spatialprofilingtoolbox
Advanced tools
By studying microscopic images of specimens of tissue, like skin or organ resections, pathologists and basic scientists can draw inferences about the way that cells coordinate to set biological processes in motion, and how these processes are disrupted in the course of disease.
The taxonomy of cell types and their functional states is surprisingly diverse, and modeling biological processes at the cellular level is consequently a rich source of new insights. Imaging methods are needed that capture some of this diversity, by measuring multiple channels of information at the same time for each cell, to provide empirical data that ensures these models make sense in realistic scenarios.
Multiple-channel imaging technology, capable of measuring several dozen protein targets, is reaching maturity. Multiplexed immunofluoresence, imaging mass cytometry, and their variants measure data similar to what is measured by flow cytometry or single-cell RNA-seq, since this is also at the single-cell level and involves multiple quantitative features, but with the crucial advantage that cell positions are also observed -- spatial context.
The Spatial Profiling Toolbox (SPT) project is about making the most of this informative data source using quality software. The guiding principles are:
| :zap: | High availability | Datasets should be available for analysis immediately with the widest range of tools. Preprocessing and indexing should be done in advance as much as possible. |
| :repeat: | Reproducible analysis | Results and findings should be based on analyses that others can easily recreate in their entirety. |
| :computer: | No code | The tools should be usable by investigators without doing any programming and without the need for specialized knowledge of computer systems. |
| :white_check_mark: | Uniform data management | Datasets should be organized with high semantic integrity, to ensure that analysis can be performed on them in a consistent way and that the conclusions drawn are valid. |
SPT is available to the public at oncopathtk.org.
On the main page, select Melanoma CyTOF ICI. This brings up a dataset that was collected and published by Moldoveanu et al.1.
You'll see a summary of this dataset, including the numbers of samples, cells, and channels, links to relevant publications, classification of the samples, and highlighted findings that can be observed by using the SPT application. In this case the study collected samples from patients treated with immune-checkpoint inhibitor therapy, and the patients either responded favorably or poorly to this treatment.
On the next page you can choose which cell phenotypes you want to focus on. Click one of the pre-defined phenotypes, or define a custom phenotype by indicating positive and negative markers from among the channels which were imaged.
We select five custom phenotypes. The first phenotype, for example, was defined by clicking the + beside CD3+, then clicking Add to selection. This generally indicates the T cells. The second phenotype is CD3+ CD4+, the markers of T helper cells. We also include: CD3+ CD8A+, CD3+ CD4+ FOXP3+, and CD20+ CD3-. We are ascertaining the rough profile of lymphocytes in the dataset.
The next page shows the cell population breakdown with respect to the phenotypes we've just selected. Each phenotype is shown with the fraction of cells expressing that phenotype across all samples, for example 54.02% are indicated as T cells.
In the grid, each pair of phenotypes is shown with the fraction of cells expressing both phenotypes. For example, the fraction of cells that are both CD3+ CD4+ FOXP3+ and CD3+ is 16.53%, the same as the fraction of cells that are CD3+ CD4+ FOXP3+, as expected since CD3+ is part of the signature of this phenotype (the T regulatory cells).
[!NOTE] :bar_chart: You could use this technique to make a standard heat map for assessment of clusters, by selecting all single-channel phenotypes. Depending on the size of the samples, since these metrics are computed live, this could take up to 1 minute per computed value, and sometimes longer.
To continue with a finer analysis, click one of the "tiles", either for one phenotype (the tiles on the left) or two phenotypes (the grid on the right).
We choose the tile at row CD3+ CD4+ FOXP3+ (Treg) and column CD3+ CD8A+ (Tc). The table below populates with the size of the population of cells expressing both signatures, broken down by sample. Note that in reality there are generally few cells expressing both of these two specific suites of markers, and the few cells occuring here are probably the result of an imperfect stain intensity dichotomization (thresholding, gating). So this tool can be used to do basic quality control in case some logical or illogical marker combinations are known in advance.
We also selected the single-phenotype tiles CD3+ CD4+ FOXP3+ and CD3+ CD8A.
Click on the column header CD3+ CD8A+ (it becomes underlined to indicate that it is selected). Then select the two cohorts by clicking one of the 1 values and one of the 2 values. A "verbalization" appears which states that the trend, according to a t-test, is that the fraction of Tc cells is increased about 1.5 times in the non-responder cohort compared to the responders, with statistical significance value p=0.1.
We click on column CD3+ CD4+ FOXP3+, in addition to the prior selection. A similar assessment appears, this time with respect to the ratio of the number of CD3+ CD8A+ (the first selection) to CD3+ CD4+ FOXP3+ (the second selection).
Let's focus our attention on one of the samples that exhibited a large fraction of Tc cells. Click 31RD.
The "virtual slide viewer" opens. Choose a few phenotypes, and the corresponding cells will become highlighted. The fraction and count of the cells for each phenotype are shown.
A UMAP dimensional reduction of the cell set across the whole data collection is available in this case. Click UMAP.
[!NOTE] :mag: You can zoom and pan the view using scroll and click-and-drag.
We spot a region that looks "saturated" with Tc cells. Select it by clicking and dragging the mouse while holding either the Ctrl key or (on Mac) CMD.
The new cell count for each phenotype is now shown, together with the new percentage, relative to the selection. In this case the Tc fraction approximately doubled, to 6996 cells (shown in green). This increase is assessed using the Fisher test (the entire contingency table is also shown, for reference). The test verifies that the increase is highly statistically significant in this case, as expected.
[!NOTE] By careful use of the selection tool, noting enrichments in each virtual region, you can account for most of the cell types present and hone the focus of study.
Let's see an example of quantification over samples that makes use of the spatial arrangement of cells.
Choose the phenotypes Naive cytoxic T cell and T helper cell antigen-experienced. Select the tile with row T helper cell antigen-experienced and column Naive cytoxic T cell, representing the pair of phenotypes.
In the column header that appears, click >. The spatial metrics dropdown appears. Click v to show the available metrics. Choose cell-to-cell proximity. After the metric is finished computing, click the column header cell-to-cell proximity and the two cohorts 1 and 2 to perform a univariate comparison.
This metric is the average number of Naive cytotoxic T cells appearing within a specified radius of given T helper antigen-experienced cells. It measures generally how common it is to find cells of one phenotype in close proximity to those of another phenotype. There are several other metrics available, of various degrees of statistical sophistication, many computed using the Squidpy package. These are explained in more detail in the API documentation.
[!NOTE] :clipboard: You can save results like this for later by copying the URL in the address bar. In fact, this result is highlighted on the study summary page. Try reproducing it by following the first link as shown below.
To support this project's semantic integrity goals, we designed a general data model and ontology for cell-resolved measurement studies, using a schema-authoring system we call the Application Data Interface (ADI) framework.
The schema is called scstudies and it is documented in detail here.
In our implementation, we sought to strike an effective balance between the completeness of annotation demanded by accurate record-keeping, on the one hand, and practical computational efficiency on the other. Much of the application is organized around a SQL database with a schema that conforms tightly to the formal scstudies data model, but we also make liberal use of derivative data artifacts to improve speed and performance. For example, a highly-compressed binary format is adopted for transmission of a given sample's cell-feature matrix.
Similarly, datasets that we have curated for uniform data import are stored in a simple tabular file format which does not generally support all the features of the scstudies model. This intermediary format is designed for ease of creation and it is not entirely formalized. For an example, see data_curation/.
The Python package spatialprofilingtoolbox is released on PyPI, so it can be installed with
python -m pip install spatialprofilingtoolbox
Installation makes several commands available in the shell. List them with spt:
$ spt
...
spt apiserver dump-schema
spt graphs create-specimen-graphs
spt graphs explore-classes
spt graphs extract
spt graphs finalize-graphs
spt graphs generate-graphs
spt graphs plot-importance-fractions
spt graphs plot-interactives
spt graphs prepare-graph-creation
spt graphs upload-importances
spt db collection
spt db delete-feature
spt db do-fractions-tests
spt db drop
spt db drop-ondemand-computations
spt db guess-channels-from-object-files
spt db interactive-uploader
spt db list-studies
spt db load-query
spt db retrieve-feature-matrices
spt db status
spt db upload-sync-small
spt ondemand cache-expressions-data-array
spt ondemand start
spt workflow aggregate-core-results
spt workflow configure
spt workflow core-job
spt workflow generate-run-information
spt workflow initialize
spt workflow merge-performance-reports
spt workflow report-on-logs
spt workflow report-run-configuration
spt workflow tail-logs
Each command will print documentation by providing the --help option.
Several commands are mainly for use internal to the application components.
Some others are TUIs (Terminal User Interfaces) meant to make common tasks, like uploading datasets or inspecting cache or metadata, more reliable.
spt db interactive-uploader is a TUI that automatically determines available data sources and targets after you have created or located source datasets (format: data_curation/). It looks for database configuration files named ~/.spt_db.config.*, checks the environment variable SPT_S3_BUCKET, and searches recursively for datasets in the current working directory named generated_artifacts. It presents available options and initiates the upload process.
Example usage is shown below.
The ETL (Extract/Transform/Load) process includes a number of data integrity checks and the creation of several intermediate data artifacts.
The SPT application is supported by a web API, which provides fine-grained access to specific components of a given dataset. The API is documented here.
See docs/maintenance.md.
For assistance setting up a deployment of the SPT application for your institution or business, write to us at nadeems@mskcc.org.
The application can be deployed in several ways:
© Nadeem Lab - SPT code is distributed under Apache 2.0 with Commons Clause license, and is available for non-commercial academic purposes.
FAQs
Toolbox for spatial analysis of single cell data.
We found that spatialprofilingtoolbox demonstrated a healthy version release cadence and project activity because the last version was released less than a year ago. It has 1 open source maintainer collaborating on the project.
Did you know?
Socket for GitHub automatically highlights issues in each pull request and monitors the health of all your open source dependencies. Discover the contents of your packages and block harmful activity before you install or update your dependencies.
Security News
In this segment of the Risky Business podcast, Feross Aboukhadijeh and Patrick Gray discuss the challenges of tracking malware discovered in open source softare.
Research
Security News
A threat actor's playbook for exploiting the npm ecosystem was exposed on the dark web, detailing how to build a blockchain-powered botnet.
Security News
NVD’s backlog surpasses 20,000 CVEs as analysis slows and NIST announces new system updates to address ongoing delays.