Search API

Package firestore provides a client for reading and writing to a Cloud Firestore database. See https://cloud.google.com/firestore/docs for an introduction to Cloud Firestore and additional help on using the Firestore API. See https://godoc.org/cloud.google.com/go for authentication, timeouts, connection pooling and similar aspects of this package. Note: you can't use both Cloud Firestore and Cloud Datastore in the same project. To start working with this package, create a client with a project ID: In Firestore, documents are sets of key-value pairs, and collections are groups of documents. A Firestore database consists of a hierarchy of alternating collections and documents, referred to by slash-separated paths like "States/California/Cities/SanFrancisco". This client is built around references to collections and documents. CollectionRefs and DocumentRefs are lightweight values that refer to the corresponding database entities. Creating a ref does not involve any network traffic. Use DocumentRef.Get to read a document. The result is a DocumentSnapshot. Call its Data method to obtain the entire document contents as a map. You can also obtain a single field with DataAt, or extract the data into a struct with DataTo. With the type definition we can extract the document's data into a value of type State: Note that this client supports struct tags beginning with "firestore:" that work like the tags of the encoding/json package, letting you rename fields, ignore them, or omit their values when empty. To retrieve multiple documents from their references in a single call, use Client.GetAll. For writing individual documents, use the methods on DocumentReference. Create creates a new document. The first return value is a WriteResult, which contains the time at which the document was updated. Create fails if the document exists. Another method, Set, either replaces an existing document or creates a new one. To update some fields of an existing document, use Update. It takes a list of paths to update and their corresponding values. Use DocumentRef.Delete to delete a document. You can condition Deletes or Updates on when a document was last changed. Specify these preconditions as an option to a Delete or Update method. The check and the write happen atomically with a single RPC. Here we update a doc only if it hasn't changed since we read it. You could also do this with a transaction. To perform multiple writes at once, use a WriteBatch. Its methods chain for convenience. WriteBatch.Commit sends the collected writes to the server, where they happen atomically. You can use SQL to select documents from a collection. Begin with the collection, and build up a query using Select, Where and other methods of Query. Supported operators include '<', '<=', '>', '>=', '==', 'in', 'array-contains', and 'array-contains-any'. Call the Query's Documents method to get an iterator, and use it like the other Google Cloud Client iterators. To get all the documents in a collection, you can use the collection itself as a query. Firestore supports similarity search over embedding vectors. See Query.FindNearest for details. You can partition the documents of a Collection Group allowing for smaller subqueries. You can also Serialize/Deserialize queries making it possible to run/stream the queries elsewhere; another process or machine for instance. Use a transaction to execute reads and writes atomically. All reads must happen before any writes. Transaction creation, commit, rollback and retry are handled for you by the Client.RunTransaction method; just provide a function and use the read and write methods of the Transaction passed to it. This package supports the Cloud Firestore emulator, which is useful for testing and development. Environment variables are used to indicate that Firestore traffic should be directed to the emulator instead of the production Firestore service. To install and run the emulator and its environment variables, see the documentation at https://cloud.google.com/sdk/gcloud/reference/beta/emulators/firestore/. Once the emulator is running, set FIRESTORE_EMULATOR_HOST to the API endpoint.

Package cloudwatchlogs provides the API client, operations, and parameter types for Amazon CloudWatch Logs. You can use Amazon CloudWatch Logs to monitor, store, and access your log files from EC2 instances, CloudTrail, and other sources. You can then retrieve the associated log data from CloudWatch Logs using the CloudWatch console. Alternatively, you can use CloudWatch Logs commands in the Amazon Web Services CLI, CloudWatch Logs API, or CloudWatch Logs SDK. You can use CloudWatch Logs to: Monitor logs from EC2 instances in real time: You can use CloudWatch Logs to monitor applications and systems using log data. For example, CloudWatch Logs can track the number of errors that occur in your application logs. Then, it can send you a notification whenever the rate of errors exceeds a threshold that you specify. CloudWatch Logs uses your log data for monitoring so no code changes are required. For example, you can monitor application logs for specific literal terms (such as "NullReferenceException"). You can also count the number of occurrences of a literal term at a particular position in log data (such as "404" status codes in an Apache access log). When the term you are searching for is found, CloudWatch Logs reports the data to a CloudWatch metric that you specify. Monitor CloudTrail logged events: You can create alarms in CloudWatch and receive notifications of particular API activity as captured by CloudTrail. You can use the notification to perform troubleshooting. Archive log data: You can use CloudWatch Logs to store your log data in highly durable storage. You can change the log retention setting so that any log events earlier than this setting are automatically deleted. The CloudWatch Logs agent helps to quickly send both rotated and non-rotated log data off of a host and into the log service. You can then access the raw log data when you need it.

Package rod is a high-level driver directly based on DevTools Protocol. This example opens https://github.com/, searches for "git", and then gets the header element which gives the description for Git. Rod use https://golang.org/pkg/context to handle cancellations for IO blocking operations, most times it's timeout. Context will be recursively passed to all sub-methods. For example, methods like Page.Context(ctx) will return a clone of the page with the ctx, all the methods of the returned page will use the ctx if they have IO blocking operations. Page.Timeout or Page.WithCancel is just a shortcut for Page.Context. Of course, Browser or Element works the same way. Shows how we can further customize the browser with the launcher library. Usually you use launcher lib to set the browser's command line flags (switches). Doc for flags: https://peter.sh/experiments/chromium-command-line-switches Shows how to change the retry/polling options that is used to query elements. This is useful when you want to customize the element query retry logic. When rod doesn't have a feature that you need. You can easily call the cdp to achieve it. List of cdp API: https://github.com/go-rod/rod/tree/main/lib/proto Shows how to disable headless mode and debug. Rod provides a lot of debug options, you can set them with setter methods or use environment variables. Doc for environment variables: https://pkg.go.dev/github.com/go-rod/rod/lib/defaults We use "Must" prefixed functions to write example code. But in production you may want to use the no-prefix version of them. About why we use "Must" as the prefix, it's similar to https://golang.org/pkg/regexp/#MustCompile Shows how to share a remote object reference between two Eval. Shows how to listen for events. Shows how to intercept requests and modify both the request and the response. The entire process of hijacking one request: The --req-> and --res-> are the parts that can be modified. Show how to handle multiple results of an action. Such as when you login a page, the result can be success or wrong password. Example_search shows how to use Search to get element inside nested iframes or shadow DOMs. It works the same as https://developers.google.com/web/tools/chrome-devtools/dom#search Shows how to update the state of the current page. In this example we enable the network domain. Rod uses mouse cursor to simulate clicks, so if a button is moving because of animation, the click may not work as expected. We usually use WaitStable to make sure the target isn't changing anymore. When you want to wait for an ajax request to complete, this example will be useful.

Package scrape provides a searching api on top of golang.org/x/net/html

Package marketplacemetering provides the API client, operations, and parameter types for AWSMarketplace Metering. This reference provides descriptions of the low-level AWS Marketplace Metering Service API. AWS Marketplace sellers can use this API to submit usage data for custom usage dimensions. For information on the permissions you need to use this API, see AWS Marketplace metering and entitlement API permissions in the AWS Marketplace Seller Guide. Submitting Metering Records MeterUsage - Submits the metering record for an AWS Marketplace product. MeterUsage is called from an EC2 instance or a container running on EKS or ECS. BatchMeterUsage - Submits the metering record for a set of customers. BatchMeterUsage is called from a software-as-a-service (SaaS) application. Accepting New Customers along with the CustomerAWSAccountId and ProductCode . Entitlement and Metering for Paid Container Products BatchMeterUsage API calls are captured by AWS CloudTrail. You can use Cloudtrail to verify that the SaaS metering records that you sent are accurate by searching for records with the eventName of BatchMeterUsage . You can also use CloudTrail to audit records over time. For more information, see the AWS CloudTrail User Guide.

Package gosnowflake is a pure Go Snowflake driver for the database/sql package. Clients can use the database/sql package directly. For example: Use the Open() function to create a database handle with connection parameters: The Go Snowflake Driver supports the following connection syntaxes (or data source name (DSN) formats): where all parameters must be escaped or use Config and DSN to construct a DSN string. For information about account identifiers, see the Snowflake documentation (https://docs.snowflake.com/en/user-guide/admin-account-identifier.html). The following example opens a database handle with the Snowflake account named "my_account" under the organization named "my_organization", where the username is "jsmith", password is "mypassword", database is "mydb", schema is "testschema", and warehouse is "mywh": The connection string (DSN) can contain both connection parameters (described below) and session parameters (https://docs.snowflake.com/en/sql-reference/parameters.html). The following connection parameters are supported: account <string>: Specifies your Snowflake account, where "<string>" is the account identifier assigned to your account by Snowflake. For information about account identifiers, see the Snowflake documentation (https://docs.snowflake.com/en/user-guide/admin-account-identifier.html). If you are using a global URL, then append the connection group and ".global" (e.g. "<account_identifier>-<connection_group>.global"). The account identifier and the connection group are separated by a dash ("-"), as shown above. This parameter is optional if your account identifier is specified after the "@" character in the connection string. region <string>: DEPRECATED. You may specify a region, such as "eu-central-1", with this parameter. However, since this parameter is deprecated, it is best to specify the region as part of the account parameter. For details, see the description of the account parameter. database: Specifies the database to use by default in the client session (can be changed after login). schema: Specifies the database schema to use by default in the client session (can be changed after login). warehouse: Specifies the virtual warehouse to use by default for queries, loading, etc. in the client session (can be changed after login). role: Specifies the role to use by default for accessing Snowflake objects in the client session (can be changed after login). passcode: Specifies the passcode provided by Duo when using multi-factor authentication (MFA) for login. passcodeInPassword: false by default. Set to true if the MFA passcode is embedded in the login password. Appends the MFA passcode to the end of the password. loginTimeout: Specifies the timeout, in seconds, for login. The default is 60 seconds. The login request gives up after the timeout length if the HTTP response is success. requestTimeout: Specifies the timeout, in seconds, for a query to complete. 0 (zero) specifies that the driver should wait indefinitely. The default is 0 seconds. The query request gives up after the timeout length if the HTTP response is success. authenticator: Specifies the authenticator to use for authenticating user credentials: To use the internal Snowflake authenticator, specify snowflake (Default). If you want to cache your MFA logins, use AuthTypeUsernamePasswordMFA authenticator. To authenticate through Okta, specify https://<okta_account_name>.okta.com (URL prefix for Okta). To authenticate using your IDP via a browser, specify externalbrowser. To authenticate via OAuth, specify oauth and provide an OAuth Access Token (see the token parameter below). application: Identifies your application to Snowflake Support. insecureMode: false by default. Set to true to bypass the Online Certificate Status Protocol (OCSP) certificate revocation check. IMPORTANT: Change the default value for testing or emergency situations only. token: a token that can be used to authenticate. Should be used in conjunction with the "oauth" authenticator. client_session_keep_alive: Set to true have a heartbeat in the background every hour to keep the connection alive such that the connection session will never expire. Care should be taken in using this option as it opens up the access forever as long as the process is alive. ocspFailOpen: true by default. Set to false to make OCSP check fail closed mode. validateDefaultParameters: true by default. Set to false to disable checks on existence and privileges check for Database, Schema, Warehouse and Role when setting up the connection tracing: Specifies the logging level to be used. Set to error by default. Valid values are trace, debug, info, print, warning, error, fatal, panic. disableQueryContextCache: disables parsing of query context returned from server and resending it to server as well. Default value is false. clientConfigFile: specifies the location of the client configuration json file. In this file you can configure Easy Logging feature. disableSamlURLCheck: disables the SAML URL check. Default value is false. All other parameters are interpreted as session parameters (https://docs.snowflake.com/en/sql-reference/parameters.html). For example, the TIMESTAMP_OUTPUT_FORMAT session parameter can be set by adding: A complete connection string looks similar to the following: Session-level parameters can also be set by using the SQL command "ALTER SESSION" (https://docs.snowflake.com/en/sql-reference/sql/alter-session.html). Alternatively, use OpenWithConfig() function to create a database handle with the specified Config. # Connection Config You can also connect to your warehouse using the connection config. The dbSql library states that when you want to take advantage of driver-specific connection features that aren’t available in a connection string. Each driver supports its own set of connection properties, often providing ways to customize the connection request specific to the DBMS For example: If you are using this method, you dont need to pass a driver name to specify the driver type in which you are looking to connect. Since the driver name is not needed, you can optionally bypass driver registration on startup. To do this, set `GOSNOWFLAKE_SKIP_REGISTERATION` in your environment. This is useful you wish to register multiple verions of the driver. Note: GOSNOWFLAKE_SKIP_REGISTERATION should not be used if sql.Open() is used as the method to connect to the server, as sql.Open will require registration so it can map the driver name to the driver type, which in this case is "snowflake" and SnowflakeDriver{}. You can load the connnection configuration with .toml file format. With two environment variables SNOWFLAKE_HOME(connections.toml file directory) SNOWFLAKE_DEFAULT_CONNECTION_NAME(DSN name), the driver will search the config file and load the connection. You can find how to use this connection way at ./cmd/tomlfileconnection or Snowflake doc: https://docs.snowflake.com/en/developer-guide/snowflake-cli-v2/connecting/specify-credentials The Go Snowflake Driver honors the environment variables HTTP_PROXY, HTTPS_PROXY and NO_PROXY for the forward proxy setting. NO_PROXY specifies which hostname endings should be allowed to bypass the proxy server, e.g. no_proxy=.amazonaws.com means that Amazon S3 access does not need to go through the proxy. NO_PROXY does not support wildcards. Each value specified should be one of the following: The end of a hostname (or a complete hostname), for example: ".amazonaws.com" or "xy12345.snowflakecomputing.com". An IP address, for example "192.196.1.15". If more than one value is specified, values should be separated by commas, for example: By default, the driver's builtin logger is exposing logrus's FieldLogger and default at INFO level. Users can use SetLogger in driver.go to set a customized logger for gosnowflake package. In order to enable debug logging for the driver, user could use SetLogLevel("debug") in SFLogger interface as shown in demo code at cmd/logger.go. To redirect the logs SFlogger.SetOutput method could do the work. A custom query tag can be set in the context. Each query run with this context will include the custom query tag as metadata that will appear in the Query Tag column in the Query History log. For example: A specific query request ID can be set in the context and will be passed through in place of the default randomized request ID. For example: If you need query ID for your query you have to use raw connection. For queries: ``` ``` For execs: ``` ``` The result of your query can be retrieved by setting the query ID in the WithFetchResultByID context. ``` ``` From 0.5.0, a signal handling responsibility has moved to the applications. If you want to cancel a query/command by Ctrl+C, add a os.Interrupt trap in context to execute methods that can take the context parameter (e.g. QueryContext, ExecContext). See cmd/selectmany.go for the full example. The Go Snowflake Driver now supports the Arrow data format for data transfers between Snowflake and the Golang client. The Arrow data format avoids extra conversions between binary and textual representations of the data. The Arrow data format can improve performance and reduce memory consumption in clients. Snowflake continues to support the JSON data format. The data format is controlled by the session-level parameter GO_QUERY_RESULT_FORMAT. To use JSON format, execute: The valid values for the parameter are: If the user attempts to set the parameter to an invalid value, an error is returned. The parameter name and the parameter value are case-insensitive. This parameter can be set only at the session level. Usage notes: The Arrow data format reduces rounding errors in floating point numbers. You might see slightly different values for floating point numbers when using Arrow format than when using JSON format. In order to take advantage of the increased precision, you must pass in the context.Context object provided by the WithHigherPrecision function when querying. Traditionally, the rows.Scan() method returned a string when a variable of types interface was passed in. Turning on the flag ENABLE_HIGHER_PRECISION via WithHigherPrecision will return the natural, expected data type as well. For some numeric data types, the driver can retrieve larger values when using the Arrow format than when using the JSON format. For example, using Arrow format allows the full range of SQL NUMERIC(38,0) values to be retrieved, while using JSON format allows only values in the range supported by the Golang int64 data type. Users should ensure that Golang variables are declared using the appropriate data type for the full range of values contained in the column. For an example, see below. When using the Arrow format, the driver supports more Golang data types and more ways to convert SQL values to those Golang data types. The table below lists the supported Snowflake SQL data types and the corresponding Golang data types. The columns are: The SQL data type. The default Golang data type that is returned when you use snowflakeRows.Scan() to read data from Arrow data format via an interface{}. The possible Golang data types that can be returned when you use snowflakeRows.Scan() to read data from Arrow data format directly. The default Golang data type that is returned when you use snowflakeRows.Scan() to read data from JSON data format via an interface{}. (All returned values are strings.) The standard Golang data type that is returned when you use snowflakeRows.Scan() to read data from JSON data format directly. Go Data Types for Scan() =================================================================================================================== | ARROW | JSON =================================================================================================================== SQL Data Type | Default Go Data Type | Supported Go Data | Default Go Data Type | Supported Go Data | for Scan() interface{} | Types for Scan() | for Scan() interface{} | Types for Scan() =================================================================================================================== BOOLEAN | bool | string | bool ------------------------------------------------------------------------------------------------------------------- VARCHAR | string | string ------------------------------------------------------------------------------------------------------------------- DOUBLE | float32, float64 [1] , [2] | string | float32, float64 ------------------------------------------------------------------------------------------------------------------- INTEGER that | int, int8, int16, int32, int64 | string | int, int8, int16, fits in int64 | [1] , [2] | | int32, int64 ------------------------------------------------------------------------------------------------------------------- INTEGER that doesn't | int, int8, int16, int32, int64, *big.Int | string | error fit in int64 | [1] , [2] , [3] , [4] | ------------------------------------------------------------------------------------------------------------------- NUMBER(P, S) | float32, float64, *big.Float | string | float32, float64 where S > 0 | [1] , [2] , [3] , [5] | ------------------------------------------------------------------------------------------------------------------- DATE | time.Time | string | time.Time ------------------------------------------------------------------------------------------------------------------- TIME | time.Time | string | time.Time ------------------------------------------------------------------------------------------------------------------- TIMESTAMP_LTZ | time.Time | string | time.Time ------------------------------------------------------------------------------------------------------------------- TIMESTAMP_NTZ | time.Time | string | time.Time ------------------------------------------------------------------------------------------------------------------- TIMESTAMP_TZ | time.Time | string | time.Time ------------------------------------------------------------------------------------------------------------------- BINARY | []byte | string | []byte ------------------------------------------------------------------------------------------------------------------- ARRAY [6] | string / array | string / array ------------------------------------------------------------------------------------------------------------------- OBJECT [6] | string / struct | string / struct ------------------------------------------------------------------------------------------------------------------- VARIANT | string | string ------------------------------------------------------------------------------------------------------------------- MAP | map | map [1] Converting from a higher precision data type to a lower precision data type via the snowflakeRows.Scan() method can lose low bits (lose precision), lose high bits (completely change the value), or result in error. [2] Attempting to convert from a higher precision data type to a lower precision data type via interface{} causes an error. [3] Higher precision data types like *big.Int and *big.Float can be accessed by querying with a context returned by WithHigherPrecision(). [4] You cannot directly Scan() into the alternative data types via snowflakeRows.Scan(), but can convert to those data types by using .Int64()/.String()/.Uint64() methods. For an example, see below. [5] You cannot directly Scan() into the alternative data types via snowflakeRows.Scan(), but can convert to those data types by using .Float32()/.String()/.Float64() methods. For an example, see below. [6] Arrays and objects can be either semistructured or structured, see more info in section below. Note: SQL NULL values are converted to Golang nil values, and vice-versa. Snowflake supports two flavours of "structured data" - semistructured and structured. Semistructured types are variants, objects and arrays without schema. When data is fetched, it's represented as strings and the client is responsible for its interpretation. Example table definition: The data not have any corresponding schema, so values in table may be slightly different. Semistuctured variants, objects and arrays are always represented as strings for scanning: When inserting, a marker indicating correct type must be used, for example: Structured types differentiate from semistructured types by having specific schema. In all rows of the table, values must conform to this schema. Example table definition: To retrieve structured objects, follow these steps: 1. Create a struct implementing sql.Scanner interface, example: a) b) Automatic scan goes through all fields in a struct and read object fields. Struct fields have to be public. Embedded structs have to be pointers. Matching name is built using struct field name with first letter lowercase. Additionally, `sf` tag can be added: - first value is always a name of a field in an SQL object - additionally `ignore` parameter can be passed to omit this field 2. Use WithStructuredTypesEnabled context while querying data. 3. Use it in regular scan: See StructuredObject for all available operations including null support, embedding nested structs, etc. Retrieving array of simple types works exactly the same like normal values - using Scan function. You can use WithMapValuesNullable and WithArrayValuesNullable contexts to handle null values in, respectively, maps and arrays of simple types in the database. In that case, sql null types will be used: If you want to scan array of structs, you have to use a helper function ScanArrayOfScanners: Retrieving structured maps is very similar to retrieving arrays: To bind structured objects use: 1. Create a type which implements a StructuredObjectWriter interface, example: a) b) 2. Use an instance as regular bind. 3. If you need to bind nil value, use special syntax: Binding structured arrays are like any other parameter. The only difference is - if you want to insert empty array (not nil but empty), you have to use: The following example shows how to retrieve very large values using the math/big package. This example retrieves a large INTEGER value to an interface and then extracts a big.Int value from that interface. If the value fits into an int64, then the code also copies the value to a variable of type int64. Note that a context that enables higher precision must be passed in with the query. If the variable named "rows" is known to contain a big.Int, then you can use the following instead of scanning into an interface and then converting to a big.Int: If the variable named "rows" contains a big.Int, then each of the following fails: Similar code and rules also apply to big.Float values. If you are not sure what data type will be returned, you can use code similar to the following to check the data type of the returned value: You can retrieve data in a columnar format similar to the format a server returns, without transposing them to rows. When working with the arrow columnar format in go driver, ArrowBatch structs are used. These are structs mostly corresponding to data chunks received from the backend. They allow for access to specific arrow.Record structs. An ArrowBatch can exist in a state where the underlying data has not yet been loaded. The data is downloaded and translated only on demand. Translation options are retrieved from a context.Context interface, which is either passed from query context or set by the user using WithContext(ctx) method. In order to access them you must use `WithArrowBatches` context, similar to the following: This returns []*ArrowBatch. ArrowBatch functions: GetRowCount(): Returns the number of rows in the ArrowBatch. Note that this returns 0 if the data has not yet been loaded, irrespective of it’s actual size. WithContext(ctx context.Context): Sets the context of the ArrowBatch to the one provided. Note that the context will not retroactively apply to data that has already been downloaded. For example: will produce the same result in records1 and records2, irrespective of the newly provided ctx. Context worth noting are: -WithArrowBatchesTimestampOption -WithHigherPrecision -WithArrowBatchesUtf8Validation described in more detail later. Fetch(): Returns the underlying records as *[]arrow.Record. When this function is called, the ArrowBatch checks whether the underlying data has already been loaded, and downloads it if not. Limitations: How to handle timestamps in Arrow batches: Snowflake returns timestamps natively (from backend to driver) in multiple formats. The Arrow timestamp is an 8-byte data type, which is insufficient to handle the larger date and time ranges used by Snowflake. Also, Snowflake supports 0-9 (nanosecond) digit precision for seconds, while Arrow supports only 3 (millisecond), 6 (microsecond), an 9 (nanosecond) precision. Consequently, Snowflake uses a custom timestamp format in Arrow, which differs on timestamp type and precision. If you want to use timestamps in Arrow batches, you have two options: How to handle invalid UTF-8 characters in Arrow batches: Snowflake previously allowed users to upload data with invalid UTF-8 characters. Consequently, Arrow records containing string columns in Snowflake could include these invalid UTF-8 characters. However, according to the Arrow specifications (https://arrow.apache.org/docs/cpp/api/datatype.html and https://github.com/apache/arrow/blob/a03d957b5b8d0425f9d5b6c98b6ee1efa56a1248/go/arrow/datatype.go#L73-L74), Arrow string columns should only contain UTF-8 characters. To address this issue and prevent potential downstream disruptions, the context WithArrowBatchesUtf8Validation, is introduced. When enabled, this feature iterates through all values in string columns, identifying and replacing any invalid characters with `�`. This ensures that Arrow records conform to the UTF-8 standards, preventing validation failures in downstream services like the Rust Arrow library that impose strict validation checks. How to handle higher precision in Arrow batches: To preserve BigDecimal values within Arrow batches, use WithHigherPrecision. This offers two main benefits: it helps avoid precision loss and defers the conversion to upstream services. Alternatively, without this setting, all non-zero scale numbers will be converted to float64, potentially resulting in loss of precision. Zero-scale numbers (DECIMAL256, DECIMAL128) will be converted to int64, which could lead to overflow. Binding allows a SQL statement to use a value that is stored in a Golang variable. Without binding, a SQL statement specifies values by specifying literals inside the statement. For example, the following statement uses the literal value “42“ in an UPDATE statement: With binding, you can execute a SQL statement that uses a value that is inside a variable. For example: The “?“ inside the “VALUES“ clause specifies that the SQL statement uses the value from a variable. Binding data that involves time zones can require special handling. For details, see the section titled "Timestamps with Time Zones". Version 1.6.23 (and later) of the driver takes advantage of sql.Null types which enables the proper handling of null parameters inside function calls, i.e.: The timestamp nullability had to be achieved by wrapping the sql.NullTime type as the Snowflake provides several date and time types which are mapped to single Go time.Time type: Version 1.3.9 (and later) of the Go Snowflake Driver supports the ability to bind an array variable to a parameter in a SQL INSERT statement. You can use this technique to insert multiple rows in a single batch. As an example, the following code inserts rows into a table that contains integer, float, boolean, and string columns. The example binds arrays to the parameters in the INSERT statement. If the array contains SQL NULL values, use slice []interface{}, which allows Golang nil values. This feature is available in version 1.6.12 (and later) of the driver. For example, For slices []interface{} containing time.Time values, a binding parameter flag is required for the preceding array variable in the Array() function. This feature is available in version 1.6.13 (and later) of the driver. For example, Note: For alternative ways to load data into the Snowflake database (including bulk loading using the COPY command), see Loading Data into Snowflake (https://docs.snowflake.com/en/user-guide-data-load.html). When you use array binding to insert a large number of values, the driver can improve performance by streaming the data (without creating files on the local machine) to a temporary stage for ingestion. The driver automatically does this when the number of values exceeds a threshold (no changes are needed to user code). In order for the driver to send the data to a temporary stage, the user must have the following privilege on the schema: If the user does not have this privilege, the driver falls back to sending the data with the query to the Snowflake database. In addition, the current database and schema for the session must be set. If these are not set, the CREATE TEMPORARY STAGE command executed by the driver can fail with the following error: For alternative ways to load data into the Snowflake database (including bulk loading using the COPY command), see Loading Data into Snowflake (https://docs.snowflake.com/en/user-guide-data-load.html). Go's database/sql package supports the ability to bind a parameter in a SQL statement to a time.Time variable. However, when the client binds data to send to the server, the driver cannot determine the correct Snowflake date/timestamp data type to associate with the binding parameter. For example: To resolve this issue, a binding parameter flag is introduced that associates any subsequent time.Time type to the DATE, TIME, TIMESTAMP_LTZ, TIMESTAMP_NTZ or BINARY data type. The above example could be rewritten as follows: The driver fetches TIMESTAMP_TZ (timestamp with time zone) data using the offset-based Location types, which represent a collection of time offsets in use in a geographical area, such as CET (Central European Time) or UTC (Coordinated Universal Time). The offset-based Location data is generated and cached when a Go Snowflake Driver application starts, and if the given offset is not in the cache, it is generated dynamically. Currently, Snowflake does not support the name-based Location types (e.g. "America/Los_Angeles"). For more information about Location types, see the Go documentation for https://golang.org/pkg/time/#Location. Internally, this feature leverages the []byte data type. As a result, BINARY data cannot be bound without the binding parameter flag. In the following example, sf is an alias for the gosnowflake package: The driver directly downloads a result set from the cloud storage if the size is large. It is required to shift workloads from the Snowflake database to the clients for scale. The download takes place by goroutine named "Chunk Downloader" asynchronously so that the driver can fetch the next result set while the application can consume the current result set. The application may change the number of result set chunk downloader if required. Note this does not help reduce memory footprint by itself. Consider Custom JSON Decoder. Custom JSON Decoder for Parsing Result Set (Experimental) The application may have the driver use a custom JSON decoder that incrementally parses the result set as follows. This option will reduce the memory footprint to half or even quarter, but it can significantly degrade the performance depending on the environment. The test cases running on Travis Ubuntu box show five times less memory footprint while four times slower. Be cautious when using the option. The Go Snowflake Driver supports JWT (JSON Web Token) authentication. To enable this feature, construct the DSN with fields "authenticator=SNOWFLAKE_JWT&privateKey=<your_private_key>", or using a Config structure specifying: The <your_private_key> should be a base64 URL encoded PKCS8 rsa private key string. One way to encode a byte slice to URL base 64 URL format is through the base64.URLEncoding.EncodeToString() function. On the server side, you can alter the public key with the SQL command: The <your_public_key> should be a base64 Standard encoded PKI public key string. One way to encode a byte slice to base 64 Standard format is through the base64.StdEncoding.EncodeToString() function. To generate the valid key pair, you can execute the following commands in the shell: Note: As of February 2020, Golang's official library does not support passcode-encrypted PKCS8 private key. For security purposes, Snowflake highly recommends that you store the passcode-encrypted private key on the disk and decrypt the key in your application using a library you trust. JWT tokens are recreated on each retry and they are valid (`exp` claim) for `jwtTimeout` seconds. Each retry timeout is configured by `jwtClientTimeout`. Retries are limited by total time of `loginTimeout`. The driver allows to authenticate using the external browser. When a connection is created, the driver will open the browser window and ask the user to sign in. To enable this feature, construct the DSN with field "authenticator=EXTERNALBROWSER" or using a Config structure with following Authenticator specified: The external browser authentication implements timeout mechanism. This prevents the driver from hanging interminably when browser window was closed, or not responding. Timeout defaults to 120s and can be changed through setting DSN field "externalBrowserTimeout=240" (time in seconds) or using a Config structure with following ExternalBrowserTimeout specified: This feature is available in version 1.3.8 or later of the driver. By default, Snowflake returns an error for queries issued with multiple statements. This restriction helps protect against SQL Injection attacks (https://en.wikipedia.org/wiki/SQL_injection). The multi-statement feature allows users skip this restriction and execute multiple SQL statements through a single Golang function call. However, this opens up the possibility for SQL injection, so it should be used carefully. The risk can be reduced by specifying the exact number of statements to be executed, which makes it more difficult to inject a statement by appending it. More details are below. The Go Snowflake Driver provides two functions that can execute multiple SQL statements in a single call: To compose a multi-statement query, simply create a string that contains all the queries, separated by semicolons, in the order in which the statements should be executed. To protect against SQL Injection attacks while using the multi-statement feature, pass a Context that specifies the number of statements in the string. For example: When multiple queries are executed by a single call to QueryContext(), multiple result sets are returned. After you process the first result set, get the next result set (for the next SQL statement) by calling NextResultSet(). The following pseudo-code shows how to process multiple result sets: The function db.ExecContext() returns a single result, which is the sum of the number of rows changed by each individual statement. For example, if your multi-statement query executed two UPDATE statements, each of which updated 10 rows, then the result returned would be 20. Individual row counts for individual statements are not available. The following code shows how to retrieve the result of a multi-statement query executed through db.ExecContext(): Note: Because a multi-statement ExecContext() returns a single value, you cannot detect offsetting errors. For example, suppose you expected the return value to be 20 because you expected each UPDATE statement to update 10 rows. If one UPDATE statement updated 15 rows and the other UPDATE statement updated only 5 rows, the total would still be 20. You would see no indication that the UPDATES had not functioned as expected. The ExecContext() function does not return an error if passed a query (e.g. a SELECT statement). However, it still returns only a single value, not a result set, so using it to execute queries (or a mix of queries and non-query statements) is impractical. The QueryContext() function does not return an error if passed non-query statements (e.g. DML). The function returns a result set for each statement, whether or not the statement is a query. For each non-query statement, the result set contains a single row that contains a single column; the value is the number of rows changed by the statement. If you want to execute a mix of query and non-query statements (e.g. a mix of SELECT and DML statements) in a multi-statement query, use QueryContext(). You can retrieve the result sets for the queries, and you can retrieve or ignore the row counts for the non-query statements. Note: PUT statements are not supported for multi-statement queries. If a SQL statement passed to ExecQuery() or QueryContext() fails to compile or execute, that statement is aborted, and subsequent statements are not executed. Any statements prior to the aborted statement are unaffected. For example, if the statements below are run as one multi-statement query, the multi-statement query fails on the third statement, and an exception is thrown. If you then query the contents of the table named "test", the values 1 and 2 would be present. When using the QueryContext() and ExecContext() functions, golang code can check for errors the usual way. For example: Preparing statements and using bind variables are also not supported for multi-statement queries. The Go Snowflake Driver supports asynchronous execution of SQL statements. Asynchronous execution allows you to start executing a statement and then retrieve the result later without being blocked while waiting. While waiting for the result of a SQL statement, you can perform other tasks, including executing other SQL statements. Most of the steps to execute an asynchronous query are the same as the steps to execute a synchronous query. However, there is an additional step, which is that you must call the WithAsyncMode() function to update your Context object to specify that asynchronous mode is enabled. In the code below, the call to "WithAsyncMode()" is specific to asynchronous mode. The rest of the code is compatible with both asynchronous mode and synchronous mode. The function db.QueryContext() returns an object of type snowflakeRows regardless of whether the query is synchronous or asynchronous. However: The call to the Next() function of snowflakeRows is always synchronous (i.e. blocking). If the query has not yet completed and the snowflakeRows object (named "rows" in this example) has not been filled in yet, then rows.Next() waits until the result set has been filled in. More generally, calls to any Golang SQL API function implemented in snowflakeRows or snowflakeResult are blocking calls, and wait if results are not yet available. (Examples of other synchronous calls include: snowflakeRows.Err(), snowflakeRows.Columns(), snowflakeRows.columnTypes(), snowflakeRows.Scan(), and snowflakeResult.RowsAffected().) Because the example code above executes only one query and no other activity, there is no significant difference in behavior between asynchronous and synchronous behavior. The differences become significant if, for example, you want to perform some other activity after the query starts and before it completes. The example code below starts a query, which run in the background, and then retrieves the results later. This example uses small SELECT statements that do not retrieve enough data to require asynchronous handling. However, the technique works for larger data sets, and for situations where the programmer might want to do other work after starting the queries and before retrieving the results. For a more elaborative example please see cmd/async/async.go The Go Snowflake Driver supports the PUT and GET commands. The PUT command copies a file from a local computer (the computer where the Golang client is running) to a stage on the cloud platform. The GET command copies data files from a stage on the cloud platform to a local computer. See the following for information on the syntax and supported parameters: Using PUT: The following example shows how to run a PUT command by passing a string to the db.Query() function: "<local_file>" should include the file path as well as the name. Snowflake recommends using an absolute path rather than a relative path. For example: Different client platforms (e.g. linux, Windows) have different path name conventions. Ensure that you specify path names appropriately. This is particularly important on Windows, which uses the backslash character as both an escape character and as a separator in path names. To send information from a stream (rather than a file) use code similar to the code below. (The ReplaceAll() function is needed on Windows to handle backslashes in the path to the file.) Note: PUT statements are not supported for multi-statement queries. Using GET: The following example shows how to run a GET command by passing a string to the db.Query() function: "<local_file>" should include the file path as well as the name. Snowflake recommends using an absolute path rather than a relative path. For example: To download a file into an in-memory stream (rather than a file) use code similar to the code below. Note: GET statements are not supported for multi-statement queries. Specifying temporary directory for encryption and compression: Putting and getting requires compression and/or encryption, which is done in the OS temporary directory. If you cannot use default temporary directory for your OS or you want to specify it yourself, you can use "tmpDirPath" DSN parameter. Remember, to encode slashes. Example: Using custom configuration for PUT/GET: If you want to override some default configuration options, you can use `WithFileTransferOptions` context. There are multiple config parameters including progress bars or compression.

Package resourcegroups provides the API client, operations, and parameter types for AWS Resource Groups. Resource Groups lets you organize Amazon Web Services resources such as Amazon Elastic Compute Cloud instances, Amazon Relational Database Service databases, and Amazon Simple Storage Service buckets into groups using criteria that you define as tags. A resource group is a collection of resources that match the resource types specified in a query, and share one or more tags or portions of tags. You can create a group of resources based on their roles in your cloud infrastructure, lifecycle stages, regions, application layers, or virtually any criteria. Resource Groups enable you to automate management tasks, such as those in Amazon Web Services Systems Manager Automation documents, on tag-related resources in Amazon Web Services Systems Manager. Groups of tagged resources also let you quickly view a custom console in Amazon Web Services Systems Manager that shows Config compliance and other monitoring data about member resources. To create a resource group, build a resource query, and specify tags that identify the criteria that members of the group have in common. Tags are key-value pairs. For more information about Resource Groups, see the Resource Groups User Guide. Resource Groups uses a REST-compliant API that you can use to perform the following types of operations. Create, Read, Update, and Delete (CRUD) operations on resource groups and resource query entities Applying, editing, and removing tags from resource groups Resolving resource group member Amazon resource names (ARN)s so they can be returned as search results Getting data about resources that are members of a group Searching Amazon Web Services resources based on a resource query

Package enmime implements a MIME encoding and decoding library. It's built on top of Go's included mime/multipart support where possible, but is geared towards parsing MIME encoded emails. The enmime API has two conceptual layers. The lower layer is a tree of Part structs, representing each component of a decoded MIME message. The upper layer, called an Envelope provides an intuitive way to interact with a MIME message. Calling ReadParts causes enmime to parse the body of a MIME message into a tree of Part objects, each of which is aware of its content type, filename and headers. The content of a Part is available as a slice of bytes via the Content field. If the part was encoded in quoted-printable or base64, it is decoded prior to being placed in Content. If the Part contains text in a character set other than utf-8, enmime will attempt to convert it to utf-8. To locate a particular Part, pass a custom PartMatcher function into the BreadthMatchFirst() or DepthMatchFirst() methods to search the Part tree. BreadthMatchAll() and DepthMatchAll() will collect all Parts matching your criteria. ReadEnvelope returns an Envelope struct. Behind the scenes a Part tree is constructed, and then sorted into the correct fields of the Envelope. The Envelope contains both the plain text and HTML portions of the email. If there was no plain text Part available, the HTML Part will be down-converted using the html2text library1. The root of the Part tree, as well as slices of the inline and attachment Parts are also available. Every MIME Part has its own headers, accessible via the Part.Header field. The raw headers for an Envelope are available in Root.Header. Envelope also provides helper methods to fetch headers: GetHeader(key) will return the RFC 2047 decoded value of the specified header. AddressList(key) will convert the specified address header into a slice of net/mail.Address values. enmime attempts to be tolerant of poorly encoded MIME messages. In situations where parsing is not possible, the ReadEnvelope and ReadParts functions will return a hard error. If enmime is able to continue parsing the message, it will add an entry to the Errors slice on the relevant Part. After parsing is complete, all Part errors will be appended to the Envelope Errors slice. The Error* constants can be used to identify a specific class of error. Please note that enmime parses messages into memory, so it is not likely to perform well with multi-gigabyte attachments. enmime is open source software released under the MIT License. The latest version can be found at https://github.com/jhillyerd/enmime

Package freegeoip provides an API for searching the geolocation of IP addresses. It uses a database that can be either a local file or a remote resource from a URL. Local databases are monitored by fsnotify and reloaded when the file is either updated or overwritten. Remote databases are automatically downloaded and updated in background so you can focus on using the API and not managing the database.

Package resourceexplorer2 provides the API client, operations, and parameter types for AWS Resource Explorer. Amazon Web Services Resource Explorer is a resource search and discovery service. By using Resource Explorer, you can explore your resources using an internet search engine-like experience. Examples of resources include Amazon Relational Database Service (Amazon RDS) instances, Amazon Simple Storage Service (Amazon S3) buckets, or Amazon DynamoDB tables. You can search for your resources using resource metadata like names, tags, and IDs. Resource Explorer can search across all of the Amazon Web Services Regions in your account in which you turn the service on, to simplify your cross-Region workloads. Resource Explorer scans the resources in each of the Amazon Web Services Regions in your Amazon Web Services account in which you turn on Resource Explorer. Resource Explorer creates and maintains an indexin each Region, with the details of that Region's resources. You can search across all of the indexed Regions in your account by designating one of your Amazon Web Services Regions to contain the aggregator index for the account. When you promote a local index in a Region to become the aggregator index for the account, Resource Explorer automatically replicates the index information from all local indexes in the other Regions to the aggregator index. Therefore, the Region with the aggregator index has a copy of all resource information for all Regions in the account where you turned on Resource Explorer. As a result, views in the aggregator index Region include resources from all of the indexed Regions in your account. For more information about Amazon Web Services Resource Explorer, including how to enable and configure the service, see the Amazon Web Services Resource Explorer User Guide.

Package oam provides the API client, operations, and parameter types for CloudWatch Observability Access Manager. Use Amazon CloudWatch Observability Access Manager to create and manage links between source accounts and monitoring accounts by using CloudWatch cross-account observability. With CloudWatch cross-account observability, you can monitor and troubleshoot applications that span multiple accounts within a Region. Seamlessly search, visualize, and analyze your metrics, logs, traces, and Application Insights applications in any of the linked accounts without account boundaries. Set up one or more Amazon Web Services accounts as monitoring accounts and link them with multiple source accounts. A monitoring account is a central Amazon Web Services account that can view and interact with observability data generated from source accounts. A source account is an individual Amazon Web Services account that generates observability data for the resources that reside in it. Source accounts share their observability data with the monitoring account. The shared observability data can include metrics in Amazon CloudWatch, logs in Amazon CloudWatch Logs, traces in X-Ray, and applications in Amazon CloudWatch Application Insights.

Package cloudsearch provides the API client, operations, and parameter types for Amazon CloudSearch. You use the Amazon CloudSearch configuration service to create, configure, and manage search domains. Configuration service requests are submitted using the AWS Query protocol. AWS Query requests are HTTP or HTTPS requests submitted via HTTP GET or POST with a query parameter named Action. The endpoint for configuration service requests is region-specific: cloudsearch.region.amazonaws.com. For example, cloudsearch.us-east-1.amazonaws.com. For a current list of supported regions and endpoints, see Regions and Endpoints.

Package opensearchserverless provides the API client, operations, and parameter types for OpenSearch Service Serverless. Use the Amazon OpenSearch Serverless API to create, configure, and manage OpenSearch Serverless collections and security policies. OpenSearch Serverless is an on-demand, pre-provisioned serverless configuration for Amazon OpenSearch Service. OpenSearch Serverless removes the operational complexities of provisioning, configuring, and tuning your OpenSearch clusters. It enables you to easily search and analyze petabytes of data without having to worry about the underlying infrastructure and data management. To learn more about OpenSearch Serverless, see What is Amazon OpenSearch Serverless?

Package aw is a "plug-and-play" workflow development library/framework for Alfred 3 & 4 (https://www.alfredapp.com/). It requires Go 1.13 or later. It provides everything you need to create a polished and blazing-fast Alfred frontend for your project. As of AwGo 0.26, all applicable features of Alfred 4.1 are supported. The main features are: AwGo is an opinionated framework that expects to be used in a certain way in order to eliminate boilerplate. It *will* panic if not run in a valid, minimally Alfred-like environment. At a minimum the following environment variables should be set to meaningful values: NOTE: AwGo is currently in development. The API *will* change and should not be considered stable until v1.0. Until then, be sure to pin a version using go modules or similar. Be sure to also check out the _examples/ subdirectory, which contains some simple, but complete, workflows that demonstrate the features of AwGo and useful workflow idioms. Typically, you'd call your program's main entry point via Workflow.Run(). This way, the library will rescue any panic, log the stack trace and show an error message to the user in Alfred. In the Script box (Language = "/bin/bash"): To generate results for Alfred to show in a Script Filter, use the feedback API of Workflow: You can set workflow variables (via feedback) with Workflow.Var, Item.Var and Modifier.Var. See Workflow.SendFeedback for more documentation. Alfred requires a different JSON format if you wish to set workflow variables. Use the ArgVars (named for its equivalent element in Alfred) struct to generate output from Run Script actions. Be sure to set TextErrors to true to prevent Workflow from generating Alfred JSON if it catches a panic: See ArgVars for more information. New() creates a *Workflow using the default values and workflow settings read from environment variables set by Alfred. You can change defaults by passing one or more Options to New(). If you do not want to use Alfred's environment variables, or they aren't set (i.e. you're not running the code in Alfred), use NewFromEnv() with a custom Env implementation. A Workflow can be re-configured later using its Configure() method. See the documentation for Option for more information on configuring a Workflow. AwGo can check for and install new versions of your workflow. Subpackage update provides an implementation of the Updater interface and sources to load updates from GitHub or Gitea releases, or from the URL of an Alfred `metadata.json` file. See subpackage update and _examples/update. AwGo can filter Script Filter feedback using a Sublime Text-like fuzzy matching algorithm. Workflow.Filter() sorts feedback Items against the provided query, removing those that do not match. See _examples/fuzzy for a basic demonstration, and _examples/bookmarks for a demonstration of implementing fuzzy.Sortable on your own structs and customising the fuzzy sort settings. Fuzzy matching is done by package https://godoc.org/go.deanishe.net/fuzzy AwGo automatically configures the default log package to write to STDERR (Alfred's debugger) and a log file in the workflow's cache directory. The log file is necessary because background processes aren't connected to Alfred, so their output is only visible in the log. It is rotated when it exceeds 1 MiB in size. One previous log is kept. AwGo detects when Alfred's debugger is open (Workflow.Debug() returns true) and in this case prepends filename:linenumber: to log messages. The Config struct (which is included in Workflow as Workflow.Config) provides an interface to the workflow's settings from the Workflow Environment Variables panel (see https://www.alfredapp.com/help/workflows/advanced/variables/#environment). Alfred exports these settings as environment variables, and you can read them ad-hoc with the Config.Get*() methods, and save values back to Alfred/info.plist with Config.Set(). Using Config.To() and Config.From(), you can "bind" your own structs to the settings in Alfred: See the documentation for Config.To and Config.From for more information, and _examples/settings for a demo workflow based on the API. The Alfred struct provides methods for the rest of Alfred's AppleScript API. Amongst other things, you can use it to tell Alfred to open, to search for a query, to browse/action files & directories, or to run External Triggers. See documentation of the Alfred struct for more information. AwGo provides a basic, but useful, API for loading and saving data. In addition to reading/writing bytes and marshalling/unmarshalling to/from JSON, the API can auto-refresh expired cache data. See Cache and Session for the API documentation. Workflow has three caches tied to different directories: These all share (almost) the same API. The difference is in when the data go away. Data saved with Session are deleted after the user closes Alfred or starts using a different workflow. The Cache directory is in a system cache directory, so may be deleted by the system or "system maintenance" tools. The Data directory lives with Alfred's application data and would not normally be deleted. Subpackage util provides several functions for running script files and snippets of AppleScript/JavaScript code. See util for documentation and examples. AwGo offers a simple API to start/stop background processes via Workflow's RunInBackground(), IsRunning() and Kill() methods. This is useful for running checks for updates and other jobs that hit the network or take a significant amount of time to complete, allowing you to keep your Script Filters extremely responsive. See _examples/update and _examples/workflows for demonstrations of this API.

Package lingua accurately detects the natural language of written text, be it long or short. Its task is simple: It tells you which language some text is written in. This is very useful as a preprocessing step for linguistic data in natural language processing applications such as text classification and spell checking. Other use cases, for instance, might include routing e-mails to the right geographically located customer service department, based on the e-mails' languages. Language detection is often done as part of large machine learning frameworks or natural language processing applications. In cases where you don't need the full-fledged functionality of those systems or don't want to learn the ropes of those, a small flexible library comes in handy. So far, the only other comprehensive open source library in the Go ecosystem for this task is Whatlanggo (https://github.com/abadojack/whatlanggo). Unfortunately, it has two major drawbacks: 1. Detection only works with quite lengthy text fragments. For very short text snippets such as Twitter messages, it does not provide adequate results. 2. The more languages take part in the decision process, the less accurate are the detection results. Lingua aims at eliminating these problems. It nearly does not need any configuration and yields pretty accurate results on both long and short text, even on single words and phrases. It draws on both rule-based and statistical methods but does not use any dictionaries of words. It does not need a connection to any external API or service either. Once the library has been downloaded, it can be used completely offline. Compared to other language detection libraries, Lingua's focus is on quality over quantity, that is, getting detection right for a small set of languages first before adding new ones. Currently, 75 languages are supported. They are listed as variants of type Language. Lingua is able to report accuracy statistics for some bundled test data available for each supported language. The test data for each language is split into three parts: 1. a list of single words with a minimum length of 5 characters 2. a list of word pairs with a minimum length of 10 characters 3. a list of complete grammatical sentences of various lengths Both the language models and the test data have been created from separate documents of the Wortschatz corpora (https://wortschatz.uni-leipzig.de) offered by Leipzig University, Germany. Data crawled from various news websites have been used for training, each corpus comprising one million sentences. For testing, corpora made of arbitrarily chosen websites have been used, each comprising ten thousand sentences. From each test corpus, a random unsorted subset of 1000 single words, 1000 word pairs and 1000 sentences has been extracted, respectively. Given the generated test data, I have compared the detection results of Lingua, and Whatlanggo running over the data of Lingua's supported 75 languages. Additionally, I have added Google's CLD3 (https://github.com/google/cld3/) to the comparison with the help of the gocld3 bindings (https://github.com/jmhodges/gocld3). Languages that are not supported by CLD3 or Whatlanggo are simply ignored during the detection process. Lingua clearly outperforms its contenders. Every language detector uses a probabilistic n-gram (https://en.wikipedia.org/wiki/N-gram) model trained on the character distribution in some training corpus. Most libraries only use n-grams of size 3 (trigrams) which is satisfactory for detecting the language of longer text fragments consisting of multiple sentences. For short phrases or single words, however, trigrams are not enough. The shorter the input text is, the less n-grams are available. The probabilities estimated from such few n-grams are not reliable. This is why Lingua makes use of n-grams of sizes 1 up to 5 which results in much more accurate prediction of the correct language. A second important difference is that Lingua does not only use such a statistical model, but also a rule-based engine. This engine first determines the alphabet of the input text and searches for characters which are unique in one or more languages. If exactly one language can be reliably chosen this way, the statistical model is not necessary anymore. In any case, the rule-based engine filters out languages that do not satisfy the conditions of the input text. Only then, in a second step, the probabilistic n-gram model is taken into consideration. This makes sense because loading less language models means less memory consumption and better runtime performance. In general, it is always a good idea to restrict the set of languages to be considered in the classification process using the respective api methods. If you know beforehand that certain languages are never to occur in an input text, do not let those take part in the classifcation process. The filtering mechanism of the rule-based engine is quite good, however, filtering based on your own knowledge of the input text is always preferable. There might be classification tasks where you know beforehand that your language data is definitely not written in Latin, for instance. The detection accuracy can become better in such cases if you exclude certain languages from the decision process or just explicitly include relevant languages. Knowing about the most likely language is nice but how reliable is the computed likelihood? And how less likely are the other examined languages in comparison to the most likely one? In the example below, a slice of ConfidenceValue is returned containing those languages which the calling instance of LanguageDetector has been built from. The entries are sorted by their confidence value in descending order. Each value is a probability between 0.0 and 1.0. The probabilities of all languages will sum to 1.0. If the language is unambiguously identified by the rule engine, the value 1.0 will always be returned for this language. The other languages will receive a value of 0.0. By default, Lingua uses lazy-loading to load only those language models on demand which are considered relevant by the rule-based filter engine. For web services, for instance, it is rather beneficial to preload all language models into memory to avoid unexpected latency while waiting for the service response. If you want to enable the eager-loading mode, you can do it as seen below. Multiple instances of LanguageDetector share the same language models in memory which are accessed asynchronously by the instances. By default, Lingua returns the most likely language for a given input text. However, there are certain words that are spelled the same in more than one language. The word `prologue`, for instance, is both a valid English and French word. Lingua would output either English or French which might be wrong in the given context. For cases like that, it is possible to specify a minimum relative distance that the logarithmized and summed up probabilities for each possible language have to satisfy. It can be stated as seen below. Be aware that the distance between the language probabilities is dependent on the length of the input text. The longer the input text, the larger the distance between the languages. So if you want to classify very short text phrases, do not set the minimum relative distance too high. Otherwise Unknown will be returned most of the time as in the example below. This is the return value for cases where language detection is not reliably possible.

Package esquery provides a non-obtrusive, idiomatic and easy-to-use query and aggregation builder for the official Go client (https://github.com/elastic/go-elasticsearch) for the ElasticSearch database (https://www.elastic.co/products/elasticsearch). esquery alleviates the need to use extremely nested maps (map[string]interface{}) and serializing queries to JSON manually. It also helps eliminating common mistakes such as misspelling query types, as everything is statically typed. Using `esquery` can make your code much easier to write, read and maintain, and significantly reduce the amount of code you write. esquery provides a method chaining-style API for building and executing queries and aggregations. It does not wrap the official Go client nor does it require you to change your existing code in order to integrate the library. Queries can be directly built with `esquery`, and executed by passing an `*elasticsearch.Client` instance (with optional search parameters). Results are returned as-is from the official client (e.g. `*esapi.Response` objects). Getting started is extremely simple: esquery currently supports version 7 of the ElasticSearch Go client. The library cannot currently generate "short queries". For example, whereas ElasticSearch can accept this: { "query": { "term": { "user": "Kimchy" } } } The library will always generate this: This is also true for queries such as "bool", where fields like "must" can either receive one query object, or an array of query objects. `esquery` will generate an array even if there's only one query object.

Package errors provides simple error handling primitives. The traditional error handling idiom in Go is roughly akin to which applied recursively up the call stack results in error reports without context or debugging information. The errors package allows programmers to add context to the failure path in their code in a way that does not destroy the original value of the error. The errors.Annotate function returns a new error that adds context to the original error by recording a stack trace at the point Annotate is called, and the supplied message. For example If additional control is required the errors.AddStack and errors.WithMessage functions destructure errors.Annotate into its component operations of annotating an error with a stack trace and an a message, respectively. Using errors.Annotate constructs a stack of errors, adding context to the preceding error. Depending on the nature of the error it may be necessary to reverse the operation of errors.Annotate to retrieve the original error for inspection. Any error value which implements this interface can be inspected by errors.Cause. errors.Cause will recursively retrieve the topmost error which does not implement causer, which is assumed to be the original cause. For example: causer interface is not exported by this package, but is considered a part of stable public API. errors.Unwrap is also available: this will retrieve the next error in the chain. All error values returned from this package implement fmt.Formatter and can be formatted by the fmt package. The following verbs are supported New, Errorf, Annotate, and Annotatef record a stack trace at the point they are invoked. This information can be retrieved with the StackTracer interface that returns a StackTrace. Where errors.StackTrace is defined as The Frame type represents a call site in the stack trace. Frame supports the fmt.Formatter interface that can be used for printing information about the stack trace of this error. For example: See the documentation for Frame.Format for more details. errors.Find can be used to search for an error in the error chain.

Package SQLittle provides pure Go, read-only, access to SQLite (version 3) database files. SQLittle reads SQLite3 tables and indexes. It iterates over tables, and can search efficiently using indexes. SQLittle will deal with all SQLite storage quirks, but otherwise it doesn't try to be smart; if you want to use an index you have to give the name of the index. There is no support for SQL, and if you want to do the most efficient joins possible you'll have to use the low level code. Based on https://sqlite.org/fileformat2.html and some SQLite source code reading. This whole thing is mostly for fun. The normal SQLite libraries are perfectly great, and there is no real need for this. However, since this library is pure Go cross-compilation is much easier. Given the constraints a valid use-case would for example be storing app configuration in read-only sqlite files. https://godoc.org/github.com/alicebob/sqlittle for the go doc and examples. See [LOWLEVEL.md](LOWLEVEL.md) about the low level reader. See [CODE.md](CODE.md) for an overview how the code is structured. Things SQLittle can do: Things SQLittle should do: Things SQLittle can not do: SQLittle has a read-lock on the file during the whole execution of the select-like functions. It's safe to update the database using SQLite while the file is opened in SQLittle. The current level of abstraction is likely the final one (that is: deal with reading single tables; don't even try joins or SQL or query planning), but the API might still change.

Package serverlessapplicationrepository provides the API client, operations, and parameter types for AWSServerlessApplicationRepository. The AWS Serverless Application Repository makes it easy for developers and enterprises to quickly find and deploy serverless applications in the AWS Cloud. For more information about serverless applications, see Serverless Computing and Applications on the AWS website. The AWS Serverless Application Repository is deeply integrated with the AWS Lambda console, so that developers of all levels can get started with serverless computing without needing to learn anything new. You can use category keywords to browse for applications such as web and mobile backends, data processing applications, or chatbots. You can also search for applications by name, publisher, or event source. To use an application, you simply choose it, configure any required fields, and deploy it with a few clicks. You can also easily publish applications, sharing them publicly with the community at large, or privately within your team or across your organization. To publish a serverless application (or app), you can use the AWS Management Console, AWS Command Line Interface (AWS CLI), or AWS SDKs to upload the code. Along with the code, you upload a simple manifest file, also known as the AWS Serverless Application Model (AWS SAM) template. For more information about AWS SAM, see AWS Serverless Application Model (AWS SAM) on the AWS Labs GitHub repository. The AWS Serverless Application Repository Developer Guide contains more information about the two developer experiences available: Publishing Applications – Configure and upload applications to make them

Package seekret provides a framework to create tools to inspect information looking for sensitive information like passwords, tokens, private keys, certificates, etc. The current trend of automation of all things and de DevOps culture are very beneficial for efficiency but also come with several problems, being one of them the secret provisioning. Bootstrapping secrets into systems and applications may be complicated and sometimes the straightforward way is to store them into a insecure storage, like github repository, embedded into an artifact or system image, etc. That means that an AWS secret_key end up into a Github repository. Seekret is an extensible framework that gelps in creating tools for detecting secrets on different sources. The secrets to detect are defined by a set of rules that can help detect passwords, tokens, private keys, certificates, etc. Seekret is extensible and can cover various use cases. Below there are some tools that uses seekret: Seekret API is very simple and easy to use. This section shows some snippets of code that shows the basic operations you can do with it. The first thing to be done is to create a new Seekret context: Then the rules must to be loaded. They can be loaded from a path definition, a directory or a single file: Optionally, exceptions (or false positives) can also be loaded from a file: After that, must be loaded the objects to be inspected searching for secrets. sourceType is an interface that implements the interface shown below. We offer sourceType's for Directories and Git Repositories, but you are able to extend it by creating your own. Currently, there are the following different sources supported: Having all the rules, exceptions and objects loaded into the contects, it's possible to start the inspection with the following code: Nworkers is an integuer that specify the number of goroutines used on the inspection. The recommended value is runtime.NumCPU(). Finally, it is possible to obtain the list of secrets located and do something with them:

Package freegeoip provides an API for searching the geolocation of IP addresses. It uses a database that can be either a local file or a remote resource from a URL. Local databases are monitored by fsnotify and reloaded when the file is either updated or overwritten. Remote databases are automatically downloaded and updated in background so you can focus on using the API and not managing the database.

Package turtle is a library for working with emojis. The API ca be used to retrieve emoji for a specific name, a category or a keyword. You can also search emojis if you do not know the name of an emoji.

Package osdb is an API client for opensubtitles.org This is a client for the OSDb protocol. Currently the package only allows movie identification, subtitles search, and download.

Package testerator is TEST execution accelERATOR for GoogleAppEngine/Go starndard environment. When you call the `aetest.NewInstance`, dev_appserver.py will spinup every time. This is very high cost operation. Testerator compress the time of dev_appserver.py operation. following code launch dev server. It's slow (~4s). testerator wrapped devserver spinup. for example. If you want to clean up Datastore or Search API or Memcache, You should import above packages.

Package cloudsearchdomain provides the API client, operations, and parameter types for Amazon CloudSearch Domain. You use the AmazonCloudSearch2013 API to upload documents to a search domain and search those documents. The endpoints for submitting UploadDocuments , Search , and Suggest requests are domain-specific. To get the endpoints for your domain, use the Amazon CloudSearch configuration service DescribeDomains action. The domain endpoints are also displayed on the domain dashboard in the Amazon CloudSearch console. You submit suggest requests to the search endpoint. For more information, see the Amazon CloudSearch Developer Guide.

Package imdb implements IMDb web API. All operations require an http client such as: To search a title: results is a slice of imdb.Title results with basic information (Name, URL, Year). To get detailed information on a title: Actors, Rating, Description and other fields are available.

Package radixtree implements an Adaptive Radix Tree, aka compressed trie or compact prefix tree. It is adaptive in the sense that nodes are not constant size, having as few or many children as needed to branch to all subtrees. This package implements a radix-256 tree where each key symbol (radix) is a byte, allowing up to 256 possible branches to traverse to the next node. The implementation is optimized for read performance and allocates zero bytes of heap memory for read oprations. Once the radix tree is built, it can be repeatedly searched quickly. Concurrent searches are safe since these do not modify the radixtree. Access is not synchronized (not concurrent safe with writes), allowing the caller to synchronize, if needed, in whatever manner works best for the application. The API uses string keys, since strings are immutable and therefore it is not necessary make a copy of the key provided to the radix tree.

Package CloudForest implements ensembles of decision trees for machine learning in pure Go (golang to search engines). It allows for a number of related algorithms for classification, regression, feature selection and structure analysis on heterogeneous numerical/categorical data with missing values. These include: Breiman and Cutler's Random Forest for Classification and Regression Adaptive Boosting (AdaBoost) Classification Gradiant Boosting Tree Regression Entropy and Cost driven classification L1 regression Feature selection with artificial contrasts Proximity and model structure analysis Roughly balanced bagging for unbalanced classification The API hasn't stabilized yet and may change rapidly. Tests and benchmarks have been performed only on embargoed data sets and can not yet be released. Library Documentation is in code and can be viewed with godoc or live at: http://godoc.org/github.com/ryanbressler/CloudForest Documentation of command line utilities and file formats can be found in README.md, which can be viewed fromated on github: http://github.com/ryanbressler/CloudForest Pull requests and bug reports are welcome. CloudForest was created by Ryan Bressler and is being developed in the Shumelivich Lab at the Institute for Systems Biology for use on genomic/biomedical data with partial support from The Cancer Genome Atlas and the Inova Translational Medicine Institute. CloudForest is intended to provide fast, comprehensible building blocks that can be used to implement ensembles of decision trees. CloudForest is written in Go to allow a data scientist to develop and scale new models and analysis quickly instead of having to modify complex legacy code. Data structures and file formats are chosen with use in multi threaded and cluster environments in mind. Go's support for function types is used to provide a interface to run code as data is percolated through a tree. This method is flexible enough that it can extend the tree being analyzed. Growing a decision tree using Breiman and Cutler's method can be done in an anonymous function/closure passed to a tree's root node's Recurse method: This allows a researcher to include whatever additional analysis they need (importance scores, proximity etc) in tree growth. The same Recurse method can also be used to analyze existing forests to tabulate scores or extract structure. Utilities like leafcount and errorrate use this method to tabulate data about the tree in collection objects. Decision tree's are grown with the goal of reducing "Impurity" which is usually defined as Gini Impurity for categorical targets or mean squared error for numerical targets. CloudForest grows trees against the Target interface which allows for alternative definitions of impurity. CloudForest includes several alternative targets: Additional targets can be stacked on top of these target to add boosting functionality: Repeatedly splitting the data and searching for the best split at each node of a decision tree are the most computationally intensive parts of decision tree learning and CloudForest includes optimized code to perform these tasks. Go's slices are used extensively in CloudForest to make it simple to interact with optimized code. Many previous implementations of Random Forest have avoided reallocation by reordering data in place and keeping track of start and end indexes. In go, slices pointing at the same underlying arrays make this sort of optimization transparent. For example a function like: can return left and right slices that point to the same underlying array as the original slice of cases but these slices should not have their values changed. Functions used while searching for the best split also accepts pointers to reusable slices and structs to maximize speed by keeping memory allocations to a minimum. BestSplitAllocs contains pointers to these items and its use can be seen in functions like: For categorical predictors, BestSplit will also attempt to intelligently choose between 4 different implementations depending on user input and the number of categories. These include exhaustive, random, and iterative searches for the best combination of categories implemented with bitwise operations against int and big.Int. See BestCatSplit, BestCatSplitIter, BestCatSplitBig and BestCatSplitIterBig. All numerical predictors are handled by BestNumSplit which relies on go's sorting package. Training a Random forest is an inherently parallel process and CloudForest is designed to allow parallel implementations that can tackle large problems while keeping memory usage low by writing and using data structures directly to/from disk. Trees can be grown in separate go routines. The growforest utility provides an example of this that uses go routines and channels to grow trees in parallel and write trees to disk as the are finished by the "worker" go routines. The few summary statistics like mean impurity decrease per feature (importance) can be calculated using thread safe data structures like RunningMean. Trees can also be grown on separate machines. The .sf stochastic forest format allows several small forests to be combined by concatenation and the ForestReader and ForestWriter structs allow these forests to be accessed tree by tree (or even node by node) from disk. For data sets that are too big to fit in memory on a single machine Tree.Grow and FeatureMatrix.BestSplitter can be reimplemented to load candidate features from disk, distributed database etc. By default cloud forest uses a fast heuristic for missing values. When proposing a split on a feature with missing data the missing cases are removed and the impurity value is corrected to use three way impurity which reduces the bias towards features with lots of missing data: Missing values in the target variable are left out of impurity calculations. This provided generally good results at a fraction of the computational costs of imputing data. Optionally, feature.ImputeMissing or featurematrixImputeMissing can be called before forest growth to impute missing values to the feature mean/mode which Brieman [2] suggests as a fast method for imputing values. This forest could also be analyzed for proximity (using leafcount or tree.GetLeaves) to do the more accurate proximity weighted imputation Brieman describes. Experimental support is provided for 3 way splitting which splits missing cases onto a third branch. [2] This has so far yielded mixed results in testing. At some point in the future support may be added for local imputing of missing values during tree growth as described in [3] [1] http://www.stat.berkeley.edu/~breiman/RandomForests/cc_home.htm#missing1 [2] https://code.google.com/p/rf-ace/ [3] http://projecteuclid.org/DPubS?verb=Display&version=1.0&service=UI&handle=euclid.aoas/1223908043&page=record In CloudForest data is stored using the FeatureMatrix struct which contains Features. The Feature struct implements storage and methods for both categorical and numerical data and calculations of impurity etc and the search for the best split. The Target interface abstracts the methods of Feature that are needed for a feature to be predictable. This allows for the implementation of alternative types of regression and classification. Trees are built from Nodes and Splitters and stored within a Forest. Tree has a Grow implements Brieman and Cutler's method (see extract above) for growing a tree. A GrowForest method is also provided that implements the rest of the method including sampling cases but it may be faster to grow the forest to disk as in the growforest utility. Prediction and Voting is done using Tree.Vote and CatBallotBox and NumBallotBox which implement the VoteTallyer interface.

Package freegeoip provides an API for searching the geolocation of IP addresses. It uses a database that can be either a local file or a remote resource from a URL. Local databases are monitored by fsnotify and reloaded when the file is either updated or overwritten. Remote databases are automatically downloaded and updated in background so you can focus on using the API and not managing the database.

Package kendraranking provides the API client, operations, and parameter types for Amazon Kendra Intelligent Ranking. Amazon Kendra Intelligent Ranking uses Amazon Kendra semantic search capabilities to intelligently re-rank a search service's results.

Package cloudtraildata provides the API client, operations, and parameter types for AWS CloudTrail Data Service. The CloudTrail Data Service lets you ingest events into CloudTrail from any source in your hybrid environments, such as in-house or SaaS applications hosted on-premises or in the cloud, virtual machines, or containers. You can store, access, analyze, troubleshoot and take action on this data without maintaining multiple log aggregators and reporting tools. After you run PutAuditEvents to ingest your application activity into CloudTrail, you can use CloudTrail Lake to search, query, and analyze the data that is logged from your applications.

Package rod is a high-level driver directly based on DevTools Protocol. This example opens https://github.com/, searches for "git", and then gets the header element which gives the description for Git. Rod use https://golang.org/pkg/context to handle cancellations for IO blocking operations, most times it's timeout. Context will be recursively passed to all sub-methods. For example, methods like Page.Context(ctx) will return a clone of the page with the ctx, all the methods of the returned page will use the ctx if they have IO blocking operations. Page.Timeout or Page.WithCancel is just a shortcut for Page.Context. Of course, Browser or Element works the same way. Shows how we can further customize the browser with the launcher library. Usually you use launcher lib to set the browser's command line flags (switches). Doc for flags: https://peter.sh/experiments/chromium-command-line-switches Shows how to change the retry/polling options that is used to query elements. This is useful when you want to customize the element query retry logic. When rod doesn't have a feature that you need. You can easily call the cdp to achieve it. List of cdp API: https://github.com/go-rod/rod/tree/main/lib/proto Shows how to disable headless mode and debug. Rod provides a lot of debug options, you can set them with setter methods or use environment variables. Doc for environment variables: https://pkg.go.dev/github.com/go-rod/rod/lib/defaults We use "Must" prefixed functions to write example code. But in production you may want to use the no-prefix version of them. About why we use "Must" as the prefix, it's similar to https://golang.org/pkg/regexp/#MustCompile Shows how to share a remote object reference between two Eval. Shows how to listen for events. Shows how to intercept requests and modify both the request and the response. The entire process of hijacking one request: The --req-> and --res-> are the parts that can be modified. Show how to handle multiple results of an action. Such as when you login a page, the result can be success or wrong password. Example_search shows how to use Search to get element inside nested iframes or shadow DOMs. It works the same as https://developers.google.com/web/tools/chrome-devtools/dom#search Shows how to update the state of the current page. In this example we enable the network domain. Rod uses mouse cursor to simulate clicks, so if a button is moving because of animation, the click may not work as expected. We usually use WaitStable to make sure the target isn't changing anymore. When you want to wait for an ajax request to complete, this example will be useful.

Package supportapp provides the API client, operations, and parameter types for AWS Support App. You can use the Amazon Web Services Support App in Slack API to manage your support cases in Slack for your Amazon Web Services account. After you configure your Slack workspace and channel with the Amazon Web Services Support App, you can perform the following tasks directly in your Slack channel: Create, search, update, and resolve your support cases Request service quota increases for your account Invite Amazon Web Services Support agents to your channel so that you can chat directly about your support cases For more information about how to perform these actions in Slack, see the following documentation in the Amazon Web Services Support User Guide: Amazon Web Services Support App in Slack Joining a live chat session with Amazon Web Services Support Requesting service quota increases Amazon Web Services Support App commands in Slack You can also use the Amazon Web Services Management Console instead of the Amazon Web Services Support App API to manage your Slack configurations. For more information, see Authorize a Slack workspace to enable the Amazon Web Services Support App. You must have a Business or Enterprise Support plan to use the Amazon Web Services Support App API. For more information about the Amazon Web Services Support App endpoints, see the Amazon Web Services Support App in Slack endpointsin the Amazon Web Services General Reference.

Package wisdom provides the API client, operations, and parameter types for Amazon Connect Wisdom Service. Amazon Connect Wisdom delivers agents the information they need to solve customer issues as they're actively speaking with customers. Agents can search across connected repositories from within their agent desktop to find answers quickly. Use Amazon Connect Wisdom to create an assistant and a knowledge base, for example, or manage content by uploading custom files.

Package connectcontactlens provides the API client, operations, and parameter types for Amazon Connect Contact Lens. Contact Lens actions Contact Lens data types Amazon Connect Contact Lens enables you to analyze conversations between customer and agents, by using speech transcription, natural language processing, and intelligent search capabilities. It performs sentiment analysis, detects issues, and enables you to automatically categorize contacts. Amazon Connect Contact Lens provides both real-time and post-call analytics of customer-agent conversations. For more information, see Analyze conversations using speech analyticsin the Amazon Connect Administrator Guide.

Package cloudwatchlogs provides the client and types for making API requests to Amazon CloudWatch Logs. You can use Amazon CloudWatch Logs to monitor, store, and access your log files from Amazon EC2 instances, AWS CloudTrail, or other sources. You can then retrieve the associated log data from CloudWatch Logs using the CloudWatch console, CloudWatch Logs commands in the AWS CLI, CloudWatch Logs API, or CloudWatch Logs SDK. You can use CloudWatch Logs to: Monitor logs from EC2 instances in real-time: You can use CloudWatch Logs to monitor applications and systems using log data. For example, CloudWatch Logs can track the number of errors that occur in your application logs and send you a notification whenever the rate of errors exceeds a threshold that you specify. CloudWatch Logs uses your log data for monitoring; so, no code changes are required. For example, you can monitor application logs for specific literal terms (such as "NullReferenceException") or count the number of occurrences of a literal term at a particular position in log data (such as "404" status codes in an Apache access log). When the term you are searching for is found, CloudWatch Logs reports the data to a CloudWatch metric that you specify. Monitor AWS CloudTrail logged events: You can create alarms in CloudWatch and receive notifications of particular API activity as captured by CloudTrail and use the notification to perform troubleshooting. Archive log data: You can use CloudWatch Logs to store your log data in highly durable storage. You can change the log retention setting so that any log events older than this setting are automatically deleted. The CloudWatch Logs agent makes it easy to quickly send both rotated and non-rotated log data off of a host and into the log service. You can then access the raw log data when you need it. See https://docs.aws.amazon.com/goto/WebAPI/logs-2014-03-28 for more information on this service. See cloudwatchlogs package documentation for more information. https://docs.aws.amazon.com/sdk-for-go/api/service/cloudwatchlogs/ To Amazon CloudWatch Logs with the SDK use the New function to create a new service client. With that client you can make API requests to the service. These clients are safe to use concurrently. See the SDK's documentation for more information on how to use the SDK. https://docs.aws.amazon.com/sdk-for-go/api/ See aws.Config documentation for more information on configuring SDK clients. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config See the Amazon CloudWatch Logs client CloudWatchLogs for more information on creating client for this service. https://docs.aws.amazon.com/sdk-for-go/api/service/cloudwatchlogs/#New

Package testerator is TEST execution accelERATOR for GoogleAppEngine/Go starndard environment. When you call the `aetest.NewInstance`, dev_appserver.py will spinup every time. This is very high cost operation. Testerator compress the time of dev_appserver.py operation. following code launch dev server. It's slow (~4s). testerator wrapped devserver spinup. for example. If you want to clean up Datastore or Search API or Memcache, You should import above packages.

Package journald offers Go implementation of systemd Journal's native API for logging. Key features are: Let's look at what the journald provides as Go APIs for logging: The JSON representation of the journal entry this generates: The primary reason for using the Journal's native logging APIs is a not just the source code location however: it is to allow passing additional structured log messages from the program into the journal. This additional log data may the be used to search the journal for, is available for consumption for other programs, and might help the administrator to track down issues beyond what is expressed in the human readable message text. Here's and example how to do that with journals.Send: This will write a log message to the journal much like the earlier examples. However, this times a few additional, structured fields are attached: Our structured message includes six fields. The first thow we passed are well-known fields: 1. MESSAGE= is the actual human readable message part of the structured message. 2. PRIORITY= is the numeric message priority value as known from BSD syslog formatted as an integer string. Applications may relatively freely define additional fields as they see fit (we defined four pretty arbitrary ones in our example). A complete list of the currently well-known fields is available here: https://www.freedesktop.org/software/systemd/man/systemd.journal-fields.html For more details visit https://github.com/ssgreg/journald-send Thanks to http://0pointer.de/blog/ for the inspiration.

Package aw is a "plug-and-play" workflow development library/framework for Alfred 3 & 4 (https://www.alfredapp.com/). It requires Go 1.13 or later. It provides everything you need to create a polished and blazing-fast Alfred frontend for your project. As of AwGo 0.26, all applicable features of Alfred 4.1 are supported. The main features are: AwGo is an opinionated framework that expects to be used in a certain way in order to eliminate boilerplate. It *will* panic if not run in a valid, minimally Alfred-like environment. At a minimum the following environment variables should be set to meaningful values: NOTE: AwGo is currently in development. The API *will* change and should not be considered stable until v1.0. Until then, be sure to pin a version using go modules or similar. Be sure to also check out the _examples/ subdirectory, which contains some simple, but complete, workflows that demonstrate the features of AwGo and useful workflow idioms. Typically, you'd call your program's main entry point via Workflow.Run(). This way, the library will rescue any panic, log the stack trace and show an error message to the user in Alfred. In the Script box (Language = "/bin/bash"): To generate results for Alfred to show in a Script Filter, use the feedback API of Workflow: You can set workflow variables (via feedback) with Workflow.Var, Item.Var and Modifier.Var. See Workflow.SendFeedback for more documentation. Alfred requires a different JSON format if you wish to set workflow variables. Use the ArgVars (named for its equivalent element in Alfred) struct to generate output from Run Script actions. Be sure to set TextErrors to true to prevent Workflow from generating Alfred JSON if it catches a panic: See ArgVars for more information. New() creates a *Workflow using the default values and workflow settings read from environment variables set by Alfred. You can change defaults by passing one or more Options to New(). If you do not want to use Alfred's environment variables, or they aren't set (i.e. you're not running the code in Alfred), use NewFromEnv() with a custom Env implementation. A Workflow can be re-configured later using its Configure() method. See the documentation for Option for more information on configuring a Workflow. AwGo can check for and install new versions of your workflow. Subpackage update provides an implementation of the Updater interface and sources to load updates from GitHub or Gitea releases, or from the URL of an Alfred `metadata.json` file. See subpackage update and _examples/update. AwGo can filter Script Filter feedback using a Sublime Text-like fuzzy matching algorithm. Workflow.Filter() sorts feedback Items against the provided query, removing those that do not match. See _examples/fuzzy for a basic demonstration, and _examples/bookmarks for a demonstration of implementing fuzzy.Sortable on your own structs and customising the fuzzy sort settings. Fuzzy matching is done by package https://godoc.org/go.deanishe.net/fuzzy AwGo automatically configures the default log package to write to STDERR (Alfred's debugger) and a log file in the workflow's cache directory. The log file is necessary because background processes aren't connected to Alfred, so their output is only visible in the log. It is rotated when it exceeds 1 MiB in size. One previous log is kept. AwGo detects when Alfred's debugger is open (Workflow.Debug() returns true) and in this case prepends filename:linenumber: to log messages. The Config struct (which is included in Workflow as Workflow.Config) provides an interface to the workflow's settings from the Workflow Environment Variables panel (see https://www.alfredapp.com/help/workflows/advanced/variables/#environment). Alfred exports these settings as environment variables, and you can read them ad-hoc with the Config.Get*() methods, and save values back to Alfred/info.plist with Config.Set(). Using Config.To() and Config.From(), you can "bind" your own structs to the settings in Alfred: See the documentation for Config.To and Config.From for more information, and _examples/settings for a demo workflow based on the API. The Alfred struct provides methods for the rest of Alfred's AppleScript API. Amongst other things, you can use it to tell Alfred to open, to search for a query, to browse/action files & directories, or to run External Triggers. See documentation of the Alfred struct for more information. AwGo provides a basic, but useful, API for loading and saving data. In addition to reading/writing bytes and marshalling/unmarshalling to/from JSON, the API can auto-refresh expired cache data. See Cache and Session for the API documentation. Workflow has three caches tied to different directories: These all share (almost) the same API. The difference is in when the data go away. Data saved with Session are deleted after the user closes Alfred or starts using a different workflow. The Cache directory is in a system cache directory, so may be deleted by the system or "system maintenance" tools. The Data directory lives with Alfred's application data and would not normally be deleted. Subpackage util provides several functions for running script files and snippets of AppleScript/JavaScript code. See util for documentation and examples. AwGo offers a simple API to start/stop background processes via Workflow's RunInBackground(), IsRunning() and Kill() methods. This is useful for running checks for updates and other jobs that hit the network or take a significant amount of time to complete, allowing you to keep your Script Filters extremely responsive. See _examples/update and _examples/workflows for demonstrations of this API.

Package aw is a "plug-and-play" workflow development library/framework for Alfred 3 & 4 (https://www.alfredapp.com/). It requires Go 1.13 or later. It provides everything you need to create a polished and blazing-fast Alfred frontend for your project. As of AwGo 0.26, all applicable features of Alfred 4.1 are supported. The main features are: AwGo is an opinionated framework that expects to be used in a certain way in order to eliminate boilerplate. It *will* panic if not run in a valid, minimally Alfred-like environment. At a minimum the following environment variables should be set to meaningful values: NOTE: AwGo is currently in development. The API *will* change and should not be considered stable until v1.0. Until then, be sure to pin a version using go modules or similar. Be sure to also check out the _examples/ subdirectory, which contains some simple, but complete, workflows that demonstrate the features of AwGo and useful workflow idioms. Typically, you'd call your program's main entry point via Workflow.Run(). This way, the library will rescue any panic, log the stack trace and show an error message to the user in Alfred. In the Script box (Language = "/bin/bash"): To generate results for Alfred to show in a Script Filter, use the feedback API of Workflow: You can set workflow variables (via feedback) with Workflow.Var, Item.Var and Modifier.Var. See Workflow.SendFeedback for more documentation. Alfred requires a different JSON format if you wish to set workflow variables. Use the ArgVars (named for its equivalent element in Alfred) struct to generate output from Run Script actions. Be sure to set TextErrors to true to prevent Workflow from generating Alfred JSON if it catches a panic: See ArgVars for more information. New() creates a *Workflow using the default values and workflow settings read from environment variables set by Alfred. You can change defaults by passing one or more Options to New(). If you do not want to use Alfred's environment variables, or they aren't set (i.e. you're not running the code in Alfred), use NewFromEnv() with a custom Env implementation. A Workflow can be re-configured later using its Configure() method. See the documentation for Option for more information on configuring a Workflow. AwGo can check for and install new versions of your workflow. Subpackage update provides an implementation of the Updater interface and sources to load updates from GitHub or Gitea releases, or from the URL of an Alfred `metadata.json` file. See subpackage update and _examples/update. AwGo can filter Script Filter feedback using a Sublime Text-like fuzzy matching algorithm. Workflow.Filter() sorts feedback Items against the provided query, removing those that do not match. See _examples/fuzzy for a basic demonstration, and _examples/bookmarks for a demonstration of implementing fuzzy.Sortable on your own structs and customising the fuzzy sort settings. Fuzzy matching is done by package https://godoc.org/go.deanishe.net/fuzzy AwGo automatically configures the default log package to write to STDERR (Alfred's debugger) and a log file in the workflow's cache directory. The log file is necessary because background processes aren't connected to Alfred, so their output is only visible in the log. It is rotated when it exceeds 1 MiB in size. One previous log is kept. AwGo detects when Alfred's debugger is open (Workflow.Debug() returns true) and in this case prepends filename:linenumber: to log messages. The Config struct (which is included in Workflow as Workflow.Config) provides an interface to the workflow's settings from the Workflow Environment Variables panel (see https://www.alfredapp.com/help/workflows/advanced/variables/#environment). Alfred exports these settings as environment variables, and you can read them ad-hoc with the Config.Get*() methods, and save values back to Alfred/info.plist with Config.Set(). Using Config.To() and Config.From(), you can "bind" your own structs to the settings in Alfred: See the documentation for Config.To and Config.From for more information, and _examples/settings for a demo workflow based on the API. The Alfred struct provides methods for the rest of Alfred's AppleScript API. Amongst other things, you can use it to tell Alfred to open, to search for a query, to browse/action files & directories, or to run External Triggers. See documentation of the Alfred struct for more information. AwGo provides a basic, but useful, API for loading and saving data. In addition to reading/writing bytes and marshalling/unmarshalling to/from JSON, the API can auto-refresh expired cache data. See Cache and Session for the API documentation. Workflow has three caches tied to different directories: These all share (almost) the same API. The difference is in when the data go away. Data saved with Session are deleted after the user closes Alfred or starts using a different workflow. The Cache directory is in a system cache directory, so may be deleted by the system or "system maintenance" tools. The Data directory lives with Alfred's application data and would not normally be deleted. Subpackage util provides several functions for running script files and snippets of AppleScript/JavaScript code. See util for documentation and examples. AwGo offers a simple API to start/stop background processes via Workflow's RunInBackground(), IsRunning() and Kill() methods. This is useful for running checks for updates and other jobs that hit the network or take a significant amount of time to complete, allowing you to keep your Script Filters extremely responsive. See _examples/update and _examples/workflows for demonstrations of this API.

Package testerator is TEST execution accelERATOR for GoogleAppEngine/Go starndard environment. When you call the `aetest.NewInstance`, dev_appserver.py will spinup every time. This is very high cost operation. Testerator compress the time of dev_appserver.py operation. following code launch dev server. It's slow (~4s). testerator wrapped devserver spinup. for example. If you want to clean up Datastore or Search API or Memcache, You should import above packages.

Package gohg is a Go client library for using the Mercurial dvcs via it's Command Server. For Mercurial see: http://mercurial.selenic.com. For the Hg Command Server see: http://mercurial.selenic.com/wiki/CommandServer. ▪ Mercurial For Mercurial any version starting from 1.9 should be ok, cause that's the one where the Command Server was introduced. If you send wrong options to it through gohg, or commands or options not yet supported (or obsolete) in your Hg version, you'll simply get back an error from Hg itself, as gohg does not check them. But on the other hand gohg allows issuing new commands, not yet implemented by gohg; see further. ▪ Go Currently gohg is currently developed with Go1.2.1. Though I started with the Go1.0 versions, I can't remember having had to change one or two minor things when moving to Go1.1.1. Updating to Go1.1.2 required no changes at all. I had an issue though with Go1.2, on Windows only, causing some tests using os.exec.Command to fail. I'll have to look into that further, to find out if I should report a bug. ▪ Platform I'm developing and testing both on Windows 7 and Ubuntu 12.04/13.04/13.10. But I suppose it should work on any other platform that supports Hg and Go. Only Go and it's standard library. And Mercurial should be installed of course. At the commandline type: to have gohg available in your GOPATH. Start with importing the gohg package. Examples: All interaction with the Mercurial Command Server (Hg CS from now on) happens through the HgClient type, of which you have to create an instance: Then you can connect the Hg CS as follows: 1. The Hg executable: The first parameter is the Mercurial command to use (which 'hg'). You can leave it blanc to let the gohg tool use the default Mercurial command on the system. Having a parameter for the Hg command allows for using a different Hg version, for testing purposes for instance. 2. The repository path: The second parameter is the path to the repository you want to work on. You can leave it blanc to have gohg use the repository it can find for the current path you are running the program in (searching upward in the folder tree eventually). 3. The config for the session: The third parameter allows to provide extra configuration for the session. Though this is currently not implemented yet. 4. Should gohg create a new repo before connecting? This fourth parameter allows you to indicate that you want gohg to first create a new Mercurial repo if it does not already exist in the path given by the second parameter. See the documentation for more detailed info. 5. The returnvalue: The HgClient.Connect() method eventually returns an error, so you can check if the connection succeeded, and if it is safe to go on. Once the work is done, you can disconnect the Hg CS using a typical Go idiom: The gohg tool sets some environment variables for the Hg CS session, to ensure it's good working: Once we have a connection to a Hg CS we can do some work with the repository. This is done with commands, and gohg offers 3 ways to use them. 1. The command methods of the HgClient type. 2. The HgCmd type. 3. The ExecCmd() method of the HgClient type. Each of which has its own reason of existence. Commands return a byte slice containing the resulting data, and eventually an error. But there are a few exceptions (see api docs). If a command fails, the returned error contains 5 elements: 1) the name of the internal routine where the error was trapped, 2) the name of the HgClient command that was run, 3) the returncode by Mercurial, 4) the full command that was passed to the Hg CS, and 5) the eventual error message returned by Mercurial. So the command could return something like the following in the err variable when it fails: The command aliases (like 'id' for 'identify') are not implemented. But there are examples in identify.go and showconfig.go of how you can easily implement them yourself. This is the easiest way, a kind of convenience. And the most readable too. A con is that as a user you cannot know the exact command that was passed to Hg, without some extra mechanics. Each command has the same name as the corresponding Hg command, except it starts with a capital letter of course. An example (also see examples/example1.go): Note that these methods all use the HgCmd type internally. As such they are convenience wrappers around that type. You could also consider them as a kind of syntactic sugar. If you just want to simply issue a command, nothing more, they are the way to go. The only way to obtain the commandstring sent to Hg when using these command methods, is by calling the HgClient.ShowLastCmd() method afterwards before issuing any other commands: Using the HgCmd type is kind of the standard way. It is a struct that you can instantiate for any command, and for which you can set elements Name, Options and Params (see the api docs for more details). It allows for building the command step by step, and also to query the exact command that will be sent to the Hg CS. A pro of this method is that it allows you to obtain the exact command string that will be passed to Mercurial before it is performed, by calling the CmdLine() method of HgCmd. This could be handy for logging, or for showing feedback to the user in a GUI program. (You could even call CmdLine() several times, and show the building of the command step by step.) An example (also see examples/example2.go): As you can see, this way requires some more coding. The source code will also show you that the HgCmd type is indeed used as the underlying type for the convenience HgClient commands, in all the New<hg-command>Cmd() constructors. The HgClient type has an extra method ExecCmd(), allowing you to pass a fully custom built command to Hg. It accepts a string slice that is supposed to contain all the elements of the complete command, as you would type it at the command line. It could be a convenient way for performing commands that are not yet implemented in gohg, or to make use of extensions to Hg (for which gohg offers no support (yet?)). An example (also see examples/example3.go): Just like on the commandline, options come before parameters. Options to commands use the same name as the long form of the Mercurial option they represent, but start with the necessary capital letter. An options value can be of type bool, int or string. You just pass the value as the parameter to the option (= type conversion of the value to the option type). You can pass any number of options, as the elements of a slice. Options can occur more than once if appropriate (see the ones marked with '[+]' in the Mercurial help). Parameters are used to provide any arguments for a command that are not options. They are passed in as a string or a slice of strings, depending on the command. These parameters typically contain revisions, paths or filenames and so. The gohg tool only checks if the options the caller gives are valid for that command. It does not check if the values are valid for the combination of that command and that option, as that is done by Mercurial. No need to implement that again. If an option is not valid for a command, it is silently ignored, so it is not passed to the Hg CS. A few options are not implemented, as they seemed not relevant for use with this tool (for instance: the global --color option, or the --print0 option for status). The gohg tool only returns errors, with an as clear as possible message, and never uses log.Fatal() nor panics, even if those may seem appropriate. It leaves it up to the caller to do that eventually. It's not up to this library to decide whether to do a retry or to abort the complete application. ▪ The following config settings are fixated in the code (at least for now): ▪ As mentioned earlier, passing config info is not implemented yet. ▪ Currently the only support for extensions to Mercurial is through the ExecCmd method. ▪ If multiple Hg CSs are used against the same repo, it is up to Mercurial to handle this correctly. ▪ Mercurial is always run in english. Internationalization is not necessary here, as the conversation with Hg is internal to the application. Please note that this tool is still in it's very early stages. If you have suggestions or requests, or experience any problems, please use the issue tracker at https://bitbucket.org/gohg/gohg/issues?status=new&status=open. Or you could send a patch or a pull request. Copyright 2012-2014, The gohg Authors. All rights reserved. Use of this source code is governed by a BSD style license that can be found in the LICENSE.md file.