Profiling

Package ovirtclient provides a human-friendly Go client for the oVirt Engine. It provides an abstraction layer for the oVirt API, as well as a mocking facility for testing purposes. This documentation contains two parts. This introduction explains setting up the client with the credentials. The API doc contains the individual API calls. When reading the API doc, start with the Client interface: it contains all components of the API. The individual API's, their documentation and examples are located in subinterfaces, such as DiskClient. There are several ways to create a client instance. The most basic way is to use the New() function as follows: The mock client simulates the oVirt engine behavior in-memory without needing an actual running engine. This is a good way to provide a testing facility. It can be created using the NewMock method: That's it! However, to make it really useful, you will need the test helper which can set up test fixtures. The test helper can work in two ways: Either it sets up test fixtures in the mock client, or it sets up a live connection and identifies a usable storage domain, cluster, etc. for testing purposes. The ovirtclient.NewMockTestHelper() function can be used to create a test helper with a mock client in the backend: The easiest way to set up the test helper for a live connection is by using environment variables. To do that, you can use the ovirtclient.NewLiveTestHelperFromEnv() function: This function will inspect environment variables to determine if a connection to a live oVirt engine can be established. The following environment variables are supported: URL of the oVirt engine API. Mandatory. The username for the oVirt engine. Mandatory. The password for the oVirt engine. Mandatory. A file containing the CA certificate in PEM format. Provide the CA certificate in PEM format directly. Disable certificate verification if set. Not recommended. The cluster to use for testing. Will be automatically chosen if not provided. ID of the blank template. Will be automatically chosen if not provided. Storage domain to use for testing. Will be automatically chosen if not provided. VNIC profile to use for testing. Will be automatically chosen if not provided. You can also create the test helper manually: This library provides extensive logging. Each API interaction is logged on the debug level, and other messages are added on other levels. In order to provide logging this library uses the go-ovirt-client-log (https://github.com/oVirt/go-ovirt-client-log) interface definition. As long as your logger implements this interface, you will be able to receive log messages. The logging library also provides a few built-in loggers. For example, you can log via the default Go log interface: Or, you can also log in tests: You can also disable logging: Finally, we also provide an adapter library for klog here: https://github.com/oVirt/go-ovirt-client-log-klog Modern-day oVirt engines run secured with TLS. This means that the client needs a way to verify the certificate the server is presenting. This is controlled by the tls parameter of the New() function. You can implement your own source by implementing the TLSProvider interface, but the package also includes a ready-to-use provider. Create the provider using the TLS() function: This provider has several functions. The easiest to set up is using the system trust root for certificates. However, this won't work own Windows: Now you need to add your oVirt engine certificate to your system trust root. If you don't want to, or can't add the certificate to the system trust root, you can also directly provide it to the client. Finally, you can also disable certificate verification. Do we need to say that this is a very, very bad idea? The configured tls variable can then be passed to the New() function to create an oVirt client. This library attempts to retry API calls that can be retried if possible. Each function has a sensible retry policy. However, you may want to customize the retries by passing one or more retry flags. The following retry flags are supported: This strategy will stop retries when the context parameter is canceled. This strategy adds a wait time after each time, which is increased by the given factor on each try. The default is a backoff with a factor of 2. This strategy will cancel retries if the error in question is a permanent error. This is enabled by default. This strategy will abort retries if a maximum number of tries is reached. On complex calls the retries are counted per underlying API call. This strategy will abort retries if a certain time has been elapsed for the higher level call. This strategy will abort retries if a certain underlying API call takes longer than the specified duration.

gocovmerge takes the results from multiple `go test -coverprofile` runs and merges them into one profile

Package profile provides simple profiling for Go applications.

Package emergent is the overall repository for the emergent neural network simulation software, written in Go (golang) with Python wrappers. This top-level of the repository has no functional code -- everything is organized into the following sub-repositories: * emer: defines the primary structural interfaces for emergent, at the level of Network, Layer, and Prjn (projection). These contain no algorithm-specific code and are only about the overall structure of a network, sufficient to support general purpose tools such as the 3D NetView. It also houses widely-used support classes used in algorithm-specific code, including things like MinMax and AvgMax, and also the parameter-styling infrastructure (emer.Params, emer.ParamStyle, emer.ParamSet and emer.ParamSets). * erand has misc random-number generation support functionality, including erand.RndParams for parameterizing the type of random noise to add to a model, and easier support for making permuted random lists, etc. * netview provides the NetView interactive 3D network viewer, implemented in the GoGi 3D framework. * prjn is a separate package for defining patterns of connectivity between layers (i.e., the ProjectionSpecs from C++ emergent). This is done using a fully independent structure that *only* knows about the shapes of the two layers, and it returns a fully general bitmap representation of the pattern of connectivity between them. The leabra.Prjn code then uses these patterns to do all the nitty-gritty of connecting up neurons. This makes the projection code *much* simpler compared to the ProjectionSpec in C++ emergent, which was involved in both creating the pattern and also all the complexity of setting up the actual connections themselves. This should be the *last* time any of those projection patterns need to be written (having re-written this code too many times in the C++ version as the details of memory allocations changed). * patgen supports various pattern-generation algorithms, as implemented in taDataGen in C++ emergent (e.g., PermutedBinary and FlipBits). * timer is a simple interval timing struct, used for benchmarking / profiling etc. * python contains a template Makefile that uses [GoPy](https://github.com/goki/gopy) to generate python bindings to the entire emergent system. See the leabra package version to actually run an example.

Package vdir implements RFC 2425 directory encoding with support for vCard and iCalendar profiles. The directory blocks can be mapped to an arbitrary Go Value which is described in the Marshal and Unmarshal functions. In addition, the package provides conversions to/from a generalized Object representation which allows for detailed access and easier modification.

Package sdk is the official AWS SDK for the Go programming language. The AWS SDK for Go provides APIs and utilities that developers can use to build Go applications that use AWS services, such as Amazon Elastic Compute Cloud (Amazon EC2) and Amazon Simple Storage Service (Amazon S3). The SDK removes the complexity of coding directly against a web service interface. It hides a lot of the lower-level plumbing, such as authentication, request retries, and error handling. The SDK also includes helpful utilities on top of the AWS APIs that add additional capabilities and functionality. For example, the Amazon S3 Download and Upload Manager will automatically split up large objects into multiple parts and transfer them concurrently. See the s3manager package documentation for more information. https://docs.aws.amazon.com/sdk-for-go/api/service/s3/s3manager/ Checkout the Getting Started Guide and API Reference Docs detailed the SDK's components and details on each AWS client the SDK supports. The Getting Started Guide provides examples and detailed description of how to get setup with the SDK. https://docs.aws.amazon.com/sdk-for-go/v1/developer-guide/welcome.html The API Reference Docs include a detailed breakdown of the SDK's components such as utilities and AWS clients. Use this as a reference of the Go types included with the SDK, such as AWS clients, API operations, and API parameters. https://docs.aws.amazon.com/sdk-for-go/api/ The SDK is composed of two main components, SDK core, and service clients. The SDK core packages are all available under the aws package at the root of the SDK. Each client for a supported AWS service is available within its own package under the service folder at the root of the SDK. aws - SDK core, provides common shared types such as Config, Logger, and utilities to make working with API parameters easier. awserr - Provides the error interface that the SDK will use for all errors that occur in the SDK's processing. This includes service API response errors as well. The Error type is made up of a code and message. Cast the SDK's returned error type to awserr.Error and call the Code method to compare returned error to specific error codes. See the package's documentation for additional values that can be extracted such as RequestId. credentials - Provides the types and built in credentials providers the SDK will use to retrieve AWS credentials to make API requests with. Nested under this folder are also additional credentials providers such as stscreds for assuming IAM roles, and ec2rolecreds for EC2 Instance roles. endpoints - Provides the AWS Regions and Endpoints metadata for the SDK. Use this to lookup AWS service endpoint information such as which services are in a region, and what regions a service is in. Constants are also provided for all region identifiers, e.g UsWest2RegionID for "us-west-2". session - Provides initial default configuration, and load configuration from external sources such as environment and shared credentials file. request - Provides the API request sending, and retry logic for the SDK. This package also includes utilities for defining your own request retryer, and configuring how the SDK processes the request. service - Clients for AWS services. All services supported by the SDK are available under this folder. The SDK includes the Go types and utilities you can use to make requests to AWS service APIs. Within the service folder at the root of the SDK you'll find a package for each AWS service the SDK supports. All service clients follows a common pattern of creation and usage. When creating a client for an AWS service you'll first need to have a Session value constructed. The Session provides shared configuration that can be shared between your service clients. When service clients are created you can pass in additional configuration via the nifcloud.Config type to override configuration provided by in the Session to create service client instances with custom configuration. Once the service's client is created you can use it to make API requests the AWS service. These clients are safe to use concurrently. In the AWS SDK for Go, you can configure settings for service clients, such as the log level and maximum number of retries. Most settings are optional; however, for each service client, you must specify a region and your credentials. The SDK uses these values to send requests to the correct AWS region and sign requests with the correct credentials. You can specify these values as part of a session or as environment variables. See the SDK's configuration guide for more information. https://docs.aws.amazon.com/sdk-for-go/v1/developer-guide/configuring-sdk.html See the session package documentation for more information on how to use Session with the SDK. https://docs.aws.amazon.com/sdk-for-go/api/nifcloud/session/ See the Config type in the aws package for more information on configuration options. https://docs.aws.amazon.com/sdk-for-go/api/nifcloud/#Config When using the SDK you'll generally need your AWS credentials to authenticate with AWS services. The SDK supports multiple methods of supporting these credentials. By default the SDK will source credentials automatically from its default credential chain. See the session package for more information on this chain, and how to configure it. The common items in the credential chain are the following: Environment Credentials - Set of environment variables that are useful when sub processes are created for specific roles. Shared Credentials file (~/.nifcloud/credentials) - This file stores your credentials based on a profile name and is useful for local development. EC2 Instance Role Credentials - Use EC2 Instance Role to assign credentials to application running on an EC2 instance. This removes the need to manage credential files in production. Credentials can be configured in code as well by setting the Config's Credentials value to a custom provider or using one of the providers included with the SDK to bypass the default credential chain and use a custom one. This is helpful when you want to instruct the SDK to only use a specific set of credentials or providers. This example creates a credential provider for assuming an IAM role, "myRoleARN" and configures the S3 service client to use that role for API requests. See the credentials package documentation for more information on credential providers included with the SDK, and how to customize the SDK's usage of credentials. https://docs.aws.amazon.com/sdk-for-go/api/nifcloud/credentials The SDK has support for the shared configuration file (~/.nifcloud/config). This support can be enabled by setting the environment variable, "AWS_SDK_LOAD_CONFIG=1", or enabling the feature in code when creating a Session via the Option's SharedConfigState parameter. In addition to the credentials you'll need to specify the region the SDK will use to make AWS API requests to. In the SDK you can specify the region either with an environment variable, or directly in code when a Session or service client is created. The last value specified in code wins if the region is specified multiple ways. To set the region via the environment variable set the "AWS_REGION" to the region you want to the SDK to use. Using this method to set the region will allow you to run your application in multiple regions without needing additional code in the application to select the region. The endpoints package includes constants for all regions the SDK knows. The values are all suffixed with RegionID. These values are helpful, because they reduce the need to type the region string manually. To set the region on a Session use the aws package's Config struct parameter Region to the AWS region you want the service clients created from the session to use. This is helpful when you want to create multiple service clients, and all of the clients make API requests to the same region. See the endpoints package for the AWS Regions and Endpoints metadata. https://docs.aws.amazon.com/sdk-for-go/api/nifcloud/endpoints/ In addition to setting the region when creating a Session you can also set the region on a per service client bases. This overrides the region of a Session. This is helpful when you want to create service clients in specific regions different from the Session's region. See the Config type in the aws package for more information and additional options such as setting the Endpoint, and other service client configuration options. https://docs.aws.amazon.com/sdk-for-go/api/nifcloud/#Config Once the client is created you can make an API request to the service. Each API method takes a input parameter, and returns the service response and an error. The SDK provides methods for making the API call in multiple ways. In this list we'll use the S3 ListObjects API as an example for the different ways of making API requests. ListObjects - Base API operation that will make the API request to the service. ListObjectsRequest - API methods suffixed with Request will construct the API request, but not send it. This is also helpful when you want to get a presigned URL for a request, and share the presigned URL instead of your application making the request directly. ListObjectsPages - Same as the base API operation, but uses a callback to automatically handle pagination of the API's response. ListObjectsWithContext - Same as base API operation, but adds support for the Context pattern. This is helpful for controlling the canceling of in flight requests. See the Go standard library context package for more information. This method also takes request package's Option functional options as the variadic argument for modifying how the request will be made, or extracting information from the raw HTTP response. ListObjectsPagesWithContext - same as ListObjectsPages, but adds support for the Context pattern. Similar to ListObjectsWithContext this method also takes the request package's Option function option types as the variadic argument. In addition to the API operations the SDK also includes several higher level methods that abstract checking for and waiting for an AWS resource to be in a desired state. In this list we'll use WaitUntilBucketExists to demonstrate the different forms of waiters. WaitUntilBucketExists. - Method to make API request to query an AWS service for a resource's state. Will return successfully when that state is accomplished. WaitUntilBucketExistsWithContext - Same as WaitUntilBucketExists, but adds support for the Context pattern. In addition these methods take request package's WaiterOptions to configure the waiter, and how underlying request will be made by the SDK. The API method will document which error codes the service might return for the operation. These errors will also be available as const strings prefixed with "ErrCode" in the service client's package. If there are no errors listed in the API's SDK documentation you'll need to consult the AWS service's API documentation for the errors that could be returned. Pagination helper methods are suffixed with "Pages", and provide the functionality needed to round trip API page requests. Pagination methods take a callback function that will be called for each page of the API's response. Waiter helper methods provide the functionality to wait for an AWS resource state. These methods abstract the logic needed to to check the state of an AWS resource, and wait until that resource is in a desired state. The waiter will block until the resource is in the state that is desired, an error occurs, or the waiter times out. If a resource times out the error code returned will be request.WaiterResourceNotReadyErrorCode. This example shows a complete working Go file which will upload a file to S3 and use the Context pattern to implement timeout logic that will cancel the request if it takes too long. This example highlights how to use sessions, create a service client, make a request, handle the error, and process the response.

Use hypothesis.NewClient to create a hypothesis.Client that searches for annotations. NewClient's token param is optional. If it's set to your Hypothesis token, you'll search both public and private annotations. If it's the empty string, you'll only search public annotations. NewClient's hypothesis.SearchParams is likewise optional. If empty, your search will be unfiltered. NewClient's maxSearchResults param determines how many annotations to fetch. If 0, the limit defaults to 400. To search for the most recent 10 public annotations: To search for the most recent 10 public or private annotations, if your token is in an env var called H_TOKEN: To search for the most recent 10 annotations in a private group whose id in an env var called H_GROUP: To search for at most 10 public or private annotations from user 'judell', with the tag 'social media': The Hypothesis search API returns at most 200 annotations. hypothesis.Search encapsulates that API call, and returns an array of hypothesis.Row. Each Row represents one annotation. To fetch more than 200 annotations, use hypothesis.SearchAll. This test should find 2000 recent public or private annotations. For more search examples, see the Steampipe Hypothesis plugin. If you authenticate with your token you can call hypothesis.Client.GetProfile to list your private groups. Here, 'profile' is a hypothesis.Profile which includes hypothesis.Profile.Groups, an array of structs that include the names and ids of your private groups. An annotation may include an array of hypothesis.Selector. These structures define how the annotation "anchors" to the segment it refers to. See anchoring.

Package matrixprofile computes the matrix profile and matrix profile index of a time series

Package ovirtclient provides a human-friendly Go client for the oVirt Engine. It provides an abstraction layer for the oVirt API, as well as a mocking facility for testing purposes. This documentation contains two parts. This introduction explains setting up the client with the credentials. The API doc contains the individual API calls. When reading the API doc, start with the Client interface: it contains all components of the API. The individual API's, their documentation and examples are located in subinterfaces, such as DiskClient. There are several ways to create a client instance. The most basic way is to use the New() function as follows: The mock client simulates the oVirt engine behavior in-memory without needing an actual running engine. This is a good way to provide a testing facility. It can be created using the NewMock method: That's it! However, to make it really useful, you will need the test helper which can set up test fixtures. The test helper can work in two ways: Either it sets up test fixtures in the mock client, or it sets up a live connection and identifies a usable storage domain, cluster, etc. for testing purposes. The ovirtclient.NewMockTestHelper() function can be used to create a test helper with a mock client in the backend: The easiest way to set up the test helper for a live connection is by using environment variables. To do that, you can use the ovirtclient.NewLiveTestHelperFromEnv() function: This function will inspect environment variables to determine if a connection to a live oVirt engine can be established. The following environment variables are supported: URL of the oVirt engine API. Mandatory. The username for the oVirt engine. Mandatory. The password for the oVirt engine. Mandatory. A file containing the CA certificate in PEM format. Provide the CA certificate in PEM format directly. Disable certificate verification if set. Not recommended. The cluster to use for testing. Will be automatically chosen if not provided. ID of the blank template. Will be automatically chosen if not provided. Storage domain to use for testing. Will be automatically chosen if not provided. VNIC profile to use for testing. Will be automatically chosen if not provided. You can also create the test helper manually: This library provides extensive logging. Each API interaction is logged on the debug level, and other messages are added on other levels. In order to provide logging this library uses the go-ovirt-client-log (https://github.com/oVirt/go-ovirt-client-log) interface definition. As long as your logger implements this interface, you will be able to receive log messages. The logging library also provides a few built-in loggers. For example, you can log via the default Go log interface: Or, you can also log in tests: You can also disable logging: Finally, we also provide an adapter library for klog here: https://github.com/oVirt/go-ovirt-client-log-klog Modern-day oVirt engines run secured with TLS. This means that the client needs a way to verify the certificate the server is presenting. This is controlled by the tls parameter of the New() function. You can implement your own source by implementing the TLSProvider interface, but the package also includes a ready-to-use provider. Create the provider using the TLS() function: This provider has several functions. The easiest to set up is using the system trust root for certificates. However, this won't work own Windows: Now you need to add your oVirt engine certificate to your system trust root. If you don't want to, or can't add the certificate to the system trust root, you can also directly provide it to the client. Finally, you can also disable certificate verification. Do we need to say that this is a very, very bad idea? The configured tls variable can then be passed to the New() function to create an oVirt client. This library attempts to retry API calls that can be retried if possible. Each function has a sensible retry policy. However, you may want to customize the retries by passing one or more retry flags. The following retry flags are supported: This strategy will stop retries when the context parameter is canceled. This strategy adds a wait time after each time, which is increased by the given factor on each try. The default is a backoff with a factor of 2. This strategy will cancel retries if the error in question is a permanent error. This is enabled by default. This strategy will abort retries if a maximum number of tries is reached. On complex calls the retries are counted per underlying API call. This strategy will abort retries if a certain time has been elapsed for the higher level call. This strategy will abort retries if a certain underlying API call takes longer than the specified duration.

Package getlang provides fast natural language detection for various languages getlang compares input text to a characteristic profile of each supported language and returns the language that best matches the input text

Package gochrome aims to be a complete Chrome DevTools Protocol Viewer implementation. Versioned packages are available. Curently the only version is `tot` or Tip-of-Tree. Stable versions will be made available in the future. This is beta software and hasn't been well exercised in real-world applications. See https://chromedevtools.github.io/devtools-protocol/ The Chrome DevTools Protocol allows for tools to instrument, inspect, debug and profile Chromium, Chrome and other Blink-based browsers. Many existing projects currently use the protocol. The Chrome DevTools uses this protocol and the team maintains its API. Instrumentation is divided into a number of domains (DOM, Debugger, Network etc.). Each domain defines a number of commands it supports and events it generates. Both commands and events are serialized JSON objects of a fixed structure. You can either debug over the wire using the raw messages as they are described in the corresponding domain documentation, or use extension JavaScript API. The latest (tip-of-tree) protocol (tot) It changes frequently and can break at any time. However it captures the full capabilities of the Protocol, whereas the stable release is a subset. There is no backwards compatibility support guaranteed for the capabilities it introduces. Resources Basics: Using DevTools as protocol client The Developer Tools front-end can attach to a remotely running Chrome instance for debugging. For this scenario to work, you should start your host Chrome instance with the remote-debugging-port command line switch: Then you can start a separate client Chrome instance, using a distinct user profile: Now you can navigate to the given port from your client and attach to any of the discovered tabs for debugging: http://localhost:9222 You will find the Developer Tools interface identical to the embedded one and here is why: In this scenario, you can substitute Developer Tools front-end with your own implementation. Instead of navigating to the HTML page at http://localhost:9222, your application can discover available pages by requesting: http://localhost:9222/json and getting a JSON object with information about inspectable pages along with the WebSocket addresses that you could use in order to start instrumenting them. Remote debugging is especially useful when debugging remote instances of the browser or attaching to the embedded devices. Blink port owners are responsible for exposing debugging connections to the external users. This is especially handy to understand how the DevTools frontend makes use of the protocol. First, run Chrome with the debugging port open: Then, select the Chromium Projects item in the Inspectable Pages list. Now that DevTools is up and fullscreen, open DevTools to inspect it. Cmd-R in the new inspector to make the first restart. Now head to Network Panel, filter by Websocket, select the connection and click the Frames tab. Now you can easily see the frames of WebSocket activity as you use the first instance of the DevTools. To allow chrome extensions to interact with the protocol, we introduced chrome.debugger extension API that exposes this JSON message transport interface. As a result, you can not only attach to the remotely running Chrome instance, but also instrument it from its own extension. Chrome Debugger Extension API provides a higher level API where command domain, name and body are provided explicitly in the `sendCommand` call. This API hides request ids and handles binding of the request with its response, hence allowing `sendCommand` to report result in the callback function call. One can also use this API in combination with the other Extension APIs. If you are developing a Web-based IDE, you should implement an extension that exposes debugging capabilities to your page and your IDE will be able to open pages with the target application, set breakpoints there, evaluate expressions in console, live edit JavaScript and CSS, display live DOM, network interaction and any other aspect that Developer Tools is instrumenting today. Opening embedded Developer Tools will terminate the remote connection and thus detach the extension. https://chromedevtools.github.io/devtools-protocol/#simultaneous The canonical protocol definitions live in the Chromium source tree: (browser_protocol.json and js_protocol.json). They are maintained manually by the DevTools engineering team. These files are mirrored (hourly) on GitHub in the devtools-protocol repo. The declarative protocol definitions are used across tools. Within Chromium, a binding layer is created for the Chrome DevTools to interact with, and separately the protocol is used for Chrome Headless’s C++ interface. What’s the protocol_externs file It’s created via generate_protocol_externs.py and useful for tools using closure compiler. The TypeScript story is here. Not yet. See bugger-daemon’s third-party docs. See also the endpoints implementation in Chromium. /json/protocol was added in Chrome 60. The endpoint is exposed as webSocketDebuggerUrl in /json/version. Note the browser in the URL, rather than page. If Chrome was launched with --remote-debugging-port=0 and chose an open port, the browser endpoint is written to both stderr and the DevToolsActivePort file in browser profile folder. Yes, as of Chrome 63! See Multi-client remote debugging support. Upon disconnnection, the outgoing client will receive a detached event. For example: View the enum of possible reasons. (For reference: the original patch). After disconnection, some apps have chosen to pause their state and offer a reconnect button.

Package gatt provides a Bluetooth Low Energy gatt implementation. Gatt (Generic Attribute Profile) is the protocol used to write BLE peripherals (servers) and centrals (clients). This package is a work in progress. The API will change. As a peripheral, you can create services, characteristics, and descriptors, advertise, accept connections, and handle requests. As a central, you can scan, connect, discover services, and make requests. gatt supports both Linux and OS X. On Linux: To gain complete and exclusive control of the HCI device, gatt uses HCI_CHANNEL_USER (introduced in Linux v3.14) instead of HCI_CHANNEL_RAW. Those who must use an older kernel may patch in these relevant commits from Marcel Holtmann: Note that because gatt uses HCI_CHANNEL_USER, once gatt has opened the device no other program may access it. Before starting a gatt program, make sure that your BLE device is down: If you have BlueZ 5.14+ (or aren't sure), stop the built-in bluetooth server, which interferes with gatt, e.g.: Because gatt programs administer network devices, they must either be run as root, or be granted appropriate capabilities: USAGE See the server.go, discoverer.go, and explorer.go in the examples/ directory for writing server or client programs that run on Linux and OS X. Users, especially on Linux platforms, seeking finer-grained control over the devices can see the examples/server_lnx.go for the usage of Option, which are platform specific. See the rest of the docs for other options and finer-grained control. Note that some BLE central devices, particularly iOS, may aggressively cache results from previous connections. If you change your services or characteristics, you may need to reboot the other device to pick up the changes. This is a common source of confusion and apparent bugs. For an OS X central, see http://stackoverflow.com/questions/20553957. gatt started life as a port of bleno, to which it is indebted: https://github.com/sandeepmistry/bleno. If you are having problems with gatt, particularly around installation, issues filed with bleno might also be helpful references. To try out your GATT server, it is useful to experiment with a generic BLE client. LightBlue is a good choice. It is available free for both iOS and OS X.

Package profile provides a simple way to manage multiple runtime/pprof profiling of your Go application

Package pprof serves via its HTTP server runtime profiling data in the format expected by the pprof visualization tool. For more information about pprof, see http://code.google.com/p/google-perftools/. The package is typically only imported for the side effect of registering its HTTP handlers. The handled paths all begin with /debug/pprof/. To use pprof, link this package into your program: If your application is not already running an http server, you need to start one. Add "net/http" and "log" to your imports and the following code to your main function: Then use the pprof tool to look at the heap profile: Or to look at a 30-second CPU profile: Or to look at the goroutine blocking profile: To view all available profiles, open http://localhost:6060/debug/pprof/ in your browser. For a study of the facility in action, visit