HTML Parser

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package markdown implements markdown parser and HTML renderer. It parses markdown into AST format which can be serialized to HTML (using html.Renderer) or possibly other formats (using alternate renderers). The simplest way to convert markdown document to HTML You can customize parser and HTML renderer: For a cmd-line tool see https://github.com/rveen/mdtohtml

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package markdown implements markdown parser and HTML renderer. It parses markdown into AST format which can be serialized to HTML (using html.Renderer) or possibly other formats (using alternate renderers). The simplest way to convert markdown document to HTML You can customize parser and HTML renderer: For a cmd-line tool see https://github.com/gomarkdown/mdtohtml

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package markdown implements markdown parser and HTML renderer. It parses markdown into AST format which can be serialized to HTML (using html.Renderer) or possibly other formats (using alternate renderers). The simplest way to convert markdown document to HTML You can customize parser and HTML renderer: For a cmd-line tool see https://github.com/gomarkdown/mdtohtml

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package markdown implements markdown parser and HTML renderer. It parses markdown into AST format which can be serialized to HTML (using html.Renderer) or possibly other formats (using alternate renderers). The simplest way to convert markdown document to HTML You can customize parser and HTML renderer: For a cmd-line tool see https://github.com/gomarkdown/mdtohtml

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/diggernaut/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package html implements an HTML5-compliant tokenizer and parser. Tokenization is done by creating a Tokenizer for an io.Reader r. It is the caller's responsibility to ensure that r provides UTF-8 encoded HTML. Given a Tokenizer z, the HTML is tokenized by repeatedly calling z.Next(), which parses the next token and returns its type, or an error: There are two APIs for retrieving the current token. The high-level API is to call Token; the low-level API is to call Text or TagName / TagAttr. Both APIs allow optionally calling Raw after Next but before Token, Text, TagName, or TagAttr. In EBNF notation, the valid call sequence per token is: Token returns an independent data structure that completely describes a token. Entities (such as "<") are unescaped, tag names and attribute keys are lower-cased, and attributes are collected into a []Attribute. For example: The low-level API performs fewer allocations and copies, but the contents of the []byte values returned by Text, TagName and TagAttr may change on the next call to Next. For example, to extract an HTML page's anchor text: Parsing is done by calling Parse with an io.Reader, which returns the root of the parse tree (the document element) as a *Node. It is the caller's responsibility to ensure that the Reader provides UTF-8 encoded HTML. For example, to process each anchor node in depth-first order: The relevant specifications include: https://html.spec.whatwg.org/multipage/syntax.html and https://html.spec.whatwg.org/multipage/syntax.html#tokenization

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package robots implements robots.txt parsing and matching based on Google's specification. For a robots.txt primer, please read the full specification at: https://developers.google.com/search/reference/robots_txt. Clients of this package have one obligation: when testing whether a URL can be crawled, use the correct robots.txt file. The specification uses scheme, port, and punycode variations to define which URLs are in scope. To get the right robots.txt file, use Locate. Locate takes as its only argument the URL you want to access. It returns the URL of the robots.txt file that governs access. Locate will always return a single unique robots.txt URL for all input URLs sharing a scope. In practice, a client pattern for testing whether a URL is accessible would be: a) Locate the robots.txt file for the URL; b) check whether you have fetched data for that robots.txt file; c) if yes, use the data to Test the URL against your user agent; d) if no, fetch the robots.txt data and try again. For details, see "File location & range of validity" in the specification: https://developers.google.com/search/reference/robots_txt#file-location--range-of-validity. A generous parser is specified. A valid line is accepted, and an invalid line is silently discarded. This is true even if the content parsed is in an unexpected format, like HTML. For details, see "File format" in the specification: https://developers.google.com/search/reference/robots_txt#file-format The specification states that a crawler will assume all URLs are accessible, even if there is no robots.txt file, or the body of the robots.txt file is empty. So a robots.txt file with a 404 status code will result in all URLs being crawlable. The exception to this is a 5xx status code. This is treated as a temporary "full disallow" of crawling. For details, see "Handling HTTP result codes" in the specification: https://developers.google.com/search/reference/robots_txt#handling-http-result-codes

Package bbcode implements a parser and HTML generator for BBCode.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package markydown provides a parser for Markydown, a small subset of Markdown that is enough for my needs. YMMV. This is not a Markydown-to-HTML (or to any other format, for that matter) converter. The provided parser will simply call some methods of a user-supplied `Processor` object as it detects, for example, that a new paragraph started, the formatting changed or some text is to be "emitted". Example shows how to use the parser to create a simple Markydown-to-HTML converter. This gives an idea on how the parser works, but don't expect this coverter to be foolproof -- it is not!

Package bbcode implements a parser and HTML generator for BBCode.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package mail implements mail parser and generator. This package doesn't expose any email internals, but is suitable and easy to use in scenarios like parse message, convert html bits to text, determine customer by email address, create ticket in a ticket system and reply back with TT ID.

Package markdown implements markdown parser and HTML renderer. It parses markdown into AST format which can be serialized to HTML (using html.Renderer) or possibly other formats (using alternate renderers). The simplest way to convert markdown document to HTML You can customize parser and HTML renderer: For a cmd-line tool see https://github.com/kensanata/mdtohtml

Package libxml2 is an interface to libxml2 library, providing XML and HTML parsers with DOM interface. The inspiration is Perl5's XML::LibXML module. This library is still in very early stages of development. API may still change without notice. For the time being, the API is being written so that thye are as close as we can get to DOM Layer 3, but some methods will, for the time being, be punted and aliases for simpler methods that don't necessarily check for the DOM's correctness will be used. Also, the return values are still shaky -- I'm still debating how to handle error cases gracefully.

Package markdown implements markdown parser and HTML renderer. It parses markdown into AST format which can be serialized to HTML (using html.Renderer) or possibly other formats (using alternate renderers). The simplest way to convert markdown document to HTML You can customize parser and HTML renderer: For a cmd-line tool see https://github.com/gomarkdown/mdtohtml

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package libxml2 is an interface to libxml2 library, providing XML and HTML parsers with DOM interface. The inspiration is Perl5's XML::LibXML module. This library is still in very early stages of development. API may still change without notice. For the time being, the API is being written so that thye are as close as we can get to DOM Layer 3, but some methods will, for the time being, be punted and aliases for simpler methods that don't necessarily check for the DOM's correctness will be used. Also, the return values are still shaky -- I'm still debating how to handle error cases gracefully.

Package markdown implements markdown parser and HTML renderer. It parses markdown into AST format which can be serialized to HTML (using html.Renderer) or possibly other formats (using alternate renderers). The simplest way to convert markdown document to HTML You can customize parser and HTML renderer: For a cmd-line tool see https://github.com/louisun/mdtohtml