Package firecrawl provides a Go client for Firecrawl, the context API for AI agents: search, scrape, parse, crawl, map, interact, agent, and monitor on the v2 API.
Package spanner provides a client for reading and writing to Cloud Spanner databases. See the packages under admin for clients that operate on databases and instances. Note: This package is in beta. Some backwards-incompatible changes may occur. See https://cloud.google.com/spanner/docs/getting-started/go/ for an introduction to Cloud Spanner and additional help on using this API. See https://godoc.org/cloud.google.com/go for authentication, timeouts, connection pooling and similar aspects of this package. To start working with this package, create a client that refers to the database of interest: Remember to close the client after use to free up the sessions in the session pool. Two Client methods, Apply and Single, work well for simple reads and writes. As a quick introduction, here we write a new row to the database and read it back: All the methods used above are discussed in more detail below. Every Cloud Spanner row has a unique key, composed of one or more columns. Construct keys with a literal of type Key: The keys of a Cloud Spanner table are ordered. You can specify ranges of keys using the KeyRange type: By default, a KeyRange includes its start key but not its end key. Use the Kind field to specify other boundary conditions: A KeySet represents a set of keys. A single Key or KeyRange can act as a KeySet. Use the KeySets function to build the union of several KeySets: AllKeys returns a KeySet that refers to all the keys in a table: All Cloud Spanner reads and writes occur inside transactions. There are two types of transactions, read-only and read-write. Read-only transactions cannot change the database, do not acquire locks, and may access either the current database state or states in the past. Read-write transactions can read the database before writing to it, and always apply to the most recent database state. The simplest and fastest transaction is a ReadOnlyTransaction that supports a single read operation. Use Client.Single to create such a transaction. You can chain the call to Single with a call to a Read method. When you only want one row whose key you know, use ReadRow. Provide the table name, key, and the columns you want to read: Read multiple rows with the Read method. It takes a table name, KeySet, and list of columns: Read returns a RowIterator. You can call the Do method on the iterator and pass a callback: RowIterator also follows the standard pattern for the Google Cloud Client Libraries: Always call Stop when you finish using an iterator this way, whether or not you iterate to the end. (Failing to call Stop could lead you to exhaust the database's session quota.) To read rows with an index, use ReadUsingIndex. The most general form of reading uses SQL statements. Construct a Statement with NewStatement, setting any parameters using the Statement's Params map: You can also construct a Statement directly with a struct literal, providing your own map of parameters. Use the Query method to run the statement and obtain an iterator: Once you have a Row, via an iterator or a call to ReadRow, you can extract column values in several ways. Pass in a pointer to a Go variable of the appropriate type when you extract a value. You can extract by column position or name: You can extract all the columns at once: Or you can define a Go struct that corresponds to your columns, and extract into that: For Cloud Spanner columns that may contain NULL, use one of the NullXXX types, like NullString: To perform more than one read in a transaction, use ReadOnlyTransaction: You must call Close when you are done with the transaction. Cloud Spanner read-only transactions conceptually perform all their reads at a single moment in time, called the transaction's read timestamp. Once a read has started, you can call ReadOnlyTransaction's Timestamp method to obtain the read timestamp. By default, a transaction will pick the most recent time (a time where all previously committed transactions are visible) for its reads. This provides the freshest data, but may involve some delay. You can often get a quicker response if you are willing to tolerate "stale" data. You can control the read timestamp selected by a transaction by calling the WithTimestampBound method on the transaction before using it. For example, to perform a query on data that is at most one minute stale, use See the documentation of TimestampBound for more details. To write values to a Cloud Spanner database, construct a Mutation. The spanner package has functions for inserting, updating and deleting rows. Except for the Delete methods, which take a Key or KeyRange, each mutation-building function comes in three varieties. One takes lists of columns and values along with the table name: One takes a map from column names to values: And the third accepts a struct value, and determines the columns from the struct field names: To apply a list of mutations to the database, use Apply: If you need to read before writing in a single transaction, use a ReadWriteTransaction. ReadWriteTransactions may abort and need to be retried. You pass in a function to ReadWriteTransaction, and the client will handle the retries automatically. Use the transaction's BufferWrite method to buffer mutations, which will all be executed at the end of the transaction: Spanner supports DML statements like INSERT, UPDATE and DELETE. Use ReadWriteTransaction.Update to run DML statements. It returns the number of rows affected. (You can call use ReadWriteTransaction.Query with a DML statement. The first call to Next on the resulting RowIterator will return iterator.Done, and the RowCount field of the iterator will hold the number of affected rows.) For large databases, it may be more efficient to partition the DML statement. Use client.PartitionedUpdate to run a DML statement in this way. Not all DML statements can be partitioned. This client has been instrumented to use OpenCensus tracing (http://opencensus.io). To enable tracing, see "Enabling Tracing for a Program" at https://godoc.org/go.opencensus.io/trace. OpenCensus tracing requires Go 1.8 or higher.
Package firestore provides a client for reading and writing to a Cloud Firestore database. See https://cloud.google.com/firestore/docs for an introduction to Cloud Firestore and additional help on using the Firestore API. See https://godoc.org/cloud.google.com/go for authentication, timeouts, connection pooling and similar aspects of this package. Note: you can't use both Cloud Firestore and Cloud Datastore in the same project. To start working with this package, create a client with a project ID: In Firestore, documents are sets of key-value pairs, and collections are groups of documents. A Firestore database consists of a hierarchy of alternating collections and documents, referred to by slash-separated paths like "States/California/Cities/SanFrancisco". This client is built around references to collections and documents. CollectionRefs and DocumentRefs are lightweight values that refer to the corresponding database entities. Creating a ref does not involve any network traffic. Use DocumentRef.Get to read a document. The result is a DocumentSnapshot. Call its Data method to obtain the entire document contents as a map. You can also obtain a single field with DataAt, or extract the data into a struct with DataTo. With the type definition we can extract the document's data into a value of type State: Note that this client supports struct tags beginning with "firestore:" that work like the tags of the encoding/json package, letting you rename fields, ignore them, or omit their values when empty. To retrieve multiple documents from their references in a single call, use Client.GetAll. For writing individual documents, use the methods on DocumentReference. Create creates a new document. The first return value is a WriteResult, which contains the time at which the document was updated. Create fails if the document exists. Another method, Set, either replaces an existing document or creates a new one. To update some fields of an existing document, use Update. It takes a list of paths to update and their corresponding values. Use DocumentRef.Delete to delete a document. You can condition Deletes or Updates on when a document was last changed. Specify these preconditions as an option to a Delete or Update method. The check and the write happen atomically with a single RPC. Here we update a doc only if it hasn't changed since we read it. You could also do this with a transaction. To perform multiple writes at once, use a WriteBatch. Its methods chain for convenience. WriteBatch.Commit sends the collected writes to the server, where they happen atomically. You can use SQL to select documents from a collection. Begin with the collection, and build up a query using Select, Where and other methods of Query. Supported operators include `<`, `<=`, `>`, `>=`, `==`, and 'array-contains'. Call the Query's Documents method to get an iterator, and use it like the other Google Cloud Client iterators. To get all the documents in a collection, you can use the collection itself as a query. Use a transaction to execute reads and writes atomically. All reads must happen before any writes. Transaction creation, commit, rollback and retry are handled for you by the Client.RunTransaction method; just provide a function and use the read and write methods of the Transaction passed to it.
Package spanner provides a client for reading and writing to Cloud Spanner databases. See the packages under admin for clients that operate on databases and instances. Note: This package is in beta. Some backwards-incompatible changes may occur. See https://cloud.google.com/spanner/docs/getting-started/go/ for an introduction to Cloud Spanner and additional help on using this API. See https://godoc.org/cloud.google.com/go for authentication, timeouts, connection pooling and similar aspects of this package. To start working with this package, create a client that refers to the database of interest: Remember to close the client after use to free up the sessions in the session pool. Two Client methods, Apply and Single, work well for simple reads and writes. As a quick introduction, here we write a new row to the database and read it back: All the methods used above are discussed in more detail below. Every Cloud Spanner row has a unique key, composed of one or more columns. Construct keys with a literal of type Key: The keys of a Cloud Spanner table are ordered. You can specify ranges of keys using the KeyRange type: By default, a KeyRange includes its start key but not its end key. Use the Kind field to specify other boundary conditions: A KeySet represents a set of keys. A single Key or KeyRange can act as a KeySet. Use the KeySets function to build the union of several KeySets: AllKeys returns a KeySet that refers to all the keys in a table: All Cloud Spanner reads and writes occur inside transactions. There are two types of transactions, read-only and read-write. Read-only transactions cannot change the database, do not acquire locks, and may access either the current database state or states in the past. Read-write transactions can read the database before writing to it, and always apply to the most recent database state. The simplest and fastest transaction is a ReadOnlyTransaction that supports a single read operation. Use Client.Single to create such a transaction. You can chain the call to Single with a call to a Read method. When you only want one row whose key you know, use ReadRow. Provide the table name, key, and the columns you want to read: Read multiple rows with the Read method. It takes a table name, KeySet, and list of columns: Read returns a RowIterator. You can call the Do method on the iterator and pass a callback: RowIterator also follows the standard pattern for the Google Cloud Client Libraries: Always call Stop when you finish using an iterator this way, whether or not you iterate to the end. (Failing to call Stop could lead you to exhaust the database's session quota.) To read rows with an index, use ReadUsingIndex. The most general form of reading uses SQL statements. Construct a Statement with NewStatement, setting any parameters using the Statement's Params map: You can also construct a Statement directly with a struct literal, providing your own map of parameters. Use the Query method to run the statement and obtain an iterator: Once you have a Row, via an iterator or a call to ReadRow, you can extract column values in several ways. Pass in a pointer to a Go variable of the appropriate type when you extract a value. You can extract by column position or name: You can extract all the columns at once: Or you can define a Go struct that corresponds to your columns, and extract into that: For Cloud Spanner columns that may contain NULL, use one of the NullXXX types, like NullString: To perform more than one read in a transaction, use ReadOnlyTransaction: You must call Close when you are done with the transaction. Cloud Spanner read-only transactions conceptually perform all their reads at a single moment in time, called the transaction's read timestamp. Once a read has started, you can call ReadOnlyTransaction's Timestamp method to obtain the read timestamp. By default, a transaction will pick the most recent time (a time where all previously committed transactions are visible) for its reads. This provides the freshest data, but may involve some delay. You can often get a quicker response if you are willing to tolerate "stale" data. You can control the read timestamp selected by a transaction by calling the WithTimestampBound method on the transaction before using it. For example, to perform a query on data that is at most one minute stale, use See the documentation of TimestampBound for more details. To write values to a Cloud Spanner database, construct a Mutation. The spanner package has functions for inserting, updating and deleting rows. Except for the Delete methods, which take a Key or KeyRange, each mutation-building function comes in three varieties. One takes lists of columns and values along with the table name: One takes a map from column names to values: And the third accepts a struct value, and determines the columns from the struct field names: To apply a list of mutations to the database, use Apply: If you need to read before writing in a single transaction, use a ReadWriteTransaction. ReadWriteTransactions may abort and need to be retried. You pass in a function to ReadWriteTransaction, and the client will handle the retries automatically. Use the transaction's BufferWrite method to buffer mutations, which will all be executed at the end of the transaction: Spanner supports DML statements like INSERT, UPDATE and DELETE. Use ReadWriteTransaction.Update to run DML statements. It returns the number of rows affected. (You can call use ReadWriteTransaction.Query with a DML statement. The first call to Next on the resulting RowIterator will return iterator.Done, and the RowCount field of the iterator will hold the number of affected rows.) For large databases, it may be more efficient to partition the DML statement. Use client.PartitionedUpdate to run a DML statement in this way. Not all DML statements can be partitioned. This client has been instrumented to use OpenCensus tracing (http://opencensus.io). To enable tracing, see "Enabling Tracing for a Program" at https://godoc.org/go.opencensus.io/trace. OpenCensus tracing requires Go 1.8 or higher.
Package spanner provides a client for reading and writing to Cloud Spanner databases. See the packages under admin for clients that operate on databases and instances. Note: This package is in beta. Some backwards-incompatible changes may occur. See https://cloud.google.com/spanner/docs/getting-started/go/ for an introduction to Cloud Spanner and additional help on using this API. See https://godoc.org/cloud.google.com/go for authentication, timeouts, connection pooling and similar aspects of this package. To start working with this package, create a client that refers to the database of interest: Remember to close the client after use to free up the sessions in the session pool. Two Client methods, Apply and Single, work well for simple reads and writes. As a quick introduction, here we write a new row to the database and read it back: All the methods used above are discussed in more detail below. Every Cloud Spanner row has a unique key, composed of one or more columns. Construct keys with a literal of type Key: The keys of a Cloud Spanner table are ordered. You can specify ranges of keys using the KeyRange type: By default, a KeyRange includes its start key but not its end key. Use the Kind field to specify other boundary conditions: A KeySet represents a set of keys. A single Key or KeyRange can act as a KeySet. Use the KeySets function to build the union of several KeySets: AllKeys returns a KeySet that refers to all the keys in a table: All Cloud Spanner reads and writes occur inside transactions. There are two types of transactions, read-only and read-write. Read-only transactions cannot change the database, do not acquire locks, and may access either the current database state or states in the past. Read-write transactions can read the database before writing to it, and always apply to the most recent database state. The simplest and fastest transaction is a ReadOnlyTransaction that supports a single read operation. Use Client.Single to create such a transaction. You can chain the call to Single with a call to a Read method. When you only want one row whose key you know, use ReadRow. Provide the table name, key, and the columns you want to read: Read multiple rows with the Read method. It takes a table name, KeySet, and list of columns: Read returns a RowIterator. You can call the Do method on the iterator and pass a callback: RowIterator also follows the standard pattern for the Google Cloud Client Libraries: Always call Stop when you finish using an iterator this way, whether or not you iterate to the end. (Failing to call Stop could lead you to exhaust the database's session quota.) To read rows with an index, use ReadUsingIndex. The most general form of reading uses SQL statements. Construct a Statement with NewStatement, setting any parameters using the Statement's Params map: You can also construct a Statement directly with a struct literal, providing your own map of parameters. Use the Query method to run the statement and obtain an iterator: Once you have a Row, via an iterator or a call to ReadRow, you can extract column values in several ways. Pass in a pointer to a Go variable of the appropriate type when you extract a value. You can extract by column position or name: You can extract all the columns at once: Or you can define a Go struct that corresponds to your columns, and extract into that: For Cloud Spanner columns that may contain NULL, use one of the NullXXX types, like NullString: To perform more than one read in a transaction, use ReadOnlyTransaction: You must call Close when you are done with the transaction. Cloud Spanner read-only transactions conceptually perform all their reads at a single moment in time, called the transaction's read timestamp. Once a read has started, you can call ReadOnlyTransaction's Timestamp method to obtain the read timestamp. By default, a transaction will pick the most recent time (a time where all previously committed transactions are visible) for its reads. This provides the freshest data, but may involve some delay. You can often get a quicker response if you are willing to tolerate "stale" data. You can control the read timestamp selected by a transaction by calling the WithTimestampBound method on the transaction before using it. For example, to perform a query on data that is at most one minute stale, use See the documentation of TimestampBound for more details. To write values to a Cloud Spanner database, construct a Mutation. The spanner package has functions for inserting, updating and deleting rows. Except for the Delete methods, which take a Key or KeyRange, each mutation-building function comes in three varieties. One takes lists of columns and values along with the table name: One takes a map from column names to values: And the third accepts a struct value, and determines the columns from the struct field names: To apply a list of mutations to the database, use Apply: If you need to read before writing in a single transaction, use a ReadWriteTransaction. ReadWriteTransactions may abort and need to be retried. You pass in a function to ReadWriteTransaction, and the client will handle the retries automatically. Use the transaction's BufferWrite method to buffer mutations, which will all be executed at the end of the transaction: Spanner supports DML statements like INSERT, UPDATE and DELETE. Use ReadWriteTransaction.Update to run DML statements. It returns the number of rows affected. (You can call use ReadWriteTransaction.Query with a DML statement. The first call to Next on the resulting RowIterator will return iterator.Done, and the RowCount field of the iterator will hold the number of affected rows.) For large databases, it may be more efficient to partition the DML statement. Use client.PartitionedUpdate to run a DML statement in this way. Not all DML statements can be partitioned. This client has been instrumented to use OpenCensus tracing (http://opencensus.io). To enable tracing, see "Enabling Tracing for a Program" at https://godoc.org/go.opencensus.io/trace. OpenCensus tracing requires Go 1.8 or higher.
Package logging contains a Stackdriver Logging client suitable for writing logs. For reading logs, and working with sinks, metrics and monitored resources, see package cloud.google.com/go/logging/logadmin. This client uses Logging API v2. See https://cloud.google.com/logging/docs/api/v2/ for an introduction to the API. Note: This package is in beta. Some backwards-incompatible changes may occur. Use a Client to interact with the Stackdriver Logging API. For most use cases, you'll want to add log entries to a buffer to be periodically flushed (automatically and asynchronously) to the Stackdriver Logging service. You should call Client.Close before your program exits to flush any buffered log entries to the Stackdriver Logging service. For critical errors, you may want to send your log entries immediately. LogSync is slow and will block until the log entry has been sent, so it is not recommended for normal use. An entry payload can be a string, as in the examples above. It can also be any value that can be marshaled to a JSON object, like a map[string]interface{} or a struct: If you have a []byte of JSON, wrap it in json.RawMessage: You may want use a standard log.Logger in your program. An Entry may have one of a number of severity levels associated with it. You can view Stackdriver logs for projects at https://console.cloud.google.com/logs/viewer. Use the dropdown at the top left. When running from a Google Cloud Platform VM, select "GCE VM Instance". Otherwise, select "Google Project" and then the project ID. Logs for organizations, folders and billing accounts can be viewed on the command line with the "gcloud logging read" command. To group all the log entries written during a single HTTP request, create two Loggers, a "parent" and a "child," with different log IDs. Both should be in the same project, and have the same MonitoredResouce type and labels. - Parent entries must have HTTPRequest.Request populated. (Strictly speaking, only the URL is necessary.) - A child entry's timestamp must be within the time interval covered by the parent request (i.e., older than parent.Timestamp, and newer than parent.Timestamp - parent.HTTPRequest.Latency, assuming the parent timestamp marks the end of the request. - The trace field must be populated in all of the entries and match exactly. You should observe the child log entries grouped under the parent on the console. The parent entry will not inherit the severity of its children; you must update the parent severity yourself.
Package logging contains a Stackdriver Logging client suitable for writing logs. For reading logs, and working with sinks, metrics and monitored resources, see package cloud.google.com/go/logging/logadmin. This client uses Logging API v2. See https://cloud.google.com/logging/docs/api/v2/ for an introduction to the API. Note: This package is in beta. Some backwards-incompatible changes may occur. Use a Client to interact with the Stackdriver Logging API. For most use cases, you'll want to add log entries to a buffer to be periodically flushed (automatically and asynchronously) to the Stackdriver Logging service. You should call Client.Close before your program exits to flush any buffered log entries to the Stackdriver Logging service. For critical errors, you may want to send your log entries immediately. LogSync is slow and will block until the log entry has been sent, so it is not recommended for normal use. An entry payload can be a string, as in the examples above. It can also be any value that can be marshaled to a JSON object, like a map[string]interface{} or a struct: If you have a []byte of JSON, wrap it in json.RawMessage: You may want use a standard log.Logger in your program. An Entry may have one of a number of severity levels associated with it. You can view Stackdriver logs for projects at https://console.cloud.google.com/logs/viewer. Use the dropdown at the top left. When running from a Google Cloud Platform VM, select "GCE VM Instance". Otherwise, select "Google Project" and then the project ID. Logs for organizations, folders and billing accounts can be viewed on the command line with the "gcloud logging read" command. To group all the log entries written during a single HTTP request, create two Loggers, a "parent" and a "child," with different log IDs. Both should be in the same project, and have the same MonitoredResouce type and labels. - Parent entries must have HTTPRequest.Request populated. (Strictly speaking, only the URL is necessary.) - A child entry's timestamp must be within the time interval covered by the parent request (i.e., older than parent.Timestamp, and newer than parent.Timestamp - parent.HTTPRequest.Latency, assuming the parent timestamp marks the end of the request. - The trace field must be populated in all of the entries and match exactly. You should observe the child log entries grouped under the parent on the console. The parent entry will not inherit the severity of its children; you must update the parent severity yourself.
Package firestore provides a client for reading and writing to a Cloud Firestore database. See https://cloud.google.com/firestore/docs for an introduction to Cloud Firestore and additional help on using the Firestore API. See https://godoc.org/cloud.google.com/go for authentication, timeouts, connection pooling and similar aspects of this package. Note: you can't use both Cloud Firestore and Cloud Datastore in the same project. To start working with this package, create a client with a project ID: In Firestore, documents are sets of key-value pairs, and collections are groups of documents. A Firestore database consists of a hierarchy of alternating collections and documents, referred to by slash-separated paths like "States/California/Cities/SanFrancisco". This client is built around references to collections and documents. CollectionRefs and DocumentRefs are lightweight values that refer to the corresponding database entities. Creating a ref does not involve any network traffic. Use DocumentRef.Get to read a document. The result is a DocumentSnapshot. Call its Data method to obtain the entire document contents as a map. You can also obtain a single field with DataAt, or extract the data into a struct with DataTo. With the type definition we can extract the document's data into a value of type State: Note that this client supports struct tags beginning with "firestore:" that work like the tags of the encoding/json package, letting you rename fields, ignore them, or omit their values when empty. To retrieve multiple documents from their references in a single call, use Client.GetAll. For writing individual documents, use the methods on DocumentReference. Create creates a new document. The first return value is a WriteResult, which contains the time at which the document was updated. Create fails if the document exists. Another method, Set, either replaces an existing document or creates a new one. To update some fields of an existing document, use Update. It takes a list of paths to update and their corresponding values. Use DocumentRef.Delete to delete a document. You can condition Deletes or Updates on when a document was last changed. Specify these preconditions as an option to a Delete or Update method. The check and the write happen atomically with a single RPC. Here we update a doc only if it hasn't changed since we read it. You could also do this with a transaction. To perform multiple writes at once, use a WriteBatch. Its methods chain for convenience. WriteBatch.Commit sends the collected writes to the server, where they happen atomically. You can use SQL to select documents from a collection. Begin with the collection, and build up a query using Select, Where and other methods of Query. Supported operators include `<`, `<=`, `>`, `>=`, `==`, and 'array-contains'. Call the Query's Documents method to get an iterator, and use it like the other Google Cloud Client iterators. To get all the documents in a collection, you can use the collection itself as a query. Use a transaction to execute reads and writes atomically. All reads must happen before any writes. Transaction creation, commit, rollback and retry are handled for you by the Client.RunTransaction method; just provide a function and use the read and write methods of the Transaction passed to it.
Package logging contains a Stackdriver Logging client suitable for writing logs. For reading logs, and working with sinks, metrics and monitored resources, see package cloud.google.com/go/logging/logadmin. This client uses Logging API v2. See https://cloud.google.com/logging/docs/api/v2/ for an introduction to the API. Note: This package is in beta. Some backwards-incompatible changes may occur. Use a Client to interact with the Stackdriver Logging API. For most use cases, you'll want to add log entries to a buffer to be periodically flushed (automatically and asynchronously) to the Stackdriver Logging service. You should call Client.Close before your program exits to flush any buffered log entries to the Stackdriver Logging service. For critical errors, you may want to send your log entries immediately. LogSync is slow and will block until the log entry has been sent, so it is not recommended for normal use. An entry payload can be a string, as in the examples above. It can also be any value that can be marshaled to a JSON object, like a map[string]interface{} or a struct: If you have a []byte of JSON, wrap it in json.RawMessage: You may want use a standard log.Logger in your program. An Entry may have one of a number of severity levels associated with it. You can view Stackdriver logs for projects at https://console.cloud.google.com/logs/viewer. Use the dropdown at the top left. When running from a Google Cloud Platform VM, select "GCE VM Instance". Otherwise, select "Google Project" and then the project ID. Logs for organizations, folders and billing accounts can be viewed on the command line with the "gcloud logging read" command. To group all the log entries written during a single HTTP request, create two Loggers, a "parent" and a "child," with different log IDs. Both should be in the same project, and have the same MonitoredResouce type and labels. - Parent entries must have HTTPRequest.Request populated. (Strictly speaking, only the URL is necessary.) - A child entry's timestamp must be within the time interval covered by the parent request (i.e., older than parent.Timestamp, and newer than parent.Timestamp - parent.HTTPRequest.Latency, assuming the parent timestamp marks the end of the request. - The trace field must be populated in all of the entries and match exactly. You should observe the child log entries grouped under the parent on the console. The parent entry will not inherit the severity of its children; you must update the parent severity yourself.
Package xrpc implements a lightweight customizable XRPC Client. The Client can be used to perform [Client.Query] and [Client.Procedure]. This returns an ErrResponse if the status code is invalid. If the API returns a standard error response, you can use ErrStandardResponse to retrieve it: Then, you can check standard errors with ErrStandard: The ErrStandardResponse already wraps the ErrStandard: you can use errors.Unwrap to get it. You can use the Record interface to define records: This interface can be used with predefined XRPC functions, like GetRecord or ListRecords. When your Record is sent, it is firstly marshaled into a map with MarshalToMap and then marshaled into JSON with json.Marshal. If your Record requires a custom logic to be marshaled, it must implement MapMarshaler and returns a map[string]any. If you define custom objects, it can return anything. When your Record is received, it is unmarshaled with json.Unmarshal. If it requires a custom logic, you must implement json.Unmarshaler. If you want to marshal your Record into a JSON, you must use Marshal. Some endpoint requires Auth. The AuthClient is used to authentificate your requests. Currently, only auth using JWT is supported. You can get a new AuthClient using JWTAuth with the subpackage xrpc/server. XRPC provides CompatClient, a Client that is compatible with lexicons generated by Indigo. It can be safely used as a LexClient while remaining a full Client. If you want to use [Auth] with CompatClient, create a new AuthClient and pass it to NewCompatClient. All requests sent by CompatClient will be authentificated, including them sent by Indigo.
Package sessions provides cookie and filesystem sessions and infrastructure for custom session backends. The key features are: Let's start with an example that shows the sessions API in a nutshell: First we initialize a session store calling NewCookieStore() and passing a secret key used to authenticate the session. Inside the handler, we call store.Get() to retrieve an existing session or a new one. Then we set some session values in session.Values, which is a map[interface{}]interface{}. And finally we call session.Save() to save the session in the response. Note that in production code, we should check for errors when calling session.Save(r, w), and either display an error message or otherwise handle it. Save must be called before writing to the response, otherwise the session cookie will not be sent to the client. That's all you need to know for the basic usage. Let's take a look at other options, starting with flash messages. Flash messages are session values that last until read. The term appeared with Ruby On Rails a few years back. When we request a flash message, it is removed from the session. To add a flash, call session.AddFlash(), and to get all flashes, call session.Flashes(). Here is an example: Flash messages are useful to set information to be read after a redirection, like after form submissions. There may also be cases where you want to store a complex datatype within a session, such as a struct. Sessions are serialised using the encoding/gob package, so it is easy to register new datatypes for storage in sessions: As it's not possible to pass a raw type as a parameter to a function, gob.Register() relies on us passing it a value of the desired type. In the example above we've passed it a pointer to a struct and a pointer to a custom type representing a map[string]interface. (We could have passed non-pointer values if we wished.) This will then allow us to serialise/deserialise values of those types to and from our sessions. Note that because session values are stored in a map[string]interface{}, there's a need to type-assert data when retrieving it. We'll use the Person struct we registered above: By default, session cookies last for a month. This is probably too long for some cases, but it is easy to change this and other attributes during runtime. Sessions can be configured individually or the store can be configured and then all sessions saved using it will use that configuration. We access session.Options or store.Options to set a new configuration. The fields are basically a subset of http.Cookie fields. Let's change the maximum age of a session to one week: Sometimes we may want to change authentication and/or encryption keys without breaking existing sessions. The CookieStore supports key rotation, and to use it you just need to set multiple authentication and encryption keys, in pairs, to be tested in order: New sessions will be saved using the first pair. Old sessions can still be read because the first pair will fail, and the second will be tested. This makes it easy to "rotate" secret keys and still be able to validate existing sessions. Note: for all pairs the encryption key is optional; set it to nil or omit it and and encryption won't be used. Multiple sessions can be used in the same request, even with different session backends. When this happens, calling Save() on each session individually would be cumbersome, so we have a way to save all sessions at once: it's sessions.Save(). Here's an example: This is possible because when we call Get() from a session store, it adds the session to a common registry. Save() uses it to save all registered sessions.
Package redisc implements a redis cluster client on top of the redigo client package. It supports all commands that can be executed on a redis cluster, including pub-sub, scripts and read-only connections to read data from replicas. See http://redis.io/topics/cluster-spec for details. The package defines two main types: Cluster and Conn. Both are described in more details below, but the Cluster manages the mapping of keys (or more exactly, hash slots computed from keys) to a group of nodes that form a redis cluster, and a Conn manages a connection to this cluster. The package is designed such that for simple uses, or when keys have been carefully named to play well with a redis cluster, a Cluster value can be used as a drop-in replacement for a redis.Pool from the redigo package. Similarly, the Conn type implements redigo's redis.Conn interface (and the augmented redis.ConnWithTimeout one too), so the API to execute commands is the same - in fact the redisc package uses the redigo package as its only third-party dependency. When more control is needed, the package offers some extra behaviour specific to working with a redis cluster: Slot and SplitBySlot functions to compute the slot for a given key and to split a list of keys into groups of keys from the same slot, so that each group can safely be handled using the same connection. *Conn.Bind (or the BindConn package-level helper function) to explicitly specify the keys that will be used with the connection so that the right node is selected, instead of relying on the automatic detection based on the first parameter of the command. *Conn.ReadOnly (or the ReadOnlyConn package-level helper function) to mark a connection as read-only, allowing commands to be served by a replica instead of the master. RetryConn to wrap a connection into one that automatically follows redirections when the cluster moves slots around. Helper functions to deal with cluster-specific errors. The Cluster type manages a redis cluster and offers an interface compatible with redigo's redis.Pool: Along with some additional methods specific to a cluster: If the CreatePool function field is set, then a redis.Pool is created to manage connections to each of the cluster's nodes. A call to Get returns a connection from that pool. The Dial method, on the other hand, guarantees that the returned connection will not be managed by a pool, even if CreatePool is set. It calls redigo's redis.Dial function to create the unpooled connection, passing along any DialOptions set on the cluster. If the cluster's CreatePool field is nil, Get behaves the same as Dial. The Refresh method refreshes the cluster's internal mapping of hash slots to nodes. It should typically be called only once, after the cluster is created and before it is used, so that the first connections already benefit from smart routing. It is automatically kept up-to-date based on the redis MOVED responses afterwards. The EachNode method visits each node in the cluster and calls the provided function with a connection to that node, which may be useful to run diagnostics commands on each node or to collect keys across the whole cluster. The Stats method returns the pool statistics for each node, with the node's address as key of the map. A cluster must be closed once it is no longer used to release its resources. The connection returned from Get or Dial is a redigo redis.Conn interface (that also implements redis.ConnWithTimeout), with a concrete type of *Conn. In addition to the interface's required methods, *Conn adds the following methods: The returned connection is not yet connected to any node; it is "bound" to a specific node only when a call to Do, Send, Receive or Bind is made. For Do, Send and Receive, the node selection is implicit, it uses the first parameter of the command, and computes the hash slot assuming that first parameter is a key. It then binds the connection to the node corresponding to that slot. If there are no parameters for the command, or if there is no command (e.g. in a call to Receive), a random node is selected. Bind is explicit, it gives control to the caller over which node to select by specifying a list of keys that the caller wishes to handle with the connection. All keys must belong to the same slot, and the connection must not already be bound to a node, otherwise an error is returned. On success, the connection is bound to the node holding the slot of the specified key(s). Because the connection is returned as a redis.Conn interface, a type assertion must be used to access the underlying *Conn and to be able to call Bind: The BindConn package-level function is provided as a helper for this common use-case. The ReadOnly method marks the connection as read-only, meaning that it will attempt to connect to a replica instead of the master node for its slot. Once bound to a node, the READONLY redis command is sent automatically, so it doesn't have to be sent explicitly before use. ReadOnly must be called before the connection is bound to a node, otherwise an error is returned. For the same reason as for Bind, a type assertion must be used to call ReadOnly on a *Conn, so a package-level helper function is also provided, ReadOnlyConn. There is no ReadWrite method, because it can be sent as a normal redis command and will essentially end that connection (all commands will now return MOVED errors). If the connection was wrapped in a RetryConn call, then it will automatically follow the redirection to the master node (see the Redirections section). The connection must be closed after use, to release the underlying resources. The redis cluster may return MOVED and ASK errors when the node that received the command doesn't currently hold the slot corresponding to the key. The package cannot reliably handle those redirections automatically because the redirection error may be returned for a pipeline of commands, some of which may have succeeded. However, a connection can be wrapped by a call to RetryConn, which returns a redis.Conn interface where only calls to Do, Close and Err can succeed. That means pipelining is not supported, and only a single command can be executed at a time, but it will automatically handle MOVED and ASK replies, as well as TRYAGAIN errors. Note that even if RetryConn is not used, the cluster always updates its mapping of slots to nodes automatically by keeping track of MOVED replies. The concurrency model is similar to that of the redigo package: Cluster methods are safe to call concurrently (like redis.Pool). Connections do not support concurrent calls to write methods (Send, Flush) or concurrent calls to the read method (Receive). Connections do allow a concurrent reader and writer. Because the Do method combines the functionality of Send, Flush and Receive, it cannot be called concurrently with other methods. The Bind and ReadOnly methods are safe to call concurrently, but there is not much point in doing so for as both will fail if the connection is already bound. Create and use a cluster.
Package postgresql provides a PostgreSQL adapter implementation for toutago-datamapper. This adapter enables mapping domain objects to PostgreSQL database tables with full CRUD support. Package postgresql provides a PostgreSQL database adapter for toutago-datamapper. This adapter implements the datamapper Adapter interface for PostgreSQL databases, with PostgreSQL-specific optimizations including RETURNING clauses for auto-generated IDs. Register the PostgreSQL adapter with your datamapper: Define PostgreSQL connection in YAML: Use through datamapper API: RETURNING clause for auto-generated IDs: Connection pooling with PostgreSQL best practices: The adapter uses database/sql with lib/pq driver which provides connection pooling and is safe for concurrent use. This is version 0.1.0 - requires toutago-datamapper v0.1.0 or higher. Requires Go 1.22 or higher.
Package shards is a client-side database sharding wrapper around database/sql. It works by internally handling the hassle of managing the database/sql.DB connections for each shard (github.com/gustapinto/shards.DB) and by providing some higher level APIs over these (github.com/gustapinto/shards.Querier). Shards also provide some utility functions and data structures, such as a type thread-safe map (see github.com/gustapinto/shards.SafeMap)
Package gocollect brings Laravel's beloved Collections API to Go with full type safety. This package provides a fluent, chainable interface for working with slices and arrays, inspired by Laravel Collections (https://laravel.com/docs/collections). Key features: Basic usage: For Laravel developers: Package gocollect brings Laravel's beloved Collections API to Go with full type safety. This package provides a fluent, chainable interface for working with slices and arrays, inspired by Laravel Collections (https://laravel.com/docs/collections). It leverages Go generics (Go 1.18+) to provide type-safe operations without sacrificing the elegant, expressive syntax that Laravel developers love. Basic transformation example: Working with structs: Collections are immutable by default. All transformation methods return new collections: Methods return collections, enabling fluent chaining: Full generics support for type-safe transformations: Constructors: Collect, New, Range, Times, Wrap, Unwrap Transformations: Map, MapInto, FlatMap, Reverse, Transform, Pluck, Collapse, Flatten Filtering: Filter, Reject, Unique, Where, WhereBetween, WhereIn, WhereNull Aggregations: Sum, Avg, Min, Max, Median, Mode, GroupBy, CountBy, KeyBy, Reduce Search & Retrieval: First, Last, Find, Contains, Every, Some, Search, Get, Has, Random Partitioning: Chunk, Split, Partition, Take, Skip, Slice, ForPage, Nth, Pad, Sliding Sorting: Sort, SortDesc, SortBy, SortByDesc, Shuffle Set Operations: Merge, Concat, Diff, Intersect, Union, Zip, CrossJoin, Combine Conditional: When, Unless, WhenEmpty, WhenNotEmpty, Tap, Pipe, PipeThrough Mutation: Push, Prepend, Pop, Shift Terminal: ToSlice, All, Count, IsEmpty, Join, ToJson, Each, Dump, Dd If you're coming from Laravel, gocollect will feel instantly familiar: Key differences: E-commerce order processing: Data pipeline with multiple transformations: gocollect is designed to be fast with minimal overhead. Benchmarks show ~10-25% overhead compared to raw loops, which is acceptable for the improved readability and maintainability. For complete API documentation, visit: https://pkg.go.dev/github.com/dadansatria/gocollect For Laravel Collections parity tracking, see: LARAVEL_PARITY.md Contributions are welcome! Please see CONTRIBUTING.md for guidelines. MIT License - see LICENSE file for details. Example_aggregations demonstrates various aggregation methods Example_basicChaining demonstrates simple filter and map chaining Example_chaining demonstrates complex method chaining Example_conditionalExecution demonstrates When, Unless, and Tap Example_groupingAndAggregation demonstrates GroupBy and aggregation Example_partitioning demonstrates partitioning methods Example_realWorldEcommerce demonstrates real-world e-commerce usage Example_setOperations demonstrates set operations Example_typeTransformation demonstrates MapInto for type transformation
Package skipper provides an HTTP routing library with flexible configuration as well as a runtime update of the routing rules. Skipper works as an HTTP reverse proxy that is responsible for mapping incoming requests to multiple HTTP backend services, based on routes that are selected by the request attributes. At the same time, both the requests and the responses can be augmented by a filter chain that is specifically defined for each route. Optionally, it can provide circuit breaker mechanism individually for each backend host. Skipper can load and update the route definitions from multiple data sources without being restarted. It provides a default executable command with a few built-in filters, however, its primary use case is to be extended with custom filters, predicates or data sources. For further information read 'Extending Skipper'. Skipper took the core design and inspiration from Vulcand: https://github.com/mailgun/vulcand. Skipper is 'go get' compatible. If needed, create a 'go workspace' first: Get the Skipper packages: Create a file with a route: Optionally, verify the syntax of the file: Start Skipper and make an HTTP request: The core of Skipper's request processing is implemented by a reverse proxy in the 'proxy' package. The proxy receives the incoming request, forwards it to the routing engine in order to receive the most specific matching route. When a route matches, the request is forwarded to all filters defined by it. The filters can modify the request or execute any kind of program logic. Once the request has been processed by all the filters, it is forwarded to the backend endpoint of the route. The response from the backend goes once again through all the filters in reverse order. Finally, it is mapped as the response of the original incoming request. Besides the default proxying mechanism, it is possible to define routes without a real network backend endpoint. One of these cases is called a 'shunt' backend, in which case one of the filters needs to handle the request providing its own response (e.g. the 'static' filter). Actually, filters themselves can instruct the request flow to shunt by calling the Serve(*http.Response) method of the filter context. Another case of a route without a network backend is the 'loopback'. A loopback route can be used to match a request, modified by filters, against the lookup tree with different conditions and then execute a different route. One example scenario can be to use a single route as an entry point to execute some calculation to get an A/B testing decision and then matching the updated request metadata for the actual destination route. This way the calculation can be executed for only those requests that don't contain information about a previously calculated decision. For further details, see the 'proxy' and 'filters' package documentation. Finding a request's route happens by matching the request attributes to the conditions in the route's definitions. Such definitions may have the following conditions: - method - path (optionally with wildcards) - path regular expressions - host regular expressions - headers - header regular expressions It is also possible to create custom predicates with any other matching criteria. The relation between the conditions in a route definition is 'and', meaning, that a request must fulfill each condition to match a route. For further details, see the 'routing' package documentation. Filters are applied in order of definition to the request and in reverse order to the response. They are used to modify request and response attributes, such as headers, or execute background tasks, like logging. Some filters may handle the requests without proxying them to service backends. Filters, depending on their implementation, may accept/require parameters, that are set specifically to the route. For further details, see the 'filters' package documentation. Each route has one of the following backends: HTTP endpoint, shunt or loopback. Backend endpoints can be any HTTP service. They are specified by their network address, including the protocol scheme, the domain name or the IP address, and optionally the port number: e.g. "https://www.example.org:4242". (The path and query are sent from the original request, or set by filters.) A shunt route means that Skipper handles the request alone and doesn't make requests to a backend service. In this case, it is the responsibility of one of the filters to generate the response. A loopback route executes the routing mechanism on current state of the request from the start, including the route lookup. This way it serves as a form of an internal redirect. Route definitions consist of the following: - request matching conditions (predicates) - filter chain (optional) - backend (either an HTTP endpoint or a shunt) The eskip package implements the in-memory and text representations of route definitions, including a parser. (Note to contributors: in order to stay compatible with 'go get', the generated part of the parser is stored in the repository. When changing the grammar, 'go generate' needs to be executed explicitly to update the parser.) For further details, see the 'eskip' package documentation Skipper has filter implementations of basic auth and OAuth2. It can be integrated with tokeninfo based OAuth2 providers. For details, see: https://godoc.org/github.com/zalando/skipper/filters/auth. Skipper's route definitions of Skipper are loaded from one or more data sources. It can receive incremental updates from those data sources at runtime. It provides three different data clients: - Kubernetes: Skipper can be used as part of a Kubernetes Ingress Controller implementation together with https://github.com/zalando-incubator/kube-ingress-aws-controller . In this scenario, Skipper uses the Kubernetes API's Ingress extensions as a source for routing. For a complete deployment example, see more details in: https://github.com/zalando-incubator/kubernetes-on-aws/ . - Innkeeper: the Innkeeper service implements a storage for large sets of Skipper routes, with an HTTP+JSON API, OAuth2 authentication and role management. See the 'innkeeper' package and https://github.com/zalando/innkeeper. - etcd: Skipper can load routes and receive updates from etcd clusters (https://github.com/coreos/etcd). See the 'etcd' package. - static file: package eskipfile implements a simple data client, which can load route definitions from a static file in eskip format. Currently, it loads the routes on startup. It doesn't support runtime updates. Skipper can use additional data sources, provided by extensions. Sources must implement the DataClient interface in the routing package. Skipper provides circuit breakers, configured either globally, based on backend hosts or based on individual routes. It supports two types of circuit breaker behavior: open on N consecutive failures, or open on N failures out of M requests. For details, see: https://godoc.org/github.com/zalando/skipper/circuit. Skipper can be started with the default executable command 'skipper', or as a library built into an application. The easiest way to start Skipper as a library is to execute the 'Run' function of the current, root package. Each option accepted by the 'Run' function is wired in the default executable as well, as a command line flag. E.g. EtcdUrls becomes -etcd-urls as a comma separated list. For command line help, enter: An additional utility, eskip, can be used to verify, print, update and delete routes from/to files or etcd (Innkeeper on the roadmap). See the cmd/eskip command package, and/or enter in the command line: Skipper doesn't use dynamically loaded plugins, however, it can be used as a library, and it can be extended with custom predicates, filters and/or custom data sources. To create a custom predicate, one needs to implement the PredicateSpec interface in the routing package. Instances of the PredicateSpec are used internally by the routing package to create the actual Predicate objects as referenced in eskip routes, with concrete arguments. Example, randompredicate.go: In the above example, a custom predicate is created, that can be referenced in eskip definitions with the name 'Random': To create a custom filter we need to implement the Spec interface of the filters package. 'Spec' is the specification of a filter, and it is used to create concrete filter instances, while the raw route definitions are processed. Example, hellofilter.go: The above example creates a filter specification, and in the routes where they are included, the filter instances will set the 'X-Hello' header for each and every response. The name of the filter is 'hello', and in a route definition it is referenced as: The easiest way to create a custom Skipper variant is to implement the required filters (as in the example above) by importing the Skipper package, and starting it with the 'Run' command. Example, hello.go: A file containing the routes, routes.eskip: Start the custom router: The 'Run' function in the root Skipper package starts its own listener but it doesn't provide the best composability. The proxy package, however, provides a standard http.Handler, so it is possible to use it in a more complex solution as a building block for routing. Skipper provides detailed logging of failures, and access logs in Apache log format. Skipper also collects detailed performance metrics, and exposes them on a separate listener endpoint for pulling snapshots. For details, see the 'logging' and 'metrics' packages documentation. The router's performance depends on the environment and on the used filters. Under ideal circumstances, and without filters, the biggest time factor is the route lookup. Skipper is able to scale to thousands of routes with logarithmic performance degradation. However, this comes at the cost of increased memory consumption, due to storing the whole lookup tree in a single structure. Benchmarks for the tree lookup can be run by: In case more aggressive scale is needed, it is possible to setup Skipper in a cascade model, with multiple Skipper instances for specific route segments.
Package spanner provides a client for reading and writing to Cloud Spanner databases. See the packages under admin for clients that operate on databases and instances. Note: This package is in beta. Some backwards-incompatible changes may occur. See https://cloud.google.com/spanner/docs/getting-started/go/ for an introduction to Cloud Spanner and additional help on using this API. See https://godoc.org/cloud.google.com/go for authentication, timeouts, connection pooling and similar aspects of this package. To start working with this package, create a client that refers to the database of interest: Remember to close the client after use to free up the sessions in the session pool. Two Client methods, Apply and Single, work well for simple reads and writes. As a quick introduction, here we write a new row to the database and read it back: All the methods used above are discussed in more detail below. Every Cloud Spanner row has a unique key, composed of one or more columns. Construct keys with a literal of type Key: The keys of a Cloud Spanner table are ordered. You can specify ranges of keys using the KeyRange type: By default, a KeyRange includes its start key but not its end key. Use the Kind field to specify other boundary conditions: A KeySet represents a set of keys. A single Key or KeyRange can act as a KeySet. Use the KeySets function to build the union of several KeySets: AllKeys returns a KeySet that refers to all the keys in a table: All Cloud Spanner reads and writes occur inside transactions. There are two types of transactions, read-only and read-write. Read-only transactions cannot change the database, do not acquire locks, and may access either the current database state or states in the past. Read-write transactions can read the database before writing to it, and always apply to the most recent database state. The simplest and fastest transaction is a ReadOnlyTransaction that supports a single read operation. Use Client.Single to create such a transaction. You can chain the call to Single with a call to a Read method. When you only want one row whose key you know, use ReadRow. Provide the table name, key, and the columns you want to read: Read multiple rows with the Read method. It takes a table name, KeySet, and list of columns: Read returns a RowIterator. You can call the Do method on the iterator and pass a callback: RowIterator also follows the standard pattern for the Google Cloud Client Libraries: Always call Stop when you finish using an iterator this way, whether or not you iterate to the end. (Failing to call Stop could lead you to exhaust the database's session quota.) To read rows with an index, use ReadUsingIndex. The most general form of reading uses SQL statements. Construct a Statement with NewStatement, setting any parameters using the Statement's Params map: You can also construct a Statement directly with a struct literal, providing your own map of parameters. Use the Query method to run the statement and obtain an iterator: Once you have a Row, via an iterator or a call to ReadRow, you can extract column values in several ways. Pass in a pointer to a Go variable of the appropriate type when you extract a value. You can extract by column position or name: You can extract all the columns at once: Or you can define a Go struct that corresponds to your columns, and extract into that: For Cloud Spanner columns that may contain NULL, use one of the NullXXX types, like NullString: To perform more than one read in a transaction, use ReadOnlyTransaction: You must call Close when you are done with the transaction. Cloud Spanner read-only transactions conceptually perform all their reads at a single moment in time, called the transaction's read timestamp. Once a read has started, you can call ReadOnlyTransaction's Timestamp method to obtain the read timestamp. By default, a transaction will pick the most recent time (a time where all previously committed transactions are visible) for its reads. This provides the freshest data, but may involve some delay. You can often get a quicker response if you are willing to tolerate "stale" data. You can control the read timestamp selected by a transaction by calling the WithTimestampBound method on the transaction before using it. For example, to perform a query on data that is at most one minute stale, use See the documentation of TimestampBound for more details. To write values to a Cloud Spanner database, construct a Mutation. The spanner package has functions for inserting, updating and deleting rows. Except for the Delete methods, which take a Key or KeyRange, each mutation-building function comes in three varieties. One takes lists of columns and values along with the table name: One takes a map from column names to values: And the third accepts a struct value, and determines the columns from the struct field names: To apply a list of mutations to the database, use Apply: If you need to read before writing in a single transaction, use a ReadWriteTransaction. ReadWriteTransactions may abort and need to be retried. You pass in a function to ReadWriteTransaction, and the client will handle the retries automatically. Use the transaction's BufferWrite method to buffer mutations, which will all be executed at the end of the transaction: Spanner supports DML statements like INSERT, UPDATE and DELETE. Use ReadWriteTransaction.Update to run DML statements. It returns the number of rows affected. (You can call use ReadWriteTransaction.Query with a DML statement. The first call to Next on the resulting RowIterator will return iterator.Done, and the RowCount field of the iterator will hold the number of affected rows.) For large databases, it may be more efficient to partition the DML statement. Use client.PartitionedUpdate to run a DML statement in this way. Not all DML statements can be partitioned. This client has been instrumented to use OpenCensus tracing (http://opencensus.io). To enable tracing, see "Enabling Tracing for a Program" at https://godoc.org/go.opencensus.io/trace. OpenCensus tracing requires Go 1.8 or higher.
Package tiledb is a idomatic go binding to tiledb's c_api. Go structs are used for object style access to tiledb types, such as Config and ArraySchema. Tiledb c objects that are alloc'ed are set to be freeded on garbage collection using `runtime.SetFinalizer`. For more information on TileDB see official docs, https://docs.tiledb.io/en/stable . Semantic Versioning is followed for this package and for compatibility with upcoming vgo. See compatibility section of Readme for a mapping of TileDB-Go package to tiledb core library versions, https://github.com/TileDB-Inc/TileDB-Go/blob/master/README.md#compatibility . See readme for installation requirements and instructions: https://github.com/TileDB-Inc/TileDB-Go/blob/master/README.md#installation . See quickstart_dense_test.go and quickstart_sparse_test.go for examples. Also checkout the official tiledb quickstart docs https://docs.tiledb.io/en/latest/quickstart.html ExampleDenseArray shows and example creation, writing and reading of a dense array ExampleSparseArray shows and example creation, writing and reading of a sparse array
Package log is a high-performance and extensible logging library designed specifically for the Go programming language. It provides flexible and structured logging capabilities, including context field extraction, multi-level logging configuration, and multiple output options, making it ideal for server-side applications. ## Core Concepts: Tags: Tags are a core concept in the log package used to categorize logs. By registering a tag via the `RegisterTag` function, you can use regular expressions to match the user-defined tags. This approach allows for a unified API for logging without explicitly creating logger instances. Even third-party libraries can write logs without setting up a logger object. Loggers: A Logger is the object that actually handles the logging process. You can obtain a logger instance using the `GetLogger` function, which is mainly provided for compatibility with legacy projects. This allows you to directly retrieve a logger by its name and log pre-formatted messages using the `Write` function. Context Field Extraction: Contextual data can be extracted and included in log entries via configurable functions: - `log.StringFromContext`: Extracts a string value (e.g., a request ID) from the context. - `log.FieldsFromContext`: Returns a list of structured fields from the context, such as trace IDs or user IDs. Configuration from File: The `log.RefreshFile` function allows loading the logger's configuration from an external file (e.g., XML or JSON). Logger Initialization and Logging: - Using `GetLogger`, you can fetch a logger instance (often for compatibility with older systems). - You can also register custom tags using `RegisterTag` to classify logs according to your needs. Logging Messages: The package provides various logging functions, such as `Tracef`, `Debugf`, `Infof`, `Warnf`, etc., which log messages at different levels (e.g., Trace, Debug, Info, Warn). These functions can either accept structured fields or formatted messages. Structured Logging: The logger also supports structured logging, where fields are captured as key-value pairs and logged with the message. The fields can be provided directly in the log functions or through a map. ## Examples: Using a pre-registered tag: Using structured fields:
Package egoscale is a mapping for with the CloudStack API (http://cloudstack.apache.org/api.html) from Go.
Package egoscale is a mapping for with the CloudStack API (http://cloudstack.apache.org/api.html) from Go.
bindata converts any file into managable Go source code. Useful for embedding binary data into a go program. The file data is optionally gzip compressed before being converted to a raw byte slice. The following paragraphs cover some of the customization options which can be specified in the Config struct, which must be passed into the Translate() call. When used with the `Debug` option, the generated code does not actually include the asset data. Instead, it generates function stubs which load the data from the original file on disk. The asset API remains identical between debug and release builds, so your code will not have to change. This is useful during development when you expect the assets to change often. The host application using these assets uses the same API in both cases and will not have to care where the actual data comes from. An example is a Go webserver with some embedded, static web content like HTML, JS and CSS files. While developing it, you do not want to rebuild the whole server and restart it every time you make a change to a bit of javascript. You just want to build and launch the server once. Then just press refresh in the browser to see those changes. Embedding the assets with the `debug` flag allows you to do just that. When you are finished developing and ready for deployment, just re-invoke `go-bindata` without the `-debug` flag. It will now embed the latest version of the assets. The `NoMemCopy` option will alter the way the output file is generated. It will employ a hack that allows us to read the file data directly from the compiled program's `.rodata` section. This ensures that when we call call our generated function, we omit unnecessary memcopies. The downside of this, is that it requires dependencies on the `reflect` and `unsafe` packages. These may be restricted on platforms like AppEngine and thus prevent you from using this mode. Another disadvantage is that the byte slice we create, is strictly read-only. For most use-cases this is not a problem, but if you ever try to alter the returned byte slice, a runtime panic is thrown. Use this mode only on target platforms where memory constraints are an issue. The default behavior is to use the old code generation method. This prevents the two previously mentioned issues, but will employ at least one extra memcopy and thus increase memory requirements. For instance, consider the following two examples: This would be the default mode, using an extra memcopy but gives a safe implementation without dependencies on `reflect` and `unsafe`: Here is the same functionality, but uses the `.rodata` hack. The byte slice returned from this example can not be written to without generating a runtime error. The NoCompress option indicates that the supplied assets are *not* GZIP compressed before being turned into Go code. The data should still be accessed through a function call, so nothing changes in the API. This feature is useful if you do not care for compression, or the supplied resource is already compressed. Doing it again would not add any value and may even increase the size of the data. The default behavior of the program is to use compression. The keys used in the `_bindata` map are the same as the input file name passed to `go-bindata`. This includes the path. In most cases, this is not desireable, as it puts potentially sensitive information in your code base. For this purpose, the tool supplies another command line flag `-prefix`. This accepts a portion of a path name, which should be stripped off from the map keys and function names. For example, running without the `-prefix` flag, we get: Running with the `-prefix` flag, we get: With the optional Tags field, you can specify any go build tags that must be fulfilled for the output file to be included in a build. This is useful when including binary data in multiple formats, where the desired format is specified at build time with the appropriate tags. The tags are appended to a `// +build` line in the beginning of the output file and must follow the build tags syntax specified by the go tool.
Package spanner provides a client for reading and writing to Cloud Spanner databases. See the packages under admin for clients that operate on databases and instances. Note: This package is in beta. Some backwards-incompatible changes may occur. See https://cloud.google.com/spanner/docs/getting-started/go/ for an introduction to Cloud Spanner and additional help on using this API. See https://godoc.org/cloud.google.com/go for authentication, timeouts, connection pooling and similar aspects of this package. To start working with this package, create a client that refers to the database of interest: Remember to close the client after use to free up the sessions in the session pool. Two Client methods, Apply and Single, work well for simple reads and writes. As a quick introduction, here we write a new row to the database and read it back: All the methods used above are discussed in more detail below. Every Cloud Spanner row has a unique key, composed of one or more columns. Construct keys with a literal of type Key: The keys of a Cloud Spanner table are ordered. You can specify ranges of keys using the KeyRange type: By default, a KeyRange includes its start key but not its end key. Use the Kind field to specify other boundary conditions: A KeySet represents a set of keys. A single Key or KeyRange can act as a KeySet. Use the KeySets function to build the union of several KeySets: AllKeys returns a KeySet that refers to all the keys in a table: All Cloud Spanner reads and writes occur inside transactions. There are two types of transactions, read-only and read-write. Read-only transactions cannot change the database, do not acquire locks, and may access either the current database state or states in the past. Read-write transactions can read the database before writing to it, and always apply to the most recent database state. The simplest and fastest transaction is a ReadOnlyTransaction that supports a single read operation. Use Client.Single to create such a transaction. You can chain the call to Single with a call to a Read method. When you only want one row whose key you know, use ReadRow. Provide the table name, key, and the columns you want to read: Read multiple rows with the Read method. It takes a table name, KeySet, and list of columns: Read returns a RowIterator. You can call the Do method on the iterator and pass a callback: RowIterator also follows the standard pattern for the Google Cloud Client Libraries: Always call Stop when you finish using an iterator this way, whether or not you iterate to the end. (Failing to call Stop could lead you to exhaust the database's session quota.) To read rows with an index, use ReadUsingIndex. The most general form of reading uses SQL statements. Construct a Statement with NewStatement, setting any parameters using the Statement's Params map: You can also construct a Statement directly with a struct literal, providing your own map of parameters. Use the Query method to run the statement and obtain an iterator: Once you have a Row, via an iterator or a call to ReadRow, you can extract column values in several ways. Pass in a pointer to a Go variable of the appropriate type when you extract a value. You can extract by column position or name: You can extract all the columns at once: Or you can define a Go struct that corresponds to your columns, and extract into that: For Cloud Spanner columns that may contain NULL, use one of the NullXXX types, like NullString: To perform more than one read in a transaction, use ReadOnlyTransaction: You must call Close when you are done with the transaction. Cloud Spanner read-only transactions conceptually perform all their reads at a single moment in time, called the transaction's read timestamp. Once a read has started, you can call ReadOnlyTransaction's Timestamp method to obtain the read timestamp. By default, a transaction will pick the most recent time (a time where all previously committed transactions are visible) for its reads. This provides the freshest data, but may involve some delay. You can often get a quicker response if you are willing to tolerate "stale" data. You can control the read timestamp selected by a transaction by calling the WithTimestampBound method on the transaction before using it. For example, to perform a query on data that is at most one minute stale, use See the documentation of TimestampBound for more details. To write values to a Cloud Spanner database, construct a Mutation. The spanner package has functions for inserting, updating and deleting rows. Except for the Delete methods, which take a Key or KeyRange, each mutation-building function comes in three varieties. One takes lists of columns and values along with the table name: One takes a map from column names to values: And the third accepts a struct value, and determines the columns from the struct field names: To apply a list of mutations to the database, use Apply: If you need to read before writing in a single transaction, use a ReadWriteTransaction. ReadWriteTransactions may abort and need to be retried. You pass in a function to ReadWriteTransaction, and the client will handle the retries automatically. Use the transaction's BufferWrite method to buffer mutations, which will all be executed at the end of the transaction: Spanner supports DML statements like INSERT, UPDATE and DELETE. Use ReadWriteTransaction.Update to run DML statements. It returns the number of rows affected. (You can call use ReadWriteTransaction.Query with a DML statement. The first call to Next on the resulting RowIterator will return iterator.Done, and the RowCount field of the iterator will hold the number of affected rows.) For large databases, it may be more efficient to partition the DML statement. Use client.PartitionedUpdate to run a DML statement in this way. Not all DML statements can be partitioned. This client has been instrumented to use OpenCensus tracing (http://opencensus.io). To enable tracing, see "Enabling Tracing for a Program" at https://godoc.org/go.opencensus.io/trace. OpenCensus tracing requires Go 1.8 or higher.
Package delve provides a flexible navigation and manipulation API for structured data (maps, slices). It enables type-safe traversal and modification of nested data structures using qualified path references. Key features: - Fluent interface for chaining operations - Support for both maps and slices through generic interfaces - Type-safe value retrieval with automatic wrapping - Nested structure navigation through sub-navigators - Optional panic-style error handling for mandatory operations The package operates through Navigator instances that wrap underlying data sources, providing consistent access patterns regardless of the source data format.
bindata converts any file into manageable Go source code. Useful for embedding binary data into a go program. The file data is optionally gzip compressed before being converted to a raw byte slice. The following paragraphs cover some of the customization options which can be specified in the Config struct, which must be passed into the Translate() call. When used with the `Debug` option, the generated code does not actually include the asset data. Instead, it generates function stubs which load the data from the original file on disk. The asset API remains identical between debug and release builds, so your code will not have to change. This is useful during development when you expect the assets to change often. The host application using these assets uses the same API in both cases and will not have to care where the actual data comes from. An example is a Go webserver with some embedded, static web content like HTML, JS and CSS files. While developing it, you do not want to rebuild the whole server and restart it every time you make a change to a bit of javascript. You just want to build and launch the server once. Then just press refresh in the browser to see those changes. Embedding the assets with the `debug` flag allows you to do just that. When you are finished developing and ready for deployment, just re-invoke `go-bindata` without the `-debug` flag. It will now embed the latest version of the assets. The `NoMemCopy` option will alter the way the output file is generated. It will employ a hack that allows us to read the file data directly from the compiled program's `.rodata` section. This ensures that when we call call our generated function, we omit unnecessary memcopies. The downside of this, is that it requires dependencies on the `reflect` and `unsafe` packages. These may be restricted on platforms like AppEngine and thus prevent you from using this mode. Another disadvantage is that the byte slice we create, is strictly read-only. For most use-cases this is not a problem, but if you ever try to alter the returned byte slice, a runtime panic is thrown. Use this mode only on target platforms where memory constraints are an issue. The default behaviour is to use the old code generation method. This prevents the two previously mentioned issues, but will employ at least one extra memcopy and thus increase memory requirements. For instance, consider the following two examples: This would be the default mode, using an extra memcopy but gives a safe implementation without dependencies on `reflect` and `unsafe`: Here is the same functionality, but uses the `.rodata` hack. The byte slice returned from this example can not be written to without generating a runtime error. The NoCompress option indicates that the supplied assets are *not* GZIP compressed before being turned into Go code. The data should still be accessed through a function call, so nothing changes in the API. This feature is useful if you do not care for compression, or the supplied resource is already compressed. Doing it again would not add any value and may even increase the size of the data. The default behaviour of the program is to use compression. The keys used in the `_bindata` map are the same as the input file name passed to `go-bindata`. This includes the path. In most cases, this is not desirable, as it puts potentially sensitive information in your code base. For this purpose, the tool supplies another command line flag `-prefix`. This accepts a portion of a path name, which should be stripped off from the map keys and function names. For example, running without the `-prefix` flag, we get: Running with the `-prefix` flag, we get: With the optional Tags field, you can specify any go build tags that must be fulfilled for the output file to be included in a build. This is useful when including binary data in multiple formats, where the desired format is specified at build time with the appropriate tags. The tags are appended to a `// +build` line in the beginning of the output file and must follow the build tags syntax specified by the go tool.
Package z3 provides Go bindings to the Z3 SMT Solver. The bindings are a balance between idiomatic Go and being an obvious translation from the Z3 API so you can look up Z3 APIs and find the intuitive mapping in Go. The most foreign thing to Go programmers will be error handling. Rather than return the `error` type from almost every function, the z3 package mimics Z3's API by requiring you to set an error handler callback. This error handler will be invoked whenenver an error occurs. See ErrorHandler and Context.SetErrorHandler for more information.
Package hotkey provides the basic facility to register a system-level global hotkey shortcut so that an application can be notified if a user triggers the desired hotkey. A hotkey must be a combination of modifiers and a single key. Note platform specific details: On macOS, due to the OS restriction (other platforms does not have this restriction), hotkey events must be handled on the "main thread". Therefore, in order to use this package properly, one must start an OS main event loop on the main thread, For self-contained applications, using mainthread package. is possible. It is uncessary or applications based on other GUI frameworks, such as fyne, ebiten, or Gio. See the "examples" for more examples. On Linux (X11), when AutoRepeat is enabled in the X server, the Keyup is triggered automatically and continuously as Keydown continues. On Linux (X11), some keys may be mapped to multiple Mod keys. To correctly register the key combination, one must use the correct underlying keycode combination. For example, a regular Ctrl+Alt+S might be registered as: Ctrl+Mod2+Mod4+S. If this package did not include a desired key, one can always provide the keycode to the API. For example, if a key code is 0x15, then the corresponding key is `hotkey.Key(0x15)`. THe following is a minimum example:
Package egoscale is a mapping for with the CloudStack API (http://cloudstack.apache.org/api.html) from Go.
sunspec is an API that allows navigation around SunSpec device maps. The key abstractions are: Array, Device, Model, Block and Point with Arrays being collection of Devices, Devices collections of Models and so on. At the lowest level are Points which provide for strongly typed access to blocks of 16 bit registers. The API is intended to be backed by different physical implementations, including:
Package geomaps provides the API client, operations, and parameter types for Amazon Location Service Maps V2.
Package tk9.0 is a CGo-free, cross platform GUI toolkit for Go. It is similar to Tkinter for Python. Also available in _examples/hello.go To execute the above program on any supported target issue something like The CGO_ENABLED=0 is optional and here it only demonstrates the program can be built without CGo. Do I need to install the Tcl/Tk libraries on my system to use this package or programs that import it? No. You still have to have a desktop environment installed on systems where that is not necessarily the case by default. That means some of the unix-like systems. Usually installing any desktop environment, like Gnome, Xfce etc. provides all the required library (.so) files. The minimum is the X Window System and this package was tested to work there, although with all the limitations one can expect in this case. Windows: How to build an executable that doesn't open a console window when run? From the documentation for cmd/link: On Windows, -H windowsgui writes a "GUI binary" instead of a "console binary.". To pass the flag to the Go build system use 'go build -ldflags -H=windowsgui somefile.go', for example. What does CGo-free really mean? cgo is a tool used by the Go build system when Go code uses the pseudo-import "C". For technical details please see the link. For us it is important that using CGo ends up invoking a C compiler during building of a Go program/package. The C compiler is used to determine exact, possibly locally dependent, values of C preprocessor constants and other defines, as well as the exact layout of C structs. This enables the Go compiler to correctly handle things like, schematically `C.someStruct.someField` appearing in Go code. At runtime a Go program using CGo must switch stacks when calling into C. Additionally the runtime scheduler is made aware of such calls into C. The former is necessary, the later is not, but it is good to have as it improves performance and provides better resource management. There is an evironment variable defined, `CGO_ENABLED`. When the Go build system compiles Go code, it checks for the value of this env var. If it is not set or its value is "1", then CGo is enabled and used when 'import "C"' is encountered. If the env var contains "0", CGo is disabled and programs using 'import "C"' will not compile. After this longish intro we can finally get to the short answer: CGo-free means this package can be compiled with CGO_ENABLED=0. In other words, there's no 'import "C"' clause anywhere. The consequences of being CGo-free follows from the above. The Go build system does not need to invoke a C compiler when compiling this package. Hence users don't have to have a C compiler installed in their machines. There are advantages when a C compiler is not invoked during compilation/build of Go code. Programs can be installed on all targets supported by this package the easy way: '$ go install example.com/foo@latest' and programs for all supported targets can be cross-compiled on all Go-supported targets just by setting the respective env vars, like performing '$ GOOS=darwin GOARCH=arm64 go build' on a Windows/AMD64 machine, for example. How does this package achieve being CGo-free? The answer depends on the particular target in question. Targets supported by purego call into the Tcl/Tk C libraries without using CGo. See the source code at the link for how it is done. On other targets CGo is avoided by transpiling all the C libraries and their transitive dependencies to Go. In both cases the advantages are the same: CGo-free programs are go-installable and CGo-free programs can be cross-compiled without having a C compiler or a cross-C compiler tool chain installed. Does being CGo-free remove the overhead of crossing the Go-C boundary? For the purego targets, no. Only the C compiler is not involved anymore. For other supported targets the boundary for calling Tcl/Tk C API from Go is gone. No free lunches though, the transpilled code has to care about additional things the C code does not need to - with the respective performance penalties, now just in different places. Consider this program in _examples/debugging.go: Execute the program using the tags as indicated, then close the window or click the Hello button. With the tk.dmesg tag the package initialization prints the debug messages path. So we can view it, for example, like this: 18876 was the process PID in this particular run. Using the tags allows to inspect the Tcl/Tk code executed during the lifetime of the process. These combinations of GOOS and GOARCH are currently supported Specific to FreeBSD: When building with cross-compiling or CGO_ENABLED=0, add the following argument to `go` so that these symbols are defined by making fakecgo the Cgo. Builder results available at modern-c.appspot.com. At the moment the package is a MVP allowing to build at least some simple, yet useful programs. The full Tk API is not yet usable. Please report needed, but non-exposed Tk features at the issue tracker, thanks. Providing feedback about the missing building blocks, bugs and your user experience is invaluable in helping this package to eventually reach version 1. See also RERO. The ErrorMode variable selects the behaviour on errors for certain functions that do not return error. When ErrorMode is PanicOnError, the default, errors will panic, providing a stack trace. When ErrorMode is CollectErrors, errors will be recorded using errors.Join in the Error variable. Even if a function does not return error, it is still possible to handle errors in the usual way when needed, except that Error is now a static variable. That's a problem in the general case, but less so in this package that must be used from a single goroutine only, as documented elsewhere. This is obviously a compromise enabling to have a way to check for errors and, at the same time, the ability to write concise code like: There are altogether four different places where the call to the Button function can produce errors as additionally to the call itself, every of its three arguments can independently fail as well. Checking each and one of them separately is not always necessary in GUI code. But the explicit option in the first example is still available when needed. There is a centralized theme register in Themes. Theme providers can opt in to call RegisterTheme at package initialization to make themes discoverable at run-time. Clients can use ActivateTheme to apply a theme by name. Example in _examples/azure.go. There is a VNC over wbesockets functionality available for X11 backed hosts. See the tk9.0/vnc package for details. Package initialization is done lazily. This saves noticeable additional startup time and avoids screen flicker in hybrid programs that use the GUI only on demand. (For a hybrid example see _examples/ring.go.) Early package initialization can be enforced by Initialize. Initialization will fail if a Unix process starts on a machine with no X server or the process is started in a way that it has no access to the X server. On the other hand, this package may work on Unix machines with no X server if the process is started remotely using '$ ssh -X foo@bar' and the X forwarding is enabled/supported. Darwin port uses the macOS GUI API and does not use X11. Zero or more options can be specified when creating a widget. For example or Tcl/Tk uses widget pathnames, image and font names explicitly set by user code. This package generates those names automatically and they are not directly needed in code that uses this package. There is, for a example, a Tcl/tk 'text' widget and a '-text' option. This package exports the widget as type 'TextWidget', its constructor as function 'Text' and the option as function 'Txt'. The complete list is: This package should be used from the same goroutine that initialized the package. Package initialization performs a runtime.LockOSThread, meaning func main() will start execuing locked on the same OS thread. The Command() and similar options expect an argument that must be one of: - An EventHandler or a function literal of the same signature. - A func(). This can be used when the handler does not need the associated Event instance. When passing an argument of type time.Durarion to a function accepting 'any', the duration is converted to an integer number of milliseconds. When passing an argument of type image.Image to a function accepting 'any', the image is converted to a encoding/base64 encoded string of the PNG representation of the image. When passing an argument of type []byte to a function accepting 'any', the byte slice is converted to a encoding/base64 encoded string. When passing an argument of type []FileType to a function accepting 'any', the slice is converted to the representation the Tcl/Tk -filetypes option expects. At least some minimal knowledge of reading Tcl/Tk code is probably required for using this package and/or using the related documentation. However you will not need to write any Tcl code and you do not need to care about the grammar of Tcl words/string literals and how it differs from Go. There are several Tcl/Tk tutorials available, for example at tutorialspoint. Merge requests for known issues are always welcome. Please send merge requests for new features/APIs after filling and discussing the additions/changes at the issue tracker first. Most of the documentation is generated directly from the Tcl/Tk documentation and may not be entirely correct for the Go package. Those parts hopefully still serve as a quick/offline Tcl/Tk reference. Parts of the documentation are copied and/or modified from the tcl.tk site, see the LICENSE-TCLTK file for details. Parts of the documentation are copied and/or modified from the tkinter.ttk site which is You can support the maintenance and further development of this package at jnml's LiberaPay (using PayPal). "Checkbutton.indicator" style element options: "Combobox.downarrow" style element options: "Menubutton.indicator" style element options: "Radiobutton.indicator" style element options: "Spinbox.downarrow" style element options: "Spinbox.uparrow" style element options: "Treeitem.indicator" style element options: "arrow" style element options: "border" style element options: "downarrow" style element options: "field" style element options: "leftarrow" style element options: "rightarrow" style element options: "slider" style element options: "thumb" style element options: "uparrow" style element options: "alt" theme style list Style map: -foreground {disabled #a3a3a3} -background {disabled #d9d9d9 active #ececec} -embossed {disabled 1} Layout: ComboboxPopdownFrame.border -sticky nswe Layout: Treeheading.cell -sticky nswe Treeheading.border -sticky nswe -children {Treeheading.padding -sticky nswe -children {Treeheading.image -side right -sticky {} Treeheading.text -sticky we}} Layout: Treeitem.padding -sticky nswe -children {Treeitem.indicator -side left -sticky {} Treeitem.image -side left -sticky {} Treeitem.text -sticky nswe} Layout: Treeitem.separator -sticky nswe Layout: Button.border -sticky nswe -border 1 -children {Button.focus -sticky nswe -children {Button.padding -sticky nswe -children {Button.label -sticky nswe}}} Style map: -highlightcolor {alternate black} -relief { {pressed !disabled} sunken {active !disabled} raised } Layout: Checkbutton.padding -sticky nswe -children {Checkbutton.indicator -side left -sticky {} Checkbutton.focus -side left -sticky w -children {Checkbutton.label -sticky nswe}} Style map: -indicatorcolor {pressed #d9d9d9 alternate #aaaaaa disabled #d9d9d9} Layout: Combobox.field -sticky nswe -children {Combobox.downarrow -side right -sticky ns Combobox.padding -sticky nswe -children {Combobox.textarea -sticky nswe}} Style map: -fieldbackground {readonly #d9d9d9 disabled #d9d9d9} -arrowcolor {disabled #a3a3a3} Layout: Entry.field -sticky nswe -border 1 -children {Entry.padding -sticky nswe -children {Entry.textarea -sticky nswe}} Style map: -fieldbackground {readonly #d9d9d9 disabled #d9d9d9} Layout: Labelframe.border -sticky nswe Layout: Menubutton.border -sticky nswe -children {Menubutton.focus -sticky nswe -children {Menubutton.indicator -side right -sticky {} Menubutton.padding -sticky we -children {Menubutton.label -side left -sticky {}}}} Layout: Notebook.client -sticky nswe Layout: Notebook.tab -sticky nswe -children {Notebook.padding -side top -sticky nswe -children {Notebook.focus -side top -sticky nswe -children {Notebook.label -side top -sticky {}}}} Style map: -expand {selected {1.5p 1.5p 0.75p 0}} -background {selected #d9d9d9} - Layout: Radiobutton.padding -sticky nswe -children {Radiobutton.indicator -side left -sticky {} Radiobutton.focus -side left -sticky {} -children {Radiobutton.label -sticky nswe}} Style map: -indicatorcolor {pressed #d9d9d9 alternate #aaaaaa disabled #d9d9d9} - - Layout: Spinbox.field -side top -sticky we -children {null -side right -sticky {} -children {Spinbox.uparrow -side top -sticky e Spinbox.downarrow -side bottom -sticky e} Spinbox.padding -sticky nswe -children {Spinbox.textarea -sticky nswe}} Style map: -fieldbackground {readonly #d9d9d9 disabled #d9d9d9} -arrowcolor {disabled #a3a3a3} Layout: Notebook.tab -sticky nswe -children {Notebook.padding -side top -sticky nswe -children {Notebook.focus -side top -sticky nswe -children {Notebook.label -side top -sticky {}}}} Layout: Toolbutton.border -sticky nswe -children {Toolbutton.focus -sticky nswe -children {Toolbutton.padding -sticky nswe -children {Toolbutton.label -sticky nswe}}} Style map: -relief {disabled flat selected sunken pressed sunken active raised} -background {pressed #c3c3c3 active #ececec} Layout: Treeview.field -sticky nswe -border 1 -children {Treeview.padding -sticky nswe -children {Treeview.treearea -sticky nswe}} Style map: -foreground {disabled #a3a3a3 selected #ffffff} -background {disabled #d9d9d9 selected #4a6984} Layout: Treeitem.separator -sticky nswe "Button.button" style element options: "Checkbutton.button" style element options: "Combobox.button" style element options: "DisclosureButton.button" style element options: "Entry.field" style element options: "GradientButton.button" style element options: "HelpButton.button" style element options: "Horizontal.Scrollbar.leftarrow" style element options: "Horizontal.Scrollbar.rightarrow" style element options: "Horizontal.Scrollbar.thumb" style element options: "Horizontal.Scrollbar.trough" style element options: "InlineButton.button" style element options: "Labelframe.border" style element options: "Menubutton.button" style element options: "Notebook.client" style element options: "Notebook.tab" style element options: "Progressbar.track" style element options: "Radiobutton.button" style element options: "RecessedButton.button" style element options: "RoundedRectButton.button" style element options: "Scale.slider" style element options: "Scale.trough" style element options: "Searchbox.field" style element options: "SidebarButton.button" style element options: "Spinbox.downarrow" style element options: "Spinbox.field" style element options: "Spinbox.uparrow" style element options: "Toolbar.background" style element options: "Toolbutton.border" style element options: "Treeheading.cell" style element options: "Treeitem.indicator" style element options: "Treeview.treearea" style element options: "Vertical.Scrollbar.downarrow" style element options: "Vertical.Scrollbar.thumb" style element options: "Vertical.Scrollbar.trough" style element options: "Vertical.Scrollbar.uparrow" style element options: "background" style element options: "field" style element options: "fill" style element options: "hseparator" style element options: "separator" style element options: "sizegrip" style element options: "vseparator" style element options: "aqua" theme style list Style map: -selectforeground { background systemSelectedTextColor !focus systemSelectedTextColor} -foreground { disabled systemDisabledControlTextColor background systemLabelColor} -selectbackground { background systemSelectedTextBackgroundColor !focus systemSelectedTextBackgroundColor} Layout: DisclosureButton.button -sticky nswe Layout: GradientButton.button -sticky nswe -children {Button.padding -sticky nswe -children {Button.label -sticky nswe}} Layout: Treeheading.cell -sticky nswe Treeheading.image -side right -sticky {} Treeheading.text -side top -sticky {} Layout: HelpButton.button -sticky nswe Layout: Horizontal.Scrollbar.trough -sticky we -children {Horizontal.Scrollbar.thumb -sticky nswe Horizontal.Scrollbar.rightarrow -side right -sticky {} Horizontal.Scrollbar.leftarrow -side right -sticky {}} Layout: Button.padding -sticky nswe -children {Button.label -sticky nswe} Style map: -foreground { pressed systemLabelColor !pressed systemSecondaryLabelColor } Layout: InlineButton.button -sticky nswe -children {Button.padding -sticky nswe -children {Button.label -sticky nswe}} Style map: -foreground { disabled systemWindowBackgroundColor } Layout: Treeitem.padding -sticky nswe -children {Treeitem.indicator -side left -sticky {} Treeitem.image -side left -sticky {} Treeitem.text -side left -sticky {}} Layout: Label.fill -sticky nswe -children {Label.text -sticky nswe} Layout: RecessedButton.button -sticky nswe -children {Button.padding -sticky nswe -children {Button.label -sticky nswe}} Style map: -font { selected RecessedFont active RecessedFont pressed RecessedFont } -foreground { {disabled selected} systemWindowBackgroundColor3 {disabled !selected} systemDisabledControlTextColor selected systemTextBackgroundColor active white pressed white } Layout: RoundedRectButton.button -sticky nswe -children {Button.padding -sticky nswe -children {Button.label -sticky nswe}} Layout: Searchbox.field -sticky nswe -border 1 -children {Entry.padding -sticky nswe -children {Entry.textarea -sticky nswe}} Layout: SidebarButton.button -sticky nswe -children {Button.padding -sticky nswe -children {Button.label -sticky nswe}} Style map: -foreground { {disabled selected} systemWindowBackgroundColor3 {disabled !selected} systemDisabledControlTextColor selected systemTextColor active systemTextColor pressed systemTextColor } Layout: Button.button -sticky nswe -children {Button.padding -sticky nswe -children {Button.label -sticky nswe}} Style map: -foreground { pressed white {alternate !pressed !background} white disabled systemDisabledControlTextColor} Layout: Checkbutton.button -sticky nswe -children {Checkbutton.padding -sticky nswe -children {Checkbutton.label -side left -sticky {}}} Layout: Combobox.button -sticky nswe -children {Combobox.padding -sticky nswe -children {Combobox.textarea -sticky nswe}} Style map: -foreground { disabled systemDisabledControlTextColor } -selectbackground { !focus systemUnemphasizedSelectedTextBackgroundColor } Layout: Entry.field -sticky nswe -border 1 -children {Entry.padding -sticky nswe -children {Entry.textarea -sticky nswe}} Style map: -foreground { disabled systemDisabledControlTextColor } -selectbackground { !focus systemUnemphasizedSelectedTextBackgroundColor } Layout: Labelframe.border -sticky nswe Layout: Label.fill -sticky nswe -children {Label.text -sticky nswe} Layout: Menubutton.button -sticky nswe -children {Menubutton.padding -sticky nswe -children {Menubutton.label -side left -sticky {}}} Layout: Notebook.client -sticky nswe Layout: Notebook.tab -sticky nswe -children {Notebook.padding -sticky nswe -children {Notebook.label -sticky nswe}} Style map: -foreground { {background !selected} systemControlTextColor {background selected} black {!background selected} systemSelectedTabTextColor disabled systemDisabledControlTextColor} Layout: Progressbar.track -sticky nswe Layout: Radiobutton.button -sticky nswe -children {Radiobutton.padding -sticky nswe -children {Radiobutton.label -side left -sticky {}}} - Layout: Spinbox.buttons -side right -sticky {} -children {Spinbox.uparrow -side top -sticky e Spinbox.downarrow -side bottom -sticky e} Spinbox.field -sticky we -children {Spinbox.textarea -sticky we} Style map: -foreground { disabled systemDisabledControlTextColor } -selectbackground { !focus systemUnemphasizedSelectedTextBackgroundColor } Layout: Notebook.tab -sticky nswe -children {Notebook.padding -sticky nswe -children {Notebook.label -sticky nswe}} Layout: Toolbar.background -sticky nswe Layout: Toolbutton.border -sticky nswe -children {Toolbutton.focus -sticky nswe -children {Toolbutton.padding -sticky nswe -children {Toolbutton.label -sticky nswe}}} Layout: Treeview.field -sticky nswe -children {Treeview.padding -sticky nswe -children {Treeview.treearea -sticky nswe}} Style map: -background { selected systemSelectedTextBackgroundColor } Layout: Vertical.Scrollbar.trough -sticky ns -children {Vertical.Scrollbar.thumb -sticky nswe Vertical.Scrollbar.downarrow -side bottom -sticky {} Vertical.Scrollbar.uparrow -side bottom -sticky {}} "Checkbutton.indicator" style element options: "Combobox.field" style element options: "Radiobutton.indicator" style element options: "Spinbox.downarrow" style element options: "Spinbox.uparrow" style element options: "arrow" style element options: "bar" style element options: "border" style element options: "client" style element options: "downarrow" style element options: "field" style element options: "hgrip" style element options: "leftarrow" style element options: "pbar" style element options: "rightarrow" style element options: "slider" style element options: "tab" style element options: "thumb" style element options: "trough" style element options: "uparrow" style element options: "vgrip" style element options: "clam" theme style list Style map: -selectforeground {!focus white} -foreground {disabled #999999} -selectbackground {!focus #9e9a91} -background {disabled #dcdad5 active #eeebe7} Layout: ComboboxPopdownFrame.border -sticky nswe Layout: Treeheading.cell -sticky nswe Treeheading.border -sticky nswe -children {Treeheading.padding -sticky nswe -children {Treeheading.image -side right -sticky {} Treeheading.text -sticky we}} Layout: Sash.hsash -sticky nswe -children {Sash.hgrip -sticky nswe} Layout: Treeitem.padding -sticky nswe -children {Treeitem.indicator -side left -sticky {} Treeitem.image -side left -sticky {} Treeitem.text -sticky nswe} - Layout: Treeitem.separator -sticky nswe Layout: Button.border -sticky nswe -border 1 -children {Button.focus -sticky nswe -children {Button.padding -sticky nswe -children {Button.label -sticky nswe}}} Style map: -lightcolor {pressed #bab5ab} -background {disabled #dcdad5 pressed #bab5ab active #eeebe7} -bordercolor {alternate #000000} -darkcolor {pressed #bab5ab} Layout: Checkbutton.padding -sticky nswe -children {Checkbutton.indicator -side left -sticky {} Checkbutton.focus -side left -sticky w -children {Checkbutton.label -sticky nswe}} Style map: -indicatorbackground {pressed #dcdad5 {!disabled alternate} #5895bc {disabled alternate} #a0a0a0 disabled #dcdad5} Layout: Combobox.downarrow -side right -sticky ns Combobox.field -sticky nswe -children {Combobox.padding -sticky nswe -children {Combobox.textarea -sticky nswe}} Style map: -foreground {{readonly focus} #ffffff} -fieldbackground {{readonly focus} #4a6984 readonly #dcdad5} -background {active #eeebe7 pressed #eeebe7} -bordercolor {focus #4a6984} -arrowcolor {disabled #999999} Layout: Entry.field -sticky nswe -border 1 -children {Entry.padding -sticky nswe -children {Entry.textarea -sticky nswe}} Style map: -lightcolor {focus #6f9dc6} -background {readonly #dcdad5} -bordercolor {focus #4a6984} Layout: Labelframe.border -sticky nswe Layout: Menubutton.border -sticky nswe -children {Menubutton.focus -sticky nswe -children {Menubutton.indicator -side right -sticky {} Menubutton.padding -sticky we -children {Menubutton.label -side left -sticky {}}}} Layout: Notebook.tab -sticky nswe -children {Notebook.padding -side top -sticky nswe -children {Notebook.focus -side top -sticky nswe -children {Notebook.label -side top -sticky {}}}} Style map: -lightcolor {selected #eeebe7 {} #cfcdc8} -padding {selected {4.5p 3p 4.5p 1.5p}} -background {selected #dcdad5 {} #bab5ab} - Layout: Radiobutton.padding -sticky nswe -children {Radiobutton.indicator -side left -sticky {} Radiobutton.focus -side left -sticky {} -children {Radiobutton.label -sticky nswe}} Style map: -indicatorbackground {pressed #dcdad5 {!disabled alternate} #5895bc {disabled alternate} #a0a0a0 disabled #dcdad5} - - Layout: Spinbox.field -side top -sticky we -children {null -side right -sticky {} -children {Spinbox.uparrow -side top -sticky e Spinbox.downarrow -side bottom -sticky e} Spinbox.padding -sticky nswe -children {Spinbox.textarea -sticky nswe}} Style map: -background {readonly #dcdad5} -bordercolor {focus #4a6984} -arrowcolor {disabled #999999} Layout: Notebook.tab -sticky nswe -children {Notebook.padding -side top -sticky nswe -children {Notebook.focus -side top -sticky nswe -children {Notebook.label -side top -sticky {}}}} Layout: Toolbutton.border -sticky nswe -children {Toolbutton.focus -sticky nswe -children {Toolbutton.padding -sticky nswe -children {Toolbutton.label -sticky nswe}}} Style map: -lightcolor {pressed #bab5ab} -relief {disabled flat selected sunken pressed sunken active raised} -background {disabled #dcdad5 pressed #bab5ab active #eeebe7} -darkcolor {pressed #bab5ab} Layout: Treeview.field -sticky nswe -border 1 -children {Treeview.padding -sticky nswe -children {Treeview.treearea -sticky nswe}} Style map: -foreground {disabled #999999 selected #ffffff} -background {disabled #dcdad5 selected #4a6984} -bordercolor {focus #4a6984} Layout: Treeitem.separator -sticky nswe Layout: Sash.vsash -sticky nswe -children {Sash.vgrip -sticky nswe} "Button.border" style element options: "Checkbutton.indicator" style element options: "Combobox.downarrow" style element options: "Menubutton.indicator" style element options: "Radiobutton.indicator" style element options: "Spinbox.downarrow" style element options: "Spinbox.uparrow" style element options: "arrow" style element options: "downarrow" style element options: "highlight" style element options: "hsash" style element options: "leftarrow" style element options: "rightarrow" style element options: "slider" style element options: "uparrow" style element options: "vsash" style element options: "classic" theme style list Style map: -highlightcolor {focus black} -foreground {disabled #a3a3a3} -background {disabled #d9d9d9 active #ececec} Layout: ComboboxPopdownFrame.border -sticky nswe Layout: Treeheading.cell -sticky nswe Treeheading.border -sticky nswe -children {Treeheading.padding -sticky nswe -children {Treeheading.image -side right -sticky {} Treeheading.text -sticky we}} Layout: Horizontal.Scale.highlight -sticky nswe -children {Horizontal.Scale.trough -sticky nswe -children {Horizontal.Scale.slider -side left -sticky {}}} Layout: Treeitem.padding -sticky nswe -children {Treeitem.indicator -side left -sticky {} Treeitem.image -side left -sticky {} Treeitem.text -sticky nswe} - Layout: Treeitem.separator -sticky nswe Layout: Button.highlight -sticky nswe -children {Button.border -sticky nswe -border 1 -children {Button.padding -sticky nswe -children {Button.label -sticky nswe}}} Style map: -relief {{!disabled pressed} sunken} Layout: Checkbutton.highlight -sticky nswe -children {Checkbutton.border -sticky nswe -children {Checkbutton.padding -sticky nswe -children {Checkbutton.indicator -side left -sticky {} Checkbutton.label -side left -sticky nswe}}} Style map: -indicatorrelief {alternate raised selected sunken pressed sunken} -indicatorcolor {pressed #d9d9d9 alternate #b05e5e selected #b03060} Layout: Combobox.highlight -sticky nswe -children {Combobox.field -sticky nswe -children {Combobox.downarrow -side right -sticky ns Combobox.padding -sticky nswe -children {Combobox.textarea -sticky nswe}}} Style map: -fieldbackground {readonly #d9d9d9 disabled #d9d9d9} Layout: Entry.highlight -sticky nswe -children {Entry.field -sticky nswe -border 1 -children {Entry.padding -sticky nswe -children {Entry.textarea -sticky nswe}}} Style map: -fieldbackground {readonly #d9d9d9 disabled #d9d9d9} Layout: Labelframe.border -sticky nswe Layout: Menubutton.highlight -sticky nswe -children {Menubutton.border -sticky nswe -children {Menubutton.indicator -side right -sticky {} Menubutton.padding -sticky we -children {Menubutton.label -sticky {}}}} Layout: Notebook.tab -sticky nswe -children {Notebook.padding -side top -sticky nswe -children {Notebook.focus -side top -sticky nswe -children {Notebook.label -side top -sticky {}}}} Style map: -background {selected #d9d9d9} - Layout: Radiobutton.highlight -sticky nswe -children {Radiobutton.border -sticky nswe -children {Radiobutton.padding -sticky nswe -children {Radiobutton.indicator -side left -sticky {} Radiobutton.label -side left -sticky nswe}}} Style map: -indicatorrelief {alternate raised selected sunken pressed sunken} -indicatorcolor {pressed #d9d9d9 alternate #b05e5e selected #b03060} Style map: -sliderrelief {{pressed !disabled} sunken} Style map: -relief {{pressed !disabled} sunken} Layout: Spinbox.highlight -sticky nswe -children {Spinbox.field -sticky nswe -children {null -side right -sticky {} -children {Spinbox.uparrow -side top -sticky e Spinbox.downarrow -side bottom -sticky e} Spinbox.padding -sticky nswe -children {Spinbox.textarea -sticky nswe}}} Style map: -fieldbackground {readonly #d9d9d9 disabled #d9d9d9} Layout: Notebook.tab -sticky nswe -children {Notebook.padding -side top -sticky nswe -children {Notebook.focus -side top -sticky nswe -children {Notebook.label -side top -sticky {}}}} Layout: Toolbutton.focus -sticky nswe -children {Toolbutton.border -sticky nswe -children {Toolbutton.padding -sticky nswe -children {Toolbutton.label -sticky nswe}}} Style map: -relief {disabled flat selected sunken pressed sunken active raised} -background {pressed #b3b3b3 active #ececec} Layout: Treeview.highlight -sticky nswe -children {Treeview.field -sticky nswe -border 1 -children {Treeview.padding -sticky nswe -children {Treeview.treearea -sticky nswe}}} Style map: -foreground {disabled #a3a3a3 selected #000000} -background {disabled #d9d9d9 selected #c3c3c3} Layout: Treeitem.separator -sticky nswe Layout: Vertical.Scale.highlight -sticky nswe -children {Vertical.Scale.trough -sticky nswe -children {Vertical.Scale.slider -side top -sticky {}}} "" style element options: "Checkbutton.indicator" style element options: "Combobox.downarrow" style element options: "Menubutton.indicator" style element options: "Radiobutton.indicator" style element options: "Spinbox.downarrow" style element options: "Spinbox.uparrow" style element options: "Treeheading.cell" style element options: "Treeitem.indicator" style element options: "Treeitem.row" style element options: "Treeitem.separator" style element options: "arrow" style element options: "background" style element options: "border" style element options: "client" style element options: "ctext" style element options: "downarrow" style element options: "field" style element options: "fill" style element options: "focus" style element options: "hsash" style element options: "hseparator" style element options: "image" style element options: "indicator" style element options: "label" style element options: "leftarrow" style element options: "padding" style element options: "pbar" style element options: "rightarrow" style element options: "separator" style element options: "sizegrip" style element options: "slider" style element options: "tab" style element options: "text" style element options: "textarea" style element options: "thumb" style element options: "treearea" style element options: "trough" style element options: "uparrow" style element options: "vsash" style element options: "vseparator" style element options: "default" theme style list Style map: -foreground {disabled #a3a3a3} -background {disabled #edeceb active #ececec} Layout: Treedata.padding -sticky nswe -children {Treeitem.image -side left -sticky {} Treeitem.text -sticky nswe} Layout: ComboboxPopdownFrame.border -sticky nswe Layout: Treeheading.cell -sticky nswe Treeheading.border -sticky nswe -children {Treeheading.padding -sticky nswe -children {Treeheading.image -side right -sticky {} Treeheading.text -sticky we}} Layout: Sash.hsash -sticky we Layout: Horizontal.Progressbar.trough -sticky nswe -children {Horizontal.Progressbar.pbar -side left -sticky ns Horizontal.Progressbar.ctext -side left -sticky {}} Layout: Horizontal.Scale.focus -sticky nswe -children {Horizontal.Scale.padding -sticky nswe -children {Horizontal.Scale.trough -sticky nswe -children {Horizontal.Scale.slider -side left -sticky {}}}} Layout: Horizontal.Scrollbar.trough -sticky we -children {Horizontal.Scrollbar.leftarrow -side left -sticky {} Horizontal.Scrollbar.rightarrow -side right -sticky {} Horizontal.Scrollbar.thumb -sticky nswe} Layout: Treeitem.padding -sticky nswe -children {Treeitem.indicator -side left -sticky {} Treeitem.image -side left -sticky {} Treeitem.text -sticky nswe} Layout: Label.fill -sticky nswe -children {Label.text -sticky nswe} Layout: Treeitem.row -sticky nswe - Layout: Treeitem.separator -sticky nswe Layout: Button.border -sticky nswe -border 1 -children {Button.focus -sticky nswe -children {Button.padding -sticky nswe -children {Button.label -sticky nswe}}} Style map: -relief {{!disabled pressed} sunken} Layout: Checkbutton.padding -sticky nswe -children {Checkbutton.indicator -side left -sticky {} Checkbutton.focus -side left -sticky w -children {Checkbutton.label -sticky nswe}} Style map: -indicatorbackground {{alternate disabled} #a3a3a3 {alternate pressed} #5895bc alternate #4a6984 {selected disabled} #a3a3a3 {selected pressed} #5895bc selected #4a6984 disabled #edeceb pressed #c3c3c3} Layout: Combobox.field -sticky nswe -children {Combobox.downarrow -side right -sticky ns Combobox.padding -sticky nswe -children {Combobox.textarea -sticky nswe}} Style map: -fieldbackground {readonly #edeceb disabled #edeceb} -arrowcolor {disabled #a3a3a3} Layout: Entry.field -sticky nswe -border 1 -children {Entry.padding -sticky nswe -children {Entry.textarea -sticky nswe}} Style map: -fieldbackground {readonly #edeceb disabled #edeceb} Layout: Frame.border -sticky nswe Layout: Label.border -sticky nswe -border 1 -children {Label.padding -sticky nswe -border 1 -children {Label.label -sticky nswe}} Layout: Labelframe.border -sticky nswe Layout: Menubutton.border -sticky nswe -children {Menubutton.focus -sticky nswe -children {Menubutton.indicator -side right -sticky {} Menubutton.padding -sticky we -children {Menubutton.label -side left -sticky {}}}} Style map: -arrowcolor {disabled #a3a3a3} Layout: Notebook.client -sticky nswe Layout: Notebook.tab -sticky nswe -children {Notebook.padding -side top -sticky nswe -children {Notebook.focus -side top -sticky nswe -children {Notebook.label -side top -sticky {}}}} Style map: -highlightcolor {selected #4a6984} -highlight {selected 1} -background {selected #edeceb} Layout: Panedwindow.background -sticky {} - Layout: Radiobutton.padding -sticky nswe -children {Radiobutton.indicator -side left -sticky {} Radiobutton.focus -side left -sticky {} -children {Radiobutton.label -sticky nswe}} Style map: -indicatorbackground {{alternate disabled} #a3a3a3 {alternate pressed} #5895bc alternate #4a6984 {selected disabled} #a3a3a3 {selected pressed} #5895bc selected #4a6984 disabled #edeceb pressed #c3c3c3} Style map: -outercolor {active #ececec} Style map: -arrowcolor {disabled #a3a3a3} Layout: Separator.separator -sticky nswe Layout: Sizegrip.sizegrip -side bottom -sticky se Layout: Spinbox.field -side top -sticky we -children {null -side right -sticky {} -children {Spinbox.uparrow -side top -sticky e Spinbox.downarrow -side bottom -sticky e} Spinbox.padding -sticky nswe -children {Spinbox.textarea -sticky nswe}} Style map: -fieldbackground {readonly #edeceb disabled #edeceb} -arrowcolor {disabled #a3a3a3} Layout: Notebook.tab -sticky nswe -children {Notebook.padding -side top -sticky nswe -children {Notebook.focus -side top -sticky nswe -children {Notebook.label -side top -sticky {}}}} Layout: Toolbutton.border -sticky nswe -children {Toolbutton.focus -sticky nswe -children {Toolbutton.padding -sticky nswe -children {Toolbutton.label -sticky nswe}}} Style map: -relief {disabled flat selected sunken pressed sunken active raised} -background {pressed #c3c3c3 active #ececec} Layout: Treeview.field -sticky nswe -border 1 -children {Treeview.padding -sticky nswe -children {Treeview.treearea -sticky nswe}} Style map: -foreground {disabled #a3a3a3 selected #ffffff} -background {disabled #edeceb selected #4a6984} Layout: Treeitem.separator -sticky nswe Layout: Sash.vsash -sticky ns Layout: Vertical.Progressbar.trough -sticky nswe -children {Vertical.Progressbar.pbar -side bottom -sticky we} Layout: Vertical.Scale.focus -sticky nswe -children {Vertical.Scale.padding -sticky nswe -children {Vertical.Scale.trough -sticky nswe -children {Vertical.Scale.slider -side top -sticky {}}}} Layout: Vertical.Scrollbar.trough -sticky ns -children {Vertical.Scrollbar.uparrow -side top -sticky {} Vertical.Scrollbar.downarrow -side bottom -sticky {} Vertical.Scrollbar.thumb -sticky nswe}PASS "Combobox.background" style element options: "Combobox.border" style element options: "Combobox.rightdownarrow" style element options: "ComboboxPopdownFrame.background" style element options: "Entry.background" style element options: "Entry.field" style element options: "Horizontal.Progressbar.pbar" style element options: "Horizontal.Scale.slider" style element options: "Horizontal.Scrollbar.grip" style element options: "Horizontal.Scrollbar.leftarrow" style element options: "Horizontal.Scrollbar.rightarrow" style element options: "Horizontal.Scrollbar.thumb" style element options: "Horizontal.Scrollbar.trough" style element options: "Menubutton.dropdown" style element options: "Spinbox.background" style element options: "Spinbox.downarrow" style element options: "Spinbox.field" style element options: "Spinbox.innerbg" style element options: "Spinbox.uparrow" style element options: "Vertical.Progressbar.pbar" style element options: "Vertical.Scale.slider" style element options: "Vertical.Scrollbar.downarrow" style element options: "Vertical.Scrollbar.grip" style element options: "Vertical.Scrollbar.thumb" style element options: "Vertical.Scrollbar.trough" style element options: "Vertical.Scrollbar.uparrow" style element options: "vista" theme style list Style map: -foreground {disabled SystemGrayText} Layout: ComboboxPopdownFrame.background -sticky nswe -border 1 -children {ComboboxPopdownFrame.padding -sticky nswe} Layout: Treeheading.cell -sticky nswe Treeheading.border -sticky nswe -children {Treeheading.padding -sticky nswe -children {Treeheading.image -side right -sticky {} Treeheading.text -sticky we}} Layout: Horizontal.Progressbar.trough -sticky nswe -children {Horizontal.Progressbar.pbar -side left -sticky ns Horizontal.Progressbar.ctext -sticky nswe} Layout: Scale.focus -sticky nswe -children {Horizontal.Scale.trough -sticky nswe -children {Horizontal.Scale.track -sticky we Horizontal.Scale.slider -side left -sticky {}}} Layout: Treeitem.padding -sticky nswe -children {Treeitem.indicator -side left -sticky {} Treeitem.image -side left -sticky {} Treeitem.text -sticky nswe} Layout: Label.fill -sticky nswe -children {Label.text -sticky nswe} Layout: Treeitem.separator -sticky nswe Layout: Button.button -sticky nswe -children {Button.focus -sticky nswe -children {Button.padding -sticky nswe -children {Button.label -sticky nswe}}} Layout: Checkbutton.padding -sticky nswe -children {Checkbutton.indicator -side left -sticky {} Checkbutton.focus -side left -sticky w -children {Checkbutton.label -sticky nswe}} Layout: Combobox.border -sticky nswe -children {Combobox.rightdownarrow -side right -sticky ns Combobox.padding -sticky nswe -children {Combobox.background -sticky nswe -children {Combobox.focus -sticky nswe -children {Combobox.textarea -sticky nswe}}}} Style map: -focusfill {{readonly focus} SystemHighlight} -foreground {disabled SystemGrayText {readonly focus} SystemHighlightText} -selectforeground {!focus SystemWindowText} -selectbackground {!focus SystemWindow} Layout: Entry.field -sticky nswe -children {Entry.background -sticky nswe -children {Entry.padding -sticky nswe -children {Entry.textarea -sticky nswe}}} Style map: -selectforeground {!focus SystemWindowText} -selectbackground {!focus SystemWindow} Layout: Label.fill -sticky nswe -children {Label.text -sticky nswe} Layout: Menubutton.dropdown -side right -sticky ns Menubutton.button -sticky nswe -children {Menubutton.padding -sticky we -children {Menubutton.label -sticky {}}} Layout: Notebook.client -sticky nswe Layout: Notebook.tab -sticky nswe -children {Notebook.padding -side top -sticky nswe -children {Notebook.focus -side top -sticky nswe -children {Notebook.label -side top -sticky {}}}} Style map: -expand {selected {2 2 2 2}} - Layout: Radiobutton.padding -sticky nswe -children {Radiobutton.indicator -side left -sticky {} Radiobutton.focus -side left -sticky {} -children {Radiobutton.label -sticky nswe}} - Layout: Spinbox.field -sticky nswe -children {Spinbox.background -sticky nswe -children {Spinbox.padding -sticky nswe -children {Spinbox.innerbg -sticky nswe -children {Spinbox.textarea -sticky nswe}} Spinbox.uparrow -side top -sticky nse Spinbox.downarrow -side bottom -sticky nse}} Style map: -selectforeground {!focus SystemWindowText} -selectbackground {!focus SystemWindow} Layout: Notebook.tab -sticky nswe -children {Notebook.padding -side top -sticky nswe -children {Notebook.focus -side top -sticky nswe -children {Notebook.label -side top -sticky {}}}} Layout: Toolbutton.border -sticky nswe -children {Toolbutton.focus -sticky nswe -children {Toolbutton.padding -sticky nswe -children {Toolbutton.label -sticky nswe}}} Layout: Treeview.field -sticky nswe -border 1 -children {Treeview.padding -sticky nswe -children {Treeview.treearea -sticky nswe}} Style map: -foreground {disabled SystemGrayText selected SystemHighlightText} -background {disabled SystemButtonFace selected SystemHighlight} Layout: Treeitem.separator -sticky nswe Layout: Vertical.Progressbar.trough -sticky nswe -children {Vertical.Progressbar.pbar -side bottom -sticky we} Layout: Scale.focus -sticky nswe -children {Vertical.Scale.trough -sticky nswe -children {Vertical.Scale.track -sticky ns Vertical.Scale.slider -side top -sticky {}}} "Button.border" style element options: "Checkbutton.indicator" style element options: "Combobox.focus" style element options: "ComboboxPopdownFrame.border" style element options: "Radiobutton.indicator" style element options: "Scrollbar.trough" style element options: "Spinbox.downarrow" style element options: "Spinbox.uparrow" style element options: "border" style element options: "client" style element options: "downarrow" style element options: "field" style element options: "focus" style element options: "leftarrow" style element options: "rightarrow" style element options: "sizegrip" style element options: "slider" style element options: "tab" style element options: "thumb" style element options: "uparrow" style element options: "winnative" theme style list Style map: -foreground {disabled SystemGrayText} -embossed {disabled 1} Layout: ComboboxPopdownFrame.border -sticky nswe Layout: Treeheading.cell -sticky nswe Treeheading.border -sticky nswe -children {Treeheading.padding -sticky nswe -children {Treeheading.image -side right -sticky {} Treeheading.text -sticky we}} Layout: Treeitem.padding -sticky nswe -children {Treeitem.indicator -side left -sticky {} Treeitem.image -side left -sticky {} Treeitem.text -sticky nswe} Layout: Label.fill -sticky nswe -children {Label.text -sticky nswe} Layout: Treeitem.separator -sticky nswe Layout: Button.border -sticky nswe -children {Button.padding -sticky nswe -children {Button.label -sticky nswe}} Style map: -relief {{!disabled pressed} sunken} Layout: Checkbutton.padding -sticky nswe -children {Checkbutton.indicator -side left -sticky {} Checkbutton.focus -side left -sticky w -children {Checkbutton.label -sticky nswe}} Layout: Combobox.field -sticky nswe -children {Combobox.downarrow -side right -sticky ns Combobox.padding -sticky nswe -children {Combobox.focus -sticky nswe -children {Combobox.textarea -sticky nswe}}} Style map: -focusfill {{readonly focus} SystemHighlight} -foreground {disabled SystemGrayText {readonly focus} SystemHighlightText} -selectforeground {!focus SystemWindowText} -fieldbackground {readonly SystemButtonFace disabled SystemButtonFace} -selectbackground {!focus SystemWindow} Layout: Entry.field -sticky nswe -border 1 -children {Entry.padding -sticky nswe -children {Entry.textarea -sticky nswe}} Style map: -selectforeground {!focus SystemWindowText} -selectbackground {!focus SystemWindow} -fieldbackground {readonly SystemButtonFace disabled SystemButtonFace} Layout: Labelframe.border -sticky nswe Layout: Label.fill -sticky nswe -children {Label.text -sticky nswe} Layout: Menubutton.border -sticky nswe -children {Menubutton.focus -sticky nswe -children {Menubutton.indicator -side right -sticky {} Menubutton.padding -sticky we -children {Menubutton.label -side left -sticky {}}}} Layout: Notebook.client -sticky nswe Layout: Notebook.tab -sticky nswe -children {Notebook.padding -side top -sticky nswe -children {Notebook.focus -side top -sticky nswe -children {Notebook.label -side top -sticky {}}}} Style map: -expand {selected {2 2 2 0}} - Layout: Radiobutton.padding -sticky nswe -children {Radiobutton.indicator -side left -sticky {} Radiobutton.focus -side left -sticky {} -children {Radiobutton.label -sticky nswe}} - Layout: Spinbox.field -side top -sticky we -children {null -side right -sticky {} -children {Spinbox.uparrow -side top -sticky e Spinbox.downarrow -side bottom -sticky e} Spinbox.padding -sticky nswe -children {Spinbox.textarea -sticky nswe}} Layout: Notebook.tab -sticky nswe -children {Notebook.padding -side top -sticky nswe -children {Notebook.focus -side top -sticky nswe -children {Notebook.label -side top -sticky {}}}} Layout: Toolbutton.border -sticky nswe -children {Toolbutton.focus -sticky nswe -children {Toolbutton.padding -sticky nswe -children {Toolbutton.label -sticky nswe}}} Style map: -relief {disabled flat selected sunken pressed sunken active raised} Layout: Treeview.field -sticky nswe -border 1 -children {Treeview.padding -sticky nswe -children {Treeview.treearea -sticky nswe}} Style map: -foreground {disabled SystemGrayText selected SystemHighlightText} -background {disabled SystemButtonFace selected SystemHighlight} Layout: Treeitem.separator -sticky nswe "Button.button" style element options: "Checkbutton.indicator" style element options: "Combobox.downarrow" style element options: "Combobox.field" style element options: "Entry.field" style element options: "Horizontal.Progressbar.pbar" style element options: "Horizontal.Progressbar.trough" style element options: "Horizontal.Scale.slider" style element options: "Horizontal.Scale.track" style element options: "Horizontal.Scrollbar.grip" style element options: "Horizontal.Scrollbar.thumb" style element options: "Horizontal.Scrollbar.trough" style element options: "Labelframe.border" style element options: "Menubutton.button" style element options: "Menubutton.dropdown" style element options: "NotebookPane.background" style element options: "Radiobutton.indicator" style element options: "Scale.trough" style element options: "Scrollbar.downarrow" style element options: "Scrollbar.leftarrow" style element options: "Scrollbar.rightarrow" style element options: "Scrollbar.uparrow" style element options: "Spinbox.downarrow" style element options: "Spinbox.field" style element options: "Spinbox.uparrow" style element options: "Toolbutton.border" style element options: "Treeheading.border" style element options: "Treeitem.indicator" style element options: "Treeview.field" style element options: "Vertical.Progressbar.pbar" style element options: "Vertical.Progressbar.trough" style element options: "Vertical.Scale.slider" style element options: "Vertical.Scale.track" style element options: "Vertical.Scrollbar.grip" style element options: "Vertical.Scrollbar.thumb" style element options: "Vertical.Scrollbar.trough" style element options: "client" style element options: "sizegrip" style element options: "tab" style element options: "xpnative" theme style list Style map: -foreground {disabled SystemGrayText} Layout: Treeheading.cell -sticky nswe Treeheading.border -sticky nswe -children {Treeheading.padding -sticky nswe -children {Treeheading.image -side right -sticky {} Treeheading.text -sticky we}} Layout: Scale.focus -sticky nswe -children {Horizontal.Scale.trough -sticky nswe -children {Horizontal.Scale.track -sticky we Horizontal.Scale.slider -side left -sticky {}}} Layout: Horizontal.Scrollbar.trough -sticky we -children {Horizontal.Scrollbar.leftarrow -side left -sticky {} Horizontal.Scrollbar.rightarrow -side right -sticky {} Horizontal.Scrollbar.thumb -sticky nswe -unit 1 -children {Horizontal.Scrollbar.grip -sticky {}}} Layout: Treeitem.padding -sticky nswe -children {Treeitem.indicator -side left -sticky {} Treeitem.image -side left -sticky {} Treeitem.text -sticky nswe} Layout: Label.fill -sticky nswe -children {Label.text -sticky nswe} Layout: Treeitem.separator -sticky nswe Layout: Button.button -sticky nswe -children {Button.focus -sticky nswe -children {Button.padding -sticky nswe -children {Button.label -sticky nswe}}} Layout: Checkbutton.padding -sticky nswe -children {Checkbutton.indicator -side left -sticky {} Checkbutton.focus -side left -sticky w -children {Checkbutton.label -sticky nswe}} Layout: Combobox.field -sticky nswe -children {Combobox.downarrow -side right -sticky ns Combobox.padding -sticky nswe -children {Combobox.focus -sticky nswe -children {Combobox.textarea -sticky nswe}}} Style map: -focusfill {{readonly focus} SystemHighlight} -foreground {disabled SystemGrayText {readonly focus} SystemHighlightText} -selectforeground {!focus SystemWindowText} -selectbackground {!focus SystemWindow} Layout: Entry.field -sticky nswe -border 1 -children {Entry.padding -sticky nswe -children {Entry.textarea -sticky nswe}} Style map: -selectforeground {!focus SystemWindowText} -selectbackground {!focus SystemWindow} Layout: Label.fill -sticky nswe -children {Label.text -sticky nswe} Layout: Menubutton.dropdown -side right -sticky ns Menubutton.button -sticky nswe -children {Menubutton.padding -sticky we -children {Menubutton.label -sticky {}}} Layout: Notebook.client -sticky nswe Layout: Notebook.tab -sticky nswe -children {Notebook.padding -side top -sticky nswe -children {Notebook.focus -side top -sticky nswe -children {Notebook.label -side top -sticky {}}}} Style map: -expand {selected {2 2 2 2}} - Layout: Radiobutton.padding -sticky nswe -children {Radiobutton.indicator -side left -sticky {} Radiobutton.focus -side left -sticky {} -children {Radiobutton.label -sticky nswe}} - - Layout: Spinbox.field -side top -sticky we -children {null -side right -sticky {} -children {Spinbox.uparrow -side top -sticky e Spinbox.downarrow -side bottom -sticky e} Spinbox.padding -sticky nswe -children {Spinbox.textarea -sticky nswe}} Style map: -selectforeground {!focus SystemWindowText} -selectbackground {!focus SystemWindow} Layout: Notebook.tab -sticky nswe -children {Notebook.padding -side top -sticky nswe -children {Notebook.focus -side top -sticky nswe -children {Notebook.label -side top -sticky {}}}} Layout: Toolbutton.border -sticky nswe -children {Toolbutton.focus -sticky nswe -children {Toolbutton.padding -sticky nswe -children {Toolbutton.label -sticky nswe}}} Layout: Treeview.field -sticky nswe -border 1 -children {Treeview.padding -sticky nswe -children {Treeview.treearea -sticky nswe}} Style map: -foreground {disabled SystemGrayText selected SystemHighlightText} -background {disabled SystemButtonFace selected SystemHighlight} Layout: Treeitem.separator -sticky nswe Layout: Scale.focus -sticky nswe -children {Vertical.Scale.trough -sticky nswe -children {Vertical.Scale.track -sticky ns Vertical.Scale.slider -side top -sticky {}}} Layout: Vertical.Scrollbar.trough -sticky ns -children {Vertical.Scrollbar.uparrow -side top -sticky {} Vertical.Scrollbar.downarrow -side bottom -sticky {} Vertical.Scrollbar.thumb -sticky nswe -unit 1 -children {Vertical.Scrollbar.grip -sticky {}}}PASS
Package osquery provides a non-obtrusive, idiomatic and easy-to-use query and aggregation builder for the official Go client (https://github.com/elastic/go-elasticsearch) for the ElasticSearch database (https://www.elastic.co/products/elasticsearch). osquery alleviates the need to use extremely nested maps (map[string]interface{}) and serializing queries to JSON manually. It also helps eliminating common mistakes such as misspelling query types, as everything is statically typed. Using `osquery` can make your code much easier to write, read and maintain, and significantly reduce the amount of code you write. osquery provides a method chaining-style API for building and executing queries and aggregations. It does not wrap the official Go client nor does it require you to change your existing code in order to integrate the library. Queries can be directly built with `osquery`, and executed by passing an `*elasticsearch.Client` instance (with optional search parameters). Results are returned as-is from the official client (e.g. `*esapi.Response` objects). Getting started is extremely simple: osquery currently supports version 7 of the ElasticSearch Go client. The library cannot currently generate "short queries". For example, whereas ElasticSearch can accept this: { "query": { "term": { "user": "Kimchy" } } } The library will always generate this: This is also true for queries such as "bool", where fields like "must" can either receive one query object, or an array of query objects. `osquery` will generate an array even if there's only one query object.
Package order provides ordered access to messages and maps.
Package firestore provides a client for reading and writing to a Cloud Firestore database. See https://cloud.google.com/firestore/docs for an introduction to Cloud Firestore and additional help on using the Firestore API. See https://godoc.org/cloud.google.com/go for authentication, timeouts, connection pooling and similar aspects of this package. Note: you can't use both Cloud Firestore and Cloud Datastore in the same project. To start working with this package, create a client with a project ID: In Firestore, documents are sets of key-value pairs, and collections are groups of documents. A Firestore database consists of a hierarchy of alternating collections and documents, referred to by slash-separated paths like "States/California/Cities/SanFrancisco". This client is built around references to collections and documents. CollectionRefs and DocumentRefs are lightweight values that refer to the corresponding database entities. Creating a ref does not involve any network traffic. Use DocumentRef.Get to read a document. The result is a DocumentSnapshot. Call its Data method to obtain the entire document contents as a map. You can also obtain a single field with DataAt, or extract the data into a struct with DataTo. With the type definition we can extract the document's data into a value of type State: Note that this client supports struct tags beginning with "firestore:" that work like the tags of the encoding/json package, letting you rename fields, ignore them, or omit their values when empty. To retrieve multiple documents from their references in a single call, use Client.GetAll. For writing individual documents, use the methods on DocumentReference. Create creates a new document. The first return value is a WriteResult, which contains the time at which the document was updated. Create fails if the document exists. Another method, Set, either replaces an existing document or creates a new one. To update some fields of an existing document, use Update. It takes a list of paths to update and their corresponding values. Use DocumentRef.Delete to delete a document. You can condition Deletes or Updates on when a document was last changed. Specify these preconditions as an option to a Delete or Update method. The check and the write happen atomically with a single RPC. Here we update a doc only if it hasn't changed since we read it. You could also do this with a transaction. To perform multiple writes at once, use a WriteBatch. Its methods chain for convenience. WriteBatch.Commit sends the collected writes to the server, where they happen atomically. You can use SQL to select documents from a collection. Begin with the collection, and build up a query using Select, Where and other methods of Query. Supported operators include `<`, `<=`, `>`, `>=`, `==`, and 'array-contains'. Call the Query's Documents method to get an iterator, and use it like the other Google Cloud Client iterators. To get all the documents in a collection, you can use the collection itself as a query. Use a transaction to execute reads and writes atomically. All reads must happen before any writes. Transaction creation, commit, rollback and retry are handled for you by the Client.RunTransaction method; just provide a function and use the read and write methods of the Transaction passed to it.
Apply a post processing filters to the Datastore/Firestore results mapped in struct with json tag or not. The filter format is designed to be passed in API param (query or path). The filters can express compound operation. During the processing the values to filter (an array) is passed to the library to apply the filters. A filter can be composed to several part: Each filter element must return OK for keeping the entry value. For this, 4 operators are allowed: It's possible to combine operators on the same key, for example k1 < 10 && k1 != 2. The same operator on the same key will raise an error. The filters are applicable on this list types and structures (and combination possibles): This library works with Go app and use reflection. It performs 3 things
Package gousb provides an low-level interface to attached USB devices. A Context manages all resources necessary for communicating with USB devices. Through the Context users can iterate over available USB devices. The USB standard defines a mechanism of discovering USB device functionality through descriptors. After the device is attached and initialized by the host stack, it's possible to retrieve its descriptor (the device descriptor). It contains elements such as product and vendor IDs, bus number and device number (address) on the bus. In gousb, the Device struct represents a USB device. The Device struct’s Desc field contains all known information about the device. Among other information in the device descriptor is a list of configuration descriptors, accessible through Device.Desc.Configs. The USB standard allows one physical USB device to switch between different sets of behaviors, or working modes, by selecting one of the offered configs (each device has at least one). This allows the same device to sometimes present itself as e.g. a 3G modem, and sometimes as a flash drive with the drivers for that 3G modem. Configs are mutually exclusive, each device can have only one active config at a time. Switching the active config performs a light-weight device reset. Each config in the device descriptor has a unique identification number. In gousb a device config needs to be selected through Device.Config(num). It returns a Config struct that represents the device in this particular configuration. The configuration descriptor is accessible through Config.Desc. A config descriptor determines the list of available USB interfaces on the device. Each interface is a virtual device within the physical USB device and its active config. There can be many interfaces active concurrently. Interfaces are enumerated sequentially starting from zero. Additionally, each interface comes with a number of alternate settings for the interface, which are somewhat similar to device configs, but on the interface level. Each interface can have only a single alternate setting active at any time. Alternate settings are enumerated sequentially starting from zero. In gousb an interface and its alternate setting can be selected through Config.Interface(num, altNum). The Interface struct is the representation of the claimed interface with a particular alternate setting. The descriptor of the interface is available through Interface.Setting. An interface with a particular alternate setting defines up to 30 data endpoints, each identified by a unique address. The endpoint address is a combination of endpoint number (1..15) and endpoint directionality (IN/OUT). IN endpoints have addresses 0x81..0x8f, while OUT endpoints 0x01..0x0f. An endpoint can be considered similar to a UDP/IP port, except the data transfers are unidirectional. Endpoints are represented by the Endpoint struct, and all defined endpoints can be obtained through the Endpoints field of the Interface.Setting. Each endpoint descriptor (EndpointDesc) defined in the interface's endpoint map includes information about the type of the endpoint: - endpoint address - endpoint number - direction: IN (device-to-host) or OUT (host-to-device) - transfer type: USB standard defines a few distinct data transfer types: --- bulk - high throughput, but no guaranteed bandwidth and no latency guarantees, --- isochronous - medium throughput, guaranteed bandwidth, some latency guarantees, --- interrupt - low throughput, high latency guarantees. The endpoint descriptor determines the type of the transfer that will be used. - maximum packet size: maximum number of bytes that can be sent or received by the device in a single USB transaction. and a few other less frequently used pieces of endpoint information. An IN Endpoint can be opened for reading through Interface.InEndpoint(epNum), while an OUT Endpoint can be opened for writing through Interface.OutEndpoint(epNum). An InEndpoint implements the io.Reader interface, an OutEndpoint implements the io.Writer interface. Both Reads and Writes will accept larger slices of data than the endpoint's maximum packet size, the transfer will be split into smaller USB transactions as needed. But using Read/Write size equal to an integer multiple of maximum packet size helps with improving the transfer performance. Apart from 15 possible data endpoints, each USB device also has a control endpoint. The control endpoint is present regardless of the current device config, claimed interfaces and their alternate settings. It makes a lot of sense, as the control endpoint is actually used, among others, to issue commands to switch the active config or select an alternate setting for an interface. Control commands are also often used to control the behavior of the device. There is no single standard for control commands though, and many devices implement their custom control command schema. Control commands can be issued through Device.Control(). For more information about USB protocol and handling USB devices, see the excellent "USB in a nutshell" guide: http://www.beyondlogic.org/usbnutshell/ This example demostrates the full API for accessing endpoints. It opens a device with a known VID/PID, switches the device to configuration #2, in that configuration it opens (claims) interface #3 with alternate setting #0. Within that interface setting it opens an IN endpoint number 6 and an OUT endpoint number 5, then starts copying data between them, This examples demonstrates the use of a few convenience functions that can be used in simple situations and with simple devices. It opens a device with a given VID/PID, claims the default interface (use the same config as currently active, interface 0, alternate setting 0) and tries to write 5 bytes of data to endpoint number 7.