roboter

roboter

roboter automates your build.

Installation

$ npm install roboter

Additionally, you either need to install roboter-server or roboter-client, depending on whether you want to do development for the server- or the client-side.

$ npm install roboter-server
$ npm install roboter-client

To use roboter it is recommended to install roboter-cli globally. This way you can easily run roboter by simply typing bot. To install roboter-cli, run the following command.

$ npm install -g roboter-cli

Quick start

First you need to create a roboter.js file in your application's directory. Inside that file you need to reference the module, define the environment you are working in, and run start.

'use strict';

const roboter = require('roboter');

roboter.
  workOn('server').
  start();

This already allows you to run some pre-defined tasks, e.g. code-analysis. For that run the bot CLI tool and provide analyze as parameter.

$ bot analyze

By default, the pre-defined tasks use a default configuration. Most probably you want to change it. To do so, use the equipWith function and setup the desired tasks. Please note that the actual configuration is of course task-dependent.

'use strict';

const roboter = require('roboter');

roboter.
  workOn('server').
  equipWith(task => {
    task('universal/analyze', {
      src: [ '**/*.js', '!node_modules/**/*.js' ]
    });
  }).
  start();

If you want to get an overview of all available tasks, simply run bot without any parameters.

$ bot

Any environment variables you specify when running bot are also available for the tasks. E.g., if you want to run unit tests with disabled TLS verification, run bot as follows.

$ NODE_TLS_REJECT_UNAUTHORIZED=0 bot test-units

Configuring and using tasks

Before using tasks you need to select an environment, i.e. whether you are working on a client or a server project. For that provide the name of the environment to the workOn function.

The environment you select defines what tasks are available to you. The exception to the rule are the universal tasks that are available independent of the selected environment.

Universal tasks

• analyze
• coverage
• license
• outdated
• release
• shell
• test
• test-integration
• test-units
• update

Client tasks

• build-client
• watch-client

Server tasks

• build-server
• watch-server

Universal tasks

The analyze task

This task runs static code analysis on your source files. You only need to specify which files to analyse. For that use the src parameter.

task('universal/analyze', {
  src: [ '**/*.js', '!node_modules/**/*.js' ]
});

By default, the analyze task uses a built-in rule set, but you may override it by specifying the path to an ESLint configuration file or to a shareable ESLint configuration. Either way, use the rules property for overriding the default.

task('universal/analyze', {
  src: [ '**/*.js', '!node_modules/**/*.js' ],
  rules: '.eslintrc'
});

To use a shareable ESLint configuration first install the desired npm module.

$ npm install <eslint-config-myconfig>

Next remove the eslint-config- prefix from the module name and provide what's left as value to the rules property.

task('universal/analyze', {
  src: [ '**/*.js', '!node_modules/**/*.js' ],
  rules: 'myconfig'
});

Whether you use a configuration file or a shareable configuration, you can always make use of ESLint's extends feature which allows to build a hierarchy of ESLint configurations.

As an example, the following shareable configuration uses the 2015/server.js file from the eslint-config-es module as its base and overrides two rules while keeping the others.

module.exports = {
  extends: 'es/2015/server',
  rules: {
    'array-bracket-spacing': [ 2, 'never' ],
    'object-curly-spacing': [ 2, 'always' ]
  }
};

To run this task use the following command.

$ bot analyze

To run this task continuously run the following command.

$ bot watch-analyze

The coverage task

This task calculates the coverage of your unit tests and creates an HTML report in the project's coverage directory.

task('universal/coverage', {
  src: [ './lib/**/*.js', './src/**/*.js' ],
  test: './test/units/**/*Tests.js'
});

By default, roboter assumes that the code to calculate the coverage for is located in the lib or the src directory, and that your unit tests are located in the test/units directory of your project. If you need to, specify other directories using the src and test parameters.

Optionally, you may specify a coverage threshold which fails the build if it is not being reached. The value must be given as percentage, i.e. as a number between 0 and 100:

task('universal/coverage', {
  threshold: 90
});

For more details, please refer to the documentation of istanbul.

By default, code files that are not tested by any test are ignored. To take these files into account as well, set the includeUntested parameter to true:

task('universal/coverage', {
  includeUntested: true
});

To run this task use the following command.

$ bot coverage

The license task

This task checks whether the licenses of your dependencies are compatible to your license. It assumes that the license you use yourself is fine to use for your dependencies, too.

To accept additional licenses, add them to the compatible property of the task configuration.

task('universal/license', {
  compatible: [ 'MIT', 'ISC' ]
});

To run this task use the following command.

$ bot license

The outdated task

This task verifies whether all of your dependencies and development dependencies are up-to-date.

To run this task use the following command.

$ bot outdated

The release task

This task publishes your project. Before publishing it, the task also runs the code analysis and the tests, and checks whether your Git repositoriy is up-to-date.

To run this task use the following command.

$ bot release

By default this creates a patch release. If you want to create a minor or a major release, provide the release type as command-line argument.

$ bot release --type minor
$ bot release --type major

If you want roboter to generate a table of contents for your README.md file, add the following line to that file.

<!-- toc -->

The shell task

This task lets you define shortcuts for arbitrary shell commands. E.g., if you want to automate Docker, you can define a build command that calls out to the Docker command-line interface.

task('universal/shell', {
  build: 'docker build .'
});

To run a custom-defined task run bot and provide the name of the task.

$ bot build

The test task

This task runs your unit and integration tests.

To run this task continuously, you need to configure which files to watch. This usually is a combination of your test files and your actual source code.

task('universal/test', {
  watch: [ '**/*.js', '!node_modules/**/*.js' ]
});

Then run the following command.

$ bot watch-test

The test-integration task

This task runs integration tests using Mocha, where the tests need to be written as asynchronous tests using the tdd style.

suite('api', () => {
  test('runs on port 80.', done => {
    ...
    done();
  });  
});

By default roboter assumes that you store your integration tests in the test/integration directory of your project. However you can specify which files contain your integration tests. For that use the src parameter.

task('universal/test-integration', {
  src: 'test/integration/**/*Tests.js'
});

To run this task use the following command.

$ bot test-integration

To run this task continuously, you need to configure which files to watch. This usually is a combination of your test files and your actual source code.

task('universal/test-integration', {
  src: 'test/integration/**/*Tests.js',
  watch: [ '**/*.js', '!node_modules/**/*.js' ]
});

Then run the following command.

$ bot watch-test-integration

If you need to register any additional pre or post actions that shall be run before or after all tests, provide the files test/integration/pre.js and test/integration/post.js in your application. They need to export an asynchronous function, as in the following example.

'use strict';

module.exports = function (done) {
  // ...
  done(null);
};

In case something goes wrong, hand over the error to done instead of null.

If you need to configure where these files are located, use the pre and post properties.

task('universal/test-integration', {
  src: 'test/integration/**/*Tests.js',
  pre: 'test/start-database.js',
  post: 'test/stop-database.js'
});

Please note that the post task is always run, even in case of failing tests.

The test-units task

This task runs unit tests using Mocha, where the tests need to be written as asynchronous tests using the tdd style.

suite('Basic math', () => {
  test('1 plus 1 is 2.', done => {
    assert.that(1 + 1).is.equalTo(2);
    done();
  });  
});

You need to specify which files contain your tests. For that use the src parameter.

task('universal/test-units', {
  src: 'test/units/**/*Tests.js'
});

To run this task use the following command.

$ bot test-units

To run this task continuously, you need to configure which files to watch. This usually is a combination of your test files and your actual source code.

task('universal/test-units', {
  src: 'test/units/**/*Tests.js',
  watch: [ '**/*.js', '!node_modules/**/*.js' ]
});

Then run the following command.

$ bot watch-test-units

If you need to register any additional pre or post actions that shall be run before or after all tests, provide the files test/units/pre.js and test/units/post.js in your application. They need to export an asynchronous function, as in the following example.

'use strict';

module.exports = function (done) {
  // ...
  done(null);
};

In case something goes wrong, hand over the error to done instead of null.

If you need to configure where these files are located, use the pre and post properties.

task('universal/test-units', {
  src: 'test/units/**/*Tests.js',
  pre: 'test/start-database.js',
  post: 'test/stop-database.js'
});

Please note that the post task is always run, even in case of failing tests.

The update task

This task updates your module's dependencies.

To run this task use the following command.

$ bot update

By default this updates all dependencies. If you only want update a single dependency, provide the module name as command-line argument.

$ bot update --package lodash

If you want to update to a specific version, supply the version.

$ bot update --package lodash@4.13.1

Please note that you may also specify multiple packages. If you want to do so, remember that you have to provide the --package option for each package individually.

Client tasks

The build-client task

This task builds a web application and consists of two sub-tasks that can be configured individually. As this configuration is completely optional roboter will fallback to sensible default values. In order to adjust the settings configure the client/build-app and the client/copy-static task.

task('client/build-app', {
  entryFiles: [
    'src/index.html',
    'src/index.scss',
    'src/index.js'
  ],
  babelize: [
    'src/',
    'node_modules/my-es2015-dependency'
  ],
  buildDir: 'build/',
  publicPath: '/'
});

The client/build-app task bundles your application using the given entryFiles. All the build assets will be transpiled and bundled into the given buildDir. Provide an array of strings or regular expressions via the babelize option to let roboter transpile .js and .jsx files via babel. During runtime your app will use / as the default publicPath when loading bundles. In other words it assumes that you publish your application into the root path of your http server.

If your application is using a nested directory structure, adjust publicPath to /nested-folders/my-app-root. If you prefer loading bundles via relative paths set publicPath to the empty string.

task('client/copy-static', {
  src: 'src/static-content/**/*',
  watch: 'src/static-content/**/*',
  buildDir: 'build/'
});

The client/copy-static task will copy any additional assets into the buildDir.

To run the build-client task use the following command.

$ bot build-client

Building the various parts

By default, roboter expects three entry files for a web application: An index.html, an index.scss, and an index.js file. Please note that within the index.html file you need to reference the built JavaScript artefact. The built CSS is injected automatically:

<!DOCTYPE html>
<html>
  <head>
    <title>...</title>
  </head>
  <body>
    <script type="text/javascript" src="index.js"></script>
  </body>
</html>

Since roboter uses webpack internally, you may specify the loader to be used when calling the require function. Currently, the following loaders are supported:

• css
• file
• postcss
• raw
• sass
• style
• url

Compiling CSS

All CSS code will automatically be parsed by autoprefixer.

Compiling JavaScript

To compile your JavaScript code using Babel, add a .babelrc file to your application and register the plugins and presets you want to use. E.g., to enable compilation for ES2015 and React, add the following lines:

{
  "presets": [ "es2015", "react" ]
}

Please note that you explicitly need to install plugins and presets in order for this to work.

The watch-client task

This task rebuilds a web application continuously. Additionally it starts a live-preview web server that will automatically refresh when files have been changed. By default, hot reloading is enabled for styles and React components. In order to adjust the settings used during watch mode configure the client/watch-app task.

task('client/watch-app', {
  entryFiles: [
    'src/index.html',
    'src/index.scss',
    'src/index.js'
  ],
  buildDir: 'build/',
  babelize: [
    'src/',
    'node_modules/my-es2015-dependency'
  ],
  host: 'localhost',
  port: 8080,
  hotReloading: true
});

To finally run this task use the following command.

$ bot watch-client

Server tasks

The build-server task

This task runs code analysis and unit tests on your code as defined by the analyze and test-units tasks.

To run this task use the following command.

$ bot build-server

The watch-server task

This task runs your unit tests continuously as defined by the test-units tasks.

To run this task use the following command.

$ bot watch-server

Using the default task

No matter whether you are working on the client or on the server, roboter provides a meaningful default task.

• On the client, it is equivalent to the watch-client task.
• On the server, it is equivalent to the build-server task.

To run the default task, simply run bot without any further parameters.

$ bot

Running the tests

To run the tests run the following command.

$ npm run test

Running the build

Unfortunately, this module can not be used to build itself. Hence you have to use npm for that.

To analyze the source code run the following command.

$ npm run analyze

To release a new version run the following command.

$ npm run publish-patch

Alternatively you may also use publish-minor and publish-major, depending on the changes you have made.

License

The MIT License (MIT) Copyright (c) 2015-2016 the native web.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.