Accounting API

Package namecheap implements a client for the Namecheap API. In order to use this package you will need a Namecheap account and your API Token.

Package gotransip implements a client for the TransIP Rest API. This package is a complete implementation for communicating with the TransIP RestAPI. It covers resource calls available in the TransIP RestAPI Docs and it allows your project(s) to connect to the TransIP RestAPI easily. Using this package you can order, update and remove products from your TransIP account. As of version 6.0 this package is no longer compatible with TransIP SOAP API because the library is now organized around REST. The SOAP API library versions 5.* are now deprecated and will no longer receive future updates. The following example uses the transip demo token in order to call the api with the test repository. For more information about authenticating with your own credentials, see the Authentication section. If you want to tinker out with the api first without setting up your authentication, we defined a static DemoClientConfiguration. Which can be used to create a new client: Create a new client using a token: As tokens have a limited expiry time you can also request new tokens using the private key acquired from your transip control panel: We also implemented a PrivateKeyReader option, for users that want to store their key elsewhere, not on a filesystem but on X datastore: If you would like to keep a token between multiple client instantiations, you can provide the client with a token cache. If the file does not exist, it creates one for you As long as a provided TokenCache adheres to the following interface, the client's authenticator is able to use it. This means you can also provide your own token cacher: for example, one that caches to etcd All resource calls as can be seen on https://api.transip.nl/rest/docs.html have been grouped in the following repositories, these are subpackages under the gotransip package: Such a repository can be initialised with a client as follows: Each repository has a bunch methods you can use to call get/modify/update resources in that specific subpackage. For example, here we get a list of domains from a transip account:

Package ivs provides the API client, operations, and parameter types for Amazon Interactive Video Service. The Amazon Interactive Video Service (IVS) API is REST compatible, using a standard HTTP API and an Amazon Web Services EventBridge event stream for responses. JSON is used for both requests and responses, including errors. The API is an Amazon Web Services regional service. For a list of supported regions and Amazon IVS HTTPS service endpoints, see the Amazon IVS pagein the Amazon Web Services General Reference. All API request parameters and URLs are case sensitive. For a summary of notable documentation changes in each release, see Document History. Allowed Header Values Accept: application/json Accept-Encoding: gzip, deflate Content-Type: application/json Key Concepts Channel — Stores configuration data related to your live stream. You first create a channel and then use the channel’s stream key to start your live stream. Stream key — An identifier assigned by Amazon IVS when you create a channel, which is then used to authorize streaming. Treat the stream key like a secret, since it allows anyone to stream to the channel. Playback key pair — Video playback may be restricted using playback-authorization tokens, which use public-key encryption. A playback key pair is the public-private pair of keys used to sign and validate the playback-authorization token. Recording configuration — Stores configuration related to recording a live stream and where to store the recorded content. Multiple channels can reference the same recording configuration. Playback restriction policy — Restricts playback by countries and/or origin sites. For more information about your IVS live stream, also see Getting Started with IVS Low-Latency Streaming. A tag is a metadata label that you assign to an Amazon Web Services resource. A tag comprises a key and a value, both set by you. For example, you might set a tag as topic:nature to label a particular video category. See Best practices and strategies in Tagging Amazon Web Services Resources and Tag Editor for details, including restrictions that apply to tags and "Tag naming limits and requirements"; Amazon IVS has no service-specific constraints beyond what is documented there. Tags can help you identify and organize your Amazon Web Services resources. For example, you can use the same tag for different resources to indicate that they are related. You can also use tags to manage access (see Access Tags). The Amazon IVS API has these tag-related operations: TagResource, UntagResource, and ListTagsForResource. The following resources support tagging: Channels, Stream Keys, Playback Key Pairs, and Recording Configurations. At most 50 tags can be applied to a resource. Note the differences between these concepts: Authentication is about verifying identity. You need to be authenticated to sign Amazon IVS API requests. Authorization is about granting permissions. Your IAM roles need to have permissions for Amazon IVS API requests. In addition, authorization is needed to view Amazon IVS private channels. (Private channels are channels that are enabled for "playback authorization.") All Amazon IVS API requests must be authenticated with a signature. The Amazon Web Services Command-Line Interface (CLI) and Amazon IVS Player SDKs take care of signing the underlying API calls for you. However, if your application calls the Amazon IVS API directly, it’s your responsibility to sign the requests. You generate a signature using valid Amazon Web Services credentials that have permission to perform the requested action. For example, you must sign PutMetadata requests with a signature generated from a user account that has the ivs:PutMetadata permission. For more information: Authentication and generating signatures — See Authenticating Requests (Amazon Web Services Signature Version 4)in the Amazon Web Services General Reference. Managing Amazon IVS permissions — See Identity and Access Managementon the Security page of the Amazon IVS User Guide. Amazon Resource Names (ARNs) ARNs uniquely identify AWS resources. An ARN is required when you need to specify a resource unambiguously across all of AWS, such as in IAM policies and API calls. For more information, see Amazon Resource Namesin the AWS General Reference.

Package vpclattice provides the API client, operations, and parameter types for Amazon VPC Lattice. Amazon VPC Lattice is a fully managed application networking service that you use to connect, secure, and monitor all of your services across multiple accounts and virtual private clouds (VPCs). Amazon VPC Lattice interconnects your microservices and legacy services within a logical boundary, so that you can discover and manage them more efficiently. For more information, see the Amazon VPC Lattice User Guide

Package dnspod implements a client for the dnspod API. In order to use this package you will need a dnspod account and your API Token.

Package metadata provides access to Google Compute Engine (GCE) metadata and API service accounts. This package is a wrapper around the GCE metadata service, as documented at https://developers.google.com/compute/docs/metadata.

Package dnspod implements a client for the dnspod API. In order to use this package you will need a dnspod account and your API Token.

Package loggregator provides clients to send data to the Loggregator v1 and v2 API. The v2 API distinguishes itself from the v1 API on three counts: 1) it uses gRPC, 2) it uses a streaming connection, and 3) it supports batching to improve performance. The code here provides a generic interface into the two APIs. Clients who prefer more fine grained control may generate their own code using the protobuf and gRPC service definitions found at: github.com/cloudfoundry/loggregator-api. Note that on account of the client using batching wherein multiple messages may be sent at once, there is no meaningful error return value available. Each of the methods below make a best-effort at message delivery. Even in the event of a failed send, the client will not block callers. In general, use IngressClient for communicating with Loggregator's v2 API. For Loggregator's v1 API, see v1/client.go.

Package detective provides the API client, operations, and parameter types for Amazon Detective. Detective uses machine learning and purpose-built visualizations to help you to analyze and investigate security issues across your Amazon Web Services (Amazon Web Services) workloads. Detective automatically extracts time-based events such as login attempts, API calls, and network traffic from CloudTrail and Amazon Virtual Private Cloud (Amazon VPC) flow logs. It also extracts findings detected by Amazon GuardDuty. The Detective API primarily supports the creation and management of behavior graphs. A behavior graph contains the extracted data from a set of member accounts, and is created and managed by an administrator account. To add a member account to the behavior graph, the administrator account sends an invitation to the account. When the account accepts the invitation, it becomes a member account in the behavior graph. Detective is also integrated with Organizations. The organization management account designates the Detective administrator account for the organization. That account becomes the administrator account for the organization behavior graph. The Detective administrator account is also the delegated administrator account for Detective in Organizations. The Detective administrator account can enable any organization account as a member account in the organization behavior graph. The organization accounts do not receive invitations. The Detective administrator account can also invite other accounts to the organization behavior graph. Every behavior graph is specific to a Region. You can only use the API to manage behavior graphs that belong to the Region that is associated with the currently selected endpoint. The administrator account for a behavior graph can use the Detective API to do the following: Enable and disable Detective. Enabling Detective creates a new behavior graph. View the list of member accounts in a behavior graph. Add member accounts to a behavior graph. Remove member accounts from a behavior graph. Apply tags to a behavior graph. The organization management account can use the Detective API to select the delegated administrator for Detective. The Detective administrator account for an organization can use the Detective API to do the following: Perform all of the functions of an administrator account. Determine whether to automatically enable new organization accounts as member accounts in the organization behavior graph. An invited member account can use the Detective API to do the following: View the list of behavior graphs that they are invited to. Accept an invitation to contribute to a behavior graph. Decline an invitation to contribute to a behavior graph. Remove their account from a behavior graph. All API actions are logged as CloudTrail events. See Logging Detective API Calls with CloudTrail. We replaced the term "master account" with the term "administrator account". An administrator account is used to centrally manage multiple accounts. In the case of Detective, the administrator account manages the accounts in their behavior graph.

Package loggregator provides clients to send data to the Loggregator v1 and v2 API. The v2 API distinguishes itself from the v1 API on three counts: 1) it uses gRPC, 2) it uses a streaming connection, and 3) it supports batching to improve performance. The code here provides a generic interface into the two APIs. Clients who prefer more fine grained control may generate their own code using the protobuf and gRPC service definitions found at: github.com/cloudfoundry/loggregator-api. Note that on account of the client using batching wherein multiple messages may be sent at once, there is no meaningful error return value available. Each of the methods below make a best-effort at message delivery. Even in the event of a failed send, the client will not block callers. In general, use IngressClient for communicating with Loggregator's v2 API. For Loggregator's v1 API, see v1/client.go.

Package anaconda provides structs and functions for accessing version 1.1 of the Twitter API. Successful API queries return native Go structs that can be used immediately, with no need for type assertions. If you already have the access token (and secret) for your user (Twitter provides this for your own account on the developer portal), creating the client is simple: Executing queries on an authenticated TwitterApi struct is simple. Certain endpoints allow separate optional parameter; if desired, these can be passed as the final parameter. Anaconda implements most of the endpoints defined in the Twitter API documentation: https://dev.twitter.com/docs/api/1.1. For clarity, in most cases, the function name is simply the name of the HTTP method and the endpoint (e.g., the endpoint `GET /friendships/incoming` is provided by the function `GetFriendshipsIncoming`). In a few cases, a shortened form has been chosen to make life easier (for example, retweeting is simply the function `Retweet`) More detailed information about the behavior of each particular endpoint can be found at the official Twitter API documentation.

Package sdk is the official Flipt Go SDK. The SDK exposes the various RPC for interfacing with a remote Flipt instance. Both HTTP and gRPC protocols are supported via this unified Go API. The main entrypoint within this package is New, which takes an instance of Transport and returns an instance of SDK. Transport implementations can be found in the following sub-packages: The following is an example of creating and instance of the SDK using the gRPC transport. The following is an example of creating an instance of the SDK using the HTTP transport. The remote procedure calls mades by this SDK are authenticated via a ClientAuthenticationProvider implementation. This can be supplied to New via the WithAuthenticationProvider option. Note that each of these methods will only work if the target Flipt server instance has the authentication method enabled. Currently, there are three implementations: - StaticTokenAuthenticationProvider(https://www.flipt.io/docs/authentication/methods#static-token): This provider sets a static Flipt client token via the Authentication header with the Bearer scheme. - JWTAuthenticationProvider(https://www.flipt.io/docs/authentication/methods#json-web-tokens): This provider sets a pre-generated JSON web-token via the Authentication header with the JWT scheme. - KubernetesAuthenticationProvider(https://www.flipt.io/docs/authentication/methods#kubernetes): This automatically uses the service account token on the host and exchanges it with Flipt for a Flipt client token credential. The credential is then used to authenticate requests, again via the Authentication header and the Bearer scheme. It ensures that the client token is not-expired and requests fresh tokens automatically without intervention. Use this method to automatically authenticate your application with a Flipt deployed into the same Kubernetes cluster. The Flipt SDK is split into four sections Flipt, Auth, Meta, and Evaluation. Each of which provides access to different parts of the Flipt system. The Flipt service is the core Flipt API service. This service provides access to the Flipt resource CRUD APIs. Flipt resources can be accessed and managed directly. The Evaluation service provides access to the Flipt evaluation APIs. The Evaluation service provides three methods for evaluating a flag for a given entity: Boolean, Variant, and Batch. The Boolean method returns a response containing a boolean value indicating whether or not the flag is enabled for the given entity. Learn more about the Boolean flag type: <https://www.flipt.io/docs/concepts#boolean-flags> The Variant method returns a response containing the variant key for the given entity. Learn more about the Variant flag type: <https://www.flipt.io/docs/concepts#variant-flags> The Batch method returns a response containing the evaluation results for a batch of requests. These requests can be for a mix of boolean and variant flags.

Package metadata provides access to Google Compute Engine (GCE) metadata and API service accounts. This package is a wrapper around the GCE metadata service, as documented at https://developers.google.com/compute/docs/metadata.

Package loggregator provides clients to send data to the Loggregator v1 and v2 API. The v2 API distinguishes itself from the v1 API on three counts: 1) it uses gRPC, 2) it uses a streaming connection, and 3) it supports batching to improve performance. The code here provides a generic interface into the two APIs. Clients who prefer more fine grained control may generate their own code using the protobuf and gRPC service definitions found at: github.com/cloudfoundry/loggregator-api. Note that on account of the client using batching wherein multiple messages may be sent at once, there is no meaningful error return value available. Each of the methods below make a best-effort at message delivery. Even in the event of a failed send, the client will not block callers. In general, use IngressClient for communicating with Loggregator's v2 API. For Loggregator's v1 API, see v1/client.go.

Package feegrant provides functionality for authorizing the payment of transaction fees from one account (key) to another account (key). Effectively, this allows for a user to pay fees using the balance of an account different from their own. Example use cases would be allowing a key on a device to pay for fees using a master wallet, or a third party service allowing users to pay for transactions without ever really holding their own coins. This package provides ways for specifying fee allowances such that authorizing fee payment to another account can be done with clear and safe restrictions. A user would authorize granting fee payment to another user using MsgGrantAllowance and revoke that delegation using MsgRevokeAllowance. In both cases, Granter is the one who is authorizing fee payment and Grantee is the one who is receiving the fee payment authorization. So grantee would correspond to the one who is signing a transaction and the granter would be the address that pays the fees. The fee allowance that a grantee receives is specified by an implementation of the FeeAllowance interface. Two FeeAllowance implementations are provided in this package: BasicAllowance and PeriodicAllowance. Package feegrant is a reverse proxy. It translates gRPC into RESTful JSON APIs.

Package bigtable is an API to Google Cloud Bigtable. See https://cloud.google.com/bigtable/docs/ for general product documentation. See https://godoc.org/cloud.google.com/go for authentication, timeouts, connection pooling and similar aspects of this package. Use NewClient or NewAdminClient to create a client that can be used to access the data or admin APIs respectively. Both require credentials that have permission to access the Cloud Bigtable API. If your program is run on Google App Engine or Google Compute Engine, using the Application Default Credentials (https://developers.google.com/accounts/docs/application-default-credentials) is the simplest option. Those credentials will be used by default when NewClient or NewAdminClient are called. To use alternate credentials, pass them to NewClient or NewAdminClient using option.WithTokenSource. For instance, you can use service account credentials by visiting https://cloud.google.com/console/project/MYPROJECT/apiui/credential, creating a new OAuth "Client ID", storing the JSON key somewhere accessible, and writing Here, `google` means the golang.org/x/oauth2/google package and `option` means the google.golang.org/api/option package. The principal way to read from a Bigtable is to use the ReadRows method on *Table. A RowRange specifies a contiguous portion of a table. A Filter may be provided through RowFilter to limit or transform the data that is returned. To read a single row, use the ReadRow helper method. This API exposes two distinct forms of writing to a Bigtable: a Mutation and a ReadModifyWrite. The former expresses idempotent operations. The latter expresses non-idempotent operations and returns the new values of updated cells. These operations are performed by creating a Mutation or ReadModifyWrite (with NewMutation or NewReadModifyWrite), building up one or more operations on that, and then using the Apply or ApplyReadModifyWrite methods on a Table. For instance, to set a couple of cells in a table, To increment an encoded value in one cell, If a read or write operation encounters a transient error it will be retried until a successful response, an unretryable error or the context deadline is reached. Non-idempotent writes (where the timestamp is set to ServerTime) will not be retried. In the case of ReadRows, retried calls will not re-scan rows that have already been processed.

Package bigtable is an API to Google Cloud Bigtable. See https://cloud.google.com/bigtable/docs/ for general product documentation. See https://godoc.org/cloud.google.com/go for authentication, timeouts, connection pooling and similar aspects of this package. Use NewClient or NewAdminClient to create a client that can be used to access the data or admin APIs respectively. Both require credentials that have permission to access the Cloud Bigtable API. If your program is run on Google App Engine or Google Compute Engine, using the Application Default Credentials (https://developers.google.com/accounts/docs/application-default-credentials) is the simplest option. Those credentials will be used by default when NewClient or NewAdminClient are called. To use alternate credentials, pass them to NewClient or NewAdminClient using option.WithTokenSource. For instance, you can use service account credentials by visiting https://cloud.google.com/console/project/MYPROJECT/apiui/credential, creating a new OAuth "Client ID", storing the JSON key somewhere accessible, and writing Here, `google` means the golang.org/x/oauth2/google package and `option` means the google.golang.org/api/option package. The principal way to read from a Bigtable is to use the ReadRows method on *Table. A RowRange specifies a contiguous portion of a table. A Filter may be provided through RowFilter to limit or transform the data that is returned. To read a single row, use the ReadRow helper method. This API exposes two distinct forms of writing to a Bigtable: a Mutation and a ReadModifyWrite. The former expresses idempotent operations. The latter expresses non-idempotent operations and returns the new values of updated cells. These operations are performed by creating a Mutation or ReadModifyWrite (with NewMutation or NewReadModifyWrite), building up one or more operations on that, and then using the Apply or ApplyReadModifyWrite methods on a Table. For instance, to set a couple of cells in a table, To increment an encoded value in one cell, If a read or write operation encounters a transient error it will be retried until a successful response, an unretryable error or the context deadline is reached. Non-idempotent writes (where the timestamp is set to ServerTime) will not be retried. In the case of ReadRows, retried calls will not re-scan rows that have already been processed.

Package logging contains a Stackdriver Logging client suitable for writing logs. For reading logs, and working with sinks, metrics and monitored resources, see package cloud.google.com/go/logging/logadmin. This client uses Logging API v2. See https://cloud.google.com/logging/docs/api/v2/ for an introduction to the API. Note: This package is in beta. Some backwards-incompatible changes may occur. Use a Client to interact with the Stackdriver Logging API. For most use cases, you'll want to add log entries to a buffer to be periodically flushed (automatically and asynchronously) to the Stackdriver Logging service. You should call Client.Close before your program exits to flush any buffered log entries to the Stackdriver Logging service. For critical errors, you may want to send your log entries immediately. LogSync is slow and will block until the log entry has been sent, so it is not recommended for normal use. An entry payload can be a string, as in the examples above. It can also be any value that can be marshaled to a JSON object, like a map[string]interface{} or a struct: If you have a []byte of JSON, wrap it in json.RawMessage: You may want use a standard log.Logger in your program. An Entry may have one of a number of severity levels associated with it. You can view Stackdriver logs for projects at https://console.cloud.google.com/logs/viewer. Use the dropdown at the top left. When running from a Google Cloud Platform VM, select "GCE VM Instance". Otherwise, select "Google Project" and then the project ID. Logs for organizations, folders and billing accounts can be viewed on the command line with the "gcloud logging read" command. To group all the log entries written during a single HTTP request, create two Loggers, a "parent" and a "child," with different log IDs. Both should be in the same project, and have the same MonitoredResouce type and labels. - Parent entries must have HTTPRequest.Request populated. (Strictly speaking, only the URL is necessary.) - A child entry's timestamp must be within the time interval covered by the parent request (i.e., older than parent.Timestamp, and newer than parent.Timestamp - parent.HTTPRequest.Latency, assuming the parent timestamp marks the end of the request. - The trace field must be populated in all of the entries and match exactly. You should observe the child log entries grouped under the parent on the console. The parent entry will not inherit the severity of its children; you must update the parent severity yourself.

Package twilio provides support for interacting with Twilio REST API This example shows the usage of twilio package. You can get your AccountSid and AuthToken on Account Dashboard page.

Package metadata provides access to Google Compute Engine (GCE) metadata and API service accounts. This package is a wrapper around the GCE metadata service, as documented at https://developers.google.com/compute/docs/metadata.

Package logging contains a Stackdriver Logging client suitable for writing logs. For reading logs, and working with sinks, metrics and monitored resources, see package cloud.google.com/go/logging/logadmin. This client uses Logging API v2. See https://cloud.google.com/logging/docs/api/v2/ for an introduction to the API. Note: This package is in beta. Some backwards-incompatible changes may occur. Use a Client to interact with the Stackdriver Logging API. For most use cases, you'll want to add log entries to a buffer to be periodically flushed (automatically and asynchronously) to the Stackdriver Logging service. You should call Client.Close before your program exits to flush any buffered log entries to the Stackdriver Logging service. For critical errors, you may want to send your log entries immediately. LogSync is slow and will block until the log entry has been sent, so it is not recommended for normal use. An entry payload can be a string, as in the examples above. It can also be any value that can be marshaled to a JSON object, like a map[string]interface{} or a struct: If you have a []byte of JSON, wrap it in json.RawMessage: You may want use a standard log.Logger in your program. An Entry may have one of a number of severity levels associated with it. You can view Stackdriver logs for projects at https://console.cloud.google.com/logs/viewer. Use the dropdown at the top left. When running from a Google Cloud Platform VM, select "GCE VM Instance". Otherwise, select "Google Project" and then the project ID. Logs for organizations, folders and billing accounts can be viewed on the command line with the "gcloud logging read" command. To group all the log entries written during a single HTTP request, create two Loggers, a "parent" and a "child," with different log IDs. Both should be in the same project, and have the same MonitoredResouce type and labels. - Parent entries must have HTTPRequest.Request populated. (Strictly speaking, only the URL is necessary.) - A child entry's timestamp must be within the time interval covered by the parent request (i.e., older than parent.Timestamp, and newer than parent.Timestamp - parent.HTTPRequest.Latency, assuming the parent timestamp marks the end of the request. - The trace field must be populated in all of the entries and match exactly. You should observe the child log entries grouped under the parent on the console. The parent entry will not inherit the severity of its children; you must update the parent severity yourself.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. - UTF-8 support - Choice of measurement unit, page format and margins - Page header and footer management - Automatic page breaks, line breaks, and text justification - Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images - Colors, gradients and alpha channel transparency - Outline bookmarks - Internal and external links - TrueType, Type1 and encoding support - Page compression - Lines, Bézier curves, arcs, and ellipses - Rotation, scaling, skewing, translation, and mirroring - Clipping - Document protection - Layers - Templates - Barcodes - Charting facility - Import PDFs as templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. gofpdf supports UTF-8 TrueType fonts and “right-to-left” languages. Note that Chinese, Japanese, and Korean characters may not be included in many general purpose fonts. For these languages, a specialized font (for example, NotoSansSC for simplified Chinese) can be used. Also, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. This repository will not be maintained, at least for some unknown duration. But it is hoped that gofpdf has a bright future in the open source world. Due to Go’s promise of compatibility, gofpdf should continue to function without modification for a longer time than would be the case with many other languages. Forks should be based on the last viable commit. Tools such as active-forks can be used to select a fork that looks promising for your needs. If a particular fork looks like it has taken the lead in attracting followers, this README will be updated to point people in that direction. The efforts of all contributors to this project have been deeply appreciated. Best wishes to all of you. If you currently use the $GOPATH scheme, install the package with the following command. To test the installation, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running go test ./... is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you’ll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory and if the third argument to ComparePDFFiles() in internal/example/example.go is true. (By default it is false.) The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). You should use AddUTF8Font() or AddUTF8FontFromBytes() to add a TrueType UTF-8 encoded font. Use RTL() and LTR() methods switch between “right-to-left” and “left-to-right” mode. In order to use a different non-UTF-8 TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run “go build”. This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include Google Fonts and DejaVu Fonts. The draw2d package is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the contrib directory. Here are guidelines for making submissions. Your change should - be compatible with the MIT License - be properly documented - be formatted with go fmt - include an example in fpdf_test.go if appropriate - conform to the standards of golint and go vet, that is, golint . and go vet . should not generate any warnings - not diminish test coverage Pull requests are the preferred means of accepting your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package’s code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Bruno Michel has provided valuable assistance with the code. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image’s extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Dan Meyers added support for embedded JavaScript. David Fish added a generic alias-replacement function to enable, among other things, table of contents functionality. Andy Bakun identified and corrected a problem in which the internal catalogs were not sorted stably. Paul Montag added encoding and decoding functionality for templates, including images that are embedded in templates; this allows templates to be stored independently of gofpdf. Paul also added support for page boxes used in printing PDF documents. Wojciech Matusiak added supported for word spacing. Artem Korotkiy added support of UTF-8 fonts. Dave Barnes added support for imported objects and templates. Brigham Thompson added support for rounded rectangles. Joe Westcott added underline functionality and optimized image storage. Benoit KUGLER contributed support for rectangles with corners of unequal radius, modification times, and for file attachments and annotations. - Remove all legacy code page font support; use UTF-8 exclusively - Improve test coverage as reported by the coverage tool. Example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers • Templates • Barcodes gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. In particular, languages that require more than one code page such as Chinese, Japanese, and Arabic are not currently supported. This is explained in issue 109. However, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test ./..." is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory. The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. The draw2d package (https://github.com/llgcode/draw2d) is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the `contrib` directory. Here are guidelines for making submissions. Your change should • be compatible with the MIT License • be properly documented • be formatted with `go fmt` • include an example in fpdf_test.go if appropriate • conform to the standards of golint (https://github.com/golang/lint) and go vet (https://godoc.org/golang.org/x/tools/cmd/vet), that is, `golint .` and `go vet .` should not generate any warnings • not diminish test coverage (https://blog.golang.org/cover) Pull requests (https://help.github.com/articles/using-pull-requests/) work nicely as a means of contributing your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package's code and documentation are closely derived from the FPDF library (http://www.fpdf.org/) created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Bruno Michel has provided valuable assistance with the code. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool. This example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. - UTF-8 support - Choice of measurement unit, page format and margins - Page header and footer management - Automatic page breaks, line breaks, and text justification - Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images - Colors, gradients and alpha channel transparency - Outline bookmarks - Internal and external links - TrueType, Type1 and encoding support - Page compression - Lines, Bézier curves, arcs, and ellipses - Rotation, scaling, skewing, translation, and mirroring - Clipping - Document protection - Layers - Templates - Barcodes - Charting facility - Import PDFs as templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. gofpdf supports UTF-8 TrueType fonts and “right-to-left” languages. Note that Chinese, Japanese, and Korean characters may not be included in many general purpose fonts. For these languages, a specialized font (for example, NotoSansSC for simplified Chinese) can be used. Also, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. This repository will not be maintained, at least for some unknown duration. But it is hoped that gofpdf has a bright future in the open source world. Due to Go’s promise of compatibility, gofpdf should continue to function without modification for a longer time than would be the case with many other languages. Forks should be based on the last viable commit. Tools such as active-forks can be used to select a fork that looks promising for your needs. If a particular fork looks like it has taken the lead in attracting followers, this README will be updated to point people in that direction. The efforts of all contributors to this project have been deeply appreciated. Best wishes to all of you. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running go test ./... is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you’ll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory and if the third argument to ComparePDFFiles() in internal/example/example.go is true. (By default it is false.) The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). You should use AddUTF8Font() or AddUTF8FontFromBytes() to add a TrueType UTF-8 encoded font. Use RTL() and LTR() methods switch between “right-to-left” and “left-to-right” mode. In order to use a different non-UTF-8 TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run “go build”. This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include Google Fonts and DejaVu Fonts. The draw2d package is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the contrib directory. Here are guidelines for making submissions. Your change should - be compatible with the MIT License - be properly documented - be formatted with go fmt - include an example in fpdf_test.go if appropriate - conform to the standards of golint and go vet, that is, golint . and go vet . should not generate any warnings - not diminish test coverage Pull requests are the preferred means of accepting your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package’s code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Bruno Michel has provided valuable assistance with the code. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image’s extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Dan Meyers added support for embedded JavaScript. David Fish added a generic alias-replacement function to enable, among other things, table of contents functionality. Andy Bakun identified and corrected a problem in which the internal catalogs were not sorted stably. Paul Montag added encoding and decoding functionality for templates, including images that are embedded in templates; this allows templates to be stored independently of gofpdf. Paul also added support for page boxes used in printing PDF documents. Wojciech Matusiak added supported for word spacing. Artem Korotkiy added support of UTF-8 fonts. Dave Barnes added support for imported objects and templates. Brigham Thompson added support for rounded rectangles. Joe Westcott added underline functionality and optimized image storage. Benoit KUGLER contributed support for rectangles with corners of unequal radius, modification times, and for file attachments and annotations. - Remove all legacy code page font support; use UTF-8 exclusively - Improve test coverage as reported by the coverage tool. Example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. • Choice of measurement unit, page format and margins • Page header and footer management • Automatic page breaks, line breaks, and text justification • Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images • Colors, gradients and alpha channel transparency • Outline bookmarks • Internal and external links • TrueType, Type1 and encoding support • Page compression • Lines, Bézier curves, arcs, and ellipses • Rotation, scaling, skewing, translation, and mirroring • Clipping • Document protection • Layers • Templates • Barcodes gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. Like FPDF version 1.7, from which gofpdf is derived, this package does not yet support UTF-8 fonts. In particular, languages that require more than one code page such as Chinese, Japanese, and Arabic are not currently supported. This is explained in issue 109. However, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running "go test ./..." is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you'll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory. The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). In order to use a different TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run "go build". This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include http://www.google.com/fonts/ and http://dejavu-fonts.org/. The draw2d package (https://github.com/llgcode/draw2d) is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the `contrib` directory. Here are guidelines for making submissions. Your change should • be compatible with the MIT License • be properly documented • be formatted with `go fmt` • include an example in fpdf_test.go if appropriate • conform to the standards of golint (https://github.com/golang/lint) and go vet (https://godoc.org/golang.org/x/tools/cmd/vet), that is, `golint .` and `go vet .` should not generate any warnings • not diminish test coverage (https://blog.golang.org/cover) Pull requests (https://help.github.com/articles/using-pull-requests/) work nicely as a means of contributing your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package's code and documentation are closely derived from the FPDF library (http://www.fpdf.org/) created by Olivier Plathey, and a number of font and image resources are copied directly from it. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image's extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Bruno Michel has provided valuable assistance with the code. • Handle UTF-8 source text natively. Until then, automatic translation of UTF-8 runes to code page bytes is provided. • Improve test coverage as reported by the coverage tool. This example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

Package kms provides the client and types for making API requests to AWS Key Management Service. AWS Key Management Service (AWS KMS) is an encryption and key management web service. This guide describes the AWS KMS operations that you can call programmatically. For general information about AWS KMS, see the AWS Key Management Service Developer Guide (http://docs.aws.amazon.com/kms/latest/developerguide/). AWS provides SDKs that consist of libraries and sample code for various programming languages and platforms (Java, Ruby, .Net, iOS, Android, etc.). The SDKs provide a convenient way to create programmatic access to AWS KMS and other AWS services. For example, the SDKs take care of tasks such as signing requests (see below), managing errors, and retrying requests automatically. For more information about the AWS SDKs, including how to download and install them, see Tools for Amazon Web Services (http://aws.amazon.com/tools/). We recommend that you use the AWS SDKs to make programmatic API calls to AWS KMS. Clients must support TLS (Transport Layer Security) 1.0. We recommend TLS 1.2. Clients must also support cipher suites with Perfect Forward Secrecy (PFS) such as Ephemeral Diffie-Hellman (DHE) or Elliptic Curve Ephemeral Diffie-Hellman (ECDHE). Most modern systems such as Java 7 and later support these modes. Requests must be signed by using an access key ID and a secret access key. We strongly recommend that you do not use your AWS account (root) access key ID and secret key for everyday work with AWS KMS. Instead, use the access key ID and secret access key for an IAM user, or you can use the AWS Security Token Service to generate temporary security credentials that you can use to sign requests. All AWS KMS operations require Signature Version 4 (http://docs.aws.amazon.com/general/latest/gr/signature-version-4.html). AWS KMS supports AWS CloudTrail, a service that logs AWS API calls and related events for your AWS account and delivers them to an Amazon S3 bucket that you specify. By using the information collected by CloudTrail, you can determine what requests were made to AWS KMS, who made the request, when it was made, and so on. To learn more about CloudTrail, including how to turn it on and find your log files, see the AWS CloudTrail User Guide (http://docs.aws.amazon.com/awscloudtrail/latest/userguide/). For more information about credentials and request signing, see the following: AWS Security Credentials (http://docs.aws.amazon.com/general/latest/gr/aws-security-credentials.html) This topic provides general information about the types of credentials used for accessing AWS. Temporary Security Credentials (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp.html) This section of the IAM User Guide describes how to create and use temporary security credentials. Signature Version 4 Signing Process (http://docs.aws.amazon.com/general/latest/gr/signature-version-4.html) This set of topics walks you through the process of signing a request using an access key ID and a secret access key. Of the APIs discussed in this guide, the following will prove the most useful for most applications. You will likely perform actions other than these, such as creating keys and assigning policies, by using the console. Encrypt Decrypt GenerateDataKey GenerateDataKeyWithoutPlaintext See https://docs.aws.amazon.com/goto/WebAPI/kms-2014-11-01 for more information on this service. See kms package documentation for more information. https://docs.aws.amazon.com/sdk-for-go/api/service/kms/ To AWS Key Management Service with the SDK use the New function to create a new service client. With that client you can make API requests to the service. These clients are safe to use concurrently. See the SDK's documentation for more information on how to use the SDK. https://docs.aws.amazon.com/sdk-for-go/api/ See aws.Config documentation for more information on configuring SDK clients. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config See the AWS Key Management Service client KMS for more information on creating client for this service. https://docs.aws.amazon.com/sdk-for-go/api/service/kms/#New

Package supportapp provides the API client, operations, and parameter types for AWS Support App. You can use the Amazon Web Services Support App in Slack API to manage your support cases in Slack for your Amazon Web Services account. After you configure your Slack workspace and channel with the Amazon Web Services Support App, you can perform the following tasks directly in your Slack channel: Create, search, update, and resolve your support cases Request service quota increases for your account Invite Amazon Web Services Support agents to your channel so that you can chat directly about your support cases For more information about how to perform these actions in Slack, see the following documentation in the Amazon Web Services Support User Guide: Amazon Web Services Support App in Slack Joining a live chat session with Amazon Web Services Support Requesting service quota increases Amazon Web Services Support App commands in Slack You can also use the Amazon Web Services Management Console instead of the Amazon Web Services Support App API to manage your Slack configurations. For more information, see Authorize a Slack workspace to enable the Amazon Web Services Support App. You must have a Business or Enterprise Support plan to use the Amazon Web Services Support App API. For more information about the Amazon Web Services Support App endpoints, see the Amazon Web Services Support App in Slack endpointsin the Amazon Web Services General Reference.

Package opsworkscm provides the API client, operations, and parameter types for AWS OpsWorks CM. AWS OpsWorks for configuration management (CM) is a service that runs and manages configuration management servers. You can use AWS OpsWorks CM to create and manage AWS OpsWorks for Chef Automate and AWS OpsWorks for Puppet Enterprise servers, and add or remove nodes for the servers to manage. Glossary of terms Server: A configuration management server that can be highly-available. The configuration management server runs on an Amazon Elastic Compute Cloud (EC2) instance, and may use various other AWS services, such as Amazon Relational Database Service (RDS) and Elastic Load Balancing. A server is a generic abstraction over the configuration manager that you want to use, much like Amazon RDS. In AWS OpsWorks CM, you do not start or stop servers. After you create servers, they continue to run until they are deleted. Engine: The engine is the specific configuration manager that you want to use. Valid values in this release include ChefAutomate and Puppet . Backup: This is an application-level backup of the data that the configuration manager stores. AWS OpsWorks CM creates an S3 bucket for backups when you launch the first server. A backup maintains a snapshot of a server's configuration-related attributes at the time the backup starts. Events: Events are always related to a server. Events are written during server creation, when health checks run, when backups are created, when system maintenance is performed, etc. When you delete a server, the server's events are also deleted. Account attributes: Every account has attributes that are assigned in the AWS OpsWorks CM database. These attributes store information about configuration limits (servers, backups, etc.) and your customer account. AWS OpsWorks CM supports the following endpoints, all HTTPS. You must connect to one of the following endpoints. Your servers can only be accessed or managed within the endpoint in which they are created. opsworks-cm.us-east-1.amazonaws.com opsworks-cm.us-east-2.amazonaws.com opsworks-cm.us-west-1.amazonaws.com opsworks-cm.us-west-2.amazonaws.com opsworks-cm.ap-northeast-1.amazonaws.com opsworks-cm.ap-southeast-1.amazonaws.com opsworks-cm.ap-southeast-2.amazonaws.com opsworks-cm.eu-central-1.amazonaws.com opsworks-cm.eu-west-1.amazonaws.com For more information, see AWS OpsWorks endpoints and quotas in the AWS General Reference. All API operations allow for five requests per second with a burst of 10 requests per second.

Package migrationhubconfig provides the API client, operations, and parameter types for AWS Migration Hub Config. The AWS Migration Hub home region APIs are available specifically for working with your Migration Hub home region. You can use these APIs to determine a home region, as well as to create and work with controls that describe the home region. You must make API calls for write actions (create, notify, associate, disassociate, import, or put) while in your home region, or a HomeRegionNotSetException error is returned. API calls for read actions (list, describe, stop, and delete) are permitted outside of your home region. If you call a write API outside the home region, an InvalidInputException is returned. You can call GetHomeRegion action to obtain the account's Migration Hub home region. For specific API usage, see the sections that follow in this AWS Migration Hub Home Region API reference.

Package sts provides the client and types for making API requests to AWS Security Token Service. The AWS Security Token Service (STS) is a web service that enables you to request temporary, limited-privilege credentials for AWS Identity and Access Management (IAM) users or for users that you authenticate (federated users). This guide provides descriptions of the STS API. For more detailed information about using this service, go to Temporary Security Credentials (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp.html). As an alternative to using the API, you can use one of the AWS SDKs, which consist of libraries and sample code for various programming languages and platforms (Java, Ruby, .NET, iOS, Android, etc.). The SDKs provide a convenient way to create programmatic access to STS. For example, the SDKs take care of cryptographically signing requests, managing errors, and retrying requests automatically. For information about the AWS SDKs, including how to download and install them, see the Tools for Amazon Web Services page (http://aws.amazon.com/tools/). For information about setting up signatures and authorization through the API, go to Signing AWS API Requests (http://docs.aws.amazon.com/general/latest/gr/signing_aws_api_requests.html) in the AWS General Reference. For general information about the Query API, go to Making Query Requests (http://docs.aws.amazon.com/IAM/latest/UserGuide/IAM_UsingQueryAPI.html) in Using IAM. For information about using security tokens with other AWS products, go to AWS Services That Work with IAM (http://docs.aws.amazon.com/IAM/latest/UserGuide/reference_aws-services-that-work-with-iam.html) in the IAM User Guide. If you're new to AWS and need additional technical information about a specific AWS product, you can find the product's technical documentation at http://aws.amazon.com/documentation/ (http://aws.amazon.com/documentation/). The AWS Security Token Service (STS) has a default endpoint of https://sts.amazonaws.com that maps to the US East (N. Virginia) region. Additional regions are available and are activated by default. For more information, see Activating and Deactivating AWS STS in an AWS Region (http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html) in the IAM User Guide. For information about STS endpoints, see Regions and Endpoints (http://docs.aws.amazon.com/general/latest/gr/rande.html#sts_region) in the AWS General Reference. STS supports AWS CloudTrail, which is a service that records AWS calls for your AWS account and delivers log files to an Amazon S3 bucket. By using information collected by CloudTrail, you can determine what requests were successfully made to STS, who made the request, when it was made, and so on. To learn more about CloudTrail, including how to turn it on and find your log files, see the AWS CloudTrail User Guide (http://docs.aws.amazon.com/awscloudtrail/latest/userguide/what_is_cloud_trail_top_level.html). See https://docs.aws.amazon.com/goto/WebAPI/sts-2011-06-15 for more information on this service. See sts package documentation for more information. https://docs.aws.amazon.com/sdk-for-go/api/service/sts/ To AWS Security Token Service with the SDK use the New function to create a new service client. With that client you can make API requests to the service. These clients are safe to use concurrently. See the SDK's documentation for more information on how to use the SDK. https://docs.aws.amazon.com/sdk-for-go/api/ See aws.Config documentation for more information on configuring SDK clients. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config See the AWS Security Token Service client STS for more information on creating client for this service. https://docs.aws.amazon.com/sdk-for-go/api/service/sts/#New

Package billingconductor provides the API client, operations, and parameter types for AWSBillingConductor. Amazon Web Services Billing Conductor is a fully managed service that you can use to customize a proformaversion of your billing data each month, to accurately show or chargeback your end customers. Amazon Web Services Billing Conductor doesn't change the way you're billed by Amazon Web Services each month by design. Instead, it provides you with a mechanism to configure, generate, and display rates to certain customers over a given billing period. You can also analyze the difference between the rates you apply to your accounting groupings relative to your actual rates from Amazon Web Services. As a result of your Amazon Web Services Billing Conductor configuration, the payer account can also see the custom rate applied on the billing details page of the Amazon Web Services Billing console, or configure a cost and usage report per billing group. This documentation shows how you can configure Amazon Web Services Billing Conductor using its API. For more information about using the Amazon Web Services Billing Conductoruser interface, see the Amazon Web Services Billing Conductor User Guide.

Package controltower provides the API client, operations, and parameter types for AWS Control Tower. Amazon Web Services Control Tower offers application programming interface (API) operations that support programmatic interaction with these types of resources: Controls DisableControl EnableControl GetEnabledControl ListControlOperations ListEnabledControls UpdateEnabledControl Landing zones CreateLandingZone DeleteLandingZone GetLandingZone GetLandingZoneOperation ListLandingZones ListLandingZoneOperations ResetLandingZone UpdateLandingZone Baselines DisableBaseline EnableBaseline GetBaseline GetBaselineOperation GetEnabledBaseline ListBaselines ListEnabledBaselines ResetEnabledBaseline UpdateEnabledBaseline Tagging ListTagsForResource TagResource UntagResource For more information about these types of resources, see the Amazon Web Services Control Tower User Guide. These interfaces allow you to apply the Amazon Web Services library of pre-defined controls to your organizational units, programmatically. In Amazon Web Services Control Tower, the terms "control" and "guardrail" are synonyms. To call these APIs, you'll need to know: the controlIdentifier for the control--or guardrail--you are targeting. the ARN associated with the target organizational unit (OU), which we call the targetIdentifier . the ARN associated with a resource that you wish to tag or untag. To get the controlIdentifier for your Amazon Web Services Control Tower control: The controlIdentifier is an ARN that is specified for each control. You can view the controlIdentifier in the console on the Control details page, as well as in the documentation. The Amazon Web Services Control Tower controlIdentifier is unique in each Amazon Web Services Region for each control. You can find the controlIdentifier for each Region and control in the Tables of control metadataor the Control availability by Region tables in the Amazon Web Services Control Tower Controls Reference Guide. A quick-reference list of control identifers for the Amazon Web Services Control Tower legacy Strongly recommended and Elective controls is given in Resource identifiers for APIs and controlsin the Amazon Web Services Control Tower Controls Reference Guide. Remember that Mandatory controls cannot be added or removed. Some controls have two identifiers Example: You can find the {CONTROL_CATALOG_OPAQUE_ID} in the Amazon Web Services Control Tower Controls Reference Guide, or in the Amazon Web Services Control Tower console, on the Control details page. The Amazon Web Services Control Tower APIs for enabled controls, such as GetEnabledControl and ListEnabledControls always return an ARN of the same type given when the control was enabled. To get the targetIdentifier : The targetIdentifier is the ARN for an OU. In the Amazon Web Services Organizations console, you can find the ARN for the OU on the Organizational unit details page associated with that OU. OU ARN format: You can configure and launch an Amazon Web Services Control Tower landing zone with APIs. For an introduction and steps, see Getting started with Amazon Web Services Control Tower using APIs. For an overview of landing zone API operations, see Amazon Web Services Control Tower supports landing zone APIs. The individual API operations for landing zones are detailed in this document, the API reference manual, in the "Actions" section. You can apply the AWSControlTowerBaseline baseline to an organizational unit (OU) as a way to register the OU with Amazon Web Services Control Tower, programmatically. For a general overview of this capability, see Amazon Web Services Control Tower supports APIs for OU registration and configuration with baselines. You can call the baseline API operations to view the baselines that Amazon Web Services Control Tower enables for your landing zone, on your behalf, when setting up the landing zone. These baselines are read-only baselines. The individual API operations for baselines are detailed in this document, the API reference manual , in the "Actions" section. For usage examples, see Baseline API input and output examples with CLI. About Amazon Web Services Control Catalog identifiers The EnableControl and DisableControl API operations can be called by specifying either the Amazon Web Services Control Tower identifer or the Amazon Web Services Control Catalog identifier. The API response returns the same type of identifier that you specified when calling the API. If you use an Amazon Web Services Control Tower identifier to call the EnableControl API, and then call EnableControl again with an Amazon Web Services Control Catalog identifier, Amazon Web Services Control Tower returns an error message stating that the control is already enabled. Similar behavior applies to the DisableControl API operation. Mandatory controls and the landing-zone-level Region deny control have Amazon Web Services Control Tower identifiers only. Control API input and output examples with CLI Baseline API input and output examples with CLI Enable controls with CloudFormation Launch a landing zone with CloudFormation Control metadata tables (large page) Control availability by Region tables (large page) List of identifiers for legacy controls Controls reference guide Controls library groupings Creating Amazon Web Services Control Tower resources with Amazon Web Services CloudFormation To view the open source resource repository on GitHub, see aws-cloudformation/aws-cloudformation-resource-providers-controltower Amazon Web Services Control Tower supports Amazon Web Services CloudTrail, a service that records Amazon Web Services API calls for your Amazon Web Services account and delivers log files to an Amazon S3 bucket. By using information collected by CloudTrail, you can determine which requests the Amazon Web Services Control Tower service received, who made the request and when, and so on. For more about Amazon Web Services Control Tower and its support for CloudTrail, see Logging Amazon Web Services Control Tower Actions with Amazon Web Services CloudTrailin the Amazon Web Services Control Tower User Guide. To learn more about CloudTrail, including how to turn it on and find your log files, see the Amazon Web Services CloudTrail User Guide.

Package secretsmanager provides the client and types for making API requests to AWS Secrets Manager. AWS Secrets Manager is a web service that enables you to store, manage, and retrieve, secrets. This guide provides descriptions of the Secrets Manager API. For more information about using this service, see the AWS Secrets Manager User Guide (http://docs.aws.amazon.com/secretsmanager/latest/userguide/introduction.html). This version of the Secrets Manager API Reference documents the Secrets Manager API version 2017-10-17. As an alternative to using the API directly, you can use one of the AWS SDKs, which consist of libraries and sample code for various programming languages and platforms (such as Java, Ruby, .NET, iOS, and Android). The SDKs provide a convenient way to create programmatic access to AWS Secrets Manager. For example, the SDKs take care of cryptographically signing requests, managing errors, and retrying requests automatically. For more information about the AWS SDKs, including how to download and install them, see Tools for Amazon Web Services (http://aws.amazon.com/tools/). We recommend that you use the AWS SDKs to make programmatic API calls to Secrets Manager. However, you also can use the Secrets Manager HTTP Query API to make direct calls to the Secrets Manager web service. To learn more about the Secrets Manager HTTP Query API, see Making Query Requests (http://docs.aws.amazon.com/secretsmanager/latest/userguide/query-requests.html) in the AWS Secrets Manager User Guide. Secrets Manager supports GET and POST requests for all actions. That is, the API doesn't require you to use GET for some actions and POST for others. However, GET requests are subject to the limitation size of a URL. Therefore, for operations that require larger sizes, use a POST request. We welcome your feedback. Send your comments to awssecretsmanager-feedback@amazon.com (mailto:awssecretsmanager-feedback@amazon.com), or post your feedback and questions in the AWS Secrets Manager Discussion Forum (http://forums.aws.amazon.com/forum.jspa?forumID=296). For more information about the AWS Discussion Forums, see Forums Help (http://forums.aws.amazon.com/help.jspa). The JSON that AWS Secrets Manager expects as your request parameters and that the service returns as a response to HTTP query requests are single, long strings without line breaks or white space formatting. The JSON shown in the examples is formatted with both line breaks and white space to improve readability. When example input parameters would also result in long strings that extend beyond the screen, we insert line breaks to enhance readability. You should always submit the input as a single JSON text string. AWS Secrets Manager supports AWS CloudTrail, a service that records AWS API calls for your AWS account and delivers log files to an Amazon S3 bucket. By using information that's collected by AWS CloudTrail, you can determine which requests were successfully made to Secrets Manager, who made the request, when it was made, and so on. For more about AWS Secrets Manager and its support for AWS CloudTrail, see Logging AWS Secrets Manager Events with AWS CloudTrail (http://docs.aws.amazon.com/secretsmanager/latest/userguide/monitoring.html#monitoring_cloudtrail) in the AWS Secrets Manager User Guide. To learn more about CloudTrail, including how to turn it on and find your log files, see the AWS CloudTrail User Guide (http://docs.aws.amazon.com/awscloudtrail/latest/userguide/what_is_cloud_trail_top_level.html). See https://docs.aws.amazon.com/goto/WebAPI/secretsmanager-2017-10-17 for more information on this service. See secretsmanager package documentation for more information. https://docs.aws.amazon.com/sdk-for-go/api/service/secretsmanager/ To AWS Secrets Manager with the SDK use the New function to create a new service client. With that client you can make API requests to the service. These clients are safe to use concurrently. See the SDK's documentation for more information on how to use the SDK. https://docs.aws.amazon.com/sdk-for-go/api/ See aws.Config documentation for more information on configuring SDK clients. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config See the AWS Secrets Manager client SecretsManager for more information on creating client for this service. https://docs.aws.amazon.com/sdk-for-go/api/service/secretsmanager/#New

Package gopoet is a library to assist with generating Go code. It includes a model of the Go language that is simpler, and thus easier to work with, than those provided by the "go/ast" and "go/types" packages. It also provides adapter methods to allow simple interoperability with elements from the "go/types" and "reflect" packages. The Go Poet API and functionality is strongly influenced by a similar library for Java (for generating Java code) named Java Poet (https://github.com/square/javapoet). TypeName is the way Go Poet represents Go types. There is API in this package for constructing TypeName instances and for converting type representations from the "go/types" and "reflect" packages to TypeName values. It includes related types for representing function signatures, struct fields, and interface methods (Signature, FieldSpec, and MethodSpec respectively). GoFile is the root type in Go Poet for building a representation of Go language elements. The GoFile represents the file itself. The FileElement (and its various concrete implementations) represent top-level declarations in the file. And types like FieldSpec, InterfaceEmbed, and InterfaceMethod represent the elements that comprise struct and interface type definitions. Statements and expressions are not modeled by the Go Poet API, so function bodies and const and var initializers are represented with a type named CodeBlock. Usage of Go Poet involves constructing a GoFile, filling it with elements, and then using the various WriteGoFile* methods to then translate these models into Go source code. Import statements need not be defined manually. GoFile embeds a type named Imports which assists with managing import statements. It tracks all packages that are referenced, generating import aliases as necessary in the event of conflicts. After all referenced packages have been resolved, gopoet.Imports can then generate the import statements necessary. It also provides API for re-writing various references, to adjust their package qualifier so that references to elements or types in other packages are interpolated into Go source code with the correct qualifiers. The lowest level building blocks for the above API are representations of packages, symbols (references to named package-level elements, like consts, vars, types, and funcs), and method references (like a func symbol, but also includes a type qualifier, not just a package qualifier). Various parts of the API provide methods for accessing/converting to these types. Under the hood, it is packages and symbols that are re-written by an Imports instance to ensure all referenced elements are rendered with the package qualifier (e.g. the package name or associated import alias). Go Poet does not attempt to model Go statements and expressions or provide any way to create structured representations of function and method bodies. This is very similar to Java Poet *except* that Go Poet does not provide a custom mechanism for printing and formatting code. It instead relies on the existing facilities in the "fmt" and "text/template" packages. This package provides several types for modeling elements of the Go language that can then be referenced in code blocks (via "%s" or "%v" format specifiers or as elements of a data value rendered by a template). The CodeBlock type and related methods include API that resembles the various Print* functions in the "fmt" package. Before these are rendered to source code, references to Go elements and types are translated to account for the import statements (and any associated aliases) for the file context into which they are being rendered. Format arguments can also include instances of reflect.Type or even items from the "go/types" package: types.Type, types.Object, and *types.Package. These types of values will result in proper references to these elements when the code is actually rendered. Similarly, templates can be rendered, and the data value supplied to the template will be reconstructed, with any elements therein being first translated to have the right package qualifiers. As described above, code blocks (which represent function and method bodies and initializer expressions) can be rendered from templates and provided data values that the template renders. It is also possible to completely eschew modeling generated code with various elements and to generate a file completely from a template. In this case, you can still get value from Go Poet by using a *gopoet.Imports type to track imported packages and assign aliases, and then render the resulting []gopoet.ImportSpec from your template. Furthermore, the value that the template renders can contain instances of gopoet.TypeName, gopoet.Package, and gopoet.Symbol, just like when rendering code blocks for function bodies Calling imports.QualifyTemplateData(data) will re-write the values in the data value so they are properly qualified per the imported packages. Do this before rendering the template. One limitation of re-writing template data is that it cannot change the *types* of elements except in limited circumstances. For example, a Type from the "go/types" package cannot be converted to a gopoet.TypeName if the reference is a struct field whose type is types.Type (since gopoet.TypeName does not implement types.Type). Because of this, not all referenced types and elements can be re-written so may not be rendered correctly. For this reason, it is recommended to use gopoet.TypeName as the means of referring to types in a template data value, not types.Type or reflect.Type.

Package anaconda provides structs and functions for accessing version 1.1 of the Twitter API. Successful API queries return native Go structs that can be used immediately, with no need for type assertions. If you already have the access token (and secret) for your user (Twitter provides this for your own account on the developer portal), creating the client is simple: Executing queries on an authenticated TwitterApi struct is simple. Certain endpoints allow separate optional parameter; if desired, these can be passed as the final parameter. Anaconda implements most of the endpoints defined in the Twitter API documentation: https://dev.twitter.com/docs/api/1.1. For clarity, in most cases, the function name is simply the name of the HTTP method and the endpoint (e.g., the endpoint `GET /friendships/incoming` is provided by the function `GetFriendshipsIncoming`). In a few cases, a shortened form has been chosen to make life easier (for example, retweeting is simply the function `Retweet`) More detailed information about the behavior of each particular endpoint can be found at the official Twitter API documentation.

Package anaconda provides structs and functions for accessing version 1.1 of the Twitter API. Successful API queries return native Go structs that can be used immediately, with no need for type assertions. If you already have the access token (and secret) for your user (Twitter provides this for your own account on the developer portal), creating the client is simple: Executing queries on an authenticated TwitterApi struct is simple. Certain endpoints allow separate optional parameter; if desired, these can be passed as the final parameter. Anaconda implements most of the endpoints defined in the Twitter API documentation: https://dev.twitter.com/docs/api/1.1. For clarity, in most cases, the function name is simply the name of the HTTP method and the endpoint (e.g., the endpoint `GET /friendships/incoming` is provided by the function `GetFriendshipsIncoming`). In a few cases, a shortened form has been chosen to make life easier (for example, retweeting is simply the function `Retweet`) More detailed information about the behavior of each particular endpoint can be found at the official Twitter API documentation.