Facts API

The ActiveFacts API is a Ruby DSL for managing constellations of elementary facts. Each fact is either existential (a value or an entity), characteristic (boolean) or binary relational (A rel B). Relational facts are consistently co-referenced, so you can traverse them efficiently in any direction. Each constellation maintains constraints over the fact population.

Lookout Lookout is a unit testing framework for Ruby¹ that puts your results in focus. Tests (expectations) are written as follows expect 2 do 1 + 1 end expect ArgumentError do Integer('1 + 1') end expect Array do [1, 2, 3].select{ |i| i % 2 == 0 } end expect [2, 4, 6] do [1, 2, 3].map{ |i| i * 2 } end Lookout is designed to encourage – force, even – unit testing best practices such as • Setting up only one expectation per test • Not setting expectations on non-public APIs • Test isolation This is done by • Only allowing one expectation to be set per test • Providing no (additional) way of accessing private state • Providing no setup and tear-down methods, nor a method of providing test helpers Other important points are • Putting the expected outcome of a test in focus with the steps of the calculation of the actual result only as a secondary concern • A focus on code readability by providing no mechanism for describing an expectation other than the code in the expectation itself • A unified syntax for setting up both state-based and behavior-based expectations The way Lookout works has been heavily influenced by expectations², by {Jay Fields}³. The code base was once also heavily based on expectations, based at Subversion {revision 76}⁴. A lot has happened since then and all of the work past that revision are due to {Nikolai Weibull}⁵. ¹ Ruby: http://ruby-lang.org/ ² Expectations: http://expectations.rubyforge.org/ ³ Jay Fields’s blog: http://blog.jayfields.com/ ⁴ Lookout revision 76: https://github.com/now/lookout/commit/537bedf3e5b3eb4b31c066b3266f42964ac35ebe ⁵ Nikolai Weibull’s home page: http://disu.se/ § Installation Install Lookout with % gem install lookout § Usage Lookout allows you to set expectations on an object’s state or behavior. We’ll begin by looking at state expectations and then take a look at expectations on behavior. § Expectations on State: Literals An expectation can be made on the result of a computation: expect 2 do 1 + 1 end Most objects, in fact, have their state expectations checked by invoking ‹#==› on the expected value with the result as its argument. Checking that a result is within a given range is also simple: expect 0.099..0.101 do 0.4 - 0.3 end Here, the more general ‹#===› is being used on the ‹Range›. § Regexps ‹Strings› of course match against ‹Strings›: expect 'ab' do 'abc'[0..1] end but we can also match a ‹String› against a ‹Regexp›: expect %r{a substring} do 'a string with a substring' end (Note the use of ‹%r{…}› to avoid warnings that will be generated when Ruby parses ‹expect /…/›.) § Modules Checking that the result includes a certain module is done by expecting the ‹Module›. expect Enumerable do [] end This, due to the nature of Ruby, of course also works for classes (as they are also modules): expect String do 'a string' end This doesn’t hinder us from expecting the actual ‹Module› itself: expect Enumerable do Enumerable end or the ‹Class›: expect String do String end for obvious reasons. As you may have figured out yourself, this is accomplished by first trying ‹#==› and, if it returns ‹false›, then trying ‹#===› on the expected ‹Module›. This is also true of ‹Ranges› and ‹Regexps›. § Booleans Truthfulness is expected with ‹true› and ‹false›: expect true do 1 end expect false do nil end Results equaling ‹true› or ‹false› are slightly different: expect TrueClass do true end expect FalseClass do false end The rationale for this is that you should only care if the result of a computation evaluates to a value that Ruby considers to be either true or false, not the exact literals ‹true› or ‹false›. § IO Expecting output on an IO object is also common: expect output("abc\ndef\n") do |io| io.puts 'abc', 'def' end This can be used to capture the output of a formatter that takes an output object as a parameter. § Warnings Expecting warnings from code isn’t very common, but should be done: expect warning('this is your final one!') do warn 'this is your final one!' end expect warning('this is your final one!') do warn '%s:%d: warning: this is your final one!' % [__FILE__, __LINE__] end ‹$VERBOSE› is set to ‹true› during the execution of the block, so you don’t need to do so yourself. If you have other code that depends on the value of $VERBOSE, that can be done with ‹#with_verbose› expect nil do with_verbose nil do $VERBOSE end end § Errors You should always be expecting errors from – and in, but that’s a different story – your code: expect ArgumentError do Integer('1 + 1') end Often, not only the type of the error, but its description, is important to check: expect StandardError.new('message') do raise StandardError.new('message') end As with ‹Strings›, ‹Regexps› can be used to check the error description: expect StandardError.new(/mess/) do raise StandardError.new('message') end § Queries Through Symbols Symbols are generally matched against symbols, but as a special case, symbols ending with ‹?› are seen as expectations on the result of query methods on the result of the block, given that the method is of zero arity and that the result isn’t a Symbol itself. Simply expect a symbol ending with ‹?›: expect :empty? do [] end To expect it’s negation, expect the same symbol beginning with ‹not_›: expect :not_nil? do [1, 2, 3] end This is the same as expect true do [].empty? end and expect false do [1, 2, 3].empty? end but provides much clearer failure messages. It also makes the expectation’s intent a lot clearer. § Queries By Proxy There’s also a way to make the expectations of query methods explicit by invoking methods on the result of the block. For example, to check that the even elements of the Array ‹[1, 2, 3]› include ‹1› you could write expect result.to.include? 1 do [1, 2, 3].reject{ |e| e.even? } end You could likewise check that the result doesn’t include 2: expect result.not.to.include? 2 do [1, 2, 3].reject{ |e| e.even? } end This is the same as (and executes a little bit slower than) writing expect false do [1, 2, 3].reject{ |e| e.even? }.include? 2 end but provides much clearer failure messages. Given that these two last examples would fail, you’d get a message saying “[1, 2, 3]#include?(2)” instead of the terser “true≠false”. It also clearly separates the actual expectation from the set-up. The keyword for this kind of expectations is ‹result›. This may be followed by any of the methods • ‹#not› • ‹#to› • ‹#be› • ‹#have› or any other method you will want to call on the result. The methods ‹#to›, ‹#be›, and ‹#have› do nothing except improve readability. The ‹#not› method inverts the expectation. § Literal Literals If you need to literally check against any of the types of objects otherwise treated specially, that is, any instances of • ‹Module› • ‹Range› • ‹Regexp› • ‹Exception› • ‹Symbol›, given that it ends with ‹?› you can do so by wrapping it in ‹literal(…)›: expect literal(:empty?) do :empty? end You almost never need to do this, as, for all but symbols, instances will match accordingly as well. § Expectations on Behavior We expect our objects to be on their best behavior. Lookout allows you to make sure that they are. Reception expectations let us verify that a method is called in the way that we expect it to be: expect mock.to.receive.to_str(without_arguments){ '123' } do |o| o.to_str end Here, ‹#mock› creates a mock object, an object that doesn’t respond to anything unless you tell it to. We tell it to expect to receive a call to ‹#to_str› without arguments and have ‹#to_str› return ‹'123'› when called. The mock object is then passed in to the block so that the expectations placed upon it can be fulfilled. Sometimes we only want to make sure that a method is called in the way that we expect it to be, but we don’t care if any other methods are called on the object. A stub object, created with ‹#stub›, expects any method and returns a stub object that, again, expects any method, and thus fits the bill. expect stub.to.receive.to_str(without_arguments){ '123' } do |o| o.to_str if o.convertable? end You don’t have to use a mock object to verify that a method is called: expect Object.to.receive.name do Object.name end As you have figured out by now, the expected method call is set up by calling ‹#receive› after ‹#to›. ‹#Receive› is followed by a call to the method to expect with any expected arguments. The body of the expected method can be given as the block to the method. Finally, an expected invocation count may follow the method. Let’s look at this formal specification in more detail. The expected method arguments may be given in a variety of ways. Let’s introduce them by giving some examples: expect mock.to.receive.a do |m| m.a end Here, the method ‹#a› must be called with any number of arguments. It may be called any number of times, but it must be called at least once. If a method must receive exactly one argument, you can use ‹Object›, as the same matching rules apply for arguments as they do for state expectations: expect mock.to.receive.a(Object) do |m| m.a 0 end If a method must receive a specific argument, you can use that argument: expect mock.to.receive.a(1..2) do |m| m.a 1 end Again, the same matching rules apply for arguments as they do for state expectations, so the previous example expects a call to ‹#a› with 1, 2, or the Range 1..2 as an argument on ‹m›. If a method must be invoked without any arguments you can use ‹without_arguments›: expect mock.to.receive.a(without_arguments) do |m| m.a end You can of course use both ‹Object› and actual arguments: expect mock.to.receive.a(Object, 2, Object) do |m| m.a nil, 2, '3' end The body of the expected method may be given as the block. Here, calling ‹#a› on ‹m› will give the result ‹1›: expect mock.to.receive.a{ 1 } do |m| raise 'not 1' unless m.a == 1 end If no body has been given, the result will be a stub object. To take a block, grab a block parameter and ‹#call› it: expect mock.to.receive.a{ |&b| b.call(1) } do |m| j = 0 m.a{ |i| j = i } raise 'not 1' unless j == 1 end To simulate an ‹#each›-like method, ‹#call› the block several times. Invocation count expectations can be set if the default expectation of “at least once” isn’t good enough. The following expectations are possible • ‹#at_most_once› • ‹#once› • ‹#at_least_once› • ‹#twice› And, for a given ‹N›, • ‹#at_most(N)› • ‹#exactly(N)› • ‹#at_least(N)› § Utilities: Stubs Method stubs are another useful thing to have in a unit testing framework. Sometimes you need to override a method that does something a test shouldn’t do, like access and alter bank accounts. We can override – stub out – a method by using the ‹#stub› method. Let’s assume that we have an ‹Account› class that has two methods, ‹#slips› and ‹#total›. ‹#Slips› retrieves the bank slips that keep track of your deposits to the ‹Account› from a database. ‹#Total› sums the ‹#slips›. In the following test we want to make sure that ‹#total› does what it should do without accessing the database. We therefore stub out ‹#slips› and make it return something that we can easily control. expect 6 do |m| stub(Class.new{ def slips raise 'database not available' end def total slips.reduce(0){ |m, n| m.to_i + n.to_i } end }.new, :slips => [1, 2, 3]){ |account| account.total } end To make it easy to create objects with a set of stubbed methods there’s also a convenience method: expect 3 do s = stub(:a => 1, :b => 2) s.a + s.b end This short-hand notation can also be used for the expected value: expect stub(:a => 1, :b => 2).to.receive.a do |o| o.a + o.b end and also works for mock objects: expect mock(:a => 2, :b => 2).to.receive.a do |o| o.a + o.b end Blocks are also allowed when defining stub methods: expect 3 do s = stub(:a => proc{ |a, b| a + b }) s.a(1, 2) end If need be, we can stub out a specific method on an object: expect 'def' do stub('abc', :to_str => 'def'){ |a| a.to_str } end The stub is active during the execution of the block. § Overriding Constants Sometimes you need to override the value of a constant during the execution of some code. Use ‹#with_const› to do just that: expect 'hello' do with_const 'A::B::C', 'hello' do A::B::C end end Here, the constant ‹A::B::C› is set to ‹'hello'› during the execution of the block. None of the constants ‹A›, ‹B›, and ‹C› need to exist for this to work. If a constant doesn’t exist it’s created and set to a new, empty, ‹Module›. The value of ‹A::B::C›, if any, is restored after the block returns and any constants that didn’t previously exist are removed. § Overriding Environment Variables Another thing you often need to control in your tests is the value of environment variables. Depending on such global values is, of course, not a good practice, but is often unavoidable when working with external libraries. ‹#With_env› allows you to override the value of environment variables during the execution of a block by giving it a ‹Hash› of key/value pairs where the key is the name of the environment variable and the value is the value that it should have during the execution of that block: expect 'hello' do with_env 'INTRO' => 'hello' do ENV['INTRO'] end end Any overridden values are restored and any keys that weren’t previously a part of the environment are removed when the block returns. § Overriding Globals You may also want to override the value of a global temporarily: expect 'hello' do with_global :$stdout, StringIO.new do print 'hello' $stdout.string end end You thus provide the name of the global and a value that it should take during the execution of a block of code. The block gets passed the overridden value, should you need it: expect true do with_global :$stdout, StringIO.new do |overridden| $stdout != overridden end end § Integration Lookout can be used from Rake¹. Simply install Lookout-Rake²: % gem install lookout-rake and add the following code to your Rakefile require 'lookout-rake-3.0' Lookout::Rake::Tasks::Test.new Make sure to read up on using Lookout-Rake for further benefits and customization. ¹ Read more about Rake at http://rake.rubyforge.org/ ² Get information on Lookout-Rake at http://disu.se/software/lookout-rake/ § API Lookout comes with an API¹ that let’s you create things such as new expected values, difference reports for your types, and so on. ¹ See http://disu.se/software/lookout/api/ § Interface Design The default output of Lookout can Spartanly be described as Spartan. If no errors or failures occur, no output is generated. This is unconventional, as unit testing frameworks tend to dump a lot of information on the user, concerning things such as progress, test count summaries, and flamboyantly colored text telling you that your tests passed. None of this output is needed. Your tests should run fast enough to not require progress reports. The lack of output provides you with the same amount of information as reporting success. Test count summaries are only useful if you’re worried that your tests aren’t being run, but if you worry about that, then providing such output doesn’t really help. Testing your tests requires something beyond reporting some arbitrary count that you would have to verify by hand anyway. When errors or failures do occur, however, the relevant information is output in a format that can easily be parsed by an ‹'errorformat'› for Vim or with {Compilation Mode}¹ for Emacs². Diffs are generated for Strings, Arrays, Hashes, and I/O. ¹ Read up on Compilation mode for Emacs at http://www.emacswiki.org/emacs/CompilationMode ² Visit The GNU Foundation’s Emacs’ software page at http://www.gnu.org/software/emacs/ § External Design Let’s now look at some of the points made in the introduction in greater detail. Lookout only allows you to set one expectation per test. If you’re testing behavior with a reception expectation, then only one method-invocation expectation can be set. If you’re testing state, then only one result can be verified. It may seem like this would cause unnecessary duplication between tests. While this is certainly a possibility, when you actually begin to try to avoid such duplication you find that you often do so by improving your interfaces. This kind of restriction tends to encourage the use of value objects, which are easy to test, and more focused objects, which require simpler tests, as they have less behavior to test, per method. By keeping your interfaces focused you’re also keeping your tests focused. Keeping your tests focused improves, in itself, test isolation, but let’s look at something that hinders it: setup and tear-down methods. Most unit testing frameworks encourage test fragmentation by providing setup and tear-down methods. Setup methods create objects and, perhaps, just their behavior for a set of tests. This means that you have to look in two places to figure out what’s being done in a test. This may work fine for few methods with simple set-ups, but makes things complicated when the number of tests increases and the set-up is complex. Often, each test further adjusts the previously set-up object before performing any verifications, further complicating the process of figuring out what state an object has in a given test. Tear-down methods clean up after tests, perhaps by removing records from a database or deleting files from the file-system. The duplication that setup methods and tear-down methods hope to remove is better avoided by improving your interfaces. This can be done by providing better set-up methods for your objects and using idioms such as {Resource Acquisition Is Initialization}¹ for guaranteed clean-up, test or no test. By not using setup and tear-down methods we keep everything pertinent to a test in the test itself, thus improving test isolation. (You also won’t {slow down your tests}² by keeping unnecessary state.) Most unit test frameworks also allow you to create arbitrary test helper methods. Lookout doesn’t. The same rationale as that that has been crystallized in the preceding paragraphs applies. If you need helpers you’re interface isn’t good enough. It really is as simple as that. To clarify: there’s nothing inherently wrong with test helper methods, but they should be general enough that they reside in their own library. The support for mocks in Lookout is provided through a set of test helper methods that make it easier to create mocks than it would have been without them. Lookout-rack³ is another example of a library providing test helper methods (well, one method, actually) that are very useful in testing web applications that use Rack⁴. A final point at which some unit test frameworks try to fragment tests further is documentation. These frameworks provide ways of describing the whats and hows of what’s being tested, the rationale being that this will provide documentation of both the test and the code being tested. Describing how a stack data structure is meant to work is a common example. A stack is, however, a rather simple data structure, so such a description provides little, if any, additional information that can’t be extracted from the implementation and its tests themselves. The implementation and its tests is, in fact, its own best documentation. Taking the points made in the previous paragraphs into account, we should already have simple, self-describing, interfaces that have easily understood tests associated with them. Rationales for the use of a given data structure or system-design design documentation is better suited in separate documentation focused at describing exactly those issues. ¹ Read the Wikipedia entry for Resource Acquisition Is Initialization at http://en.wikipedia.org/wiki/Resource_Acquisition_Is_Initialization ² Read how 37signals had problems with slow Test::Unit tests at http://37signals.com/svn/posts/2742-the-road-to-faster-tests/ ³ Visit the Lookout-rack home page at http://disu.se/software/lookout-rack/ ⁴ Visit the Rack Rubyforge project page at http://rack.rubyforge.org/ § Internal Design The internal design of Lookout has had a couple of goals. • As few external dependencies as possible • As few internal dependencies as possible • Internal extensibility provides external extensibility • As fast load times as possible • As high a ratio of value objects to mutable objects as possible • Each object must have a simple, obvious name • Use mix-ins, not inheritance for shared behavior • As few responsibilities per object as possible • Optimizing for speed can only be done when you have all the facts § External Dependencies Lookout used to depend on Mocha for mocks and stubs. While benchmarking I noticed that a method in Mocha was taking up more than 300 percent of the runtime. It turned out that Mocha’s method for cleaning up back-traces generated when a mock failed was doing something incredibly stupid: backtrace.reject{ |l| Regexp.new(@lib).match(File.expand_path(l)) } Here ‹@lib› is a ‹String› containing the path to the lib sub-directory in the Mocha installation directory. I reported it, provided a patch five days later, then waited. Nothing happened. {254 days later}¹, according to {Wolfram Alpha}², half of my patch was, apparently – I say “apparently”, as I received no notification – applied. By that time I had replaced the whole mocking-and-stubbing subsystem and dropped the dependency. Many Ruby developers claim that Ruby and its gems are too fast-moving for normal package-managing systems to keep up. This is testament to the fact that this isn’t the case and that the real problem is instead related to sloppy practices. Please note that I don’t want to single out the Mocha library nor its developers. I only want to provide an example where relying on external dependencies can be “considered harmful”. ¹ See the Wolfram Alpha calculation at http://www.wolframalpha.com/input/?i=days+between+march+17%2C+2010+and+november+26%2C+2010 ² Check out the Wolfram Alpha computational knowledge engine at http://www.wolframalpha.com/ § Internal Dependencies Lookout has been designed so as to keep each subsystem independent of any other. The diff subsystem is, for example, completely decoupled from any other part of the system as a whole and could be moved into its own library at a time where that would be of interest to anyone. What’s perhaps more interesting is that the diff subsystem is itself very modular. The data passes through a set of filters that depends on what kind of diff has been requested, each filter yielding modified data as it receives it. If you want to read some rather functional Ruby I can highly recommend looking at the code in the ‹lib/lookout/diff› directory. This lookout on the design of the library also makes it easy to extend Lookout. Lookout-rack was, for example, written in about four hours and about 5 of those 240 minutes were spent on setting up the interface between the two. § Optimizing For Speed The following paragraph is perhaps a bit personal, but might be interesting nonetheless. I’ve always worried about speed. The original Expectations library used ‹extend› a lot to add new behavior to objects. Expectations, for example, used to hold the result of their execution (what we now term “evaluation”) by being extended by a module representing success, failure, or error. For the longest time I used this same method, worrying about the increased performance cost that creating new objects for results would incur. I finally came to a point where I felt that the code was so simple and clean that rewriting this part of the code for a benchmark wouldn’t take more than perhaps ten minutes. Well, ten minutes later I had my results and they confirmed that creating new objects wasn’t harming performance. I was very pleased. § Naming I hate low lines (underscores). I try to avoid them in method names and I always avoid them in file names. Since the current “best practice” in the Ruby community is to put ‹BeginEndStorage› in a file called ‹begin_end_storage.rb›, I only name constants using a single noun. This has had the added benefit that classes seem to have acquired less behavior, as using a single noun doesn’t allow you to tack on additional behavior without questioning if it’s really appropriate to do so, given the rather limited range of interpretation for that noun. It also seems to encourage the creation of value objects, as something named ‹Range› feels a lot more like a value than ‹BeginEndStorage›. (To reach object-oriented-programming Nirvana you must achieve complete value.) § News § 3.0.0 The ‹xml› expectation has been dropped. It wasn’t documented, didn’t suit very many use cases, and can be better implemented by an external library. The ‹arg› argument matcher for mock method arguments has been removed, as it didn’t provide any benefit over using Object. The ‹#yield› and ‹#each› methods on stub and mock methods have been removed. They were slightly weird and their use case can be implemented using block parameters instead. The ‹stub› method inside ‹expect› blocks now stubs out the methods during the execution of a provided block instead of during the execution of the whole except block. When a mock method is called too many times, this is reported immediately, with a full backtrace. This makes it easier to pin down what’s wrong with the code. Query expectations were added. Explicit query expectations were added. Fluent boolean expectations, for example, ‹expect nil.to.be.nil?› have been replaced by query expectations (‹expect :nil? do nil end›) and explicit query expectations (‹expect result.to.be.nil? do nil end›). This was done to discourage creating objects as the expected value and creating objects that change during the course of the test. The ‹literal› expectation was added. Equality (‹#==›) is now checked before “caseity” (‹#===›) for modules, ranges, and regular expressions to match the documentation. § Financing Currently, most of my time is spent at my day job and in my rather busy private life. Please motivate me to spend time on this piece of software by donating some of your money to this project. Yeah, I realize that requesting money to develop software is a bit, well, capitalistic of me. But please realize that I live in a capitalistic society and I need money to have other people give me the things that I need to continue living under the rules of said society. So, if you feel that this piece of software has helped you out enough to warrant a reward, please PayPal a donation to now@disu.se¹. Thanks! Your support won’t go unnoticed! ¹ Send a donation: https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=now%40disu%2ese&item_name=Lookout § Reporting Bugs Please report any bugs that you encounter to the {issue tracker}¹. ¹ See https://github.com/now/lookout/issues § Contributors Contributors to the original expectations codebase are mentioned there. We hope no one on that list feels left out of this list. Please {let us know}¹ if you do. • Nikolai Weibull ¹ Add an issue to the Lookout issue tracker at https://github.com/now/lookout/issues § Licensing Lookout is free software: you may redistribute it and/or modify it under the terms of the {GNU Lesser General Public License, version 3}¹ or later², as published by the {Free Software Foundation}³. ¹ See http://disu.se/licenses/lgpl-3.0/ ² See http://gnu.org/licenses/ ³ See http://fsf.org/

Open Food Facts API Wrapper, the open database about food.

Mingle 3.3 introduced a new Events API in the form of an "Atom feed":http://www.thoughtworks-studios.com/mingle/3.3/help/mingle_api_events.html. The Mingle team and ThoughtWorks Studios are big believers in the use of Atom for exposing events. Atom is a widely used standard, and this event API style puts the issue of robust event delivery in the hands of the consumer, where it belongs. In fact, we'd argue this is the only feasible means of robust, scalable event delivery, short of spending hundreds of thousands or millions of dollars on enterprise buses and such. Atom-delivered events are cheap, scalable, standards-based, and robust. However, we do accept that asking integrators wishing to consume events to implement polling is not ideal. Writing polling consumers can be tedious. And this tedium gets in the way of writing sweet Mingle integrations. We are addressing this by publishing libraries such as this, which if effective, fully hide the mechanics of event polling from the consumer. The consumer only need worry about the processing of events. Said processing is modeled in the style of 'pipes and filters.'

A fast, lightweight framework to parse, extract information from XBRL Instance, Taxonomy and Linkbase documents. xbrlware understands structure and relationship among elements of XBRL documents and defines a set of APIs for accessing financial & business facts, meta & other related information defined in XBRL documents.

This is the simple REST client for Fact Check Tools API V1alpha1. Simple REST clients are Ruby client libraries that provide access to Google services via their HTTP REST API endpoints. These libraries are generated and updated automatically based on the discovery documents published by the service, and they handle most concerns such as authentication, pagination, retry, timeouts, and logging. You can use this client to access the Fact Check Tools API, but note that some services may provide a separate modern client that is easier to use.

Open Beauty Facts API Wrapper, the open database about beauty products.

`fingerpuppet` is a simple library and commandline tool to interact with Puppet's REST API without needing to have Puppet itself installed. This may be integrated, for example, into a provisioning tool to allow your provisioning process to remotely sign certificates of newly built systems. Alternatively, you could use it to request known facts about a node from your Puppet Master, or even to request a catalog for a node to, for example, perform acceptance testing against a new version of Puppet before upgrading your production master. Install the binford2k/fingerpuppet puppet module to get a class that can automatically configure your `auth.conf` file under Puppet Enterprise, where that file is managed.

puppetdb_rundeck is a sinatra based application to provide integration between PuppetDB and Rundeck. It provides an api in either xml, json or yaml that allows the node and fact data with puppetdb to use used as a resource with rundeck

This gem can be used to find nutritional facts for a large variety of common foods. The data is pulled from the Nutritionix API.

A small project intended to make a life with ClearCase a little bit happier. It supplies an intuitive and interactive ClearCase CLI and ClearCase wrapper API.

Lucene.Net is a source code, class-per-class, API-per-API and algorithmatic port of the Java Lucene search engine to the C# and .NET platform utilizing Microsoft .NET Framework. Lucene.Net sticks to the APIs and classes used in the original Java implementation of Lucene. The API names as well as class names are preserved with the intention of giving Lucene.Net the look and feel of the C# language and the .NET Framework. For example, the method Hits.length() in the Java implementation now reads Hits.Length() in the C# port. In addition to the APIs and classes port to C#, the algorithm of Java Lucene is ported to C# Lucene. This means an index created with Java Lucene is back-and-forth compatible with the C# Lucene; both at reading, writing and updating. In fact a Lucene index can be concurrently searched and updated using Java Lucene and C# Lucene processes.

A typical usecase of JWT tokens is when building an API. JWT tokens can be sent as authorization tokens in headers. The advantage of using JWT tokens is that they are signed with a secret, so the information inside them cannot be tampered. This makes them ideal for embeding both authentication and authorization information in one step (e.g. by "decoding" the token, one can get information about the user and the roles a user has in case of a role-based authorization). Also, the fact that expiration timestamps can be embedded in the data of the token and be handled automatically, can be used to easily build short-lived tokens, making an API more secure.

API wrapper for number facts api

A simple fun facts about cats gem

# foundationallib <h2>Finally, a cross-platform, portable, well-designed, secure, robust, maximally-efficient C foundational library &mdash; Making Engineering And Computing Fast, Secure, Responsive And Easy.</h2> <br> <h2><i>Library Uses - What It Does, What It Is, And What It Is A Solution For</i></h2> <ul class="features-list"> <li><strong>Enables better Engineering Solutions and Security broadly and foundationally where Software Creation or Development or Script Creation is concerned - whether this be on a local, business, governmental or international basis, and makes things easier - and Computing in General.</strong> Don't Reinvent the Wheel - Use Good Wheels - Be Safe And Secure.</li> <br> <li><strong>Enables a free-flowing dynamic computer usage that you need, deserve and should have, simply because you have a computer. With full speed and with robustness. You deserve to be able to use your computer wholly and fully, with proper and fast operations.</strong></li> <br><li><strong>Enables flexibility and power - makes C accessible to the masses (and faster and more secure) with easy usage and strives to bring people up, not degrade the character or actions of people.</strong> This is a fundamental and unequivocal philosophy difference between this library and many subsections of Software Engineering and the mainstream engineering establishment. For instance, in Python, you cannot read a file easily &ndash; you have to read it line-by-line or open a file, read the lines, then close it. With this library, you can efficiently read 10,000 files in one function call. This library gives power. Any common operation, there ought to be a powerful function for.<br><br>We should not bitch around with assembly when we don't want to; we should also have full speed. Some old "solutions" deliver neither, then culturally degrade programmers because their tools are bad - actually, it just degrades programmers, and gives them bad tools. COBOL is an example ...<br><br>Human technology is about empowerment &ndash; people must fight for it to be empowerment, we don't have time to have AI systems kill us because we want to have bad tools and be weak. We must fight.</li> </ul> <br> <ul> <h2><i>About Foundationallib</i></h2> <li>→<strong>Cross platform</strong> - works perfectly in embedded, server, desktop, and all platforms - tested for Windows and UNIX - 64-bit and 32-bit, includes a 3-aspect test suite, with more to come.</li> <li>→<strong>Bug free. Reliable. Dependable. Secure. Tested well.</strong></li> <li>→<strong>Zero Overhead</strong> - Only 1 byte due to the power of the error handling, can be configured will full power.</li> <li>→<strong>Static Inline Functions if you want them</strong> (optional) - Eliminating function call overhead to 0 if you wish, for improved performance.</li> <li>→<strong>Custom allocators</strong> - if you want it.</li> <li>→<strong>Custom error handling</strong> - if you want it.</li> <li>→<strong>Safe functions</strong> warn the programmer about NULL values and unused return values. Can be configured to not compile if not Secure. Optional null-check macros in every library function. Does not use any of <code>"gets", "fgets", "strcpy", "strcat", "sprintf", "vsprintf", "scanf", "fscanf", "system", "chown", "chmod", "chgrp", "alloca", "execl", "execle", "execlp", "execv", "execve", "execvp", "bcopy", "bzero"</code>. You can configure it to never use any unsafe functions.</li> <li>→<strong>Portable</strong> - works on all platforms, using platform specific features (using #ifdefs) to make functions better and faster.</li> <li>→<strong>Multithreading support</strong> (optional), with list_comprehension_multithreaded (accepts any number of threads, works in parallel using portable C11 threads)</li> <li>→<strong>Networking support</strong> (optional), using libcurl - making it extremely easy to download websites and arrays of websites - features other languages do not have.</li> <li>→Very good and thorough <strong>Error Handling</strong> and <strong>allocation overflow</strong> checking (good for <strong>Security and Robustness</strong>) in the functions. Allows the programmer to dynamically choose to catch all errors in the functions with a handler (default or custom), or to ignore them. No need to ALWAYS say "if (.....) if you don't want to. Can be changed at runtime.</li> <li>→<strong>Public Domain</strong> so you make the code how you want. (No need to "propitiate" to some "god" of some library).</li> <li>→<strong>Minimal abstractions or indirection of any kind or needless slow things that complicate things</strong> - macros, namespace collision, typedefs, structs, object-orientation messes, slow compilation times, bloat, etc., etc.</li> <li>→<strong>No namespace pollution</strong> - you can generate your <span style=font-style:normal;><b>own version</b></span> with any prefix you like!</li> <li>→<strong>Relies <span style=font-style:normal;>minimally</span> on C libraries - it can be fully decoupled from LIB C and can be statically linked.</strong></li> <li>→<span style=font-style:normal;><b>Very small</b></span> - 13K Lines of Code (including Doxygen comments and following of Best Practices)</li> <li>→<strong>No Linkage Issues or dependency hell</strong></li> <li>→<strong>Thorough and clear documentation</strong>, with examples of usage.</li> <li>→<strong>No licensing restrictions whatsoever - use it for your engineering project, your startup, your Fortune 500 company, your personal project, your throw-away script, your government.</strong></li> <li>→<strong>Makes C like Python or Perl or Ruby in many ways - or more easy</strong></li> <li>→<strong>Easy Straightforward Transpilation Support</strong> - to make current code, much faster - all without any bloat (See transpile_slow_scripting_into_c.rb). <li><h4>In many cases, there is now a direct mapping of functions from other languages into optimized C. See the example script in this repository. This makes optimizing your Python / Perl / Ruby / PHP etc. script very easy, either manually or through the use of AI.</h4></li> </ul> </p> </div> <div class=pane style='border: 0;border-right: 1px dotted rgb(200, 200, 200); background-color: rgb(255, 255, 190);'> <div class="library-details"><h2 style=color:green;><i>Foundationallib Features</i></h2> <p class=feature> <strong>Functional Programming Features</strong> - <code>map, reduce, filter,</code> List Comprehensions in C and much more!</p> <p class=feature><strong>Expands C's Primitives for easy manipulation of data types</strong> such as Arrays, Strings, <code>Dict</code>, <code>Set</code>, <code>FrozenDict</code>, <code>FrozenSet</code> - <strong>and enables easy manipulation, modification, alteration, comparison, sorting, counting, IO (printing) and duplication of these at a very comfortable level</strong> - something very, very rare in C or C++, <i>all without any overhead.</i></p> <p class=feature><strong>More comfortable IO</strong> - read and write entire files with ease, and convert complex types into strings or print them on the screen with ease. </p> <p class=feature><strong>A powerful general purpose Foundational Library</strong> - <i>which has anything and everything you need</i> - from <code>replace_all()</code> to <code>replace_memory()</code> to <code>find_last_of()</code> to to <code>list_comprehension()</code> to <code>shellescape()</code> to <code>read_file_into_string()</code> to <code>string_to_json()</code> to <code>string_to_uppercase()</code> to <code>to_title_case()</code> to <code>read_file_into_array()</code> to <code>read_files_into_array()</code> to <code>map()</code> to <code>reduce()</code> to <code>filter()</code> to <code>list_comprehension_multithreaded()</code> to <code>frozen_dict_new_instance()</code> to <code>backticks()</code> - everything you would want to make quick and optimally efficient C programs, this has it.</p> <div style='height: 1px; border: 0;border-bottom: 1px dashed rgb(200, 200, 200);'></div> <p class=performance><span>Helps to make programs hundreds of times faster than other languages with similar ease of creation.</span> <hr> <p class=feature><strong>Easily take advantage of CPU cores with list_comprehension_multithreaded()</strong>.<br><br>You can specify the number of threads, the transform and the filter functions, and this will transform your data - all in parallel. Don't have a multithreaded environment? Then disable it (set the flag).</p> <hr> <h3>You don't want to be reinventing the wheel and hoping that your memory allocation is secure enough - and then failing. <strong>Security Is Paramount.</strong></h3> <h3>You don't want to be waiting <span style='color:rgb(240, 0, 0);'>a day</span> for an operation to complete when it could take <span style='color:rgb(30, 30, 255);'>less than an hour</span>.</h3> <br><p>This library is founded on very strong and unequivocal goals and philosophy. In fact, I have written many articles about the foundation of this library and more relevantly the broader context. See the Articles folder - for some of the foundation of this library.</p> <br><p>This library is an ideal and a dream - not just a Software Library. As such, I would highly suggest that you support me in this mission. Even if it's different from the status quo. Are you a Rust or Zig fan? Then make a Rust or Zig version of this ideal. Let's go. Give me an email.</p> </div> </div> <br> No Copyright - Public Domain - 2023, Gregory Cohen <gregorycohennew@gmail.com> DONATION REQUEST: If this free software has helped you and you find it valuable, please consider making a donation to support the ongoing development and maintenance of this project. Your contribution helps ensure the availability of this library to the community and encourages further improvements. Donations can be made at: https://www.paypal.com/paypalme/cfoundationallib Note: The best way to contact me is through email, not social media. Please feel very free to email me if you want to express feedback, suggest an improvement, desire to collaborate on this free and open source project, want to support me, or want to create something great. Complacency and obstructionism and whining are not tolerated. I desire to make this library the best theoretically possible, so please, let us connect. <h1>This code is in the public domain, fully. You can do whatever you want with it. See docs.html for API reference.  </h1> <h1>Here's some examples of some things you can do easily with Foundationallib.<br><br> <h3>Use it for scripting purposes...</h3> </h1>  <h1>Take control of the Web - in C.<br><br></h1> 

# foundationallib <h2>Finally, a cross-platform, portable, well-designed, secure, robust, maximally-efficient C foundational library &mdash; Making Engineering And Computing Fast, Secure, Responsive And Easy.</h2> <br> <ul class="features-list"> <li><strong>Enables better Engineering Solutions and Security broadly and foundationally where Software Creation or Development or Script Creation is concerned - whether this be on a local, business, governmental or international basis, and makes things easier - and Computing in General.</strong> Don't Reinvent the Wheel - Use Good Wheels - Be Safe And Secure.</li> <br> <li><strong>Enables a free-flowing dynamic computer usage that you need, deserve and should have, simply because you have a computer. With full speed and with robustness. You deserve to be able to use your computer wholly and fully, with proper and fast operations.</strong></li> <br><li><strong>Enables flexibility and power - makes C accessible to the masses (and faster and more secure) with easy usage and strives to bring people up, not degrade the character or actions of people.</strong> This is a fundamental and unequivocal philosophy difference between this library and many subsections of Software Engineering and the mainstream engineering establishment. For instance, in Python, you cannot read a file easily &ndash; you have to read it line-by-line or open a file, read the lines, then close it. With this library, you can efficiently read 10,000 files in one function call. This library gives power. Any common operation, there ought to be a powerful function for.<br><br>We should not bitch around with assembly when we don't want to; we should also have full speed. Some old "solutions" deliver neither, then culturally degrade programmers because their tools are bad - actually, it just degrades programmers, and gives them bad tools. COBOL is an example ...<br><br>Human technology is about empowerment &ndash; people must fight for it to be empowerment, we don't have time to have AI systems kill us because we want to have bad tools and be weak. We must fight.</li> </ul> <br> <ul> <h2>About Foundationallib</h2> <li>→<strong>Cross platform</strong> - works perfectly in embedded, server, desktop, and all platforms - tested for Windows and UNIX - 64-bit and 32-bit, includes a 3-aspect test suite, with more to come.</li> <li>→<strong>Bug free. Reliable. Dependable. Secure. Tested well.</strong></li> <li>→<strong>Zero Overhead</strong> - Only 1 byte due to the power of the error handling, can be configured will full power.</li> <li>→<strong>Static Inline Functions if you want them</strong> (optional) - Eliminating function call overhead to 0 if you wish, for improved performance.</li> <li>→<strong>Custom allocators</strong> - if you want it.</li> <li>→<strong>Custom error handling</strong> - if you want it.</li> <li>→<strong>Safe functions</strong> warn the programmer about NULL values and unused return values. Can be configured to not compile if not Secure. Optional null-check macros in every library function. Does not use any of <code>"gets", "fgets", "strcpy", "strcat", "sprintf", "vsprintf", "scanf", "fscanf", "system", "chown", "chmod", "chgrp", "alloca", "execl", "execle", "execlp", "execv", "execve", "execvp", "bcopy", "bzero"</code>. You can configure it to never use any unsafe functions.</li> <li>→<strong>Portable</strong> - works on all platforms, using platform specific features (using #ifdefs) to make functions better and faster.</li> <li>→<strong>Multithreading support</strong> (optional), with list_comprehension_multithreaded (accepts any number of threads, works in parallel using portable C11 threads)</li> <li>→<strong>Networking support</strong> (optional), using libcurl - making it extremely easy to download websites and arrays of websites - features other languages do not have.</li> <li>→Very good and thorough <strong>Error Handling</strong> and <strong>allocation overflow</strong> checking (good for <strong>Security and Robustness</strong>) in the functions. Allows the programmer to dynamically choose to catch all errors in the functions with a handler (default or custom), or to ignore them. No need to ALWAYS say "if (.....) if you don't want to. Can be changed at runtime.</li> <li>→<strong>Public Domain</strong> so you make the code how you want. (No need to "propitiate" to some "god" of some library).</li> <li>→<strong>Minimal abstractions or indirection of any kind or needless slow things that complicate things</strong> - macros, namespace collision, typedefs, structs, object-orientation messes, slow compilation times, bloat, etc., etc.</li> <li>→<strong>No namespace pollution</strong> - you can generate your <span style=font-style:normal;><b>own version</b></span> with any prefix you like!</li> <li>→<strong>Relies <span style=font-style:normal;>minimally</span> on C libraries - it can be fully decoupled from LIB C and can be statically linked.</strong></li> <li>→<span style=font-style:normal;><b>Very small</b></span> - 13K Lines of Code (including Doxygen comments and following of Best Practices)</li> <li>→<strong>No Linkage Issues or dependency hell</strong></li> <li>→<strong>Thorough and clear documentation</strong>, with examples of usage.</li> <li>→<strong>No licensing restrictions whatsoever - use it for your engineering project, your startup, your Fortune 500 company, your personal project, your throw-away script, your government.</strong></li> <li>→<strong>Makes C like Python or Perl or Ruby in many ways - or more easy</strong></li> <li>→<strong>Easy Straightforward Transpilation Support</strong> - to make current code, much faster - all without any bloat (See transpile_slow_scripting_into_c.rb). <li><h4>In many cases, there is now a direct mapping of functions from other languages into optimized C. See the example script in this repository. This makes optimizing your Python / Perl / Ruby / PHP etc. script very easy, either manually or through the use of AI.</h4></li> </ul> </p> </div> <div class=pane style='border: 0;border-right: 1px dotted rgb(200, 200, 200); background-color: rgb(255, 255, 190);'> <div class="library-details"><h2 style=color:green;>Foundationallib Features</h2> <p class=feature> <strong>Functional Programming Features</strong> - <code>map, reduce, filter,</code> List Comprehensions in C and much more!</p> <p class=feature><strong>Expands C's Primitives for easy manipulation of data types</strong> such as Arrays, Strings, <code>Dict</code>, <code>Set</code>, <code>FrozenDict</code>, <code>FrozenSet</code> - <strong>and enables easy manipulation, modification, alteration, comparison, sorting, counting, IO (printing) and duplication of these at a very comfortable level</strong> - something very, very rare in C or C++, <i>all without any overhead.</i></p> <p class=feature><strong>More comfortable IO</strong> - read and write entire files with ease, and convert complex types into strings or print them on the screen with ease. </p> <p class=feature><strong>A powerful general purpose Foundational Library</strong> - <i>which has anything and everything you need</i> - from <code>replace_all()</code> to <code>replace_memory()</code> to <code>find_last_of()</code> to to <code>list_comprehension()</code> to <code>shellescape()</code> to <code>read_file_into_string()</code> to <code>string_to_json()</code> to <code>string_to_uppercase()</code> to <code>to_title_case()</code> to <code>read_file_into_array()</code> to <code>read_files_into_array()</code> to <code>map()</code> to <code>reduce()</code> to <code>filter()</code> to <code>list_comprehension_multithreaded()</code> to <code>frozen_dict_new_instance()</code> to <code>backticks()</code> - everything you would want to make quick and optimally efficient C programs, this has it.</p> <div style='height: 1px; border: 0;border-bottom: 1px dashed rgb(200, 200, 200);'></div> <p class=performance><span>Helps to make programs hundreds of times faster than other languages with similar ease of creation.</span> <hr> <p class=feature><strong>Easily take advantage of CPU cores with list_comprehension_multithreaded()</strong>.<br><br>You can specify the number of threads, the transform and the filter functions, and this will transform your data - all in parallel. Don't have a multithreaded environment? Then disable it (set the flag).</p> <hr> <h3>You don't want to be reinventing the wheel and hoping that your memory allocation is secure enough - and then failing. <strong>Security Is Paramount.</strong></h3> <h3>You don't want to be waiting <span style='color:rgb(240, 0, 0);'>a day</span> for an operation to complete when it could take <span style='color:rgb(30, 30, 255);'>less than an hour</span>.</h3> <br><p>This library is founded on very strong and unequivocal goals and philosophy. In fact, I have written many articles about the foundation of this library and more relevantly the broader context. See the Articles folder - for some of the foundation of this library.</p> <br><p>This library is an ideal and a dream - not just a Software Library. As such, I would highly suggest that you support me in this mission. Even if it's different from the status quo. Are you a Rust or Zig fan? Then make a Rust or Zig version of this ideal. Let's go. Give me an email.</p> </div> </div> <br> No Copyright - Public Domain - 2023, Gregory Cohen <gregorycohennew@gmail.com> DONATION REQUEST: If this free software has helped you and you find it valuable, please consider making a donation to support the ongoing development and maintenance of this project. Your contribution helps ensure the availability of this library to the community and encourages further improvements. Donations can be made at: https://www.paypal.com/paypalme/cfoundationallib Note: The best way to contact me is through email, not social media. Please feel very free to email me if you want to express feedback, suggest an improvement, desire to collaborate on this free and open source project, want to support me, or want to create something great. Complacency and obstructionism and whining are not tolerated. I desire to make this library the best theoretically possible, so please, let us connect. <pre><code> Mirror Links Blog - https://foundationallib.wordpress.com/ Github - https://github.com/gregoryc/foundationallib Ruby Gem Mirror - https://rubygems.org/gems/foundational_lib Ruby Gem Mirror - https://rubygems.org/gems/foundational_lib2 Library Instagram - https://www.instagram.com/foundationallib Google Drive Mirrors ZIP - https://drive.google.com/file/d/1bK2njCRsH4waTm4LP16sloPQawk7JIR5/view?usp=sharing TAR.GZ - https://drive.google.com/file/d/1RCA1yy9R3cEqI_X9Lv0fxqh-zgNCK005/view?usp=sharing TAR.BZ2 - https://drive.google.com/file/d/1ljdlI_fEnMS_X5WmuhI1qavhgseWlD5j/view?usp=sharing </code></pre> <h1>This code is in the public domain, fully. You can do whatever you want with it. See docs.html for API reference.  </h1> <h1>Here's some examples of some things you can do easily with Foundationallib.<br><br> <h3>Use it for scripting purposes...</h3> </h1>  <h1>Take control of the Web - in C.<br><br></h1>