@applitools/eyes.cypress

Eyes.Cypress

Applitoos Eyes SDK for Cypress.

Installation

Install npm package

Install Eyes.Cypress as a local dev dependency in your tested project:

npm install --save-dev @applitools/eyes.cypress

Configure plugin and commands

Automatic configuration

Run the following command in your terminal:

npx eyes-setup

The above command will add the necessary imports to your cypress pluginsFile and supportFile, as described in the manual configuration below.

Manual configuration

Configure Eyes.Cypress plugin

Eyes.Cypress acts as a Cypress plugin, so it should be configured as such. Unfortunately there's no easy way to do this automatically, so you need to manually add the following code to your pluginsFile:

require('@applitools/eyes.cypress')

Normally, this is cypress/plugins/index.js. You can read more about it in Cypress' docs here.

Configure custom commands

Eyes.Cypress exposes new commands to your tests. This means that more methods will be available on the cy object. To enable this, it's required to configure these custom commands. As with the plugin, there's no automatic way to configure this in cypress, so you need to manually add the following code to your supportFile:

import '@applitools/eyes.cypress/commands'

Normally, this is cypress/support/index.js. You can read more about it in Cypress' docs here.

Applitools API key

In order to authenticate via the Applitools server, you need to supply the Eyes.Cypress SDK with the API key you got from Applitools. Read more about how to obtain the API key here.

To to this, set the environment variable APPLITOOLS_API_KEY to the API key before running your tests. For example, on Linux/Mac:

export APPLITOOLS_API_KEY=<your_key>
npx cypress open

And on Windows:

set APPLITOOLS_API_KEY=<your_key>
npx cypress open

Usage

After completing the configuation (either automatic or manual) and defining the API key, you will be able to use commands from Eyes.Cypress in your cypress tests to take screenshots and use Applitools Eyes to manage them:

Example

describe('Hello world', () => {
  it('works', () => {
    cy.visit('https://applitools.com/helloworld');
    cy.eyesOpen({
      appName: 'Hello World!',
      testName: 'My first JavaScript test!',
      browser: { width: 800, height: 600 },
    });
    cy.eyesCheckWindow('Main Page');
    cy.get('button').click();
    cy.eyesCheckWindow('Click!');
    cy.eyesClose();
  });
});

Commands

In addition to the built-in commands provided by Cypress, like cy.visit and cy.get, Eyes.Cypress defines new custom commands, which enable the visual testing with Applitools Eyes. These commands are:

Open

Create an Applitools test. This will start a session with the Applitools server.

cy.eyesOpen({
  appName: '',
  testName: ''
});

It's possible to pass a config object to eyesOpen with all the possible configuration properties. Read the [Advanced configuration] section for a detailed description.

Check window

Generate a screenshot of the current page and add it to the Applitools Test.

cy.eyesCheckWindow(tag)

OR

cy.eyesCheckWindow({ tag: 'your tag', sizeMode: 'your size mode' })

Arguments to cy.eyesCheckWindow

• tag (optional): A logical name for this check.
• sizeMode (optional): Possible values are viewport or full-page. The default is full-page, which means a screenshot of everything that exists in the DOM at the point of calling eyesCheckWindow will be rendered. If set to viewport, only a screenshot the size of the browser will be rendered (the size of the browser can be set in the call to cy.eyesOpen - see advanced configuration below).

Close

close the applitools test and check that all screenshots are valid.

It is important to call this at the end (or after()) each test, symmetrically to eyesOpen.

cy.eyesClose({ timeout });

Arguments to cy.eyesClose

• timeout (optional): Depending on various factors such as the website's size and number of screenshots (i.e. the number of calls to cy.eyesCheckWindow()), the elapsed time it takes for cy.eyesClose to complete may vary. The default timeout is 120000 (2 minutes), and it's possible to pass a different value for cases where this need to be larger (e.g. 180000 for setting the timeout to 3 minutes).

Advanced configuration

It's possible to define the following configuration for tests:

Property name	Default value	Description
testName	''	Test name
browser	{ width: 800, height: 600 }	The size of the generated screenshots. This doesn't need to be the same as the size of the browser that Cypress is running. It's also possible to send an array of sizes: It's also possible to send an array of sizes, e.g. [{width: 800, height: 600}, { width: 1024, height: 768 }]
showLogs	false	Whether or not you want to see logs of the Eyes.Cypress plugin. Logs are written to the same output of the Cypress process.
saveDebugData	false	Whether to save troubleshooting data. See the troubleshooting section of this doc for more info.
batchId	random	Provides ability to group tests into batches. Read more about batches here.
batchName	undefined	Provides a name to the batch.
baselineBranchName	undefined	The name of the baseline branch.
baselineEnvName	undefined	The name of the environment of the baseline.
envName	undefined	A name for the environment in which the application under test is running.
ignoreCaret	false	Whether to ignore or the blinking caret or not when comparing images.
isDisabled	false	If true, all calls to Eyes.Cypress commandswill be silently ignored.
matchLevel	undefined	The test-wide match level to use when checking application screenshot with the expected output. Possible values are Strict, Exact, Layout and Content. Read more about match levels here.
matchTimeout	undefined	Sets the maximum time (in ms) a match operation tries to perform a match.
parentBranchName	undefined	Sets the branch under which new branches are created.
proxy	undefined	Sets the proxy settings to be used in network requests to Eyes server.
saveFailedTests	false	Set whether or not failed tests are saved by default.
saveNewTests	false	Set whether or not new tests are saved by default.
serverUrl	Default Eyes server URL	The URL of Eyes server
compareWithParentBranch	false
ignoreBaseline	false

There are 3 ways to specify test configuration:

1. Arguments to cy.eyesOpen()
2. Environment variables
3. The eyes.json file

The list above is also the order of precedence, which means that if you pass a property to cy.eyesOpen it will override the environment variable, and the environment variable will override the value defined in the eyes.json file.

Method 1: Arguments for cy.eyesOpen

Pass a config object as the only argument. For example:

cy.eyesOpen({
  appName: 'My app',
  testName: 'My test',
  showLogs: true,
  batchName: 'My batch'
})

Method 2: Environment variables

The name of the corresponding environment variable is in uppercase, with the APPLITOOLS_ prefix, and separating underscores instead of camel case:

APPLITOOLS_APP_NAME
APPLITOOLS_TEST_NAME
APPLITOOLS_VIEWPORT_SIZE
APPLITOOLS_SHOW_LOGS
APPLITOOLS_SAVE_DEBUG_DATA
APPLITOOLS_BATCH_NAME

Method 3: The eyes.json file

It's possible to have a file called eyes.json at the same folder location as cypress.json. In this file specify the desired configuration, in a valid JSON format. For example:

{
  "appName": "My app",
  "showLogs": true,
  "batchName": "My batch"
}

Plugin port

The Eyes.Cypress SDK has 2 parts: (1) a cypress plugin, and (2) custom commands that run in the browser. The SDK uses a local server for communication between those 2 parts. The plugin is responsible for starting the server, and the custom commands send requests to this server operate the SDK.

By default, the server listens at port 7373 , but that may be altered for cases where this port is already taken.

Option 1: Default port

When configuring the plugin as described in the section 'Configure Eyes.Cypress plugin' above, the port that will be used is 7373:

require('@applitools/eyes.cypress')

Option 2: Custom port

In some cases, the 7373 port might be unavailable, so in order to use a different port, you may do the following:

require('@applitools/eyes.cypress')({ port: 8484 })

When doing so, it's also necessary to pass the port as a Cypress config variable to the browser, so in the pluginsFile add a property named eyesPort to your configuration:

module.exports = () => {
  ...
  return {
    eyesPort: 8484,
    ...
  };
}

Option 3: Available port

If you want to be absolutely sure that Eyes.Cypress will use an available port, it's also possible to pass 0 as the port:

const { getEyesPort } = require('@applitools/eyes.cypress')({ port: 0 });

Now it is guaranteed that eyesPort is available. Now it's also necessary to pass the port as a Cypress config variable on to the browser. So in the pluginsFile add a property named eyesPort to your configuration:

module.exports = () => {
  ...
  return {
    eyesPort: (await getEyesPort()),
    ...
  }
}

Troubleshooting

If issues occur, the saveDebugData config property can be set to true in order to save helpful information. The information will be saved under a folder named .applitools in the current working directory. This could be then used for getting support on your issue.