Supervisor is a client/server system that allows its users to
control a number of processes on UNIX-like operating systems.
Supervisor has been tested and is known to run on Linux (Ubuntu), Mac OS X
(10.4, 10.5, 10.6), and Solaris (10 for Intel) and FreeBSD 6.1. It will
likely work fine on most UNIX systems.
Supervisor will not run at all under any version of Windows.
Supervisor is intended to work on Python 3 version 3.4 or later
and on Python 2 version 2.7.
-
Files included via the [include]
section are read in sorted order. In
past versions, the order was undefined. Patch by Ionel Cristian Mărieș.
-
supervisorctl start
and supervisorctl stop
now complete more quickly
when handling many processes. Thanks to Chris McDonough for this patch.
See: https://github.com/Supervisor/supervisor/issues/131
-
Environment variables are now expanded for all config file options.
Patch by Dexter Tad-y.
-
Added signalProcess
, signalProcessGroup
, and signalAllProcesses
XML-RPC methods to supervisor RPC interface. Thanks to Casey Callendrello,
Marc Abramowitz, and Moriyoshi Koizumi for the patches.
-
Added signal
command to supervisorctl. Thanks to Moriyoshi Koizumi and
Marc Abramowitz for the patches.
-
Errors caused by bad values in a config file now show the config section
to make debugging easier. Patch by Marc Abramowitz.
-
Setting redirect_stderr=true
in an [eventlistener:x]
section is now
disallowed because any messages written to stderr
would interfere
with the eventlistener protocol on stdout
.
-
Fixed a bug where spawning a process could cause supervisord
to crash
if an IOError
occurred while setting up logging. One way this could
happen is if a log filename was accidentally set to a directory instead
of a file. Thanks to Grzegorz Nosek for reporting this issue.
-
Fixed a bug introduced in 3.1.0 where supervisord
could crash when
attempting to display a resource limit error.
-
Fixed a bug where supervisord
could crash with the message
Assertion failed for processname: RUNNING not in STARTING
if a time
change caused the last start time of the process to be in the future.
Thanks to Róbert Nagy, Sergey Leschenko, and samhair for the patches.
-
A warning is now logged if an eventlistener enters the UNKNOWN state,
which usually indicates a bug in the eventlistener. Thanks to Steve
Winton and detailyang for reporting issues that led to this change.
-
Errors from the web interface are now logged at the ERROR
level.
Previously, they were logged at the TRACE
level and easily
missed. Thanks to Thomas Güttler for reporting this issue.
-
Fixed DeprecationWarning: Parameters to load are deprecated. Call .resolve and .require separately.
on setuptools >= 11.3.
-
If redirect_stderr=true
and stderr_logfile=auto
, no stderr log
file will be created. In previous versions, an empty stderr log file
would be created. Thanks to Łukasz Kożuchowski for the initial patch.
-
Fixed an issue in Medusa that would cause supervisorctl tail -f
to
disconnect if many other supervisorctl
commands were run in parallel.
Patch by Stefan Friesel.
-
The output of the start
, stop
, restart
, and clear
commands
in supervisorctl
has been changed to be consistent with the status
command. Previously, the status
command would show a process like
foo:foo_01
but starting that process would show foo_01: started
(note the group prefix foo:
was missing). Now, starting the process
will show foo:foo_01: started
. Suggested by Chris Wood.
-
The status
command in supervisorctl
now supports group name
syntax: status group:*
.
-
The process column in the table output by the status
command in
supervisorctl
now expands to fit the widest name.
-
The update
command in supervisorctl
now accepts optional group
names. When group names are specified, only those groups will be
updated. Patch by Gary M. Josack.
-
Tab completion in supervisorctl
has been improved and now works for
more cases. Thanks to Mathieu Longtin and Marc Abramowitz for the patches.
-
Attempting to start or stop a process group in supervisorctl
with the
group:*
syntax will now show the same error message as the process
syntax if the name does not exist. Previously, it would show a Python
exception. Patch by George Ang.
-
Added new PROCESS_GROUP_ADDED
and PROCESS_GROUP_REMOVED
events.
These events are fired when process groups are added or removed from
Supervisor's runtime configuration when using the add
and remove
commands in supervisorctl
. Patch by Brent Tubbs.
-
Stopping a process in the backoff state now changes it to the stopped
state. Previously, an attempt to stop a process in backoff would be
ignored. Patch by Pascal Varet.
-
The directory
option is now expanded separately for each process in
a homogeneous process group. This allows each process to have its own
working directory. Patch by Perttu Ranta-aho.
-
Removed setuptools
from the requires
list in setup.py
because
it caused installation issues on some systems.
-
Fixed a bug in Medusa where the HTTP Basic authorizer would cause an
exception if the password contained a colon. Thanks to Thomas Güttler
for reporting this issue.
-
Fixed an XML-RPC bug where calling supervisor.clearProcessLogs() with a
name like group:*
would cause a 500 Internal Server Error rather than
returning a BAD_NAME fault.
-
Fixed a hang that could occur in supervisord
if log rotation is used
and an outside program deletes an active log file. Patch by Magnus Lycka.
-
A warning is now logged if a glob pattern in an [include]
section does
not match any files. Patch by Daniel Hahler.
-
Added a new file, PLUGINS.rst
, with a listing of third-party plugins
for Supervisor. Contributed by Jens Rantil.
-
The pid
command in supervisorctl can now be used to retrieve the PIDs
of child processes. See help pid
. Patch by Gregory Wisniewski.
-
Added a new host_node_name
expansion that will be expanded to the
value returned by Python's platform.node
(see
http://docs.python.org/library/platform.html#platform.node).
Patch by Joseph Kondel.
-
Fixed a bug in the web interface where pages over 64K would be truncated.
Thanks to Drew Perttula and Timothy Jones for reporting this.
-
Renamed README.txt
to README.rst
so GitHub renders the file as
ReStructuredText.
-
The XML-RPC server is now compatible with clients that do not send empty
when there are no parameters for the method call. Thanks to
Johannes Becker for reporting this.
-
Fixed supervisorctl --help
output to show the correct program name.
-
The behavior of the configuration options minfds
and minprocs
has
changed. Previously, if a hard limit was less than minfds
or
minprocs
, supervisord would unconditionally abort with an error. Now,
supervisord will attempt to raise the hard limit. This may succeed if
supervisord is run as root, otherwise the error is printed as before.
Patch by Benoit Sigoure.
-
Add a boolean program option killasgroup
, defaulting to false,
if true when resorting to send SIGKILL to stop/terminate the process
send it to its whole process group instead to take care of possible
children as well and not leave them behind. Patch by Samuele Pedroni.
-
Environment variables may now be used in the configuration file
for options that support string expansion. Patch by Aleksey Sivokon.
-
Fixed a race condition where supervisord might not act on a signal sent
to it. Thanks to Adar Dembo for reporting the issue and supplying the
initial patch.
-
Updated the output of echo_supervisord_conf
to fix typos and
improve comments. Thanks to Jens Rantil for noticing these.
-
Fixed a possible 500 Server Error from the web interface. This was
observed when using Supervisor on a domain socket behind Nginx, where
Supervisor would raise an exception because REMOTE_ADDR was not set.
Patch by David Bennett.
-
Use rich comparison methods rather than cmp to sort process configs and
process group configs to better straddle Python versions. (thanks to
Jonathan Riboux for identifying the problem and supplying an initial
patch).
-
Fixed test_supervisorctl.test_maintail_dashf test for Python 2.7. (thanks
to Jonathan Riboux for identifying the problem and supplying an initial
patch).
-
Fixed the way that supervisor.datatypes.url computes a "good" URL
for compatibility with Python 2.7 and Python >= 2.6.5. URLs with
bogus "schemes://" will now be accepted as a version-straddling
compromise (before they were rejected before supervisor would
start). (thanks to Jonathan Riboux for identifying the problem
and supplying an initial patch).
-
Add a -v
/ --version
option to supervisord: Print the
supervisord version number out to stdout and exit. (Roger Hoover)
-
Import iterparse from xml.etree when available (eg: Python 2.6). Patch
by Sidnei da Silva.
-
Fixed the url to the supervisor-users mailing list. Patch by
Sidnei da Silva
-
When parsing "environment=" in the config file, changes introduced in
3.0a8 prevented Supervisor from parsing some characters commonly
found in paths unless quoting was used as in this example::
environment=HOME='/home/auser'
Supervisor once again allows the above line to be written as::
environment=HOME=/home/auser
Alphanumeric characters, "_", "/", ".", "+", "-", "(", ")", and ":" can all
be used as a value without quoting. If any other characters are needed in
the value, please quote it as in the first example above. Thanks to Paul
Heideman for reporting this issue.
-
Supervisor will now look for its config file in locations relative to the
executable path, allowing it to be used more easily in virtual
environments. If sys.argv[0] is /path/to/venv/bin/supervisorctl
,
supervisor will now look for it's config file in
/path/to/venv/etc/supervisord.conf
and
/path/to/venv/supervisord.conf
in addition to the other standard
locations. Patch by Chris Rossi.
-
Don't cleanup file descriptors on first supervisord invocation:
this is a lame workaround for Snow Leopard systems that use
libdispatch and are receiving "Illegal instruction" messages at
supervisord startup time. Restarting supervisord via
"supervisorctl restart" may still cause a crash on these systems.
-
Got rid of Medusa hashbang headers in various files to ease RPM
packaging.
-
Allow umask to be 000 (patch contributed by Rowan Nairn).
-
Fixed a bug introduced in 3.0a7 where supervisorctl wouldn't ask
for a username/password combination properly from a
password-protected supervisord if it wasn't filled in within the
"[supervisorctl]" section username/password values. It now
properly asks for a username and password.
-
Fixed a bug introduced in 3.0a7 where setup.py would not detect the
Python version correctly. Patch by Daniele Paolella.
-
Fixed a bug introduced in 3.0a7 where parsing a string of key/value
pairs failed on Python 2.3 due to use of regular expression syntax
introduced in Python 2.4.
-
Removed the test suite for the memmon
console script, which was
moved to the Superlance package in 3.0a7.
-
Added release dates to CHANGES.txt.
-
Reloading the config for an fcgi process group did not close the fcgi
socket - now, the socket is closed whenever the group is stopped as a unit
(including during config update). However, if you stop all the processes
in a group individually, the socket will remain open to allow for graceful
restarts of FCGI daemons. (Roger Hoover)
-
Rereading the config did not pick up changes to the socket parameter in a
fcgi-program section. (Roger Hoover)
-
Made a more friendly exception message when a FCGI socket cannot be
created. (Roger Hoover)
-
Fixed a bug where the --serverurl option of supervisorctl would not
accept a URL with a "unix" scheme. (Jason Kirtland)
-
Running the tests now requires the "mock" package. This dependency has
been added to "tests_require" in setup.py. (Roger Hoover)
-
Added support for setting the ownership and permissions for an FCGI socket.
This is done using new "socket_owner" and "socket_mode" options in an
[fcgi-program:x] section. See the manual for details. (Roger Hoover)
-
Fixed a bug where the FCGI socket reference count was not getting
decremented on spawn error. (Roger Hoover)
-
Fixed a Python 2.6 deprecation warning on use of the "sha" module.
-
Updated ez_setup.py to one that knows about setuptools 0.6c11.
-
Running "supervisorctl shutdown" no longer dumps a Python backtrace
when it can't connect to supervisord on the expected socket. Thanks
to Benjamin Smith for reporting this.
-
Removed use of collections.deque in our bundled version of asynchat
because it broke compatibility with Python 2.3.
-
The sample configuration output by "echo_supervisord_conf" now correctly
shows the default for "autorestart" as "unexpected". Thanks to
William Dode for noticing it showed the wrong value.
-
We now bundle our own patched version of Medusa contributed by Jason
Kirtland to allow Supervisor to run on Python 2.6. This was done
because Python 2.6 introduced backwards incompatible changes to
asyncore and asynchat in the stdlib.
-
The console script memmon
, introduced in Supervisor 3.0a4, has
been moved to Superlance (http://pypi.python.org/pypi/superlance).
The Superlance package contains other useful monitoring tools designed
to run under Supervisor.
-
Supervisorctl now correctly interprets all of the error codes that can
be returned when starting a process. Patch by Francesc Alted.
-
New stdout_events_enabled
and stderr_events_enabled
config options
have been added to the [program:x]
, [fcgi-program:x]
, and
[eventlistener:x]
sections. These enable the emitting of new
PROCESS_LOG events for a program. If unspecified, the default is False.
If enabled for a subprocess, and data is received from the stdout or
stderr of the subprocess while not in the special capture mode used by
PROCESS_COMMUNICATION, an event will be emitted.
Event listeners can subscribe to either PROCESS_LOG_STDOUT or
PROCESS_LOG_STDERR individually, or PROCESS_LOG for both.
-
Values for subprocess environment variables specified with environment=
in supervisord.conf can now be optionally quoted, allowing them to
contain commas. Patch by Tim Godfrey.
-
Added a new event type, REMOTE_COMMUNICATION, that is emitted by a new
RPC method, supervisor.sendRemoteCommEvent().
-
Patch for bug #268 (KeyError on here
expansion for
stdout/stderr_logfile) from David E. Kindred.
-
Add reread
, update
, and avail
commands based on Anders
Quist's online_config_reload.diff
patch. This patch extends
the "add" and "drop" commands with automagical behavior::
In supervisorctl:
supervisor> status
bar RUNNING pid 14864, uptime 18:03:42
baz RUNNING pid 23260, uptime 0:10:16
foo RUNNING pid 14866, uptime 18:03:42
gazonk RUNNING pid 23261, uptime 0:10:16
supervisor> avail
bar in use auto 999:999
baz in use auto 999:999
foo in use auto 999:999
gazonk in use auto 999:999
quux avail auto 999:999
Now we add this to our conf:
[group:zegroup]
programs=baz,gazonk
Then we reread conf:
supervisor> reread
baz: disappeared
gazonk: disappeared
quux: available
zegroup: available
supervisor> avail
bar in use auto 999:999
foo in use auto 999:999
quux avail auto 999:999
zegroup:baz avail auto 999:999
zegroup:gazonk avail auto 999:999
supervisor> status
bar RUNNING pid 14864, uptime 18:04:18
baz RUNNING pid 23260, uptime 0:10:52
foo RUNNING pid 14866, uptime 18:04:18
gazonk RUNNING pid 23261, uptime 0:10:52
The magic make-it-so command:
supervisor> update
baz: stopped
baz: removed process group
gazonk: stopped
gazonk: removed process group
zegroup: added process group
quux: added process group
supervisor> status
bar RUNNING pid 14864, uptime 18:04:43
foo RUNNING pid 14866, uptime 18:04:43
quux RUNNING pid 23561, uptime 0:00:02
zegroup:baz RUNNING pid 23559, uptime 0:00:02
zegroup:gazonk RUNNING pid 23560, uptime 0:00:02
supervisor> avail
bar in use auto 999:999
foo in use auto 999:999
quux in use auto 999:999
zegroup:baz in use auto 999:999
zegroup:gazonk in use auto 999:999
-
Fix bug with symptom "KeyError: 'process_name'" when using a logfile name
including documentedprocess_name
Python string expansions.
-
Tab completions in the supervisorctl shell, and a foreground mode for
Supervisor, implemented as a part of GSoC. The supervisorctl program now
has a fg
command, which makes it possible to supply inputs to a
process, and see its output/error stream in real time.
-
Process config reloading implemented by Anders Quist. The
supervisorctl program now has the commands "add" and "drop".
"add " adds the process group implied by
in the config file. "drop " removes the process
group from the running configuration (it must already be stopped).
This makes it possible to add processes to and remove processes from
a running supervisord without restarting the supervisord process.
-
Fixed a bug where opening the HTTP servers would fail silently
for socket errors other than errno.EADDRINUSE.
-
Thanks to Dave Peticolas, using "reload" against a supervisord
that is running in the background no longer causes supervisord
to crash.
-
Configuration options for logfiles now accept mixed case reserved
words (e.g. "AUTO" or "auto") for consistency with other options.
-
childutils.eventdata was buggy, it could not deal with carriage returns
in data. See http://www.plope.com/software/collector/257. Thanks
to Ian Bicking.
-
Per-process exitcodes= configuration now will not accept exit
codes that are not 8-bit unsigned integers (supervisord will not
start when one of the exit codes is outside the range of 0 - 255).
-
Per-process directory
value can now contain expandable values like
%(here)s
. (See http://www.plope.com/software/collector/262).
-
Accepted patch from Roger Hoover to allow for a new sort of
process group: "fcgi-program". Adding one of these to your
supervisord.conf allows you to control fastcgi programs. FastCGI
programs cannot belong to heterogenous groups.
The configuration for FastCGI programs is the same as regular programs
except an additional "socket" parameter. Substitution happens on the
socket parameter with the here
and program_name
variables::
[fcgi-program:fcgi_test]
;socket=tcp://localhost:8002
socket=unix:///path/to/fcgi/socket
-
Supervisorctl now supports a plugin model for supervisorctl
commands.
-
Added the ability to retrieve supervisord's own pid through
supervisor.getPID() on the XML-RPC interface or a new
"pid" command on supervisorctl.
-
3.0a3 broke Python 2.3 backwards compatibility.
-
On Debian Sarge, one user reported that a call to
options.mktempfile would fail with an "[Errno 9] Bad file
descriptor" at supervisord startup time. I was unable to
reproduce this, but we found a workaround that seemed to work for
him and it's included in this release. See
http://www.plope.com/software/collector/252 for more information.
Thanks to William Dode.
-
The fault ALREADY_TERMINATED
has been removed. It was only raised by
supervisor.sendProcessStdin(). That method now returns NOT_RUNNING
for parity with the other methods. (Mike Naberezny)
-
The fault TIMED_OUT has been removed. It was not used.
-
Supervisor now depends on meld3 0.6.4, which does not compile its
C extensions by default, so there is no more need to faff around
with NO_MELD3_EXTENSION_MODULES during installation if you don't
have a C compiler or the Python development libraries on your
system.
-
Instead of making a user root around for the sample.conf file,
provide a convenience command "echo_supervisord_conf", which he can
use to echo the sample.conf to his terminal (and redirect to a file
appropriately). This is a new user convenience (especially one who
has no Python experience).
-
Added numprocs_start
config option to [program:x]
and
[eventlistener:x]
sections. This is an offset used to compute
the first integer that numprocs
will begin to start from.
Contributed by Antonio Beamud Montero.
-
Added capability for [include]
config section to config format.
This section must contain a single key "files", which must name a
space-separated list of file globs that will be included in
supervisor's configuration. Contributed by Ian Bicking.
-
Invoking the reload
supervisorctl command could trigger a bug in
supervisord which caused it to crash. See
http://www.plope.com/software/collector/253 . Thanks to William Dode for
a bug report.
-
The pidproxy
script was made into a console script.
-
The password
value in both the [inet_http_server]
and
[unix_http_server]
sections can now optionally be specified as a SHA
hexdigest instead of as cleartext. Values prefixed with {SHA}
will be
considered SHA hex digests. To encrypt a password to a form suitable for
pasting into the configuration file using Python, do, e.g.::
import sha
'{SHA}' + sha.new('thepassword').hexdigest()
'{SHA}82ab876d1387bfafe46cc1c8a2ef074eae50cb1d'
-
The subtypes of the events PROCESS_STATE_CHANGE (and
PROCESS_STATE_CHANGE itself) have been removed, replaced with a
simpler set of PROCESS_STATE subscribable event types.
The new event types are:
PROCESS_STATE_STOPPED
PROCESS_STATE_EXITED
PROCESS_STATE_STARTING
PROCESS_STATE_STOPPING
PROCESS_STATE_BACKOFF
PROCESS_STATE_FATAL
PROCESS_STATE_RUNNING
PROCESS_STATE_UNKNOWN
PROCESS_STATE # abstract
PROCESS_STATE_STARTING replaces:
PROCESS_STATE_CHANGE_STARTING_FROM_STOPPED
PROCESS_STATE_CHANGE_STARTING_FROM_BACKOFF
PROCESS_STATE_CHANGE_STARTING_FROM_EXITED
PROCESS_STATE_CHANGE_STARTING_FROM_FATAL
PROCESS_STATE_RUNNING replaces
PROCESS_STATE_CHANGE_RUNNING_FROM_STARTED
PROCESS_STATE_BACKOFF replaces
PROCESS_STATE_CHANGE_BACKOFF_FROM_STARTING
PROCESS_STATE_STOPPING replaces:
PROCESS_STATE_CHANGE_STOPPING_FROM_RUNNING
PROCESS_STATE_CHANGE_STOPPING_FROM_STARTING
PROCESS_STATE_EXITED replaces
PROCESS_STATE_CHANGE_EXITED_FROM_RUNNING
PROCESS_STATE_STOPPED replaces
PROCESS_STATE_CHANGE_STOPPED_FROM_STOPPING
PROCESS_STATE_FATAL replaces
PROCESS_STATE_CHANGE_FATAL_FROM_BACKOFF
PROCESS_STATE_UNKNOWN replaces PROCESS_STATE_CHANGE_TO_UNKNOWN
PROCESS_STATE replaces PROCESS_STATE_CHANGE
The PROCESS_STATE_CHANGE_EXITED_OR_STOPPED abstract event is gone.
All process state changes have at least "processname",
"groupname", and "from_state" (the name of the previous state) in
their serializations.
PROCESS_STATE_EXITED additionally has "expected" (1 or 0) and "pid"
(the process id) in its serialization.
PROCESS_STATE_RUNNING, PROCESS_STATE_STOPPING,
PROCESS_STATE_STOPPED additionally have "pid" in their
serializations.
PROCESS_STATE_STARTING and PROCESS_STATE_BACKOFF have "tries" in
their serialization (initially "0", bumped +1 each time a start
retry happens).
-
Remove documentation from README.txt, point people to
http://supervisord.org/manual/ .
-
The eventlistener request/response protocol has changed. OK/FAIL
must now be wrapped in a RESULT envelope so we can use it for more
specialized communications.
Previously, to signify success, an event listener would write the string
OK\n
to its stdout. To signify that the event was seen but couldn't
be handled by the listener and should be rebuffered, an event listener
would write the string FAIL\n
to its stdout.
In the new protocol, the listener must write the string::
RESULT {resultlen}\n{result}
For example, to signify OK::
RESULT 2\nOK
To signify FAIL::
RESULT 4\nFAIL
See the scripts/sample_eventlistener.py script for an example.
-
To provide a hook point for custom results returned from event
handlers (see above) the [eventlistener:x] configuration sections
now accept a "result_handler=" parameter,
e.g. "result_handler=supervisor.dispatchers:default_handler" (the
default) or "handler=mypackage:myhandler". The keys are pkgutil
"entry point" specifications (importable Python function names).
Result handlers must be callables which accept two arguments: one
named "event" which represents the event, and the other named
"result", which represents the listener's result. A result
handler either executes successfully or raises an exception. If
it raises a supervisor.dispatchers.RejectEvent exception, the
event will be rebuffered, and the eventhandler will be placed back
into the ACKNOWLEDGED state. If it raises any other exception,
the event handler will be placed in the UNKNOWN state. If it does
not raise any exception, the event is considered successfully
processed. A result handler's return value is ignored. Writing a
result handler is a "in case of emergency break glass" sort of
thing, it is not something to be used for arbitrary business code.
In particular, handlers must not block for any appreciable
amount of time.
The standard eventlistener result handler
(supervisor.dispatchers:default_handler) does nothing if it receives an
"OK" and will raise a supervisor.dispatchers.RejectEvent exception if it
receives any other value.
-
Supervisord now emits TICK events, which happen every N seconds.
Three types of TICK events are available: TICK_5 (every five
seconds), TICK_60 (every minute), TICK_3600 (every hour). Event
listeners may subscribe to one of these types of events to perform
every-so-often processing. TICK events are subtypes of the EVENT
type.
-
Get rid of OSX platform-specific memory monitor and replace with
memmon.py, which works on both Linux and Mac OS. This script is
now a console script named "memmon".
-
Allow "web handler" (the handler which receives http requests from
browsers visiting the web UI of supervisor) to deal with POST requests.
-
RPC interface methods stopProcess(), stopProcessGroup(), and
stopAllProcesses() now take an optional "wait" argument that defaults
to True for parity with the start methods.
-
Supervisorctl now reports a better error message when the main supervisor
XML-RPC namespace is not registered. Thanks to Mike Orr for reporting
this. (Mike Naberezny)
-
Create scripts
directory within supervisor package, move
pidproxy.py
there, and place sample event listener and comm event
programs within the directory.
-
When an event notification is buffered (either because a listener rejected
it or because all listeners were busy when we attempted to send it
originally), we now rebuffer it in a way that will result in it being
retried earlier than it used to be.
-
When a listener process exits (unexpectedly) before transitioning from the
BUSY state, rebuffer the event that was being processed.
-
supervisorctl tail
command now accepts a trailing specifier: stderr
or stdout
, which respectively, allow a user to tail the stderr or
stdout of the named process. When this specifier is not provided, tail
defaults to stdout.
-
supervisor clear
command now clears both stderr and stdout logs for the
given process.
-
When a process encounters a spawn error as a result of a failed execve or
when it cannot setuid to a given uid, it now puts this info into the
process' stderr log rather than its stdout log.
-
The event listener protocol header now contains the server
identifier,
the pool
that the event emanated from, and the poolserial
as well
as the values it previously contained (version, event name, serial, and
length). The server identifier is taken from the config file options value
identifier
, the pool
value is the name of the listener pool that
this event emanates from, and the poolserial
is a serial number
assigned to the event local to the pool that is processing it.
-
The event listener protocol header is now a sequence of key-value
pairs rather than a list of positional values. Previously, a
representative header looked like::
SUPERVISOR3.0 PROCESS_COMMUNICATION_STDOUT 30 22\n
Now it looks like::
ver:3.0 server:supervisor serial:21 ...
-
Specific event payload serializations have changed. All event
types that deal with processes now include the pid of the process
that the event is describing. In event serialization "header"
values, we've removed the space between the header name and the
value and headers are now separated by a space instead of a line
feed. The names of keys in all event types have had underscores
removed.
-
Abandon the use of the Python stdlib logging
module for speed
and cleanliness purposes. We've rolled our own.
-
Fix crash on start if AUTO logging is used with a max_bytes of
zero for a process.
-
Improve process communication event performance.
-
The process config parameters stdout_capturefile
and
stderr_capturefile
are no longer valid. They have been replaced with
the stdout_capture_maxbytes
and stderr_capture_maxbytes
parameters,
which are meant to be suffix-multiplied integers. They both default to
zero. When they are zero, process communication event capturing is not
performed. When either is nonzero, the value represents the maximum number
of bytes that will be captured between process event start and end tags.
This change was to support the fact that we no longer keep capture data in
a separate file, we just use a FIFO in RAM to maintain capture info. For
users whom don't care about process communication events, or whom haven't
changed the defaults for stdout_capturefile
or stderr_capturefile
,
they needn't do anything to their configurations to deal with this change.
-
Log message levels have been normalized. In particular, process
stdin/stdout is now logged at debug
level rather than at trace
level (trace
level is now reserved for output useful typically for
debugging supervisor itself). See "Supervisor Log Levels" in the
documentation for more info.
-
When an event is rebuffered (because all listeners are busy or a
listener rejected the event), the rebuffered event is now inserted
in the head of the listener event queue. This doesn't guarantee
event emission in natural ordering, because if a listener rejects
an event or dies while it's processing an event, it can take an
arbitrary amount of time for the event to be rebuffered, and other
events may be processed in the meantime. But if pool listeners
never reject an event or don't die while processing an event, this
guarantees that events will be emitted in the order that they were
received because if all listeners are busy, the rebuffered event
will be tried again "first" on the next go-around.
-
Removed EVENT_BUFFER_OVERFLOW event type.
-
The supervisorctl xmlrpc proxy can now communicate with
supervisord using a persistent HTTP connection.
-
A new module "supervisor.childutils" was added. This module
provides utilities for Python scripts which act as children of
supervisord. Most notably, it contains an API method
"getRPCInterface" allows you to obtain an xmlrpclib ServerProxy
that is willing to communicate with the parent supervisor. It
also contains utility functions that allow for parsing of
supervisor event listener protocol headers. A pair of scripts
(loop_eventgen.py and loop_listener.py) were added to the script
directory that serve as examples about how to use the childutils
module.
-
A new envvar is added to child process environments:
SUPERVISOR_SERVER_URL. This contains the server URL for the
supervisord running the child.
-
An OK
URL was added at /ok.html
which just returns the string
OK
(can be used for up checks or speed checks via plain-old-HTTP).
-
An additional command-line option --profile_options
is accepted
by the supervisord script for developer use::
supervisord -n -c sample.conf --profile_options=cumulative,calls
The values are sort_stats options that can be passed to the
standard Python profiler's PStats sort_stats method.
When you exit supervisor, it will print Python profiling output to
stdout.
-
If cElementTree is installed in the Python used to invoke
supervisor, an alternate (faster, by about 2X) XML parser will be
used to parse XML-RPC request bodies. cElementTree was added as
an "extras_require" option in setup.py.
-
Added the ability to start, stop, and restart process groups to
supervisorctl. To start a group, use start groupname:*
. To start
multiple groups, use start groupname1:* groupname2:*
. Equivalent
commands work for "stop" and "restart". You can mix and match short
processnames, fully-specified group:process names, and groupsplats on the
same line for any of these commands.
-
Added directory
option to process config. If you set this
option, supervisor will chdir to this directory before executing
the child program (and thus it will be the child's cwd).
-
Added umask
option to process config. If you set this option,
supervisor will set the umask of the child program. (Thanks to
Ian Bicking for the suggestion).
-
A pair of scripts osx_memmon_eventgen.py
and `osx_memmon_listener.pyhave been added to the scripts directory. If they are used together as described in their comments, processes which are consuming "too much" memory will be restarted. The
eventgen`` script only works on OSX (my
main development platform) but it should be trivially generalizable to
other operating systems.
-
The long form --configuration
(-c) command line option for
supervisord was broken. Reported by Mike Orr. (Mike Naberezny)
-
New log level: BLAT (blather). We log all
supervisor-internal-related debugging info here. Thanks to Mike
Orr for the suggestion.
-
We now allow supervisor to listen on both a UNIX domain socket and an inet
socket instead of making them mutually exclusive. As a result, the options
"http_port", "http_username", "http_password", "sockchmod" and "sockchown"
are no longer part of the [supervisord]
section configuration. These
have been supplanted by two other sections: [unix_http_server]
and
[inet_http_server]
. You'll need to insert one or the other (depending
on whether you want to listen on a UNIX domain socket or a TCP socket
respectively) or both into your supervisord.conf file. These sections have
their own options (where applicable) for port, username, password, chmod,
and chown. See README.txt for more information about these sections.
-
All supervisord command-line options related to "http_port",
"http_username", "http_password", "sockchmod" and "sockchown" have
been removed (see above point for rationale).
-
The option that used to be sockchown
within the [supervisord]
section (and is now named chown
within the [unix_http_server]
section) used to accept a dot-separated user.group value. The separator
now must be a colon ":", e.g. "user:group". Unices allow for dots in
usernames, so this change is a bugfix. Thanks to Ian Bicking for the bug
report.
-
If a '-c' option is not specified on the command line, both supervisord and
supervisorctl will search for one in the paths ./supervisord.conf
,
./etc/supervisord.conf
(relative to the current working dir when
supervisord or supervisorctl is invoked) or in /etc/supervisord.conf
(the old default path). These paths are searched in order, and supervisord
and supervisorctl will use the first one found. If none are found,
supervisor will fail to start.
-
The Python string expression %(here)s
(referring to the directory in
which the configuration file was found) can be used within the
following sections/options within the config file::
unix_http_server:file
supervisor:directory
supervisor:logfile
supervisor:pidfile
supervisor:childlogdir
supervisor:environment
program:environment
program:stdout_logfile
program:stderr_logfile
program:process_name
program:command
-
The --environment
aka -b
option was removed from the list of
available command-line switches to supervisord (use "A=1 B=2
bin/supervisord" instead).
-
If the socket filename (the tail-end of the unix:// URL) was
longer than 64 characters, supervisorctl would fail with an
encoding error at startup.
-
The identifier
command-line argument was not functional.
-
Fixed http://www.plope.com/software/collector/215 (bad error
message in supervisorctl when program command not found on PATH).
-
Some child processes may not have been shut down properly at
supervisor shutdown time.
-
Move to ZPL-derived (but not ZPL) license available from
http://www.repoze.org/LICENSE.txt; it's slightly less restrictive
than the ZPL (no servicemark clause).
-
Spurious errors related to unclosed files ("bad file descriptor",
typically) were evident at supervisord "reload" time (when using
the "reload" command from supervisorctl).
-
We no longer bundle ez_setup to bootstrap setuptools installation.
-
Fixed the README.txt example for defining the supervisor RPC
interface in the configuration file. Thanks to Drew Perttula.
-
Fixed a bug where process communication events would not have the
proper payload if the payload data was very short.
-
when supervisord attempted to kill a process with SIGKILL after
the process was not killed within "stopwaitsecs" using a "normal"
kill signal, supervisord would crash with an improper
AssertionError. Thanks to Calvin Hendryx-Parker.
-
On Linux, Supervisor would consume too much CPU in an effective
"busywait" between the time a subprocess exited and the time at
which supervisor was notified of its exit status. Thanks to Drew
Perttula.
-
RPC interface behavior change: if the RPC method
"sendProcessStdin" is called against a process that has closed its
stdin file descriptor (e.g. it has done the equivalent of
"sys.stdin.close(); os.close(0)"), we return a NO_FILE fault
instead of accepting the data.
-
Changed the semantics of the process configuration autorestart
parameter with respect to processes which move between the RUNNING and
EXITED state. autorestart
was previously a boolean. Now it's a
trinary, accepting one of false
, unexpected
, or true
. If it's
false
, a process will never be automatically restarted from the EXITED
state. If it's unexpected
, a process that enters the EXITED state will
be automatically restarted if it exited with an exit code that was not
named in the process config's exitcodes
list. If it's true
, a
process that enters the EXITED state will be automatically restarted
unconditionally. The default is now unexpected
(it was previously
true
). The readdition of this feature is a reversion of the behavior
change note in the changelog notes for 3.0a1 that asserted we never cared
about the process' exit status when determining whether to restart it or
not.
-
setup.py develop (and presumably setup.py install) would fail under Python
2.3.3, because setuptools attempted to import splituser
from urllib2,
and it didn't exist.
-
It's now possible to use setup.py install
and setup.py develop
on
systems which do not have a C compiler if you set the environment variable
"NO_MELD3_EXTENSION_MODULES=1" in the shell in which you invoke these
commands (versions of meld3 > 0.6.1 respect this envvar and do not try to
compile optional C extensions when it's set).
-
The test suite would fail on Python versions <= 2.3.3 because
the "assertTrue" and "assertFalse" methods of unittest.TestCase
didn't exist in those versions.
-
The supervisorctl
and supervisord
wrapper scripts were disused in
favor of using setuptools' console_scripts
entry point settings.
-
Documentation files and the sample configuration file are put into
the generated supervisor egg's doc
directory.
-
Using the web interface would cause fairly dramatic memory
leakage. We now require a version of meld3 that does not appear
to leak memory from its C extensions (0.6.3).
-
Default config file comment documented 10 secs as default for startsecs
value in process config, in reality it was 1 sec. Thanks to Christoph
Zwerschke.
-
Make note of subprocess environment behavior in README.txt.
Thanks to Christoph Zwerschke.
-
New "strip_ansi" config file option attempts to strip ANSI escape
sequences from logs for smaller/more readable logs (submitted by
Mike Naberezny).
-
The XML-RPC method supervisor.getVersion() has been renamed for
clarity to supervisor.getAPIVersion(). The old name is aliased
for compatibility but is deprecated and will be removed in a
future version (Mike Naberezny).
-
Improved web interface styling (Mike Naberezny, Derek DeVries)
-
The XML-RPC method supervisor.startProcess() now checks that
the file exists and is executable (Mike Naberezny).
-
Two environment variables, "SUPERVISOR_PROCESS_NAME" and
"SUPERVISOR_PROCESS_GROUP" are set in the environment of child
processes, representing the name of the process and group in
supervisor's configuration.
-
Process state map change: a process may now move directly from the
STARTING state to the STOPPING state (as a result of a stop
request).
-
Behavior change: if autorestart
is true, even if a process exits with
an "expected" exit code, it will still be restarted. In the immediately
prior release of supervisor, this was true anyway, and no one complained,
so we're going to consider that the "officially correct" behavior from now
on.
-
Supervisor now logs subprocess stdout and stderr independently.
The old program config keys "logfile", "logfile_backups" and
"logfile_maxbytes" are superseded by "stdout_logfile",
"stdout_logfile_backups", and "stdout_logfile_maxbytes". Added
keys include "stderr_logfile", "stderr_logfile_backups", and
"stderr_logfile_maxbytes". An additional "redirect_stderr" key is
used to cause program stderr output to be sent to its stdout
channel. The keys "log_stderr" and "log_stdout" have been
removed.
-
[program:x]
config file sections now represent "homogeneous process
groups" instead of single processes. A "numprocs" key in the section
represents the number of processes that are in the group. A "process_name"
key in the section allows composition of the each process' name within the
homogeneous group.
-
A new kind of config file section, [group:x]
now exists, allowing users
to group heterogeneous processes together into a process group that can be
controlled as a unit from a client.
-
Supervisord now emits "events" at certain points in its normal
operation. These events include supervisor state change events,
process state change events, and "process communication events".
-
A new kind of config file section [eventlistener:x]
now exists. Each
section represents an "event listener pool", which is a special kind of
homogeneous process group. Each process in the pool is meant to receive
supervisor "events" via its stdin and perform some notification (e.g. send
a mail, log, make an http request, etc.)
-
Supervisord can now capture data between special tokens in
subprocess stdout/stderr output and emit a "process communications
event" as a result.
-
Supervisor's XML-RPC interface may be extended arbitrarily by programmers.
Additional top-level namespace XML-RPC interfaces can be added using the
[rpcinterface:foo]
declaration in the configuration file.
-
New supervisor
-namespace XML-RPC methods have been added:
getAPIVersion (returns the XML-RPC API version, the older
"getVersion" is now deprecated), "startProcessGroup" (starts all
processes in a supervisor process group), "stopProcessGroup"
(stops all processes in a supervisor process group), and
"sendProcessStdin" (sends data to a process' stdin file
descriptor).
-
supervisor
-namespace XML-RPC methods which previously accepted
ony a process name as "name" (startProcess, stopProcess,
getProcessInfo, readProcessLog, tailProcessLog, and
clearProcessLog) now accept a "name" which may contain both the
process name and the process group name in the form
groupname:procname
. For backwards compatibility purposes,
"simple" names will also be accepted but will be expanded
internally (e.g. if "foo" is sent as a name, it will be expanded
to "foo:foo", representing the foo process within the foo process
group).
-
2.X versions of supervisorctl will work against supervisor 3.0
servers in a degraded fashion, but 3.X versions of supervisorctl
will not work at all against supervisor 2.X servers.
Initial release.