Operating System

github.com/go-playground/validator/v10

Package validator implements value validations for structs and individual fields based on tags. It can also handle Cross-Field and Cross-Struct validation for nested structs and has the ability to dive into arrays and maps of any type. see more examples https://github.com/go-playground/validator/tree/master/_examples Validator is designed to be thread-safe and used as a singleton instance. It caches information about your struct and validations, in essence only parsing your validation tags once per struct type. Using multiple instances neglects the benefit of caching. The not thread-safe functions are explicitly marked as such in the documentation. Doing things this way is actually the way the standard library does, see the file.Open method here: The authors return type "error" to avoid the issue discussed in the following, where err is always != nil: Validator only InvalidValidationError for bad validation input, nil or ValidationErrors as type error; so, in your code all you need to do is check if the error returned is not nil, and if it's not check if error is InvalidValidationError ( if necessary, most of the time it isn't ) type cast it to type ValidationErrors like so err.(validator.ValidationErrors). Custom Validation functions can be added. Example: Cross-Field Validation can be done via the following tags: If, however, some custom cross-field validation is required, it can be done using a custom validation. Why not just have cross-fields validation tags (i.e. only eqcsfield and not eqfield)? The reason is efficiency. If you want to check a field within the same struct "eqfield" only has to find the field on the same struct (1 level). But, if we used "eqcsfield" it could be multiple levels down. Example: Multiple validators on a field will process in the order defined. Example: Bad Validator definitions are not handled by the library. Example: Baked In Cross-Field validation only compares fields on the same struct. If Cross-Field + Cross-Struct validation is needed you should implement your own custom validator. Comma (",") is the default separator of validation tags. If you wish to have a comma included within the parameter (i.e. excludesall=,) you will need to use the UTF-8 hex representation 0x2C, which is replaced in the code as a comma, so the above will become excludesall=0x2C. Pipe ("|") is the 'or' validation tags deparator. If you wish to have a pipe included within the parameter i.e. excludesall=| you will need to use the UTF-8 hex representation 0x7C, which is replaced in the code as a pipe, so the above will become excludesall=0x7C Here is a list of the current built in validators: Tells the validation to skip this struct field; this is particularly handy in ignoring embedded structs from being validated. (Usage: -) This is the 'or' operator allowing multiple validators to be used and accepted. (Usage: rgb|rgba) <-- this would allow either rgb or rgba colors to be accepted. This can also be combined with 'and' for example ( Usage: omitempty,rgb|rgba) When a field that is a nested struct is encountered, and contains this flag any validation on the nested struct will be run, but none of the nested struct fields will be validated. This is useful if inside of your program you know the struct will be valid, but need to verify it has been assigned. NOTE: only "required" and "omitempty" can be used on a struct itself. Same as structonly tag except that any struct level validations will not run. Allows conditional validation, for example if a field is not set with a value (Determined by the "required" validator) then other validation such as min or max won't run, but if a value is set validation will run. Allows to skip the validation if the value is nil (same as omitempty, but only for the nil-values). This tells the validator to dive into a slice, array or map and validate that level of the slice, array or map with the validation tags that follow. Multidimensional nesting is also supported, each level you wish to dive will require another dive tag. dive has some sub-tags, 'keys' & 'endkeys', please see the Keys & EndKeys section just below. Example #1 Example #2 Keys & EndKeys These are to be used together directly after the dive tag and tells the validator that anything between 'keys' and 'endkeys' applies to the keys of a map and not the values; think of it like the 'dive' tag, but for map keys instead of values. Multidimensional nesting is also supported, each level you wish to validate will require another 'keys' and 'endkeys' tag. These tags are only valid for maps. Example #1 Example #2 This validates that the value is not the data types default zero value. For numbers ensures value is not zero. For strings ensures value is not "". For booleans ensures value is not false. For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. For structs ensures value is not the zero value when using WithRequiredStructEnabled. The field under validation must be present and not empty only if all the other specified fields are equal to the value following the specified field. For strings ensures value is not "". For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. For structs ensures value is not the zero value. Examples: The field under validation must be present and not empty unless all the other specified fields are equal to the value following the specified field. For strings ensures value is not "". For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. For structs ensures value is not the zero value. Examples: The field under validation must be present and not empty only if any of the other specified fields are present. For strings ensures value is not "". For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. For structs ensures value is not the zero value. Examples: The field under validation must be present and not empty only if all of the other specified fields are present. For strings ensures value is not "". For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. For structs ensures value is not the zero value. Example: The field under validation must be present and not empty only when any of the other specified fields are not present. For strings ensures value is not "". For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. For structs ensures value is not the zero value. Examples: The field under validation must be present and not empty only when all of the other specified fields are not present. For strings ensures value is not "". For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. For structs ensures value is not the zero value. Example: The field under validation must not be present or not empty only if all the other specified fields are equal to the value following the specified field. For strings ensures value is not "". For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. For structs ensures value is not the zero value. Examples: The field under validation must not be present or empty unless all the other specified fields are equal to the value following the specified field. For strings ensures value is not "". For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. For structs ensures value is not the zero value. Examples: This validates that the value is the default value and is almost the opposite of required. For numbers, length will ensure that the value is equal to the parameter given. For strings, it checks that the string length is exactly that number of characters. For slices, arrays, and maps, validates the number of items. Example #1 Example #2 (time.Duration) For time.Duration, len will ensure that the value is equal to the duration given in the parameter. For numbers, max will ensure that the value is less than or equal to the parameter given. For strings, it checks that the string length is at most that number of characters. For slices, arrays, and maps, validates the number of items. Example #1 Example #2 (time.Duration) For time.Duration, max will ensure that the value is less than or equal to the duration given in the parameter. For numbers, min will ensure that the value is greater or equal to the parameter given. For strings, it checks that the string length is at least that number of characters. For slices, arrays, and maps, validates the number of items. Example #1 Example #2 (time.Duration) For time.Duration, min will ensure that the value is greater than or equal to the duration given in the parameter. For strings & numbers, eq will ensure that the value is equal to the parameter given. For slices, arrays, and maps, validates the number of items. Example #1 Example #2 (time.Duration) For time.Duration, eq will ensure that the value is equal to the duration given in the parameter. For strings & numbers, ne will ensure that the value is not equal to the parameter given. For slices, arrays, and maps, validates the number of items. Example #1 Example #2 (time.Duration) For time.Duration, ne will ensure that the value is not equal to the duration given in the parameter. For strings, ints, and uints, oneof will ensure that the value is one of the values in the parameter. The parameter should be a list of values separated by whitespace. Values may be strings or numbers. To match strings with spaces in them, include the target string between single quotes. Kind of like an 'enum'. Works the same as oneof but is case insensitive and therefore only accepts strings. For numbers, this will ensure that the value is greater than the parameter given. For strings, it checks that the string length is greater than that number of characters. For slices, arrays and maps it validates the number of items. Example #1 Example #2 (time.Time) For time.Time ensures the time value is greater than time.Now.UTC(). Example #3 (time.Duration) For time.Duration, gt will ensure that the value is greater than the duration given in the parameter. Same as 'min' above. Kept both to make terminology with 'len' easier. Example #1 Example #2 (time.Time) For time.Time ensures the time value is greater than or equal to time.Now.UTC(). Example #3 (time.Duration) For time.Duration, gte will ensure that the value is greater than or equal to the duration given in the parameter. For numbers, this will ensure that the value is less than the parameter given. For strings, it checks that the string length is less than that number of characters. For slices, arrays, and maps it validates the number of items. Example #1 Example #2 (time.Time) For time.Time ensures the time value is less than time.Now.UTC(). Example #3 (time.Duration) For time.Duration, lt will ensure that the value is less than the duration given in the parameter. Same as 'max' above. Kept both to make terminology with 'len' easier. Example #1 Example #2 (time.Time) For time.Time ensures the time value is less than or equal to time.Now.UTC(). Example #3 (time.Duration) For time.Duration, lte will ensure that the value is less than or equal to the duration given in the parameter. This will validate the field value against another fields value either within a struct or passed in field. Example #1: Example #2: Field Equals Another Field (relative) This does the same as eqfield except that it validates the field provided relative to the top level struct. This will validate the field value against another fields value either within a struct or passed in field. Examples: Field Does Not Equal Another Field (relative) This does the same as nefield except that it validates the field provided relative to the top level struct. Only valid for Numbers, time.Duration and time.Time types, this will validate the field value against another fields value either within a struct or passed in field. usage examples are for validation of a Start and End date: Example #1: Example #2: This does the same as gtfield except that it validates the field provided relative to the top level struct. Only valid for Numbers, time.Duration and time.Time types, this will validate the field value against another fields value either within a struct or passed in field. usage examples are for validation of a Start and End date: Example #1: Example #2: This does the same as gtefield except that it validates the field provided relative to the top level struct. Only valid for Numbers, time.Duration and time.Time types, this will validate the field value against another fields value either within a struct or passed in field. usage examples are for validation of a Start and End date: Example #1: Example #2: This does the same as ltfield except that it validates the field provided relative to the top level struct. Only valid for Numbers, time.Duration and time.Time types, this will validate the field value against another fields value either within a struct or passed in field. usage examples are for validation of a Start and End date: Example #1: Example #2: This does the same as ltefield except that it validates the field provided relative to the top level struct. This does the same as contains except for struct fields. It should only be used with string types. See the behavior of reflect.Value.String() for behavior on other types. This does the same as excludes except for struct fields. It should only be used with string types. See the behavior of reflect.Value.String() for behavior on other types. For arrays & slices, unique will ensure that there are no duplicates. For maps, unique will ensure that there are no duplicate values. For slices of struct, unique will ensure that there are no duplicate values in a field of the struct specified via a parameter. This validates that a string value contains ASCII alpha characters only This validates that a string value contains ASCII alphanumeric characters only This validates that a string value contains unicode alpha characters only This validates that a string value contains unicode alphanumeric characters only This validates that a string value can successfully be parsed into a boolean with strconv.ParseBool This validates that a string value contains number values only. For integers or float it returns true. This validates that a string value contains a basic numeric value. basic excludes exponents etc... for integers or float it returns true. This validates that a string value contains a valid hexadecimal. This validates that a string value contains a valid hex color including hashtag (#) This validates that a string value contains only lowercase characters. An empty string is not a valid lowercase string. This validates that a string value contains only uppercase characters. An empty string is not a valid uppercase string. This validates that a string value contains a valid rgb color This validates that a string value contains a valid rgba color This validates that a string value contains a valid hsl color This validates that a string value contains a valid hsla color This validates that a string value contains a valid E.164 Phone number https://en.wikipedia.org/wiki/E.164 (ex. +1123456789) This validates that a string value contains a valid email This may not conform to all possibilities of any rfc standard, but neither does any email provider accept all possibilities. This validates that a string value is valid JSON This validates that a string value is a valid JWT This validates that a string value contains a valid file path and that the file exists on the machine. This is done using os.Stat, which is a platform independent function. This validates that a string value contains a valid file path and that the file exists on the machine and is an image. This is done using os.Stat and github.com/gabriel-vasile/mimetype This validates that a string value contains a valid file path but does not validate the existence of that file. This is done using os.Stat, which is a platform independent function. This validates that a string value contains a valid url This will accept any url the golang request uri accepts but must contain a schema for example http:// or rtmp:// This validates that a string value contains a valid uri This will accept any uri the golang request uri accepts This validates that a string value contains a valid URN according to the RFC 2141 spec. This validates that a string value contains a valid bas324 value. Although an empty string is valid base32 this will report an empty string as an error, if you wish to accept an empty string as valid you can use this with the omitempty tag. This validates that a string value contains a valid base64 value. Although an empty string is valid base64 this will report an empty string as an error, if you wish to accept an empty string as valid you can use this with the omitempty tag. This validates that a string value contains a valid base64 URL safe value according the RFC4648 spec. Although an empty string is a valid base64 URL safe value, this will report an empty string as an error, if you wish to accept an empty string as valid you can use this with the omitempty tag. This validates that a string value contains a valid base64 URL safe value, but without = padding, according the RFC4648 spec, section 3.2. Although an empty string is a valid base64 URL safe value, this will report an empty string as an error, if you wish to accept an empty string as valid you can use this with the omitempty tag. This validates that a string value contains a valid bitcoin address. The format of the string is checked to ensure it matches one of the three formats P2PKH, P2SH and performs checksum validation. Bitcoin Bech32 Address (segwit) This validates that a string value contains a valid bitcoin Bech32 address as defined by bip-0173 (https://github.com/bitcoin/bips/blob/master/bip-0173.mediawiki) Special thanks to Pieter Wuille for providing reference implementations. This validates that a string value contains a valid ethereum address. The format of the string is checked to ensure it matches the standard Ethereum address format. This validates that a string value contains the substring value. This validates that a string value contains any Unicode code points in the substring value. This validates that a string value contains the supplied rune value. This validates that a string value does not contain the substring value. This validates that a string value does not contain any Unicode code points in the substring value. This validates that a string value does not contain the supplied rune value. This validates that a string value starts with the supplied string value This validates that a string value ends with the supplied string value This validates that a string value does not start with the supplied string value This validates that a string value does not end with the supplied string value This validates that a string value contains a valid isbn10 or isbn13 value. This validates that a string value contains a valid isbn10 value. This validates that a string value contains a valid isbn13 value. This validates that a string value contains a valid UUID. Uppercase UUID values will not pass - use `uuid_rfc4122` instead. This validates that a string value contains a valid version 3 UUID. Uppercase UUID values will not pass - use `uuid3_rfc4122` instead. This validates that a string value contains a valid version 4 UUID. Uppercase UUID values will not pass - use `uuid4_rfc4122` instead. This validates that a string value contains a valid version 5 UUID. Uppercase UUID values will not pass - use `uuid5_rfc4122` instead. This validates that a string value contains a valid ULID value. This validates that a string value contains only ASCII characters. NOTE: if the string is blank, this validates as true. This validates that a string value contains only printable ASCII characters. NOTE: if the string is blank, this validates as true. This validates that a string value contains one or more multibyte characters. NOTE: if the string is blank, this validates as true. This validates that a string value contains a valid DataURI. NOTE: this will also validate that the data portion is valid base64 This validates that a string value contains a valid latitude. This validates that a string value contains a valid longitude. This validates that a string value contains a valid U.S. Social Security Number. This validates that a string value contains a valid IP Address. This validates that a string value contains a valid v4 IP Address. This validates that a string value contains a valid v6 IP Address. This validates that a string value contains a valid CIDR Address. This validates that a string value contains a valid v4 CIDR Address. This validates that a string value contains a valid v6 CIDR Address. This validates that a string value contains a valid resolvable TCP Address. This validates that a string value contains a valid resolvable v4 TCP Address. This validates that a string value contains a valid resolvable v6 TCP Address. This validates that a string value contains a valid resolvable UDP Address. This validates that a string value contains a valid resolvable v4 UDP Address. This validates that a string value contains a valid resolvable v6 UDP Address. This validates that a string value contains a valid resolvable IP Address. This validates that a string value contains a valid resolvable v4 IP Address. This validates that a string value contains a valid resolvable v6 IP Address. This validates that a string value contains a valid Unix Address. This validates that a string value contains a valid MAC Address. Note: See Go's ParseMAC for accepted formats and types: This validates that a string value is a valid Hostname according to RFC 952 https://tools.ietf.org/html/rfc952 This validates that a string value is a valid Hostname according to RFC 1123 https://tools.ietf.org/html/rfc1123 Full Qualified Domain Name (FQDN) This validates that a string value contains a valid FQDN. This validates that a string value appears to be an HTML element tag including those described at https://developer.mozilla.org/en-US/docs/Web/HTML/Element This validates that a string value is a proper character reference in decimal or hexadecimal format This validates that a string value is percent-encoded (URL encoded) according to https://tools.ietf.org/html/rfc3986#section-2.1 This validates that a string value contains a valid directory and that it exists on the machine. This is done using os.Stat, which is a platform independent function. This validates that a string value contains a valid directory but does not validate the existence of that directory. This is done using os.Stat, which is a platform independent function. It is safest to suffix the string with os.PathSeparator if the directory may not exist at the time of validation. This validates that a string value contains a valid DNS hostname and port that can be used to validate fields typically passed to sockets and connections. This validates that a string value is a valid datetime based on the supplied datetime format. Supplied format must match the official Go time format layout as documented in https://golang.org/pkg/time/ This validates that a string value is a valid country code based on iso3166-1 alpha-2 standard. see: https://www.iso.org/iso-3166-country-codes.html This validates that a string value is a valid country code based on iso3166-1 alpha-3 standard. see: https://www.iso.org/iso-3166-country-codes.html This validates that a string value is a valid country code based on iso3166-1 alpha-numeric standard. see: https://www.iso.org/iso-3166-country-codes.html This validates that a string value is a valid BCP 47 language tag, as parsed by language.Parse. More information on https://pkg.go.dev/golang.org/x/text/language BIC (SWIFT code) This validates that a string value is a valid Business Identifier Code (SWIFT code), defined in ISO 9362. More information on https://www.iso.org/standard/60390.html This validates that a string value is a valid dns RFC 1035 label, defined in RFC 1035. More information on https://datatracker.ietf.org/doc/html/rfc1035 This validates that a string value is a valid time zone based on the time zone database present on the system. Although empty value and Local value are allowed by time.LoadLocation golang function, they are not allowed by this validator. More information on https://golang.org/pkg/time/#LoadLocation This validates that a string value is a valid semver version, defined in Semantic Versioning 2.0.0. More information on https://semver.org/ This validates that a string value is a valid cve id, defined in cve mitre. More information on https://cve.mitre.org/ This validates that a string value contains a valid credit card number using Luhn algorithm. This validates that a string or (u)int value contains a valid checksum using the Luhn algorithm. This validates that a string is a valid 24 character hexadecimal string or valid connection string. Example: This validates that a string value contains a valid cron expression. This validates that a string is valid for use with SpiceDb for the indicated purpose. If no purpose is given, a purpose of 'id' is assumed. Alias Validators and Tags NOTE: When returning an error, the tag returned in "FieldError" will be the alias tag unless the dive tag is part of the alias. Everything after the dive tag is not reported as the alias tag. Also, the "ActualTag" in the before case will be the actual tag within the alias that failed. Here is a list of the current built in alias tags: Validator notes: A collection of validation rules that are frequently needed but are more complex than the ones found in the baked in validators. A non standard validator must be registered manually like you would with your own custom validation functions. Example of registration and use: Here is a list of the current non standard validators: This package panics when bad input is provided, this is by design, bad code like that should not make it to production.

v10.23.0 • 5 days ago

github.com/robfig/cron/v3

Package cron implements a cron spec parser and job runner. To download the specific tagged release, run: Import it in your program as: It requires Go 1.11 or later due to usage of Go Modules. Callers may register Funcs to be invoked on a given schedule. Cron will run them in their own goroutines. A cron expression represents a set of times, using 5 space-separated fields. Month and Day-of-week field values are case insensitive. "SUN", "Sun", and "sun" are equally accepted. The specific interpretation of the format is based on the Cron Wikipedia page: https://en.wikipedia.org/wiki/Cron Alternative Cron expression formats support other fields like seconds. You can implement that by creating a custom Parser as follows. Since adding Seconds is the most common modification to the standard cron spec, cron provides a builtin function to do that, which is equivalent to the custom parser you saw earlier, except that its seconds field is REQUIRED: That emulates Quartz, the most popular alternative Cron schedule format: http://www.quartz-scheduler.org/documentation/quartz-2.x/tutorials/crontrigger.html Asterisk ( * ) The asterisk indicates that the cron expression will match for all values of the field; e.g., using an asterisk in the 5th field (month) would indicate every month. Slash ( / ) Slashes are used to describe increments of ranges. For example 3-59/15 in the 1st field (minutes) would indicate the 3rd minute of the hour and every 15 minutes thereafter. The form "*\/..." is equivalent to the form "first-last/...", that is, an increment over the largest possible range of the field. The form "N/..." is accepted as meaning "N-MAX/...", that is, starting at N, use the increment until the end of that specific range. It does not wrap around. Comma ( , ) Commas are used to separate items of a list. For example, using "MON,WED,FRI" in the 5th field (day of week) would mean Mondays, Wednesdays and Fridays. Hyphen ( - ) Hyphens are used to define ranges. For example, 9-17 would indicate every hour between 9am and 5pm inclusive. Question mark ( ? ) Question mark may be used instead of '*' for leaving either day-of-month or day-of-week blank. You may use one of several pre-defined schedules in place of a cron expression. You may also schedule a job to execute at fixed intervals, starting at the time it's added or cron is run. This is supported by formatting the cron spec like this: where "duration" is a string accepted by time.ParseDuration (http://golang.org/pkg/time/#ParseDuration). For example, "@every 1h30m10s" would indicate a schedule that activates after 1 hour, 30 minutes, 10 seconds, and then every interval after that. Note: The interval does not take the job runtime into account. For example, if a job takes 3 minutes to run, and it is scheduled to run every 5 minutes, it will have only 2 minutes of idle time between each run. By default, all interpretation and scheduling is done in the machine's local time zone (time.Local). You can specify a different time zone on construction: Individual cron schedules may also override the time zone they are to be interpreted in by providing an additional space-separated field at the beginning of the cron spec, of the form "CRON_TZ=Asia/Tokyo". For example: The prefix "TZ=(TIME ZONE)" is also supported for legacy compatibility. Be aware that jobs scheduled during daylight-savings leap-ahead transitions will not be run! A Cron runner may be configured with a chain of job wrappers to add cross-cutting functionality to all submitted jobs. For example, they may be used to achieve the following effects: Install wrappers for all jobs added to a cron using the `cron.WithChain` option: Install wrappers for individual jobs by explicitly wrapping them: Since the Cron service runs concurrently with the calling code, some amount of care must be taken to ensure proper synchronization. All cron methods are designed to be correctly synchronized as long as the caller ensures that invocations have a clear happens-before ordering between them. Cron defines a Logger interface that is a subset of the one defined in github.com/go-logr/logr. It has two logging levels (Info and Error), and parameters are key/value pairs. This makes it possible for cron logging to plug into structured logging systems. An adapter, [Verbose]PrintfLogger, is provided to wrap the standard library *log.Logger. For additional insight into Cron operations, verbose logging may be activated which will record job runs, scheduling decisions, and added or removed jobs. Activate it with a one-off logger as follows: Cron entries are stored in an array, sorted by their next activation time. Cron sleeps until the next job is due to be run. Upon waking:

v3.0.1 • 5 years ago

kernel.org/pub/linux/libs/security/libcap/cap

Package cap provides all the Linux Capabilities userspace library API bindings in native Go. Capabilities are a feature of the Linux kernel that allow fine grain permissions to perform privileged operations. Privileged operations are required to do irregular system level operations from code. You can read more about how Capabilities are intended to work here: This package supports native Go bindings for all the features described in that paper as well as supporting subsequent changes to the kernel for other styles of inheritable Capability. Some simple things you can do with this package are: The "cap" package operates with POSIX semantics for security state. That is all OS threads are kept in sync at all times. The package "kernel.org/pub/linux/libs/security/libcap/psx" is used to implement POSIX semantics system calls that manipulate thread state uniformly over the whole Go (and any CGo linked) process runtime. Note, if the Go runtime syscall interface contains the Linux variant syscall.AllThreadsSyscall() API (it debuted in go1.16 see https://github.com/golang/go/issues/1435 for its history) then the "libcap/psx" package will use that to invoke Capability setting system calls in pure Go binaries. With such an enhanced Go runtime, to force this behavior, use the CGO_ENABLED=0 environment variable. POSIX semantics are more secure than trying to manage privilege at a thread level when those threads share a common memory image as they do under Linux: it is trivial to exploit a vulnerability in one thread of a process to cause execution on any another thread. So, any imbalance in security state, in such cases will readily create an opportunity for a privilege escalation vulnerability. POSIX semantics also work well with Go, which deliberately tries to insulate the user from worrying about the number of OS threads that are actually running in their program. Indeed, Go can efficiently launch and manage tens of thousands of concurrent goroutines without bogging the program or wider system down. It does this by aggressively migrating idle threads to make progress on unblocked goroutines. So, inconsistent security state across OS threads can also lead to program misbehavior. The only exception to this process-wide common security state is the cap.Launcher related functionality. This briefly locks an OS thread to a goroutine in order to launch another executable - the robust implementation of this kind of support is quite subtle, so please read its documentation carefully, if you find that you need it. See https://sites.google.com/site/fullycapable/ for recent updates, some more complete walk-through examples of ways of using 'cap.Set's etc and information on how to file bugs. Copyright (c) 2019-21 Andrew G. Morgan <morgan@kernel.org> The cap and psx packages are licensed with a (you choose) BSD 3-clause or GPL2. See LICENSE file for details.

v1.2.72 • 2 weeks ago

github.com/jung-kurt/gofpdf

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. - UTF-8 support - Choice of measurement unit, page format and margins - Page header and footer management - Automatic page breaks, line breaks, and text justification - Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images - Colors, gradients and alpha channel transparency - Outline bookmarks - Internal and external links - TrueType, Type1 and encoding support - Page compression - Lines, Bézier curves, arcs, and ellipses - Rotation, scaling, skewing, translation, and mirroring - Clipping - Document protection - Layers - Templates - Barcodes - Charting facility - Import PDFs as templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. gofpdf supports UTF-8 TrueType fonts and “right-to-left” languages. Note that Chinese, Japanese, and Korean characters may not be included in many general purpose fonts. For these languages, a specialized font (for example, NotoSansSC for simplified Chinese) can be used. Also, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. This repository will not be maintained, at least for some unknown duration. But it is hoped that gofpdf has a bright future in the open source world. Due to Go’s promise of compatibility, gofpdf should continue to function without modification for a longer time than would be the case with many other languages. Forks should be based on the last viable commit. Tools such as active-forks can be used to select a fork that looks promising for your needs. If a particular fork looks like it has taken the lead in attracting followers, this README will be updated to point people in that direction. The efforts of all contributors to this project have been deeply appreciated. Best wishes to all of you. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running go test ./... is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you’ll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory and if the third argument to ComparePDFFiles() in internal/example/example.go is true. (By default it is false.) The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). You should use AddUTF8Font() or AddUTF8FontFromBytes() to add a TrueType UTF-8 encoded font. Use RTL() and LTR() methods switch between “right-to-left” and “left-to-right” mode. In order to use a different non-UTF-8 TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run “go build”. This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include Google Fonts and DejaVu Fonts. The draw2d package is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the contrib directory. Here are guidelines for making submissions. Your change should - be compatible with the MIT License - be properly documented - be formatted with go fmt - include an example in fpdf_test.go if appropriate - conform to the standards of golint and go vet, that is, golint . and go vet . should not generate any warnings - not diminish test coverage Pull requests are the preferred means of accepting your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package’s code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Bruno Michel has provided valuable assistance with the code. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image’s extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Dan Meyers added support for embedded JavaScript. David Fish added a generic alias-replacement function to enable, among other things, table of contents functionality. Andy Bakun identified and corrected a problem in which the internal catalogs were not sorted stably. Paul Montag added encoding and decoding functionality for templates, including images that are embedded in templates; this allows templates to be stored independently of gofpdf. Paul also added support for page boxes used in printing PDF documents. Wojciech Matusiak added supported for word spacing. Artem Korotkiy added support of UTF-8 fonts. Dave Barnes added support for imported objects and templates. Brigham Thompson added support for rounded rectangles. Joe Westcott added underline functionality and optimized image storage. Benoit KUGLER contributed support for rectangles with corners of unequal radius, modification times, and for file attachments and annotations. - Remove all legacy code page font support; use UTF-8 exclusively - Improve test coverage as reported by the coverage tool. Example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

v1.16.2 • 5 years ago

github.com/streadway/amqp

Package amqp is an AMQP 0.9.1 client with RabbitMQ extensions Understand the AMQP 0.9.1 messaging model by reviewing these links first. Much of the terminology in this library directly relates to AMQP concepts. Most other broker clients publish to queues, but in AMQP, clients publish Exchanges instead. AMQP is programmable, meaning that both the producers and consumers agree on the configuration of the broker, instead of requiring an operator or system configuration that declares the logical topology in the broker. The routing between producers and consumer queues is via Bindings. These bindings form the logical topology of the broker. In this library, a message sent from publisher is called a "Publishing" and a message received to a consumer is called a "Delivery". The fields of Publishings and Deliveries are close but not exact mappings to the underlying wire format to maintain stronger types. Many other libraries will combine message properties with message headers. In this library, the message well known properties are strongly typed fields on the Publishings and Deliveries, whereas the user defined headers are in the Headers field. The method naming closely matches the protocol's method name with positional parameters mapping to named protocol message fields. The motivation here is to present a comprehensive view over all possible interactions with the server. Generally, methods that map to protocol methods of the "basic" class will be elided in this interface, and "select" methods of various channel mode selectors will be elided for example Channel.Confirm and Channel.Tx. The library is intentionally designed to be synchronous, where responses for each protocol message are required to be received in an RPC manner. Some methods have a noWait parameter like Channel.QueueDeclare, and some methods are asynchronous like Channel.Publish. The error values should still be checked for these methods as they will indicate IO failures like when the underlying connection closes. Clients of this library may be interested in receiving some of the protocol messages other than Deliveries like basic.ack methods while a channel is in confirm mode. The Notify* methods with Connection and Channel receivers model the pattern of asynchronous events like closes due to exceptions, or messages that are sent out of band from an RPC call like basic.ack or basic.flow. Any asynchronous events, including Deliveries and Publishings must always have a receiver until the corresponding chans are closed. Without asynchronous receivers, the sychronous methods will block. It's important as a client to an AMQP topology to ensure the state of the broker matches your expectations. For both publish and consume use cases, make sure you declare the queues, exchanges and bindings you expect to exist prior to calling Channel.Publish or Channel.Consume. SSL/TLS - Secure connections When Dial encounters an amqps:// scheme, it will use the zero value of a tls.Config. This will only perform server certificate and host verification. Use DialTLS when you wish to provide a client certificate (recommended), include a private certificate authority's certificate in the cert chain for server validity, or run insecure by not verifying the server certificate dial your own connection. DialTLS will use the provided tls.Config when it encounters an amqps:// scheme and will dial a plain connection when it encounters an amqp:// scheme. SSL/TLS in RabbitMQ is documented here: http://www.rabbitmq.com/ssl.html This exports a Session object that wraps this library. It automatically reconnects when the connection fails, and blocks all pushes until the connection succeeds. It also confirms every outgoing message, so none are lost. It doesn't automatically ack each message, but leaves that to the parent process, since it is usage-dependent. Try running this in one terminal, and `rabbitmq-server` in another. Stop & restart RabbitMQ to see how the queue reacts.

v1.1.0 • last year

github.com/gocql/gocql

Package gocql implements a fast and robust Cassandra driver for the Go programming language. Pass a list of initial node IP addresses to NewCluster to create a new cluster configuration: Port can be specified as part of the address, the above is equivalent to: It is recommended to use the value set in the Cassandra config for broadcast_address or listen_address, an IP address not a domain name. This is because events from Cassandra will use the configured IP address, which is used to index connected hosts. If the domain name specified resolves to more than 1 IP address then the driver may connect multiple times to the same host, and will not mark the node being down or up from events. Then you can customize more options (see ClusterConfig): The driver tries to automatically detect the protocol version to use if not set, but you might want to set the protocol version explicitly, as it's not defined which version will be used in certain situations (for example during upgrade of the cluster when some of the nodes support different set of protocol versions than other nodes). The driver advertises the module name and version in the STARTUP message, so servers are able to detect the version. If you use replace directive in go.mod, the driver will send information about the replacement module instead. When ready, create a session from the configuration. Don't forget to Close the session once you are done with it: CQL protocol uses a SASL-based authentication mechanism and so consists of an exchange of server challenges and client response pairs. The details of the exchanged messages depend on the authenticator used. To use authentication, set ClusterConfig.Authenticator or ClusterConfig.AuthProvider. PasswordAuthenticator is provided to use for username/password authentication: It is possible to secure traffic between the client and server with TLS. To use TLS, set the ClusterConfig.SslOpts field. SslOptions embeds *tls.Config so you can set that directly. There are also helpers to load keys/certificates from files. Warning: Due to historical reasons, the SslOptions is insecure by default, so you need to set EnableHostVerification to true if no Config is set. Most users should set SslOptions.Config to a *tls.Config. SslOptions and Config.InsecureSkipVerify interact as follows: For example: To route queries to local DC first, use DCAwareRoundRobinPolicy. For example, if the datacenter you want to primarily connect is called dc1 (as configured in the database): The driver can route queries to nodes that hold data replicas based on partition key (preferring local DC). Note that TokenAwareHostPolicy can take options such as gocql.ShuffleReplicas and gocql.NonLocalReplicasFallback. We recommend running with a token aware host policy in production for maximum performance. The driver can only use token-aware routing for queries where all partition key columns are query parameters. For example, instead of use The DCAwareRoundRobinPolicy can be replaced with RackAwareRoundRobinPolicy, which takes two parameters, datacenter and rack. Instead of dividing hosts with two tiers (local datacenter and remote datacenters) it divides hosts into three (the local rack, the rest of the local datacenter, and everything else). RackAwareRoundRobinPolicy can be combined with TokenAwareHostPolicy in the same way as DCAwareRoundRobinPolicy. Create queries with Session.Query. Query values must not be reused between different executions and must not be modified after starting execution of the query. To execute a query without reading results, use Query.Exec: Single row can be read by calling Query.Scan: Multiple rows can be read using Iter.Scanner: See Example for complete example. The driver automatically prepares DML queries (SELECT/INSERT/UPDATE/DELETE/BATCH statements) and maintains a cache of prepared statements. CQL protocol does not support preparing other query types. When using CQL protocol >= 4, it is possible to use gocql.UnsetValue as the bound value of a column. This will cause the database to ignore writing the column. The main advantage is the ability to keep the same prepared statement even when you don't want to update some fields, where before you needed to make another prepared statement. Session is safe to use from multiple goroutines, so to execute multiple concurrent queries, just execute them from several worker goroutines. Gocql provides synchronously-looking API (as recommended for Go APIs) and the queries are executed asynchronously at the protocol level. Null values are are unmarshalled as zero value of the type. If you need to distinguish for example between text column being null and empty string, you can unmarshal into *string variable instead of string. See Example_nulls for full example. The driver reuses backing memory of slices when unmarshalling. This is an optimization so that a buffer does not need to be allocated for every processed row. However, you need to be careful when storing the slices to other memory structures. When you want to save the data for later use, pass a new slice every time. A common pattern is to declare the slice variable within the scanner loop: The driver supports paging of results with automatic prefetch, see ClusterConfig.PageSize, Session.SetPrefetch, Query.PageSize, and Query.Prefetch. It is also possible to control the paging manually with Query.PageState (this disables automatic prefetch). Manual paging is useful if you want to store the page state externally, for example in a URL to allow users browse pages in a result. You might want to sign/encrypt the paging state when exposing it externally since it contains data from primary keys. Paging state is specific to the CQL protocol version and the exact query used. It is meant as opaque state that should not be modified. If you send paging state from different query or protocol version, then the behaviour is not defined (you might get unexpected results or an error from the server). For example, do not send paging state returned by node using protocol version 3 to a node using protocol version 4. Also, when using protocol version 4, paging state between Cassandra 2.2 and 3.0 is incompatible (https://issues.apache.org/jira/browse/CASSANDRA-10880). The driver does not check whether the paging state is from the same protocol version/statement. You might want to validate yourself as this could be a problem if you store paging state externally. For example, if you store paging state in a URL, the URLs might become broken when you upgrade your cluster. Call Query.PageState(nil) to fetch just the first page of the query results. Pass the page state returned by Iter.PageState to Query.PageState of a subsequent query to get the next page. If the length of slice returned by Iter.PageState is zero, there are no more pages available (or an error occurred). Using too low values of PageSize will negatively affect performance, a value below 100 is probably too low. While Cassandra returns exactly PageSize items (except for last page) in a page currently, the protocol authors explicitly reserved the right to return smaller or larger amount of items in a page for performance reasons, so don't rely on the page having the exact count of items. See Example_paging for an example of manual paging. There are certain situations when you don't know the list of columns in advance, mainly when the query is supplied by the user. Iter.Columns, Iter.RowData, Iter.MapScan and Iter.SliceMap can be used to handle this case. See Example_dynamicColumns. The CQL protocol supports sending batches of DML statements (INSERT/UPDATE/DELETE) and so does gocql. Use Session.NewBatch to create a new batch and then fill-in details of individual queries. Then execute the batch with Session.ExecuteBatch. Logged batches ensure atomicity, either all or none of the operations in the batch will succeed, but they have overhead to ensure this property. Unlogged batches don't have the overhead of logged batches, but don't guarantee atomicity. Updates of counters are handled specially by Cassandra so batches of counter updates have to use CounterBatch type. A counter batch can only contain statements to update counters. For unlogged batches it is recommended to send only single-partition batches (i.e. all statements in the batch should involve only a single partition). Multi-partition batch needs to be split by the coordinator node and re-sent to correct nodes. With single-partition batches you can send the batch directly to the node for the partition without incurring the additional network hop. It is also possible to pass entire BEGIN BATCH .. APPLY BATCH statement to Query.Exec. There are differences how those are executed. BEGIN BATCH statement passed to Query.Exec is prepared as a whole in a single statement. Session.ExecuteBatch prepares individual statements in the batch. If you have variable-length batches using the same statement, using Session.ExecuteBatch is more efficient. See Example_batch for an example. Query.ScanCAS or Query.MapScanCAS can be used to execute a single-statement lightweight transaction (an INSERT/UPDATE .. IF statement) and reading its result. See example for Query.MapScanCAS. Multiple-statement lightweight transactions can be executed as a logged batch that contains at least one conditional statement. All the conditions must return true for the batch to be applied. You can use Session.ExecuteBatchCAS and Session.MapExecuteBatchCAS when executing the batch to learn about the result of the LWT. See example for Session.MapExecuteBatchCAS. Queries can be marked as idempotent. Marking the query as idempotent tells the driver that the query can be executed multiple times without affecting its result. Non-idempotent queries are not eligible for retrying nor speculative execution. Idempotent queries are retried in case of errors based on the configured RetryPolicy. Queries can be retried even before they fail by setting a SpeculativeExecutionPolicy. The policy can cause the driver to retry on a different node if the query is taking longer than a specified delay even before the driver receives an error or timeout from the server. When a query is speculatively executed, the original execution is still executing. The two parallel executions of the query race to return a result, the first received result will be returned. UDTs can be mapped (un)marshaled from/to map[string]interface{} a Go struct (or a type implementing UDTUnmarshaler, UDTMarshaler, Unmarshaler or Marshaler interfaces). For structs, cql tag can be used to specify the CQL field name to be mapped to a struct field: See Example_userDefinedTypesMap, Example_userDefinedTypesStruct, ExampleUDTMarshaler, ExampleUDTUnmarshaler. It is possible to provide observer implementations that could be used to gather metrics: CQL protocol also supports tracing of queries. When enabled, the database will write information about internal events that happened during execution of the query. You can use Query.Trace to request tracing and receive the session ID that the database used to store the trace information in system_traces.sessions and system_traces.events tables. NewTraceWriter returns an implementation of Tracer that writes the events to a writer. Gathering trace information might be essential for debugging and optimizing queries, but writing traces has overhead, so this feature should not be used on production systems with very high load unless you know what you are doing. Example_batch demonstrates how to execute a batch of statements. Example_dynamicColumns demonstrates how to handle dynamic column list. Example_marshalerUnmarshaler demonstrates how to implement a Marshaler and Unmarshaler. Example_nulls demonstrates how to distinguish between null and zero value when needed. Null values are unmarshalled as zero value of the type. If you need to distinguish for example between text column being null and empty string, you can unmarshal into *string field. Example_paging demonstrates how to manually fetch pages and use page state. See also package documentation about paging. Example_set demonstrates how to use sets. Example_userDefinedTypesMap demonstrates how to work with user-defined types as maps. See also Example_userDefinedTypesStruct and examples for UDTMarshaler and UDTUnmarshaler if you want to map to structs. Example_userDefinedTypesStruct demonstrates how to work with user-defined types as structs. See also examples for UDTMarshaler and UDTUnmarshaler if you need more control/better performance.

v1.7.0 • 2 months ago

github.com/aws/aws-sdk-go-v2/service/kms

Package kms provides the API client, operations, and parameter types for AWS Key Management Service. Key Management Service (KMS) is an encryption and key management web service. This guide describes the KMS operations that you can call programmatically. For general information about KMS, see the Key Management Service Developer Guide. KMS has replaced the term customer master key (CMK) with KMS key and KMS key. The concept has not changed. To prevent breaking changes, KMS is keeping some variations of this term. Amazon Web Services provides SDKs that consist of libraries and sample code for various programming languages and platforms (Java, Ruby, .Net, macOS, Android, etc.). The SDKs provide a convenient way to create programmatic access to KMS and other Amazon Web Services services. For example, the SDKs take care of tasks such as signing requests (see below), managing errors, and retrying requests automatically. For more information about the Amazon Web Services SDKs, including how to download and install them, see Tools for Amazon Web Services. We recommend that you use the Amazon Web Services SDKs to make programmatic API calls to KMS. If you need to use FIPS 140-2 validated cryptographic modules when communicating with Amazon Web Services, use the FIPS endpoint in your preferred Amazon Web Services Region. For more information about the available FIPS endpoints, see Service endpointsin the Key Management Service topic of the Amazon Web Services General Reference. All KMS API calls must be signed and be transmitted using Transport Layer Security (TLS). KMS recommends you always use the latest supported TLS version. Clients must also support cipher suites with Perfect Forward Secrecy (PFS) such as Ephemeral Diffie-Hellman (DHE) or Elliptic Curve Ephemeral Diffie-Hellman (ECDHE). Most modern systems such as Java 7 and later support these modes. Requests must be signed using an access key ID and a secret access key. We strongly recommend that you do not use your Amazon Web Services account root access key ID and secret access key for everyday work. You can use the access key ID and secret access key for an IAM user or you can use the Security Token Service (STS) to generate temporary security credentials and use those to sign requests. All KMS requests must be signed with Signature Version 4. KMS supports CloudTrail, a service that logs Amazon Web Services API calls and related events for your Amazon Web Services account and delivers them to an Amazon S3 bucket that you specify. By using the information collected by CloudTrail, you can determine what requests were made to KMS, who made the request, when it was made, and so on. To learn more about CloudTrail, including how to turn it on and find your log files, see the CloudTrail User Guide. For more information about credentials and request signing, see the following: Amazon Web Services Security Credentials Temporary Security Credentials Signature Version 4 Signing Process Of the API operations discussed in this guide, the following will prove the most useful for most applications. You will likely perform operations other than these, such as creating keys and assigning policies, by using the console.

v1.37.6 • 3 days ago

github.com/aws/aws-sdk-go-v2/service/lambda

Package lambda provides the API client, operations, and parameter types for AWS Lambda. Lambda is a compute service that lets you run code without provisioning or managing servers. Lambda runs your code on a high-availability compute infrastructure and performs all of the administration of the compute resources, including server and operating system maintenance, capacity provisioning and automatic scaling, code monitoring and logging. With Lambda, you can run code for virtually any type of application or backend service. For more information about the Lambda service, see What is Lambdain the Lambda Developer Guide. The Lambda API Reference provides information about each of the API methods, including details about the parameters in each API request and response. You can use Software Development Kits (SDKs), Integrated Development Environment (IDE) Toolkits, and command line tools to access the API. For installation instructions, see Tools for Amazon Web Services. For a list of Region-specific endpoints that Lambda supports, see Lambda endpoints and quotas in the Amazon Web Services General Reference.. When making the API calls, you will need to authenticate your request by providing a signature. Lambda supports signature version 4. For more information, see Signature Version 4 signing processin the Amazon Web Services General Reference.. Because Amazon Web Services SDKs use the CA certificates from your computer, changes to the certificates on the Amazon Web Services servers can cause connection failures when you attempt to use an SDK. You can prevent these failures by keeping your computer's CA certificates and operating system up-to-date. If you encounter this issue in a corporate environment and do not manage your own computer, you might need to ask an administrator to assist with the update process. The following list shows minimum operating system and Java versions: Microsoft Windows versions that have updates from January 2005 or later installed contain at least one of the required CAs in their trust list. Mac OS X 10.4 with Java for Mac OS X 10.4 Release 5 (February 2007), Mac OS X 10.5 (October 2007), and later versions contain at least one of the required CAs in their trust list. Red Hat Enterprise Linux 5 (March 2007), 6, and 7 and CentOS 5, 6, and 7 all contain at least one of the required CAs in their default trusted CA list. Java 1.4.2_12 (May 2006), 5 Update 2 (March 2005), and all later versions, including Java 6 (December 2006), 7, and 8, contain at least one of the required CAs in their default trusted CA list. When accessing the Lambda management console or Lambda API endpoints, whether through browsers or programmatically, you will need to ensure your client machines support any of the following CAs: Amazon Root CA 1 Starfield Services Root Certificate Authority - G2 Starfield Class 2 Certification Authority Root certificates from the first two authorities are available from Amazon trust services, but keeping your computer up-to-date is the more straightforward solution. To learn more about ACM-provided certificates, see Amazon Web Services Certificate Manager FAQs.

v1.54.3 • 6 months ago

bazil.org/fuse

Package fuse enables writing FUSE file systems on Linux and FreeBSD. There are two approaches to writing a FUSE file system. The first is to speak the low-level message protocol, reading from a Conn using ReadRequest and writing using the various Respond methods. This approach is closest to the actual interaction with the kernel and can be the simplest one in contexts such as protocol translators. Servers of synthesized file systems tend to share common bookkeeping abstracted away by the second approach, which is to call fs.Serve to serve the FUSE protocol using an implementation of the service methods in the interfaces FS* (file system), Node* (file or directory), and Handle* (opened file or directory). There are a daunting number of such methods that can be written, but few are required. The specific methods are described in the documentation for those interfaces. The examples/hellofs subdirectory contains a simple illustration of the fs.Serve approach. The required and optional methods for the FS, Node, and Handle interfaces have the general form where Op is the name of a FUSE operation. Op reads request parameters from req and writes results to resp. An operation whose only result is the error result omits the resp parameter. Multiple goroutines may call service methods simultaneously; the methods being called are responsible for appropriate synchronization. The operation must not hold on to the request or response, including any []byte fields such as WriteRequest.Data or SetxattrRequest.Xattr. Operations can return errors. The FUSE interface can only communicate POSIX errno error numbers to file system clients, the message is not visible to file system clients. The returned error can implement ErrorNumber to control the errno returned. Without ErrorNumber, a generic errno (EIO) is returned. Error messages will be visible in the debug log as part of the response. In some file systems, some operations may take an undetermined amount of time. For example, a Read waiting for a network message or a matching Write might wait indefinitely. If the request is cancelled and no longer needed, the context will be cancelled. Blocking operations should select on a receive from ctx.Done() and attempt to abort the operation early if the receive succeeds (meaning the channel is closed). To indicate that the operation failed because it was aborted, return syscall.EINTR. If an operation does not block for an indefinite amount of time, supporting cancellation is not necessary. All requests types embed a Header, meaning that the method can inspect req.Pid, req.Uid, and req.Gid as necessary to implement permission checking. The kernel FUSE layer normally prevents other users from accessing the FUSE file system (to change this, see AllowOther), but does not enforce access modes (to change this, see DefaultPermissions). Behavior and metadata of the mounted file system can be changed by passing MountOption values to Mount.

v0.0.0-20230120002735-62a210ff1fd5 • 2 years ago

github.com/lni/dragonboat/v3

Package dragonboat is a multi-group Raft implementation. The NodeHost struct is the facade interface for all features provided by the dragonboat package. Each NodeHost instance usually runs on a separate host managing its CPU, storage and network resources. Each NodeHost can manage Raft nodes from many different Raft groups known as Raft clusters. Each Raft cluster is identified by its ClusterID and it usually consists of multiple nodes, each identified its NodeID value. Nodes from the same Raft cluster can be considered as replicas of the same data, they are suppose to be distributed on different NodeHost instances across the network, this brings fault tolerance to machine and network failures as application data stored in the Raft cluster will be available as long as the majority of its managing NodeHost instances (i.e. its underlying hosts) are available. User applications can leverage the power of the Raft protocol implemented in dragonboat by implementing the IStateMachine or IOnDiskStateMachine component, as defined in github.com/lni/dragonboat/v3/statemachine. Known as user state machines, each IStateMachine and IOnDiskStateMachine instance is in charge of updating, querying and snapshotting application data with minimum exposure to the complexity of the Raft protocol implementation. User applications can use NodeHost's APIs to update the state of their IStateMachine or IOnDiskStateMachine instances, this is called making proposals. Once accepted by the majority nodes of a Raft cluster, the proposal is considered as committed and it will be applied on all member nodes of the Raft cluster. Applications can also make linearizable reads to query the state of the IStateMachine or IOnDiskStateMachine instances. Dragonboat employs the ReadIndex protocol invented by Diego Ongaro for fast linearizable reads. Dragonboat guarantees the linearizability of your I/O when interacting with the IStateMachine or IOnDiskStateMachine instances. In plain English, writes (via making proposal) to your Raft cluster appears to be instantaneous, once a write is completed, all later reads (linearizable read using the ReadIndex protocol as implemented and provided in dragonboat) should return the value of that write or a later write. Once a value is returned by a linearizable read, all later reads should return the same value or the result of a later write. To strictly provide such guarantee, we need to implement the at-most-once semantic required by linearizability. For a client, when it retries the proposal that failed to complete before its deadline during the previous attempt, it has the risk to have the same proposal committed and applied twice into the user state machine. Dragonboat prevents this by implementing the client session concept described in Diego Ongaro's PhD thesis. Arbitrary number of Raft clusters can be launched across the network simultaneously to aggregate distributed processing and storage capacities. Users can also make membership change requests to add or remove nodes from any interested Raft cluster. NodeHost APIs for making the above mentioned requests can be loosely classified into two categories, synchronous and asynchronous APIs. Synchronous APIs will not return until the completion of the requested operation. Their method names all start with Sync*. The asynchronous counterparts of such synchronous APIs, on the other hand, usually return immediately. This allows users to concurrently initiate multiple such asynchronous operations to save the total amount of time required to complete all of them. Dragonboat is a feature complete Multi-Group Raft implementation - snapshotting, membership change, leadership transfer, non-voting members and disk based state machine are all provided. Dragonboat is also extensively optimized. The Raft protocol implementation is fully pipelined, meaning proposals can start before the completion of previous proposals. This is critical for system throughput in high latency environment. Dragonboat is also fully batched, internal operations are batched whenever possible to maximize the overall throughput.

v3.3.8 • last year

github.com/inconshreveable/log15

Package log15 provides an opinionated, simple toolkit for best-practice logging that is both human and machine readable. It is modeled after the standard library's io and net/http packages. This package enforces you to only log key/value pairs. Keys must be strings. Values may be any type that you like. The default output format is logfmt, but you may also choose to use JSON instead if that suits you. Here's how you log: This will output a line that looks like: To get started, you'll want to import the library: Now you're ready to start logging: Because recording a human-meaningful message is common and good practice, the first argument to every logging method is the value to the *implicit* key 'msg'. Additionally, the level you choose for a message will be automatically added with the key 'lvl', and so will the current timestamp with key 't'. You may supply any additional context as a set of key/value pairs to the logging function. log15 allows you to favor terseness, ordering, and speed over safety. This is a reasonable tradeoff for logging functions. You don't need to explicitly state keys/values, log15 understands that they alternate in the variadic argument list: If you really do favor your type-safety, you may choose to pass a log.Ctx instead: Frequently, you want to add context to a logger so that you can track actions associated with it. An http request is a good example. You can easily create new loggers that have context that is automatically included with each log line: This will output a log line that includes the path context that is attached to the logger: The Handler interface defines where log lines are printed to and how they are formated. Handler is a single interface that is inspired by net/http's handler interface: Handlers can filter records, format them, or dispatch to multiple other Handlers. This package implements a number of Handlers for common logging patterns that are easily composed to create flexible, custom logging structures. Here's an example handler that prints logfmt output to Stdout: Here's an example handler that defers to two other handlers. One handler only prints records from the rpc package in logfmt to standard out. The other prints records at Error level or above in JSON formatted output to the file /var/log/service.json This package implements three Handlers that add debugging information to the context, CallerFileHandler, CallerFuncHandler and CallerStackHandler. Here's an example that adds the source file and line number of each logging call to the context. This will output a line that looks like: Here's an example that logs the call stack rather than just the call site. This will output a line that looks like: The "%+v" format instructs the handler to include the path of the source file relative to the compile time GOPATH. The github.com/go-stack/stack package documents the full list of formatting verbs and modifiers available. The Handler interface is so simple that it's also trivial to write your own. Let's create an example handler which tries to write to one handler, but if that fails it falls back to writing to another handler and includes the error that it encountered when trying to write to the primary. This might be useful when trying to log over a network socket, but if that fails you want to log those records to a file on disk. This pattern is so useful that a generic version that handles an arbitrary number of Handlers is included as part of this library called FailoverHandler. Sometimes, you want to log values that are extremely expensive to compute, but you don't want to pay the price of computing them if you haven't turned up your logging level to a high level of detail. This package provides a simple type to annotate a logging operation that you want to be evaluated lazily, just when it is about to be logged, so that it would not be evaluated if an upstream Handler filters it out. Just wrap any function which takes no arguments with the log.Lazy type. For example: If this message is not logged for any reason (like logging at the Error level), then factorRSAKey is never evaluated. The same log.Lazy mechanism can be used to attach context to a logger which you want to be evaluated when the message is logged, but not when the logger is created. For example, let's imagine a game where you have Player objects: You always want to log a player's name and whether they're alive or dead, so when you create the player object, you might do: Only now, even after a player has died, the logger will still report they are alive because the logging context is evaluated when the logger was created. By using the Lazy wrapper, we can defer the evaluation of whether the player is alive or not to each log message, so that the log records will reflect the player's current state no matter when the log message is written: If log15 detects that stdout is a terminal, it will configure the default handler for it (which is log.StdoutHandler) to use TerminalFormat. This format logs records nicely for your terminal, including color-coded output based on log level. Becasuse log15 allows you to step around the type system, there are a few ways you can specify invalid arguments to the logging functions. You could, for example, wrap something that is not a zero-argument function with log.Lazy or pass a context key that is not a string. Since logging libraries are typically the mechanism by which errors are reported, it would be onerous for the logging functions to return errors. Instead, log15 handles errors by making these guarantees to you: - Any log record containing an error will still be printed with the error explained to you as part of the log record. - Any log record containing an error will include the context key LOG15_ERROR, enabling you to easily (and if you like, automatically) detect if any of your logging calls are passing bad values. Understanding this, you might wonder why the Handler interface can return an error value in its Log method. Handlers are encouraged to return errors only if they fail to write their log records out to an external source like if the syslog daemon is not responding. This allows the construction of useful handlers which cope with those failures like the FailoverHandler. log15 is intended to be useful for library authors as a way to provide configurable logging to users of their library. Best practice for use in a library is to always disable all output for your logger by default and to provide a public Logger instance that consumers of your library can configure. Like so: Users of your library may then enable it if they like: The ability to attach context to a logger is a powerful one. Where should you do it and why? I favor embedding a Logger directly into any persistent object in my application and adding unique, tracing context keys to it. For instance, imagine I am writing a web browser: When a new tab is created, I assign a logger to it with the url of the tab as context so it can easily be traced through the logs. Now, whenever we perform any operation with the tab, we'll log with its embedded logger and it will include the tab title automatically: There's only one problem. What if the tab url changes? We could use log.Lazy to make sure the current url is always written, but that would mean that we couldn't trace a tab's full lifetime through our logs after the user navigate to a new URL. Instead, think about what values to attach to your loggers the same way you think about what to use as a key in a SQL database schema. If it's possible to use a natural key that is unique for the lifetime of the object, do so. But otherwise, log15's ext package has a handy RandId function to let you generate what you might call "surrogate keys" They're just random hex identifiers to use for tracing. Back to our Tab example, we would prefer to set up our Logger like so: Now we'll have a unique traceable identifier even across loading new urls, but we'll still be able to see the tab's current url in the log messages. For all Handler functions which can return an error, there is a version of that function which will return no error but panics on failure. They are all available on the Must object. For example: All of the following excellent projects inspired the design of this library: code.google.com/p/log4go github.com/op/go-logging github.com/technoweenie/grohl github.com/Sirupsen/logrus github.com/kr/logfmt github.com/spacemonkeygo/spacelog golang's stdlib, notably io and net/http https://xkcd.com/927/

v2.16.0+incompatible • 2 years ago

gopkg.in/inconshreveable/log15.v2

Package log15 provides an opinionated, simple toolkit for best-practice logging that is both human and machine readable. It is modeled after the standard library's io and net/http packages. This package enforces you to only log key/value pairs. Keys must be strings. Values may be any type that you like. The default output format is logfmt, but you may also choose to use JSON instead if that suits you. Here's how you log: This will output a line that looks like: To get started, you'll want to import the library: Now you're ready to start logging: Because recording a human-meaningful message is common and good practice, the first argument to every logging method is the value to the *implicit* key 'msg'. Additionally, the level you choose for a message will be automatically added with the key 'lvl', and so will the current timestamp with key 't'. You may supply any additional context as a set of key/value pairs to the logging function. log15 allows you to favor terseness, ordering, and speed over safety. This is a reasonable tradeoff for logging functions. You don't need to explicitly state keys/values, log15 understands that they alternate in the variadic argument list: If you really do favor your type-safety, you may choose to pass a log.Ctx instead: Frequently, you want to add context to a logger so that you can track actions associated with it. An http request is a good example. You can easily create new loggers that have context that is automatically included with each log line: This will output a log line that includes the path context that is attached to the logger: The Handler interface defines where log lines are printed to and how they are formated. Handler is a single interface that is inspired by net/http's handler interface: Handlers can filter records, format them, or dispatch to multiple other Handlers. This package implements a number of Handlers for common logging patterns that are easily composed to create flexible, custom logging structures. Here's an example handler that prints logfmt output to Stdout: Here's an example handler that defers to two other handlers. One handler only prints records from the rpc package in logfmt to standard out. The other prints records at Error level or above in JSON formatted output to the file /var/log/service.json This package implements three Handlers that add debugging information to the context, CallerFileHandler, CallerFuncHandler and CallerStackHandler. Here's an example that adds the source file and line number of each logging call to the context. This will output a line that looks like: Here's an example that logs the call stack rather than just the call site. This will output a line that looks like: The "%+v" format instructs the handler to include the path of the source file relative to the compile time GOPATH. The github.com/go-stack/stack package documents the full list of formatting verbs and modifiers available. The Handler interface is so simple that it's also trivial to write your own. Let's create an example handler which tries to write to one handler, but if that fails it falls back to writing to another handler and includes the error that it encountered when trying to write to the primary. This might be useful when trying to log over a network socket, but if that fails you want to log those records to a file on disk. This pattern is so useful that a generic version that handles an arbitrary number of Handlers is included as part of this library called FailoverHandler. Sometimes, you want to log values that are extremely expensive to compute, but you don't want to pay the price of computing them if you haven't turned up your logging level to a high level of detail. This package provides a simple type to annotate a logging operation that you want to be evaluated lazily, just when it is about to be logged, so that it would not be evaluated if an upstream Handler filters it out. Just wrap any function which takes no arguments with the log.Lazy type. For example: If this message is not logged for any reason (like logging at the Error level), then factorRSAKey is never evaluated. The same log.Lazy mechanism can be used to attach context to a logger which you want to be evaluated when the message is logged, but not when the logger is created. For example, let's imagine a game where you have Player objects: You always want to log a player's name and whether they're alive or dead, so when you create the player object, you might do: Only now, even after a player has died, the logger will still report they are alive because the logging context is evaluated when the logger was created. By using the Lazy wrapper, we can defer the evaluation of whether the player is alive or not to each log message, so that the log records will reflect the player's current state no matter when the log message is written: If log15 detects that stdout is a terminal, it will configure the default handler for it (which is log.StdoutHandler) to use TerminalFormat. This format logs records nicely for your terminal, including color-coded output based on log level. Becasuse log15 allows you to step around the type system, there are a few ways you can specify invalid arguments to the logging functions. You could, for example, wrap something that is not a zero-argument function with log.Lazy or pass a context key that is not a string. Since logging libraries are typically the mechanism by which errors are reported, it would be onerous for the logging functions to return errors. Instead, log15 handles errors by making these guarantees to you: - Any log record containing an error will still be printed with the error explained to you as part of the log record. - Any log record containing an error will include the context key LOG15_ERROR, enabling you to easily (and if you like, automatically) detect if any of your logging calls are passing bad values. Understanding this, you might wonder why the Handler interface can return an error value in its Log method. Handlers are encouraged to return errors only if they fail to write their log records out to an external source like if the syslog daemon is not responding. This allows the construction of useful handlers which cope with those failures like the FailoverHandler. log15 is intended to be useful for library authors as a way to provide configurable logging to users of their library. Best practice for use in a library is to always disable all output for your logger by default and to provide a public Logger instance that consumers of your library can configure. Like so: Users of your library may then enable it if they like: The ability to attach context to a logger is a powerful one. Where should you do it and why? I favor embedding a Logger directly into any persistent object in my application and adding unique, tracing context keys to it. For instance, imagine I am writing a web browser: When a new tab is created, I assign a logger to it with the url of the tab as context so it can easily be traced through the logs. Now, whenever we perform any operation with the tab, we'll log with its embedded logger and it will include the tab title automatically: There's only one problem. What if the tab url changes? We could use log.Lazy to make sure the current url is always written, but that would mean that we couldn't trace a tab's full lifetime through our logs after the user navigate to a new URL. Instead, think about what values to attach to your loggers the same way you think about what to use as a key in a SQL database schema. If it's possible to use a natural key that is unique for the lifetime of the object, do so. But otherwise, log15's ext package has a handy RandId function to let you generate what you might call "surrogate keys" They're just random hex identifiers to use for tracing. Back to our Tab example, we would prefer to set up our Logger like so: Now we'll have a unique traceable identifier even across loading new urls, but we'll still be able to see the tab's current url in the log messages. For all Handler functions which can return an error, there is a version of that function which will return no error but panics on failure. They are all available on the Must object. For example: All of the following excellent projects inspired the design of this library: code.google.com/p/log4go github.com/op/go-logging github.com/technoweenie/grohl github.com/Sirupsen/logrus github.com/kr/logfmt github.com/spacemonkeygo/spacelog golang's stdlib, notably io and net/http https://xkcd.com/927/

v2.16.0 • 2 years ago

github.com/aws/aws-sdk-go-v2/service/appconfig

Package appconfig provides the API client, operations, and parameter types for Amazon AppConfig. AppConfig feature flags and dynamic configurations help software builders quickly and securely adjust application behavior in production environments without full code deployments. AppConfig speeds up software release frequency, improves application resiliency, and helps you address emergent issues more quickly. With feature flags, you can gradually release new capabilities to users and measure the impact of those changes before fully deploying the new capabilities to all users. With operational flags and dynamic configurations, you can update block lists, allow lists, throttling limits, logging verbosity, and perform other operational tuning to quickly respond to issues in production environments. AppConfig is a capability of Amazon Web Services Systems Manager. Despite the fact that application configuration content can vary greatly from application to application, AppConfig supports the following use cases, which cover a broad spectrum of customer needs: Feature flags and toggles - Safely release new capabilities to your customers in a controlled environment. Instantly roll back changes if you experience a problem. Application tuning - Carefully introduce application changes while testing the impact of those changes with users in production environments. Allow list or block list - Control access to premium features or instantly block specific users without deploying new code. Centralized configuration storage - Keep your configuration data organized and consistent across all of your workloads. You can use AppConfig to deploy configuration data stored in the AppConfig hosted configuration store, Secrets Manager, Systems Manager, Parameter Store, or Amazon S3. This section provides a high-level description of how AppConfig works and how you get started. 1. Identify configuration values in code you want to manage in the cloud Before you start creating AppConfig artifacts, we recommend you identify configuration data in your code that you want to dynamically manage using AppConfig. Good examples include feature flags or toggles, allow and block lists, logging verbosity, service limits, and throttling rules, to name a few. If your configuration data already exists in the cloud, you can take advantage of AppConfig validation, deployment, and extension features to further streamline configuration data management. 2. Create an application namespace To create a namespace, you create an AppConfig artifact called an application. An application is simply an organizational construct like a folder. 3. Create environments For each AppConfig application, you define one or more environments. An environment is a logical grouping of targets, such as applications in a Beta or Production environment, Lambda functions, or containers. You can also define environments for application subcomponents, such as the Web , Mobile , and Back-end . You can configure Amazon CloudWatch alarms for each environment. The system monitors alarms during a configuration deployment. If an alarm is triggered, the system rolls back the configuration. 4. Create a configuration profile A configuration profile includes, among other things, a URI that enables AppConfig to locate your configuration data in its stored location and a profile type. AppConfig supports two configuration profile types: feature flags and freeform configurations. Feature flag configuration profiles store their data in the AppConfig hosted configuration store and the URI is simply hosted . For freeform configuration profiles, you can store your data in the AppConfig hosted configuration store or any Amazon Web Services service that integrates with AppConfig, as described in Creating a free form configuration profilein the the AppConfig User Guide. A configuration profile can also include optional validators to ensure your configuration data is syntactically and semantically correct. AppConfig performs a check using the validators when you start a deployment. If any errors are detected, the deployment rolls back to the previous configuration data. 5. Deploy configuration data When you create a new deployment, you specify the following: An application ID A configuration profile ID A configuration version An environment ID where you want to deploy the configuration data A deployment strategy ID that defines how fast you want the changes to take effect When you call the StartDeployment API action, AppConfig performs the following tasks: Retrieves the configuration data from the underlying data store by using the location URI in the configuration profile. Verifies the configuration data is syntactically and semantically correct by using the validators you specified when you created your configuration profile. Caches a copy of the data so it is ready to be retrieved by your application. This cached copy is called the deployed data. 6. Retrieve the configuration You can configure AppConfig Agent as a local host and have the agent poll AppConfig for configuration updates. The agent calls the StartConfigurationSessionand GetLatestConfiguration API actions and caches your configuration data locally. To retrieve the data, your application makes an HTTP call to the localhost server. AppConfig Agent supports several use cases, as described in Simplified retrieval methodsin the the AppConfig User Guide. If AppConfig Agent isn't supported for your use case, you can configure your application to poll AppConfig for configuration updates by directly calling the StartConfigurationSession and GetLatestConfigurationAPI actions. This reference is intended to be used with the AppConfig User Guide.

v1.36.0 • 3 days ago

github.com/rabbitmq/amqp091-go

Package amqp091 is an AMQP 0.9.1 client with RabbitMQ extensions Understand the AMQP 0.9.1 messaging model by reviewing these links first. Much of the terminology in this library directly relates to AMQP concepts. Most other broker clients publish to queues, but in AMQP, clients publish Exchanges instead. AMQP is programmable, meaning that both the producers and consumers agree on the configuration of the broker, instead of requiring an operator or system configuration that declares the logical topology in the broker. The routing between producers and consumer queues is via Bindings. These bindings form the logical topology of the broker. In this library, a message sent from publisher is called a "Publishing" and a message received to a consumer is called a "Delivery". The fields of Publishings and Deliveries are close but not exact mappings to the underlying wire format to maintain stronger types. Many other libraries will combine message properties with message headers. In this library, the message well known properties are strongly typed fields on the Publishings and Deliveries, whereas the user defined headers are in the Headers field. The method naming closely matches the protocol's method name with positional parameters mapping to named protocol message fields. The motivation here is to present a comprehensive view over all possible interactions with the server. Generally, methods that map to protocol methods of the "basic" class will be elided in this interface, and "select" methods of various channel mode selectors will be elided for example Channel.Confirm and Channel.Tx. The library is intentionally designed to be synchronous, where responses for each protocol message are required to be received in an RPC manner. Some methods have a noWait parameter like Channel.QueueDeclare, and some methods are asynchronous like Channel.Publish. The error values should still be checked for these methods as they will indicate IO failures like when the underlying connection closes. Clients of this library may be interested in receiving some of the protocol messages other than Deliveries like basic.ack methods while a channel is in confirm mode. The Notify* methods with Connection and Channel receivers model the pattern of asynchronous events like closes due to exceptions, or messages that are sent out of band from an RPC call like basic.ack or basic.flow. Any asynchronous events, including Deliveries and Publishings must always have a receiver until the corresponding chans are closed. Without asynchronous receivers, the synchronous methods will block. It's important as a client to an AMQP topology to ensure the state of the broker matches your expectations. For both publish and consume use cases, make sure you declare the queues, exchanges and bindings you expect to exist prior to calling Channel.PublishWithContext or Channel.Consume. When Dial encounters an amqps:// scheme, it will use the zero value of a tls.Config. This will only perform server certificate and host verification. Use DialTLS when you wish to provide a client certificate (recommended), include a private certificate authority's certificate in the cert chain for server validity, or run insecure by not verifying the server certificate. DialTLS will use the provided tls.Config when it encounters an amqps:// scheme and will dial a plain connection when it encounters an amqp:// scheme. SSL/TLS in RabbitMQ is documented here: http://www.rabbitmq.com/ssl.html In order to be notified when a connection or channel gets closed, both structures offer the possibility to register channels using Channel.NotifyClose and Connection.NotifyClose functions: No errors will be sent in case of a graceful connection close. In case of a non-graceful closure due to e.g. network issue, or forced connection closure from the Management UI, the error will be notified synchronously by the library. The library sends to notification channels just once. After sending a notification to all channels, the library closes all registered notification channels. After receiving a notification, the application should create and register a new channel. To avoid deadlocks in the library, it is necessary to consume from the channels. This could be done inside a different goroutine with a select listening on the two channels inside a for loop like: It is strongly recommended to use buffered channels to avoid deadlocks inside the library. Using Channel.NotifyPublish allows the caller of the library to be notified, through a go channel, when a message has been received and confirmed by the broker. It's advisable to wait for all Confirmations to arrive before calling Channel.Close or Connection.Close. It is also necessary to consume from this channel until it gets closed. The library sends synchronously to the registered channel. It is advisable to use a buffered channel, with capacity set to the maximum acceptable number of unconfirmed messages. It is important to consume from the confirmation channel at all times, in order to avoid deadlocks in the library. This exports a Client object that wraps this library. It automatically reconnects when the connection fails, and blocks all pushes until the connection succeeds. It also confirms every outgoing message, so none are lost. It doesn't automatically ack each message, but leaves that to the parent process, since it is usage-dependent. Try running this in one terminal, and rabbitmq-server in another. Stop & restart RabbitMQ to see how the queue reacts.

v1.10.0 • 7 months ago

gopkg.in/inconshreveable/go-update.v0

go-update allows a program to update itself by replacing its executable file with a new version. It provides the flexibility to implement different updating user experiences like auto-updating, or manual user-initiated updates. It also boasts advanced features like binary patching and code signing verification. Updating your program to a new version is as easy as: You may also choose to update from other data sources such as a file or an io.Reader: Binary diff updates are supported and easy to use: You should also verify the checksum of new updates as well as verify the digital signature of an update. Note that even when you choose to apply a patch, the checksum is verified against the complete update after that patch has been applied. Updating arbitrary files is also supported. You may update files which are not the currently running program: Truly secure updates use code signing to verify that the update was issued by a trusted party. To do this, you'll need to generate a public/private key pair. You can do this with openssl, or the equinox.io client (https://equinox.io/client) can easily generate one for you: Once you have your key pair, you can instruct your program to validate its updates with the public key: Once you've configured your program this way, it will disallow all updates unless they are properly signed. You must now pass in the signature to verify with: To perform an update, the process must be able to read its executable file and to write to the directory that contains its executable file. It can be useful to check whether the process has the necessary permissions to perform an update before trying to apply one. Use the CanUpdate call to provide a useful message to the user if the update can't proceed without elevated permissions: Although exceedingly unlikely, the update operation itself is not atomic and can fail in such a way that a user's computer is left in an inconsistent state. If that happens, go-update attempts to recover to leave the system in a good state. If the recovery step fails (even more unlikely), a second error, referred to as "errRecover" will be non-nil so that you may inform your users of the bad news. You should handle this case as shown here: Sub-package check contains the client functionality for a simple protocol for negotiating whether a new update is available, where it is, and the metadata needed for verifying it. Sub-package download contains functionality for downloading from an HTTP endpoint while outputting a progress meter and supports resuming partial downloads.

v0.0.0-20150814200126-d8b0b1d421aa • 9 years ago

go.dedis.ch/kyber/v3

Package kyber provides a toolbox of advanced cryptographic primitives, for applications that need more than straightforward signing and encryption. This top level package defines the interfaces to cryptographic primitives designed to be independent of specific cryptographic algorithms, to facilitate upgrading applications to new cryptographic algorithms or switching to alternative algorithms for experimentation purposes. This toolkits public-key crypto API includes a kyber.Group interface supporting a broad class of group-based public-key primitives including DSA-style integer residue groups and elliptic curve groups. Users of this API can write higher-level crypto algorithms such as zero-knowledge proofs without knowing or caring exactly what kind of group, let alone which precise security parameters or elliptic curves, are being used. The kyber.Group interface supports the standard algebraic operations on group elements and scalars that nontrivial public-key algorithms tend to rely on. The interface uses additive group terminology typical for elliptic curves, such that point addition is homomorphically equivalent to adding their (potentially secret) scalar multipliers. But the API and its operations apply equally well to DSA-style integer groups. As a trivial example, generating a public/private keypair is as simple as: The first statement picks a private key (Scalar) from a the suites's source of cryptographic random or pseudo-random bits, while the second performs elliptic curve scalar multiplication of the curve's standard base point (indicated by the 'nil' argument to Mul) by the scalar private key 'a'. Similarly, computing a Diffie-Hellman shared secret using Alice's private key 'a' and Bob's public key 'B' can be done via: Note that we use 'Mul' rather than 'Exp' here because the library uses the additive-group terminology common for elliptic curve crypto, rather than the multiplicative-group terminology of traditional integer groups - but the two are semantically equivalent and the interface itself works for both elliptic curve and integer groups. Various sub-packages provide several specific implementations of these cryptographic interfaces. In particular, the 'group/mod' sub-package provides implementations of modular integer groups underlying conventional DSA-style algorithms. The `group/nist` package provides NIST-standardized elliptic curves built on the Go crypto library. The 'group/edwards25519' sub-package provides the kyber.Group interface using the popular Ed25519 curve. Other sub-packages build more interesting high-level cryptographic tools atop these primitive interfaces, including: - share: Polynomial commitment and verifiable Shamir secret splitting for implementing verifiable 't-of-n' threshold cryptographic schemes. This can be used to encrypt a message so that any 2 out of 3 receivers must work together to decrypt it, for example. - proof: An implementation of the general Camenisch/Stadler framework for discrete logarithm knowledge proofs. This system supports both interactive and non-interactive proofs of a wide variety of statements such as, "I know the secret x associated with public key X or I know the secret y associated with public key Y", without revealing anything about either secret or even which branch of the "or" clause is true. - sign: The sign directory contains different signature schemes. - sign/anon provides anonymous and pseudonymous public-key encryption and signing, where the sender of a signed message or the receiver of an encrypted message is defined as an explicit anonymity set containing several public keys rather than just one. For example, a member of an organization's board of trustees might prove to be a member of the board without revealing which member she is. - sign/cosi provides collective signature algorithm, where a bunch of signers create a unique, compact and efficiently verifiable signature using the Schnorr signature as a basis. - sign/eddsa provides a kyber-native implementation of the EdDSA signature scheme. - sign/schnorr provides a basic vanilla Schnorr signature scheme implementation. - shuffle: Verifiable cryptographic shuffles of ElGamal ciphertexts, which can be used to implement (for example) voting or auction schemes that keep the sources of individual votes or bids private without anyone having to trust more than one of the shuffler(s) to shuffle votes/bids honestly. As should be obvious, this library is intended to be used by developers who are at least moderately knowledgeable about cryptography. If you want a crypto library that makes it easy to implement "basic crypto" functionality correctly - i.e., plain public-key encryption and signing - then [NaCl secretbox](https://godoc.org/golang.org/x/crypto/nacl/secretbox) may be a better choice. This toolkit's purpose is to make it possible - and preferably easy - to do slightly more interesting things that most current crypto libraries don't support effectively. The one existing crypto library that this toolkit is probably most comparable to is the Charm rapid prototyping library for Python (https://charm-crypto.com/category/charm). This library incorporates and/or builds on existing code from a variety of sources, as documented in the relevant sub-packages. This library is offered as-is, and without a guarantee. It will need an independent security review before it should be considered ready for use in security-critical applications. If you integrate Kyber into your application it is YOUR RESPONSIBILITY to arrange for that audit. If you notice a possible security problem, please report it to dedis-security@epfl.ch.

v3.1.0 • 2 years ago

github.com/cznic/ql

Package ql implements a pure Go embedded SQL database engine. QL is a member of the SQL family of languages. It is less complex and less powerful than SQL (whichever specification SQL is considered to be). 2018-08-02: Release v1.2.0 adds initial support for Go modules. 2017-01-10: Release v1.1.0 fixes some bugs and adds a configurable WAL headroom. 2016-07-29: Release v1.0.6 enables alternatively using = instead of == for equality operation. 2016-07-11: Release v1.0.5 undoes vendoring of lldb. QL now uses stable lldb (github.com/cznic/lldb). 2016-07-06: Release v1.0.4 fixes a panic when closing the WAL file. 2016-04-03: Release v1.0.3 fixes a data race. 2016-03-23: Release v1.0.2 vendors github.com/cznic/exp/lldb and github.com/camlistore/go4/lock. 2016-03-17: Release v1.0.1 adjusts for latest goyacc. Parser error messages are improved and changed, but their exact form is not considered a API change. 2016-03-05: The current version has been tagged v1.0.0. 2015-06-15: To improve compatibility with other SQL implementations, the count built-in aggregate function now accepts * as its argument. 2015-05-29: The execution planner was rewritten from scratch. It should use indices in all places where they were used before plus in some additional situations. It is possible to investigate the plan using the newly added EXPLAIN statement. The QL tool is handy for such analysis. If the planner would have used an index, but no such exists, the plan includes hints in form of copy/paste ready CREATE INDEX statements. The planner is still quite simple and a lot of work on it is yet ahead. You can help this process by filling an issue with a schema and query which fails to use an index or indices when it should, in your opinion. Bonus points for including output of `ql 'explain <query>'`. 2015-05-09: The grammar of the CREATE INDEX statement now accepts an expression list instead of a single expression, which was further limited to just a column name or the built-in id(). As a side effect, composite indices are now functional. However, the values in the expression-list style index are not yet used by other statements or the statement/query planner. The composite index is useful while having UNIQUE clause to check for semantically duplicate rows before they get added to the table or when such a row is mutated using the UPDATE statement and the expression-list style index tuple of the row is thus recomputed. 2015-05-02: The Schema field of table __Table now correctly reflects any column constraints and/or defaults. Also, the (*DB).Info method now has that information provided in new ColumInfo fields NotNull, Constraint and Default. 2015-04-20: Added support for {LEFT,RIGHT,FULL} [OUTER] JOIN. 2015-04-18: Column definitions can now have constraints and defaults. Details are discussed in the "Constraints and defaults" chapter below the CREATE TABLE statement documentation. 2015-03-06: New built-in functions formatFloat and formatInt. Thanks urandom! (https://github.com/urandom) 2015-02-16: IN predicate now accepts a SELECT statement. See the updated "Predicates" section. 2015-01-17: Logical operators || and && have now alternative spellings: OR and AND (case insensitive). AND was a keyword before, but OR is a new one. This can possibly break existing queries. For the record, it's a good idea to not use any name appearing in, for example, [7] in your queries as the list of QL's keywords may expand for gaining better compatibility with existing SQL "standards". 2015-01-12: ACID guarantees were tightened at the cost of performance in some cases. The write collecting window mechanism, a formerly used implementation detail, was removed. Inserting rows one by one in a transaction is now slow. I mean very slow. Try to avoid inserting single rows in a transaction. Instead, whenever possible, perform batch updates of tens to, say thousands of rows in a single transaction. See also: http://www.sqlite.org/faq.html#q19, the discussed synchronization principles involved are the same as for QL, modulo minor details. Note: A side effect is that closing a DB before exiting an application, both for the Go API and through database/sql driver, is no more required, strictly speaking. Beware that exiting an application while there is an open (uncommitted) transaction in progress means losing the transaction data. However, the DB will not become corrupted because of not closing it. Nor that was the case before, but formerly failing to close a DB could have resulted in losing the data of the last transaction. 2014-09-21: id() now optionally accepts a single argument - a table name. 2014-09-01: Added the DB.Flush() method and the LIKE pattern matching predicate. 2014-08-08: The built in functions max and min now accept also time values. Thanks opennota! (https://github.com/opennota) 2014-06-05: RecordSet interface extended by new methods FirstRow and Rows. 2014-06-02: Indices on id() are now used by SELECT statements. 2014-05-07: Introduction of Marshal, Schema, Unmarshal. 2014-04-15: Added optional IF NOT EXISTS clause to CREATE INDEX and optional IF EXISTS clause to DROP INDEX. 2014-04-12: The column Unique in the virtual table __Index was renamed to IsUnique because the old name is a keyword. Unfortunately, this is a breaking change, sorry. 2014-04-11: Introduction of LIMIT, OFFSET. 2014-04-10: Introduction of query rewriting. 2014-04-07: Introduction of indices. QL imports zappy[8], a block-based compressor, which speeds up its performance by using a C version of the compression/decompression algorithms. If a CGO-free (pure Go) version of QL, or an app using QL, is required, please include 'purego' in the -tags option of go {build,get,install}. For example: If zappy was installed before installing QL, it might be necessary to rebuild zappy first (or rebuild QL with all its dependencies using the -a option): The syntax is specified using Extended Backus-Naur Form (EBNF) Lower-case production names are used to identify lexical tokens. Non-terminals are in CamelCase. Lexical tokens are enclosed in double quotes "" or back quotes “. The form a … b represents the set of characters from a through b as alternatives. The horizontal ellipsis … is also used elsewhere in the spec to informally denote various enumerations or code snippets that are not further specified. QL source code is Unicode text encoded in UTF-8. The text is not canonicalized, so a single accented code point is distinct from the same character constructed from combining an accent and a letter; those are treated as two code points. For simplicity, this document will use the unqualified term character to refer to a Unicode code point in the source text. Each code point is distinct; for instance, upper and lower case letters are different characters. Implementation restriction: For compatibility with other tools, the parser may disallow the NUL character (U+0000) in the statement. Implementation restriction: A byte order mark is disallowed anywhere in QL statements. The following terms are used to denote specific character classes The underscore character _ (U+005F) is considered a letter. Lexical elements are comments, tokens, identifiers, keywords, operators and delimiters, integer, floating-point, imaginary, rune and string literals and QL parameters. Line comments start with the character sequence // or -- and stop at the end of the line. A line comment acts like a space. General comments start with the character sequence /* and continue through the character sequence */. A general comment acts like a space. Comments do not nest. Tokens form the vocabulary of QL. There are four classes: identifiers, keywords, operators and delimiters, and literals. White space, formed from spaces (U+0020), horizontal tabs (U+0009), carriage returns (U+000D), and newlines (U+000A), is ignored except as it separates tokens that would otherwise combine into a single token. The formal grammar uses semicolons ";" as separators of QL statements. A single QL statement or the last QL statement in a list of statements can have an optional semicolon terminator. (Actually a separator from the following empty statement.) Identifiers name entities such as tables or record set columns. An identifier is a sequence of one or more letters and digits. The first character in an identifier must be a letter. For example No identifiers are predeclared, however note that no keyword can be used as an identifier. Identifiers starting with two underscores are used for meta data virtual tables names. For forward compatibility, users should generally avoid using any identifiers starting with two underscores. For example The following keywords are reserved and may not be used as identifiers. Keywords are not case sensitive. The following character sequences represent operators, delimiters, and other special tokens Operators consisting of more than one character are referred to by names in the rest of the documentation An integer literal is a sequence of digits representing an integer constant. An optional prefix sets a non-decimal base: 0 for octal, 0x or 0X for hexadecimal. In hexadecimal literals, letters a-f and A-F represent values 10 through 15. For example A floating-point literal is a decimal representation of a floating-point constant. It has an integer part, a decimal point, a fractional part, and an exponent part. The integer and fractional part comprise decimal digits; the exponent part is an e or E followed by an optionally signed decimal exponent. One of the integer part or the fractional part may be elided; one of the decimal point or the exponent may be elided. For example An imaginary literal is a decimal representation of the imaginary part of a complex constant. It consists of a floating-point literal or decimal integer followed by the lower-case letter i. For example A rune literal represents a rune constant, an integer value identifying a Unicode code point. A rune literal is expressed as one or more characters enclosed in single quotes. Within the quotes, any character may appear except single quote and newline. A single quoted character represents the Unicode value of the character itself, while multi-character sequences beginning with a backslash encode values in various formats. The simplest form represents the single character within the quotes; since QL statements are Unicode characters encoded in UTF-8, multiple UTF-8-encoded bytes may represent a single integer value. For instance, the literal 'a' holds a single byte representing a literal a, Unicode U+0061, value 0x61, while 'ä' holds two bytes (0xc3 0xa4) representing a literal a-dieresis, U+00E4, value 0xe4. Several backslash escapes allow arbitrary values to be encoded as ASCII text. There are four ways to represent the integer value as a numeric constant: \x followed by exactly two hexadecimal digits; \u followed by exactly four hexadecimal digits; \U followed by exactly eight hexadecimal digits, and a plain backslash \ followed by exactly three octal digits. In each case the value of the literal is the value represented by the digits in the corresponding base. Although these representations all result in an integer, they have different valid ranges. Octal escapes must represent a value between 0 and 255 inclusive. Hexadecimal escapes satisfy this condition by construction. The escapes \u and \U represent Unicode code points so within them some values are illegal, in particular those above 0x10FFFF and surrogate halves. After a backslash, certain single-character escapes represent special values All other sequences starting with a backslash are illegal inside rune literals. For example A string literal represents a string constant obtained from concatenating a sequence of characters. There are two forms: raw string literals and interpreted string literals. Raw string literals are character sequences between back quotes “. Within the quotes, any character is legal except back quote. The value of a raw string literal is the string composed of the uninterpreted (implicitly UTF-8-encoded) characters between the quotes; in particular, backslashes have no special meaning and the string may contain newlines. Carriage returns inside raw string literals are discarded from the raw string value. Interpreted string literals are character sequences between double quotes "". The text between the quotes, which may not contain newlines, forms the value of the literal, with backslash escapes interpreted as they are in rune literals (except that \' is illegal and \" is legal), with the same restrictions. The three-digit octal (\nnn) and two-digit hexadecimal (\xnn) escapes represent individual bytes of the resulting string; all other escapes represent the (possibly multi-byte) UTF-8 encoding of individual characters. Thus inside a string literal \377 and \xFF represent a single byte of value 0xFF=255, while ÿ, \u00FF, \U000000FF and \xc3\xbf represent the two bytes 0xc3 0xbf of the UTF-8 encoding of character U+00FF. For example These examples all represent the same string If the statement source represents a character as two code points, such as a combining form involving an accent and a letter, the result will be an error if placed in a rune literal (it is not a single code point), and will appear as two code points if placed in a string literal. Literals are assigned their values from the respective text representation at "compile" (parse) time. QL parameters provide the same functionality as literals, but their value is assigned at execution time from an expression list passed to DB.Run or DB.Execute. Using '?' or '$' is completely equivalent. For example Keywords 'false' and 'true' (not case sensitive) represent the two possible constant values of type bool (also not case sensitive). Keyword 'NULL' (not case sensitive) represents an untyped constant which is assignable to any type. NULL is distinct from any other value of any type. A type determines the set of values and operations specific to values of that type. A type is specified by a type name. Named instances of the boolean, numeric, and string types are keywords. The names are not case sensitive. Note: The blob type is exchanged between the back end and the API as []byte. On 32 bit platforms this limits the size which the implementation can handle to 2G. A boolean type represents the set of Boolean truth values denoted by the predeclared constants true and false. The predeclared boolean type is bool. A duration type represents the elapsed time between two instants as an int64 nanosecond count. The representation limits the largest representable duration to approximately 290 years. A numeric type represents sets of integer or floating-point values. The predeclared architecture-independent numeric types are The value of an n-bit integer is n bits wide and represented using two's complement arithmetic. Conversions are required when different numeric types are mixed in an expression or assignment. A string type represents the set of string values. A string value is a (possibly empty) sequence of bytes. The case insensitive keyword for the string type is 'string'. The length of a string (its size in bytes) can be discovered using the built-in function len. A time type represents an instant in time with nanosecond precision. Each time has associated with it a location, consulted when computing the presentation form of the time. The following functions are implicitly declared An expression specifies the computation of a value by applying operators and functions to operands. Operands denote the elementary values in an expression. An operand may be a literal, a (possibly qualified) identifier denoting a constant or a function or a table/record set column, or a parenthesized expression. A qualified identifier is an identifier qualified with a table/record set name prefix. For example Primary expression are the operands for unary and binary expressions. For example A primary expression of the form denotes the element of a string indexed by x. Its type is byte. The value x is called the index. The following rules apply - The index x must be of integer type except bigint or duration; it is in range if 0 <= x < len(s), otherwise it is out of range. - A constant index must be non-negative and representable by a value of type int. - A constant index must be in range if the string a is a literal. - If x is out of range at run time, a run-time error occurs. - s[x] is the byte at index x and the type of s[x] is byte. If s is NULL or x is NULL then the result is NULL. Otherwise s[x] is illegal. For a string, the primary expression constructs a substring. The indices low and high select which elements appear in the result. The result has indices starting at 0 and length equal to high - low. For convenience, any of the indices may be omitted. A missing low index defaults to zero; a missing high index defaults to the length of the sliced operand The indices low and high are in range if 0 <= low <= high <= len(a), otherwise they are out of range. A constant index must be non-negative and representable by a value of type int. If both indices are constant, they must satisfy low <= high. If the indices are out of range at run time, a run-time error occurs. Integer values of type bigint or duration cannot be used as indices. If s is NULL the result is NULL. If low or high is not omitted and is NULL then the result is NULL. Given an identifier f denoting a predeclared function, calls f with arguments a1, a2, … an. Arguments are evaluated before the function is called. The type of the expression is the result type of f. In a function call, the function value and arguments are evaluated in the usual order. After they are evaluated, the parameters of the call are passed by value to the function and the called function begins execution. The return value of the function is passed by value when the function returns. Calling an undefined function causes a compile-time error. Operators combine operands into expressions. Comparisons are discussed elsewhere. For other binary operators, the operand types must be identical unless the operation involves shifts or untyped constants. For operations involving constants only, see the section on constant expressions. Except for shift operations, if one operand is an untyped constant and the other operand is not, the constant is converted to the type of the other operand. The right operand in a shift expression must have unsigned integer type or be an untyped constant that can be converted to unsigned integer type. If the left operand of a non-constant shift expression is an untyped constant, the type of the constant is what it would be if the shift expression were replaced by its left operand alone. Expressions of the form yield a boolean value true if expr2, a regular expression, matches expr1 (see also [6]). Both expression must be of type string. If any one of the expressions is NULL the result is NULL. Predicates are special form expressions having a boolean result type. Expressions of the form are equivalent, including NULL handling, to The types of involved expressions must be comparable as defined in "Comparison operators". Another form of the IN predicate creates the expression list from a result of a SelectStmt. The SelectStmt must select only one column. The produced expression list is resource limited by the memory available to the process. NULL values produced by the SelectStmt are ignored, but if all records of the SelectStmt are NULL the predicate yields NULL. The select statement is evaluated only once. If the type of expr is not the same as the type of the field returned by the SelectStmt then the set operation yields false. The type of the column returned by the SelectStmt must be one of the simple (non blob-like) types: Expressions of the form are equivalent, including NULL handling, to The types of involved expressions must be ordered as defined in "Comparison operators". Expressions of the form yield a boolean value true if expr does not have a specific type (case A) or if expr has a specific type (case B). In other cases the result is a boolean value false. Unary operators have the highest precedence. There are five precedence levels for binary operators. Multiplication operators bind strongest, followed by addition operators, comparison operators, && (logical AND), and finally || (logical OR) Binary operators of the same precedence associate from left to right. For instance, x / y * z is the same as (x / y) * z. Note that the operator precedence is reflected explicitly by the grammar. Arithmetic operators apply to numeric values and yield a result of the same type as the first operand. The four standard arithmetic operators (+, -, *, /) apply to integer, rational, floating-point, and complex types; + also applies to strings; +,- also applies to times. All other arithmetic operators apply to integers only. sum integers, rationals, floats, complex values, strings difference integers, rationals, floats, complex values, times product integers, rationals, floats, complex values / quotient integers, rationals, floats, complex values % remainder integers & bitwise AND integers | bitwise OR integers ^ bitwise XOR integers &^ bit clear (AND NOT) integers << left shift integer << unsigned integer >> right shift integer >> unsigned integer Strings can be concatenated using the + operator String addition creates a new string by concatenating the operands. A value of type duration can be added to or subtracted from a value of type time. Times can subtracted from each other producing a value of type duration. For two integer values x and y, the integer quotient q = x / y and remainder r = x % y satisfy the following relationships with x / y truncated towards zero ("truncated division"). As an exception to this rule, if the dividend x is the most negative value for the int type of x, the quotient q = x / -1 is equal to x (and r = 0). If the divisor is a constant expression, it must not be zero. If the divisor is zero at run time, a run-time error occurs. If the dividend is non-negative and the divisor is a constant power of 2, the division may be replaced by a right shift, and computing the remainder may be replaced by a bitwise AND operation The shift operators shift the left operand by the shift count specified by the right operand. They implement arithmetic shifts if the left operand is a signed integer and logical shifts if it is an unsigned integer. There is no upper limit on the shift count. Shifts behave as if the left operand is shifted n times by 1 for a shift count of n. As a result, x << 1 is the same as x*2 and x >> 1 is the same as x/2 but truncated towards negative infinity. For integer operands, the unary operators +, -, and ^ are defined as follows For floating-point and complex numbers, +x is the same as x, while -x is the negation of x. The result of a floating-point or complex division by zero is not specified beyond the IEEE-754 standard; whether a run-time error occurs is implementation-specific. Whenever any operand of any arithmetic operation, unary or binary, is NULL, as well as in the case of the string concatenating operation, the result is NULL. For unsigned integer values, the operations +, -, *, and << are computed modulo 2n, where n is the bit width of the unsigned integer's type. Loosely speaking, these unsigned integer operations discard high bits upon overflow, and expressions may rely on “wrap around”. For signed integers with a finite bit width, the operations +, -, *, and << may legally overflow and the resulting value exists and is deterministically defined by the signed integer representation, the operation, and its operands. No exception is raised as a result of overflow. An evaluator may not optimize an expression under the assumption that overflow does not occur. For instance, it may not assume that x < x + 1 is always true. Integers of type bigint and rationals do not overflow but their handling is limited by the memory resources available to the program. Comparison operators compare two operands and yield a boolean value. In any comparison, the first operand must be of same type as is the second operand, or vice versa. The equality operators == and != apply to operands that are comparable. The ordering operators <, <=, >, and >= apply to operands that are ordered. These terms and the result of the comparisons are defined as follows - Boolean values are comparable. Two boolean values are equal if they are either both true or both false. - Complex values are comparable. Two complex values u and v are equal if both real(u) == real(v) and imag(u) == imag(v). - Integer values are comparable and ordered, in the usual way. Note that durations are integers. - Floating point values are comparable and ordered, as defined by the IEEE-754 standard. - Rational values are comparable and ordered, in the usual way. - String and Blob values are comparable and ordered, lexically byte-wise. - Time values are comparable and ordered. Whenever any operand of any comparison operation is NULL, the result is NULL. Note that slices are always of type string. Logical operators apply to boolean values and yield a boolean result. The right operand is evaluated conditionally. The truth tables for logical operations with NULL values Conversions are expressions of the form T(x) where T is a type and x is an expression that can be converted to type T. A constant value x can be converted to type T in any of these cases: - x is representable by a value of type T. - x is a floating-point constant, T is a floating-point type, and x is representable by a value of type T after rounding using IEEE 754 round-to-even rules. The constant T(x) is the rounded value. - x is an integer constant and T is a string type. The same rule as for non-constant x applies in this case. Converting a constant yields a typed constant as result. A non-constant value x can be converted to type T in any of these cases: - x has type T. - x's type and T are both integer or floating point types. - x's type and T are both complex types. - x is an integer, except bigint or duration, and T is a string type. Specific rules apply to (non-constant) conversions between numeric types or to and from a string type. These conversions may change the representation of x and incur a run-time cost. All other conversions only change the type but not the representation of x. A conversion of NULL to any type yields NULL. For the conversion of non-constant numeric values, the following rules apply 1. When converting between integer types, if the value is a signed integer, it is sign extended to implicit infinite precision; otherwise it is zero extended. It is then truncated to fit in the result type's size. For example, if v == uint16(0x10F0), then uint32(int8(v)) == 0xFFFFFFF0. The conversion always yields a valid value; there is no indication of overflow. 2. When converting a floating-point number to an integer, the fraction is discarded (truncation towards zero). 3. When converting an integer or floating-point number to a floating-point type, or a complex number to another complex type, the result value is rounded to the precision specified by the destination type. For instance, the value of a variable x of type float32 may be stored using additional precision beyond that of an IEEE-754 32-bit number, but float32(x) represents the result of rounding x's value to 32-bit precision. Similarly, x + 0.1 may use more than 32 bits of precision, but float32(x + 0.1) does not. In all non-constant conversions involving floating-point or complex values, if the result type cannot represent the value the conversion succeeds but the result value is implementation-dependent. 1. Converting a signed or unsigned integer value to a string type yields a string containing the UTF-8 representation of the integer. Values outside the range of valid Unicode code points are converted to "\uFFFD". 2. Converting a blob to a string type yields a string whose successive bytes are the elements of the blob. 3. Converting a value of a string type to a blob yields a blob whose successive elements are the bytes of the string. 4. Converting a value of a bigint type to a string yields a string containing the decimal decimal representation of the integer. 5. Converting a value of a string type to a bigint yields a bigint value containing the integer represented by the string value. A prefix of “0x” or “0X” selects base 16; the “0” prefix selects base 8, and a “0b” or “0B” prefix selects base 2. Otherwise the value is interpreted in base 10. An error occurs if the string value is not in any valid format. 6. Converting a value of a rational type to a string yields a string containing the decimal decimal representation of the rational in the form "a/b" (even if b == 1). 7. Converting a value of a string type to a bigrat yields a bigrat value containing the rational represented by the string value. The string can be given as a fraction "a/b" or as a floating-point number optionally followed by an exponent. An error occurs if the string value is not in any valid format. 8. Converting a value of a duration type to a string returns a string representing the duration in the form "72h3m0.5s". Leading zero units are omitted. As a special case, durations less than one second format using a smaller unit (milli-, micro-, or nanoseconds) to ensure that the leading digit is non-zero. The zero duration formats as 0, with no unit. 9. Converting a string value to a duration yields a duration represented by the string. A duration string is a possibly signed sequence of decimal numbers, each with optional fraction and a unit suffix, such as "300ms", "-1.5h" or "2h45m". Valid time units are "ns", "us" (or "µs"), "ms", "s", "m", "h". 10. Converting a time value to a string returns the time formatted using the format string When evaluating the operands of an expression or of function calls, operations are evaluated in lexical left-to-right order. For example, in the evaluation of the function calls and evaluation of c happen in the order h(), i(), j(), c. Floating-point operations within a single expression are evaluated according to the associativity of the operators. Explicit parentheses affect the evaluation by overriding the default associativity. In the expression x + (y + z) the addition y + z is performed before adding x. Statements control execution. The empty statement does nothing. Alter table statements modify existing tables. With the ADD clause it adds a new column to the table. The column must not exist. With the DROP clause it removes an existing column from a table. The column must exist and it must be not the only (last) column of the table. IOW, there cannot be a table with no columns. For example When adding a column to a table with existing data, the constraint clause of the ColumnDef cannot be used. Adding a constrained column to an empty table is fine. Begin transactions statements introduce a new transaction level. Every transaction level must be eventually balanced by exactly one of COMMIT or ROLLBACK statements. Note that when a transaction is roll-backed because of a statement failure then no explicit balancing of the respective BEGIN TRANSACTION is statement is required nor permitted. Failure to properly balance any opened transaction level may cause dead locks and/or lose of data updated in the uppermost opened but never properly closed transaction level. For example A database cannot be updated (mutated) outside of a transaction. Statements requiring a transaction A database is effectively read only outside of a transaction. Statements not requiring a transaction The commit statement closes the innermost transaction nesting level. If that's the outermost level then the updates to the DB made by the transaction are atomically made persistent. For example Create index statements create new indices. Index is a named projection of ordered values of a table column to the respective records. As a special case the id() of the record can be indexed. Index name must not be the same as any of the existing tables and it also cannot be the same as of any column name of the table the index is on. For example Now certain SELECT statements may use the indices to speed up joins and/or to speed up record set filtering when the WHERE clause is used; or the indices might be used to improve the performance when the ORDER BY clause is present. The UNIQUE modifier requires the indexed values tuple to be index-wise unique or have all values NULL. The optional IF NOT EXISTS clause makes the statement a no operation if the index already exists. A simple index consists of only one expression which must be either a column name or the built-in id(). A more complex and more general index is one that consists of more than one expression or its single expression does not qualify as a simple index. In this case the type of all expressions in the list must be one of the non blob-like types. Note: Blob-like types are blob, bigint, bigrat, time and duration. Create table statements create new tables. A column definition declares the column name and type. Table names and column names are case sensitive. Neither a table or an index of the same name may exist in the DB. For example The optional IF NOT EXISTS clause makes the statement a no operation if the table already exists. The optional constraint clause has two forms. The first one is found in many SQL dialects. This form prevents the data in column DepartmentName to be NULL. The second form allows an arbitrary boolean expression to be used to validate the column. If the value of the expression is true then the validation succeeded. If the value of the expression is false or NULL then the validation fails. If the value of the expression is not of type bool an error occurs. The optional DEFAULT clause is an expression which, if present, is substituted instead of a NULL value when the colum is assigned a value. Note that the constraint and/or default expressions may refer to other columns by name: When a table row is inserted by the INSERT INTO statement or when a table row is updated by the UPDATE statement, the order of operations is as follows: 1. The new values of the affected columns are set and the values of all the row columns become the named values which can be referred to in default expressions evaluated in step 2. 2. If any row column value is NULL and the DEFAULT clause is present in the column's definition, the default expression is evaluated and its value is set as the respective column value. 3. The values, potentially updated, of row columns become the named values which can be referred to in constraint expressions evaluated during step 4. 4. All row columns which definition has the constraint clause present will have that constraint checked. If any constraint violation is detected, the overall operation fails and no changes to the table are made. Delete from statements remove rows from a table, which must exist. For example If the WHERE clause is not present then all rows are removed and the statement is equivalent to the TRUNCATE TABLE statement. Drop index statements remove indices from the DB. The index must exist. For example The optional IF EXISTS clause makes the statement a no operation if the index does not exist. Drop table statements remove tables from the DB. The table must exist. For example The optional IF EXISTS clause makes the statement a no operation if the table does not exist. Insert into statements insert new rows into tables. New rows come from literal data, if using the VALUES clause, or are a result of select statement. In the later case the select statement is fully evaluated before the insertion of any rows is performed, allowing to insert values calculated from the same table rows are to be inserted into. If the ColumnNameList part is omitted then the number of values inserted in the row must be the same as are columns in the table. If the ColumnNameList part is present then the number of values per row must be same as the same number of column names. All other columns of the record are set to NULL. The type of the value assigned to a column must be the same as is the column's type or the value must be NULL. For example If any of the columns of the table were defined using the optional constraints clause or the optional defaults clause then those are processed on a per row basis. The details are discussed in the "Constraints and defaults" chapter below the CREATE TABLE statement documentation. Explain statement produces a recordset consisting of lines of text which describe the execution plan of a statement, if any. For example, the QL tool treats the explain statement specially and outputs the joined lines: The explanation may aid in uderstanding how a statement/query would be executed and if indices are used as expected - or which indices may possibly improve the statement performance. The create index statements above were directly copy/pasted in the terminal from the suggestions provided by the filter recordset pipeline part returned by the explain statement. If the statement has nothing special in its plan, the result is the original statement. To get an explanation of the select statement of the IN predicate, use the EXPLAIN statement with that particular select statement. The rollback statement closes the innermost transaction nesting level discarding any updates to the DB made by it. If that's the outermost level then the effects on the DB are as if the transaction never happened. For example The (temporary) record set from the last statement is returned and can be processed by the client. In this case the rollback is the same as 'DROP TABLE tmp;' but it can be a more complex operation. Select from statements produce recordsets. The optional DISTINCT modifier ensures all rows in the result recordset are unique. Either all of the resulting fields are returned ('*') or only those named in FieldList. RecordSetList is a list of table names or parenthesized select statements, optionally (re)named using the AS clause. The result can be filtered using a WhereClause and orderd by the OrderBy clause. For example If Recordset is a nested, parenthesized SelectStmt then it must be given a name using the AS clause if its field are to be accessible in expressions. A field is an named expression. Identifiers, not used as a type in conversion or a function name in the Call clause, denote names of (other) fields, values of which should be used in the expression. The expression can be named using the AS clause. If the AS clause is not present and the expression consists solely of a field name, then that field name is used as the name of the resulting field. Otherwise the field is unnamed. For example The SELECT statement can optionally enumerate the desired/resulting fields in a list. No two identical field names can appear in the list. When more than one record set is used in the FROM clause record set list, the result record set field names are rewritten to be qualified using the record set names. If a particular record set doesn't have a name, its respective fields became unnamed. The optional JOIN clause, for example is mostly equal to except that the rows from a which, when they appear in the cross join, never made expr to evaluate to true, are combined with a virtual row from b, containing all nulls, and added to the result set. For the RIGHT JOIN variant the discussed rules are used for rows from b not satisfying expr == true and the virtual, all-null row "comes" from a. The FULL JOIN adds the respective rows which would be otherwise provided by the separate executions of the LEFT JOIN and RIGHT JOIN variants. For more thorough OUTER JOIN discussion please see the Wikipedia article at [10]. Resultins rows of a SELECT statement can be optionally ordered by the ORDER BY clause. Collating proceeds by considering the expressions in the expression list left to right until a collating order is determined. Any possibly remaining expressions are not evaluated. All of the expression values must yield an ordered type or NULL. Ordered types are defined in "Comparison operators". Collating of elements having a NULL value is different compared to what the comparison operators yield in expression evaluation (NULL result instead of a boolean value). Below, T denotes a non NULL value of any QL type. NULL collates before any non NULL value (is considered smaller than T). Two NULLs have no collating order (are considered equal). The WHERE clause restricts records considered by some statements, like SELECT FROM, DELETE FROM, or UPDATE. It is an error if the expression evaluates to a non null value of non bool type. Another form of the WHERE clause is an existence predicate of a parenthesized select statement. The EXISTS form evaluates to true if the parenthesized SELECT statement produces a non empty record set. The NOT EXISTS form evaluates to true if the parenthesized SELECT statement produces an empty record set. The parenthesized SELECT statement is evaluated only once (TODO issue #159). The GROUP BY clause is used to project rows having common values into a smaller set of rows. For example Using the GROUP BY without any aggregate functions in the selected fields is in certain cases equal to using the DISTINCT modifier. The last two examples above produce the same resultsets. The optional OFFSET clause allows to ignore first N records. For example The above will produce only rows 11, 12, ... of the record set, if they exist. The value of the expression must a non negative integer, but not bigint or duration. The optional LIMIT clause allows to ignore all but first N records. For example The above will return at most the first 10 records of the record set. The value of the expression must a non negative integer, but not bigint or duration. The LIMIT and OFFSET clauses can be combined. For example Considering table t has, say 10 records, the above will produce only records 4 - 8. After returning record #8, no more result rows/records are computed. 1. The FROM clause is evaluated, producing a Cartesian product of its source record sets (tables or nested SELECT statements). 2. If present, the JOIN cluase is evaluated on the result set of the previous evaluation and the recordset specified by the JOIN clause. (... JOIN Recordset ON ...) 3. If present, the WHERE clause is evaluated on the result set of the previous evaluation. 4. If present, the GROUP BY clause is evaluated on the result set of the previous evaluation(s). 5. The SELECT field expressions are evaluated on the result set of the previous evaluation(s). 6. If present, the DISTINCT modifier is evaluated on the result set of the previous evaluation(s). 7. If present, the ORDER BY clause is evaluated on the result set of the previous evaluation(s). 8. If present, the OFFSET clause is evaluated on the result set of the previous evaluation(s). The offset expression is evaluated once for the first record produced by the previous evaluations. 9. If present, the LIMIT clause is evaluated on the result set of the previous evaluation(s). The limit expression is evaluated once for the first record produced by the previous evaluations. Truncate table statements remove all records from a table. The table must exist. For example Update statements change values of fields in rows of a table. For example Note: The SET clause is optional. If any of the columns of the table were defined using the optional constraints clause or the optional defaults clause then those are processed on a per row basis. The details are discussed in the "Constraints and defaults" chapter below the CREATE TABLE statement documentation. To allow to query for DB meta data, there exist specially named tables, some of them being virtual. Note: Virtual system tables may have fake table-wise unique but meaningless and unstable record IDs. Do not apply the built-in id() to any system table. The table __Table lists all tables in the DB. The schema is The Schema column returns the statement to (re)create table Name. This table is virtual. The table __Colum lists all columns of all tables in the DB. The schema is The Ordinal column defines the 1-based index of the column in the record. This table is virtual. The table __Colum2 lists all columns of all tables in the DB which have the constraint NOT NULL or which have a constraint expression defined or which have a default expression defined. The schema is It's possible to obtain a consolidated recordset for all properties of all DB columns using The Name column is the column name in TableName. The table __Index lists all indices in the DB. The schema is The IsUnique columns reflects if the index was created using the optional UNIQUE clause. This table is virtual. Built-in functions are predeclared. The built-in aggregate function avg returns the average of values of an expression. Avg ignores NULL values, but returns NULL if all values of a column are NULL or if avg is applied to an empty record set. The column values must be of a numeric type. The built-in function contains returns true if substr is within s. If any argument to contains is NULL the result is NULL. The built-in aggregate function count returns how many times an expression has a non NULL values or the number of rows in a record set. Note: count() returns 0 for an empty record set. For example Date returns the time corresponding to in the appropriate zone for that time in the given location. The month, day, hour, min, sec, and nsec values may be outside their usual ranges and will be normalized during the conversion. For example, October 32 converts to November 1. A daylight savings time transition skips or repeats times. For example, in the United States, March 13, 2011 2:15am never occurred, while November 6, 2011 1:15am occurred twice. In such cases, the choice of time zone, and therefore the time, is not well-defined. Date returns a time that is correct in one of the two zones involved in the transition, but it does not guarantee which. A location maps time instants to the zone in use at that time. Typically, the location represents the collection of time offsets in use in a geographical area, such as "CEST" and "CET" for central Europe. "local" represents the system's local time zone. "UTC" represents Universal Coordinated Time (UTC). The month specifies a month of the year (January = 1, ...). If any argument to date is NULL the result is NULL. The built-in function day returns the day of the month specified by t. If the argument to day is NULL the result is NULL. The built-in function formatTime returns a textual representation of the time value formatted according to layout, which defines the format by showing how the reference time, would be displayed if it were the value; it serves as an example of the desired output. The same display rules will then be applied to the time value. If any argument to formatTime is NULL the result is NULL. NOTE: The string value of the time zone, like "CET" or "ACDT", is dependent on the time zone of the machine the function is run on. For example, if the t value is in "CET", but the machine is in "ACDT", instead of "CET" the result is "+0100". This is the same what Go (time.Time).String() returns and in fact formatTime directly calls t.String(). returns on a machine in the CET time zone, but may return on a machine in the ACDT zone. The time value is in both cases the same so its ordering and comparing is correct. Only the display value can differ. The built-in functions formatFloat and formatInt format numbers to strings using go's number format functions in the `strconv` package. For all three functions, only the first argument is mandatory. The default values of the rest are shown in the examples. If the first argument is NULL, the result is NULL. returns returns returns Unlike the `strconv` equivalent, the formatInt function handles all integer types, both signed and unsigned. The built-in function hasPrefix tests whether the string s begins with prefix. If any argument to hasPrefix is NULL the result is NULL. The built-in function hasSuffix tests whether the string s ends with suffix. If any argument to hasSuffix is NULL the result is NULL. The built-in function hour returns the hour within the day specified by t, in the range [0, 23]. If the argument to hour is NULL the result is NULL. The built-in function hours returns the duration as a floating point number of hours. If the argument to hours is NULL the result is NULL. The built-in function id takes zero or one arguments. If no argument is provided, id() returns a table-unique automatically assigned numeric identifier of type int. Ids of deleted records are not reused unless the DB becomes completely empty (has no tables). For example If id() without arguments is called for a row which is not a table record then the result value is NULL. For example If id() has one argument it must be a table name of a table in a cross join. For example The built-in function len takes a string argument and returns the lentgh of the string in bytes. The expression len(s) is constant if s is a string constant. If the argument to len is NULL the result is NULL. The built-in aggregate function max returns the largest value of an expression in a record set. Max ignores NULL values, but returns NULL if all values of a column are NULL or if max is applied to an empty record set. The expression values must be of an ordered type. For example The built-in aggregate function min returns the smallest value of an expression in a record set. Min ignores NULL values, but returns NULL if all values of a column are NULL or if min is applied to an empty record set. For example The column values must be of an ordered type. The built-in function minute returns the minute offset within the hour specified by t, in the range [0, 59]. If the argument to minute is NULL the result is NULL. The built-in function minutes returns the duration as a floating point number of minutes. If the argument to minutes is NULL the result is NULL. The built-in function month returns the month of the year specified by t (January = 1, ...). If the argument to month is NULL the result is NULL. The built-in function nanosecond returns the nanosecond offset within the second specified by t, in the range [0, 999999999]. If the argument to nanosecond is NULL the result is NULL. The built-in function nanoseconds returns the duration as an integer nanosecond count. If the argument to nanoseconds is NULL the result is NULL. The built-in function now returns the current local time. The built-in function parseTime parses a formatted string and returns the time value it represents. The layout defines the format by showing how the reference time, would be interpreted if it were the value; it serves as an example of the input format. The same interpretation will then be made to the input string. Elements omitted from the value are assumed to be zero or, when zero is impossible, one, so parsing "3:04pm" returns the time corresponding to Jan 1, year 0, 15:04:00 UTC (note that because the year is 0, this time is before the zero Time). Years must be in the range 0000..9999. The day of the week is checked for syntax but it is otherwise ignored. In the absence of a time zone indicator, parseTime returns a time in UTC. When parsing a time with a zone offset like -0700, if the offset corresponds to a time zone used by the current location, then parseTime uses that location and zone in the returned time. Otherwise it records the time as being in a fabricated location with time fixed at the given zone offset. When parsing a time with a zone abbreviation like MST, if the zone abbreviation has a defined offset in the current location, then that offset is used. The zone abbreviation "UTC" is recognized as UTC regardless of location. If the zone abbreviation is unknown, Parse records the time as being in a fabricated location with the given zone abbreviation and a zero offset. This choice means that such a time can be parses and reformatted with the same layout losslessly, but the exact instant used in the representation will differ by the actual zone offset. To avoid such problems, prefer time layouts that use a numeric zone offset. If any argument to parseTime is NULL the result is NULL. The built-in function second returns the second offset within the minute specified by t, in the range [0, 59]. If the argument to second is NULL the result is NULL. The built-in function seconds returns the duration as a floating point number of seconds. If the argument to seconds is NULL the result is NULL. The built-in function since returns the time elapsed since t. It is shorthand for now()-t. If the argument to since is NULL the result is NULL. The built-in aggregate function sum returns the sum of values of an expression for all rows of a record set. Sum ignores NULL values, but returns NULL if all values of a column are NULL or if sum is applied to an empty record set. The column values must be of a numeric type. The built-in function timeIn returns t with the location information set to loc. For discussion of the loc argument please see date(). If any argument to timeIn is NULL the result is NULL. The built-in function weekday returns the day of the week specified by t. Sunday == 0, Monday == 1, ... If the argument to weekday is NULL the result is NULL. The built-in function year returns the year in which t occurs. If the argument to year is NULL the result is NULL. The built-in function yearDay returns the day of the year specified by t, in the range [1,365] for non-leap years, and [1,366] in leap years. If the argument to yearDay is NULL the result is NULL. Three functions assemble and disassemble complex numbers. The built-in function complex constructs a complex value from a floating-point real and imaginary part, while real and imag extract the real and imaginary parts of a complex value. The type of the arguments and return value correspond. For complex, the two arguments must be of the same floating-point type and the return type is the complex type with the corresponding floating-point constituents: complex64 for float32, complex128 for float64. The real and imag functions together form the inverse, so for a complex value z, z == complex(real(z), imag(z)). If the operands of these functions are all constants, the return value is a constant. If any argument to any of complex, real, imag functions is NULL the result is NULL. For the numeric types, the following sizes are guaranteed Portions of this specification page are modifications based on work[2] created and shared by Google[3] and used according to terms described in the Creative Commons 3.0 Attribution License[4]. This specification is licensed under the Creative Commons Attribution 3.0 License, and code is licensed under a BSD license[5]. Links from the above documentation This section is not part of the specification. WARNING: The implementation of indices is new and it surely needs more time to become mature. Indices are used currently used only by the WHERE clause. The following expression patterns of 'WHERE expression' are recognized and trigger index use. The relOp is one of the relation operators <, <=, ==, >=, >. For the equality operator both operands must be of comparable types. For all other operators both operands must be of ordered types. The constant expression is a compile time constant expression. Some constant folding is still a TODO. Parameter is a QL parameter ($1 etc.). Consider tables t and u, both with an indexed field f. The WHERE expression doesn't comply with the above simple detected cases. However, such query is now automatically rewritten to which will use both of the indices. The impact of using the indices can be substantial (cf. BenchmarkCrossJoin*) if the resulting rows have low "selectivity", ie. only few rows from both tables are selected by the respective WHERE filtering. Note: Existing QL DBs can be used and indices can be added to them. However, once any indices are present in the DB, the old QL versions cannot work with such DB anymore. Running a benchmark with -v (-test.v) outputs information about the scale used to report records/s and a brief description of the benchmark. For example Running the full suite of benchmarks takes a lot of time. Use the -timeout flag to avoid them being killed after the default time limit (10 minutes).

v1.2.0 • 6 years ago

github.com/benmanns/goworker

Package goworker is a Resque-compatible, Go-based background worker. It allows you to push jobs into a queue using an expressive language like Ruby while harnessing the efficiency and concurrency of Go to minimize job latency and cost. goworker workers can run alongside Ruby Resque clients so that you can keep all but your most resource-intensive jobs in Ruby. To create a worker, write a function matching the signature and register it using Here is a simple worker that prints its arguments: To create workers that share a database pool or other resources, use a closure to share variables. goworker worker functions receive the queue they are serving and a slice of interfaces. To use them as parameters to other functions, use Go type assertions to convert them into usable types. For testing, it is helpful to use the redis-cli program to insert jobs onto the Redis queue: will insert 100 jobs for the MyClass worker onto the myqueue queue. It is equivalent to: After building your workers, you will have an executable that you can run which will automatically poll a Redis server and call your workers as jobs arrive. There are several flags which control the operation of the goworker client. -queues="comma,delimited,queues" — This is the only required flag. The recommended practice is to separate your Resque workers from your goworkers with different queues. Otherwise, Resque worker classes that have no goworker analog will cause the goworker process to fail the jobs. Because of this, there is no default queue, nor is there a way to select all queues (à la Resque's * queue). Queues are processed in the order they are specififed. If you have multiple queues you can assign them weights. A queue with a weight of 2 will be checked twice as often as a queue with a weight of 1: -queues='high=2,low=1'. -interval=5.0 — Specifies the wait period between polling if no job was in the queue the last time one was requested. -concurrency=25 — Specifies the number of concurrently executing workers. This number can be as low as 1 or rather comfortably as high as 100,000, and should be tuned to your workflow and the availability of outside resources. -connections=2 — Specifies the maximum number of Redis connections that goworker will consume between the poller and all workers. There is not much performance gain over two and a slight penalty when using only one. This is configurable in case you need to keep connection counts low for cloud Redis providers who limit plans on maxclients. -uri=redis://localhost:6379/ — Specifies the URI of the Redis database from which goworker polls for jobs. Accepts URIs of the format redis://user:pass@host:port/db or unix:///path/to/redis.sock. The flag may also be set by the environment variable $($REDIS_PROVIDER) or $REDIS_URL. E.g. set $REDIS_PROVIDER to REDISTOGO_URL on Heroku to let the Redis To Go add-on configure the Redis database. -namespace=resque: — Specifies the namespace from which goworker retrieves jobs and stores stats on workers. -exit-on-complete=false — Exits goworker when there are no jobs left in the queue. This is helpful in conjunction with the time command to benchmark different configurations. -use-number=false — Uses json.Number when decoding numbers in the job payloads. This will avoid issues that occur when goworker and the json package decode large numbers as floats, which then get encoded in scientific notation, losing pecision. This will default to true soon. You can also configure your own flags for use within your workers. Be sure to set them before calling goworker.Main(). It is okay to call flags.Parse() before calling goworker.Main() if you need to do additional processing on your flags. To stop goworker, send a QUIT, TERM, or INT signal to the process. This will immediately stop job polling. There can be up to $CONCURRENCY jobs currently running, which will continue to run until they are finished. Like Resque, goworker makes no guarantees about the safety of jobs in the event of process shutdown. Workers must be both idempotent and tolerant to loss of the job in the event of failure. If the process is killed with a KILL or by a system failure, there may be one job that is currently in the poller's buffer that will be lost without any representation in either the queue or the worker variable. If you are running Goworker on a system like Heroku, which sends a TERM to signal a process that it needs to stop, ten seconds later sends a KILL to force the process to stop, your jobs must finish within 10 seconds or they may be lost. Jobs will be recoverable from the Redis database under as a JSON object with keys queue, run_at, and payload, but the process is manual. Additionally, there is no guarantee that the job in Redis under the worker key has not finished, if the process is killed before goworker can flush the update to Redis.

v0.1.3 • 8 years ago

github.com/go-playground/validator/v10

github.com/robfig/cron/v3

github.com/btcsuite/btcd

kernel.org/pub/linux/libs/security/libcap/cap

github.com/jung-kurt/gofpdf

github.com/streadway/amqp

filippo.io/age

github.com/gocql/gocql

github.com/aws/aws-sdk-go-v2/service/route53

github.com/aws/aws-sdk-go-v2/service/kms

github.com/aws/aws-sdk-go-v2/service/cloudwatch

github.com/aws/aws-sdk-go-v2/service/ssm

github.com/aws/aws-sdk-go-v2/service/cloudwatchlogs

github.com/pelletier/go-toml

github.com/aws/aws-sdk-go-v2/service/lambda

github.com/aws/aws-sdk-go-v2/service/eks

bazil.org/fuse

github.com/aws/aws-sdk-go-v2/service/ecs

github.com/aws/aws-sdk-go-v2/service/efs

github.com/Microsoft/go-winio

github.com/lni/dragonboat/v3

github.com/inconshreveable/log15

github.com/awnumar/memguard

gopkg.in/inconshreveable/log15.v2

github.com/aws/aws-sdk-go-v2/service/mq

github.com/aws/aws-sdk-go-v2/service/sfn

github.com/aws/aws-sdk-go-v2/service/appconfig

github.com/rabbitmq/amqp091-go

gopkg.in/inconshreveable/go-update.v0

go.opentelemetry.io/contrib/propagators/autoprop

github.com/takama/daemon

github.com/aws/aws-sdk-go-v2/service/rolesanywhere

go.dedis.ch/kyber/v3

github.com/eapache/channels

github.com/cznic/ql

github.com/gofrs/flock

github.com/llgcode/draw2d

github.com/aws/aws-sdk-go-v2/service/resourcegroups

github.com/aws/aws-sdk-go-v2/service/pricing

gopkg.in/go-playground/pool.v3

github.com/aws/aws-sdk-go-v2/service/ec2instanceconnect

github.com/diskfs/go-diskfs

github.com/opencontainers/go-digest

golang.org/x/crypto/x509roots/fallback

github.com/nxadm/tail

github.com/Masterminds/vcs

github.com/aws/aws-sdk-go-v2/service/transfer

github.com/rqlite/rqlite

github.com/benmanns/goworker

github.com/theckman/go-flock