apollo-codegen-flow-legacy - npm Package Versions

[0.26.0] - 2024-08-21

Important: 1 potentially breaking changes below, indicated by ❗ BREAKING ❗

❗ BREAKING ❗

• The --client-timeout flag now represents the period over which we allow retries - @aaronArinder PR #2019

  The documentation for this flag indicated that this was the period over which Rover would retry a command if there were retryable HTTP errors. However, this was not the case due to complexities in how the client was instantiated. This has now been corrected, so the documented behaviour matches the actual behaviour.

🚀 Features

• Make rover operate asynchronously - @aaronArinder @Geal PR #2035

  Removes the use of the reqwest blocking client allowing rover to operate using an asynchronous tokio runtime. This will bring performance improvements, particularly where working with large sets of subgraphs.

• Add --graph-ref to supergraph compose - @jonathanrainer PR #2001

  Adds the same capabilities to supergraph compose as were added to rover dev in 0.25.0. You can now specify an existing Studio graphref and the command will run composition over the subgraphs specified in the graphref, as well as any overrides specified in a given supergraph config.

• Add new rover cloud command - @loshz PR #2008

  Adds a new command to allow you to push or pull the Router config to a Cloud Router that is running in Studio

• Add new rover cloud config validate subcommand - @loshz PR #2055

  Adds a new command enabling you to validate the Router config for a Cloud Router

🐛 Fixes

• Don't run IsFederatedGraph before running SubgraphFetchQuery - @glasser PR #2004

  Previously we were checking IsFederatedGraph before running SubgraphFetch, but the same check is actually performed in SubgraphFetch anyway so the first call to IsFederatedSubgraph is unnecessary.

• Allow --graph-ref to support contract variants - @jonathanrainer PR #2036

  There was a bug where using the graphref of a contract variant would cause an error about non-federated graphs. This has been resolved and now contract variant graphrefs can also be used.

• Remove last reference to blocking reqwest client - @loshz PR #2050

  One reference to the blocking reqwest client had been leftover from the move to async operation in #2035, this was removed.

• Ensure NPM installer on Windows works correctly - @jonathanrainer PR #2059

  The NPM installer on Windows had been broken because it was attempt to rename a binary from rover to its correct name, rather than from rover.exe to its correct name. This has been corrected and extra CI and unit tests added to prevent a recurrence.

• Make sure a message is returned to the user when cloud config is updated correctly - @loshz PR #2063

• Fix a regression in rover dev where it would no longer watch subgraphs correctly - @jonathanrainer PR #2065

🛠 Maintenance

• Integrate the Smoke Tests Into Integration Test Framework To Allow Easier Extension - @jonathanrainer PR #1999

• Add nicer names to GitHub actions workflow - @jonathanrainer PR #2002

• Add test for subgraph introspect - @jonathanrainer PR #2003

• Update node.js packages - @jonathanrainer PR #2006

  Includes eslint to v9.8.0 and node to v20.16.0

• Update Rust to v1.80.0 - @jonathanrainer PR #2007

• Fix up CODEOWNERS to bring us inline with standard - @jonathanrainer PR #2016

• Add E2E test for supergraph compose - @aaronArinder PR #2005

• Add E2E test for subgraph fetch - @jonathanrainer PR #2015

• Update Rust crates - @aaronArinder PR #2011

  Includes apollo-parser to v0.8 and octocrab to v0.39.0

• Update apollographql/router to v1.52.0 - @aaronArinder PR #2010

• Add E2E test for supergraph compose - @aaronArinder PR #2005

• Rename a test and add a #[once] macro to a fixture - @aaronArinder PR #2017

• Add E2E tests for graph introspect - @jonathanrainer PR #2020

• Add missing inherit for secrets - @jonathanrainer PR #2021

• Add E2E tests for whoami - @jonathanrainer PR #2022

• Update rstest to v0.22.0 - @jonathanrainer PR #2030

• Add E2E tests for config clear - @aaronArinder PR #2029

• Add E2E tests for subgraph lint - @aaronArinder PR #2023

• Add E2E tests for subgraph publish - @jonathanrainer PR #2031

• Add E2E tests for graph fetch - @aaronArinder PR #2026

• Add E2E tests for supergraph fetch - @aaronArinder PR #2024

• Add E2E tests for subgraph list - @aaronArinder PR #2027

• Add E2E tests for graph check and subgraph check - @aaronArinder PR #2025

• Add E2E tests for install plugin - @aaronArinder PR #2028

• Make E2E tests account for changes in #2019 - @jonathanrainer PR #2032

• Deprecate the use of Emoji - @loshz PR #2034

• Let E2E tests message Slack if there are nightly failures - @jonathanrainer PR #2033

• Tighten up Slack Messaging for E2E tests - @jonathanrainer PR #2039

• Update axios-mock-adapter to v2.0.0 - @jonathanrainer PR #2043

• Update derive-getters to v0.5.0 - @jonathanrainer PR #2042

• Update eslient to v9.9.0 - @jonathanrainer PR #2041

• Update Rust to v1.80.1 - @jonathanrainer PR #2040

• Update axios to v1.7.4 - @jonathanrainer PR #2048

• Update CODEONWERS - @aaronArinder PR #2052

• Update termimad to v0.30.0 - @jonathanrainer PR #2054

• Add step to fail workflow if matrix branch fails - @jonathanrainer PR #2044

• Increase test coverage for operations/cloud/config - @loshz PR #2057

• Update gh CircleCI Orb to v2.4.0 - @jonathanrainer PR #2062

• Update mockito to v1.5.0 - @jonathanrainer PR #2061

• Update dircpy to v0.3.19 - @jonathanrainer PR #2060

📚 Documentation

• Document E2E test gotchas - @aaronArinder PR #2018
• Fix table to be compatible with new docs platform - @shorgi PR #2038
• Remove unhelpful note - @Meschreiber PR #2053
• Add Summit callout - @Meschreiber PR #2058
• Adds --graph-ref to supergraph compose docs - @jackonawalk PR #2037

[0.25.0] - 2024-07-22

🚀 Features

• Enable Retries For Transient Errors Connecting To Graphs/Subgraphs - @jonathanrainer PR #1936

  This turns on retries at the HTTP level for connections to graphs/subgraphs to minimize connection resets and cancellations. Also, a new --subgraph-retries flag for rover dev lets you set the number of retries allowed when trying to re-establish a connection.

• Add --graph-ref flag to rover dev - @dotdat PR #1984

  Introduces subgraph mirroring to rover dev. Subgraph mirroring inherits the subgraph routing URLs and schemas from an existing Studio graphref. This makes it easy to spin up a locally running supergraph without maintaining a supergraph config. See here for more information.

🐛 Fixes

• Fixes issues related to passing filenames to --output - @jonathanrainer PR #1996

  An issue was raised whereby previous versions of Rover supported passing filenames to the --output flag but this was broken in v0.24.0. This has now been fixed and the previous functionality restored.

🛠 Maintenance

• Expand Smoke Tests To Run On All Supported Platforms - @jonathanrainer PR #1980

• Fix cron expression, so it runs only once per day - @jonathanrainer PR #1986

• Ensure we always use the correct version of Federation when testing - @jonathanrainer PR #1987

• Add manual Smoke test invocation and pin Windows to npm@9 for testing - @jonathanrainer PR #1989

• Update apollographql/router to v1.51.0 - @jonathanrainer PR #1988

• Update node.js packages - @jonathanrainer PR #1979

  Includes @eslint/compat to v1.1.1, eslint to v9.7.0, node.js to v20.15.1, npm to v10.8.2 and prettier to v3.3.3

• Make sure x86 Mac Tests use 'latest' supergraph plugin version - @jonathanrainer PR #1990

• Make sure homebrew runs brew update when we use it - @jonathanrainer PR #1993

📚 Documentation

• Adds graph-ref flag to dev subcommand docs - @jackonawalk PR #1945
• Update schema proposals capabilities docs - @Meschreiber PR #1949

[0.24.0] 2024-07-15

Important: 1 potentially breaking change below, indicated by ❗ BREAKING ❗

❗ BREAKING ❗

• Removed the deprecated plain and json options for --output - @dylan-apollo PR #1804

  The --output option is now only for specifying a file to write to. The --format option should be used to specify the format of the output.

🚀 Features

• Return the name of the linting rule that is violated, as well as the code - @jonathanrainer PR #1907

  Originally only the message from the linting violation was included in the response, but now it also includes the name of the specific linting rule to aid debugging

• Use the Router's /health?ready endpoint to check readiness - @nmoutschen PR #1939

  Previously rover dev used a simple query to establish readiness, but this did not allow for router customizations.

• Adding architecture and OS metrics - @aaronArinder PR #1947

  Allows us to track the Operating Systems and Architectures in use by our users, this will give us more information as to where to focus support efforts

• Allow aarch64 macOS to pull correct supergraph binaries where available - @jonathanrainer PR #1971

  We recently started publishing supergraph binaries for aarch64, so if they are available Rover will use them in preference to x86_64 binaries.

🐛 Fixes

• Don't panic if the telemetry client cannot be initialised - @dylan-apollo PR #1897 - Issue #1893

• Rename .cargo/config to .cargo/config.toml - @jonathanrainer PR #1921

• Fix pnpm installs by moving the binary download location - @jonathanrainer PR #1927 - Issue #1881

  After we inlined the binary-install dependency in v0.23.0 this changed where the downloaded binary was stored when using pnpm. This caused users running the binary to enter an infinite loop. This moves the binary to a new location which avoids this.

• Don't panic on file watcher errors - @nmoutschen PR #1935

  Instead of panicking when errors occur watching files return those errors gracefully to the user.

• Store binaries with version numbers attached so upgrades are possible - @jonathanrainer PR #1932 - Issue #1563

  When downloading binaries via npm they were always stored as rover despite the version. As such, when a new version came out the upgrade would fail. This now doesn't happen, as binaries are stored with their versions number in the name.

• Ensure correct URL is used if subgraph_url and routing_url are provided in a supergraph schema - @jonathanrainer PR #1948 - Issue #1782

• Let --output accept paths with missing intermediate directories - @jonathanrainer PR #1944 - Issue #1787

• Allow rover dev to read Federation Version from supergraph schema - @jonathanrainer PR #1950 - Issue #1735

  The Federation version could be set in the supegraph schema but was being ignored by rover dev. It now is taken into account, along with the overriding environment variable.

• Stop .exe being printed after Federation version during composition - @jonathanrainer PR #1951 - Issue #1390

• Reinstate support for glibc 2.17 - @jonathanrainer PR #1953

  In resolving the issues with CentOS 7 we accidentally removed support for glibc 2.17, this has now been restored

• Be more lenient about supergraph binary versions - @dylan-apollo PR #1966

  In resolving #1390, we were too restrictive in what counted as a valid version. This restores the correct behaviour

• Set package.json to a stable version when testing NPM Installers - @jonathanrainer PR #1967

  When testing whether our NPM installers worked correctly we were trying to download the latest rover binary. On release PRs, where the binary didn't yet exist, this was causing problems.

• Fix mocking of calls to Orbiter in Installer tests - @jonathanrainer PR #1968

• Remove noisy errors from intermediate composition states - @aaronArinder PR #1956

  When rover dev composes multiple subgraphs it does so one at a time. As such if there are dependencies there can be noisy ephemeral errors, this fixes that by waiting until all subgraphs are added before trying composition.

🛠 Maintenance

• Update GitHub CircleCI Orb to v2.3.0 - @Geal PR #1831

• Update plugins to Fed 2.7 and Router 1.43.0 - @smyrick PR #1877

• Update CODEOWNERS - @dotdat PR #1890

  Make Betelgeuse the primary owners of the Rover repository

• Update lychee-lib to v0.15 - @dotdata PR #1902

• Add tests and provide status codes as part of linter errors - @dotdat PR #1903

• Add nix files to .gitignore - @aaronArinder PR #1908

• Update apollographql/router to v1.47.0 - @aaronArinder PR #1841

• Update apollographql/federation-rs to v2.7.8 - @aaronArinder PR #1746

• Update node.js to v20 - @aaronArinder PR #1778

• Update Rust to v1.76.0 and the Rust CircleCI Orb to v1.6.1 - @aaronArinder PR #1788

• Update serial_test to v3 - @jonathanrainer PR #1836

• Update which to v6 - @jonathanrainer PR #1835

• Update apollographql/federation-rs to v2.8.0 - @aaronArinder PR #1909

• Update tar to v6.2.1 - @aaronArinder PR #1888

• Update tar to v7 - @aaronArinder PR #1914

• Update node.js packages - @aaronArinder PR #1830

  Includes eslint to v8.57.0, node.js to v20.14.0, nodemon to v3.1.2, npm to v10.8.1 and prettier to v3.3.0

• Update Rust to v1.78.0 - @aaronArinder PR #1912

• Update apollographql/router to v1.48.0 - @aaronArinder PR #1917

• Update zip to v2 - @jonathanrainer PR #1916

• Update eslint to v9.4.0 - @dotdat PR #1913

• Update hyper to v1.0 - @dotdat PR #1789

• Add tests for socket names - @jonathanrainer PR #1918

  In future dependency upgrades we want to ensure that behaviour around socket naming works as expected, so add a test to ensure that.

• Update rust packages - @jonathanrainer PR #1755

  Consolidates updates of pre-1.0 rust crates, check PR for full details of crates updated

• Update notify to v6 - @jonathanrainer PR #1603

• Include cargo-deny checks on PRs - @jonathanrainer PR #1910

  Now we can check for licences that don't correspond to our allowed list and pick up on dependency issues live on PRs

• Pin node.js dev dependencies - @aaronArinder PR #1923

• Allow 0BSD licence - @aaronArinder PR #1924

• Update interprocess to v2 - @dotdat PR #1915

• Update apollographql/router to v1.48.1 - @dotdat PR #1926

• Update Rust to v1.79.0 - @jonathanrainer PR #1931

• Update git2 to v0.19 - @jonathanrainer PR #1930

• Update node.js packages - @jonathanrainer PR #1929

  Includes @eslint/compat to v1.1.0, eslint to v9.5.0, graphql to v16.8.2 and prettier to v3.3.2

• Migrate CI to use manylinux rather than CentOS 7 - @jonathanrainer PR #1952

  As CentOS 7 has now entered End-of-Life, migrate our CI to use a different Linux distribution.

• Update apollographql/router to v1.49.1 - @jonathanrainer PR #1933

• Update apollographql/federation-rs to v2.8.2 - @jonathanrainer PR #1934

• Update node.js packages - @jonathanrainer PR #1940

  Includes eslint to v9.6.0, node.js to v20.15.0, nodemon to v3.1.4, graphql to v16.9.0

• Fix clippy warnings - @loshz PR #1955

• Allow integration tests to accept a pre-compiled binary - @jonathanrainer PR #1957

• Run macOS x86_64 integration tests in GitHub Actions - @nmoutschen PR #1958

  Due to CircleCI's deprecation of x86_64 macOS executors use GitHub Actions to still run our tests on this architecture

• Add smoke tests for rover dev - @jonathanrainer PR #1961

• Update apollographql/router to v1.50.0 - @jonathanrainer PR #1954

• Trigger GitHub Actions from CircleCI - @nmoutschen PR #1959

• Add docs team to CODEOWNERS - @aaronArinder PR #1965

• Fix up Release CI and explicitly add tokio rt-multi-thread flag - @jonathanrainer PR #1972

• Add context to auth output when saving an API Key - @loshz PR #1974

📚 Documentation

• Minor update to README.md - @tratzlaff PR #1880

  Fixes use of numbered lists in the README.md

• Remove failing/redundant links from docs - @dotdat PR #1894

• Update docs style - @Meschreiber PR #1883

  Update formatting and admonitions to most recent conventions.

• Update frontmatter - @Meschreiber PR #1898

  Updates title casing and adds metadata to subtitles

• Clarify subgraph publish can only create variants not graphs - @Meschreiber PR #1938

• Make example using - instead of filepath clearer - @aaronArinder PR #1963

• Update Router terminology - @Meschreiber PR #1925

  Update the uses of Apollo Router to GraphOS Router or Apollo Router Core where necessary

• Update documentation to make it clear we collect CPU Architecture, per command - @aaronArinder PR #1964

[0.23.0] - 2024-03-26

🚀 Features

• Add --no-url shorthand to subgraph publish - @lennyburdette PR #1809

  This is slightly more convenient and less awkward than --routing-url "" --allow-invalid-routing-url

• Support unix socket URLs - @geal PR #1879

  Since its 1.43.0 release, the Router can now connect to subgraph over unix sockets. This removes a warning when publishing a schema with a unix:// URL.

🐛 Fixes

• Use task specific rayon threadpools and not the global threadpool - @garypen PR #1872

  This increases rover's reliability by executing independent tasks in different thread pools.

• Prevent an infinite loop when restarting the router - @geal PR #1855

  When restarting a Router on schema updates, it could happen that an internal task of Rover would go in an infinite loop and consume CPU needlessly. This is now fixed and should make rover dev more reliable.

• Use proposalCoverage`` in addition to severityLevel`` to build correct proposal check messaging - @swcollard PR #1845

  This updates the message on proposal checks depending on the proposalCoverage field

🛠 Maintenance

• Upgrade axios to address a security warning - @goto-bus-stop PR #1819

  The vulnerability didn't affect rover, but now you won't get a warning for it!

• Remove yanked online check - @dylan-apollo PR #1803

📚 Documentation

• Update dev docs about which Router version is used - @smyrick PR #1822

• Update warning about federation_version in rover compose - @smyrick, @Meschreiber PR #1806

• Document how to use subgraph fetch with proposals - @Meschreiber PR #1823

[0.22.0] - 2023-12-13

🚀 Features

• Add offline license support - @BrynCooke PR #1796 - Issue #1793

  Adds rover license fetch <graph_ref>

  Output:

  rover license fetch --graph-id starstuff --profile gh
  
  Fetching license for starstuff using credentials from the gh profile.
  Success!
  <redacted jwt>
  

🐛 Fixes

• Handle new rate limit error - @bnjjj #1798

  Update the GraphQL schema and handle the new rate limit error.

🛠 Maintenance

• First trial use of a generator (Scaffolding code for creating a new verb for an existing noun/command) - @tapegram PR #1786

  First try at taking the instructions from the readme on how to scaffold a new verb on an existing command and added plop tooling to be able to generate the scaffolding automatically.

  npx plop

  This is an initial exploratory PR. Later PRs will build this into the dev tooling and expand on the functionality (if we don't decide to remove it)

📚 Documentation

• Move Validating client ops to Apollo CLI section - @Meschreiber #1783

  This PR moves Validating client operations into the Rover > Apollo CLI section.

• Use shared content component for GH action instructions - @Meschreiber #1780

  This PR replaces some text with a new shared content component containing that text.

• Remove note on restricted supergraph.yml expansion - @dylan-apollo #1779 - issue #1629

  supergraph.yaml files now supports environment variable expansion everywhere, not just in introspection headers.