@fimbul/wotan

Wotan

Pluggable TypeScript and JavaScript linter

Make sure to also read the full documentation of all available modules.

Quick Start

Install Wotan as a local dependency:

npm install --save-dev @fimbul/wotan
# or
yarn add -D @fimbul/wotan

Add a .wotanrc.yaml file to the root of your project with the following content:

extends: wotan:recommended

That enables all recommended builtin rules. See the below for a list of available rules and how the configuration works.

Now you can run the linter with one of the following commands depending on your use case:

wotan -p <path/to/tsconfig.json> # lint the whole project
wotan 'src/**/*.ts' -e '**/*.d.ts' # lint all typescript files excluding declaration files
wotan --fix # lint the whole project and fix all fixable errors
wotan -p tsconfig.json -r # lint the specified project and all projects in its 'references'

Editor Integration

For instructions how to integrate the linter into your editor, see the documentation of the @fimbul/mithotyn package.

Available Rules

For a list of available rules, see the documentation of the @fimbul/mimir package.

Configuration

Wotan is configured with a YAML, JSON5 or JSON file named .wotanrc.yaml, .wotanrc.json5 or .wotanrc.json. By default the configuration file from the closest parent folder is used to lint each file.

You can use different configurations for different directories. Consider the following setup:

.wotanrc.yaml describes the rules that apply to every file and subdirectory (unless they contain a cofiguration file themselves):

---
extends: wotan:recommended # use all recommended rules

test/.wotanrc.json extends the base configuration and disables some rules that are not needed for tests:

{
    "extends": "../.wotanrc.yaml",
    "rules": {
        "no-useless-assertion": "off",
        "await-only-promise": "warn"
    }
}

Note: this describes the default configuration file name and content. Plugin modules are able to override this behavior to read files with different name or content.

Overrides

If you are more into having a single place for configuration, here's an alternative solution for the example above. The .wotanrc.yaml could look like this:

---
extends: wotan:recommended # use all recommended rules, could be an array to extend multiple configs
rules: # could override some rules for all files here
overrides:
  - files: "test/**" # override the following rules for all files in the `test` folder
    rules:
      no-useless-assertion: off
      await-only-promise: warn
  - files: "*.spec.ts" # override the following rules for all *.spec.ts files in all directories
    rules:
      no-debugger: off

Overrides are processed in order and applied in order. The latter one overrides all prior overrides.

Note that in the example above *.spec.ts matches in all directories. Normally patterns are matched relative to the configuration file they are specified in. Patterns without any slash are treated special. They will only be matched against the basename of every file in every directory. If you want to limit the pattern to the current directory, you can prefix it with ./ resulting in ./*.spec.ts.

* also matches the leading do if present, so you don't need a second glob pattern for dotfiles. That means *.spec.ts matches .some.spec.ts as well as some.spec.ts.

Configuring Rules

Rules can have one of 4 different severities: error, warning (or warn), suggestion (or hint) and off. error is reported and causes the process to end with an exit code of 2. This is the default if not specified. warning is reported but doesn't cause a non-zero exit code. suggestion treated like warning but displayed differently. off turns the rule off, of course.

Configurable rules get their options through an object. The content of the "options" property varies based on the rule.

{
    "rules": {
        "some-rule": {
            "severity": "error",
            "options": {
                "some-option": "some-option-value"
            }
        }
    }
}

severity and options are both optional. That allows you to extend a configuration and only change the severity of a rule without altering the options. Or you can change the rule's options without changing the severity inherited by the base config.

Display Configuration

If the linter behaves somehow unexpected, it's probably because you configured it that way. You're lucky because there's a builtin command to diagnose this, so you don't need to know how the configuration file lookup and the handling of overrides, excludes and aliases works in detail.

Just use wotan show <filename> to display the configuration file and the exact rule config used to lint this file. If there is no file found or the file is excluded, you will see that too.

Enable or disable rules with comments

Sometimes you need to enable or disable a specific rule or all rules for a section of a file. This can be done using comments. It doesn't matter if you use // or /* */. Multiple rule names are separated by comma. It's not possible to enable a rule with a comment if that rule is not already enabled in the configuration for that file. That means comments can only enable rules that were previously disabled by a comment.

• // wotan-disable disables all rules from the start of the comment until the end of the file (or until it is enabled again)
• // wotan-enable enables all rules from the start of the comment until the end of the file. Enable comments have the same mechanics as disable comments.
• // wotan-disable-line disables all rules in the current line (also works with enable)
• // wotan-disable-next-line disables all rules in the next line (also works with enable)
• // wotan-disable-next-line bar, local/baz disables the rules bar and local/baz in the next line
• // wotan-enable-line foo enables the rule foo in the current line
• // wotan-enable-next-line bar, local/baz enables the rules bar and local/baz in the next line

This is the default behavior which can be overridden by plugin modules.

To detect unused or redundant comments you can use the --report-useless-directives CLI option.

CLI Options

• -c --config <name> specifies the configuration to use for all files instead of looking for configuration files in parent directories. This can either be a file name, the name of a node module containing a shareable config, or the name of a builtin config like wotan:recommended
• -e --exclude <glob> excludes all files that match the given glob pattern from linting. This option can be used multiple times to specify multiple patterns. For example -e '**/*.js' -e '**/*.d.ts'. It is recommended to wrap the glob patterns in single quotes to prevent the shell from expanding them.
• --fix [true|false|number] automatically fixes all fixable findings in your code and writes the result back to disk. Given a number it will at most use the specified number of iterations for fixing before returning the result. There are some precautions to prevent overlapping fixes from destroying you code. You should however commit your changes before using this feature. Files containing syntax errors are never fixed. If applying fixes would cause syntax errors, the fixes will not be applied.
• -f --formatter <name> the name or path of a formatter. This can either be a file name, the name of a node module contianing a formatter, or the name of a builtin formatter. Currently available builtin formatters are json and stylish (default).
• -m --module <name> specifies one or more packages with DI modules to load before starting the actual linter. These modules can be used to override the default behavior.
• -p --project <name> specifies the path to the tsconfig.json file to use. This option is used to find all files contained in your project. It also enables rules that require type information. This option can be used multiple times to specify multiple projects to lint.
• -r --references [true|false] enables project references. Starting from the project specified with -p --project or the tsconfig.json in the current directory it will recursively follow all "references" and lint those projects.
• --report-useless-directives [true|false|error|warning|suggestion] reports // wotan-disable and // wotan-enable comments that are redundant (i.e. rules are already disabled) or unused (there are no findings for the specified rules). Useless directives are reported as lint findings with the specified severity (true is converted to error). Those findings cannot be disabled by a disable comment. The findings are fixable which allow autofixing when used with the --fix option.
• [...FILES] specifies the files to lint. You can specify paths and glob patterns here.

Note that all file paths are relative to the current working directory. Therefore **/*.ts doesn't match ../foo.ts.

Examples

The following examples are intended to be used as npm scripts. If you want to execute it directly on the command line, you need to use ./node_modules/.bin/wotan instead of just wotan.

wotan # search the closest tsconfig.json and lint the whole project with type information
wotan -c wotan:recommended # same as above, but uses the specified configuration for all files in the project
wotan -c wotan:recommended --fix # same as above with automatic fixing
wotan '**/*.ts' -e '**/*.d.ts' -e 'node_modules/**' # lint all typescript files excluding declaration files, also excludes node_modules just to be sure
wotan -p . # lint the whole project configured by ./tsconfig.json, with type information, excludes node_modules by default
wotan -p . 'src/**' # lint all files in src directory that are included in the project with type information
wotan -p src -p test # lint all files in project 'src' and all files in project 'test'
wotan -p . -r # lint the whole project configured by ./tsconfig.json all all of its project references
wotan -m @fimbul/heimdall # enables TSLint rules and formatters to be used. for more information, see @fimbul/heimdall

Adding CLI defaults to .fimbullinter.yaml

If you find yourself using Wotan with the same CLI arguments over and over again, you can simply save them as defaults to a file called .fimbullinter.yaml. By default Wotan uses this file for CLI defaults if it's present in your current working directory.

There's a subcommand to create and update this file, so you don't need to know any implementation details to guess the file structure.

Let's assume you always use the following CLI arguments:

wotan -p tsconfig.build.json -c config/.wotanrc.yaml -e '**/*.d.ts'

To save these as defaults, simply use the save subcommand:

wotan save -p tsconfig.build.json -c config/.wotanrc.yaml -e '**/*.d.ts'

You just created a .fimbullinter.yaml file with the following contents:

config: config/.wotanrc.yaml
exclude:
  - "**/*.d.ts"
project: tsconfig.build.json

The next time you execute wotan in that directory, this default configuration is automatically picked up.

Defaults can be overridden or cleared by explicitly specifying them as CLI arguments, for example:

wotan -p tsconfig.json -e '' # overrides 'project' and clears 'exclude'

wotan save -c '' # clear 'config' option and update .fimbullinter.yaml

Note that .fimbullinter.yaml can also be used to store configuration for plugin modules. See the documentation of the plugins you use if this applies to you. In that case you need to edit the file manually. Using wotan save will not alter third party configuration.

Linting with Type Information

When linting a project (--project CLI option) rules are able to use type information using TypeScript's API. Some rules report more findings with type information, some other rules require type information for each of their checks. If a rule cannot work properly without type information, you will see a warning like Rule 'foo' requires type information.

Special Handling of JavaScript Files

TypeScript can analyze and check JavaScript files. However, it only does this if you explicitly ask for it using "allowJs": true, "checkJs": true in your tsconfig.json or by adding a // @ts-check comment on top of your JS files. A // @ts-nocheck comment excludes a file from type checking. More information is available in the official TypeScript Handbook: Type Checking JavaScript Files.

Wotan respects these flags, too. That means it will not provide type information to rules executed on unchecked JS files. This ensures you won't get surprising lint findings caused by funky type inference in those files. You will still get reports for purely syntactic findings, i.e. rules that don't require type information.

Excluded Files

If type information is available Wotan excludes all files you haven't written yourself. The following files are always excluded so you cannot explicitly include them:

• any files of dependencies in node_modules (unless imported using a relative path, e.g. ./node_modules/foo/index)
• declaration files from @types (or typeRoots declared in your tsconfig.json)
• declaration files included by TypeScript, e.g. lib.es5.d.ts
• declaration files of project references (references in tsconfig.json)

This is the default behavior which can be overridden by plugin modules.

If you lint individual files without type information using the file's path or a glob pattern, you are responsible for excluding all files you don't want to lint.

Diagnosing Misbehavior

Catching bugs by just looking at an exception is hard. That's why Wotan produces debug output for certain events. You only need to enable it via environment variable DEBUG=wotan:* and run the previous command again. See the detailed documentation on how to use the wildcards.

License

Apache-2.0 © Klaus Meinhardt