@conform-to/react
Advanced tools
By default, the browser calls the reportValidity() API on the form element when it is submitted. This checks the validity of all the fields in it and reports if there are errors through the bubbles.
This hook enhances the form validation behaviour in 3 parts:
data-conform-touched, allowing flexible styling across your form without the need to manipulate the class names.import { useForm } from '@conform-to/react';
function LoginForm() {
const formProps = useForm({
/**
* Define when the error should be reported initially.
* Support "onSubmit", "onChange", "onBlur".
*
* Default to `onSubmit`.
*/
initialReport: 'onBlur',
/**
* Enable native validation before hydation.
*
* Default to `false`.
*/
fallbackNative: false,
/**
* Accept form submission regardless of the form validity.
*
* Default to `false`.
*/
noValidate: false,
/**
* A function to be called when the form should be (re)validated.
*/
validate(form, submitter) {
// ...
},
/**
* The submit event handler of the form.
*/
onSubmit(event) {
// ...
},
});
return (
<form {...formProps}>
<input type="email" name="email" required />
<input type="password" name="password" required />
<button type="submit">Login</button>
</form>
);
}
It is a group of properties properties required to hook into form events. They can also be set explicitly as shown below:
function RandomForm() {
const formProps = useForm();
return (
<form
ref={formProps.ref}
onSubmit={formProps.onSubmit}
noValidate={formProps.noValidate}
>
{/* ... */}
</form>
);
}
Yes! It will fallback to native form submission if the submit event handler is omitted or the event is not default prevented.
import { useFrom } from '@conform-to/react';
import { Form } from '@remix-run/react';
function LoginForm() {
const formProps = useForm();
return (
<Form method="post" action="/login" {...formProps}>
{/* ... */}
</Form>
);
}
The validate function is not required if the validation logic can be fully covered by the native constraints, e.g. required / min / pattern etc.
import { useForm, useFieldset } from '@conform-to/react';
function LoginForm() {
const formProps = useForm();
const { email, password } = useFieldset(formProps.ref);
return (
<form {...formProps}>
<label>
<input type="email" name="email" required />
{email.error}
</label>
<label>
<input type="password" name="password" required />
{password.error}
</label>
<button type="submit">Login</button>
</form>
);
}
This hook can be used to monitor the state of each field and help fields configuration. It lets you:
import { useForm, useFieldset } from '@conform-to/react';
/**
* Consider the schema as follow:
*/
type Book = {
name: string;
isbn: string;
};
function BookFieldset() {
const formProps = useForm();
const { name, isbn } = useFieldset<Book>(
/**
* A ref object of the form element or fieldset element
*/
formProps.ref,
{
/**
* The prefix used to generate the name of nested fields.
*/
name: 'book',
/**
* An object representing the initial value of the fieldset.
*/
defaultValue: {
isbn: '0340013818',
},
/**
* An object describing the initial error of each field
*/
initialError: {
isbn: 'Invalid ISBN',
},
/**
* An object describing the constraint of each field
*/
constraint: {
isbn: {
required: true,
pattern: '[0-9]{10,13}',
},
},
/**
* The id of the form. This is required only if you
* are connecting each field to a form remotely.
*/
form: 'remote-form-id',
},
);
/**
* Latest error of the field
* This would be 'Invalid ISBN' initially as specified
* in the initialError config
*/
console.log(isbn.error);
/**
* This would be `book.isbn` instead of `isbn`
* if the `name` option is provided
*/
console.log(isbn.config.name);
/**
* This would be `0340013818` if specified
* on the `initalValue` option
*/
console.log(isbn.config.defaultValue);
/**
* Initial error message
* This would be 'Invalid ISBN' if specified
*/
console.log(isbn.config.initialError);
/**
* This would be `random-form-id`
* because of the `form` option provided
*/
console.log(isbn.config.form);
/**
* Constraint of the field (required, minLength etc)
*
* For example, the constraint of the isbn field would be:
* {
* required: true,
* pattern: '[0-9]{10,13}'
* }
*/
console.log(isbn.config.required);
console.log(isbn.config.pattern);
return <form {...formProps}>{/* ... */}</form>;
}
If you don't have direct access to the form ref, you can also pass a fieldset ref.
import { useFieldset } from '@conform-to/react';
import { useRef } from 'react';
function Fieldset() {
const ref = useRef();
const fieldset = useFieldset(ref);
return <fieldset ref={ref}>{/* ... */}</fieldset>;
}
No. The only thing required is the ref object. All the config is optional. You can always pass them to each fields manually.
import { useForm, useFieldset } from '@conform-to/react';
function SubscriptionForm() {
const formProps = useForm();
const { email } = useFieldset(formProps.ref);
return (
<form {...formProps}>
<input
type="email"
name={email.config.name}
defaultValue="support@conform.dev"
required
/>
</form>
);
}
Unlike most of the form validation library out there, conform use the DOM as its context provider. As the dom maintains a link between each input / button / fieldset with the form through the form property of these elements. The ref object allows us restricting the scope to elements associated to the same form only.
function ExampleForm() {
const formRef = useRef();
const inputRef = useRef();
useEffect(() => {
// Both statements will log `true`
console.log(formRef.current === inputRef.current.form);
console.log(formRef.current.elements.namedItem('title') === inputRef.current)
}, []);
return (
<form ref={formRef}>
<input ref={inputRef} name="title">
</form>
);
}
It returns a list of key and config, with a group of helpers configuring buttons for list manipulation
import { useFieldset, useFieldList } from '@conform-to/react';
import { useRef } from 'react';
/**
* Consider the schema as follow:
*/
type Book = {
name: string;
isbn: string;
};
type Collection = {
books: Book[];
};
function CollectionFieldset() {
const ref = useRef();
const { books } = useFieldset<Collection>(ref);
const [bookList, control] = useFieldList(ref, books.config);
return (
<fieldset ref={ref}>
{bookList.map((book, index) => (
<div key={book.key}>
{/* To setup the fields */}
<input
name={`${book.config.name}.name`}
defaultValue={book.config.defaultValue.name}
/>
<input
name={`${book.config.name}.isbn`}
defaultValue={book.config.defaultValue.isbn}
/>
{/* To setup a delete button */}
<button {...control.remove({ index })}>Delete</button>
</div>
))}
{/* To setup a button that can append a new row with optional default value */}
<button {...control.append({ defaultValue: { name: '', isbn: '' } })}>
add
</button>
</fieldset>
);
}
This hook can also be used in combination with useFieldset to distribute the config:
import { useForm, useFieldset, useFieldList } from '@conform-to/react';
import { useRef } from 'react';
function CollectionFieldset() {
const ref = useRef();
const { books } = useFieldset<Collection>(ref);
const [bookList, control] = useFieldList(ref, books.config);
return (
<fieldset ref={ref}>
{bookList.map((book, index) => (
<div key={book.key}>
{/* `book.config` is a FieldConfig object similar to `books` */}
<BookFieldset {...book.config} />
{/* To setup a delete button */}
<button {...control.remove({ index })}>Delete</button>
</div>
))}
{/* To setup a button that can append a new row */}
<button {...control.append()}>add</button>
</fieldset>
);
}
/**
* This is basically the BookFieldset component from
* the `useFieldset` example, but setting all the
* options with the component props instead
*/
function BookFieldset({ name, form, defaultValue, error }) {
const ref = useRef();
const { name, isbn } = useFieldset(ref, {
name,
form,
defaultValue,
error,
});
return <fieldset ref={ref}>{/* ... */}</fieldset>;
}
// To append a new row with optional defaultValue
<button {...controls.append({ defaultValue })}>Append</button>;
// To prepend a new row with optional defaultValue
<button {...controls.prepend({ defaultValue })}>Prepend</button>;
// To remove a row by index
<button {...controls.remove({ index })}>Remove</button>;
// To replace a row with another defaultValue
<button {...controls.replace({ index, defaultValue })}>Replace</button>;
// To reorder a particular row to an another index
<button {...controls.reorder({ from, to })}>Reorder</button>;
It returns the properties required to configure a shadow input for validation. This is particular useful when integrating dropdown and datepicker whichs introduces custom input mode.
import { useFieldset, useControlledInput } from '@conform-to/react';
import { Select, MenuItem } from '@mui/material';
import { useRef } from 'react';
function MuiForm() {
const ref = useRef();
const { category } = useFieldset(schema);
const [inputProps, control] = useControlledInput(category.config);
return (
<fieldset ref={ref}>
{/* Render a shadow input somewhere */}
<input {...inputProps} />
{/* MUI Select is a controlled component */}
<Select
label="Category"
inputRef={control.ref}
value={control.value}
onChange={control.onChange}
onBlur={control.onBlur}
inputProps={{
onInvalid: control.onInvalid
}}
>
<MenuItem value="">Please select</MenuItem>
<MenuItem value="a">Category A</MenuItem>
<MenuItem value="b">Category B</MenuItem>
<MenuItem value="c">Category C</MenuItem>
</TextField>
</fieldset>
)
}
This help you configure a validate function to check the validity of each fields and setup custom messages using the Constraint Validation APIs.
import { useForm, createValidate } from '@conform-to/react';
export default function SignupForm() {
const formProps = useForm({
validate: createValidate((field, formData) => {
switch (field.name) {
case 'email':
if (field.validity.valueMissing) {
field.setCustomValidity('Email is required');
} else if (field.validity.typeMismatch) {
field.setCustomValidity('Please enter a valid email');
} else {
field.setCustomValidity('');
}
break;
case 'password':
if (field.validity.valueMissing) {
field.setCustomValidity('Password is required');
} else if (field.validity.tooShort) {
field.setCustomValidity(
'The password should be at least 10 characters long',
);
} else {
field.setCustomValidity('');
}
break;
case 'confirm-password': {
if (field.validity.valueMissing) {
field.setCustomValidity('Confirm Password is required');
} else if (field.value !== formData.get('password')) {
field.setCustomValidity('The password does not match');
} else {
field.setCustomValidity('');
}
break;
}
}
}),
});
return <form {...formProps}>{/* ... */}</form>;
}
It provides several helpers to configure a native input field quickly:
import { useFieldset, conform } from '@conform-to/react';
import { useRef } from 'react';
function RandomForm() {
const ref = useRef();
const { category } = useFieldset(ref);
return (
<fieldset ref={ref}>
<input {...conform.input(category.config, { type: 'text' })} />
<textarea {...conform.textarea(category.config)} />
<select {...conform.select(category.config)}>{/* ... */}</select>
</fieldset>
);
}
This is equivalent to:
function RandomForm() {
const ref = useRef();
const { category } = useFieldset(ref);
return (
<fieldset ref={ref}>
<input
type="text"
name={category.config.name}
form={category.config.form}
defaultValue={category.config.defaultValue}
requried={category.config.required}
minLength={category.config.minLength}
maxLength={category.config.maxLength}
min={category.config.min}
max={category.config.max}
multiple={category.config.multiple}
pattern={category.config.pattern}
>
<textarea
name={category.config.name}
form={category.config.form}
defaultValue={category.config.defaultValue}
requried={category.config.required}
minLength={category.config.minLength}
maxLength={category.config.maxLength}
/>
<select
name={category.config.name}
form={category.config.form}
defaultValue={category.config.defaultValue}
requried={category.config.required}
multiple={category.config.multiple}
>
{/* ... */}
</select>
</fieldset>
);
}
FAQs
Conform view adapter for react
The npm package @conform-to/react receives a total of 49,008 weekly downloads. As such, @conform-to/react popularity was classified as popular.
We found that @conform-to/react demonstrated a healthy version release cadence and project activity because the last version was released less than a year ago. It has 1 open source maintainer collaborating on the project.
Did you know?
Socket for GitHub automatically highlights issues in each pull request and monitors the health of all your open source dependencies. Discover the contents of your packages and block harmful activity before you install or update your dependencies.
Security News
GitHub removed 27 malicious pull requests attempting to inject harmful code across multiple open source repositories, in another round of low-effort attacks.
Security News
RubyGems.org has added a new "maintainer" role that allows for publishing new versions of gems. This new permission type is aimed at improving security for gem owners and the service overall.
Security News
Node.js will be enforcing stricter semver-major PR policies a month before major releases to enhance stability and ensure reliable release candidates.