node-red-contrib-netatmo-dashboard
Advanced tools
Get JSON payload for NetAtmo dashboard. See http://netatmo.com, https://dev.netatmo.com/doc
Node-RED node to fetch all data (temperature, pressure, humidity, co2, noise, etc) from a NetAtmo device.
Returns a payload which is split up into to parts:
Attention: The reachable status of the complete station seems not to changefor at least a couple of hours. While the reachable status of devices change after approximately 1h, the station itselve will shown as reachable even if this is not the case
An Example:
{
"compact":
{
"outdoor":
{
"reachable": true,
"temperature":15.1,
"humidity":86,
"temperatureTrend":"down",
"battery_percent":15,
"rf_status":47
},
"rain":
{
"reachable": true,
"rain":0,
"sum_rain_24":0.4,
"sum_rain_1":0.101,
"battery_percent":45,
"rf_status":40
},
modules:
[ {
name: 'wohnzimmer',
data_type: [ 'Temperature', 'CO2', 'Humidity' ],
"battery_percent": 14,
"rf_status": 80,
"reachable": true,
"dashboard_data":
{
"time_utc": 1545901333,
"Temperature": 23.1,
"CO2": 1555,
"Humidity": 50,
"min_temp": 22.7,
"max_temp": 23.6,
"date_min_temp": 1545866372,
"date_max_temp": 1545896155,
"temp_trend": 'stable'
},
"temperature": 23.1,
"Humidity": 50,
"CO2": 1555,
"min_temp": 22.7,
"max_temp": 23.6,
"date_min_temp": 1545866372,
"date_max_temp": 1545896155 },
{
"name": 'Kinderzimmer',
"data_type": [ 'Temperature', 'CO2', 'Humidity' ],
"battery_percent": 45,
"rf_status": 70,
"reachable": true,
"dashboard_data":
{
"time_utc": 1545901314,
"Temperature": 23.2,
"CO2": 1258,
"Humidity": 48,
"min_temp": 23,
"max_temp": 23.6,
"date_min_temp": 1545888753,
"date_max_temp": 1545865225,
"temp_trend": 'stable'
},
"temperature": 23.2,
"Humidity": 48,
"CO2": 1258,
"min_temp": 23,
"max_temp": 23.6,
"date_min_temp": 1545888753,
"date_max_temp": 1545865225
},
{
"name": 'Schlafzimmer',
"data_type": [ 'Temperature', 'CO2', 'Humidity'],
battery_percent: 80,
"rf_status": 68,
"reachable": true,
"dashboard_data":
{
"time_utc": 1545901314,
"Temperature": 22.7,
"CO2": 1497,
"Humidity": 56,
"min_temp": 22.5,
"max_temp": 22.8,
"date_min_temp": 1545865225,
"date_max_temp": 1545885422,
"temp_trend": 'stable'
},
"temperature": 22.7,
"Humidity": 56,
"CO2: 1497",
"min_temp": 22.5,
"max_temp": 22.8,
"date_min_temp": 1545865225,
"date_max_temp": 1545885422
},
"temperature":28.9,
"co2":704,
"humidity":43,
"noise":43,
"pressure":1021.3,
"pressureTrend":"down",
"station_name":"Netatmo#Main",
"last_status_store":1536857210,
"reachable": true,
},
"detailed":
[
{
"_id":"70:ee:50:02:be:56",
"cipher_id":"{your_cypher}",
"date_setup":1397226153,
"last_setup":1397226153,
"type":"NAMain",
"last_status_store":1536857210,
"module_name":"Office",
"firmware":132,
"last_upgrade":1440050083,
"wifi_status":26,
"co2_calibrating":false,
"station_name":"Netatmo#Main",
"data_type":["Temperature","CO2","Humidity","Noise","Pressure"],
"place":{"altitude":36,"city":"Berlin","country":"DE","timezone":"Europe/Berlin","location":[{lat},{long}]},
"dashboard_data":
{
"time_utc":1536857196,
"Temperature":28.9,
"CO2":704,
"Humidity":43,
"Noise":43,
"Pressure":1021.3,
"AbsolutePressure":1017,
"min_temp":27.2,
"max_temp":31.9,
"date_min_temp":1536821144,
"date_max_temp":1536813686,
"temp_trend":"up",
"pressure_trend":"down"
},
"modules":
[
{
"_id":"03:00:00:00:db:38",
"type":"NAModule4",
"module_name":"wohnzimmer",
"data_type":["Temperature","CO2","Humidity"],
"last_setup":1397227514,
"dashboard_data":
{
"time_utc":1536856881,
"Temperature":26,
"CO2":680,
"Humidity":44,
"min_temp":25.4,
"max_temp":26.8,
"date_min_temp":1536828835,
"date_max_temp":1536791560,
"temp_trend":"stable"
},
"firmware":44,
"last_message":1536857208,
"last_seen":1536856881,
"rf_status":89,
"battery_vp":5196,
"battery_percent":55
},
{
"_id":"02:00:00:02:cb:2e",
"type":"NAModule1",
"module_name":"Outdoor",
"data_type":["Temperature","Humidity"],
"last_setup":1397226241,
"dashboard_data":
{
"time_utc":1536857170,
"Temperature":15.1,
"Humidity":86,
"min_temp":13.4,
"max_temp":17.6,
"date_min_temp":1536818729,
"date_max_temp":1536846917,
"temp_trend":"down"
},
"firmware":44,
"last_message":1536857208,
"last_seen":1536857170,
"rf_status":47,
"battery_vp":3968,
"battery_percent":15
},
{
"_id":"03:00:00:01:0a:a4",
"type":"NAModule4",
"module_name":"Kinderzimmer",
"data_type":["Temperature","CO2","Humidity"],
"last_setup":1399312524,
"dashboard_data":
{
"time_utc":1536857157,
"Temperature":26.4,
"CO2":721,
"Humidity":42,
"min_temp":25.4,
"max_temp":27.6,
"date_min_temp":1536829474,
"date_max_temp":1536789645,
"temp_trend":"stable"
},
"firmware":44,
"last_message":1536857208,
"last_seen":1536857208,
"rf_status":60,
"battery_vp":5313,
"battery_percent":62
}
]
}
]
}
NetAtmo changed the authentication scheme in October 2022, in order to authenticate with your device you will need to create an application in Netatmo Connect and obtain: client_id, client_secret and refresh_token. To get the refresh_token a OAuth2 client is needed (i.e. Paw for MacOS): use these params
Click on Get token and then on the input box of Refresh token.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
FAQs
Get JSON payload for NetAtmo dashboard. See http://netatmo.com, https://dev.netatmo.com/doc
We found that node-red-contrib-netatmo-dashboard demonstrated a not healthy version release cadence and project activity because the last version was released a year ago. It has 1 open source maintainer collaborating on the project.
Did you know?
Socket for GitHub automatically highlights issues in each pull request and monitors the health of all your open source dependencies. Discover the contents of your packages and block harmful activity before you install or update your dependencies.
Security News
Research
A malicious npm package disguised as a WhatsApp client is exploiting authentication flows with a remote kill switch to exfiltrate data and destroy files.
Security News
PyPI now supports digital attestations, enhancing security and trust by allowing package maintainers to verify the authenticity of Python packages.
Security News
GitHub removed 27 malicious pull requests attempting to inject harmful code across multiple open source repositories, in another round of low-effort attacks.