google Cloud. Cloud clients that use HTTP (bigquery, compute, storage, and translate) rely on the underlying HTTP transport to cache connections for later re-use. These are cached to the default http.MaxIdleConns and http.MaxIdleConnsPerHost settings in http.DefaultTransport. For gRPC clients (all others in this repo), connection pooling is configurable. Users of cloud client libraries may specify option.WithGRPCConnectionPool(n) as a client option to NewClient calls. This configures the underlying gRPC connections to be pooled and addressed in a round robin fashion. Minimal docker images like Alpine lack CA certificates. This causes RPCs to appear to hang, because gRPC retries indefinitely. See https://github.com/GoogleCloudPlatform/google-cloud-go/issues/928 for more information. To see gRPC logs, set the environment variable GRPC_GO_LOG_SEVERITY_LEVEL. See https://godoc.org/google.golang.org/grpc/grpclog for more information. For HTTP logging, set the GODEBUG environment variable to "http2debug=1" or "http2debug=2". Google Application Default Credentials is the recommended way to authorize and authenticate clients. For information on how to create and obtain Application Default Credentials, see https://developers.google.com/identity/protocols/application-default-credentials. To arrange for an RPC to be canceled, use context.WithCancel. You can use a file with credentials to authenticate and authorize, such as a JSON key file associated with a Google service account. Service Account keys can be created and downloaded from https://console.developers.google.com/permissions/serviceaccounts. This example uses the Datastore client, but the same steps apply to the other client libraries underneath this package. In some cases (for instance, you don't want to store secrets on disk), you can create credentials from in-memory JSON and use the WithCredentials option. The google package in this example is at golang.org/x/oauth2/google. This example uses the PubSub client, but the same steps apply to the other client libraries underneath this package. To set a timeout for an RPC, use context.WithTimeout.

Package fasthttp provides fast HTTP server and client API. Fasthttp provides the following features: Optimized for speed. Easily handles more than 100K qps and more than 1M concurrent keep-alive connections on modern hardware. Optimized for low memory usage. Easy 'Connection: Upgrade' support via RequestCtx.Hijack. Server supports requests' pipelining. Multiple requests may be read from a single network packet and multiple responses may be sent in a single network packet. This may be useful for highly loaded REST services. Server provides the following anti-DoS limits: The number of concurrent connections. The number of concurrent connections per client IP. The number of requests per connection. Request read timeout. Response write timeout. Maximum request header size. Maximum request body size. Maximum request execution time. Maximum keep-alive connection lifetime. Early filtering out non-GET requests. A lot of additional useful info is exposed to request handler: Server and client address. Per-request logger. Unique request id. Request start time. Connection start time. Request sequence number for the current connection. Client supports automatic retry on idempotent requests' failure. Fasthttp API is designed with the ability to extend existing client and server implementations or to write custom client and server implementations from scratch.

Package godb is query builder and struct mapper. godb does not manage relationships like Active Record or Entity Framework, it's not a full-featured ORM. Its goal is to be more productive than manually doing mapping between Go structs and databases tables. godb needs adapters to use databases, some are packaged with godb for : Start with an adapter, and the Open method which returns a godb.DB pointer : There are three ways to executes SQL with godb : Using raw queries you can execute any SQL queries and get the results into a slice of structs (or single struct) using the automatic mapping. Structs tools looks more 'orm-ish' as they're take instances of objects or slices to run select, insert, update and delete. Statements tools stand between raw queries and structs tools. It's easier to use than raw queries, but are limited to simpler cases. The statements tools are based on types : Example : The SelectStatement type could also build a query using columns from a structs. It facilitates the build of queries returning values from multiple table (or views). See struct mapping explanations, in particular the `rel` part. Example : The structs tools are based on types : Examples : Raw queries are executed using the RawSQL type. The query could be a simple hand-written string, or something complex builded using SQLBuffer and Conditions. Example : Stucts contents are mapped to databases columns with tags, like in previous example with the Book struct. The tag is 'db' and its content is : For autoincrement identifier simple use both 'key' and 'auto'. Example : More than one field could have the 'key' keyword, but with most databases drivers none of them could have the 'auto' keyword, because executing an insert query only returns one value : the last inserted id : https://golang.org/pkg/database/sql/driver/#RowsAffected.LastInsertId . With PostgreSQL you cas have multiple fields with 'key' and 'auto' options. Structs could be nested. A nested struct is mapped only if has the 'db' tag. The tag value is a columns prefix applied to all fields columns of the struct. The prefix is not mandatory, a blank string is allowed (no prefix). A nested struct could also have an optionnal `rel` attribute of the form `rel=relationname`. It's useful to build a select query using multiples relations (table, view, ...). See the example using the BooksWithInventories type. Example Databases columns are : The mapping is managed by the 'dbreflect' subpackage. Normally its direct use is not necessary, except in one case : some structs are scannable and have to be considered like fields, and mapped to databases columns. Common case are time.Time, or sql.NullString, ... You can register a custom struct with the `RegisterScannableStruct` and a struct instance, for example the time.Time is registered like this : The structs statements use the struct name as table name. But you can override this simply by simplementing a TableName method : Statements and structs tools manage 'where' and 'group by' sql clauses. These conditional clauses are build either with raw sql code, or build with the Condition struct like this : WhereQ methods take a Condition instance build by godb.Q . Where mathods take raw SQL, but is just a syntactic sugar. These calls are equivalents : Multiple calls to Where or WhereQ are allowed, these calls are equivalents : Slices are managed in a particular way : a single placeholder is replaced with multiple ones. This allows code like : The SQLBuffer exists to ease the build of complex raw queries. It's also used internaly by godb. Its use and purpose are simple : concatenate sql parts (accompagned by their arguments) in an efficient way. Example : For all databases, structs updates and deletes manage optimistic locking when a dedicated integer row is present. Simply tags it with `oplock` : When an update or delete operation fails, Do() returns the `ErrOpLock` error. With PostgreSQL and SQL Server, godb manages optimistic locking with automatic fields. Just add a dedicated field in the struct and tag it with `auto,oplock`. With PostgreSQL you can use the `xmin` system column like this : For more informations about `xmin` see https://www.postgresql.org/docs/10/static/ddl-system-columns.html With SQL Server you can use a `rowversion` field with the `mssql.Rowversion` type like this : For more informations about the `rowversion` data type see https://docs.microsoft.com/en-us/sql/t-sql/data-types/rowversion-transact-sql godb keep track of time consumed while executing queries. You can reset it and get the time consumed since Open or the previous reset : You can log all executed queried and details of condumed time. Simply add a logger : godb takes advantage of PostgreSQL RETURNING clause, and SQL Server OUTPUT clause. With statements tools you have to add a RETURNING clause with the Suffix method and call DoWithReturning method instead of Do(). It's optionnal. With StructInsert it's transparent, the RETURNING or OUTPUT clause is added for all 'auto' columns and it's managed for you. One of the big advantage is with BulkInsert : for others databases the rows are inserted but the new keys are unkonwns. With PostgreSQL and SQL Server the slice is updated for all inserted rows. It also enables optimistic locking with *automatic* columns. godb has two prepared statements caches, one to use during transactions, and one to use outside of a transaction. Both use a LRU algorithm. The transaction cache is enabled by default, but not the other. A transaction (sql.Tx) isn't shared between goroutines, using prepared statement with it has a predictable behavious. But without transaction a prepared statement could have to be reprepared on a different connection if needed, leading to unpredictable performances in high concurrency scenario. Enabling the non transaction cache could improve performances with single goroutine batch. With multiple goroutines accessing the same database : it depends ! A benchmark would be wise. Using statements tools and structs tools you can execute select queries and get an iterator instead of filling a slice of struct instances. This could be useful if the request's result is big and you don't want to allocate too much memory. On the other side you will write almost as much code as with the `sql` package, but with an automatic struct mapping, and a request builder. Iterators are also available with raw queries. In this cas you cas executes any kind of sql code, not just select queries. To get an interator simply use the `DoWithIterator` method instead of `Do`. The iterator usage is similar to the standard `sql.Rows` type. Don't forget to check that there are no errors with the `Err` method, and don't forget to call `Close` when the iterator is no longer useful, especially if you don't scan all the resultset. To avoid performance cost godb.DB does not implement synchronization. So a given instance of godb.DB should not be used by multiple goroutines. But a godb.DB instance can be created and used as a blueprint and cloned for each goroutine. See Clone and Clear methods. A typical use case is a web server. When the application starts a godb.DB is created, and cloned in each http handler with Clone, and ressources are to be freed calling Clear (use defer statement).

Package ranger implements an io.ReaderAt and io.ReadSeeker-compliant implementation of a caching HTTP range request client.

Package rpc is a fork of the stdlib net/rpc which is frozen. It adds support for context.Context on the client and server, including propogating cancellation. See the README at https://github.com/keegancsmith/rpc for motivation why this exists. The API is exactly the same, except Client.Call takes a context.Context, and Server methods are expected to take a context.Context as the first argument. The following is the original rpc godoc updated to include context.Context. Additionally the wire protocol is unchanged, so is backwards compatible with net/rpc clients. Package rpc provides access to the exported methods of an object across a network or other I/O connection. A server registers an object, making it visible as a service with the name of the type of the object. After registration, exported methods of the object will be accessible remotely. A server may register multiple objects (services) of different types but it is an error to register multiple objects of the same type. Only methods that satisfy these criteria will be made available for remote access; other methods will be ignored: In effect, the method must look schematically like where T1 and T2 can be marshaled by encoding/gob. These requirements apply even if a different codec is used. (In the future, these requirements may soften for custom codecs.) The method's second argument represents the arguments provided by the caller; the third argument represents the result parameters to be returned to the caller. The method's return value, if non-nil, is passed back as a string that the client sees as if created by errors.New. If an error is returned, the reply parameter will not be sent back to the client. The server may handle requests on a single connection by calling ServeConn. More typically it will create a network listener and call Accept or, for an HTTP listener, HandleHTTP and http.Serve. A client wishing to use the service establishes a connection and then invokes NewClient on the connection. The convenience function Dial (DialHTTP) performs both steps for a raw network connection (an HTTP connection). The resulting Client object has two methods, Call and Go, that specify the service and method to call, a pointer containing the arguments, and a pointer to receive the result parameters. The Call method waits for the remote call to complete while the Go method launches the call asynchronously and signals completion using the Call structure's Done channel. Unless an explicit codec is set up, package encoding/gob is used to transport the data. Here is a simple example. A server wishes to export an object of type Arith: The server calls (for HTTP service): At this point, clients can see a service "Arith" with methods "Arith.Multiply" and "Arith.Divide". To invoke one, a client first dials the server: Then it can make a remote call: or A server implementation will often provide a simple, type-safe wrapper for the client. The net/rpc package is frozen and is not accepting new features.

Package egoscale is a mapping for the Exoscale API (https://community.exoscale.com/api/compute/). To build a request, construct the adequate struct. This library expects a pointer for efficiency reasons only. The response is a struct corresponding to the data at stake. E.g. DeployVirtualMachine gives a VirtualMachine, as a pointer as well to avoid big copies. Then everything within the struct is not a pointer. Find below some examples of how egoscale may be used. If anything feels odd or unclear, please let us know: https://github.com/exoscale/egoscale/issues This example deploys a virtual machine while controlling the job status as it goes. It enables a finer control over errors, e.g. HTTP timeout, and eventually a way to kill it of (from the client side). As this library is mostly an HTTP client, you can reuse all the existing tools around it. Nota bene: when running the tests or the egoscale library via another tool, e.g. the exo cli, the environment variable EXOSCALE_TRACE=prefix does the above configuration for you. As a developer using egoscale as a library, you'll find it more convenient to plug your favorite io.Writer as it's a Logger. All the available APIs on the server and provided by the API Discovery plugin. Security Groups provide a way to isolate traffic to VMs. Rules are added via the two Authorization commands. Security Group also implement the generic List, Get and Delete interfaces (Listable and Deletable). See: https://community.exoscale.com/documentation/compute/security-groups/ A Zone corresponds to a Data Center. You may list them. Zone implements the Listable interface, which let you perform a list in two different ways. The first exposes the underlying request while the second one hide them and you only manipulate the structs of your interest. An Elastic IP is a way to attach an IP address to many Virtual Machines. The API side of the story configures the external environment, like the routing. Some work is required within the machine to properly configure the interfaces. See: https://community.exoscale.com/documentation/compute/eip/

Package recover is a HTTP middleware that catches any panics and serves a proper error response. A GET request to "/" will output:

Package metrics provides minimalist instrumentation for your applications in the form of counters and gauges. A counter is a monotonically-increasing, unsigned, 64-bit integer used to represent the number of times an event has occurred. By tracking the deltas between measurements of a counter over intervals of time, an aggregation layer can derive rates, acceleration, etc. A gauge returns instantaneous measurements of something using signed, 64-bit integers. This value does not need to be monotonic. A histogram tracks the distribution of a stream of values (e.g. the number of milliseconds it takes to handle requests), adding gauges for the values at meaningful quantiles: 50th, 75th, 90th, 95th, 99th, 99.9th. Measurements from counters and gauges are available as expvars. Your service should return its expvars from an HTTP endpoint (i.e., /debug/vars) as a JSON object.

Package gorouter provide request router with middleware The router determines how to handle http request. GoRouter uses a routing tree. Once one branch of the tree matches, only routes inside that branch are considered, not any routes after that branch. When instantiating router, the root node of tree is created. - Static `/hello` (will match requests matching given route) - Named `/{name}` (will match requests matching given route scheme) - Regexp `/{name:[a-z]+}` (will match requests matching given route scheme and its regexp) The values of *named parameter* or *regexp parameters* are accessible via *request context* `params, ok := context.Parameters(req.Context())`. You can get the value of a parameter either by its index in the slice, or by using the `params.Value(name)` method: `:name` or `/{name:[a-z]+}` can be retrieved by `params.Value("name")`. A full route definition contain up to three parts: 1. HTTP method under which route will be available 2. The URL path route. This is matched against the URL passed to the router, and can contain named wildcard placeholders *(e.g. {placeholder})* to match dynamic parts in the URL. 3. `http.HandlerFunc`, which tells the router to handle matched requests to the router with handler. Take the following example: In this case, the route is matched by `/hello/rxxxxxgo` for example, because the `:name` wildcard matches the regular expression wildcard given (`r([a-z]+)go`). However, `/hello/foo` does not match, because "foo" fails the *name* wildcard. When using wildcards, these are returned in the map from request context. The part of the path that the wildcard matched (e.g. *rxxxxxgo*) is used as value.

Package nettrace allows to trace (monitor and record a summary of) network operations that happen behind the scenes during e.g. an HTTP request processing as executed by http.Client.

Package ivs provides the API client, operations, and parameter types for Amazon Interactive Video Service. The Amazon Interactive Video Service (IVS) API is REST compatible, using a standard HTTP API and an Amazon Web Services EventBridge event stream for responses. JSON is used for both requests and responses, including errors. The API is an Amazon Web Services regional service. For a list of supported regions and Amazon IVS HTTPS service endpoints, see the Amazon IVS pagein the Amazon Web Services General Reference. All API request parameters and URLs are case sensitive. For a summary of notable documentation changes in each release, see Document History. Allowed Header Values Accept: application/json Accept-Encoding: gzip, deflate Content-Type: application/json Key Concepts Channel — Stores configuration data related to your live stream. You first create a channel and then use the channel’s stream key to start your live stream. Stream key — An identifier assigned by Amazon IVS when you create a channel, which is then used to authorize streaming. Treat the stream key like a secret, since it allows anyone to stream to the channel. Playback key pair — Video playback may be restricted using playback-authorization tokens, which use public-key encryption. A playback key pair is the public-private pair of keys used to sign and validate the playback-authorization token. Recording configuration — Stores configuration related to recording a live stream and where to store the recorded content. Multiple channels can reference the same recording configuration. Playback restriction policy — Restricts playback by countries and/or origin sites. For more information about your IVS live stream, also see Getting Started with IVS Low-Latency Streaming. A tag is a metadata label that you assign to an Amazon Web Services resource. A tag comprises a key and a value, both set by you. For example, you might set a tag as topic:nature to label a particular video category. See Best practices and strategies in Tagging Amazon Web Services Resources and Tag Editor for details, including restrictions that apply to tags and "Tag naming limits and requirements"; Amazon IVS has no service-specific constraints beyond what is documented there. Tags can help you identify and organize your Amazon Web Services resources. For example, you can use the same tag for different resources to indicate that they are related. You can also use tags to manage access (see Access Tags). The Amazon IVS API has these tag-related operations: TagResource, UntagResource, and ListTagsForResource. The following resources support tagging: Channels, Stream Keys, Playback Key Pairs, and Recording Configurations. At most 50 tags can be applied to a resource. Note the differences between these concepts: Authentication is about verifying identity. You need to be authenticated to sign Amazon IVS API requests. Authorization is about granting permissions. Your IAM roles need to have permissions for Amazon IVS API requests. In addition, authorization is needed to view Amazon IVS private channels. (Private channels are channels that are enabled for "playback authorization.") All Amazon IVS API requests must be authenticated with a signature. The Amazon Web Services Command-Line Interface (CLI) and Amazon IVS Player SDKs take care of signing the underlying API calls for you. However, if your application calls the Amazon IVS API directly, it’s your responsibility to sign the requests. You generate a signature using valid Amazon Web Services credentials that have permission to perform the requested action. For example, you must sign PutMetadata requests with a signature generated from a user account that has the ivs:PutMetadata permission. For more information: Authentication and generating signatures — See Authenticating Requests (Amazon Web Services Signature Version 4)in the Amazon Web Services General Reference. Managing Amazon IVS permissions — See Identity and Access Managementon the Security page of the Amazon IVS User Guide. Amazon Resource Names (ARNs) ARNs uniquely identify AWS resources. An ARN is required when you need to specify a resource unambiguously across all of AWS, such as in IAM policies and API calls. For more information, see Amazon Resource Namesin the AWS General Reference.

Package golangsdk provides a multi-vendor interface to OpenStack-compatible clouds. The library has a three-level hierarchy: providers, services, and resources. Provider structs represent the cloud providers that offer and manage a collection of services. You will generally want to create one Provider client per OpenStack cloud. Use your OpenStack credentials to create a Provider client. The IdentityEndpoint is typically refered to as "auth_url" or "OS_AUTH_URL" in information provided by the cloud operator. Additionally, the cloud may refer to TenantID or TenantName as project_id and project_name. Credentials are specified like so: You may also use the openstack.AuthOptionsFromEnv() helper function. This function reads in standard environment variables frequently found in an OpenStack `openrc` file. Again note that Gophercloud currently uses "tenant" instead of "project". Service structs are specific to a provider and handle all of the logic and operations for a particular OpenStack service. Examples of services include: Compute, Object Storage, Block Storage. In order to define one, you need to pass in the parent provider, like so: Resource structs are the domain models that services make use of in order to work with and represent the state of API resources: Intermediate Result structs are returned for API operations, which allow generic access to the HTTP headers, response body, and any errors associated with the network transaction. To turn a result into a usable resource struct, you must call the Extract method which is chained to the response, or an Extract function from an applicable extension: All requests that enumerate a collection return a Pager struct that is used to iterate through the results one page at a time. Use the EachPage method on that Pager to handle each successive Page in a closure, then use the appropriate extraction method from that request's package to interpret that Page as a slice of results: If you want to obtain the entire collection of pages without doing any intermediary processing on each page, you can use the AllPages method: This top-level package contains utility functions and data types that are used throughout the provider and service packages. Of particular note for end users are the AuthOptions and EndpointOpts structs. An example retry backoff function, which respects the 429 HTTP response code:

This is the official Go SDK for Oracle Cloud Infrastructure Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#installing for installation instructions. Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring for configuration instructions. The following example shows how to get started with the SDK. The example belows creates an identityClient struct with the default configuration. It then utilizes the identityClient to list availability domains and prints them out to stdout More examples can be found in the SDK Github repo: https://github.com/oracle/oci-go-sdk/tree/master/example Optional fields are represented with the `mandatory:"false"` tag on input structs. The SDK will omit all optional fields that are nil when making requests. In the case of enum-type fields, the SDK will omit fields whose value is an empty string. The SDK uses pointers for primitive types in many input structs. To aid in the construction of such structs, the SDK provides functions that return a pointer for a given value. For example: The SDK exposes functionality that allows the user to customize any http request before is sent to the service. You can do so by setting the `Interceptor` field in any of the `Client` structs. For example: The Interceptor closure gets called before the signing process, thus any changes done to the request will be properly signed and submitted to the service. The SDK exposes a stand-alone signer that can be used to signing custom requests. Related code can be found here: https://github.com/oracle/oci-go-sdk/blob/master/common/http_signer.go. The example below shows how to create a default signer. The signer also allows more granular control on the headers used for signing. For example: You can combine a custom signer with the exposed clients in the SDK. This allows you to add custom signed headers to the request. Following is an example: Bear in mind that some services have a white list of headers that it expects to be signed. Therefore, adding an arbitrary header can result in authentications errors. To see a runnable example, see https://github.com/oracle/oci-go-sdk/blob/master/example/example_identity_test.go For more information on the signing algorithm refer to: https://docs.cloud.oracle.com/Content/API/Concepts/signingrequests.htm Some operations accept or return polymorphic JSON objects. The SDK models such objects as interfaces. Further the SDK provides structs that implement such interfaces. Thus, for all operations that expect interfaces as input, pass the struct in the SDK that satisfies such interface. For example: In the case of a polymorphic response you can type assert the interface to the expected type. For example: An example of polymorphic JSON request handling can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_test.go#L63 When calling a list operation, the operation will retrieve a page of results. To retrieve more data, call the list operation again, passing in the value of the most recent response's OpcNextPage as the value of Page in the next list operation call. When there is no more data the OpcNextPage field will be nil. An example of pagination using this logic can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_pagination_test.go The SDK has a built-in logging mechanism used internally. The internal logging logic is used to record the raw http requests, responses and potential errors when (un)marshalling request and responses. Built-in logging in the SDK is controlled via the environment variable "OCI_GO_SDK_DEBUG" and its contents. The below are possible values for the "OCI_GO_SDK_DEBUG" variable 1. "info" or "i" enables all info logging messages 2. "debug" or "d" enables all debug and info logging messages 3. "verbose" or "v" or "1" enables all verbose, debug and info logging messages 4. "null" turns all logging messages off. If the value of the environment variable does not match any of the above then default logging level is "info". If the environment variable is not present then no logging messages are emitted. The default destination for logging is Stderr and if you want to output log to a file you can set via environment variable "OCI_GO_SDK_LOG_OUTPUT_MODE". The below are possible values 1. "file" or "f" enables all logging output saved to file 2. "combine" or "c" enables all logging output to both stderr and file You can also customize the log file location and name via "OCI_GO_SDK_LOG_FILE" environment variable, the value should be the path to a specific file If this environment variable is not present, the default location will be the project root path Sometimes you may need to wait until an attribute of a resource, such as an instance or a VCN, reaches a certain state. An example of this would be launching an instance and then waiting for the instance to become available, or waiting until a subnet in a VCN has been terminated. You might also want to retry the same operation again if there's network issue etc... This can be accomplished by using the RequestMetadata.RetryPolicy. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_retry_test.go If you are trying to make a PUT/POST API call with binary request body, please make sure the binary request body is resettable, which means the request body should inherit Seeker interface. The GO SDK uses the net/http package to make calls to OCI services. If your environment requires you to use a proxy server for outgoing HTTP requests then you can set this up in the following ways: 1. Configuring environment variable as described here https://golang.org/pkg/net/http/#ProxyFromEnvironment 2. Modifying the underlying Transport struct for a service client In order to modify the underlying Transport struct in HttpClient, you can do something similar to (sample code for audit service client): The Object Storage service supports multipart uploads to make large object uploads easier by splitting the large object into parts. The Go SDK supports raw multipart upload operations for advanced use cases, as well as a higher level upload class that uses the multipart upload APIs. For links to the APIs used for multipart upload operations, see Managing Multipart Uploads (https://docs.cloud.oracle.com/iaas/Content/Object/Tasks/usingmultipartuploads.htm). Higher level multipart uploads are implemented using the UploadManager, which will: split a large object into parts for you, upload the parts in parallel, and then recombine and commit the parts as a single object in storage. This code sample shows how to use the UploadManager to automatically split an object into parts for upload to simplify interaction with the Object Storage service: https://github.com/oracle/oci-go-sdk/blob/master/example/example_objectstorage_test.go Some response fields are enum-typed. In the future, individual services may return values not covered by existing enums for that field. To address this possibility, every enum-type response field is a modeled as a type that supports any string. Thus if a service returns a value that is not recognized by your version of the SDK, then the response field will be set to this value. When individual services return a polymorphic JSON response not available as a concrete struct, the SDK will return an implementation that only satisfies the interface modeling the polymorphic JSON response. If you are using a version of the SDK released prior to the announcement of a new region, you may need to use a workaround to reach it, depending on whether the region is in the oraclecloud.com realm. A region is a localized geographic area. For more information on regions and how to identify them, see Regions and Availability Domains(https://docs.cloud.oracle.com/iaas/Content/General/Concepts/regions.htm). A realm is a set of regions that share entities. You can identify your realm by looking at the domain name at the end of the network address. For example, the realm for xyz.abc.123.oraclecloud.com is oraclecloud.com. oraclecloud.com Realm: For regions in the oraclecloud.com realm, even if common.Region does not contain the new region, the forward compatibility of the SDK can automatically handle it. You can pass new region names just as you would pass ones that are already defined. For more information on passing region names in the configuration, see Configuring (https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring). For details on common.Region, see (https://github.com/oracle/oci-go-sdk/blob/master/common/common.go). Other Realms: For regions in realms other than oraclecloud.com, you can use the following workarounds to reach new regions with earlier versions of the SDK. NOTE: Be sure to supply the appropriate endpoints for your region. You can overwrite the target host with client.Host: If you are authenticating via instance principals, you can set the authentication endpoint in an environment variable: Got a fix for a bug, or a new feature you'd like to contribute? The SDK is open source and accepting pull requests on GitHub https://github.com/oracle/oci-go-sdk Licensing information available at: https://github.com/oracle/oci-go-sdk/blob/master/LICENSE.txt To be notified when a new version of the Go SDK is released, subscribe to the following feed: https://github.com/oracle/oci-go-sdk/releases.atom Please refer to this link: https://github.com/oracle/oci-go-sdk#help

This is the official Go SDK for Oracle Cloud Infrastructure Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#installing for installation instructions. Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring for configuration instructions. The following example shows how to get started with the SDK. The example belows creates an identityClient struct with the default configuration. It then utilizes the identityClient to list availability domains and prints them out to stdout More examples can be found in the SDK Github repo: https://github.com/oracle/oci-go-sdk/tree/master/example Optional fields are represented with the `mandatory:"false"` tag on input structs. The SDK will omit all optional fields that are nil when making requests. In the case of enum-type fields, the SDK will omit fields whose value is an empty string. The SDK uses pointers for primitive types in many input structs. To aid in the construction of such structs, the SDK provides functions that return a pointer for a given value. For example: The SDK exposes functionality that allows the user to customize any http request before is sent to the service. You can do so by setting the `Interceptor` field in any of the `Client` structs. For example: The Interceptor closure gets called before the signing process, thus any changes done to the request will be properly signed and submitted to the service. The SDK exposes a stand-alone signer that can be used to signing custom requests. Related code can be found here: https://github.com/oracle/oci-go-sdk/blob/master/common/http_signer.go. The example below shows how to create a default signer. The signer also allows more granular control on the headers used for signing. For example: You can combine a custom signer with the exposed clients in the SDK. This allows you to add custom signed headers to the request. Following is an example: Bear in mind that some services have a white list of headers that it expects to be signed. Therefore, adding an arbitrary header can result in authentications errors. To see a runnable example, see https://github.com/oracle/oci-go-sdk/blob/master/example/example_identity_test.go For more information on the signing algorithm refer to: https://docs.cloud.oracle.com/Content/API/Concepts/signingrequests.htm Some operations accept or return polymorphic JSON objects. The SDK models such objects as interfaces. Further the SDK provides structs that implement such interfaces. Thus, for all operations that expect interfaces as input, pass the struct in the SDK that satisfies such interface. For example: In the case of a polymorphic response you can type assert the interface to the expected type. For example: An example of polymorphic JSON request handling can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_test.go#L63 When calling a list operation, the operation will retrieve a page of results. To retrieve more data, call the list operation again, passing in the value of the most recent response's OpcNextPage as the value of Page in the next list operation call. When there is no more data the OpcNextPage field will be nil. An example of pagination using this logic can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_pagination_test.go The SDK has a built-in logging mechanism used internally. The internal logging logic is used to record the raw http requests, responses and potential errors when (un)marshalling request and responses. Built-in logging in the SDK is controlled via the environment variable "OCI_GO_SDK_DEBUG" and its contents. The below are possible values for the "OCI_GO_SDK_DEBUG" variable 1. "info" or "i" enables all info logging messages 2. "debug" or "d" enables all debug and info logging messages 3. "verbose" or "v" or "1" enables all verbose, debug and info logging messages 4. "null" turns all logging messages off. If the value of the environment variable does not match any of the above then default logging level is "info". If the environment variable is not present then no logging messages are emitted. The default destination for logging is Stderr and if you want to output log to a file you can set via environment variable "OCI_GO_SDK_LOG_OUTPUT_MODE". The below are possible values 1. "file" or "f" enables all logging output saved to file 2. "combine" or "c" enables all logging output to both stderr and file You can also customize the log file location and name via "OCI_GO_SDK_LOG_FILE" environment variable, the value should be the path to a specific file If this environment variable is not present, the default location will be the project root path Sometimes you may need to wait until an attribute of a resource, such as an instance or a VCN, reaches a certain state. An example of this would be launching an instance and then waiting for the instance to become available, or waiting until a subnet in a VCN has been terminated. You might also want to retry the same operation again if there's network issue etc... This can be accomplished by using the RequestMetadata.RetryPolicy(request level configuration), alternatively, global(all services) or client level RetryPolicy configration is also possible. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_retry_test.go If you are trying to make a PUT/POST API call with binary request body, please make sure the binary request body is resettable, which means the request body should inherit Seeker interface. The Retry behavior Precedence (Highest to lowest) is defined as below:- The OCI Go SDK defines a default retry policy that retries on the errors suitable for retries (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm), for a recommended period of time (up to 7 attempts spread out over at most approximately 1.5 minutes). This default retry policy can be created using: You can set this retry policy for a single request: or for all requests made by a client: or for all requests made by all clients: or setting default retry via environment varaible, which is a global switch for all services: Some services enable retry for operations by default, this can be overridden using any alternatives mentioned above. Some resources may have to be replicated across regions and are only eventually consistent. That means the request to create, update, or delete the resource succeeded, but the resource is not available everywhere immediately. Creating, updating, or deleting any resource in the Identity service is affected by eventual consistency, and doing so may cause other operations in other services to fail until the Identity resource has been replicated. For example, the request to CreateTag in the Identity service in the home region succeeds, but immediately using that created tag in another region in a request to LaunchInstance in the Compute service may fail. If you are creating, updating, or deleting resources in the Identity service, we recommend using an eventually consistent retry policy for any service you access. The default retry policy already deals with eventual consistency. Example: This retry policy will use a different strategy if an eventually consistent change was made in the recent past (called the "eventually consistent window", currently defined to be 4 minutes after the eventually consistent change). This special retry policy for eventual consistency will: 1. make up to 9 attempts (including the initial attempt); if an attempt is successful, no more attempts will be made 2. retry at most until (a) approximately the end of the eventually consistent window or (b) the end of the default retry period of about 1.5 minutes, whichever is farther in the future; if an attempt is successful, no more attempts will be made, and the OCI Go SDK will not wait any longer 3. retry on the error codes 400-RelatedResourceNotAuthorizedOrNotFound, 404-NotAuthorizedOrNotFound, and 409-NotAuthorizedOrResourceAlreadyExists, for which the default retry policy does not retry, in addition to the errors the default retry policy retries on (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm) If there were no eventually consistent actions within the recent past, then this special retry strategy is not used. If you want a retry policy that does not handle eventual consistency in a special way, for example because you retry on all error responses, you can use DefaultRetryPolicyWithoutEventualConsistency or NewRetryPolicyWithOptions with the common.ReplaceWithValuesFromRetryPolicy(common.DefaultRetryPolicyWithoutEventualConsistency()) option: The NewRetryPolicy function also creates a retry policy without eventual consistency. Circuit Breaker can prevent an application repeatedly trying to execute an operation that is likely to fail, allowing it to continue without waiting for the fault to be rectified or wasting CPU cycles, of course, it also enables an application to detect whether the fault has been resolved. If the problem appears to have been rectified, the application can attempt to invoke the operation. Go SDK intergrates sony/gobreaker solution, wraps in a circuit breaker object, which monitors for failures. Once the failures reach a certain threshold, the circuit breaker trips, and all further calls to the circuit breaker return with an error, this also saves the service from being overwhelmed with network calls in case of an outage. Go SDK enable circuit breaker with default configuration, if you don't want to enable the solution, can disable the functionality before your application running Go SDK also supports customize Circuit Breaker with specified configuratoins. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_circuitbreaker_test.go The GO SDK uses the net/http package to make calls to OCI services. If your environment requires you to use a proxy server for outgoing HTTP requests then you can set this up in the following ways: 1. Configuring environment variable as described here https://golang.org/pkg/net/http/#ProxyFromEnvironment 2. Modifying the underlying Transport struct for a service client In order to modify the underlying Transport struct in HttpClient, you can do something similar to (sample code for audit service client): The Object Storage service supports multipart uploads to make large object uploads easier by splitting the large object into parts. The Go SDK supports raw multipart upload operations for advanced use cases, as well as a higher level upload class that uses the multipart upload APIs. For links to the APIs used for multipart upload operations, see Managing Multipart Uploads (https://docs.cloud.oracle.com/iaas/Content/Object/Tasks/usingmultipartuploads.htm). Higher level multipart uploads are implemented using the UploadManager, which will: split a large object into parts for you, upload the parts in parallel, and then recombine and commit the parts as a single object in storage. This code sample shows how to use the UploadManager to automatically split an object into parts for upload to simplify interaction with the Object Storage service: https://github.com/oracle/oci-go-sdk/blob/master/example/example_objectstorage_test.go Some response fields are enum-typed. In the future, individual services may return values not covered by existing enums for that field. To address this possibility, every enum-type response field is a modeled as a type that supports any string. Thus if a service returns a value that is not recognized by your version of the SDK, then the response field will be set to this value. When individual services return a polymorphic JSON response not available as a concrete struct, the SDK will return an implementation that only satisfies the interface modeling the polymorphic JSON response. If you are using a version of the SDK released prior to the announcement of a new region, you may need to use a workaround to reach it, depending on whether the region is in the oraclecloud.com realm. A region is a localized geographic area. For more information on regions and how to identify them, see Regions and Availability Domains(https://docs.cloud.oracle.com/iaas/Content/General/Concepts/regions.htm). A realm is a set of regions that share entities. You can identify your realm by looking at the domain name at the end of the network address. For example, the realm for xyz.abc.123.oraclecloud.com is oraclecloud.com. oraclecloud.com Realm: For regions in the oraclecloud.com realm, even if common.Region does not contain the new region, the forward compatibility of the SDK can automatically handle it. You can pass new region names just as you would pass ones that are already defined. For more information on passing region names in the configuration, see Configuring (https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring). For details on common.Region, see (https://github.com/oracle/oci-go-sdk/blob/master/common/common.go). Other Realms: For regions in realms other than oraclecloud.com, you can use the following workarounds to reach new regions with earlier versions of the SDK. NOTE: Be sure to supply the appropriate endpoints for your region. You can overwrite the target host with client.Host: If you are authenticating via instance principals, you can set the authentication endpoint in an environment variable: Got a fix for a bug, or a new feature you'd like to contribute? The SDK is open source and accepting pull requests on GitHub https://github.com/oracle/oci-go-sdk Licensing information available at: https://github.com/oracle/oci-go-sdk/blob/master/LICENSE.txt To be notified when a new version of the Go SDK is released, subscribe to the following feed: https://github.com/oracle/oci-go-sdk/releases.atom Please refer to this link: https://github.com/oracle/oci-go-sdk#help

Package apmgin provides middleware for the Gin framework, for tracing HTTP requests.

Package oauth2 provides support for making OAuth2 authorized and authenticated HTTP requests. It can additionally grant authorization with Bearer JWT.

Package bender makes it easy to build load testing applications for services using protocols like HTTP, Thrift, Protocol Buffers and many others. Bender provides two different approaches to load testing. The first, LoadTestThroughput, gives the tester control over the throughput (QPS), but not over the concurrency (number of goroutines). The second, LoadTestConcurrency, gives the tester control over the concurrency, but not over the throughput. LoadTestThroughput simulates the load caused by concurrent clients sending requests to a service. It can be used to simulate a target throughput (QPS) and to measure the request latency and error rate at that throughput. The load tester will keep spawning goroutines to send requests, even if the service is sending errors or hanging, making this a good way to test the actual behavior of the service under heavy load. This is the same approach used by Twitter's Iago library, and is nearly always the right place to start when load testing services exposed (directly or indirectly) to the Internet. LoadTestConcurrency simulates a fixed number of clients, each of which sends a request, waits for a response and then repeats. The downside to this approach is that increased latency from the service results in decreased throughput from the load tester, as the simulated clients are all waiting for responses. That makes this a poor way to test services, as real-world traffic doesn't behave this way. The best use for this function is to test services that need to handle a lot of concurrent connections, and for which you need to simulate many connections to test resource limits, latency and other metrics. This approach is used by load testers like the Grinder and JMeter, and has been critiqued well by Gil Tene in his talk "How Not To Measure Latency". The next two sections provide more detail on the implementations of LoadTestThroughput and LoadTestConcurrency. The following sections provide descriptions for the common arguments to the load testing functions, and how they work, including the interval generators, request generators, request executors and event recorders. The LoadTestThroughput function takes four arguments. The first is a function that generates nanosecond intervals which are used as request arrival times. The second is a channel of requests. The third is a function that knows how to send a request and validate the response. The inner loop of LoadTestThroughput looks like this: The fourth argument to LoadTestThroughput is a channel which is used to output events. There are events for the start and end of the load test, the sending of each request and the receiving of each response and the wait time between sending requests. The wait message includes an "overage" time which is useful for monitoring the health of the load test program and underlying OS and host. The overage time measures the difference between the expected wait time (the interval time) and the actual wait time. On a heavily loaded host, or when there are long GC pauses, that difference can be large. Bender attempts to compensate for the overage by reducing the subsequent wait times, but under heavy load, the overage will continue to increase until it cannot be compensated for. At that point the wait events will report a monotonically increasing overage which means the load test isn't keeping up with the desired throughput. A load test ends when the request channel is closed and all remaining requests in the channel have been executed. The LoadTestConcurrency function takes four arguments. The first is a semaphore that controls the maximum number of concurrently executing requests, and makes it possible to dynamically control that number over the lifetime of the load test. The second, third and fourth arguments are identical to those for LoadTestThroughput. The inner loop of LoadTestConcurrency does something like this: Reducing the semaphore count will reduce the number of running connections as existing connections complete, so there can be some lag between calling workerSem.Wait(n) and the number of running connections actually decreasing by n. The worker semaphore does not protect you from reducing the number of workers below zero, which will cause undefined behavior from the load tester. As with LoadTestThroughput, the load test ends when the request channel is closed and all remaining requests have been executed. An IntervalGenerator is a function that takes the current Unix epoch time (in nanoseconds) and returns a non-negative time (also in nanoseconds) until the next request should be sent. Bender provides functions to create interval generators for uniform and exponential distributions, each of which takes the target throughput (requests per second) and returns an IntervalGenerator. Neither of the included generators makes use of the function argument, but it is there for cases in which the simulated intervals are time dependent (you want to simulate the daily traffice variation of a web site, for example). The request channel decouples creation of requests from execution of requests and allows them to run concurrently. A typical approach to creating a request channel is code like this: Requests can be generated randomly, read from files (like access logs) or generated any other way you like. The important part is that the request generation be done in a separate goroutine that communicates with the load tester via a channel. In addition, the channel must be closed to indicate that the load test is done. The requests channel should almost certainly be buffered, unless you can generate requests much faster than they are sent (and not just on average). The easiest way to miss your target throughput with LoadTestThroughput is to be blocked waiting for requests to be generated, particularly when testing a large throughput. A request executor is a function that takes the current Unix Epoch time (in nanoseconds) and a *Request, sends the request to the service, waits for the response, optionally validates it and returns an error or nil. This function is timed by the load tester, so it should do as little else as possible, and everything it does will be added to the reported service latency. Here, for example, is a very simple request executor for HTTP requests: The http package in Bender provides a function that generates executors that make use of the http packages Transport and Client classes and provide an easy way to validate the body of the http request. RequestExecutors are called concurrently from multiple goroutines, and must be concurrency-safe. The LoadTestThroughput and LoadTestConcurrency functions both take a channel of events (represented as interface{}) as a parameter. This channel is used to output events as they happen during the load test, including the following events: StartEvent: sent once at the start of the load test. EndEvent: sent once at the end of the load test, no more events are sent after this. WaitEvent: sent only for LoadTestThroughput, see below for details. StartRequestEvent: sent before a request is sent to the service, includes the request and the event time. Note that the event time is not the same as the start time for the request for stupid performance reasons. If you need to know the actual start time, see the EndRequestEvent. EndRequestEvent: sent after a request has finished, includes the response, the actual start and end times for the request and any error returned by the RequestExecutor. The WaitEvent includes the time until the next request is sent (in nanoseconds) and an "overage" time. When the inner loop sleeps, it subtracts the total time slept from the time it intended to sleep, and adds that to the overage. The overage, therefore, is a good proxy for how overloaded the load testing host is. If it grows over time, that means the load test is falling behind, and can't start enough goroutines to run all the requests it needs to. In that case you will need a more powerful load testing host, or need to distribute the load test across more hosts. The event channel doesn't need to be buffered, but it may help if you find that Bender isn't sending as much throughput as you expect. In general, this depends a lot on how quickly you are consuming events from the channel, and how quickly the load tester is running. It is a good practice to proactively buffer this channel.

Package httpgzip provides net/http-like primitives that use gzip compression when serving HTTP requests.

Implements HTTP request and response signing and verification. Supports the major MAC and asymmetric key signature algorithms. It has several safety restrictions: One, none of the widely known non-cryptographically safe algorithms are permitted; Two, the RSA SHA256 algorithms must be available in the binary (and it should, barring export restrictions); Finally, the library assumes either the 'Authorizationn' or 'Signature' headers are to be set (but not both).