roboter streamlines software development by automating tasks and enforcing conventions.
roboter streamlines software development by automating tasks and enforcing conventions.
| Category | Status |
|---|---|
| Version |  |
| Dependencies |  |
| Dev dependencies |  |
| Build |  |
| License |  |
$ npm install roboter
Please note: Never install roboter globally, but always into the local context of your module or application.
To run roboter, execute the following command:
$ npx roboter
Since you will run this command quite often, you may want to setup a shorter alias. To do so, add the following line to your profile file, such as .profile (or the respective file of your platform):
alias bot='npx roboter'
Then you can simply run bot instead of npx roboter. In the following we will assume that you have not setup an alias like this.
roboter provides a variety of tasks. To run them, run roboter and provide the task's name as parameter:
| Name | Description |
|---|---|
analyze | Runs code analysis. |
build | Builds a project using TypeScript. |
deps | Checks for missing, outdated, and unused dependencies. |
help | Shows the help. |
license | Checks dependencies for incompatible licenses. |
qa | Runs code analysis, tests and checks dependencies. |
test | Runs tests. |
If you don't specify a task, the qa task is run as default task.
To get help, run npx roboter --help. To get help for a specific command, run npx roboter <command> --help.
analyze taskThis task runs code analysis on your code using ESLint and npm-package-json-lint. By default it uses the rules defined in the eslint-config-es module and the npm-package-json-lint-config-tnw module.
None
| Exit code | Description |
|---|---|
| 0 | Success |
| 1 | Code analysis failed |
The ESLint code analysis affects all .js, .jsx, .ts and .tsx files, but skips the following directories:
node_modules (nested)build (only top-level)coverage (only top-level)dist (only top-level)To exclude other files or directories, add an .eslintignore file to the root directory of your module or application.
To adjust the ESLint rules to be used, add an .eslintrc.json file to the root directory of your module or application. You may extend the built-in es/node configuration if you only need to change a few rules:
{
"extends": "es/node",
"rules": {
"eqeqeq": 0
}
};
The npm-package-json-lint analysis only affects the package.json file in the root of your project. It is currently not possible to analyze package files in other locations.
To adjust the rules to be used, add an .npmpackagejsonlintrc.json file to the root directory of your module or application. You may extend the npm-package-json-lint-config-tnw/app.json configuration, the npm-package-json-lint-config-tnw/lib.json configuration or any configuration you have made yourself.
In addition to the linting provided by npm-package-json-lint, roboter checks the license provided
by you against the SPDX license list. The default behavior is to reject licenses that are not present on the list, as well as deprecated licenses. If you wish to use a more exotic license that is not listed by SPDX, you may set allowUnsupportedLicenseForThisPackage to true in licenseCheck.json. Deprecated licenses can be enabled in a similar way by setting allowDeprecatedLicenseForThisPackage to true in licenseCheck.json.
build taskIf you want to use TypeScript, add the required tsconfig.json file to the root of your package to enable compilation on build.
Please note that you do not need to install TypeScript itself, as this is provided by roboter out of the box.
Any build options are configured using the aforementioned tsconfig.json file.
None
| Exit code | Description |
|---|---|
| 0 | Success |
| 1 | Build failed |
Please note that missing, outdated, or unused dependencies do not lead to an erroneous exit code. This is by design, since these situations are typically not critical, and you may want to ignore them intentionally.
None
deps taskThis task checks for missing, outdated, and unused dependencies.
None
| Exit code | Description |
|---|---|
| 0 | Success |
Please note that missing, outdated, or unused dependencies do not lead to an erroneous exit code. This is by design, since these situations are typically not critical, and you may want to ignore them intentionally.
Under some circumstances, dependencies are reported as unused, although they are actually being used. This can be caused by dynamic requires, or similar things.
If you experience such a situation, feel free to ignore the warnings.
license taskThis task checks your dependencies for incompatible licenses.
None
| Exit code | Description |
|---|---|
| 0 | Success |
| 1 | Incompatible licenses found |
roboter tries to get your dependencies' licenses from their respective package.json files and, if necessary, from a variety of other places, and tries to check the license compatibility based on a compatibility chart and a license list.
Since license compatibility is a difficult issue and depends very much on the situation, your willingness to take risks and your lawyers interpretation of license law, you need to configure which licenses you deem compatible to your project yourself. To do so, create a licenseCheck.json file in the root of your project with this general layout:
{
"compatibleLicenses": [
"MIT",
"Apache-2.0",
...
]
}
The list of compatible licenses most contain only valid SPDX-expressions.
If one of your dependencies does not specify its license in a valid format and the roboter can not read it, or if you have a license agreement with someone that is not reflected in their package manifest, you can override any package's license in your licenseCheck.json file:
{
"compatibleLicenses": [ ... ],
"knownPackageLicenses": {
"<package-name>": {
"<package-version-semver>": "<license SPDX-expression>"
}
}
}
Please note: Consider the license compatibility check of roboter only to be a suggestion, not as legal advice you can rely on. If you want to be on the safe side, consult a lawyer. the native web does not provide any warranty of any kind.
To disable the license check, omit the licenseCheck.json file in your application root.
qa taskThis task runs the tasks analyze, test, deps, and license sequentially.
None
| Exit code | Description |
|---|---|
| 0 | Success |
| 1 | Code analysis or tests failed |
Please note that missing, outdated, or unused dependencies do not lead to an erroneous exit code. This is by design, since these situations are typically not critical, and you may want to ignore them intentionally.
None
test taskThis task runs unit, integration, and other tests using Mocha.
| Flag | Alias | Description |
|---|---|---|
| --type | -t | The test type, such as unit, integration, … |
| --no-bail | -b | Runs all tests, withouth bailing after failing tests. |
| --watch | -w | Starts the tests in watch mode and reruns tests on file changes. |
| --grep | -g | Filters tests to run according to a given regexp. |
| Exit code | Description |
|---|---|
| 0 | Success |
| 1 | Tests failed |
roboter will look for test types in the test directory of your module or application. You can add a type by simply creating a directory with the desired name, e.g. unit, integration, performance, …
To create tests, add files with the naming schema *Tests.js (or *Tests.ts, if you use TypeScript) to your test type directories. Use Mocha's tdd interface when writing tests. Please also note that all your tests must be asynchronous, i.e. they must either use the done callback or use the async keyword:
// test/integration/databaseTests.js
suite('connect', () => {
test('connects to the database.', async () => {
// ...
});
});
The test types are run in a specific order. If present, roboter will first run unit, integration, e2e, and performance. After those test types, all remaining ones will be run in alphabetical order.
If you want to use functions shared across multiple tests or test types, create a directory test/shared and put your code into it. This directory is handled as a special case and will not be picked up as a test type.
If you need to register any additional pre or post actions (such as starting or stopping Docker containers, …) that shall be run before or after all tests of a given type, create a pre.js and/or a post.js file (or pre.ts and post.ts, if you use TypeScript) in the according test type folder. If you want to run some actions before or after all test types, create a pre.js / post.js / pre.ts / post.ts in the test folder.
Each of these files needs to default export a function that matches one of the ...Script types the roboter exports. The function exported from a pre.ts file must match the type TestPreScript and take the TestPreScriptParameters and vice versa.
import { TestPreScript, TestPreScriptParameters } from 'roboter';
const script: TestPreScript = async function (parameters: TestPreScriptParameters): Promise<void> {
// ...
}
export default script;
Please note: The post.js respectively post.ts file will be run no matter whether the tests themselves were run successfully or not.
Exemplary, for a project with the test types unit, integration and e2e, the scripts are run in this order:
All these scripts receive some parameter as seen in the TypeScript types. These parameters are especially relevant for the watch mode:
When running the tests in watch mode, the scripts are run for every test iteration. I.e. if you change a file and tests need to be re-run, all relevant scripts are executed. Their parameters change with every execution, since they receive a running count of the amount of test iterations since watch mode was started. This way you can write your scripts so that they only execute your setup / teardown logic when you really need them to.
To set environment variables that are available in the tests, you can create a .env file per test type:
SOME_ENV=foo
To adjust test execution, you can provide a .mocharc.json or .mocharc.js file per test type. However, the following options can not be overwritten, and are always set:
--async-only--bail--colors--exit--ui tddSince this is roboter itself, we can't just run npx roboter. But we still want to use roboter to quality test itself. So we run:
$ npm run roboter
You can use all the sub-commands and flags roboter supports.
FAQs
security holding package
The npm package roboter receives a total of 265 weekly downloads. As such, roboter popularity was classified as not popular.
We found that roboter demonstrated a healthy version release cadence and project activity because the last version was released less than a year ago. It has 0 open source maintainers collaborating on the project.
Did you know?
Socket for GitHub automatically highlights issues in each pull request and monitors the health of all your open source dependencies. Discover the contents of your packages and block harmful activity before you install or update your dependencies.
Security News
Research
An advanced npm supply chain attack is leveraging Ethereum smart contracts for decentralized, persistent malware control, evading traditional defenses.
Security News
Research
Attackers are impersonating Sindre Sorhus on npm with a fake 'chalk-node' package containing a malicious backdoor to compromise developers' projects.
Security News
The npm package for the LottieFiles Player web component was hit with a supply chain attack after a software engineer's npmjs credentials were compromised.