Package micro is a pluggable framework for microservices
Package webhook provides a batched HTTP webhook audit.Output implementation with retry, SSRF prevention, and graceful shutdown.
Package jitterbug provides alternative retry strategies for the relay HTTP client.
Package rehttp implements an HTTP transport that handles retries.
Package httpclient provides a configurable HTTP adapter with built-in authentication, TLS, resilience (retry, circuit breaker, rate limiting), and streaming support.
Package callonce provides request-scoped call coalescing and memoization for Go. In fan-out architectures — BFF layers, API gateways, GraphQL servers — a single HTTP request often spawns multiple goroutines that independently fetch the same downstream resource. callonce ensures the function is called exactly once per unique input, with the result shared across all concurrent callers and cached for the lifetime of the request. Unlike golang.org/x/sync/singleflight, which deduplicates only during an in-flight call and then forgets the result, callonce persists successful results for the full request lifetime. Unlike a global cache, it requires no eviction policy — the cache is tied to the context and discarded when the request ends. Concurrent callers for the same key and identifier share a single in-flight call. The first caller executes the function; others block and receive the same result. On success, the result is cached — subsequent calls return it immediately without executing the function again. On failure, the error is returned to all concurrent waiters but is not cached, allowing retries. If the context has no cache attached, Get calls the function directly, providing graceful degradation without panicking or requiring setup. Define typed keys once at package level with NewKey, attach a cache at the top of your handler or middleware with WithCache, then call Get anywhere downstream: No matter how many goroutines call GetUser with the same userID within a single request, fetchUserFromDB is called at most once.
Package rehttp implements an HTTP transport that handles retries.
Package httpcontrol allows a HTTP transport supporting connection pooling, timeouts & retries.
Package gohttpcl provides a robust and configurable HTTP client with support for retries, exponential backoff, jitter, circuit breaker, body buffering, dynamic rate‑limit adjustment, metrics, context‑aware logging with golog, per‑request timeouts, idempotency keys, response validation, and optional JSON response unmarshalling.
Package rehttp implements an HTTP transport that handles retries.
Package retryablehttp provides a familiar HTTP client interface with automatic retries and exponential backoff.
Package nicehttp provides a custom HTTP client with built-in support for rate limiting, automatic retries, and exponential backoff.
Package azcore implements an HTTP request/response middleware pipeline used by Azure SDK clients. The middleware consists of three components. A Policy can be implemented in two ways; as a first-class function for a stateless Policy, or as a method on a type for a stateful Policy. Note that HTTP requests made via the same pipeline share the same Policy instances, so if a Policy mutates its state it MUST be properly synchronized to avoid race conditions. A Policy's Do method is called when an HTTP request wants to be sent over the network. The Do method can perform any operation(s) it desires. For example, it can log the outgoing request, mutate the URL, headers, and/or query parameters, inject a failure, etc. Once the Policy has successfully completed its request work, it must call the Next() method on the *policy.Request instance in order to pass the request to the next Policy in the chain. When an HTTP response comes back, the Policy then gets a chance to process the response/error. The Policy instance can log the response, retry the operation if it failed due to a transient error or timeout, unmarshal the response body, etc. Once the Policy has successfully completed its response work, it must return the *http.Response and error instances to its caller. Template for implementing a stateless Policy: Template for implementing a stateful Policy: The Transporter interface is responsible for sending the HTTP request and returning the corresponding HTTP response or error. The Transporter is invoked by the last Policy in the chain. The default Transporter implementation uses a shared http.Client from the standard library. The same stateful/stateless rules for Policy implementations apply to Transporter implementations. To use the Policy and Transporter instances, an application passes them to the runtime.NewPipeline function. The specified Policy instances form a chain and are invoked in the order provided to NewPipeline followed by the Transporter. Once the Pipeline has been created, create a runtime.Request instance and pass it to Pipeline's Do method. The Pipeline.Do method sends the specified Request through the chain of Policy and Transporter instances. The response/error is then sent through the same chain of Policy instances in reverse order. For example, assuming there are Policy types PolicyA, PolicyB, and PolicyC along with TransportA. The flow of Request and Response looks like the following: The Request instance passed to Pipeline's Do method is a wrapper around an *http.Request. It also contains some internal state and provides various convenience methods. You create a Request instance by calling the runtime.NewRequest function: If the Request should contain a body, call the SetBody method. A seekable stream is required so that upon retry, the retry Policy instance can seek the stream back to the beginning before retrying the network request and re-uploading the body. Operations like JSON-MERGE-PATCH send a JSON null to indicate a value should be deleted. This requirement conflicts with the SDK's default marshalling that specifies "omitempty" as a means to resolve the ambiguity between a field to be excluded and its zero-value. In the above example, Name and Count are defined as pointer-to-type to disambiguate between a missing value (nil) and a zero-value (0) which might have semantic differences. In a PATCH operation, any fields left as nil are to have their values preserved. When updating a Widget's count, one simply specifies the new value for Count, leaving Name nil. To fulfill the requirement for sending a JSON null, the NullValue() function can be used. This sends an explict "null" for Count, indicating that any current value for Count should be deleted. When the HTTP response is received, the *http.Response is returned directly. Each Policy instance can inspect/mutate the *http.Response. To enable logging, set environment variable AZURE_SDK_GO_LOGGING to "all" before executing your program. By default the logger writes to stderr. This can be customized by calling log.SetListener, providing a callback that writes to the desired location. Any custom logging implementation MUST provide its own synchronization to handle concurrent invocations. See the docs for the log package for further details. Pageable operations return potentially large data sets spread over multiple GET requests. The result of each GET is a "page" of data consisting of a slice of items. Pageable operations can be identified by their New*Pager naming convention and return type of *runtime.Pager[T]. The call to WidgetClient.NewListWidgetsPager() returns an instance of *runtime.Pager[T] for fetching pages and determining if there are more pages to fetch. No IO calls are made until the NextPage() method is invoked. Long-running operations (LROs) are operations consisting of an initial request to start the operation followed by polling to determine when the operation has reached a terminal state. An LRO's terminal state is one of the following values. LROs can be identified by their Begin* prefix and their return type of *runtime.Poller[T]. When a call to WidgetClient.BeginCreateOrUpdate() returns a nil error, it means that the LRO has started. It does _not_ mean that the widget has been created or updated (or failed to be created/updated). The *runtime.Poller[T] provides APIs for determining the state of the LRO. To wait for the LRO to complete, call the PollUntilDone() method. The call to PollUntilDone() will block the current goroutine until the LRO has reached a terminal state or the context is canceled/timed out. Note that LROs can take anywhere from several seconds to several minutes. The duration is operation-dependent. Due to this variant behavior, pollers do _not_ have a preconfigured time-out. Use a context with the appropriate cancellation mechanism as required. Pollers provide the ability to serialize their state into a "resume token" which can be used by another process to recreate the poller. This is achieved via the runtime.Poller[T].ResumeToken() method. Note that a token can only be obtained for a poller that's in a non-terminal state. Also note that any subsequent calls to poller.Poll() might change the poller's state. In this case, a new token should be created. After the token has been obtained, it can be used to recreate an instance of the originating poller. When resuming a poller, no IO is performed, and zero-value arguments can be used for everything but the Options.ResumeToken. Resume tokens are unique per service client and operation. Attempting to resume a poller for LRO BeginB() with a token from LRO BeginA() will result in an error. The fake package contains types used for constructing in-memory fake servers used in unit tests. This allows writing tests to cover various success/error conditions without the need for connecting to a live service. Please see https://github.com/Azure/azure-sdk-for-go/tree/main/sdk/samples/fakes for details and examples on how to use fakes.
Package httpretrier provides an HTTP client with automatic retries for transient errors.
`grpc_middleware` is a collection of gRPC middleware packages: interceptors, helpers and tools. gRPC is a fantastic RPC middleware, which sees a lot of adoption in the Golang world. However, the upstream gRPC codebase is relatively bare bones. This package, and most of its child packages provides commonly needed middleware for gRPC: client-side interceptors for retires, server-side interceptors for input validation and auth, functions for chaining said interceptors, metadata convenience methods and more. By default, gRPC doesn't allow one to have more than one interceptor either on the client nor on the server side. `grpc_middleware` provides convenient chaining methods Simple way of turning a multiple interceptors into a single interceptor. Here's an example for server chaining: These interceptors will be executed from left to right: logging, monitoring and auth. Here's an example for client side chaining: These interceptors will be executed from left to right: monitoring and then retry logic. The retry interceptor will call every interceptor that follows it whenever when a retry happens. Implementing your own interceptor is pretty trivial: there are interfaces for that. But the interesting bit exposing common data to handlers (and other middleware), similarly to HTTP Middleware design. For example, you may want to pass the identity of the caller from the auth interceptor all the way to the handling function. For example, a client side interceptor example for auth looks like: Unfortunately, it's not as easy for streaming RPCs. These have the `context.Context` embedded within the `grpc.ServerStream` object. To pass values through context, a wrapper (`WrappedServerStream`) is needed. For example:
Package retry provides retry functionality for http.Client.
Package pester provides additional resiliency over the standard http client methods by allowing you to control concurrency, retries, and a backoff strategy.
Package pester provides additional resiliency over the standard http client methods by allowing you to control concurrency, retries, and a backoff strategy.
Package cloud is the root of the packages used to access Google Cloud Services. See https://godoc.org/cloud.google.com/go for a full list of sub-packages. All clients in sub-packages are configurable via client options. These options are described here: https://godoc.org/google.golang.org/api/option. All the clients in sub-packages support authentication via Google Application Default Credentials (see https://cloud.google.com/docs/authentication/production), or by providing a JSON key file for a Service Account. See the authentication examples in this package for details. By default, all requests in sub-packages will run indefinitely, retrying on transient errors when correctness allows. To set timeouts or arrange for cancellation, use contexts. See the examples for details. Do not attempt to control the initial connection (dialing) of a service by setting a timeout on the context passed to NewClient. Dialing is non-blocking, so timeouts would be ineffective and would only interfere with credential refreshing, which uses the same context. Connection pooling differs in clients based on their transport. Cloud clients either rely on HTTP or gRPC transports to communicate with Google Cloud. Cloud clients that use HTTP (bigquery, compute, storage, and translate) rely on the underlying HTTP transport to cache connections for later re-use. These are cached to the default http.MaxIdleConns and http.MaxIdleConnsPerHost settings in http.DefaultTransport. For gRPC clients (all others in this repo), connection pooling is configurable. Users of cloud client libraries may specify option.WithGRPCConnectionPool(n) as a client option to NewClient calls. This configures the underlying gRPC connections to be pooled and addressed in a round robin fashion. Minimal docker images like Alpine lack CA certificates. This causes RPCs to appear to hang, because gRPC retries indefinitely. See https://github.com/GoogleCloudPlatform/google-cloud-go/issues/928 for more information. To see gRPC logs, set the environment variable GRPC_GO_LOG_SEVERITY_LEVEL. See https://godoc.org/google.golang.org/grpc/grpclog for more information. For HTTP logging, set the GODEBUG environment variable to "http2debug=1" or "http2debug=2". Google Application Default Credentials is the recommended way to authorize and authenticate clients. For information on how to create and obtain Application Default Credentials, see https://developers.google.com/identity/protocols/application-default-credentials. To arrange for an RPC to be canceled, use context.WithCancel. You can use a file with credentials to authenticate and authorize, such as a JSON key file associated with a Google service account. Service Account keys can be created and downloaded from https://console.developers.google.com/permissions/serviceaccounts. This example uses the Datastore client, but the same steps apply to the other client libraries underneath this package. In some cases (for instance, you don't want to store secrets on disk), you can create credentials from in-memory JSON and use the WithCredentials option. The google package in this example is at golang.org/x/oauth2/google. This example uses the PubSub client, but the same steps apply to the other client libraries underneath this package. To set a timeout for an RPC, use context.WithTimeout.
Package yext provides bindings for Yext Location Cloud APIs. For full documentation visit http://developer.yext.com/docs/api-reference/ Create an authenticated client (requires an API key) List all locations Fetch a single location Create a new location (see full documentation for required fields) Edit an existing location The behavior of the API client can be controlled with a Config instance. The Config type exposes chainable utility methods to make construction simpler. By default, clients will retry API requests up to 3 times in the case of non-4xx errors including HTTP transport, 5xx responses, etc. This can be modified via Config: In order to support partial object updates, many of the struct attributes are represented as pointers in order to differentiate between "not-present" and "zero-valued". Helpers are provided to make it easier to work with the pointers: In addition, accessors are provided to make extracting data from the model objects simpler: Errors returned from the API are surfaced as Errors objects. The Errors object is comprised of a list of errors, each with a Message, Code, and Type. A full list of expected errors can be found here: http://developer.yext.com/support/error-messages/ Most functions that interact with the API will return at least two parameters - a yext.Response object and an error. Response contains a Meta substructure that in turn has a UUID and Errors attribute. The UUID can be used to look up individual requests in the developer.yext.com portal, useful for debugging requests. Most of the functionality within the API is exposed via domain-specific services available under the `Client` object. For example, if you are interacting with Locations, use the Client instance's LocationService. If you need to interact with Users, you'd use the UserService. Each service provides a set of common data-access functions that you can use to interact with objects under the service's domain. Where appropriate, services will expose additional, domain-specific functionality.
Package httpx provides a robust HTTP client with retry support and other advanced features within a simple and familiar interface.
Package sdk is the official AWS SDK for the Go programming language. The AWS SDK for Go provides APIs and utilities that developers can use to build Go applications that use AWS services, such as Amazon Elastic Compute Cloud (Amazon EC2) and Amazon Simple Storage Service (Amazon S3). The SDK removes the complexity of coding directly against a web service interface. It hides a lot of the lower-level plumbing, such as authentication, request retries, and error handling. The SDK also includes helpful utilities on top of the AWS APIs that add additional capabilities and functionality. For example, the Amazon S3 Download and Upload Manager will automatically split up large objects into multiple parts and transfer them concurrently. See the s3manager package documentation for more information. https://docs.aws.amazon.com/sdk-for-go/api/service/s3/s3manager/ Checkout the Getting Started Guide and API Reference Docs detailed the SDK's components and details on each AWS client the SDK supports. The Getting Started Guide provides examples and detailed description of how to get setup with the SDK. https://docs.aws.amazon.com/sdk-for-go/v1/developer-guide/welcome.html The API Reference Docs include a detailed breakdown of the SDK's components such as utilities and AWS clients. Use this as a reference of the Go types included with the SDK, such as AWS clients, API operations, and API parameters. https://docs.aws.amazon.com/sdk-for-go/api/ The SDK is composed of two main components, SDK core, and service clients. The SDK core packages are all available under the aws package at the root of the SDK. Each client for a supported AWS service is available within its own package under the service folder at the root of the SDK. aws - SDK core, provides common shared types such as Config, Logger, and utilities to make working with API parameters easier. awserr - Provides the error interface that the SDK will use for all errors that occur in the SDK's processing. This includes service API response errors as well. The Error type is made up of a code and message. Cast the SDK's returned error type to awserr.Error and call the Code method to compare returned error to specific error codes. See the package's documentation for additional values that can be extracted such as RequestId. credentials - Provides the types and built in credentials providers the SDK will use to retrieve AWS credentials to make API requests with. Nested under this folder are also additional credentials providers such as stscreds for assuming IAM roles, and ec2rolecreds for EC2 Instance roles. endpoints - Provides the AWS Regions and Endpoints metadata for the SDK. Use this to lookup AWS service endpoint information such as which services are in a region, and what regions a service is in. Constants are also provided for all region identifiers, e.g UsWest2RegionID for "us-west-2". session - Provides initial default configuration, and load configuration from external sources such as environment and shared credentials file. request - Provides the API request sending, and retry logic for the SDK. This package also includes utilities for defining your own request retryer, and configuring how the SDK processes the request. service - Clients for AWS services. All services supported by the SDK are available under this folder. The SDK includes the Go types and utilities you can use to make requests to AWS service APIs. Within the service folder at the root of the SDK you'll find a package for each AWS service the SDK supports. All service clients follows a common pattern of creation and usage. When creating a client for an AWS service you'll first need to have a Session value constructed. The Session provides shared configuration that can be shared between your service clients. When service clients are created you can pass in additional configuration via the aws.Config type to override configuration provided by in the Session to create service client instances with custom configuration. Once the service's client is created you can use it to make API requests the AWS service. These clients are safe to use concurrently. In the AWS SDK for Go, you can configure settings for service clients, such as the log level and maximum number of retries. Most settings are optional; however, for each service client, you must specify a region and your credentials. The SDK uses these values to send requests to the correct AWS region and sign requests with the correct credentials. You can specify these values as part of a session or as environment variables. See the SDK's configuration guide for more information. https://docs.aws.amazon.com/sdk-for-go/v1/developer-guide/configuring-sdk.html See the session package documentation for more information on how to use Session with the SDK. https://docs.aws.amazon.com/sdk-for-go/api/aws/session/ See the Config type in the aws package for more information on configuration options. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config When using the SDK you'll generally need your AWS credentials to authenticate with AWS services. The SDK supports multiple methods of supporting these credentials. By default the SDK will source credentials automatically from its default credential chain. See the session package for more information on this chain, and how to configure it. The common items in the credential chain are the following: Environment Credentials - Set of environment variables that are useful when sub processes are created for specific roles. Shared Credentials file (~/.aws/credentials) - This file stores your credentials based on a profile name and is useful for local development. EC2 Instance Role Credentials - Use EC2 Instance Role to assign credentials to application running on an EC2 instance. This removes the need to manage credential files in production. Credentials can be configured in code as well by setting the Config's Credentials value to a custom provider or using one of the providers included with the SDK to bypass the default credential chain and use a custom one. This is helpful when you want to instruct the SDK to only use a specific set of credentials or providers. This example creates a credential provider for assuming an IAM role, "myRoleARN" and configures the S3 service client to use that role for API requests. See the credentials package documentation for more information on credential providers included with the SDK, and how to customize the SDK's usage of credentials. https://docs.aws.amazon.com/sdk-for-go/api/aws/credentials The SDK has support for the shared configuration file (~/.aws/config). This support can be enabled by setting the environment variable, "AWS_SDK_LOAD_CONFIG=1", or enabling the feature in code when creating a Session via the Option's SharedConfigState parameter. In addition to the credentials you'll need to specify the region the SDK will use to make AWS API requests to. In the SDK you can specify the region either with an environment variable, or directly in code when a Session or service client is created. The last value specified in code wins if the region is specified multiple ways. To set the region via the environment variable set the "AWS_REGION" to the region you want to the SDK to use. Using this method to set the region will allow you to run your application in multiple regions without needing additional code in the application to select the region. The endpoints package includes constants for all regions the SDK knows. The values are all suffixed with RegionID. These values are helpful, because they reduce the need to type the region string manually. To set the region on a Session use the aws package's Config struct parameter Region to the AWS region you want the service clients created from the session to use. This is helpful when you want to create multiple service clients, and all of the clients make API requests to the same region. See the endpoints package for the AWS Regions and Endpoints metadata. https://docs.aws.amazon.com/sdk-for-go/api/aws/endpoints/ In addition to setting the region when creating a Session you can also set the region on a per service client bases. This overrides the region of a Session. This is helpful when you want to create service clients in specific regions different from the Session's region. See the Config type in the aws package for more information and additional options such as setting the Endpoint, and other service client configuration options. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config Once the client is created you can make an API request to the service. Each API method takes a input parameter, and returns the service response and an error. The SDK provides methods for making the API call in multiple ways. In this list we'll use the S3 ListObjects API as an example for the different ways of making API requests. ListObjects - Base API operation that will make the API request to the service. ListObjectsRequest - API methods suffixed with Request will construct the API request, but not send it. This is also helpful when you want to get a presigned URL for a request, and share the presigned URL instead of your application making the request directly. ListObjectsPages - Same as the base API operation, but uses a callback to automatically handle pagination of the API's response. ListObjectsWithContext - Same as base API operation, but adds support for the Context pattern. This is helpful for controlling the canceling of in flight requests. See the Go standard library context package for more information. This method also takes request package's Option functional options as the variadic argument for modifying how the request will be made, or extracting information from the raw HTTP response. ListObjectsPagesWithContext - same as ListObjectsPages, but adds support for the Context pattern. Similar to ListObjectsWithContext this method also takes the request package's Option function option types as the variadic argument. In addition to the API operations the SDK also includes several higher level methods that abstract checking for and waiting for an AWS resource to be in a desired state. In this list we'll use WaitUntilBucketExists to demonstrate the different forms of waiters. WaitUntilBucketExists. - Method to make API request to query an AWS service for a resource's state. Will return successfully when that state is accomplished. WaitUntilBucketExistsWithContext - Same as WaitUntilBucketExists, but adds support for the Context pattern. In addition these methods take request package's WaiterOptions to configure the waiter, and how underlying request will be made by the SDK. The API method will document which error codes the service might return for the operation. These errors will also be available as const strings prefixed with "ErrCode" in the service client's package. If there are no errors listed in the API's SDK documentation you'll need to consult the AWS service's API documentation for the errors that could be returned. Pagination helper methods are suffixed with "Pages", and provide the functionality needed to round trip API page requests. Pagination methods take a callback function that will be called for each page of the API's response. Waiter helper methods provide the functionality to wait for an AWS resource state. These methods abstract the logic needed to to check the state of an AWS resource, and wait until that resource is in a desired state. The waiter will block until the resource is in the state that is desired, an error occurs, or the waiter times out. If a resource times out the error code returned will be request.WaiterResourceNotReadyErrorCode. This example shows a complete working Go file which will upload a file to S3 and use the Context pattern to implement timeout logic that will cancel the request if it takes too long. This example highlights how to use sessions, create a service client, make a request, handle the error, and process the response.
A plugin for retry HTTP requests.
Package gophercloud provides a multi-vendor interface to OpenStack-compatible clouds. The library has a three-level hierarchy: providers, services, and resources. Provider structs represent the cloud providers that offer and manage a collection of services. You will generally want to create one Provider client per OpenStack cloud. Use your OpenStack credentials to create a Provider client. The IdentityEndpoint is typically refered to as "auth_url" or "OS_AUTH_URL" in information provided by the cloud operator. Additionally, the cloud may refer to TenantID or TenantName as project_id and project_name. Credentials are specified like so: You can authenticate with a token by doing: You may also use the openstack.AuthOptionsFromEnv() helper function. This function reads in standard environment variables frequently found in an OpenStack `openrc` file. Again note that Gophercloud currently uses "tenant" instead of "project". Service structs are specific to a provider and handle all of the logic and operations for a particular OpenStack service. Examples of services include: Compute, Object Storage, Block Storage. In order to define one, you need to pass in the parent provider, like so: Resource structs are the domain models that services make use of in order to work with and represent the state of API resources: Intermediate Result structs are returned for API operations, which allow generic access to the HTTP headers, response body, and any errors associated with the network transaction. To turn a result into a usable resource struct, you must call the Extract method which is chained to the response, or an Extract function from an applicable extension: All requests that enumerate a collection return a Pager struct that is used to iterate through the results one page at a time. Use the EachPage method on that Pager to handle each successive Page in a closure, then use the appropriate extraction method from that request's package to interpret that Page as a slice of results: If you want to obtain the entire collection of pages without doing any intermediary processing on each page, you can use the AllPages method: This top-level package contains utility functions and data types that are used throughout the provider and service packages. Of particular note for end users are the AuthOptions and EndpointOpts structs. An example retry backoff function, which respects the 429 HTTP response code and a "Retry-After" header:
Package sdk is the official AWS SDK for the Go programming language. The AWS SDK for Go provides APIs and utilities that developers can use to build Go applications that use AWS services, such as Amazon Elastic Compute Cloud (Amazon EC2) and Amazon Simple Storage Service (Amazon S3). The SDK removes the complexity of coding directly against a web service interface. It hides a lot of the lower-level plumbing, such as authentication, request retries, and error handling. The SDK also includes helpful utilities on top of the AWS APIs that add additional capabilities and functionality. For example, the Amazon S3 Download and Upload Manager will automatically split up large objects into multiple parts and transfer them concurrently. See the s3manager package documentation for more information. https://docs.aws.amazon.com/sdk-for-go/api/service/s3/s3manager/ Checkout the Getting Started Guide and API Reference Docs detailed the SDK's components and details on each AWS client the SDK supports. The Getting Started Guide provides examples and detailed description of how to get setup with the SDK. https://docs.aws.amazon.com/sdk-for-go/v1/developer-guide/welcome.html The API Reference Docs include a detailed breakdown of the SDK's components such as utilities and AWS clients. Use this as a reference of the Go types included with the SDK, such as AWS clients, API operations, and API parameters. https://docs.aws.amazon.com/sdk-for-go/api/ The SDK is composed of two main components, SDK core, and service clients. The SDK core packages are all available under the aws package at the root of the SDK. Each client for a supported AWS service is available within its own package under the service folder at the root of the SDK. aws - SDK core, provides common shared types such as Config, Logger, and utilities to make working with API parameters easier. awserr - Provides the error interface that the SDK will use for all errors that occur in the SDK's processing. This includes service API response errors as well. The Error type is made up of a code and message. Cast the SDK's returned error type to awserr.Error and call the Code method to compare returned error to specific error codes. See the package's documentation for additional values that can be extracted such as RequestId. credentials - Provides the types and built in credentials providers the SDK will use to retrieve AWS credentials to make API requests with. Nested under this folder are also additional credentials providers such as stscreds for assuming IAM roles, and ec2rolecreds for EC2 Instance roles. endpoints - Provides the AWS Regions and Endpoints metadata for the SDK. Use this to lookup AWS service endpoint information such as which services are in a region, and what regions a service is in. Constants are also provided for all region identifiers, e.g UsWest2RegionID for "us-west-2". session - Provides initial default configuration, and load configuration from external sources such as environment and shared credentials file. request - Provides the API request sending, and retry logic for the SDK. This package also includes utilities for defining your own request retryer, and configuring how the SDK processes the request. service - Clients for AWS services. All services supported by the SDK are available under this folder. The SDK includes the Go types and utilities you can use to make requests to AWS service APIs. Within the service folder at the root of the SDK you'll find a package for each AWS service the SDK supports. All service clients follows a common pattern of creation and usage. When creating a client for an AWS service you'll first need to have a Session value constructed. The Session provides shared configuration that can be shared between your service clients. When service clients are created you can pass in additional configuration via the aws.Config type to override configuration provided by in the Session to create service client instances with custom configuration. Once the service's client is created you can use it to make API requests the AWS service. These clients are safe to use concurrently. In the AWS SDK for Go, you can configure settings for service clients, such as the log level and maximum number of retries. Most settings are optional; however, for each service client, you must specify a region and your credentials. The SDK uses these values to send requests to the correct AWS region and sign requests with the correct credentials. You can specify these values as part of a session or as environment variables. See the SDK's configuration guide for more information. https://docs.aws.amazon.com/sdk-for-go/v1/developer-guide/configuring-sdk.html See the session package documentation for more information on how to use Session with the SDK. https://docs.aws.amazon.com/sdk-for-go/api/aws/session/ See the Config type in the aws package for more information on configuration options. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config When using the SDK you'll generally need your AWS credentials to authenticate with AWS services. The SDK supports multiple methods of supporting these credentials. By default the SDK will source credentials automatically from its default credential chain. See the session package for more information on this chain, and how to configure it. The common items in the credential chain are the following: Environment Credentials - Set of environment variables that are useful when sub processes are created for specific roles. Shared Credentials file (~/.aws/credentials) - This file stores your credentials based on a profile name and is useful for local development. EC2 Instance Role Credentials - Use EC2 Instance Role to assign credentials to application running on an EC2 instance. This removes the need to manage credential files in production. Credentials can be configured in code as well by setting the Config's Credentials value to a custom provider or using one of the providers included with the SDK to bypass the default credential chain and use a custom one. This is helpful when you want to instruct the SDK to only use a specific set of credentials or providers. This example creates a credential provider for assuming an IAM role, "myRoleARN" and configures the S3 service client to use that role for API requests. See the credentials package documentation for more information on credential providers included with the SDK, and how to customize the SDK's usage of credentials. https://docs.aws.amazon.com/sdk-for-go/api/aws/credentials The SDK has support for the shared configuration file (~/.aws/config). This support can be enabled by setting the environment variable, "AWS_SDK_LOAD_CONFIG=1", or enabling the feature in code when creating a Session via the Option's SharedConfigState parameter. In addition to the credentials you'll need to specify the region the SDK will use to make AWS API requests to. In the SDK you can specify the region either with an environment variable, or directly in code when a Session or service client is created. The last value specified in code wins if the region is specified multiple ways. To set the region via the environment variable set the "AWS_REGION" to the region you want to the SDK to use. Using this method to set the region will allow you to run your application in multiple regions without needing additional code in the application to select the region. The endpoints package includes constants for all regions the SDK knows. The values are all suffixed with RegionID. These values are helpful, because they reduce the need to type the region string manually. To set the region on a Session use the aws package's Config struct parameter Region to the AWS region you want the service clients created from the session to use. This is helpful when you want to create multiple service clients, and all of the clients make API requests to the same region. See the endpoints package for the AWS Regions and Endpoints metadata. https://docs.aws.amazon.com/sdk-for-go/api/aws/endpoints/ In addition to setting the region when creating a Session you can also set the region on a per service client bases. This overrides the region of a Session. This is helpful when you want to create service clients in specific regions different from the Session's region. See the Config type in the aws package for more information and additional options such as setting the Endpoint, and other service client configuration options. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config Once the client is created you can make an API request to the service. Each API method takes a input parameter, and returns the service response and an error. The SDK provides methods for making the API call in multiple ways. In this list we'll use the S3 ListObjects API as an example for the different ways of making API requests. ListObjects - Base API operation that will make the API request to the service. ListObjectsRequest - API methods suffixed with Request will construct the API request, but not send it. This is also helpful when you want to get a presigned URL for a request, and share the presigned URL instead of your application making the request directly. ListObjectsPages - Same as the base API operation, but uses a callback to automatically handle pagination of the API's response. ListObjectsWithContext - Same as base API operation, but adds support for the Context pattern. This is helpful for controlling the canceling of in flight requests. See the Go standard library context package for more information. This method also takes request package's Option functional options as the variadic argument for modifying how the request will be made, or extracting information from the raw HTTP response. ListObjectsPagesWithContext - same as ListObjectsPages, but adds support for the Context pattern. Similar to ListObjectsWithContext this method also takes the request package's Option function option types as the variadic argument. In addition to the API operations the SDK also includes several higher level methods that abstract checking for and waiting for an AWS resource to be in a desired state. In this list we'll use WaitUntilBucketExists to demonstrate the different forms of waiters. WaitUntilBucketExists. - Method to make API request to query an AWS service for a resource's state. Will return successfully when that state is accomplished. WaitUntilBucketExistsWithContext - Same as WaitUntilBucketExists, but adds support for the Context pattern. In addition these methods take request package's WaiterOptions to configure the waiter, and how underlying request will be made by the SDK. The API method will document which error codes the service might return for the operation. These errors will also be available as const strings prefixed with "ErrCode" in the service client's package. If there are no errors listed in the API's SDK documentation you'll need to consult the AWS service's API documentation for the errors that could be returned. Pagination helper methods are suffixed with "Pages", and provide the functionality needed to round trip API page requests. Pagination methods take a callback function that will be called for each page of the API's response. Waiter helper methods provide the functionality to wait for an AWS resource state. These methods abstract the logic needed to to check the state of an AWS resource, and wait until that resource is in a desired state. The waiter will block until the resource is in the state that is desired, an error occurs, or the waiter times out. If a resource times out the error code returned will be request.WaiterResourceNotReadyErrorCode. This example shows a complete working Go file which will upload a file to S3 and use the Context pattern to implement timeout logic that will cancel the request if it takes too long. This example highlights how to use sessions, create a service client, make a request, handle the error, and process the response.
Package retrigo provides a familiar HTTP client interface with automatic retries and exponential backoff and multiple target scheduling.
`grpc_middleware` is a collection of gRPC middleware packages: interceptors, helpers and tools. gRPC is a fantastic RPC middleware, which sees a lot of adoption in the Golang world. However, the upstream gRPC codebase is relatively bare bones. This package, and most of its child packages provides commonly needed middleware for gRPC: client-side interceptors for retires, server-side interceptors for input validation and auth, functions for chaining said interceptors, metadata convenience methods and more. By default, gRPC doesn't allow one to have more than one interceptor either on the client nor on the server side. `grpc_middleware` provides convenient chaining methods Simple way of turning a multiple interceptors into a single interceptor. Here's an example for server chaining: These interceptors will be executed from left to right: logging, monitoring and auth. Here's an example for client side chaining: These interceptors will be executed from left to right: monitoring and then retry logic. The retry interceptor will call every interceptor that follows it whenever when a retry happens. Implementing your own interceptor is pretty trivial: there are interfaces for that. But the interesting bit exposing common data to handlers (and other middleware), similarly to HTTP Middleware design. For example, you may want to pass the identity of the caller from the auth interceptor all the way to the handling function. For example, a client side interceptor example for auth looks like: Unfortunately, it's not as easy for streaming RPCs. These have the `context.Context` embedded within the `grpc.ServerStream` object. To pass values through context, a wrapper (`WrappedServerStream`) is needed. For example:
A plugin for retry HTTP requests.
`grpc_middleware` is a collection of gRPC middleware packages: interceptors, helpers and tools. gRPC is a fantastic RPC middleware, which sees a lot of adoption in the Golang world. However, the upstream gRPC codebase is relatively bare bones. This package, and most of its child packages provides commonly needed middleware for gRPC: client-side interceptors for retires, server-side interceptors for input validation and auth, functions for chaining said interceptors, metadata convenience methods and more. By default, gRPC doesn't allow one to have more than one interceptor either on the client nor on the server side. `grpc_middleware` provides convenient chaining methods Simple way of turning a multiple interceptors into a single interceptor. Here's an example for server chaining: These interceptors will be executed from left to right: logging, monitoring and auth. Here's an example for client side chaining: These interceptors will be executed from left to right: monitoring and then retry logic. The retry interceptor will call every interceptor that follows it whenever when a retry happens. Implementing your own interceptor is pretty trivial: there are interfaces for that. But the interesting bit exposing common data to handlers (and other middleware), similarly to HTTP Middleware design. For example, you may want to pass the identity of the caller from the auth interceptor all the way to the handling function. For example, a client side interceptor example for auth looks like: Unfortunately, it's not as easy for streaming RPCs. These have the `context.Context` embedded within the `grpc.ServerStream` object. To pass values through context, a wrapper (`WrappedServerStream`) is needed. For example:
Package sdk is the official AWS SDK for the Go programming language. The AWS SDK for Go provides APIs and utilities that developers can use to build Go applications that use AWS services, such as Amazon Elastic Compute Cloud (Amazon EC2) and Amazon Simple Storage Service (Amazon S3). The SDK removes the complexity of coding directly against a web service interface. It hides a lot of the lower-level plumbing, such as authentication, request retries, and error handling. The SDK also includes helpful utilities on top of the AWS APIs that add additional capabilities and functionality. For example, the Amazon S3 Download and Upload Manager will automatically split up large objects into multiple parts and transfer them concurrently. See the s3manager package documentation for more information. https://docs.aws.amazon.com/sdk-for-go/api/service/s3/s3manager/ Checkout the Getting Started Guide and API Reference Docs detailed the SDK's components and details on each AWS client the SDK supports. The Getting Started Guide provides examples and detailed description of how to get setup with the SDK. https://docs.aws.amazon.com/sdk-for-go/v1/developer-guide/welcome.html The API Reference Docs include a detailed breakdown of the SDK's components such as utilities and AWS clients. Use this as a reference of the Go types included with the SDK, such as AWS clients, API operations, and API parameters. https://docs.aws.amazon.com/sdk-for-go/api/ The SDK is composed of two main components, SDK core, and service clients. The SDK core packages are all available under the aws package at the root of the SDK. Each client for a supported AWS service is available within its own package under the service folder at the root of the SDK. aws - SDK core, provides common shared types such as Config, Logger, and utilities to make working with API parameters easier. awserr - Provides the error interface that the SDK will use for all errors that occur in the SDK's processing. This includes service API response errors as well. The Error type is made up of a code and message. Cast the SDK's returned error type to awserr.Error and call the Code method to compare returned error to specific error codes. See the package's documentation for additional values that can be extracted such as RequestId. credentials - Provides the types and built in credentials providers the SDK will use to retrieve AWS credentials to make API requests with. Nested under this folder are also additional credentials providers such as stscreds for assuming IAM roles, and ec2rolecreds for EC2 Instance roles. endpoints - Provides the AWS Regions and Endpoints metadata for the SDK. Use this to lookup AWS service endpoint information such as which services are in a region, and what regions a service is in. Constants are also provided for all region identifiers, e.g UsWest2RegionID for "us-west-2". session - Provides initial default configuration, and load configuration from external sources such as environment and shared credentials file. request - Provides the API request sending, and retry logic for the SDK. This package also includes utilities for defining your own request retryer, and configuring how the SDK processes the request. service - Clients for AWS services. All services supported by the SDK are available under this folder. The SDK includes the Go types and utilities you can use to make requests to AWS service APIs. Within the service folder at the root of the SDK you'll find a package for each AWS service the SDK supports. All service clients follows a common pattern of creation and usage. When creating a client for an AWS service you'll first need to have a Session value constructed. The Session provides shared configuration that can be shared between your service clients. When service clients are created you can pass in additional configuration via the aws.Config type to override configuration provided by in the Session to create service client instances with custom configuration. Once the service's client is created you can use it to make API requests the AWS service. These clients are safe to use concurrently. In the AWS SDK for Go, you can configure settings for service clients, such as the log level and maximum number of retries. Most settings are optional; however, for each service client, you must specify a region and your credentials. The SDK uses these values to send requests to the correct AWS region and sign requests with the correct credentials. You can specify these values as part of a session or as environment variables. See the SDK's configuration guide for more information. https://docs.aws.amazon.com/sdk-for-go/v1/developer-guide/configuring-sdk.html See the session package documentation for more information on how to use Session with the SDK. https://docs.aws.amazon.com/sdk-for-go/api/aws/session/ See the Config type in the aws package for more information on configuration options. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config When using the SDK you'll generally need your AWS credentials to authenticate with AWS services. The SDK supports multiple methods of supporting these credentials. By default the SDK will source credentials automatically from its default credential chain. See the session package for more information on this chain, and how to configure it. The common items in the credential chain are the following: Environment Credentials - Set of environment variables that are useful when sub processes are created for specific roles. Shared Credentials file (~/.aws/credentials) - This file stores your credentials based on a profile name and is useful for local development. EC2 Instance Role Credentials - Use EC2 Instance Role to assign credentials to application running on an EC2 instance. This removes the need to manage credential files in production. Credentials can be configured in code as well by setting the Config's Credentials value to a custom provider or using one of the providers included with the SDK to bypass the default credential chain and use a custom one. This is helpful when you want to instruct the SDK to only use a specific set of credentials or providers. This example creates a credential provider for assuming an IAM role, "myRoleARN" and configures the S3 service client to use that role for API requests. See the credentials package documentation for more information on credential providers included with the SDK, and how to customize the SDK's usage of credentials. https://docs.aws.amazon.com/sdk-for-go/api/aws/credentials The SDK has support for the shared configuration file (~/.aws/config). This support can be enabled by setting the environment variable, "AWS_SDK_LOAD_CONFIG=1", or enabling the feature in code when creating a Session via the Option's SharedConfigState parameter. In addition to the credentials you'll need to specify the region the SDK will use to make AWS API requests to. In the SDK you can specify the region either with an environment variable, or directly in code when a Session or service client is created. The last value specified in code wins if the region is specified multiple ways. To set the region via the environment variable set the "AWS_REGION" to the region you want to the SDK to use. Using this method to set the region will allow you to run your application in multiple regions without needing additional code in the application to select the region. The endpoints package includes constants for all regions the SDK knows. The values are all suffixed with RegionID. These values are helpful, because they reduce the need to type the region string manually. To set the region on a Session use the aws package's Config struct parameter Region to the AWS region you want the service clients created from the session to use. This is helpful when you want to create multiple service clients, and all of the clients make API requests to the same region. See the endpoints package for the AWS Regions and Endpoints metadata. https://docs.aws.amazon.com/sdk-for-go/api/aws/endpoints/ In addition to setting the region when creating a Session you can also set the region on a per service client bases. This overrides the region of a Session. This is helpful when you want to create service clients in specific regions different from the Session's region. See the Config type in the aws package for more information and additional options such as setting the Endpoint, and other service client configuration options. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config Once the client is created you can make an API request to the service. Each API method takes a input parameter, and returns the service response and an error. The SDK provides methods for making the API call in multiple ways. In this list we'll use the S3 ListObjects API as an example for the different ways of making API requests. ListObjects - Base API operation that will make the API request to the service. ListObjectsRequest - API methods suffixed with Request will construct the API request, but not send it. This is also helpful when you want to get a presigned URL for a request, and share the presigned URL instead of your application making the request directly. ListObjectsPages - Same as the base API operation, but uses a callback to automatically handle pagination of the API's response. ListObjectsWithContext - Same as base API operation, but adds support for the Context pattern. This is helpful for controlling the canceling of in flight requests. See the Go standard library context package for more information. This method also takes request package's Option functional options as the variadic argument for modifying how the request will be made, or extracting information from the raw HTTP response. ListObjectsPagesWithContext - same as ListObjectsPages, but adds support for the Context pattern. Similar to ListObjectsWithContext this method also takes the request package's Option function option types as the variadic argument. In addition to the API operations the SDK also includes several higher level methods that abstract checking for and waiting for an AWS resource to be in a desired state. In this list we'll use WaitUntilBucketExists to demonstrate the different forms of waiters. WaitUntilBucketExists. - Method to make API request to query an AWS service for a resource's state. Will return successfully when that state is accomplished. WaitUntilBucketExistsWithContext - Same as WaitUntilBucketExists, but adds support for the Context pattern. In addition these methods take request package's WaiterOptions to configure the waiter, and how underlying request will be made by the SDK. The API method will document which error codes the service might return for the operation. These errors will also be available as const strings prefixed with "ErrCode" in the service client's package. If there are no errors listed in the API's SDK documentation you'll need to consult the AWS service's API documentation for the errors that could be returned. Pagination helper methods are suffixed with "Pages", and provide the functionality needed to round trip API page requests. Pagination methods take a callback function that will be called for each page of the API's response. Waiter helper methods provide the functionality to wait for an AWS resource state. These methods abstract the logic needed to to check the state of an AWS resource, and wait until that resource is in a desired state. The waiter will block until the resource is in the state that is desired, an error occurs, or the waiter times out. If a resource times out the error code returned will be request.WaiterResourceNotReadyErrorCode. This example shows a complete working Go file which will upload a file to S3 and use the Context pattern to implement timeout logic that will cancel the request if it takes too long. This example highlights how to use sessions, create a service client, make a request, handle the error, and process the response.
Package sdk is the official AWS SDK for the Go programming language. The AWS SDK for Go provides APIs and utilities that developers can use to build Go applications that use AWS services, such as Amazon Elastic Compute Cloud (Amazon EC2) and Amazon Simple Storage Service (Amazon S3). The SDK removes the complexity of coding directly against a web service interface. It hides a lot of the lower-level plumbing, such as authentication, request retries, and error handling. The SDK also includes helpful utilities on top of the AWS APIs that add additional capabilities and functionality. For example, the Amazon S3 Download and Upload Manager will automatically split up large objects into multiple parts and transfer them concurrently. See the s3manager package documentation for more information. https://docs.aws.amazon.com/sdk-for-go/api/service/s3/s3manager/ Checkout the Getting Started Guide and API Reference Docs detailed the SDK's components and details on each AWS client the SDK supports. The Getting Started Guide provides examples and detailed description of how to get setup with the SDK. https://docs.aws.amazon.com/sdk-for-go/v1/developer-guide/welcome.html The API Reference Docs include a detailed breakdown of the SDK's components such as utilities and AWS clients. Use this as a reference of the Go types included with the SDK, such as AWS clients, API operations, and API parameters. https://docs.aws.amazon.com/sdk-for-go/api/ The SDK is composed of two main components, SDK core, and service clients. The SDK core packages are all available under the aws package at the root of the SDK. Each client for a supported AWS service is available within its own package under the service folder at the root of the SDK. aws - SDK core, provides common shared types such as Config, Logger, and utilities to make working with API parameters easier. awserr - Provides the error interface that the SDK will use for all errors that occur in the SDK's processing. This includes service API response errors as well. The Error type is made up of a code and message. Cast the SDK's returned error type to awserr.Error and call the Code method to compare returned error to specific error codes. See the package's documentation for additional values that can be extracted such as RequestId. credentials - Provides the types and built in credentials providers the SDK will use to retrieve AWS credentials to make API requests with. Nested under this folder are also additional credentials providers such as stscreds for assuming IAM roles, and ec2rolecreds for EC2 Instance roles. endpoints - Provides the AWS Regions and Endpoints metadata for the SDK. Use this to lookup AWS service endpoint information such as which services are in a region, and what regions a service is in. Constants are also provided for all region identifiers, e.g UsWest2RegionID for "us-west-2". session - Provides initial default configuration, and load configuration from external sources such as environment and shared credentials file. request - Provides the API request sending, and retry logic for the SDK. This package also includes utilities for defining your own request retryer, and configuring how the SDK processes the request. service - Clients for AWS services. All services supported by the SDK are available under this folder. The SDK includes the Go types and utilities you can use to make requests to AWS service APIs. Within the service folder at the root of the SDK you'll find a package for each AWS service the SDK supports. All service clients follows a common pattern of creation and usage. When creating a client for an AWS service you'll first need to have a Session value constructed. The Session provides shared configuration that can be shared between your service clients. When service clients are created you can pass in additional configuration via the aws.Config type to override configuration provided by in the Session to create service client instances with custom configuration. Once the service's client is created you can use it to make API requests the AWS service. These clients are safe to use concurrently. In the AWS SDK for Go, you can configure settings for service clients, such as the log level and maximum number of retries. Most settings are optional; however, for each service client, you must specify a region and your credentials. The SDK uses these values to send requests to the correct AWS region and sign requests with the correct credentials. You can specify these values as part of a session or as environment variables. See the SDK's configuration guide for more information. https://docs.aws.amazon.com/sdk-for-go/v1/developer-guide/configuring-sdk.html See the session package documentation for more information on how to use Session with the SDK. https://docs.aws.amazon.com/sdk-for-go/api/aws/session/ See the Config type in the aws package for more information on configuration options. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config When using the SDK you'll generally need your AWS credentials to authenticate with AWS services. The SDK supports multiple methods of supporting these credentials. By default the SDK will source credentials automatically from its default credential chain. See the session package for more information on this chain, and how to configure it. The common items in the credential chain are the following: Environment Credentials - Set of environment variables that are useful when sub processes are created for specific roles. Shared Credentials file (~/.aws/credentials) - This file stores your credentials based on a profile name and is useful for local development. EC2 Instance Role Credentials - Use EC2 Instance Role to assign credentials to application running on an EC2 instance. This removes the need to manage credential files in production. Credentials can be configured in code as well by setting the Config's Credentials value to a custom provider or using one of the providers included with the SDK to bypass the default credential chain and use a custom one. This is helpful when you want to instruct the SDK to only use a specific set of credentials or providers. This example creates a credential provider for assuming an IAM role, "myRoleARN" and configures the S3 service client to use that role for API requests. See the credentials package documentation for more information on credential providers included with the SDK, and how to customize the SDK's usage of credentials. https://docs.aws.amazon.com/sdk-for-go/api/aws/credentials The SDK has support for the shared configuration file (~/.aws/config). This support can be enabled by setting the environment variable, "AWS_SDK_LOAD_CONFIG=1", or enabling the feature in code when creating a Session via the Option's SharedConfigState parameter. In addition to the credentials you'll need to specify the region the SDK will use to make AWS API requests to. In the SDK you can specify the region either with an environment variable, or directly in code when a Session or service client is created. The last value specified in code wins if the region is specified multiple ways. To set the region via the environment variable set the "AWS_REGION" to the region you want to the SDK to use. Using this method to set the region will allow you to run your application in multiple regions without needing additional code in the application to select the region. The endpoints package includes constants for all regions the SDK knows. The values are all suffixed with RegionID. These values are helpful, because they reduce the need to type the region string manually. To set the region on a Session use the aws package's Config struct parameter Region to the AWS region you want the service clients created from the session to use. This is helpful when you want to create multiple service clients, and all of the clients make API requests to the same region. See the endpoints package for the AWS Regions and Endpoints metadata. https://docs.aws.amazon.com/sdk-for-go/api/aws/endpoints/ In addition to setting the region when creating a Session you can also set the region on a per service client bases. This overrides the region of a Session. This is helpful when you want to create service clients in specific regions different from the Session's region. See the Config type in the aws package for more information and additional options such as setting the Endpoint, and other service client configuration options. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config Once the client is created you can make an API request to the service. Each API method takes a input parameter, and returns the service response and an error. The SDK provides methods for making the API call in multiple ways. In this list we'll use the S3 ListObjects API as an example for the different ways of making API requests. ListObjects - Base API operation that will make the API request to the service. ListObjectsRequest - API methods suffixed with Request will construct the API request, but not send it. This is also helpful when you want to get a presigned URL for a request, and share the presigned URL instead of your application making the request directly. ListObjectsPages - Same as the base API operation, but uses a callback to automatically handle pagination of the API's response. ListObjectsWithContext - Same as base API operation, but adds support for the Context pattern. This is helpful for controlling the canceling of in flight requests. See the Go standard library context package for more information. This method also takes request package's Option functional options as the variadic argument for modifying how the request will be made, or extracting information from the raw HTTP response. ListObjectsPagesWithContext - same as ListObjectsPages, but adds support for the Context pattern. Similar to ListObjectsWithContext this method also takes the request package's Option function option types as the variadic argument. In addition to the API operations the SDK also includes several higher level methods that abstract checking for and waiting for an AWS resource to be in a desired state. In this list we'll use WaitUntilBucketExists to demonstrate the different forms of waiters. WaitUntilBucketExists. - Method to make API request to query an AWS service for a resource's state. Will return successfully when that state is accomplished. WaitUntilBucketExistsWithContext - Same as WaitUntilBucketExists, but adds support for the Context pattern. In addition these methods take request package's WaiterOptions to configure the waiter, and how underlying request will be made by the SDK. The API method will document which error codes the service might return for the operation. These errors will also be available as const strings prefixed with "ErrCode" in the service client's package. If there are no errors listed in the API's SDK documentation you'll need to consult the AWS service's API documentation for the errors that could be returned. Pagination helper methods are suffixed with "Pages", and provide the functionality needed to round trip API page requests. Pagination methods take a callback function that will be called for each page of the API's response. Waiter helper methods provide the functionality to wait for an AWS resource state. These methods abstract the logic needed to to check the state of an AWS resource, and wait until that resource is in a desired state. The waiter will block until the resource is in the state that is desired, an error occurs, or the waiter times out. If a resource times out the error code returned will be request.WaiterResourceNotReadyErrorCode. This example shows a complete working Go file which will upload a file to S3 and use the Context pattern to implement timeout logic that will cancel the request if it takes too long. This example highlights how to use sessions, create a service client, make a request, handle the error, and process the response.
Code generated by go run bytesconv_table_gen.go; DO NOT EDIT. See bytesconv_table_gen.go for more information about these tables. Package fasthttp provides fast HTTP server and client API. Fasthttp provides the following features: Optimized for speed. Easily handles more than 100K qps and more than 1M concurrent keep-alive connections on modern hardware. Optimized for low memory usage. Easy 'Connection: Upgrade' support via RequestCtx.Hijack. Server provides the following anti-DoS limits: The number of concurrent connections. The number of concurrent connections per client IP. The number of requests per connection. Request read timeout. Response write timeout. Maximum request header size. Maximum request body size. Maximum request execution time. Maximum keep-alive connection lifetime. Early filtering out non-GET requests. A lot of additional useful info is exposed to request handler: Server and client address. Per-request logger. Unique request id. Request start time. Connection start time. Request sequence number for the current connection. Client supports automatic retry on idempotent requests' failure. Fasthttp API is designed with the ability to extend existing client and server implementations or to write custom client and server implementations from scratch.
The retryablehttp package provides a familiar HTTP client interface with automatic retries and exponential backoff.
Package gophercloud provides a multi-vendor interface to OpenStack-compatible clouds. The library has a three-level hierarchy: providers, services, and resources. Provider structs represent the cloud providers that offer and manage a collection of services. You will generally want to create one Provider client per OpenStack cloud. Use your OpenStack credentials to create a Provider client. The IdentityEndpoint is typically refered to as "auth_url" or "OS_AUTH_URL" in information provided by the cloud operator. Additionally, the cloud may refer to TenantID or TenantName as project_id and project_name. Credentials are specified like so: You can authenticate with a token by doing: You may also use the openstack.AuthOptionsFromEnv() helper function. This function reads in standard environment variables frequently found in an OpenStack `openrc` file. Again note that Gophercloud currently uses "tenant" instead of "project". Service structs are specific to a provider and handle all of the logic and operations for a particular OpenStack service. Examples of services include: Compute, Object Storage, Block Storage. In order to define one, you need to pass in the parent provider, like so: Resource structs are the domain models that services make use of in order to work with and represent the state of API resources: Intermediate Result structs are returned for API operations, which allow generic access to the HTTP headers, response body, and any errors associated with the network transaction. To turn a result into a usable resource struct, you must call the Extract method which is chained to the response, or an Extract function from an applicable extension: All requests that enumerate a collection return a Pager struct that is used to iterate through the results one page at a time. Use the EachPage method on that Pager to handle each successive Page in a closure, then use the appropriate extraction method from that request's package to interpret that Page as a slice of results: If you want to obtain the entire collection of pages without doing any intermediary processing on each page, you can use the AllPages method: This top-level package contains utility functions and data types that are used throughout the provider and service packages. Of particular note for end users are the AuthOptions and EndpointOpts structs. An example retry backoff function, which respects the 429 HTTP response code and a "Retry-After" header:
Package pester provides additional resiliency over the standard http client methods by allowing you to control concurrency, retries, and a backoff strategy.
Package sdk is the official AWS SDK for the Go programming language. The AWS SDK for Go provides APIs and utilities that developers can use to build Go applications that use AWS services, such as Amazon Elastic Compute Cloud (Amazon EC2) and Amazon Simple Storage Service (Amazon S3). The SDK removes the complexity of coding directly against a web service interface. It hides a lot of the lower-level plumbing, such as authentication, request retries, and error handling. The SDK also includes helpful utilities on top of the AWS APIs that add additional capabilities and functionality. For example, the Amazon S3 Download and Upload Manager will automatically split up large objects into multiple parts and transfer them concurrently. See the s3manager package documentation for more information. https://docs.aws.amazon.com/sdk-for-go/api/service/s3/s3manager/ Checkout the Getting Started Guide and API Reference Docs detailed the SDK's components and details on each AWS client the SDK supports. The Getting Started Guide provides examples and detailed description of how to get setup with the SDK. https://docs.aws.amazon.com/sdk-for-go/v1/developer-guide/welcome.html The API Reference Docs include a detailed breakdown of the SDK's components such as utilities and AWS clients. Use this as a reference of the Go types included with the SDK, such as AWS clients, API operations, and API parameters. https://docs.aws.amazon.com/sdk-for-go/api/ The SDK is composed of two main components, SDK core, and service clients. The SDK core packages are all available under the aws package at the root of the SDK. Each client for a supported AWS service is available within its own package under the service folder at the root of the SDK. aws - SDK core, provides common shared types such as Config, Logger, and utilities to make working with API parameters easier. awserr - Provides the error interface that the SDK will use for all errors that occur in the SDK's processing. This includes service API response errors as well. The Error type is made up of a code and message. Cast the SDK's returned error type to awserr.Error and call the Code method to compare returned error to specific error codes. See the package's documentation for additional values that can be extracted such as RequestId. credentials - Provides the types and built in credentials providers the SDK will use to retrieve AWS credentials to make API requests with. Nested under this folder are also additional credentials providers such as stscreds for assuming IAM roles, and ec2rolecreds for EC2 Instance roles. endpoints - Provides the AWS Regions and Endpoints metadata for the SDK. Use this to lookup AWS service endpoint information such as which services are in a region, and what regions a service is in. Constants are also provided for all region identifiers, e.g UsWest2RegionID for "us-west-2". session - Provides initial default configuration, and load configuration from external sources such as environment and shared credentials file. request - Provides the API request sending, and retry logic for the SDK. This package also includes utilities for defining your own request retryer, and configuring how the SDK processes the request. service - Clients for AWS services. All services supported by the SDK are available under this folder. The SDK includes the Go types and utilities you can use to make requests to AWS service APIs. Within the service folder at the root of the SDK you'll find a package for each AWS service the SDK supports. All service clients follows a common pattern of creation and usage. When creating a client for an AWS service you'll first need to have a Session value constructed. The Session provides shared configuration that can be shared between your service clients. When service clients are created you can pass in additional configuration via the aws.Config type to override configuration provided by in the Session to create service client instances with custom configuration. Once the service's client is created you can use it to make API requests the AWS service. These clients are safe to use concurrently. In the AWS SDK for Go, you can configure settings for service clients, such as the log level and maximum number of retries. Most settings are optional; however, for each service client, you must specify a region and your credentials. The SDK uses these values to send requests to the correct AWS region and sign requests with the correct credentials. You can specify these values as part of a session or as environment variables. See the SDK's configuration guide for more information. https://docs.aws.amazon.com/sdk-for-go/v1/developer-guide/configuring-sdk.html See the session package documentation for more information on how to use Session with the SDK. https://docs.aws.amazon.com/sdk-for-go/api/aws/session/ See the Config type in the aws package for more information on configuration options. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config When using the SDK you'll generally need your AWS credentials to authenticate with AWS services. The SDK supports multiple methods of supporting these credentials. By default the SDK will source credentials automatically from its default credential chain. See the session package for more information on this chain, and how to configure it. The common items in the credential chain are the following: Environment Credentials - Set of environment variables that are useful when sub processes are created for specific roles. Shared Credentials file (~/.aws/credentials) - This file stores your credentials based on a profile name and is useful for local development. EC2 Instance Role Credentials - Use EC2 Instance Role to assign credentials to application running on an EC2 instance. This removes the need to manage credential files in production. Credentials can be configured in code as well by setting the Config's Credentials value to a custom provider or using one of the providers included with the SDK to bypass the default credential chain and use a custom one. This is helpful when you want to instruct the SDK to only use a specific set of credentials or providers. This example creates a credential provider for assuming an IAM role, "myRoleARN" and configures the S3 service client to use that role for API requests. See the credentials package documentation for more information on credential providers included with the SDK, and how to customize the SDK's usage of credentials. https://docs.aws.amazon.com/sdk-for-go/api/aws/credentials The SDK has support for the shared configuration file (~/.aws/config). This support can be enabled by setting the environment variable, "AWS_SDK_LOAD_CONFIG=1", or enabling the feature in code when creating a Session via the Option's SharedConfigState parameter. In addition to the credentials you'll need to specify the region the SDK will use to make AWS API requests to. In the SDK you can specify the region either with an environment variable, or directly in code when a Session or service client is created. The last value specified in code wins if the region is specified multiple ways. To set the region via the environment variable set the "AWS_REGION" to the region you want to the SDK to use. Using this method to set the region will allow you to run your application in multiple regions without needing additional code in the application to select the region. The endpoints package includes constants for all regions the SDK knows. The values are all suffixed with RegionID. These values are helpful, because they reduce the need to type the region string manually. To set the region on a Session use the aws package's Config struct parameter Region to the AWS region you want the service clients created from the session to use. This is helpful when you want to create multiple service clients, and all of the clients make API requests to the same region. See the endpoints package for the AWS Regions and Endpoints metadata. https://docs.aws.amazon.com/sdk-for-go/api/aws/endpoints/ In addition to setting the region when creating a Session you can also set the region on a per service client bases. This overrides the region of a Session. This is helpful when you want to create service clients in specific regions different from the Session's region. See the Config type in the aws package for more information and additional options such as setting the Endpoint, and other service client configuration options. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config Once the client is created you can make an API request to the service. Each API method takes a input parameter, and returns the service response and an error. The SDK provides methods for making the API call in multiple ways. In this list we'll use the S3 ListObjects API as an example for the different ways of making API requests. ListObjects - Base API operation that will make the API request to the service. ListObjectsRequest - API methods suffixed with Request will construct the API request, but not send it. This is also helpful when you want to get a presigned URL for a request, and share the presigned URL instead of your application making the request directly. ListObjectsPages - Same as the base API operation, but uses a callback to automatically handle pagination of the API's response. ListObjectsWithContext - Same as base API operation, but adds support for the Context pattern. This is helpful for controlling the canceling of in flight requests. See the Go standard library context package for more information. This method also takes request package's Option functional options as the variadic argument for modifying how the request will be made, or extracting information from the raw HTTP response. ListObjectsPagesWithContext - same as ListObjectsPages, but adds support for the Context pattern. Similar to ListObjectsWithContext this method also takes the request package's Option function option types as the variadic argument. In addition to the API operations the SDK also includes several higher level methods that abstract checking for and waiting for an AWS resource to be in a desired state. In this list we'll use WaitUntilBucketExists to demonstrate the different forms of waiters. WaitUntilBucketExists. - Method to make API request to query an AWS service for a resource's state. Will return successfully when that state is accomplished. WaitUntilBucketExistsWithContext - Same as WaitUntilBucketExists, but adds support for the Context pattern. In addition these methods take request package's WaiterOptions to configure the waiter, and how underlying request will be made by the SDK. The API method will document which error codes the service might return for the operation. These errors will also be available as const strings prefixed with "ErrCode" in the service client's package. If there are no errors listed in the API's SDK documentation you'll need to consult the AWS service's API documentation for the errors that could be returned. Pagination helper methods are suffixed with "Pages", and provide the functionality needed to round trip API page requests. Pagination methods take a callback function that will be called for each page of the API's response. Waiter helper methods provide the functionality to wait for an AWS resource state. These methods abstract the logic needed to to check the state of an AWS resource, and wait until that resource is in a desired state. The waiter will block until the resource is in the state that is desired, an error occurs, or the waiter times out. If a resource times out the error code returned will be request.WaiterResourceNotReadyErrorCode. This example shows a complete working Go file which will upload a file to S3 and use the Context pattern to implement timeout logic that will cancel the request if it takes too long. This example highlights how to use sessions, create a service client, make a request, handle the error, and process the response.
Package azcore implements an HTTP request/response middleware pipeline used by Azure SDK clients. The middleware consists of three components. A Policy can be implemented in two ways; as a first-class function for a stateless Policy, or as a method on a type for a stateful Policy. Note that HTTP requests made via the same pipeline share the same Policy instances, so if a Policy mutates its state it MUST be properly synchronized to avoid race conditions. A Policy's Do method is called when an HTTP request wants to be sent over the network. The Do method can perform any operation(s) it desires. For example, it can log the outgoing request, mutate the URL, headers, and/or query parameters, inject a failure, etc. Once the Policy has successfully completed its request work, it must call the Next() method on the *policy.Request instance in order to pass the request to the next Policy in the chain. When an HTTP response comes back, the Policy then gets a chance to process the response/error. The Policy instance can log the response, retry the operation if it failed due to a transient error or timeout, unmarshal the response body, etc. Once the Policy has successfully completed its response work, it must return the *http.Response and error instances to its caller. Template for implementing a stateless Policy: Template for implementing a stateful Policy: The Transporter interface is responsible for sending the HTTP request and returning the corresponding HTTP response or error. The Transporter is invoked by the last Policy in the chain. The default Transporter implementation uses a shared http.Client from the standard library. The same stateful/stateless rules for Policy implementations apply to Transporter implementations. To use the Policy and Transporter instances, an application passes them to the runtime.NewPipeline function. The specified Policy instances form a chain and are invoked in the order provided to NewPipeline followed by the Transporter. Once the Pipeline has been created, create a runtime.Request instance and pass it to Pipeline's Do method. The Pipeline.Do method sends the specified Request through the chain of Policy and Transporter instances. The response/error is then sent through the same chain of Policy instances in reverse order. For example, assuming there are Policy types PolicyA, PolicyB, and PolicyC along with TransportA. The flow of Request and Response looks like the following: The Request instance passed to Pipeline's Do method is a wrapper around an *http.Request. It also contains some internal state and provides various convenience methods. You create a Request instance by calling the runtime.NewRequest function: If the Request should contain a body, call the SetBody method. A seekable stream is required so that upon retry, the retry Policy instance can seek the stream back to the beginning before retrying the network request and re-uploading the body. Operations like JSON-MERGE-PATCH send a JSON null to indicate a value should be deleted. This requirement conflicts with the SDK's default marshalling that specifies "omitempty" as a means to resolve the ambiguity between a field to be excluded and its zero-value. In the above example, Name and Count are defined as pointer-to-type to disambiguate between a missing value (nil) and a zero-value (0) which might have semantic differences. In a PATCH operation, any fields left as nil are to have their values preserved. When updating a Widget's count, one simply specifies the new value for Count, leaving Name nil. To fulfill the requirement for sending a JSON null, the NullValue() function can be used. This sends an explict "null" for Count, indicating that any current value for Count should be deleted. When the HTTP response is received, the *http.Response is returned directly. Each Policy instance can inspect/mutate the *http.Response. To enable logging, set environment variable AZURE_SDK_GO_LOGGING to "all" before executing your program. By default the logger writes to stderr. This can be customized by calling log.SetListener, providing a callback that writes to the desired location. Any custom logging implementation MUST provide its own synchronization to handle concurrent invocations. See the docs for the log package for further details. Pageable operations return potentially large data sets spread over multiple GET requests. The result of each GET is a "page" of data consisting of a slice of items. Pageable operations can be identified by their New*Pager naming convention and return type of *runtime.Pager[T]. The call to WidgetClient.NewListWidgetsPager() returns an instance of *runtime.Pager[T] for fetching pages and determining if there are more pages to fetch. No IO calls are made until the NextPage() method is invoked. Long-running operations (LROs) are operations consisting of an initial request to start the operation followed by polling to determine when the operation has reached a terminal state. An LRO's terminal state is one of the following values. LROs can be identified by their Begin* prefix and their return type of *runtime.Poller[T]. When a call to WidgetClient.BeginCreateOrUpdate() returns a nil error, it means that the LRO has started. It does _not_ mean that the widget has been created or updated (or failed to be created/updated). The *runtime.Poller[T] provides APIs for determining the state of the LRO. To wait for the LRO to complete, call the PollUntilDone() method. The call to PollUntilDone() will block the current goroutine until the LRO has reached a terminal state or the context is canceled/timed out. Note that LROs can take anywhere from several seconds to several minutes. The duration is operation-dependent. Due to this variant behavior, pollers do _not_ have a preconfigured time-out. Use a context with the appropriate cancellation mechanism as required. Pollers provide the ability to serialize their state into a "resume token" which can be used by another process to recreate the poller. This is achieved via the runtime.Poller[T].ResumeToken() method. Note that a token can only be obtained for a poller that's in a non-terminal state. Also note that any subsequent calls to poller.Poll() might change the poller's state. In this case, a new token should be created. After the token has been obtained, it can be used to recreate an instance of the originating poller. When resuming a poller, no IO is performed, and zero-value arguments can be used for everything but the Options.ResumeToken. Resume tokens are unique per service client and operation. Attempting to resume a poller for LRO BeginB() with a token from LRO BeginA() will result in an error. The fake package contains types used for constructing in-memory fake servers used in unit tests. This allows writing tests to cover various success/error conditions without the need for connecting to a live service. Please see https://github.com/Azure/azure-sdk-for-go/tree/main/sdk/samples/fakes for details and examples on how to use fakes.
The retryablehttp package provides a familiar HTTP client interface with automatic retries and exponential backoff.
Package pester provides additional resiliency over the standard http client methods by allowing you to control concurrency, retries, and a backoff strategy.
Package retryablehttp provides a familiar HTTP client interface with automatic retries and exponential backoff.
Package sdk is the official AWS SDK for the Go programming language. The AWS SDK for Go provides APIs and utilities that developers can use to build Go applications that use AWS services, such as Amazon Elastic Compute Cloud (Amazon EC2) and Amazon Simple Storage Service (Amazon S3). The SDK removes the complexity of coding directly against a web service interface. It hides a lot of the lower-level plumbing, such as authentication, request retries, and error handling. The SDK also includes helpful utilities on top of the AWS APIs that add additional capabilities and functionality. For example, the Amazon S3 Download and Upload Manager will automatically split up large objects into multiple parts and transfer them concurrently. See the s3manager package documentation for more information. https://docs.aws.amazon.com/sdk-for-go/api/service/s3/s3manager/ Checkout the Getting Started Guide and API Reference Docs detailed the SDK's components and details on each AWS client the SDK supports. The Getting Started Guide provides examples and detailed description of how to get setup with the SDK. https://docs.aws.amazon.com/sdk-for-go/v1/developer-guide/welcome.html The API Reference Docs include a detailed breakdown of the SDK's components such as utilities and AWS clients. Use this as a reference of the Go types included with the SDK, such as AWS clients, API operations, and API parameters. https://docs.aws.amazon.com/sdk-for-go/api/ The SDK is composed of two main components, SDK core, and service clients. The SDK core packages are all available under the aws package at the root of the SDK. Each client for a supported AWS service is available within its own package under the service folder at the root of the SDK. aws - SDK core, provides common shared types such as Config, Logger, and utilities to make working with API parameters easier. awserr - Provides the error interface that the SDK will use for all errors that occur in the SDK's processing. This includes service API response errors as well. The Error type is made up of a code and message. Cast the SDK's returned error type to awserr.Error and call the Code method to compare returned error to specific error codes. See the package's documentation for additional values that can be extracted such as RequestId. credentials - Provides the types and built in credentials providers the SDK will use to retrieve AWS credentials to make API requests with. Nested under this folder are also additional credentials providers such as stscreds for assuming IAM roles, and ec2rolecreds for EC2 Instance roles. endpoints - Provides the AWS Regions and Endpoints metadata for the SDK. Use this to lookup AWS service endpoint information such as which services are in a region, and what regions a service is in. Constants are also provided for all region identifiers, e.g UsWest2RegionID for "us-west-2". session - Provides initial default configuration, and load configuration from external sources such as environment and shared credentials file. request - Provides the API request sending, and retry logic for the SDK. This package also includes utilities for defining your own request retryer, and configuring how the SDK processes the request. service - Clients for AWS services. All services supported by the SDK are available under this folder. The SDK includes the Go types and utilities you can use to make requests to AWS service APIs. Within the service folder at the root of the SDK you'll find a package for each AWS service the SDK supports. All service clients follows a common pattern of creation and usage. When creating a client for an AWS service you'll first need to have a Session value constructed. The Session provides shared configuration that can be shared between your service clients. When service clients are created you can pass in additional configuration via the aws.Config type to override configuration provided by in the Session to create service client instances with custom configuration. Once the service's client is created you can use it to make API requests the AWS service. These clients are safe to use concurrently. In the AWS SDK for Go, you can configure settings for service clients, such as the log level and maximum number of retries. Most settings are optional; however, for each service client, you must specify a region and your credentials. The SDK uses these values to send requests to the correct AWS region and sign requests with the correct credentials. You can specify these values as part of a session or as environment variables. See the SDK's configuration guide for more information. https://docs.aws.amazon.com/sdk-for-go/v1/developer-guide/configuring-sdk.html See the session package documentation for more information on how to use Session with the SDK. https://docs.aws.amazon.com/sdk-for-go/api/aws/session/ See the Config type in the aws package for more information on configuration options. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config When using the SDK you'll generally need your AWS credentials to authenticate with AWS services. The SDK supports multiple methods of supporting these credentials. By default the SDK will source credentials automatically from its default credential chain. See the session package for more information on this chain, and how to configure it. The common items in the credential chain are the following: Environment Credentials - Set of environment variables that are useful when sub processes are created for specific roles. Shared Credentials file (~/.aws/credentials) - This file stores your credentials based on a profile name and is useful for local development. EC2 Instance Role Credentials - Use EC2 Instance Role to assign credentials to application running on an EC2 instance. This removes the need to manage credential files in production. Credentials can be configured in code as well by setting the Config's Credentials value to a custom provider or using one of the providers included with the SDK to bypass the default credential chain and use a custom one. This is helpful when you want to instruct the SDK to only use a specific set of credentials or providers. This example creates a credential provider for assuming an IAM role, "myRoleARN" and configures the S3 service client to use that role for API requests. See the credentials package documentation for more information on credential providers included with the SDK, and how to customize the SDK's usage of credentials. https://docs.aws.amazon.com/sdk-for-go/api/aws/credentials The SDK has support for the shared configuration file (~/.aws/config). This support can be enabled by setting the environment variable, "AWS_SDK_LOAD_CONFIG=1", or enabling the feature in code when creating a Session via the Option's SharedConfigState parameter. In addition to the credentials you'll need to specify the region the SDK will use to make AWS API requests to. In the SDK you can specify the region either with an environment variable, or directly in code when a Session or service client is created. The last value specified in code wins if the region is specified multiple ways. To set the region via the environment variable set the "AWS_REGION" to the region you want to the SDK to use. Using this method to set the region will allow you to run your application in multiple regions without needing additional code in the application to select the region. The endpoints package includes constants for all regions the SDK knows. The values are all suffixed with RegionID. These values are helpful, because they reduce the need to type the region string manually. To set the region on a Session use the aws package's Config struct parameter Region to the AWS region you want the service clients created from the session to use. This is helpful when you want to create multiple service clients, and all of the clients make API requests to the same region. See the endpoints package for the AWS Regions and Endpoints metadata. https://docs.aws.amazon.com/sdk-for-go/api/aws/endpoints/ In addition to setting the region when creating a Session you can also set the region on a per service client bases. This overrides the region of a Session. This is helpful when you want to create service clients in specific regions different from the Session's region. See the Config type in the aws package for more information and additional options such as setting the Endpoint, and other service client configuration options. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config Once the client is created you can make an API request to the service. Each API method takes a input parameter, and returns the service response and an error. The SDK provides methods for making the API call in multiple ways. In this list we'll use the S3 ListObjects API as an example for the different ways of making API requests. ListObjects - Base API operation that will make the API request to the service. ListObjectsRequest - API methods suffixed with Request will construct the API request, but not send it. This is also helpful when you want to get a presigned URL for a request, and share the presigned URL instead of your application making the request directly. ListObjectsPages - Same as the base API operation, but uses a callback to automatically handle pagination of the API's response. ListObjectsWithContext - Same as base API operation, but adds support for the Context pattern. This is helpful for controlling the canceling of in flight requests. See the Go standard library context package for more information. This method also takes request package's Option functional options as the variadic argument for modifying how the request will be made, or extracting information from the raw HTTP response. ListObjectsPagesWithContext - same as ListObjectsPages, but adds support for the Context pattern. Similar to ListObjectsWithContext this method also takes the request package's Option function option types as the variadic argument. In addition to the API operations the SDK also includes several higher level methods that abstract checking for and waiting for an AWS resource to be in a desired state. In this list we'll use WaitUntilBucketExists to demonstrate the different forms of waiters. WaitUntilBucketExists. - Method to make API request to query an AWS service for a resource's state. Will return successfully when that state is accomplished. WaitUntilBucketExistsWithContext - Same as WaitUntilBucketExists, but adds support for the Context pattern. In addition these methods take request package's WaiterOptions to configure the waiter, and how underlying request will be made by the SDK. The API method will document which error codes the service might return for the operation. These errors will also be available as const strings prefixed with "ErrCode" in the service client's package. If there are no errors listed in the API's SDK documentation you'll need to consult the AWS service's API documentation for the errors that could be returned. Pagination helper methods are suffixed with "Pages", and provide the functionality needed to round trip API page requests. Pagination methods take a callback function that will be called for each page of the API's response. Waiter helper methods provide the functionality to wait for an AWS resource state. These methods abstract the logic needed to to check the state of an AWS resource, and wait until that resource is in a desired state. The waiter will block until the resource is in the state that is desired, an error occurs, or the waiter times out. If a resource times out the error code returned will be request.WaiterResourceNotReadyErrorCode. This example shows a complete working Go file which will upload a file to S3 and use the Context pattern to implement timeout logic that will cancel the request if it takes too long. This example highlights how to use sessions, create a service client, make a request, handle the error, and process the response.
Package pester provides additional resiliency over the standard http client methods by allowing you to control concurrency, retries, and a backoff strategy.