File Selector

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document (the modification functions of jQuery are not included). It depends on Go's experimental html package, which must be installed so that it can be imported as "exp/html". See this tutorial on how to install it accordingly: http://code.google.com/p/go-wiki/wiki/InstallingExp It uses Cascadia as CSS selector (similar to Sizzle for jQuery). This dependency is automatically installed when using "go get ..." to install GoQuery. To provide a chainable interface, error management is strict, and goquery panics if an invalid Cascadia selector is used (this is consistent with the behavior of jQuery/Sizzle/document.querySelectorAll, where an error is thrown). This is necessary since multiple return values cannot be used to allow a chainable interface. It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery The various methods are split into files based on the category of behavior: * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by GoQuery.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document (the modification functions of jQuery are not included). It depends on Go's experimental html package, which must be installed so that it can be imported as "exp/html". See this tutorial on how to install it accordingly: http://code.google.com/p/go-wiki/wiki/InstallingExp It uses Cascadia as CSS selector (similar to Sizzle for jQuery). This dependency is automatically installed when using "go get ..." to install GoQuery. To provide a chainable interface, error management is strict, and goquery panics if an invalid Cascadia selector is used (this is consistent with the behavior of jQuery/Sizzle/document.querySelectorAll, where an error is thrown). This is necessary since multiple return values cannot be used to allow a chainable interface. It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery The various methods are split into files based on the category of behavior: * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by GoQuery.

Godef prints the source location of definitions in Go programs. Usage: File specifies the source file in which to evaluate expr. Expr must be an identifier or a Go expression terminated with a field selector. If expr is not given, then offset specifies a location within file, which should be within, or adjacent to an identifier or field selector. If the -t flag is given, the type of the expression will also be printed. The -a flag causes all the public members (fields and methods) of the expression, and their location, to be printed also; the -A flag prints private members too. If the -i flag is specified, the source is read from standard input, although file must still be specified so that other files in the same source package may be found. Example:

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. GoQuery brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns tokens (nodes), and not a full-featured DOM object, jQuery's manipulation and modification functions have been left off (no point in modifying data in the parsed tree of the HTML, it has no effect). Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. Supported functions are query-oriented features (`hasClass()`, `attr()` and the likes), as well as traversing functions that make sense given what we have to work with. This makes GoQuery a great library for scraping web pages. Syntax-wise, it is as close as possible to jQuery, with the same function names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, I felt that writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior: * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by GoQuery.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document (the modification functions of jQuery are not included). It depends on Go's experimental html package, which must be installed so that it can be imported as "exp/html". See this tutorial on how to install it accordingly: http://code.google.com/p/go-wiki/wiki/InstallingExp It uses Cascadia as CSS selector (similar to Sizzle for jQuery). This dependency is automatically installed when using "go get ..." to install GoQuery. To provide a chainable interface, error management is strict, and goquery panics if an invalid Cascadia selector is used (this is consistent with the behavior of jQuery/Sizzle/document.querySelectorAll, where an error is thrown). This is necessary since multiple return values cannot be used to allow a chainable interface. It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery The various methods are split into files based on the category of behavior: * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by GoQuery.

Godef prints the source location of definitions in Go programs. Usage: File specifies the source file in which to evaluate expr. Expr must be an identifier or a Go expression terminated with a field selector. If expr is not given, then offset specifies a location within file, which should be within, or adjacent to an identifier or field selector. If the -t flag is given, the type of the expression will also be printed. The -a flag causes all the public members (fields and methods) of the expression, and their location, to be printed also; the -A flag prints private members too. If the -i flag is specified, the source is read from standard input, although file must still be specified so that other files in the same source package may be found. If the -acme flag is given, the offset, file name and contents are read from the current acme window. Example:

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document (the modification functions of jQuery are not included). It uses Cascadia as CSS selector (similar to Sizzle for jQuery). To provide a chainable interface, error management is strict, and goquery panics if an invalid Cascadia selector is used (this is consistent with the behavior of jQuery/Sizzle/document.querySelectorAll, where an error is thrown). This is necessary since multiple return values cannot be used to allow a chainable interface. It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery The various methods are split into files based on the category of behavior: * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by GoQuery.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document (the modification functions of jQuery are not included). It uses Cascadia as CSS selector (similar to Sizzle for jQuery). To provide a chainable interface, error management is strict, and goquery panics if an invalid Cascadia selector is used (this is consistent with the behavior of jQuery/Sizzle/document.querySelectorAll, where an error is thrown). This is necessary since multiple return values cannot be used to allow a chainable interface. It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery The various methods are split into files based on the category of behavior: * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by GoQuery.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document (the modification functions of jQuery are not included). It uses Cascadia as CSS selector (similar to Sizzle for jQuery). To provide a chainable interface, error management is strict, and goquery panics if an invalid Cascadia selector is used (this is consistent with the behavior of jQuery/Sizzle/document.querySelectorAll, where an error is thrown). This is necessary since multiple return values cannot be used to allow a chainable interface. It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery The various methods are split into files based on the category of behavior: * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by GoQuery.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Godef prints the source location of definitions in Go programs. Usage: File specifies the source file in which to evaluate expr. Expr must be an identifier or a Go expression terminated with a field selector. If expr is not given, then offset specifies a location within file, which should be within, or adjacent to an identifier or field selector. If the -t flag is given, the type of the expression will also be printed. The -a flag causes all the public members (fields and methods) of the expression, and their location, to be printed also; the -A flag prints private members too. If the -i flag is specified, the source is read from standard input, although file must still be specified so that other files in the same source package may be found. If the -acme flag is given, the offset, file name and contents are read from the current acme window. Example:

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Godef prints the source location of definitions in Go programs. Usage: File specifies the source file in which to evaluate expr. Expr must be an identifier or a Go expression terminated with a field selector. If expr is not given, then offset specifies a location within file, which should be within, or adjacent to an identifier or field selector. If the -t flag is given, the type of the expression will also be printed. The -a flag causes all the public members (fields and methods) of the expression, and their location, to be printed also; the -A flag prints private members too. If the -i flag is specified, the source is read from standard input, although file must still be specified so that other files in the same source package may be found. If the -acme flag is given, the offset, file name and contents are read from the current acme window. Example:

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document (the modification functions of jQuery are not included). It uses Cascadia as CSS selector (similar to Sizzle for jQuery). To provide a chainable interface, error management is strict, and goquery panics if an invalid Cascadia selector is used (this is consistent with the behavior of jQuery/Sizzle/document.querySelectorAll, where an error is thrown). This is necessary since multiple return values cannot be used to allow a chainable interface. It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery The various methods are split into files based on the category of behavior: * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by GoQuery.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document (the modification functions of jQuery are not included). It uses Cascadia as CSS selector (similar to Sizzle for jQuery). To provide a chainable interface, error management is strict, and goquery panics if an invalid Cascadia selector is used (this is consistent with the behavior of jQuery/Sizzle/document.querySelectorAll, where an error is thrown). This is necessary since multiple return values cannot be used to allow a chainable interface. It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery The various methods are split into files based on the category of behavior: * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by GoQuery.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document (the modification functions of jQuery are not included). It uses Cascadia as CSS selector (similar to Sizzle for jQuery). To provide a chainable interface, error management is strict, and goquery panics if an invalid Cascadia selector is used (this is consistent with the behavior of jQuery/Sizzle/document.querySelectorAll, where an error is thrown). This is necessary since multiple return values cannot be used to allow a chainable interface. It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery The various methods are split into files based on the category of behavior: * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by GoQuery.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document (the modification functions of jQuery are not included). It uses Cascadia as CSS selector (similar to Sizzle for jQuery). To provide a chainable interface, error management is strict, and goquery panics if an invalid Cascadia selector is used (this is consistent with the behavior of jQuery/Sizzle/document.querySelectorAll, where an error is thrown). This is necessary since multiple return values cannot be used to allow a chainable interface. It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery The various methods are split into files based on the category of behavior: * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by GoQuery.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document (the modification functions of jQuery are not included). It uses Cascadia as CSS selector (similar to Sizzle for jQuery). To provide a chainable interface, error management is strict, and goquery panics if an invalid Cascadia selector is used (this is consistent with the behavior of jQuery/Sizzle/document.querySelectorAll, where an error is thrown). This is necessary since multiple return values cannot be used to allow a chainable interface. It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery The various methods are split into files based on the category of behavior: * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by GoQuery.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document (the modification functions of jQuery are not included). It uses Cascadia as CSS selector (similar to Sizzle for jQuery). To provide a chainable interface, error management is strict, and goquery panics if an invalid Cascadia selector is used (this is consistent with the behavior of jQuery/Sizzle/document.querySelectorAll, where an error is thrown). This is necessary since multiple return values cannot be used to allow a chainable interface. It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery The various methods are split into files based on the category of behavior: * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by GoQuery.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same function names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document (the modification functions of jQuery are not included). It uses Cascadia as CSS selector (similar to Sizzle for jQuery). To provide a chainable interface, error management is strict, and goquery panics if an invalid Cascadia selector is used (this is consistent with the behavior of jQuery/Sizzle/document.querySelectorAll, where an error is thrown). This is necessary since multiple return values cannot be used to allow a chainable interface. It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery The various methods are split into files based on the category of behavior: * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by GoQuery.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document (the modification functions of jQuery are not included). It uses Cascadia as CSS selector (similar to Sizzle for jQuery). To provide a chainable interface, error management is strict, and goquery panics if an invalid Cascadia selector is used (this is consistent with the behavior of jQuery/Sizzle/document.querySelectorAll, where an error is thrown). This is necessary since multiple return values cannot be used to allow a chainable interface. It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery The various methods are split into files based on the category of behavior: * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by GoQuery.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document (the modification functions of jQuery are not included). It uses Cascadia as CSS selector (similar to Sizzle for jQuery). To provide a chainable interface, error management is strict, and goquery panics if an invalid Cascadia selector is used (this is consistent with the behavior of jQuery/Sizzle/document.querySelectorAll, where an error is thrown). This is necessary since multiple return values cannot be used to allow a chainable interface. It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery The various methods are split into files based on the category of behavior: * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by GoQuery.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document (the modification functions of jQuery are not included). It uses Cascadia as CSS selector (similar to Sizzle for jQuery). To provide a chainable interface, error management is strict, and goquery panics if an invalid Cascadia selector is used (this is consistent with the behavior of jQuery/Sizzle/document.querySelectorAll, where an error is thrown). This is necessary since multiple return values cannot be used to allow a chainable interface. It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery The various methods are split into files based on the category of behavior: * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by GoQuery.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document (the modification functions of jQuery are not included). It uses Cascadia as CSS selector (similar to Sizzle for jQuery). To provide a chainable interface, error management is strict, and goquery panics if an invalid Cascadia selector is used (this is consistent with the behavior of jQuery/Sizzle/document.querySelectorAll, where an error is thrown). This is necessary since multiple return values cannot be used to allow a chainable interface. It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery The various methods are split into files based on the category of behavior: * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by GoQuery.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Godef prints the source location of definitions in Go programs. Usage: File specifies the source file in which to evaluate expr. Expr must be an identifier or a Go expression terminated with a field selector. If expr is not given, then offset specifies a location within file, which should be within, or adjacent to an identifier or field selector. If the -t flag is given, the type of the expression will also be printed. The -a flag causes all the public members (fields and methods) of the expression, and their location, to be printed also; the -A flag prints private members too. If the -i flag is specified, the source is read from standard input, although file must still be specified so that other files in the same source package may be found. If the -acme flag is given, the offset, file name and contents are read from the current acme window. Example:

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document. It brings a syntax and a set of features similar to jQuery to the Go language. It is based on Go's net/html package and the CSS Selector library cascadia. Since the net/html parser returns nodes, and not a full-featured DOM tree, jQuery's stateful manipulation functions (like height(), css(), detach()) have been left off. Also, because the net/html parser requires UTF-8 encoding, so does goquery: it is the caller's responsibility to ensure that the source document provides UTF-8 encoded HTML. See the repository's wiki for various options on how to do this. Syntax-wise, it is as close as possible to jQuery, with the same method names when possible, and that warm and fuzzy chainable interface. jQuery being the ultra-popular library that it is, writing a similar HTML-manipulating library was better to follow its API than to start anew (in the same spirit as Go's fmt package), even though some of its methods are less than intuitive (looking at you, index()...). It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery Please note that because of the net/html dependency, goquery requires Go1.1+. The various methods are split into files based on the category of behavior. The three dots (...) indicate that various "overloads" are available. * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * manipulation.go : methods for modifying the document * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by goquery. * utilities.go : definition of helper functions (and not methods on a *Selection) that are not part of jQuery, but are useful to goquery. This example scrapes the reviews shown on the home page of metalsucks.net.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document (the modification functions of jQuery are not included). It depends on Go's experimental html package, which must be installed so that it can be imported as "exp/html". See this tutorial on how to install it accordingly: http://code.google.com/p/go-wiki/wiki/InstallingExp It uses Cascadia as CSS selector (similar to Sizzle for jQuery). This dependency is automatically installed when using "go get ..." to install GoQuery. To provide a chainable interface, error management is strict, and goquery panics if an invalid Cascadia selector is used (this is consistent with the behavior of jQuery/Sizzle/document.querySelectorAll, where an error is thrown). This is necessary since multiple return values cannot be used to allow a chainable interface. It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery The various methods are split into files based on the category of behavior: * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by GoQuery.

Package goquery implements features similar to jQuery, including the chainable syntax, to manipulate and query an HTML document (the modification functions of jQuery are not included). It uses Cascadia as CSS selector (similar to Sizzle for jQuery). To provide a chainable interface, error management is strict, and goquery panics if an invalid Cascadia selector is used (this is consistent with the behavior of jQuery/Sizzle/document.querySelectorAll, where an error is thrown). This is necessary since multiple return values cannot be used to allow a chainable interface. It is hosted on GitHub, along with additional documentation in the README.md file: https://github.com/puerkitobio/goquery The various methods are split into files based on the category of behavior: * array.go : array-like positional manipulation of the selection. * expand.go : methods that expand or augment the selection's set. * filter.go : filtering methods, that reduce the selection's set. * iteration.go : methods to loop over the selection's nodes. * property.go : methods that inspect and get the node's properties values. * query.go : methods that query, or reflect, a node's identity. * traversal.go : methods to traverse the HTML document tree. * type.go : definition of the types exposed by GoQuery.