binary-parser-encoder-bump
Advanced tools
This is a fork of Tom Alon's updated fork of Eric Blanchard's binary-parser-encoder fork adding encoding capabilities to the original binary-parser by Keichi Takahashi. Until the the encoding feature is merged in baseline of original project, this fork / branch is published under the name: binary-parser-encoder-bump on NPM.
Binary-parser is a parser/encoder builder for JavaScript that enables you to write efficient binary parsers/encoders in a simple and declarative manner.
It supports all common data types required to analyze a structured binary data. Binary-parser dynamically generates and compiles the parser and encoder code on-the-fly, which runs as fast as a hand-written parser/encoder (which takes much more time and effort to write). Supported data types are:
Binary-parser was inspired by BinData and binary.
Parser object with new Parser() or Parser.start().Parser.prototype.parse with a Buffer/Uint8Array object passed as
its only argument.Parser.prototype.encode with an object passed as argument.Buffer object.// Module import
const Parser = require("binary-parser").Parser;
// Alternative way to import the module
// import { Parser } from "binary-parser";
// Build an IP packet header Parser
const ipHeader = new Parser()
.endianness("big")
.bit4("version")
.bit4("headerLength")
.uint8("tos")
.uint16("packetLength")
.uint16("id")
.bit3("offset")
.bit13("fragOffset")
.uint8("ttl")
.uint8("protocol")
.uint16("checksum")
.array("src", {
type: "uint8",
length: 4
})
.array("dst", {
type: "uint8",
length: 4
});
// Prepare buffer to parse.
const buf = Buffer.from("450002c5939900002c06ef98adc24f6c850186d1", "hex");
// Parse buffer and show result
console.log(ipHeader.parse(buf));
var anIpHeader = {
version: 4,
headerLength: 5,
tos: 0,
packetLength: 709,
id: 37785,
offset: 0,
fragOffset: 0,
ttl: 44,
protocol: 6,
checksum: 61336,
src: [ 173, 194, 79, 108 ],
dst: [ 133, 1, 134, 209 ] };
// Encode an IP header object and show result as hex string
console.log(ipHeader.encode(anIpHeader).toString("hex"));
You can install binary-parser via npm:
npm install binary-parser
The npm package provides entry points for both CommonJS and ES modules.
Create an empty parser object that parses nothing.
options is an optional object to pass options to this declarative
parser.
smartBufferSize The chunk size of the encoding (smart)buffer (when encoding is used) (default is 256 bytes).Parse a Buffer/Uint8Array object buffer with this parser and return the
resulting object. When parse(buffer) is called for the first time, the
associated parser code is compiled on-the-fly and internally cached.
Encode an Object object obj with this parser and return the resulting
Buffer. When encode(obj) is called for the first time, encoder code is
compiled on-the-fly and internally cached.
Set the constructor function that should be called to create the object
returned from the parse method.
Parse bytes as an integer and store it in a variable named name. name
should consist only of alphanumeric characters and start with an alphabet.
Number of bits can be chosen from 8, 16, 32 and 64. Byte-ordering can be either
le for little endian or be for big endian. With no prefix, it parses as a
signed number, with u prefix as an unsigned number. The runtime type
returned by the 8, 16, 32 bit methods is number while the type
returned by the 64 bit is bigint.
Note: [u]int64{be,le} methods only work if your runtime is node v12.0.0 or greater. Lower versions will throw a runtime error.
const parser = new Parser()
// Signed 32-bit integer (little endian)
.int32le("a")
// Unsigned 8-bit integer
.uint8("b")
// Signed 16-bit integer (big endian)
.int16be("c")
// signed 64-bit integer (big endian)
.int64be("d")
Parse bytes as a bit field and store it in variable name. There are 32
methods from bit1 to bit32 each corresponding to 1-bit-length to
32-bits-length bit field.
Parse bytes as a floating-point value and stores it to a variable named
name.
const parser = new Parser()
// 32-bit floating value (big endian)
.floatbe("a")
// 64-bit floating value (little endian)
.doublele("b");
Parse bytes as a string. name should consist only of alpha numeric
characters and start with an alphabet. options is an object which can have
the following keys:
encoding - (Optional, defaults to utf8) Specify which encoding to use.
Supported encodings include "hex" and all encodings supported by
TextDecoder.length - (Optional) Length of the string. Can be a number, string or a
function. Use number for statically sized arrays, string to reference
another variable and function to do some calculation.
Note: When encoding the string is padded with a padd charecter to fit the length requirement.zeroTerminated - (Optional, defaults to false) If true, then this parser
reads until it reaches zero (or the specified length). When encoding, a null character is inserted at end of
the string (if the optional length allows it).greedy - (Optional, defaults to false) If true, then this parser reads
until it reaches the end of the buffer. Will consume zero-bytes. (Note: has
no effect on encoding function)stripNull - (Optional, must be used with length) If true, then strip
null characters from end of the string. (Note: When encoding, this will also set the default padd character
to null instead of space)trim - (Optional, default to false) If true, then trim() (remove leading and trailing spaces)
the parsed string.padding - (Optional, Only used for encoding, default to right) If left then the string
will be right aligned (padding left with padd char or space) depending of the length optionpadd - (Optional, Only used for encoding with length specified) A string from which first character (1 Byte)
is used as a padding char if necessary (provided string length is less than length option). Note: Only 'ascii'
or utf8 < 0x80 are alowed. Note: The default padd character is space (or null when stripNull is used).Parse bytes as a buffer. Its type will be the same as the input to
parse(buffer). name should consist only of alpha numeric characters and
start with an alphabet. options is an object which can have the following
keys:
clone - (Optional, defaults to false) By default,
buffer(name [,options]) returns a new buffer which references the same
memory as the parser input, but offset and cropped by a certain range. If
this option is true, input buffer will be cloned and a new buffer
referencing a new memory region is returned.length - (either length or readUntil is required) Length of the
buffer. Can be a number, string or a function. Use number for statically
sized buffers, string to reference another variable and function to do some
calculation.readUntil - (either length or readUntil is required) If "eof", then
this parser will read till it reaches the end of the Buffer/Uint8Array
object. (Note: has no effect on encoding.)
If it is a function, this parser will read the buffer until the
function returns true.Parse bytes as an array. options is an object which can have the following
keys:
type - (Required) Type of the array element. Can be a string or a user
defined Parser object. If it's a string, you have to choose from [u]int{8,
16, 32}{le, be}.length - (either length, lengthInBytes, or readUntil is required)
Length of the array. Can be a number, string or a function. Use number for
statically sized arrays.lengthInBytes - (either length, lengthInBytes, or readUntil is
required) Length of the array expressed in bytes. Can be a number, string or
a function. Use number for statically sized arrays.readUntil - (either length, lengthInBytes, or readUntil is required)
If "eof", then this parser reads until the end of the Buffer/Uint8Array
object. If function it reads until the function returns true.
Note: When encoding,
the buffer second parameter of readUntil function is the buffer already encoded
before this array. So no read-ahead is possible.encodeUntil - a function (item, object), only used when encoding, that replaces
the readUntil function when present and allow limit the number of encoded items
by returning true based on item values or other object properies.const parser = new Parser()
// Statically sized array
.array("data", {
type: "int32",
length: 8
})
// Dynamically sized array (references another variable)
.uint8("dataLength")
.array("data2", {
type: "int32",
length: "dataLength"
})
// Dynamically sized array (with some calculation)
.array("data3", {
type: "int32",
length: function() {
return this.dataLength - 1;
} // other fields are available through `this`
})
// Statically sized array
.array("data4", {
type: "int32",
lengthInBytes: 16
})
// Dynamically sized array (references another variable)
.uint8("dataLengthInBytes")
.array("data5", {
type: "int32",
lengthInBytes: "dataLengthInBytes"
})
// Dynamically sized array (with some calculation)
.array("data6", {
type: "int32",
lengthInBytes: function() {
return this.dataLengthInBytes - 4;
} // other fields are available through `this`
})
// Dynamically sized array (with stop-check on parsed item)
.array("data7", {
type: "int32",
readUntil: function(item, buffer) {
return item === 42;
} // stop when specific item is parsed. buffer can be used to perform a read-ahead.
})
// Use user defined parser object
.array("data8", {
type: userDefinedParser,
length: "dataLength"
});
Choose one parser from multiple parsers according to a field value and store
its parsed result to key name. If name is null or omitted, the result of
the chosen parser is directly embedded into the current object. options is
an object which can have the following keys:
tag - (Required) The value used to determine which parser to use from the
choices. Can be a string pointing to another field or a function.choices - (Required) An object which key is an integer and value is the
parser which is executed when tag equals the key value.defaultChoice - (Optional) In case if the tag value doesn't match any of
choices, this parser is used.const parser1 = ...;
const parser2 = ...;
const parser3 = ...;
const parser = new Parser().uint8("tagValue").choice("data", {
tag: "tagValue",
choices: {
1: parser1, // if tagValue == 1, execute parser1
4: parser2, // if tagValue == 4, execute parser2
5: parser3 // if tagValue == 5, execute parser3
}
});
Combining choice with array is an idiom to parse
TLV-based binary formats.
Execute an inner parser and store its result to key name. If name is null
or omitted, the result of the inner parser is directly embedded into the
current object. options is an object which can have the following keys:
type - (Required) A Parser object.Jump to offset, execute parser for type and rewind to previous offset.
Useful for parsing binary formats such as ELF where the offset of a field is
pointed by another field.
type - (Required) Can be a string [u]int{8, 16, 32, 64}{le, be}
or a user defined Parser object.offset - (Required) Indicates absolute offset from the beginning of the
input buffer. Can be a number, string or a function.Save the current buffer offset as key name. This function is only useful
when called after another function which would advance the internal buffer
offset.
const parser = new Parser()
// this call advances the buffer offset by
// a variable (i.e. unknown to us) number of bytes
.string("name", {
zeroTerminated: true
})
// this variable points to an absolute position
// in the buffer
.uint32("seekOffset")
// now, save the "current" offset in the stream
// as the variable "currentOffset"
.saveOffset("currentOffset")
// finally, use the saved offset to figure out
// how many bytes we need to skip
.seek(function() {
return this.seekOffset - this.currentOffset;
})
... // the parser would continue here
Move the buffer offset for relOffset bytes from the current position. Use a
negative relOffset value to rewind the offset. This method was previously
named skip(length). (Note: when encoding, the skipped bytes will be filled with zeros)
Define what endianness to use in this parser. endianness can be either
"little" or "big". The default endianness of Parser is set to big-endian.
const parser = new Parser()
.endianness("little")
// You can specify endianness explicitly
.uint16be("a")
.uint32le("a")
// Or you can omit endianness (in this case, little-endian is used)
.uint16("b")
.int32("c");
Set specific options for encoding.
Current supported opts object may contain:
var parser = new Parser()
.endianess("little")
.encoderSetOptions({bitEndianess: true}) // Use BITs endianess for bits fields
.bit4("a")
.bit4("b")
.uint16("c");
Set an alias to this parser, so that it can be referred to by name in methods
like .array, .nest and .choice, without the requirement to have an
instance of this parser.
Especially, the parser may reference itself:
const stop = new Parser();
const parser = new Parser()
.namely("self") // use 'self' to refer to the parser itself
.uint8("type")
.choice("data", {
tag: "type",
choices: {
0: stop,
1: "self",
2: Parser.start()
.nest("left", { type: "self" })
.nest("right", { type: "self" }),
3: Parser.start()
.nest("one", { type: "self" })
.nest("two", { type: "self" })
.nest("three", { type: "self" })
}
});
// 2
// / \
// 3 1
// / | \ \
// 1 0 2 0
// / / \
// 0 1 0
// /
// 0
const buffer = Buffer.from([
2,
/* left -> */ 3,
/* one -> */ 1, /* -> */ 0,
/* two -> */ 0,
/* three -> */ 2,
/* left -> */ 1, /* -> */ 0,
/* right -> */ 0,
/* right -> */ 1, /* -> */ 0
]);
parser.parse(buffer);
For most of the cases there is almost no difference to the instance-way of referencing, but this method provides the way to parse recursive trees, where each node could reference the node of the same type from the inside.
Also, when you reference a parser using its instance twice, the generated code will contain two similar parts of the code included, while with the named approach, it will include a function with a name, and will just call this function for every case of usage.
Note: This style could lead to circular references and infinite recursion, to avoid this, ensure that every possible path has its end. Also, this recursion is not tail-optimized, so could lead to memory leaks when it goes too deep.
An example of referencing other parsers:
// the line below registers the name "self", so we will be able to use it in
// `twoCells` as a reference
const parser = Parser.start().namely("self");
const stop = Parser.start().namely("stop");
const twoCells = Parser.start()
.namely("twoCells")
.nest("left", { type: "self" })
.nest("right", { type: "stop" });
parser.uint8("type").choice("data", {
tag: "type",
choices: {
0: "stop",
1: "self",
2: "twoCells"
}
});
const buffer = Buffer.from([2, /* left */ 1, 1, 0, /* right */ 0]);
parser.parse(buffer);
Read data, then wrap it by transforming it by a function for further parsing. It works similarly to a buffer where it reads a block of data. But instead of returning the buffer it will pass the buffer on to a parser for further processing.
The result will be stored in the key name. If name is an empty string or
null, or if it is omitted, the parsed result is directly embedded into the
current object.
wrapper - (Required) A function taking a buffer and returning a buffer
((x: Buffer | Uint8Array ) => Buffer | Uint8Array) transforming the buffer
into a buffer expected by type.type - (Required) A Parser object to parse the buffer returned by wrapper.length - (either length or readUntil is required) Length of the
buffer. Can be a number, string or a function. Use a number for statically
sized buffers, a string to reference another variable and a function to do some
calculation.readUntil - (either length or readUntil is required) If "eof", then
this parser will read till it reaches the end of the Buffer/Uint8Array
object. If it is a function, this parser will read the buffer until the
function returns true.const zlib = require("zlib");
// A parser to run on the data returned by the wrapper
const textParser = Parser.start()
.string("text", {
zeroTerminated: true,
});
const mainParser = Parser.start()
// Read length of the data to wrap
.uint32le("length")
// Read wrapped data
.wrapped("wrappedData", {
// Indicate how much data to read, like buffer()
length: "length",
// Define function to pre-process the data buffer
wrapper: function (buffer) {
// E.g. decompress data and return it for further parsing
return zlib.inflateRawSync(buffer);
},
// The parser to run on the decompressed data
type: textParser,
});
mainParser.parse(buffer);
Returns how many bytes this parser consumes. If the size of the parser cannot
be statically determined, a NaN is returned.
Compile this parser on-the-fly and cache its result. Usually, there is no need
to call this method directly, since it's called when parse(buffer) or encode(obj) is
executed for the first time.
Dynamically generates the code for this parser/encoder and returns it as a string. Useful for debugging the generated code.
These options can be used in all parsers.
formatter - Function that transforms the parsed value into a more desired
form. formatter(value, obj, buffer, offset) → new value
where value is the value to be formatted, obj is the current object being generated, buffer is the buffer currently beeing parsed and offset is the current offset in that buffer.
const parser = new Parser().array("ipv4", {
type: uint8,
length: "4",
formatter: function(arr, obj, buffer, offset) {
return arr.join(".");
}
});
encoder - Function that transforms an object property into a more desired
form for encoding. This is the opposite of the above formatter function.
encoder(value) → new value
where value is the value to be encoded (de-formatted) and obj is the object currently being encoded.
const parser = new Parser().array("ipv4", {
type: uint8,
length: "4",
formatter: function(arr, obj, buffer, offset) {
return arr.join(".");
},
encoder: function(str, obj) {
return str.split(".");
}
});
assert - Do assertion on the parsed result (useful for checking magic
numbers and so on). If assert is a string or number, the actual parsed
result will be compared with it with === (strict equality check), and an
exception is thrown if they mismatch. On the other hand, if assert is a
function, that function is executed with one argument (the parsed result)
and if it returns false, an exception is thrown.
// simple maginc number validation
const ClassFile = Parser.start()
.endianness("big")
.uint32("magic", { assert: 0xcafebabe });
// Doing more complex assertion with a predicate function
const parser = new Parser()
.int16le("a")
.int16le("b")
.int16le("c", {
assert: function(x) {
return this.a + this.b === x;
}
});
You can use some special fields while parsing to traverse your structure.
These context variables will be removed after the parsing process.
Note that this feature is turned off by default for performance reasons, and
you need to call .useContextVars() at the top level Parser to enable it.
Otherwise, the context variables will not be present.
$parent - This field references the parent structure. This variable will be
null while parsing the root structure.
var parser = new Parser()
.useContextVars()
.nest("header", {
type: new Parser().uint32("length"),
})
.array("data", {
type: "int32",
length: function() {
return this.$parent.header.length;
}
});
$root - This field references the root structure.
const parser = new Parser()
.useContextVars()
.nest("header", {
type: new Parser().uint32("length"),
})
.nest("data", {
type: new Parser()
.uint32("value")
.array("data", {
type: "int32",
length: function() {
return this.$root.header.length;
}
}),
});
$index - This field references the actual index in array parsing. This
variable will be available only when using the length mode for arrays.
const parser = new Parser()
.useContextVars()
.nest("header", {
type: new Parser().uint32("length"),
})
.nest("data", {
type: new Parser()
.uint32("value")
.array("data", {
type: new Parser().nest({
type: new Parser().uint8("_tmp"),
formatter: function(item) {
return this.$index % 2 === 0 ? item._tmp : String.fromCharCode(item._tmp);
}
}),
length: "$root.header.length"
}),
});
See example/ for real-world examples.
A benchmark script to compare the parsing performance with binparse, structron
and destruct.js is available under benchmark/.
Please report issues to the issue tracker if you have any difficulties using this module, found a bug, or would like to request a new feature. Pull requests are welcome.
To contribute code, first clone this repo, then install the dependencies:
git clone https://github.com/keichi/binary-parser.git
cd binary-parser
npm install
If you added a feature or fixed a bug, update the test suite under test/ and
then run it like this:
npm run test
Make sure all the tests pass before submitting a pull request.
FAQs
Blazing-fast binary parser / encoder builder
The npm package binary-parser-encoder-bump receives a total of 2 weekly downloads. As such, binary-parser-encoder-bump popularity was classified as not popular.
We found that binary-parser-encoder-bump demonstrated a not healthy version release cadence and project activity because the last version was released a year ago. It has 0 open source maintainers collaborating on the project.
Did you know?
Socket for GitHub automatically highlights issues in each pull request and monitors the health of all your open source dependencies. Discover the contents of your packages and block harmful activity before you install or update your dependencies.
Security News
Multiple high-impact npm maintainers confirm they have been targeted in the same social engineering campaign that compromised Axios.
Security News
Axios compromise traced to social engineering, showing how attacks on maintainers can bypass controls and expose the broader software supply chain.
Security News
Node.js has paused its bug bounty program after funding ended, removing payouts for vulnerability reports but keeping its security process unchanged.