.. image:: logo/logo-220x200.png
Lupa integrates the runtimes of Lua_ or LuaJIT2_ into CPython. It is a partial rewrite of LunaticPython_ in Cython_ with some additional features such as proper coroutine support.
.. _Lua: http://lua.org/ .. _LuaJIT2: http://luajit.org/ .. _LunaticPython: http://labix.org/lunatic-python .. _Cython: http://cython.org
For questions not answered here, please contact the Lupa mailing list_.
.. _Lupa mailing list: http://www.freelists.org/list/lupa-dev
.. contents:: :local:
separate Lua runtime states through a LuaRuntime class
Python coroutine wrapper for Lua coroutines
iteration support for Python objects in Lua and Lua objects in Python
proper encoding and decoding of strings (configurable per runtime, UTF-8 by default)
frees the GIL and supports threading in separate runtimes when calling into Lua
tested with Python 2.7/3.6 and later
ships with Lua 5.1, 5.2, 5.3 and 5.4 as well as LuaJIT 2.0 and 2.1 on systems that support it.
easy to hack on and extend as it is written in Cython, not C
In Latin, "lupa" is a female wolf, as elegant and wild as it sounds. If you don't like this kind of straight forward allegory to an endangered species, you may also happily assume it's just an amalgamation of the phonetic sounds that start the words "Lua" and "Python", two from each to keep the balance.
It complements Python very well. Lua is a language as dynamic as Python, but LuaJIT compiles it to very fast machine code, sometimes faster than many statically compiled languages for computational code. The language runtime is very small and carefully designed for embedding. The complete binary module of Lupa, including a statically linked LuaJIT2 runtime, only weighs some 800KB on a 64 bit machine. With standard Lua 5.2, it's less than 600KB.
However, the Lua ecosystem lacks many of the batteries that Python readily includes, either directly in its standard library or as third party packages. This makes real-world Lua applications harder to write than equivalent Python applications. Lua is therefore not commonly used as primary language for large applications, but it makes for a fast, high-level and resource-friendly backup language inside of Python when raw speed is required and the edit-compile-run cycle of binary extension modules is too heavy and too static for agile development or hot-deployment.
Lupa is a very fast and thin wrapper around Lua or LuaJIT. It makes it easy to write dynamic Lua code that accompanies dynamic Python code by switching between the two languages at runtime, based on the tradeoff between simplicity and speed.
The binary wheels include different Lua versions as well as LuaJIT, if supported.
By default, import lupa uses the latest Lua version, but you can choose
a specific one via import:
.. code:: python
try:
import lupa.luajit21 as lupa
except ImportError:
try:
import lupa.lua54 as lupa
except ImportError:
try:
import lupa.lua53 as lupa
except ImportError:
import lupa
print(f"Using {lupa.LuaRuntime().lua_implementation} (compiled with {lupa.LUA_VERSION})")
.. >>> import lupa.lua54 as lupa
## doctest helpers:
>>> try: _ = sorted
... except NameError:
... def sorted(seq):
... l = list(seq)
... l.sort()
... return l
.. code:: python
>>> from lupa.lua54 import LuaRuntime
>>> lua = LuaRuntime(unpack_returned_tuples=True)
>>> lua.eval('1+1')
2
>>> lua_func = lua.eval('function(f, n) return f(n) end')
>>> def py_add1(n): return n+1
>>> lua_func(py_add1, 2)
3
>>> lua.eval('python.eval(" 2 ** 2 ")') == 4
True
>>> lua.eval('python.builtins.str(4)') == '4'
True
The function lua_type(obj) can be used to find out the type of a
wrapped Lua object in Python code, as provided by Lua's type()
function:
.. code:: python
>>> lupa.lua_type(lua_func)
'function'
>>> lupa.lua_type(lua.eval('{}'))
'table'
To help in distinguishing between wrapped Lua objects and normal
Python objects, it returns None for the latter:
.. code:: python
>>> lupa.lua_type(123) is None
True
>>> lupa.lua_type('abc') is None
True
>>> lupa.lua_type({}) is None
True
Note the flag unpack_returned_tuples=True that is passed to create
the Lua runtime. It is new in Lupa 0.21 and changes the behaviour of
tuples that get returned by Python functions. With this flag, they
explode into separate Lua values:
.. code:: python
>>> lua.execute('a,b,c = python.eval("(1,2)")')
>>> g = lua.globals()
>>> g.a
1
>>> g.b
2
>>> g.c is None
True
When set to False, functions that return a tuple pass it through to the Lua code:
.. code:: python
>>> non_explode_lua = lupa.LuaRuntime(unpack_returned_tuples=False)
>>> non_explode_lua.execute('a,b,c = python.eval("(1,2)")')
>>> g = non_explode_lua.globals()
>>> g.a
(1, 2)
>>> g.b is None
True
>>> g.c is None
True
Since the default behaviour (to not explode tuples) might change in a later version of Lupa, it is best to always pass this flag explicitly.
Python objects are either converted when passed into Lua (e.g. numbers and strings) or passed as wrapped object references.
.. code:: python
>>> wrapped_type = lua.globals().type # Lua's own type() function
>>> wrapped_type(1) == 'number'
True
>>> wrapped_type('abc') == 'string'
True
Wrapped Lua objects get unwrapped when they are passed back into Lua, and arbitrary Python objects get wrapped in different ways:
.. code:: python
>>> wrapped_type(wrapped_type) == 'function' # unwrapped Lua function
True
>>> wrapped_type(len) == 'userdata' # wrapped Python function
True
>>> wrapped_type([]) == 'userdata' # wrapped Python object
True
Lua supports two main protocols on objects: calling and indexing. It
does not distinguish between attribute access and item access like
Python does, so the Lua operations obj[x] and obj.x both map
to indexing. To decide which Python protocol to use for Lua wrapped
objects, Lupa employs a simple heuristic.
Pratically all Python objects allow attribute access, so if the object
also has a __getitem__ method, it is preferred when turning it
into an indexable Lua object. Otherwise, it becomes a simple object
that uses attribute access for indexing from inside Lua.
Obviously, this heuristic will fail to provide the required behaviour
in many cases, e.g. when attribute access is required to an object
that happens to support item access. To be explicit about the
protocol that should be used, Lupa provides the helper functions
as_attrgetter() and as_itemgetter() that restrict the view on
an object to a certain protocol, both from Python and from inside
Lua:
.. code:: python
>>> lua_func = lua.eval('function(obj) return obj["get"] end')
>>> d = {'get' : 'value'}
>>> value = lua_func(d)
>>> value == d['get'] == 'value'
True
>>> value = lua_func( lupa.as_itemgetter(d) )
>>> value == d['get'] == 'value'
True
>>> dict_get = lua_func( lupa.as_attrgetter(d) )
>>> dict_get == d.get
True
>>> dict_get('get') == d.get('get') == 'value'
True
>>> lua_func = lua.eval(
... 'function(obj) return python.as_attrgetter(obj)["get"] end')
>>> dict_get = lua_func(d)
>>> dict_get('get') == d.get('get') == 'value'
True
Note that unlike Lua function objects, callable Python objects support indexing in Lua:
.. code:: python
>>> def py_func(): pass
>>> py_func.ATTR = 2
>>> lua_func = lua.eval('function(obj) return obj.ATTR end')
>>> lua_func(py_func)
2
>>> lua_func = lua.eval(
... 'function(obj) return python.as_attrgetter(obj).ATTR end')
>>> lua_func(py_func)
2
>>> lua_func = lua.eval(
... 'function(obj) return python.as_attrgetter(obj)["ATTR"] end')
>>> lua_func(py_func)
2
Iteration over Python objects from Lua's for-loop is fully supported.
However, Python iterables need to be converted using one of the
utility functions which are described here. This is similar to the
functions like pairs() in Lua.
To iterate over a plain Python iterable, use the python.iter()
function. For example, you can manually copy a Python list into a Lua
table like this:
.. code:: python
>>> lua_copy = lua.eval('''
... function(L)
... local t, i = {}, 1
... for item in python.iter(L) do
... t[i] = item
... i = i + 1
... end
... return t
... end
... ''')
>>> table = lua_copy([1,2,3,4])
>>> len(table)
4
>>> table[1] # Lua indexing
1
Python's enumerate() function is also supported, so the above
could be simplified to:
.. code:: python
>>> lua_copy = lua.eval('''
... function(L)
... local t = {}
... for index, item in python.enumerate(L) do
... t[ index+1 ] = item
... end
... return t
... end
... ''')
>>> table = lua_copy([1,2,3,4])
>>> len(table)
4
>>> table[1] # Lua indexing
1
For iterators that return tuples, such as dict.iteritems(), it is
convenient to use the special python.iterex() function that
automatically explodes the tuple items into separate Lua arguments:
.. code:: python
>>> lua_copy = lua.eval('''
... function(d)
... local t = {}
... for key, value in python.iterex(d.items()) do
... t[key] = value
... end
... return t
... end
... ''')
>>> d = dict(a=1, b=2, c=3)
>>> table = lua_copy( lupa.as_attrgetter(d) )
>>> table['b']
2
Note that accessing the d.items method from Lua requires passing
the dict as attrgetter. Otherwise, attribute access in Lua would
use the getitem protocol of Python dicts and look up d['items']
instead.
While None in Python and nil in Lua differ in their semantics, they
usually just mean the same thing: no value. Lupa therefore tries to map one
directly to the other whenever possible:
.. code:: python
>>> lua.eval('nil') is None
True
>>> is_nil = lua.eval('function(x) return x == nil end')
>>> is_nil(None)
True
The only place where this cannot work is during iteration, because Lua
considers a nil value the termination marker of iterators. Therefore,
Lupa special cases None values here and replaces them by a constant
python.none instead of returning nil:
.. code:: python
>>> _ = lua.require("table")
>>> func = lua.eval('''
... function(items)
... local t = {}
... for value in python.iter(items) do
... table.insert(t, value == python.none)
... end
... return t
... end
... ''')
>>> items = [1, None ,2]
>>> list(func(items).values())
[False, True, False]
Lupa avoids this value escaping whenever it's obviously not necessary.
Thus, when unpacking tuples during iteration, only the first value will
be subject to python.none replacement, as Lua does not look at the
other items for loop termination anymore. And on enumerate()
iteration, the first value is known to be always a number and never None,
so no replacement is needed.
.. code:: python
>>> func = lua.eval('''
... function(items)
... for a, b, c, d in python.iterex(items) do
... return {a == python.none, a == nil, --> a == python.none
... b == python.none, b == nil, --> b == nil
... c == python.none, c == nil, --> c == nil
... d == python.none, d == nil} --> d == nil ...
... end
... end
... ''')
>>> items = [(None, None, None, None)]
>>> list(func(items).values())
[True, False, False, True, False, True, False, True]
>>> items = [(None, None)] # note: no values for c/d => nil in Lua
>>> list(func(items).values())
[True, False, False, True, False, True, False, True]
Note that this behaviour changed in Lupa 1.0. Previously, the python.none
replacement was done in more places, which made it not always very predictable.
Lua tables mimic Python's mapping protocol. For the special case of array tables, Lua automatically inserts integer indices as keys into the table. Therefore, indexing starts from 1 as in Lua instead of 0 as in Python. For the same reason, negative indexing does not work. It is best to think of Lua tables as mappings rather than arrays, even for plain array tables.
.. code:: python
>>> table = lua.eval('{10,20,30,40}')
>>> table[1]
10
>>> table[4]
40
>>> list(table)
[1, 2, 3, 4]
>>> dict(table)
{1: 10, 2: 20, 3: 30, 4: 40}
>>> list(table.values())
[10, 20, 30, 40]
>>> len(table)
4
>>> mapping = lua.eval('{ [1] = -1 }')
>>> list(mapping)
[1]
>>> mapping = lua.eval('{ [20] = -20; [3] = -3 }')
>>> mapping[20]
-20
>>> mapping[3]
-3
>>> sorted(mapping.values())
[-20, -3]
>>> sorted(mapping.items())
[(3, -3), (20, -20)]
>>> mapping[-3] = 3 # -3 used as key, not index!
>>> mapping[-3]
3
>>> sorted(mapping)
[-3, 3, 20]
>>> sorted(mapping.items())
[(-3, 3), (3, -3), (20, -20)]
To simplify the table creation from Python, the LuaRuntime comes with
a helper method that creates a Lua table from Python arguments:
.. code:: python
>>> t = lua.table(10, 20, 30, 40)
>>> lupa.lua_type(t)
'table'
>>> list(t)
[1, 2, 3, 4]
>>> list(t.values())
[10, 20, 30, 40]
>>> t = lua.table(10, 20, 30, 40, a=1, b=2)
>>> t[3]
30
>>> t['b']
2
A second helper method, .table_from(), was added in Lupa 1.1 and accepts
any number of mappings and sequences/iterables as arguments. It collects
all values and key-value pairs and builds a single Lua table from them.
Any keys that appear in multiple mappings get overwritten with their last
value (going from left to right).
.. code:: python
>>> t = lua.table_from([10, 20, 30], {'a': 11, 'b': 22}, (40, 50), {'b': 42})
>>> t['a']
11
>>> t['b']
42
>>> t[5]
50
>>> sorted(t.values())
[10, 11, 20, 30, 40, 42, 50]
Since Lupa 2.1, passing recursive=True will map data structures recursively
to Lua tables.
.. code:: python
>>> t = lua.table_from(
... [
... # t1:
... [
... [10, 20, 30],
... {'a': 11, 'b': 22}
... ],
... # t2:
... [
... (40, 50),
... {'b': 42}
... ]
... ],
... recursive=True
... )
>>> t1, t2 = t.values()
>>> list(t1[1].values())
[10, 20, 30]
>>> t1[2]['a']
11
>>> t1[2]['b']
22
>>> t2[2]['b']
42
>>> list(t1[1].values())
[10, 20, 30]
>>> list(t2[1].values())
[40, 50]
A lookup of non-existing keys or indices returns None (actually nil
inside of Lua). A lookup is therefore more similar to the .get()
method of Python dicts than to a mapping lookup in Python.
.. code:: python
>>> table = lua.table(10, 20, 30, 40)
>>> table[1000000] is None
True
>>> table['no such key'] is None
True
>>> mapping = lua.eval('{ [20] = -20; [3] = -3 }')
>>> mapping['no such key'] is None
True
Note that len() does the right thing for array tables but does not
work on mappings:
.. code:: python
>>> len(table)
4
>>> len(mapping)
0
This is because len() is based on the # (length) operator in
Lua and because of the way Lua defines the length of a table.
Remember that unset table indices always return nil, including
indices outside of the table size. Thus, Lua basically looks for an
index that returns nil and returns the index before that. This
works well for array tables that do not contain nil values, gives
barely predictable results for tables with 'holes' and does not work
at all for mapping tables. For tables with both sequential and
mapping content, this ignores the mapping part completely.
Note that it is best not to rely on the behaviour of len() for mappings. It might change in a later version of Lupa.
Similar to the table interface provided by Lua, Lupa also supports attribute access to table members:
.. code:: python
>>> table = lua.eval('{ a=1, b=2 }')
>>> table.a, table.b
(1, 2)
>>> table.a == table['a']
True
This enables access to Lua 'methods' that are associated with a table, as used by the standard library modules:
.. code:: python
>>> string = lua.eval('string') # get the 'string' library table
>>> print( string.lower('A') )
a
As discussed earlier, Lupa allows Lua scripts to call Python functions and methods:
.. code:: python
>>> def add_one(num):
... return num + 1
>>> lua_func = lua.eval('function(num, py_func) return py_func(num) end')
>>> lua_func(48, add_one)
49
>>> class MyClass():
... def my_method(self):
... return 345
>>> obj = MyClass()
>>> lua_func = lua.eval('function(py_obj) return py_obj:my_method() end')
>>> lua_func(obj)
345
Lua doesn't have a dedicated syntax for named arguments, so by default Python callables can only be called using positional arguments.
A common pattern for implementing named arguments in Lua is passing them
in a table as the first and only function argument. See
http://lua-users.org/wiki/NamedParameters for more details. Lupa supports
this pattern by providing two decorators: lupa.unpacks_lua_table
for Python functions and lupa.unpacks_lua_table_method for methods
of Python objects.
Python functions/methods wrapped in these decorators can be called from
Lua code as func(foo, bar), func{foo=foo, bar=bar}
or func{foo, bar=bar}. Example:
.. code:: python
>>> @lupa.unpacks_lua_table
... def add(a, b):
... return a + b
>>> lua_func = lua.eval('function(a, b, py_func) return py_func{a=a, b=b} end')
>>> lua_func(5, 6, add)
11
>>> lua_func = lua.eval('function(a, b, py_func) return py_func{a, b=b} end')
>>> lua_func(5, 6, add)
11
If you do not control the function implementation, you can also just manually wrap a callable object when passing it into Lupa:
.. code:: python
>>> import operator
>>> wrapped_py_add = lupa.unpacks_lua_table(operator.add)
>>> lua_func = lua.eval('function(a, b, py_func) return py_func{a, b} end')
>>> lua_func(5, 6, wrapped_py_add)
11
There are some limitations:
Avoid using lupa.unpacks_lua_table and lupa.unpacks_lua_table_method
for functions where the first argument can be a Lua table. In this case
py_func{foo=bar} (which is the same as py_func({foo=bar}) in Lua)
becomes ambiguous: it could mean either "call py_func with a named
foo argument" or "call py_func with a positional {foo=bar}
argument".
One should be careful with passing nil values to callables wrapped in
lupa.unpacks_lua_table or lupa.unpacks_lua_table_method decorators.
Depending on the context, passing nil as a parameter can mean either
"omit a parameter" or "pass None". This even depends on the Lua version.
It is possible to use python.none instead of nil to pass None values
robustly. Arguments with nil values are also fine when standard braces
func(a, b, c) syntax is used.
Because of these limitations lupa doesn't enable named arguments for all Python callables automatically. Decorators allow to enable named arguments on a per-callable basis.
The next is an example of Lua coroutines. A wrapped Lua coroutine
behaves exactly like a Python coroutine. It needs to get created at
the beginning, either by using the .coroutine() method of a
function or by creating it in Lua code. Then, values can be sent into
it using the .send() method or it can be iterated over. Note that
the .throw() method is not supported, though.
.. code:: python
>>> lua_code = '''\
... function(N)
... for i=0,N do
... coroutine.yield( i%2 )
... end
... end
... '''
>>> lua = LuaRuntime()
>>> f = lua.eval(lua_code)
>>> gen = f.coroutine(4)
>>> list(enumerate(gen))
[(0, 0), (1, 1), (2, 0), (3, 1), (4, 0)]
An example where values are passed into the coroutine using its
.send() method:
.. code:: python
>>> lua_code = '''\
... function()
... local t,i = {},0
... local value = coroutine.yield()
... while value do
... t[i] = value
... i = i + 1
... value = coroutine.yield()
... end
... return t
... end
... '''
>>> f = lua.eval(lua_code)
>>> co = f.coroutine() # create coroutine
>>> co.send(None) # start coroutine (stops at first yield)
>>> for i in range(3):
... co.send(i*2)
>>> mapping = co.send(None) # loop termination signal
>>> sorted(mapping.items())
[(0, 0), (1, 2), (2, 4)]
It also works to create coroutines in Lua and to pass them back into Python space:
.. code:: python
>>> lua_code = '''\
... function f(N)
... for i=0,N do
... coroutine.yield( i%2 )
... end
... end ;
... co1 = coroutine.create(f) ;
... co2 = coroutine.create(f) ;
...
... status, first_result = coroutine.resume(co2, 2) ; -- starting!
...
... return f, co1, co2, status, first_result
... '''
>>> lua = LuaRuntime()
>>> f, co, lua_gen, status, first_result = lua.execute(lua_code)
>>> # a running coroutine:
>>> status
True
>>> first_result
0
>>> list(lua_gen)
[1, 0]
>>> list(lua_gen)
[]
>>> # an uninitialised coroutine:
>>> gen = co(4)
>>> list(enumerate(gen))
[(0, 0), (1, 1), (2, 0), (3, 1), (4, 0)]
>>> gen = co(2)
>>> list(enumerate(gen))
[(0, 0), (1, 1), (2, 0)]
>>> # a plain function:
>>> gen = f.coroutine(4)
>>> list(enumerate(gen))
[(0, 0), (1, 1), (2, 0), (3, 1), (4, 0)]
The following example calculates a mandelbrot image in parallel
threads and displays the result in PIL. It is based on a benchmark implementation_ for the Computer Language Benchmarks Game_.
.. _Computer Language Benchmarks Game: http://shootout.alioth.debian.org/u64/benchmark.php?test=all&lang=luajit&lang2=python3
.. _benchmark implementation: http://shootout.alioth.debian.org/u64/program.php?test=mandelbrot&lang=luajit&id=1
.. code:: python
lua_code = '''\
function(N, i, total)
local char, unpack = string.char, table.unpack
local result = ""
local M, ba, bb, buf = 2/N, 2^(N%8+1)-1, 2^(8-N%8), {}
local start_line, end_line = N/total * (i-1), N/total * i - 1
for y=start_line,end_line do
local Ci, b, p = y*M-1, 1, 0
for x=0,N-1 do
local Cr = x*M-1.5
local Zr, Zi, Zrq, Ziq = Cr, Ci, Cr*Cr, Ci*Ci
b = b + b
for i=1,49 do
Zi = Zr*Zi*2 + Ci
Zr = Zrq-Ziq + Cr
Ziq = Zi*Zi
Zrq = Zr*Zr
if Zrq+Ziq > 4.0 then b = b + 1; break; end
end
if b >= 256 then p = p + 1; buf[p] = 511 - b; b = 1; end
end
if b ~= 1 then p = p + 1; buf[p] = (ba-b)*bb; end
result = result .. char(unpack(buf, 1, p))
end
return result
end
'''
image_size = 1280 # == 1280 x 1280
thread_count = 8
from lupa import LuaRuntime
lua_funcs = [ LuaRuntime(encoding=None).eval(lua_code)
for _ in range(thread_count) ]
results = [None] * thread_count
def mandelbrot(i, lua_func):
results[i] = lua_func(image_size, i+1, thread_count)
import threading
threads = [ threading.Thread(target=mandelbrot, args=(i,lua_func))
for i, lua_func in enumerate(lua_funcs) ]
for thread in threads:
thread.start()
for thread in threads:
thread.join()
result_buffer = b''.join(results)
# use Pillow to display the image
from PIL import Image
image = Image.frombytes('1', (image_size, image_size), result_buffer)
image.show()
Note how the example creates a separate LuaRuntime for each thread
to enable parallel execution. Each LuaRuntime is protected by a
global lock that prevents concurrent access to it. The low memory
footprint of Lua makes it reasonable to use multiple runtimes, but
this setup also means that values cannot easily be exchanged between
threads inside of Lua. They must either get copied through Python
space (passing table references will not work, either) or use some Lua
mechanism for explicit communication, such as a pipe or some kind of
shared memory setup.
.. >>> try: unicode = unicode ... except NameError: unicode = str
Lupa provides a simple mechanism to control access to Python objects. Each attribute access can be passed through a filter function as follows:
.. code:: python
>>> def filter_attribute_access(obj, attr_name, is_setting):
... if isinstance(attr_name, unicode):
... if not attr_name.startswith('_'):
... return attr_name
... raise AttributeError('access denied')
>>> lua = lupa.LuaRuntime(
... register_eval=False,
... attribute_filter=filter_attribute_access)
>>> func = lua.eval('function(x) return x.__class__ end')
>>> func(lua)
Traceback (most recent call last):
...
AttributeError: access denied
The is_setting flag indicates whether the attribute is being read
or set.
Note that the attributes of Python functions provide access to the
current globals() and therefore to the builtins etc. If you want
to safely restrict access to a known set of Python objects, it is best
to work with a whitelist of safe attribute names. One way to do that
could be to use a well selected list of dedicated API objects that you
provide to Lua code, and to only allow Python attribute access to the
set of public attribute/method names of these objects.
Since Lupa 1.0, you can alternatively provide dedicated getter and
setter function implementations for a LuaRuntime:
.. code:: python
>>> def getter(obj, attr_name):
... if attr_name == 'yes':
... return getattr(obj, attr_name)
... raise AttributeError(
... 'not allowed to read attribute "%s"' % attr_name)
>>> def setter(obj, attr_name, value):
... if attr_name == 'put':
... setattr(obj, attr_name, value)
... return
... raise AttributeError(
... 'not allowed to write attribute "%s"' % attr_name)
>>> class X(object):
... yes = 123
... put = 'abc'
... noway = 2.1
>>> x = X()
>>> lua = lupa.LuaRuntime(attribute_handlers=(getter, setter))
>>> func = lua.eval('function(x) return x.yes end')
>>> func(x) # getting 'yes'
123
>>> func = lua.eval('function(x) x.put = "ABC"; end')
>>> func(x) # setting 'put'
>>> print(x.put)
ABC
>>> func = lua.eval('function(x) x.noway = 42; end')
>>> func(x) # setting 'noway'
Traceback (most recent call last):
...
AttributeError: not allowed to write attribute "noway"
Lupa provides a simple mechanism to control the maximum memory
usage of the Lua Runtime since version 2.0.
By default Lupa does not interfere with Lua's memory allocation, to opt-in
you must set the max_memory when creating the LuaRuntime.
The LuaRuntime provides three methods for controlling and reading the
memory usage:
get_memory_used(total=False) to get the current memory
usage of the LuaRuntime.
get_max_memory(total=False) to get the current memory limit.
0 means there is no memory limitation.
set_max_memory(max_memory, total=False) to change the memory limit.
Values below or equal to 0 mean no limit.
There is always some memory used by the LuaRuntime itself (around ~20KiB,
depending on your lua version and other factors) which is excluded from all
calculations unless you specify total=True.
.. code:: python
>>> from lupa import lua52
>>> lua = lua52.LuaRuntime(max_memory=0) # 0 for unlimited, default is None
>>> lua.get_memory_used() # memory used by your code
0
>>> total_lua_memory = lua.get_memory_used(total=True) # includes memory used by the runtime itself
>>> assert total_lua_memory > 0 # exact amount depends on your lua version and other factors
Lua code hitting the memory limit will receive memory errors:
.. code:: python
>>> lua.set_max_memory(100)
>>> lua.eval("string.rep('a', 1000)") # doctest: +IGNORE_EXCEPTION_DETAIL
Traceback (most recent call last):
...
lupa.LuaMemoryError: not enough memory
LuaMemoryError inherits from LuaError and MemoryError.
This will usually work as is, but here are the details, in case anything goes wrong for you.
To use binary modules in Lua, you need to compile them against the header files of the LuaJIT sources that you used to build Lupa, but do not link them against the LuaJIT library.
Furthermore, CPython needs to enable global symbol visibility for
shared libraries before loading the Lupa module. This can be done by
calling sys.setdlopenflags(flag_values). Importing the lupa
module will automatically try to set up the correct dlopen flags
if it can find the platform specific DLFCN Python module that
defines the necessary flag constants. In that case, using binary
modules in Lua should work out of the box.
If this setup fails, however, you have to set the flags manually.
When using the above configuration call, the argument flag_values
must represent the sum of your system's values for RTLD_NEW and
RTLD_GLOBAL. If RTLD_NEW is 2 and RTLD_GLOBAL is 256, you
need to call sys.setdlopenflags(258).
Assuming that the Lua luaposix_ (posix) module is available, the
following should work on a Linux system:
.. code:: python
>>> import sys
>>> orig_dlflags = sys.getdlopenflags()
>>> sys.setdlopenflags(258)
>>> import lupa
>>> sys.setdlopenflags(orig_dlflags)
>>> lua = lupa.LuaRuntime()
>>> posix_module = lua.require('posix') # doctest: +SKIP
.. _luaposix: http://git.alpinelinux.org/cgit/luaposix
The build is configured to automatically search for an installed version of first LuaJIT and then Lua, and failing to find either, to use the bundled LuaJIT or Lua version.
If you wish to build Lupa with a specific version of Lua, you can configure the following options on setup:
.. list-table:: :widths: 20 35 :header-rows: 1
--lua-lib <libfile>--lua-lib /usr/local/lib/lualib.a--lua-includes <incdir>--lua-includes /usr/local/include--use-bundle--no-bundlepkg-config.--no-lua-jit#) Download and unpack lupa
http://pypi.python.org/pypi/lupa
#) Download LuaJIT2
http://luajit.org/download.html
#) Unpack the archive into the lupa base directory, e.g.::
.../lupa-0.1/LuaJIT-2.0.2
#) Build LuaJIT::
cd LuaJIT-2.0.2
make
cd ..
If you need specific C compiler flags, pass them to make as follows::
make CFLAGS="..."
For trickier target platforms like Windows and MacOS-X, please see
the official installation instructions for LuaJIT_.
NOTE: When building on Windows, make sure that lua51.lib is made in addition to lua51.dll. The MSVC build produces this file, MinGW does NOT.
#) Build lupa::
python setup.py build_ext -i
Or any other distutils target of your choice, such as build
or one of the bdist targets. See the distutils documentation_ for help, also the hints on building extension modules_.
Note that on 64bit MacOS-X installations, the following additional compiler flags are reportedly required due to the embedded LuaJIT::
-pagezero_size 10000 -image_base 100000000
You can find additional installation hints for MacOS-X in this
somewhat unclear blog post_, which may or may not tell you at
which point in the installation process to provide these flags.
Also, on 64bit MacOS-X, you will typically have to set the
environment variable ARCHFLAGS to make sure it only builds
for your system instead of trying to generate a fat binary with
both 32bit and 64bit support::
export ARCHFLAGS="-arch x86_64"
Note that this applies to both LuaJIT and Lupa, so make sure you try a clean build of everything if you forgot to set it initially.
.. _installation instructions for LuaJIT: http://luajit.org/install.html
.. _somewhat unclear blog post: http://t-p-j.blogspot.com/2010/11/lupa-on-os-x-with-macports-python-26.html
.. _distutils documentation: http://docs.python.org/install/index.html#install-index
.. _hints on building extension modules: http://docs.python.org/install/index.html#building-extensions-tips-and-tricks
It also works to use Lupa with the standard (non-JIT) Lua runtime. The easiest way is to use the bundled lua submodule:
#) Clone the submodule::
$ git submodule update --init third-party/lua
#) Build Lupa::
$ python3 setup.py bdist_wheel --use-bundle --with-cython
You can also build it by installing a Lua 5.x package, including
any development packages (header files etc.). On systems that
use the "pkg-config" configuration mechanism, Lupa's
setup.py will pick up either LuaJIT2 or Lua automatically, with a
preference for LuaJIT2 if it is found. Pass the --no-luajit option
to the setup.py script if you have both installed but do not want to
use LuaJIT2.
On other systems, you may have to supply the build parameters
externally, e.g. using environment variables or by changing the
setup.py script manually. Pass the --no-luajit option to the
setup.py script in order to ignore the failure you get when neither
LuaJIT2 nor Lua are found automatically.
For further information, read this mailing list post:
https://www.freelists.org/post/lupa-dev/Lupa-with-normal-Lua-interpreter-Lua-51,2
#) Install Lua 5.2 development package::
$ apt-get install liblua5.2-dev
#) Install lupa::
$ pip install lupa
#) Install LuaJIT2 development package::
$ apt-get install libluajit-5.1-dev
#) Install lupa::
$ pip install lupa
Depending on OS version, you might get an older LuaJIT2 version.
#) Install Lua::
$ brew install lua
#) Install pkg-config::
$ brew install pkg-config
#) Install lupa::
$ pip install lupa
The windows wheels now bundle LuaJIT 2.0 and 2.1. (patch by Michal Plichta)
Failures in the test suite didn't set a non-zero process exit value.
The bundled LuaJIT versions were updated to the latest git branches.
The bundled Lua 5.4 was updated to 5.4.7.
Removed support for Python 2.x.
Built with Cython 3.0.11.
A new method LuaRuntime.gccollect() was added to trigger the Lua garbage collector.
A new context manager LuaRuntime.nogc() was added to temporarily disable the Lua
garbage collector.
Freeing Python objects from a thread while running Lua code could run into a deadlock.
The bundled LuaJIT versions were updated to the latest git branches.
Built with Cython 3.0.10.
GH#199: The table_from() method gained a new keyword argument recursive=False.
If true, Python data structures will be recursively mapped to Lua tables,
taking care of loops and duplicates via identity de-duplication.
GH#248: The LuaRuntime methods "eval", "execute" and "compile" gained new
keyword options mode and name that allow constraining the input type
and modifying the (chunk) name shown in error messages, following similar
arguments in the Lua load() function.
See https://www.lua.org/manual/5.4/manual.html#pdf-load
GH#246: Loading Lua modules did not work for the version specific Lua modules introduced in Lupa 2.0. It turned out that it can only be enabled for one of them in a given Python run, so it is now left to users to enable it explicitly at need. (original patch by Richard Connon)
GH#234: The bundled Lua 5.1 was updated to 5.1.5 and Lua 5.2 to 5.2.4. (patch by xxyzz)
The bundled Lua 5.4 was updated to 5.4.6.
The bundled LuaJIT versions were updated to the latest git branches.
Built with Cython 3.0.9 for improved support of Python 3.12/13.
GH#217: Lua stack traces in Python exception messages are now reversed to match the order of Python stack traces.
GH#196: Lupa now ships separate extension modules built with Lua 5.3, Lua 5.4, LuaJIT 2.0 and LuaJIT 2.1 beta. Note that this is build specific and may depend on the platform. A normal Python import cascade can be used.
GH#211: A new option max_memory allows to limit the memory usage of Lua code.
(patch by Leo Developer)
GH#171: Python references in Lua are now more safely reference counted to prevent garbage collection glitches. (patch by Guilherme Dantas)
GH#146: Lua integers in Lua 5.3+ are converted from and to Python integers. (patch by Guilherme Dantas)
GH#180: The python.enumerate() function now returns indices as integers
if supported by Lua.
(patch by Guilherme Dantas)
GH#178: The Lua integer limits can be read from the module as
LUA_MAXINTEGER and LUA_MININTEGER.
(patch by Guilherme Dantas)
GH#174: Failures while calling the __index method in Lua during a
table index lookup from Python could crash Python.
(patch by Guilherme Dantas)
GH#137: Passing None as a dict key into table_from() crashed.
(patch by Leo Developer)
GH#176: A new function python.args(*args, **kwargs) was added
to help with building Python argument tuples and keyword argument dicts
for Python function calls from Lua code.
GH#177: Tables that are not sequences raise IndexError when unpacking
them. Previously, non-sequential items were simply ignored.
GH#179: Resolve some C compiler warnings about signed/unsigned comparisons. (patch by Guilherme Dantas)
Built with Cython 0.29.34.
GH#197: Some binary wheels in the last releases were not correctly linked with Lua.
GH#194: An absolute file path appeared in the SOURCES.txt metadata
of the source distribution.
Use Lua 5.4.4 in binary wheels and as bundled Lua.
Built with Cython 0.29.28 to support Python 3.10/11.
GH#147: Lua 5.4 is supported. (patch by Russel Davis)
The runtime version of the Lua library as a tuple (e.g. (5,3))
is provided via lupa.LUA_VERSION and LuaRuntime.lua_version.
The Lua implementation name and version string is provided as
LuaRuntime.lua_implementation.
setup.py accepts new command line arguments --lua-lib and --lua-includes
to specify the
Use Lua 5.4.3 in binary wheels and as bundled Lua.
Built with Cython 0.29.24 to support Python 3.9.
Build against Lua 5.3 if available.
Use Lua 5.3.5 in binary wheels and as bundled Lua.
GH#129: Fix Lua module loading in Python 3.x.
GH#126: Fix build on Linux systems that install Lua as "lua52" package.
Built with Cython 0.29.14 for better Py3.8 compatibility.
GH#107: Fix a deprecated import in Py3.
Built with Cython 0.29.3 for better Py3.7 compatibility.
GH#93: New method LuaRuntime.compile() to compile Lua code
without executing it.
(patch by TitanSnow)
GH#91: Lua 5.3 is bundled in the source distribution to simplify one-shot installs. (patch by TitanSnow)
GH#87: Lua stack trace is included in output in debug mode. (patch by aaiyer)
GH#78: Allow Lua code to intercept Python exceptions. (patch by Sergey Dobrov)
Built with Cython 0.26.1.
GH#82: Lua coroutines were using the wrong runtime state (patch by Sergey Dobrov)
GH#81: copy locally provided Lua DLL into installed package on Windows (patch by Gareth Coles)
built with Cython 0.25.2
GH#70: eval() and execute() accept optional positional arguments
(patch by John Vandenberg)
GH#65: calling str() on a Python object from Lua could fail if the
LuaRuntime is set up without auto-encoding (patch by Mikhail Korobov)
GH#63: attribute/keyword names were not properly encoded if the
LuaRuntime is set up without auto-encoding (patch by Mikhail Korobov)
built with Cython 0.24
callbacks returned from Lua coroutines were incorrectly mixing coroutine state with global Lua state (patch by Mikhail Korobov)
availability of python.builtins in Lua can be disabled via
LuaRuntime option.
built with Cython 0.23.4
new module function lupa.lua_type() that returns the Lua type of
a wrapped object as string, or None for normal Python objects
new helper method LuaRuntime.table_from(...) that creates a Lua
table from one or more Python mappings and/or sequences
new lupa.unpacks_lua_table and lupa.unpacks_lua_table_method
decorators to allow calling Python functions from Lua using named
arguments
fix a hang on shutdown where the LuaRuntime failed to deallocate due to reference cycles
Lupa now plays more nicely with other Lua extensions that create userdata objects
fix a crash when requesting attributes of wrapped Lua coroutine objects
looking up attributes on Lua objects that do not support it now always raises an AttributeError instead of sometimes raising a TypeError depending on the attribute name
NOTE: this release includes the major backwards incompatible changes listed below. It is believed that they simplify the interaction between Python code and Lua code by more strongly following idiomatic Lua on the Lua side.
Instead of passing a wrapped python.none object into Lua, None
return values are now mapped to nil, making them more straight forward
to handle in Lua code. This makes the behaviour more consistent, as it
was previously somewhat arbitrary where none could appear and where a
nil value was used. The only remaining exception is during iteration,
where the first returned value must not be nil in Lua, or otherwise
the loop terminates prematurely. To prevent this, any None value
that the iterator returns, or any first item in exploded tuples that is
None, is still mapped to python.none. Any further values
returned in the same iteration will be mapped to nil if they are
None, not to none. This means that only the first argument
needs to be manually checked for this special case. For the
enumerate() iterator, the counter is never None and thus the
following unpacked items will never be mapped to python.none.
When unpack_returned_tuples=True, iteration now also unpacks tuple
values, including enumerate() iteration, which yields a flat sequence
of counter and unpacked values.
When calling bound Python methods from Lua as "obj:meth()", Lupa now prevents Python from prepending the self argument a second time, so that the Python method is now called as "obj.meth()". Previously, it was called as "obj.meth(obj)". Note that this can be undesired when the object itself is explicitly passed as first argument from Lua, e.g. when calling "func(obj)" where "func" is "obj.meth", but these constellations should be rare. As a work-around for this case, user code can wrap the bound method in another function so that the final call comes from Python.
garbage collection works for reference cycles that span both runtimes, Python and Lua
calling from Python into Lua and back into Python did not clean up the Lua call arguments before the innermost call, so that they could leak into the nested Python call or its return arguments
support for Lua 5.2 (in addition to Lua 5.1 and LuaJIT 2.0)
Lua tables support Python's "del" statement for item deletion (patch by Jason Fried)
Attribute lookup can use a more fine-grained control mechanism by
implementing explicit getter and setter functions for a LuaRuntime
(attribute_handlers argument). Patch by Brian Moe.
item assignments/lookups on Lua objects from Python no longer special case double underscore names (as opposed to attribute lookups)
some garbage collection issues were cleaned up using new Cython features
new LuaRuntime option unpack_returned_tuples which automatically
unpacks tuples returned from Python functions into separate Lua objects
(instead of returning a single Python tuple object)
some internal wrapper classes were removed from the module API
Windows build fixes
Py3.x build fixes
support for building with Lua 5.1 instead of LuaJIT (setup.py --no-luajit)
no longer uses Cython by default when building from released sources (pass
--with-cython to explicitly request a rebuild)
requires Cython 0.20+ when building from unreleased sources
built with Cython 0.20.1
fix "deallocating None" crash while iterating over Lua tables in Python code
support for filtering attribute access to Python objects for Lua code
fix: setting source encoding for Lua code was broken
fix serious resource leak when creating multiple LuaRuntime instances
portability fix for binary module importing
fix iteration by returning Py_None object for None instead
of nil, which would terminate the iteration
when converting Python values to Lua, represent None as a
Py_None object in places where nil has a special meaning,
but leave it as nil where it doesn't hurt
support for counter start value in python.enumerate()
native implementation for python.enumerate() that is several
times faster
much faster Lua iteration over Python objects
new helper function python.enumerate() in Lua that returns a Lua
iterator for a Python object and adds the 0-based index to each
item.
new helper function python.iterex() in Lua that returns a Lua
iterator for a Python object and unpacks any tuples that the
iterator yields.
new helper function python.iter() in Lua that returns a Lua
iterator for a Python object.
reestablished the python.as_function() helper function for Lua
code as it can be needed in cases where Lua cannot determine how to
run a Python function.
dropped python.as_function() helper function for Lua as all
Python objects are callable from Lua now (potentially raising a
TypeError at call time if they are not callable)
fix regression in 0.13 and later where ordinary Lua functions failed to print due to an accidentally used meta table
fix crash when calling str() on wrapped Lua objects without
metatable
fixed undefined behaviour on str(lua_object) when the object's
__tostring() meta method fails
removed redundant "error:" prefix from LuaError messages
access to Python's python.builtins from Lua code
more generic wrapping rules for Python objects based on supported protocols (callable, getitem, getattr)
new helper functions as_attrgetter() and as_itemgetter() to
specify the Python object protocol used by Lua indexing when
wrapping Python objects in Python code
new helper functions python.as_attrgetter(),
python.as_itemgetter() and python.as_function() to specify
the Python object protocol used by Lua indexing of Python objects in
Lua code
item and attribute access for Python objects from Lua code
fix Lua stack leak during table iteration
fix lost Lua object reference after iteration
error reporting on Lua syntax errors failed to clean up the stack so that errors could leak into the next Lua run
Lua error messages were not properly decoded
much faster locking of the LuaRuntime, especially in the single threaded case (see http://code.activestate.com/recipes/577336-fast-re-entrant-optimistic-lock-implemented-in-cyt/)
fixed several error handling problems when executing Python code inside of Lua
fixed Python special double-underscore method access on LuaObject instances
Lua coroutine support through dedicated wrapper classes, including Python iteration support. In Python space, Lua coroutines behave exactly like Python generators.
support for returning multiple values from Lua evaluation
repr() support for Lua objects
LuaRuntime.table() method for creating Lua tables from Python
space
encoding fix for str(LuaObject)
LuaRuntime.require() and LuaRuntime.globals() methods
renamed LuaRuntime.run() to LuaRuntime.execute()
support for len(), setattr() and subscripting of Lua objects
provide all built-in Lua libraries in LuaRuntime, including
support for library loading
fixed a thread locking issue
fix passing Lua objects back into the runtime from Python space
Python iteration support for Lua objects (e.g. tables)
threading fixes
fix compile warnings
attribute read access on Lua objects, e.g. to read Lua table values from Python
str() on Lua objects
include .hg repository in source downloads
added missing files to source distribution
fix several threading issues
safely free the GIL when calling into Lua
Copyright (c) 2010-2017 Stefan Behnel. All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
(See https://www.lua.org/license.html)
Copyright © 1994–2017 Lua.org, PUC-Rio.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
FAQs
Python wrapper around Lua and LuaJIT
We found that lupa demonstrated a healthy version release cadence and project activity because the last version was released less than a year ago. It has 1 open source maintainer collaborating on the project.
Did you know?
Socket for GitHub automatically highlights issues in each pull request and monitors the health of all your open source dependencies. Discover the contents of your packages and block harmful activity before you install or update your dependencies.
Security News
A compromised GitHub Action exposed secrets in CI/CD logs, putting thousands of projects at risk and forcing developers to urgently secure their workflows.
Research
Security News
A malicious Maven package typosquatting a popular library is secretly stealing OAuth credentials on the 15th of each month, putting Java developers at risk.
Security News
Socket and Seal Security collaborate to fix a critical npm overrides bug, resolving a three-year security issue in the JavaScript ecosystem's most popular package manager.