CLI Arguments

Package cli provides a convenience methods for constructing command line interfaces using the argo package. Commands may be either singular commands or command trees. A singular command has no subcommand and may take any number of flags and/or arguments. A command tree is a root command that may have an arbitrary depth of branching subcommands which each may take their own flags, with the leaf nodes of the tree also accepting arguments. An example single command: Here the single command `tar` accepts the flags `-x` and -f`, with the `-f` flag taking the argument `foo.tgz`. An example command tree: Here the command tree is constructed of 3 levels, the root of the tree (docker), the intermediary branch (compose) and the leaf command (up). The branch is taking a flag (-f) which is itself taking an argument (my-docker-compose.yml). The leaf command (up) is accepting an optional argument (my-service). Command construction starts with either the `cli.Command` function or the `cli.Tree` function.

Package main is trash cli command entrypoint. trash cli command parsing arguments using spf13/cobra.

goworker is a Resque-compatible, Go-based background worker. It allows you to push jobs into a queue using an expressive language like Ruby while harnessing the efficiency and concurrency of Go to minimize job latency and cost. goworker workers can run alongside Ruby Resque clients so that you can keep all but your most resource-intensive jobs in Ruby. To create a worker, write a function matching the signature and register it using Here is a simple worker that prints its arguments: To create workers that share a database pool or other resources, use a closure to share variables. goworker worker functions receive the queue they are serving and a slice of interfaces. To use them as parameters to other functions, use Go type assertions to convert them into usable types. For testing, it is helpful to use the redis-cli program to insert jobs onto the Redis queue: will insert 100 jobs for the MyClass worker onto the myqueue queue. It is equivalent to: After building your workers, you will have an executable that you can run which will automatically poll a Redis server and call your workers as jobs arrive. There are several flags which control the operation of the goworker client. -queues="comma,delimited,queues" — This is the only required flag. The recommended practice is to separate your Resque workers from your goworkers with different queues. Otherwise, Resque worker classes that have no goworker analog will cause the goworker process to fail the jobs. Because of this, there is no default queue, nor is there a way to select all queues (à la Resque's * queue). Queues are processed in the order they are specififed. If you have multiple queues you can assign them weights. A queue with a weight of 2 will weight of 1: -queues='high=2,low=1'. -interval=5.0 — Specifies the wait period between polling if no job was in the queue the last time one was requested. -concurrency=25 — Specifies the number of concurrently executing workers. This number can be as low as 1 or rather comfortably as high as 100,000, and should be tuned to your workflow and the availability of outside resources. -connections=2 — Specifies the maximum number of Redis connections that goworker will consume between the poller and all workers. There is not much performance gain over two and a slight penalty when using only one. This is configurable in case you need to keep connection counts low for cloud Redis providers who limit plans on maxclients. -uri=redis://localhost:6379/ — Specifies the URI of the Redis database from which goworker polls for jobs. Accepts URIs of the format redis://user:pass@host:port/db or unix:///path/to/redis.sock. The flag may also be set by the environment variable $($REDIS_PROVIDER) or $REDIS_URL. E.g. set $REDIS_PROVIDER to REDISTOGO_URL on Heroku to let the Redis To Go add-on configure the Redis database. -namespace=resque: — Specifies the namespace from which goworker retrieves jobs and stores stats on workers. -exit-on-complete=false — Exits goworker when there are no jobs left in the queue. This is helpful in conjunction with the time command to benchmark different configurations. You can also configure your own flags for use within your workers. Be sure to set them before calling goworker.Main(). It is okay to call flags.Parse() before calling goworker.Main() if you need to do additional processing on your flags. To stop goworker, send a QUIT, TERM, or INT signal to the process. This will immediately stop job polling. There can be up to $CONCURRENCY jobs currently running, which will continue to run until they are finished. Like Resque, goworker makes no guarantees about the safety of jobs in the event of process shutdown. Workers must be both idempotent and tolerant to loss of the job in the event of failure. If the process is killed with a KILL or by a system failure, there may be one job that is currently in the poller's buffer that will be lost without any representation in either the queue or the worker variable. If you are running Goworker on a system like Heroku, which sends a TERM to signal a process that it needs to stop, ten seconds later sends a KILL to force the process to stop, your jobs must finish within 10 seconds or they may be lost. Jobs will be recoverable from the Redis database under as a JSON object with keys queue, run_at, and payload, but the process is manual. Additionally, there is no guarantee that the job in Redis under the worker key has not finished, if the process is killed before goworker can flush the update to Redis.

goworker is a Resque-compatible, Go-based background worker. It allows you to push jobs into a queue using an expressive language like Ruby while harnessing the efficiency and concurrency of Go to minimize job latency and cost. goworker workers can run alongside Ruby Resque clients so that you can keep all but your most resource-intensive jobs in Ruby. To create a worker, write a function matching the signature and register it using Here is a simple worker that prints its arguments: To create workers that share a database pool or other resources, use a closure to share variables. goworker worker functions receive the queue they are serving and a slice of interfaces. To use them as parameters to other functions, use Go type assertions to convert them into usable types. For testing, it is helpful to use the redis-cli program to insert jobs onto the Redis queue: will insert 100 jobs for the MyClass worker onto the myqueue queue. It is equivalent to: After building your workers, you will have an executable that you can run which will automatically poll a Redis server and call your workers as jobs arrive. There are several flags which control the operation of the goworker client. -queues="comma,delimited,queues" — This is the only required flag. The recommended practice is to separate your Resque workers from your goworkers with different queues. Otherwise, Resque worker classes that have no goworker analog will cause the goworker process to fail the jobs. Because of this, there is no default queue, nor is there a way to select all queues (à la Resque's * queue). Queues are processed in the order they are specififed. If you have multiple queues you can assign them weights. A queue with a weight of 2 will weight of 1: -queues='high=2,low=1'. -interval=5.0 — Specifies the wait period between polling if no job was in the queue the last time one was requested. -concurrency=25 — Specifies the number of concurrently executing workers. This number can be as low as 1 or rather comfortably as high as 100,000, and should be tuned to your workflow and the availability of outside resources. -connections=2 — Specifies the maximum number of Redis connections that goworker will consume between the poller and all workers. There is not much performance gain over two and a slight penalty when using only one. This is configurable in case you need to keep connection counts low for cloud Redis providers who limit plans on maxclients. -uri=redis://localhost:6379/ — Specifies the URI of the Redis database from which goworker polls for jobs. Accepts URIs of the format redis://user:pass@host:port/db or unix:///path/to/redis.sock. The flag may also be set by the environment variable $($REDIS_PROVIDER) or $REDIS_URL. E.g. set $REDIS_PROVIDER to REDISTOGO_URL on Heroku to let the Redis To Go add-on configure the Redis database. -namespace=resque: — Specifies the namespace from which goworker retrieves jobs and stores stats on workers. -exit-on-complete=false — Exits goworker when there are no jobs left in the queue. This is helpful in conjunction with the time command to benchmark different configurations. You can also configure your own flags for use within your workers. Be sure to set them before calling goworker.Main(). It is okay to call flags.Parse() before calling goworker.Main() if you need to do additional processing on your flags. To stop goworker, send a QUIT, TERM, or INT signal to the process. This will immediately stop job polling. There can be up to $CONCURRENCY jobs currently running, which will continue to run until they are finished. Like Resque, goworker makes no guarantees about the safety of jobs in the event of process shutdown. Workers must be both idempotent and tolerant to loss of the job in the event of failure. If the process is killed with a KILL or by a system failure, there may be one job that is currently in the poller's buffer that will be lost without any representation in either the queue or the worker variable. If you are running Goworker on a system like Heroku, which sends a TERM to signal a process that it needs to stop, ten seconds later sends a KILL to force the process to stop, your jobs must finish within 10 seconds or they may be lost. Jobs will be recoverable from the Redis database under as a JSON object with keys queue, run_at, and payload, but the process is manual. Additionally, there is no guarantee that the job in Redis under the worker key has not finished, if the process is killed before goworker can flush the update to Redis.

Package cli provides structure for command line applications with sub-commands. This package uses a touch of reflection magic to dispatch to a method with named arguments. Commands help and version are implemented by default. The usage information is pretty printed in an opinionated format. That said, this package still attempts to embrace the standard library flag package. This package assumes that any arguments will remain strings. Any non-string arguments are likely to be passed as optional flags in practice. See the documentation of Rule for details and restrictions.

Package engineapi provides libraries to implement client and server components compatible with the Docker engine. The client package in github.com/docker/engine-api/client implements all necessary requests to implement the official Docker engine cli. Create a new client, then use it to send and receive messages to the Docker engine API: Other programs, like Docker Machine, can set the default Docker engine environment for you. There is a shortcut to use its variables to configure the client: All request arguments are defined as typed structures in the types package. For instance, this is how to get all containers running in the host:

Package cli provides a framework to build command line applications in Go with most of the burden of arguments parsing and validation placed on the framework instead of the user. You start by creating an application by passing a name and a description: To attach the code to execute when the app is launched, assign a function to the Action field: Finally, in your main func, call Run on the app: To add a (global) option, call one of the (String[s]|Int[s]|Bool)Opt methods on the app: * The first argument is a space seperated list of names for the option without the dashes * The second parameter is the default value for the option * The third parameter is the option description, as will be shown in the help messages There is also a second set of methods Bool, String, Int, Strings and Ints, which accepts structs describing the option: The field names are self-describing. There EnvVar field is a space separated list of environment variables names to be used to initialize the option. The result is a pointer to a value that will be populated after parsing the command line arguments. You can access the values in the Action func. * For boolean options: * For string, int options: * For slice options (StringsOpt, IntsOpt): repeat the option to accumulate the values in the resulting slice: To accept arguments, you need to explicitly declare them by calling one of the (String[s]|Int[s]|Bool)Arg methods on the app: * The first argument is the argument name as will be shown in the help messages * The second parameter is the default value for the argument * The third parameter is the argument description, as will be shown in the help messages There is also a second set of methods Bool, String, Int, Strings and Ints, which accepts structs describing the argument: The field names are self-describing. The Value field is where you can set the inital value for the argument. EnvVar accepts a space separated list of environment variables names to be used to initialize the argument. The result is a pointer to a value that will be populated after parsing the command line arguments. You can access the values in the Action func. The -- operator marks the end of options. Everything that follow will be treated as an argument, even if starts with a dash. For example, given the touch command which takes a filename as an argument (and possibly other options): If we try to create a file named -f this way: Would fail, because -f will be parsed as an option not as an argument. The fix is to prefix the filename with the -- operator: mow.cli supports nesting commands and sub commands. Declare a top level command by calling the Command func on the app struct, and a sub command by calling the Command func on the command struct: * The first argument is the command name, as will be shown in the help messages and as will need to be input by the user in the command line to call the command * The second argument is the command description as will be shown in the help messages * The third argument is a CmdInitializer, a function that receives a pointer to a Cmd struct representing the command. In this function, you can add options and arguments by calling the same methods as you would with an app struct (BoolOpt, StringArg, ...). You would also assign a function to the Action field of the Cmd struct for it to be executed when the command is invoked. You can also add sub commands by calling Command on the Cmd struct: This could go on to any depth if need be. As a side-note: it may seem a bit weird the way mow.cli uses a function to initialize a command instead of just returning the command struct. The motivation behind this choice is scoping: as with the standard flag package, adding an option or an argument returns a pointer to a value which will be populated when the app is run. Since you'll want to store these pointers in variables, and to avoid having dozens of them in the same scope (the main func for example or as global variables), mow.cli's API was specifically tailored to take a func parameter (called CmdInitializer) which accepts the command struct. This way, the command specific variables scope is limited to this function. An app or command's call syntax can be customized using spec strings. This can be useful to indicate that an argument is optional for example, or that 2 options are mutually exclusive. You can set a spec string on: * The app: to configure the syntax for global options and arguments * A command: to configure the syntax for that command's options and arguments In both cases, a spec string is assigned to the Spec field: And: The spec syntax is mostly based on the conventions used in POSIX command line apps help messages and man pages: You can use both short and long option names in spec strings: And: Any option you reference in a spec string MUST be explicitly declared, otherwise mow.cli will panic: Arguments are all-uppercased words: This spec string will force the user to pass exactly 2 arguments, SRC and DST Any argument you reference in a spec string MUST be explicitly declared, otherwise mow.cli will panic: The order of the elements in a spec string is respected and enforced when parsing the command line arguments: You can mark iterms as optional in a spec string by enclosing them in squqre brackets :[...] You can use the | operator to indicate a choice between two or more items You can use the ... postfix operator to mark an element as repeatable: You can group items using parenthesis. This is useful in combination with the choice and repetition operators (| and ...): The parenthesis in the example above serve to mark that it is the sequence of a -e flag followed by an argument that is repeatable, and that all that is mutually exclusive to a choice betwwen -x and -y options. This is a shortcut to declare a choice between multiple options: Is equivalent to: I.e. any combination of the listed options in any order, with at least one option. Another shortcut: This is a special syntax (the square brackets are not for marking an optional item, and the uppercased word is not for an argument). This is equivalent to a repeatable choice between all the available options. For example, if an app or a command declares 4 options a, b, c and d, [OPTIONS] is equivalent to The `--` operator can be used in a spec string to automatically treat everything following it as an options. In other words, placing a `--` in the spec string automatically inserts a `--` in the same position in the program call arguments. This lets you write programs like the `time` utility for example: Here's the EBNF grammar for the Specs language: And that's it for the spec language. You can combine these few building blocks in any way you want (while respecting the grammar above) to construct sophisticated validation constraints (don't go too wild though). Behind the scenes, mow.cli parses the spec string and constructs a finite state machine to be used to parse the command line arguments. mow.cli also handles backtracking, and so it can handle tricky cases, or what I like to call "the cp test" Without backtracking, this deceptively simple spec string cannot be parsed correctly. For instance, docopt can't handle this case, whereas mow.cli does. By default, and unless a spec string is set by the user, mow.cli auto-generates one for the app and every command using this logic: * Start with an empty spec string * If at least one option was declared, append "[OPTIONS]" to the spec string * For every declared argument, append it, in the order of declaration, to the spec string For example, given this command delcaration: The auto-generated spec string would be: Which should suffice for simple cases. If not, the spec string has to be set explicitly.

Binary for colouring output. To install the “color“ binary run: The first argument is the color, the rest is the text. If the color is an integer it will be passed to as the __38;5;x__ code. You can also pass a named color. The list is: A header needs a text after. Otherwise the code below renders it a normal paragraph. But here are the examples:

Package cmds helps building both standalone and client-server applications. The basic building blocks are requests, commands, emitters and responses. A command consists of a description of the parameters and a function. The function is passed the request as well as an emitter as arguments. It does operations on the inputs and sends the results to the user by emitting them. There are a number of emitters in this package and subpackages, but the user is free to create their own. A command is a struct containing the commands help text, a description of the arguments and options, the command's processing function and a type to let the caller know what type will be emitted. Optionally one of the functions PostRun and Encoder may be defined that consumes the function's emitted values and generates a visual representation for e.g. the terminal. Encoders work on a value-by-value basis, while PostRun operates on the value stream. An emitter has the Emit method, that takes the command's function's output as an argument and passes it to the user. The command's function does not know what kind of emitter it works with, so the same function may run locally or on a server, using an rpc interface. Emitters can also send errors using the SetError method. The user-facing emitter usually is the cli emitter. Values emitter here will be printed to the terminal using either the Encoders or the PostRun function. A response is a value that the user can read emitted values from. Responses have a method Next() that returns the next emitted value and an error value. If the last element has been received, the returned error value is io.EOF. If the application code has sent an error using SetError, the error ErrRcvdError is returned on next, indicating that the caller should call Error(). Depending on the reponse type, other errors may also occur. Pipes are pairs (emitter, response), such that a value emitted on the emitter can be received in the response value. Most builtin emitters are "pipe" emitters. The most prominent examples are the channel pipe and the http pipe. The channel pipe is backed by a channel. The only error value returned by the response is io.EOF, which happens when the channel is closed. The http pipe is backed by an http connection. The response can also return other errors, e.g. if there are errors on the network. To get a better idea of what's going on, take a look at the examples at https://github.com/ipfs/go-ipfs-cmds/tree/master/examples.

goworker is a Resque-compatible, Go-based background worker. It allows you to push jobs into a queue using an expressive language like Ruby while harnessing the efficiency and concurrency of Go to minimize job latency and cost. goworker workers can run alongside Ruby Resque clients so that you can keep all but your most resource-intensive jobs in Ruby. To create a worker, write a function matching the signature and register it using Here is a simple worker that prints its arguments: To create workers that share a database pool or other resources, use a closure to share variables. goworker worker functions receive the queue they are serving and a slice of interfaces. To use them as parameters to other functions, use Go type assertions to convert them into usable types. For testing, it is helpful to use the redis-cli program to insert jobs onto the Redis queue: will insert 100 jobs for the MyClass worker onto the myqueue queue. It is equivalent to: After building your workers, you will have an executable that you can run which will automatically poll a Redis server and call your workers as jobs arrive. There are several flags which control the operation of the goworker client. -queues="comma,delimited,queues" — This is the only required flag. The recommended practice is to separate your Resque workers from your goworkers with different queues. Otherwise, Resque worker classes that have no goworker analog will cause the goworker process to fail the jobs. Because of this, there is no default queue, nor is there a way to select all queues (à la Resque's * queue). Queues are processed in the order they are specififed. If you have multiple queues you can assign them weights. A queue with a weight of 2 will weight of 1: -queues='high=2,low=1'. -interval=5.0 — Specifies the wait period between polling if no job was in the queue the last time one was requested. -concurrency=25 — Specifies the number of concurrently executing workers. This number can be as low as 1 or rather comfortably as high as 100,000, and should be tuned to your workflow and the availability of outside resources. -connections=2 — Specifies the maximum number of Redis connections that goworker will consume between the poller and all workers. There is not much performance gain over two and a slight penalty when using only one. This is configurable in case you need to keep connection counts low for cloud Redis providers who limit plans on maxclients. -uri=redis://localhost:6379/ — Specifies the URI of the Redis database from which goworker polls for jobs. Accepts URIs of the format redis://user:pass@host:port/db or unix:///path/to/redis.sock. The flag may also be set by the environment variable $($REDIS_PROVIDER) or $REDIS_URL. E.g. set $REDIS_PROVIDER to REDISTOGO_URL on Heroku to let the Redis To Go add-on configure the Redis database. -namespace=resque: — Specifies the namespace from which goworker retrieves jobs and stores stats on workers. -exit-on-complete=false — Exits goworker when there are no jobs left in the queue. This is helpful in conjunction with the time command to benchmark different configurations. You can also configure your own flags for use within your workers. Be sure to set them before calling goworker.Main(). It is okay to call flags.Parse() before calling goworker.Main() if you need to do additional processing on your flags. To stop goworker, send a QUIT, TERM, or INT signal to the process. This will immediately stop job polling. There can be up to $CONCURRENCY jobs currently running, which will continue to run until they are finished. Like Resque, goworker makes no guarantees about the safety of jobs in the event of process shutdown. Workers must be both idempotent and tolerant to loss of the job in the event of failure. If the process is killed with a KILL or by a system failure, there may be one job that is currently in the poller's buffer that will be lost without any representation in either the queue or the worker variable. If you are running Goworker on a system like Heroku, which sends a TERM to signal a process that it needs to stop, ten seconds later sends a KILL to force the process to stop, your jobs must finish within 10 seconds or they may be lost. Jobs will be recoverable from the Redis database under as a JSON object with keys queue, run_at, and payload, but the process is manual. Additionally, there is no guarantee that the job in Redis under the worker key has not finished, if the process is killed before goworker can flush the update to Redis.

Package goworker is a Resque-compatible, Go-based background worker. It allows you to push jobs into a queue using an expressive language like Ruby while harnessing the efficiency and concurrency of Go to minimize job latency and cost. goworker workers can run alongside Ruby Resque clients so that you can keep all but your most resource-intensive jobs in Ruby. To create a worker, write a function matching the signature and register it using Here is a simple worker that prints its arguments: To create workers that share a database pool or other resources, use a closure to share variables. goworker worker functions receive the queue they are serving and a slice of interfaces. To use them as parameters to other functions, use Go type assertions to convert them into usable types. For testing, it is helpful to use the redis-cli program to insert jobs onto the Redis queue: will insert 100 jobs for the MyClass worker onto the myqueue queue. It is equivalent to: After building your workers, you will have an executable that you can run which will automatically poll a Redis server and call your workers as jobs arrive. There are several flags which control the operation of the goworker client. -queues="comma,delimited,queues" — This is the only required flag. The recommended practice is to separate your Resque workers from your goworkers with different queues. Otherwise, Resque worker classes that have no goworker analog will cause the goworker process to fail the jobs. Because of this, there is no default queue, nor is there a way to select all queues (à la Resque's * queue). Queues are processed in the order they are specififed. If you have multiple queues you can assign them weights. A queue with a weight of 2 will be checked twice as often as a queue with a weight of 1: -queues='high=2,low=1'. -interval=5.0 — Specifies the wait period between polling if no job was in the queue the last time one was requested. -concurrency=25 — Specifies the number of concurrently executing workers. This number can be as low as 1 or rather comfortably as high as 100,000, and should be tuned to your workflow and the availability of outside resources. -connections=2 — Specifies the maximum number of Redis connections that goworker will consume between the poller and all workers. There is not much performance gain over two and a slight penalty when using only one. This is configurable in case you need to keep connection counts low for cloud Redis providers who limit plans on maxclients. -uri=redis://localhost:6379/ — Specifies the URI of the Redis database from which goworker polls for jobs. Accepts URIs of the format redis://user:pass@host:port/db or unix:///path/to/redis.sock. The flag may also be set by the environment variable $($REDIS_PROVIDER) or $REDIS_URL. E.g. set $REDIS_PROVIDER to REDISTOGO_URL on Heroku to let the Redis To Go add-on configure the Redis database. -namespace=resque: — Specifies the namespace from which goworker retrieves jobs and stores stats on workers. -exit-on-complete=false — Exits goworker when there are no jobs left in the queue. This is helpful in conjunction with the time command to benchmark different configurations. -use-number=false — Uses json.Number when decoding numbers in the job payloads. This will avoid issues that occur when goworker and the json package decode large numbers as floats, which then get encoded in scientific notation, losing pecision. This will default to true soon. You can also configure your own flags for use within your workers. Be sure to set them before calling goworker.Main(). It is okay to call flags.Parse() before calling goworker.Main() if you need to do additional processing on your flags. To stop goworker, send a QUIT, TERM, or INT signal to the process. This will immediately stop job polling. There can be up to $CONCURRENCY jobs currently running, which will continue to run until they are finished. Like Resque, goworker makes no guarantees about the safety of jobs in the event of process shutdown. Workers must be both idempotent and tolerant to loss of the job in the event of failure. If the process is killed with a KILL or by a system failure, there may be one job that is currently in the poller's buffer that will be lost without any representation in either the queue or the worker variable. If you are running Goworker on a system like Heroku, which sends a TERM to signal a process that it needs to stop, ten seconds later sends a KILL to force the process to stop, your jobs must finish within 10 seconds or they may be lost. Jobs will be recoverable from the Redis database under as a JSON object with keys queue, run_at, and payload, but the process is manual. Additionally, there is no guarantee that the job in Redis under the worker key has not finished, if the process is killed before goworker can flush the update to Redis.

Package openapi embeds and encapsulates the the current OpenAPITools openapi-generator-cli JAR file (see JAR constant for current version). This allows all of its commands and functionality to be used from any Go program easily with a single import (provided Java has been installed on the host system). The Run function passes all arguments directly to the embedded (or cached) jar file itself. Note that the embedded JAR file does not consume any RAM when any function from this package is called since embeds are saved in the .rodata section of the ELF binary, for example.) For those who prefer to use java directly, the JAR file is extracted at init time to the java.CacheDir (default: os.UserCacheDir/gojavacache) and can be used like any other jar file from that location until explicitly removed. The embedded jar file will not be extracted and cached if a file of the same name is already there.

Package goworker is a Resque-compatible, Go-based background worker. It allows you to push jobs into a queue using an expressive language like Ruby while harnessing the efficiency and concurrency of Go to minimize job latency and cost. goworker workers can run alongside Ruby Resque clients so that you can keep all but your most resource-intensive jobs in Ruby. To create a worker, write a function matching the signature and register it using Here is a simple worker that prints its arguments: To create workers that share a database pool or other resources, use a closure to share variables. goworker worker functions receive the queue they are serving and a slice of interfaces. To use them as parameters to other functions, use Go type assertions to convert them into usable types. For testing, it is helpful to use the redis-cli program to insert jobs onto the Redis queue: will insert 100 jobs for the MyClass worker onto the myqueue queue. It is equivalent to: After building your workers, you will have an executable that you can run which will automatically poll a Redis server and call your workers as jobs arrive. There are several flags which control the operation of the goworker client. -queues="comma,delimited,queues" — This is the only required flag. The recommended practice is to separate your Resque workers from your goworkers with different queues. Otherwise, Resque worker classes that have no goworker analog will cause the goworker process to fail the jobs. Because of this, there is no default queue, nor is there a way to select all queues (à la Resque's * queue). Queues are processed in the order they are specififed. If you have multiple queues you can assign them weights. A queue with a weight of 2 will be checked twice as often as a queue with a weight of 1: -queues='high=2,low=1'. -interval=5.0 — Specifies the wait period between polling if no job was in the queue the last time one was requested. -concurrency=25 — Specifies the number of concurrently executing workers. This number can be as low as 1 or rather comfortably as high as 100,000, and should be tuned to your workflow and the availability of outside resources. -connections=2 — Specifies the maximum number of Redis connections that goworker will consume between the poller and all workers. There is not much performance gain over two and a slight penalty when using only one. This is configurable in case you need to keep connection counts low for cloud Redis providers who limit plans on maxclients. -uri=redis://localhost:6379/ — Specifies the URI of the Redis database from which goworker polls for jobs. Accepts URIs of the format redis://user:pass@host:port/db or unix:///path/to/redis.sock. The flag may also be set by the environment variable $($REDIS_PROVIDER) or $REDIS_URL. E.g. set $REDIS_PROVIDER to REDISTOGO_URL on Heroku to let the Redis To Go add-on configure the Redis database. -namespace=resque: — Specifies the namespace from which goworker retrieves jobs and stores stats on workers. -exit-on-complete=false — Exits goworker when there are no jobs left in the queue. This is helpful in conjunction with the time command to benchmark different configurations. -use-number=false — Uses json.Number when decoding numbers in the job payloads. This will avoid issues that occur when goworker and the json package decode large numbers as floats, which then get encoded in scientific notation, losing pecision. This will default to true soon. You can also configure your own flags for use within your workers. Be sure to set them before calling goworker.Main(). It is okay to call flags.Parse() before calling goworker.Main() if you need to do additional processing on your flags. To stop goworker, send a QUIT, TERM, or INT signal to the process. This will immediately stop job polling. There can be up to $CONCURRENCY jobs currently running, which will continue to run until they are finished. Like Resque, goworker makes no guarantees about the safety of jobs in the event of process shutdown. Workers must be both idempotent and tolerant to loss of the job in the event of failure. If the process is killed with a KILL or by a system failure, there may be one job that is currently in the poller's buffer that will be lost without any representation in either the queue or the worker variable. If you are running Goworker on a system like Heroku, which sends a TERM to signal a process that it needs to stop, ten seconds later sends a KILL to force the process to stop, your jobs must finish within 10 seconds or they may be lost. Jobs will be recoverable from the Redis database under as a JSON object with keys queue, run_at, and payload, but the process is manual. Additionally, there is no guarantee that the job in Redis under the worker key has not finished, if the process is killed before goworker can flush the update to Redis.

goworker is a Resque-compatible, Go-based background worker. It allows you to push jobs into a queue using an expressive language like Ruby while harnessing the efficiency and concurrency of Go to minimize job latency and cost. goworker workers can run alongside Ruby Resque clients so that you can keep all but your most resource-intensive jobs in Ruby. To create a worker, write a function matching the signature and register it using Here is a simple worker that prints its arguments: To create workers that share a database pool or other resources, use a closure to share variables. goworker worker functions receive the queue they are serving and a slice of interfaces. To use them as parameters to other functions, use Go type assertions to convert them into usable types. For testing, it is helpful to use the redis-cli program to insert jobs onto the Redis queue: will insert 100 jobs for the MyClass worker onto the myqueue queue. It is equivalent to: After building your workers, you will have an executable that you can run which will automatically poll a Redis server and call your workers as jobs arrive. There are several flags which control the operation of the goworker client. -queues="comma,delimited,queues" — This is the only required flag. The recommended practice is to separate your Resque workers from your goworkers with different queues. Otherwise, Resque worker classes that have no goworker analog will cause the goworker process to fail the jobs. Because of this, there is no default queue, nor is there a way to select all queues (à la Resque's * queue). Queues are processed in the order they are specififed. If you have multiple queues you can assign them weights. A queue with a weight of 2 will weight of 1: -queues='high=2,low=1'. -interval=5.0 — Specifies the wait period between polling if no job was in the queue the last time one was requested. -concurrency=25 — Specifies the number of concurrently executing workers. This number can be as low as 1 or rather comfortably as high as 100,000, and should be tuned to your workflow and the availability of outside resources. -connections=2 — Specifies the maximum number of Redis connections that goworker will consume between the poller and all workers. There is not much performance gain over two and a slight penalty when using only one. This is configurable in case you need to keep connection counts low for cloud Redis providers who limit plans on maxclients. -uri=redis://localhost:6379/ — Specifies the URI of the Redis database from which goworker polls for jobs. Accepts URIs of the format redis://user:pass@host:port/db or unix:///path/to/redis.sock. The flag may also be set by the environment variable $($REDIS_PROVIDER) or $REDIS_URL. E.g. set $REDIS_PROVIDER to REDISTOGO_URL on Heroku to let the Redis To Go add-on configure the Redis database. -namespace=resque: — Specifies the namespace from which goworker retrieves jobs and stores stats on workers. -exit-on-complete=false — Exits goworker when there are no jobs left in the queue. This is helpful in conjunction with the time command to benchmark different configurations. You can also configure your own flags for use within your workers. Be sure to set them before calling goworker.Main(). It is okay to call flags.Parse() before calling goworker.Main() if you need to do additional processing on your flags. To stop goworker, send a QUIT, TERM, or INT signal to the process. This will immediately stop job polling. There can be up to $CONCURRENCY jobs currently running, which will continue to run until they are finished. Like Resque, goworker makes no guarantees about the safety of jobs in the event of process shutdown. Workers must be both idempotent and tolerant to loss of the job in the event of failure. If the process is killed with a KILL or by a system failure, there may be one job that is currently in the poller's buffer that will be lost without any representation in either the queue or the worker variable. If you are running Goworker on a system like Heroku, which sends a TERM to signal a process that it needs to stop, ten seconds later sends a KILL to force the process to stop, your jobs must finish within 10 seconds or they may be lost. Jobs will be recoverable from the Redis database under as a JSON object with keys queue, run_at, and payload, but the process is manual. Additionally, there is no guarantee that the job in Redis under the worker key has not finished, if the process is killed before goworker can flush the update to Redis.

goworker is a Resque-compatible, Go-based background worker. It allows you to push jobs into a queue using an expressive language like Ruby while harnessing the efficiency and concurrency of Go to minimize job latency and cost. goworker workers can run alongside Ruby Resque clients so that you can keep all but your most resource-intensive jobs in Ruby. To create a worker, write a function matching the signature and register it using Here is a simple worker that prints its arguments: To create workers that share a database pool or other resources, use a closure to share variables. goworker worker functions receive the queue they are serving and a slice of interfaces. To use them as parameters to other functions, use Go type assertions to convert them into usable types. For testing, it is helpful to use the redis-cli program to insert jobs onto the Redis queue: will insert 100 jobs for the MyClass worker onto the myqueue queue. It is equivalent to: After building your workers, you will have an executable that you can run which will automatically poll a Redis server and call your workers as jobs arrive. There are several flags which control the operation of the goworker client. -queues="comma,delimited,queues" — This is the only required flag. The recommended practice is to separate your Resque workers from your goworkers with different queues. Otherwise, Resque worker classes that have no goworker analog will cause the goworker process to fail the jobs. Because of this, there is no default queue, nor is there a way to select all queues (à la Resque's * queue). Queues are processed in the order they are specififed. If you have multiple queues you can assign them weights. A queue with a weight of 2 will weight of 1: -queues='high=2,low=1'. -interval=5.0 — Specifies the wait period between polling if no job was in the queue the last time one was requested. -concurrency=25 — Specifies the number of concurrently executing workers. This number can be as low as 1 or rather comfortably as high as 100,000, and should be tuned to your workflow and the availability of outside resources. -connections=2 — Specifies the maximum number of Redis connections that goworker will consume between the poller and all workers. There is not much performance gain over two and a slight penalty when using only one. This is configurable in case you need to keep connection counts low for cloud Redis providers who limit plans on maxclients. -uri=redis://localhost:6379/ — Specifies the URI of the Redis database from which goworker polls for jobs. Accepts URIs of the format redis://user:pass@host:port/db or unix:///path/to/redis.sock. The flag may also be set by the environment variable $($REDIS_PROVIDER) or $REDIS_URL. E.g. set $REDIS_PROVIDER to REDISTOGO_URL on Heroku to let the Redis To Go add-on configure the Redis database. -namespace=resque: — Specifies the namespace from which goworker retrieves jobs and stores stats on workers. -exit-on-complete=false — Exits goworker when there are no jobs left in the queue. This is helpful in conjunction with the time command to benchmark different configurations. You can also configure your own flags for use within your workers. Be sure to set them before calling goworker.Main(). It is okay to call flags.Parse() before calling goworker.Main() if you need to do additional processing on your flags. To stop goworker, send a QUIT, TERM, or INT signal to the process. This will immediately stop job polling. There can be up to $CONCURRENCY jobs currently running, which will continue to run until they are finished. Like Resque, goworker makes no guarantees about the safety of jobs in the event of process shutdown. Workers must be both idempotent and tolerant to loss of the job in the event of failure. If the process is killed with a KILL or by a system failure, there may be one job that is currently in the poller's buffer that will be lost without any representation in either the queue or the worker variable. If you are running Goworker on a system like Heroku, which sends a TERM to signal a process that it needs to stop, ten seconds later sends a KILL to force the process to stop, your jobs must finish within 10 seconds or they may be lost. Jobs will be recoverable from the Redis database under as a JSON object with keys queue, run_at, and payload, but the process is manual. Additionally, there is no guarantee that the job in Redis under the worker key has not finished, if the process is killed before goworker can flush the update to Redis.

Package engineapi provides libraries to implement client and server components compatible with the Docker engine. The client package in github.com/docker/engine-api/client implements all necessary requests to implement the official Docker engine cli. Create a new client, then use it to send and receive messages to the Docker engine API: Other programs, like Docker Machine, can set the default Docker engine environment for you. There is a shortcut to use its variables to configure the client: All request arguments are defined as typed structures in the types package. For instance, this is how to get all containers running in the host:

Package engineapi provides libraries to implement client and server components compatible with the Docker engine. The client package in github.com/docker/engine-api/client implements all necessary requests to implement the official Docker engine cli. Create a new client, then use it to send and receive messages to the Docker engine API: Other programs, like Docker Machine, can set the default Docker engine environment for you. There is a shortcut to use its variables to configure the client: All request arguments are defined as typed structures in the types package. For instance, this is how to get all containers running in the host:

Package goworker is a Resque-compatible, Go-based background worker. It allows you to push jobs into a queue using an expressive language like Ruby while harnessing the efficiency and concurrency of Go to minimize job latency and cost. goworker workers can run alongside Ruby Resque clients so that you can keep all but your most resource-intensive jobs in Ruby. To create a worker, write a function matching the signature and register it using Here is a simple worker that prints its arguments: To create workers that share a database pool or other resources, use a closure to share variables. goworker worker functions receive the queue they are serving and a slice of interfaces. To use them as parameters to other functions, use Go type assertions to convert them into usable types. For testing, it is helpful to use the redis-cli program to insert jobs onto the Redis queue: will insert 100 jobs for the MyClass worker onto the myqueue queue. It is equivalent to: After building your workers, you will have an executable that you can run which will automatically poll a Redis server and call your workers as jobs arrive. There are several flags which control the operation of the goworker client. -queues="comma,delimited,queues" — This is the only required flag. The recommended practice is to separate your Resque workers from your goworkers with different queues. Otherwise, Resque worker classes that have no goworker analog will cause the goworker process to fail the jobs. Because of this, there is no default queue, nor is there a way to select all queues (à la Resque's * queue). Queues are processed in the order they are specififed. If you have multiple queues you can assign them weights. A queue with a weight of 2 will be checked twice as often as a queue with a weight of 1: -queues='high=2,low=1'. -interval=5.0 — Specifies the wait period between polling if no job was in the queue the last time one was requested. -concurrency=25 — Specifies the number of concurrently executing workers. This number can be as low as 1 or rather comfortably as high as 100,000, and should be tuned to your workflow and the availability of outside resources. -connections=2 — Specifies the maximum number of Redis connections that goworker will consume between the poller and all workers. There is not much performance gain over two and a slight penalty when using only one. This is configurable in case you need to keep connection counts low for cloud Redis providers who limit plans on maxclients. -uri=redis://localhost:6379/ — Specifies the URI of the Redis database from which goworker polls for jobs. Accepts URIs of the format redis://user:pass@host:port/db or unix:///path/to/redis.sock. The flag may also be set by the environment variable $($REDIS_PROVIDER) or $REDIS_URL. E.g. set $REDIS_PROVIDER to REDISTOGO_URL on Heroku to let the Redis To Go add-on configure the Redis database. -namespace=resque: — Specifies the namespace from which goworker retrieves jobs and stores stats on workers. -exit-on-complete=false — Exits goworker when there are no jobs left in the queue. This is helpful in conjunction with the time command to benchmark different configurations. -use-number=false — Uses json.Number when decoding numbers in the job payloads. This will avoid issues that occur when goworker and the json package decode large numbers as floats, which then get encoded in scientific notation, losing pecision. This will default to true soon. You can also configure your own flags for use within your workers. Be sure to set them before calling goworker.Main(). It is okay to call flags.Parse() before calling goworker.Main() if you need to do additional processing on your flags. To stop goworker, send a QUIT, TERM, or INT signal to the process. This will immediately stop job polling. There can be up to $CONCURRENCY jobs currently running, which will continue to run until they are finished. Like Resque, goworker makes no guarantees about the safety of jobs in the event of process shutdown. Workers must be both idempotent and tolerant to loss of the job in the event of failure. If the process is killed with a KILL or by a system failure, there may be one job that is currently in the poller's buffer that will be lost without any representation in either the queue or the worker variable. If you are running Goworker on a system like Heroku, which sends a TERM to signal a process that it needs to stop, ten seconds later sends a KILL to force the process to stop, your jobs must finish within 10 seconds or they may be lost. Jobs will be recoverable from the Redis database under as a JSON object with keys queue, run_at, and payload, but the process is manual. Additionally, there is no guarantee that the job in Redis under the worker key has not finished, if the process is killed before goworker can flush the update to Redis.

goworker is a Resque-compatible, Go-based background worker. It allows you to push jobs into a queue using an expressive language like Ruby while harnessing the efficiency and concurrency of Go to minimize job latency and cost. goworker workers can run alongside Ruby Resque clients so that you can keep all but your most resource-intensive jobs in Ruby. To create a worker, write a function matching the signature and register it using Here is a simple worker that prints its arguments: To create workers that share a database pool or other resources, use a closure to share variables. goworker worker functions receive the queue they are serving and a slice of interfaces. To use them as parameters to other functions, use Go type assertions to convert them into usable types. For testing, it is helpful to use the redis-cli program to insert jobs onto the Redis queue: will insert 100 jobs for the MyClass worker onto the myqueue queue. It is equivalent to: After building your workers, you will have an executable that you can run which will automatically poll a Redis server and call your workers as jobs arrive. There are several flags which control the operation of the goworker client. -queues="comma,delimited,queues" — This is the only required flag. The recommended practice is to separate your Resque workers from your goworkers with different queues. Otherwise, Resque worker classes that have no goworker analog will cause the goworker process to fail the jobs. Because of this, there is no default queue, nor is there a way to select all queues (à la Resque's * queue). Queues are processed in the order they are specififed. If you have multiple queues you can assign them weights. A queue with a weight of 2 will weight of 1: -queues='high=2,low=1'. -interval=5.0 — Specifies the wait period between polling if no job was in the queue the last time one was requested. -concurrency=25 — Specifies the number of concurrently executing workers. This number can be as low as 1 or rather comfortably as high as 100,000, and should be tuned to your workflow and the availability of outside resources. -connections=2 — Specifies the maximum number of Redis connections that goworker will consume between the poller and all workers. There is not much performance gain over two and a slight penalty when using only one. This is configurable in case you need to keep connection counts low for cloud Redis providers who limit plans on maxclients. -uri=redis://localhost:6379/ — Specifies the URI of the Redis database from which goworker polls for jobs. Accepts URIs of the format redis://user:pass@host:port/db or unix:///path/to/redis.sock. The flag may also be set by the environment variable $($REDIS_PROVIDER) or $REDIS_URL. E.g. set $REDIS_PROVIDER to REDISTOGO_URL on Heroku to let the Redis To Go add-on configure the Redis database. -namespace=resque: — Specifies the namespace from which goworker retrieves jobs and stores stats on workers. -exit-on-complete=false — Exits goworker when there are no jobs left in the queue. This is helpful in conjunction with the time command to benchmark different configurations. You can also configure your own flags for use within your workers. Be sure to set them before calling goworker.Main(). It is okay to call flags.Parse() before calling goworker.Main() if you need to do additional processing on your flags. To stop goworker, send a QUIT, TERM, or INT signal to the process. This will immediately stop job polling. There can be up to $CONCURRENCY jobs currently running, which will continue to run until they are finished. Like Resque, goworker makes no guarantees about the safety of jobs in the event of process shutdown. Workers must be both idempotent and tolerant to loss of the job in the event of failure. If the process is killed with a KILL or by a system failure, there may be one job that is currently in the poller's buffer that will be lost without any representation in either the queue or the worker variable. If you are running Goworker on a system like Heroku, which sends a TERM to signal a process that it needs to stop, ten seconds later sends a KILL to force the process to stop, your jobs must finish within 10 seconds or they may be lost. Jobs will be recoverable from the Redis database under as a JSON object with keys queue, run_at, and payload, but the process is manual. Additionally, there is no guarantee that the job in Redis under the worker key has not finished, if the process is killed before goworker can flush the update to Redis.

Package cli provides a framework to build command line applications in Go with most of the burden of arguments parsing and validation placed on the framework instead of the user. To create a new application, initialize an app with cli.App. Specify a name and a brief description for the application: To attach code to execute when the app is launched, assign a function to the Action field: To assign a version to the application, use Version method and specify the flags that will be used to invoke the version command: Finally, in the main func, call Run passing in the arguments for parsing: To add one or more command line options (also known as flags), use one of the short-form StringOpt, StringsOpt, IntOpt, IntsOpt, or BoolOpt methods on App (or Cmd if adding flags to a command or subcommand). For example, to add a boolean flag to the cp command that specifies recursive mode, use the following: The first argument is a space separated list of names for the option without the dashes. Generally, both short and long forms are specified, but this is not mandatory. Additional names (aliases) can be provide if desired, but these are not shown in the auto-generated help. The second argument is the default value for the option if it is not supplied by the user. And, the third argument is the description to be shown in help messages. There is also a second set of methods on App called String, Strings, Int, Ints, and Bool, which accept a long-form struct of the type: cli.StringOpt, cli.StringsOpt, cli.IntOpt, cli.IntsOpt, cli.BoolOpt. The struct describes the option and allows the use of additional features not available in the short-form methods described above: Two features, EnvVar and SetByUser, can be defined in the long-form struct method. EnvVar is a space separated list of environment variables used to initialize the option if a value is not provided by the user. When help messages are shown, the value of any environment variables will be displayed. SetByUser is a pointer to a boolean variable that is set to true if the user specified the value on the command line. This can be useful to determine if the value of the option was explicitly set by the user or set via the default value. The result of both short- and long-forms is a pointer to a value, which will be populated after the command line arguments are parsed. You can only access the values stored in the pointers in the Action func, which is invoked after argument parsing has been completed. This precludes using the value of one option as the default value of another. On the command line, the following syntaxes are supported when specifying options. Boolean options: String and int options: Slice options (StringsOpt, IntsOpt) where option is repeated to accumulate values in a slice: To add one or more command line arguments (not prefixed by dashes), use one of the short-form StringArg, StringsArg, IntArg, IntsArg, or BoolArg methods on App (or Cmd if adding arguments to a command or subcommand). For example, to add two string arguments to our cp command, use the following calls: The first argument is the name of the argument as displayed in help messages. Argument names must be specified as all uppercase. The second argument is the default value for the argument if it is not supplied. And the third, argument is the description to be shown in help messages. There is also a second set of methods on App called String, Strings, Int, Ints, and Bool, which accept a long-form struct of the type: cli.StringArg, cli.StringsArg, cli.IntArg, cli.IntsArg, cli.BoolArg. The struct describes the arguments and allows the use of additional features not available in the short-form methods described above: Two features, EnvVar and SetByUser, can be defined in the long-form struct method. EnvVar is a space separated list of environment variables used to initialize the argument if a value is not provided by the user. When help messages are shown, the value of any environment variables will be displayed. SetByUser is a pointer to a boolean variable that is set to true if the user specified the value on the command line. This can be useful to determine if the value of the argument was explicitly set by the user or set via the default value. The result of both short- and long-forms is a pointer to a value which will be populated after the command line arguments are parsed. You can only access the values stored in the pointers in the Action func, which is invoked after argument parsing has been completed. This precludes using the value of one argument as the default value of another. The -- operator marks the end of command line options. Everything that follows will be treated as an argument, even if starts with a dash. For example, the standard POSIX touch command, which takes a filename as an argument (and possibly other options that we'll ignore here), could be defined as: If we try to create a file named "-f" via our touch command: It will fail because the -f will be parsed as an option, not as an argument. The fix is to insert -- after all flags have been specified, so the remaining arguments are parsed as arguments instead of options as follows: This ensures the -f is parsed as an argument instead of a flag named f. This package supports nesting of commands and subcommands. Declare a top-level command by calling the Command func on the top-level App struct. For example, the following creates an application called docker that will have one command called run: The first argument is the name of the command the user will specify on the command line to invoke this command. The second argument is the description of the command shown in help messages. And, the last argument is a CmdInitializer, which is a function that receives a pointer to a Cmd struct representing the command. Within this function, define the options and arguments for the command by calling the same methods as you would with top-level App struct (BoolOpt, StringArg, ...). To execute code when the command is invoked, assign a function to the Action field of the Cmd struct. Within that function, you can safely refer to the options and arguments as command line parsing will be completed at the time the function is invoked: Optionally, to provide a more extensive description of the command, assign a string to LongDesc, which is displayed when a user invokes --help. A LongDesc can be provided for Cmds as well as the top-level App: Subcommands can be added by calling Command on the Cmd struct. They can by defined to any depth if needed: Command and subcommand aliases are also supported. To define one or more aliases, specify a space-separated list of strings to the first argument of Command: With the command structure defined above, users can invoke the app in a variety of ways: As a convenience, to assign an Action to a func with no arguments, use ActionCommand when defining the Command. For example, the following two statements are equivalent: Please note that options, arguments, specs, and long descriptions cannot be provided when using ActionCommand. This is intended for very simple command invocations that take no arguments. Finally, as a side-note, it may seem a bit weird that this package uses a function to initialize a command instead of simply returning a command struct. The motivation behind this API decision is scoping: as with the standard flag package, adding an option or an argument returns a pointer to a value which will be populated when the app is run. Since you'll want to store these pointers in variables, and to avoid having dozens of them in the same scope (the main func for example or as global variables), this API was specifically tailored to take a func parameter (called CmdInitializer), which accepts the command struct. With this design, the command's specific variables are limited in scope to this function. Interceptors, or hooks, can be defined to be executed before and after a command or when any of its subcommands are executed. For example, the following app defines multiple commands as well as a global flag which toggles verbosity: Instead of duplicating the check for the verbose flag and setting the debug level in every command (and its sub-commands), a Before interceptor can be set on the top-level App instead: Whenever a valid command is called by the user, all the Before interceptors defined on the app and the intermediate commands will be called, in order from the root to the leaf. Similarly, to execute a hook after a command has been called, e.g. to cleanup resources allocated in Before interceptors, simply set the After field of the App struct or any other Command. After interceptors will be called, in order, from the leaf up to the root (the opposite order of the Before interceptors). The following diagram shows when and in which order multiple Before and After interceptors are executed: To exit the application, use cli.Exit function, which accepts an exit code and exits the app with the provided code. It is important to use cli.Exit instead of os.Exit as the former ensures that all of the After interceptors are executed before exiting. An App or Command's invocation syntax can be customized using spec strings. This can be useful to indicate that an argument is optional or that two options are mutually exclusive. The spec string is one of the key differentiators between this package and other CLI packages as it allows the developer to express usage in a simple, familiar, yet concise grammar. To define option and argument usage for the top-level App, assign a spec string to the App's Spec field: Likewise, to define option and argument usage for a command or subcommand, assign a spec string to the Command's Spec field: The spec syntax is mostly based on the conventions used in POSIX command line applications (help messages and man pages). This syntax is described in full below. If a user invokes the app or command with the incorrect syntax, the app terminates with a help message showing the proper invocation. The remainder of this section describes the many features and capabilities of the spec string grammar. Options can use both short and long option names in spec strings. In the example below, the option is mandatory and must be provided. Any options referenced in a spec string MUST be explicitly declared, otherwise this package will panic. I.e. for each item in the spec string, a corresponding *Opt or *Arg is required: Arguments are specified with all-uppercased words. In the example below, both SRC and DST must be provided by the user (two arguments). Like options, any argument referenced in a spec string MUST be explicitly declared, otherwise this package will panic: With the exception of options, the order of the elements in a spec string is respected and enforced when command line arguments are parsed. In the example below, consecutive options (-f and -g) are parsed regardless of the order they are specified (both "-f=5 -g=6" and "-g=6 -f=5" are valid). Order between options and arguments is significant (-f and -g must appear before the SRC argument). The same holds true for arguments, where SRC must appear before DST: Optionality of options and arguments is specified in a spec string by enclosing the item in square brackets []. If the user does not provide an optional value, the app will use the default value specified when the argument was defined. In the example below, if -x is not provided, heapSize will default to 1024: Choice between two or more items is specified in a spec string by separating each choice with the | operator. Choices are mutually exclusive. In the examples below, only a single choice can be provided by the user otherwise the app will terminate displaying a help message on proper usage: Repetition of options and arguments is specified in a spec string with the ... postfix operator to mark an item as repeatable. Both options and arguments support repitition. In the example below, users may invoke the command with multiple -e options and multiple SRC arguments: Grouping of options and arguments is specified in a spec string with parenthesis. When combined with the choice | and repetition ... operators, complex syntaxes can be created. The parenthesis in the example below indicate a repeatable sequence of a -e option followed by an argument, and that is mutually exclusive to a choice between -x and -y options. Option groups, or option folding, are a shorthand method to declaring a choice between multiple options. I.e. any combination of the listed options in any order with at least one option selected. The following two statements are equivalent: Option groups are typically used in conjunction with optionality [] operators. I.e. any combination of the listed options in any order or none at all. The following two statements are equivalent: All of the options can be specified using a special syntax: [OPTIONS]. This is a special token in the spec string (not optionality and not an argument called OPTIONS). It is equivalent to an optional repeatable choice between all the available options. For example, if an app or a command declares 4 options a, b, c and d, then the following two statements are equivalent: Inline option values are specified in the spec string with the =<some-text> notation immediately following an option (long or short form) to provide users with an inline description or value. The actual inline values are ignored by the spec parser as they exist only to provide a contextual hint to the user. In the example below, "absolute-path" and "in seconds" are ignored by the parser: The -- operator can be used to automatically treat everything following it as arguments. In other words, placing a -- in the spec string automatically inserts a -- in the same position in the program call arguments. This lets you write programs such as the POSIX time utility for example: Below is the full EBNF grammar for the Specs language: By combining a few of these building blocks together (while respecting the grammar above), powerful and sophisticated validation constraints can be created in a simple and concise manner without having to define in code. This is one of the key differentiators between this package and other CLI packages. Validation of usage is handled entirely by the package through the spec string. Behind the scenes, this package parses the spec string and constructs a finite state machine used to parse the command line arguments. It also handles backtracking, which allows it to handle tricky cases, or what I like to call "the cp test": Without backtracking, this deceptively simple spec string cannot be parsed correctly. For instance, docopt can't handle this case, whereas this package does. By default an auto-generated spec string is created for the app and every command unless a spec string has been set by the user. This can simplify use of the package even further for simple syntaxes. The following logic is used to create an auto-generated spec string: 1) start with an empty spec string, 2) if at least one option was declared, append "[OPTIONS]" to the spec string, and 3) for each declared argument, append it, in the order of declaration, to the spec string. For example, given this command declaration: The auto-generated spec string, which should suffice for simple cases, would be: If additional constraints are required, the spec string must be set explicitly using the grammar documented above. By default, the following types are supported for options and arguments: bool, string, int, strings (slice of strings), and ints (slice of ints). You can, however, extend this package to handle other types, e.g. time.Duration, float64, or even your own struct types. To define your own custom type, you must implement the flag.Value interface for your custom type, and then declare the option or argument using VarOpt or VarArg respectively if using the short-form methods. If using the long-form struct, then use Var instead. The following example defines a custom type for a duration. It defines a duration argument that users will be able to invoke with strings in the form of "1h31m42s": To make a custom type to behave as a boolean option, i.e. doesn't take a value, it must implement the IsBoolFlag method that returns true: To make a custom type behave as a multi-valued option or argument, i.e. takes multiple values, it must implement the Clear method, which is called whenever the values list needs to be cleared, e.g. when the value was initially populated from an environment variable, and then explicitly set from the CLI: To hide the default value of a custom type, it must implement the IsDefault method that returns a boolean. The help message generator will use the return value to decide whether or not to display the default value to users:

goworker is a Resque-compatible, Go-based background worker. It allows you to push jobs into a queue using an expressive language like Ruby while harnessing the efficiency and concurrency of Go to minimize job latency and cost. goworker workers can run alongside Ruby Resque clients so that you can keep all but your most resource-intensive jobs in Ruby. To create a worker, write a function matching the signature and register it using Here is a simple worker that prints its arguments: To create workers that share a database pool or other resources, use a closure to share variables. goworker worker functions receive the queue they are serving and a slice of interfaces. To use them as parameters to other functions, use Go type assertions to convert them into usable types. For testing, it is helpful to use the redis-cli program to insert jobs onto the Redis queue: will insert 100 jobs for the MyClass worker onto the myqueue queue. It is equivalent to: After building your workers, you will have an executable that you can run which will automatically poll a Redis server and call your workers as jobs arrive. There are several flags which control the operation of the goworker client. -queues="comma,delimited,queues" — This is the only required flag. The recommended practice is to separate your Resque workers from your goworkers with different queues. Otherwise, Resque worker classes that have no goworker analog will cause the goworker process to fail the jobs. Because of this, there is no default queue, nor is there a way to select all queues (à la Resque's * queue). Queues are processed in the order they are specififed. If you have multiple queues you can assign them weights. A queue with a weight of 2 will weight of 1: -queues='high=2,low=1'. -interval=5.0 — Specifies the wait period between polling if no job was in the queue the last time one was requested. -concurrency=25 — Specifies the number of concurrently executing workers. This number can be as low as 1 or rather comfortably as high as 100,000, and should be tuned to your workflow and the availability of outside resources. -connections=2 — Specifies the maximum number of Redis connections that goworker will consume between the poller and all workers. There is not much performance gain over two and a slight penalty when using only one. This is configurable in case you need to keep connection counts low for cloud Redis providers who limit plans on maxclients. -uri=redis://localhost:6379/ — Specifies the URI of the Redis database from which goworker polls for jobs. Accepts URIs of the format redis://user:pass@host:port/db or unix:///path/to/redis.sock. The flag may also be set by the environment variable $($REDIS_PROVIDER) or $REDIS_URL. E.g. set $REDIS_PROVIDER to REDISTOGO_URL on Heroku to let the Redis To Go add-on configure the Redis database. -namespace=resque: — Specifies the namespace from which goworker retrieves jobs and stores stats on workers. -exit-on-complete=false — Exits goworker when there are no jobs left in the queue. This is helpful in conjunction with the time command to benchmark different configurations. You can also configure your own flags for use within your workers. Be sure to set them before calling goworker.Main(). It is okay to call flags.Parse() before calling goworker.Main() if you need to do additional processing on your flags. To stop goworker, send a QUIT, TERM, or INT signal to the process. This will immediately stop job polling. There can be up to $CONCURRENCY jobs currently running, which will continue to run until they are finished. Like Resque, goworker makes no guarantees about the safety of jobs in the event of process shutdown. Workers must be both idempotent and tolerant to loss of the job in the event of failure. If the process is killed with a KILL or by a system failure, there may be one job that is currently in the poller's buffer that will be lost without any representation in either the queue or the worker variable. If you are running Goworker on a system like Heroku, which sends a TERM to signal a process that it needs to stop, ten seconds later sends a KILL to force the process to stop, your jobs must finish within 10 seconds or they may be lost. Jobs will be recoverable from the Redis database under as a JSON object with keys queue, run_at, and payload, but the process is manual. Additionally, there is no guarantee that the job in Redis under the worker key has not finished, if the process is killed before goworker can flush the update to Redis.

Package engineapi provides libraries to implement client and server components compatible with the Docker engine. The client package in github.com/docker/engine-api/client implements all necessary requests to implement the official Docker engine cli. Create a new client, then use it to send and receive messages to the Docker engine API: Other programs, like Docker Machine, can set the default Docker engine environment for you. There is a shortcut to use its variables to configure the client: All request arguments are defined as typed structures in the types package. For instance, this is how to get all containers running in the host:

Package render provides a simple and flexible solutio to render a value to a io.Writer using different formats based on a format string argument. It is designed around using a custom type/struct to render your output. Thanks to Go's marshaling interfaces, you get JSON, YAML, and XML support almost for free. While plain text output is supported by the type implementing io.Reader, io.WriterTo, fmt.Stringer, or error interfaces, or by simply being a type which can easily be type cast to a byte slice. Originally intended to easily implement CLI tools which can output their data as plain text, as well as JSON/YAML with a simple switch of a format string. But it can just as easily render to any io.Writer. The package is designed to be flexible and extensible with a sensible set of defaults accessible via package level functions. You can create your own Renderer for custom formats, or create new handlers that support custom formats.

Package config is an extensible go configuration manager. The default parsers can parse the CLI arguments and the ini file. You can implement and register your parser, and the configuration engine will call the parser to parse the configuration. The inspiration is from [oslo.config](https://github.com/openstack/oslo.config), which is a OpenStack library for config.

Inertia is the command line interface that helps you set up your remote for continuous deployment and allows you to manage your deployment through configuration options and various commands. It can be installed in several ways: Users of other platforms can install the Inertia CLI from the Releases page, found here: https://github.com/ubclaunchpad/inertia/releases/latest To help with usage, most relevant documentation can be seen by using the --help flag on any command: Documentation can also be triggered by simply entering a command without the prerequisite arguments or additional commands: Inertia has two "core" sets of commands - one that primarily handles local configuration, and one that allows you to control your remote VPS instances and their associated deployments. For local configuration, most commands will build off of the root "inertia ..." command. For example, a typical set of commands to set up a project might look like: The other set of commands are based on a remote VPS configuration, and the available commands can be seen by running: In the previous example, the next steps to set up a deployment might be: Some of these commands offer a --stream flag that allows you to view realtime log feedback from the daemon. More documentation on Inertia, how it works, and how to use it can be found in the project repository: https://github.com/ubclaunchpad/inertia/tree/master

Inertia is the command line interface that helps you set up your remote for continuous deployment and allows you to manage your deployment through configuration options and various commands. It can be installed in several ways: Users of other platforms can install the Inertia CLI from the Releases page, found here: https://github.com/ubclaunchpad/inertia/releases/latest To help with usage, most relevant documentation can be seen by using the --help flag on any command: Documentation can also be triggered by simply entering a command without the prerequisite arguments or additional commands: Inertia has two "core" sets of commands - one that primarily handles local configuration, and one that allows you to control your remote VPS instances and their associated deployments. For local configuration, most commands will build off of the root "inertia ..." command. For example, a typical set of commands to set up a project might look like: The other set of commands are based on a remote VPS configuration, and the available commands can be seen by running: In the previous example, the next steps to set up a deployment might be: Some of these commands offer a --stream flag that allows you to view realtime log feedback from the daemon. More documentation on Inertia, how it works, and how to use it can be found in the project repository: https://github.com/ubclaunchpad/inertia/tree/master

Package cli provides boilerplate combining Kong CLI argument parsing with zerolog logging.

Package commando helps you create CLI applications with ease. It parses "getopt(3)" style command-line arguments, supports sub-command architecture, allows a short-name alias for flags and captures required and optional arguments.

Package engineapi provides libraries to implement client and server components compatible with the Docker engine. The client package in github.com/docker/engine-api/client implements all necessary requests to implement the official Docker engine cli. Create a new client, then use it to send and receive messages to the Docker engine API: Other programs, like Docker Machine, can set the default Docker engine environment for you. There is a shortcut to use its variables to configure the client: All request arguments are defined as typed structures in the types package. For instance, this is how to get all containers running in the host:

Package testaroli allows to monkey patch Go test binary, e.g. override functions and methods with stubs/mocks to simplify unit testing. It should be used only for unit testing and never in production! This package modifies actual executable at runtime, therefore is OS- and CPU arch-specific. Supported OS/arch combinations: It is recommended to switch off compiler optimisations and disable function inlining using `-gcflags="all=-N -l"` CLI option when running tests, like this: Typical use: It is also possible to override functions and methods in other packages, including ones from standard library, like in example below. Please note that method receiver becomes the first argument of the mock function.

Package commando helps you create CLI applications with ease. It parses "getopt(3)" style command-line arguments, supports sub-command architecture, allows a short-name alias for flags and captures required and optional arguments.

Package cli contains utilities for command line tools and server main()s to handle flags, arguments, version, logging (fortio.org/log), etc... Configure using the package variables (at minimum MinArgs unless your binary only accepts flags), setup additional flag before calling Main or fortio.org/scli.ServerMain for configmap and dynamic flags setup. Also supports (sub)commands style, see CommandBeforeFlags and Command.

gocli is yet another package to aid with parsing command line arguments. Unlike many other libraries, it focuses mainly on support of subcommands. Define as many subcommands as you want, they are handled by using FlagSets recursively. Simple yet powerful enough for many scenarios. The help output format is inspired among others by codegangsta's cli library.

gocli is yet another package to aid with parsing command line arguments. Unlike many other libraries, it focuses mainly on support of subcommands. Define as many subcommands as you want, they are handled by using FlagSets recursively. Simple yet powerful enough for many scenarios. The help output format is inspired among others by codegangsta's cli library.

Package cmds helps building both standalone and client-server applications. The basic building blocks are requests, commands, emitters and responses. A command consists of a description of the parameters and a function. The function is passed the request as well as an emitter as arguments. It does operations on the inputs and sends the results to the user by emitting them. There are a number of emitters in this package and subpackages, but the user is free to create their own. A command is a struct containing the commands help text, a description of the arguments and options, the command's processing function and a type to let the caller know what type will be emitted. Optionally one of the functions PostRun and Encoder may be defined that consumes the function's emitted values and generates a visual representation for e.g. the terminal. Encoders work on a value-by-value basis, while PostRun operates on the value stream. An emitter has the Emit method, that takes the command's function's output as an argument and passes it to the user. The command's function does not know what kind of emitter it works with, so the same function may run locally or on a server, using an rpc interface. Emitters can also send errors using the SetError method. The user-facing emitter usually is the cli emitter. Values emitter here will be printed to the terminal using either the Encoders or the PostRun function. A response is a value that the user can read emitted values from. Responses have a method Next() that returns the next emitted value and an error value. If the last element has been received, the returned error value is io.EOF. If the application code has sent an error using SetError, the error ErrRcvdError is returned on next, indicating that the caller should call Error(). Depending on the reponse type, other errors may also occur. Pipes are pairs (emitter, response), such that a value emitted on the emitter can be received in the response value. Most builtin emitters are "pipe" emitters. The most prominent examples are the channel pipe and the http pipe. The channel pipe is backed by a channel. The only error value returned by the response is io.EOF, which happens when the channel is closed. The http pipe is backed by an http connection. The response can also return other errors, e.g. if there are errors on the network. To get a better idea of what's going on, take a look at the examples at https://github.com/TRON-US/go-btfs-cmds/tree/master/examples.

Package cli can be used to create modern command line interfaces. User interfaces created with Command and CommandSet take the form of the application name followed by the subcommand which may do its own parsing on all arguments after it. For instance, if recreating the "git" command it might have a subcommand called "commit" and each could have their own flags: See the examples for the definition of this command.

Package command is used to create command line interfaces (CLI), using reflection to define command flags (options) from the public (exported) fields of any Go struct type. It also uses reflection to map other command line arguments (after flags) to the arguments of the command's Run method. It supports scalar fields (string, int, ...). It also supports struct or struct pointer fields, whose fields are also added as flags. The optional "name" and "usage" field tags are used to set the flag name and usage, or to exclude a field from being used as a flag. See demo.App for an example. A command has a hierarchy of sub-commands. Each sub-command can have additional flags. Flag default values cab be specified in an optional Init() method. Flag validation can be performed in an optional Configured() method. command uses the Go flags package for command-line processing.

Package cli is used to build the front-end of command-line applications. Commands have zero or more mandatory arguments, and zero or more optional parameters. An example of a command invocation is: Optional parameters can be boolean values, which are specified with a single hyphen: Optional parameters that can take on a value must be specified like this: If no command is given, then the application help is displayed, for example: If one invokes help on a specific command, then details for that command are shown:

goworker is a Resque-compatible, Go-based background worker. It allows you to push jobs into a queue using an expressive language like Ruby while harnessing the efficiency and concurrency of Go to minimize job latency and cost. goworker workers can run alongside Ruby Resque clients so that you can keep all but your most resource-intensive jobs in Ruby. To create a worker, write a function matching the signature and register it using Here is a simple worker that prints its arguments: To create workers that share a database pool or other resources, use a closure to share variables. goworker worker functions receive the queue they are serving and a slice of interfaces. To use them as parameters to other functions, use Go type assertions to convert them into usable types. For testing, it is helpful to use the redis-cli program to insert jobs onto the Redis queue: will insert 100 jobs for the MyClass worker onto the myqueue queue. It is equivalent to: After building your workers, you will have an executable that you can run which will automatically poll a Redis server and call your workers as jobs arrive. There are several flags which control the operation of the goworker client. -queues="comma,delimited,queues" — This is the only required flag. The recommended practice is to separate your Resque workers from your goworkers with different queues. Otherwise, Resque worker classes that have no goworker analog will cause the goworker process to fail the jobs. Because of this, there is no default queue, nor is there a way to select all queues (à la Resque's * queue). Queues are processed in the order they are specififed. If you have multiple queues you can assign them weights. A queue with a weight of 2 will weight of 1: -queues='high=2,low=1'. -interval=5.0 — Specifies the wait period between polling if no job was in the queue the last time one was requested. -concurrency=25 — Specifies the number of concurrently executing workers. This number can be as low as 1 or rather comfortably as high as 100,000, and should be tuned to your workflow and the availability of outside resources. -connections=2 — Specifies the maximum number of Redis connections that goworker will consume between the poller and all workers. There is not much performance gain over two and a slight penalty when using only one. This is configurable in case you need to keep connection counts low for cloud Redis providers who limit plans on maxclients. -uri=redis://localhost:6379/ — Specifies the URI of the Redis database from which goworker polls for jobs. Accepts URIs of the format redis://user:pass@host:port/db or unix:///path/to/redis.sock. The flag may also be set by the environment variable $($REDIS_PROVIDER) or $REDIS_URL. E.g. set $REDIS_PROVIDER to REDISTOGO_URL on Heroku to let the Redis To Go add-on configure the Redis database. -namespace=resque: — Specifies the namespace from which goworker retrieves jobs and stores stats on workers. -exit-on-complete=false — Exits goworker when there are no jobs left in the queue. This is helpful in conjunction with the time command to benchmark different configurations. You can also configure your own flags for use within your workers. Be sure to set them before calling goworker.Main(). It is okay to call flags.Parse() before calling goworker.Main() if you need to do additional processing on your flags. To stop goworker, send a QUIT, TERM, or INT signal to the process. This will immediately stop job polling. There can be up to $CONCURRENCY jobs currently running, which will continue to run until they are finished. Like Resque, goworker makes no guarantees about the safety of jobs in the event of process shutdown. Workers must be both idempotent and tolerant to loss of the job in the event of failure. If the process is killed with a KILL or by a system failure, there may be one job that is currently in the poller's buffer that will be lost without any representation in either the queue or the worker variable. If you are running Goworker on a system like Heroku, which sends a TERM to signal a process that it needs to stop, ten seconds later sends a KILL to force the process to stop, your jobs must finish within 10 seconds or they may be lost. Jobs will be recoverable from the Redis database under as a JSON object with keys queue, run_at, and payload, but the process is manual. Additionally, there is no guarantee that the job in Redis under the worker key has not finished, if the process is killed before goworker can flush the update to Redis.

Package cli provides command line lexing and parsing. This package only focuses on parsing command line arguments and options. Features It does Not provide type converters from string value. This is intentional, see subdirectory dst for useful converters.

Package cli helps to build command-line programs with multiple commands. A command is created by defining a struct with a Run method. The exported fields of the struct are populated with the flags and command-line arguments passed to on the command line, as determined by struct tags. For example, here is a struct that could be used for a "compare" command that takes two files and a "-v" flag: The command's logic is provided in a Run method: Before the Run method is called, the command line flags and arguments are parsed and assigned to the fields of the receiver struct. All commands must be registered, usually at program startup. Begin with a top-level command representing the program itself. Typically no behavior is associated with the top-level command, so the line suffices. The top command uses the default flag set of the standard library's flag package, so global flags can be defined as usual. The value of top is a *cli.Command. Sub-commands are configured by registering a Command struct with an existing Command. Given the compare struct and the top variable shown above, we can register a compare command with or more succinctly, That code can be put in an init method or at the start of main. The Top function takes a Command just like the RegisterCommand function, so you can provide behavior for the top-level command by defining a struct with a Run method, constructing a Command with it, and passing it to Top. The struct associated with a command completely describes the command's flags and positional arguments. Each exported field can have a struct tag with a "cli" key that provides the usage documentation for the argument or flag as well as some options. An exported field without a tag is treated as a positional argument with no documentation. Unexported fields are ignored. A field's type can be any string, bool, integer, floating point or duration type, or a slice of one of those types. If the slice is used for a flag, the flag's value is split on commas to populate the slice. Otherwise, the slice field must represent the last positional argument, and its value is taken from the remaining command-line arguments. The tag syntax is a comma-separated lists of key=value pairs. The keys are: For example, the field and struct tag will display the argument as ENV in documentation along with the string "development environment", and will check that the value on the command line is either "dev" or "prod". See the package examples for more. The Go flag package provides control over the word printed as the flag's value in documentation, by looking for backticks in the usage string. To use this feature, enclose the struct tag in double quotes instead of backticks. As a convenience, this package can interpret bare struct tags that don't have the usual 'key:"value"' format, which makes this cleaner: Once the top-level command has been created and all sub-commands have been registered, call the Main method to invoke the appropriate command and get back an exit code. If the other work has been done with a global "top" variable and init functions, then the entire main function can be For more control, you can call Command.Run with a context and a slice of arguments, and handle the error yourself. Shell completion for common shells is supported with the github.com/posener/complete/v2 package. Completion logic is automatically invoked if your program calls Command.Main. To install completion for a program, run it with the COMP_INSTALL environment variable set to 1.

Package cmds helps building both standalone and client-server applications. The basic building blocks are requests, commands, emitters and responses. A command consists of a description of the parameters and a function. The function is passed the request as well as an emitter as arguments. It does operations on the inputs and sends the results to the user by emitting them. There are a number of emitters in this package and subpackages, but the user is free to create their own. A command is a struct containing the commands help text, a description of the arguments and options, the command's processing function and a type to let the caller know what type will be emitted. Optionally one of the functions PostRun and Encoder may be defined that consumes the function's emitted values and generates a visual representation for e.g. the terminal. Encoders work on a value-by-value basis, while PostRun operates on the value stream. An emitter has the Emit method, that takes the command's function's output as an argument and passes it to the user. The command's function does not know what kind of emitter it works with, so the same function may run locally or on a server, using an rpc interface. Emitters can also send errors using the SetError method. The user-facing emitter usually is the cli emitter. Values emitter here will be printed to the terminal using either the Encoders or the PostRun function. A response is a value that the user can read emitted values from. Responses have a method Next() that returns the next emitted value and an error value. If the last element has been received, the returned error value is io.EOF. If the application code has sent an error using SetError, the error ErrRcvdError is returned on next, indicating that the caller should call Error(). Depending on the reponse type, other errors may also occur. Pipes are pairs (emitter, response), such that a value emitted on the emitter can be received in the response value. Most builtin emitters are "pipe" emitters. The most prominent examples are the channel pipe and the http pipe. The channel pipe is backed by a channel. The only error value returned by the response is io.EOF, which happens when the channel is closed. The http pipe is backed by an http connection. The response can also return other errors, e.g. if there are errors on the network. To get a better idea of what's going on, take a look at the examples at https://github.com/ipfs/go-ipfs-cmds/tree/master/examples.

Package goworker is a Resque-compatible, Go-based background worker. It allows you to push jobs into a queue using an expressive language like Ruby while harnessing the efficiency and concurrency of Go to minimize job latency and cost. goworker workers can run alongside Ruby Resque clients so that you can keep all but your most resource-intensive jobs in Ruby. To create a worker, write a function matching the signature and register it using Here is a simple worker that prints its arguments: To create workers that share a database pool or other resources, use a closure to share variables. goworker worker functions receive the queue they are serving and a slice of interfaces. To use them as parameters to other functions, use Go type assertions to convert them into usable types. For testing, it is helpful to use the redis-cli program to insert jobs onto the Redis queue: will insert 100 jobs for the MyClass worker onto the myqueue queue. It is equivalent to: After building your workers, you will have an executable that you can run which will automatically poll a Redis server and call your workers as jobs arrive. There are several flags which control the operation of the goworker client. -queues="comma,delimited,queues" — This is the only required flag. The recommended practice is to separate your Resque workers from your goworkers with different queues. Otherwise, Resque worker classes that have no goworker analog will cause the goworker process to fail the jobs. Because of this, there is no default queue, nor is there a way to select all queues (à la Resque's * queue). Queues are processed in the order they are specififed. If you have multiple queues you can assign them weights. A queue with a weight of 2 will be checked twice as often as a queue with a weight of 1: -queues='high=2,low=1'. -interval=5.0 — Specifies the wait period between polling if no job was in the queue the last time one was requested. -concurrency=25 — Specifies the number of concurrently executing workers. This number can be as low as 1 or rather comfortably as high as 100,000, and should be tuned to your workflow and the availability of outside resources. -connections=2 — Specifies the maximum number of Redis connections that goworker will consume between the poller and all workers. There is not much performance gain over two and a slight penalty when using only one. This is configurable in case you need to keep connection counts low for cloud Redis providers who limit plans on maxclients. -uri=redis://localhost:6379/ — Specifies the URI of the Redis database from which goworker polls for jobs. Accepts URIs of the format redis://user:pass@host:port/db or unix:///path/to/redis.sock. The flag may also be set by the environment variable $($REDIS_PROVIDER) or $REDIS_URL. E.g. set $REDIS_PROVIDER to REDISTOGO_URL on Heroku to let the Redis To Go add-on configure the Redis database. -namespace=resque: — Specifies the namespace from which goworker retrieves jobs and stores stats on workers. -exit-on-complete=false — Exits goworker when there are no jobs left in the queue. This is helpful in conjunction with the time command to benchmark different configurations. -use-number=false — Uses json.Number when decoding numbers in the job payloads. This will avoid issues that occur when goworker and the json package decode large numbers as floats, which then get encoded in scientific notation, losing pecision. This will default to true soon. You can also configure your own flags for use within your workers. Be sure to set them before calling goworker.Main(). It is okay to call flags.Parse() before calling goworker.Main() if you need to do additional processing on your flags. To stop goworker, send a QUIT, TERM, or INT signal to the process. This will immediately stop job polling. There can be up to $CONCURRENCY jobs currently running, which will continue to run until they are finished. Like Resque, goworker makes no guarantees about the safety of jobs in the event of process shutdown. Workers must be both idempotent and tolerant to loss of the job in the event of failure. If the process is killed with a KILL or by a system failure, there may be one job that is currently in the poller's buffer that will be lost without any representation in either the queue or the worker variable. If you are running Goworker on a system like Heroku, which sends a TERM to signal a process that it needs to stop, ten seconds later sends a KILL to force the process to stop, your jobs must finish within 10 seconds or they may be lost. Jobs will be recoverable from the Redis database under as a JSON object with keys queue, run_at, and payload, but the process is manual. Additionally, there is no guarantee that the job in Redis under the worker key has not finished, if the process is killed before goworker can flush the update to Redis.

Package cli is meant to make handling command line interface easier. You define commands with flags, attach a handler to it and package does all the parsing. Ensure you have your workspace directory created. Let's start with an example covering everything. First, let's create main CLI instance and commands: Next, let's add flags to our commands (inside main()): Fifth argument to `NewCLIFlag` is used to define what is the type of flag, is it required etc. It's an integer value and the following `const`s are available: Check cli_flag.go for more information on flag types. Finally, let's create functions to handle our commands. In below code, you can see that method Flag on CLI instance (passed as first argument) can be used to get a flag value. And in the end of main() func:

Package cli is meant to make handling command line interface easier. You define commands with flags, attach a handler to it and package does all the parsing. Ensure you have your workspace directory created. Let's start with an example covering everything. First, let's create main CLI instance and commands: Next, let's add flags to our commands (inside main()): Fifth argument to `NewCLIFlag` is used to define what is the type of flag, is it required etc. It's an integer value and the following `const`s are available: Check cli_flag.go for more information on flag types. Finally, let's create functions to handle our commands. In below code, you can see that method Flag on CLI instance (passed as first argument) can be used to get a flag value. And in the end of main() func:

Package cmds helps building both standalone and client-server applications. The basic building blocks are requests, commands, emitters and responses. A command consists of a description of the parameters and a function. The function is passed the request as well as an emitter as arguments. It does operations on the inputs and sends the results to the user by emitting them. There are a number of emitters in this package and subpackages, but the user is free to create their own. A command is a struct containing the commands help text, a description of the arguments and options, the command's processing function and a type to let the caller know what type will be emitted. Optionally one of the functions PostRun and Encoder may be defined that consumes the function's emitted values and generates a visual representation for e.g. the terminal. Encoders work on a value-by-value basis, while PostRun operates on the value stream. An emitter has the Emit method, that takes the command's function's output as an argument and passes it to the user. The command's function does not know what kind of emitter it works with, so the same function may run locally or on a server, using an rpc interface. Emitters can also send errors using the SetError method. The user-facing emitter usually is the cli emitter. Values emitter here will be printed to the terminal using either the Encoders or the PostRun function. A response is a value that the user can read emitted values from. Responses have a method Next() that returns the next emitted value and an error value. If the last element has been received, the returned error value is io.EOF. If the application code has sent an error using SetError, the error ErrRcvdError is returned on next, indicating that the caller should call Error(). Depending on the reponse type, other errors may also occur. Pipes are pairs (emitter, response), such that a value emitted on the emitter can be received in the response value. Most builtin emitters are "pipe" emitters. The most prominent examples are the channel pipe and the http pipe. The channel pipe is backed by a channel. The only error value returned by the response is io.EOF, which happens when the channel is closed. The http pipe is backed by an http connection. The response can also return other errors, e.g. if there are errors on the network. To get a better idea of what's going on, take a look at the examples at https://github.com/fgeth/fg-ipfs-cmds/tree/master/examples.

Package clicache provides file-based caching tailored for CLI applications. It allows CLI applications to cache data based on command arguments, and supports TTL-based cache expiration.

Package broccli is meant to make handling command line interface easier. You define commands with flags, attach a handler to it and package does all the parsing. Ensure you have your workspace directory created. Let's start with an example covering everything. First, let's create main CLI instance and commands: Next, let's add flags to our commands (inside main()): Fifth argument to `NewCLIFlag` is used to define what is the type of flag, is it required etc. It's an integer value and the following `const`s are available: Check cli_flag.go for more information on flag types. Finally, let's create functions to handle our commands. In below code, you can see that method Flag on CLI instance (passed as first argument) can be used to get a flag value. And in the end of main() func:

Package mcm-cli provides a generic command line argument processing capability for XML-oriented programs. It provides a large set of useful arguments that can be individually (or as a group) enabled or disabled (i.e. hidden). The package imports github.com/fbaube/(fileutils,stringutils,wasmutils) .