@golevelup/nestjs-rabbitmq
Advanced tools
This module features an opinionated set of decorators for common RabbitMQ patterns including Publish/Subscribe and RPC using Rabbit's Direct Reply-To Queue for optimal performance.
It allows you to expose normal NestJS service methods as messaging handlers that can be configured to support a variety of messaging patterns.
NestJS offers an out of the box microservices experience with support for a variety of transports. However, because NestJS microservices strives to work with a variety of transport mechanisms in a generic way, it misses out on some of the powerful functionality offered by individual transport layers.
Some of the most notable missing functionality includes common messaging patterns like publish/subscribe and competing consumers.
In previous versions, this package did not support advanced connection management and if you tried to launch the app when a connection could not be established, an error was thrown and caused the app to crash.
Now, this package leverages amqp-connection-manager package to support connection resiliency.
NOTE: to maintain the same previous behavior and not introduce a major version update, the previous behavior is still the default.
If you want to transition to the new behavior and enable connection resiliency, you can configure connectionInitOptions to not wait for a connection to be available, for example:
import { RabbitMQModule } from '@golevelup/nestjs-rabbitmq';
@Module({
imports: [
RabbitMQModule.forRoot(RabbitMQModule, {
exchanges: [
{
name: 'exchange1',
type: 'topic',
},
],
uri: 'amqp://rabbitmq:rabbitmq@localhost:5672',
connectionInitOptions: { wait: false },
}),
],
})
export class RabbitExampleModule {}
With the new behavior in place, unavailability of a RabbitMQ broker still allows your application to bootstrap correctly and relevant channel setups take place whenever a connection can be established.
The same principle applies to when a connection is lost. In such cases, the module tries to reconnect and set up everything again once it is reconnected.
npm install ---save @golevelup/nestjs-rabbitmq
or
yarn add @golevelup/nestjs-rabbitmq
Import and add RabbitMQModule it to the imports array of module for which you would like to discover handlers. It may make sense for your application to do this in a shared module or to re-export it so it can be used across modules more easily. Refer to the NestJS docs on modules for more information.
If you are using exchanges, provide information about them to the module and they will be automatically asserted for you as part of initialization. If you don't, it's possible message passing will fail if an exchange is addressed that hasn't been created yet.
You can also optionally create your own channels which you consume messages from. If you don't create your own channels there will always be one created by default. You can also select which channel is default if you are creating your own. By setting prefetchCount for a particular channel you can manage message speeds of your various handlers on the same connection.
import { RabbitMQModule } from '@golevelup/nestjs-rabbitmq';
import { Module } from '@nestjs/common';
import { MessagingController } from './messaging/messaging.controller';
import { MessagingService } from './messaging/messaging.service';
@Module({
imports: [
RabbitMQModule.forRoot(RabbitMQModule, {
exchanges: [
{
name: 'exchange1',
type: 'topic',
},
],
uri: 'amqp://rabbitmq:rabbitmq@localhost:5672',
channels: {
'channel-1': {
prefetchCount: 15,
default: true,
},
'channel-2': {
prefetchCount: 2,
},
},
}),
RabbitExampleModule,
],
providers: [MessagingService],
controllers: [MessagingController],
})
export class RabbitExampleModule {}
This library is built using an underlying NestJS concept called External Contexts which allows for methods to be included in the NestJS lifecycle. This means that Guards, Interceptors and Filters (collectively known as "enhancers") can be used in conjunction with RabbitMQ message handlers. However, this can have unwanted/unintended consequences if you are using Global enhancers in your application as these will also apply to all RabbitMQ message handlers. If you were previously expecting all contexts to be HTTP contexts, you may need to add conditional logic to prevent your enhancers from applying to RabbitMQ message handlers.
You can identify RabbitMQ contexts by their context type, 'rmq':
@Injectable()
class ExampleInterceptor implements NestInterceptor {
intercept(context: ExecutionContext, next: CallHandler<any>) {
const contextType = context.getType<'http' | 'rmq'>();
// Do nothing if this is a RabbitMQ event
if (contextType === 'rmq') {
return next.handle();
}
// Execute custom interceptor logic for HTTP request/response
return next.handle();
}
}
There is also a utility function available called isRabbitContext which provides an alternative way to identify RabbitMQ contexts:
import { isRabbitContext } from '@golevelup/nestjs-rabbitmq';
@Injectable()
class ExampleInterceptor implements NestInterceptor {
intercept(context: ExecutionContext, next: CallHandler<any>) {
// Do nothing if this is a RabbitMQ event
if (isRabbitContext(context)) {
return next.handle();
}
// Execute custom interceptor logic for HTTP request/response
return next.handle();
}
}
To improve the migration process, it is possible to use NestJS controllers as handlers. WARNING: When using controllers, be aware that no HTTP context is available.
To enable the controller discovery the option enableControllerDiscovery has to be true.
import { RabbitMQModule } from '@golevelup/nestjs-rabbitmq';
import { Module } from '@nestjs/common';
import { MessagingController } from './messaging/messaging.controller';
import { MessagingService } from './messaging/messaging.service';
@Module({
imports: [
RabbitMQModule.forRoot(RabbitMQModule, {
exchanges: [
{
name: 'exchange1',
type: 'topic',
},
],
uri: 'amqp://rabbitmq:rabbitmq@localhost:5672',
enableControllerDiscovery: true,
}),
RabbitExampleModule,
],
providers: [MessagingService, MessagingController],
controllers: [MessagingController],
})
export class RabbitExampleModule {}
To use Interceptors, Guards or Pipes, the controller has to be imported as provider in the module. Then simply add the corresponding decorator to the whole controller or the method.
@RabbitRPC({
routingKey: 'intercepted-rpc-2',
exchange: 'exchange2',
queue: 'intercepted-rpc-2',
})
@UseInterceptors(TransformInterceptor)
interceptedRpc() {
return {
message: 42,
};
}
@RabbitRPC({
routingKey: 'intercepted-rpc-2',
exchange: 'exchange2',
queue: 'intercepted-rpc-2',
errorBehavior: MessageHandlerErrorBehavior.ACK,
errorHandler: ReplyErrorCallback,
})
@UsePipes(ValidationPipe)
interceptedRpc(@RabbitPayload() message:messageDto) {
return {
message: 42,
};
}
Simply apply the RabbitRPC decorator to a new or existing NestJS service class. When a message matching the exchange and routing key is received over RabbitMQ, the result of the Service method will be automatically sent back to the requester using the Direct Reply-To Queue.
import { RabbitRPC } from '@golevelup/nestjs-rabbitmq';
import { Injectable } from '@nestjs/common';
@Injectable()
export class MessagingService {
@RabbitRPC({
exchange: 'exchange1',
routingKey: 'rpc-route',
queue: 'rpc-queue',
})
public async rpcHandler(msg: {}) {
return {
response: 42,
};
}
}
Simply apply the RabbitSubscribe decorator to a new or existing NestJS service class. When a message matching the exchange and routing key is received over RabbitMQ, the service method will automatically be invoked with the message allowing it to be handled as necessary.
import { RabbitSubscribe } from '@golevelup/nestjs-rabbitmq';
import { Injectable } from '@nestjs/common';
@Injectable()
export class MessagingService {
@RabbitSubscribe({
exchange: 'exchange1',
routingKey: 'subscribe-route',
queue: 'subscribe-queue',
})
public async pubSubHandler(msg: {}) {
console.log(`Received message: ${JSON.stringify(msg)}`);
}
}
By default, messages are parsed with JSON.parse method when they are received and stringified with JSON.stringify on publish.
If you wish to change this behavior, you can use your own parsers, like so
import { RabbitMQModule } from '@golevelup/nestjs-rabbitmq';
import { Module } from '@nestjs/common';
import { MessagingController } from './messaging/messaging.controller';
import { MessagingService } from './messaging/messaging.service';
import { ConsumeMessage } from 'amqplib';
@Module({
imports: [
RabbitMQModule.forRoot(RabbitMQModule, {
// ...
deserializer: (message: Buffer, msg: ConsumeMessage) => {
const decodedMessage = myCustomDeserializer(
msg.toString(),
msg.properties.headers
);
return decodedMessage;
},
serializer: (msg: any) => {
const encodedMessage = myCustomSerializer(msg);
return Buffer.from(encodedMessage);
},
}),
],
// ...
})
export class RabbitExampleModule {}
Also, if you simply do not want to parse incoming message, set flag allowNonJsonMessages on consumer level, it will return raw message if unable to parse it
NestJS Plus provides sane defaults for message handling with automatic acking of messages that have been successfully processed by either RPC or PubSub handlers. However, there are situations where an application may want to Negatively Acknowledge (or Nack) a message. To support this, the library exposes the Nack object which when returned from a handler allows a developer to control the message handling behavior. Simply return a Nack instance to negatively acknowledge the message.
By default, messages that are Nacked will not be requeued. However, if you would like to requeue the message so that another handler has an opportunity to process it use the optional requeue constructor argument set to true.
import { RabbitRPC } from '@golevelup/nestjs-rabbitmq';
import { Injectable } from '@nestjs/common';
@Injectable()
export class MessagingService {
@RabbitRPC({
exchange: 'exchange1',
routingKey: 'rpc-route',
queue: 'rpc-queue'
})
public async rpcHandler(msg: {}) {
return {
if (someCondition) {
return 42;
} else if (requeueCondition) {
return new Nack(true);
} else {
// Will not be requeued
return new Nack();
}
};
}
}
In some scenarios, it may not be desirable for all running instances of a NestJS application to register RabbitMQ message handlers. For example, if leveraging the same application code base to expose API instances and worker roles separately it may be desirable to have only the worker instances attach handlers to manage queue subscriptions or RPC requests.
The default behavior is that handlers will be attached, but to opt out simply set the registerHandlers configuration option to false when registering the RabbitMQModule.
In some scenarios, it will be useful to get the original amqp message (to retrieve the fields, properties...).
The raw message is passed to the consumer as a second argument.
If the method signature of the consumer accepts amqplib.ConsumeMessage as a second argument, it enables to access all information that is available on the original message.
import { RabbitSubscribe } from '@golevelup/nestjs-rabbitmq';
import { Injectable } from '@nestjs/common';
import { ConsumeMessage } from 'amqplib';
@Injectable()
export class MessagingService {
@RabbitSubscribe({
exchange: 'exchange1',
routingKey: 'subscribe-route',
queue: 'subscribe-queue',
})
public async pubSubHandler(msg: {}, amqpMsg: ConsumeMessage) {
console.log(`Correlation id: ${amqpMsg.properties.correlationId}`);
}
}
You can optionally select channel which handler uses to consume messages from.
Set the queueOptions.channel to the name of the channel to enable this feature. If channel does not exist or you haven't specified one, it will use the default channel. For channel to exist it needs to be created in module config.
import { RabbitSubscribe, RabbitRPC } from '@golevelup/nestjs-rabbitmq';
import { Injectable } from '@nestjs/common';
@Injectable()
export class MessagingService {
@RabbitRPC({
exchange: 'exchange1',
routingKey: 'subscribe-route',
queue: 'subscribe-queue',
queueOptions: {
channel: 'channel-2',
},
})
public async rpcHandler(msg: {}) {
console.log(`Received rpc message: ${JSON.stringify(msg)}`);
return { message: 'hi' };
}
@RabbitSubscribe({
exchange: 'exchange1',
routingKey: 'subscribe-route-2',
queue: 'subscribe-queue-2',
})
public async pubSubHandler(msg: {}) {
console.log(`Received pub/sub message: ${JSON.stringify(msg)}`);
}
}
Messages can be presented as a batch to the handler. This works by accumulating messages on the consumer-side until either a batch size limit is reached or the batch timer expires. After handling, all messages in the batch will be acked (or nacked) automatically.
This behaviour is configured in the batchOptions property:
import { RabbitSubscribe } from '@golevelup/nestjs-rabbitmq';
const batchErrorHandler = (channel, messages, error) => {
console.log(`Received message batch of length: ${messages.length}`);
};
@Injectable()
export class MessagingService {
@RabbitSubscribe({
exchange: 'exchange1',
routingKey: 'batch-route',
queue: 'batch-queue',
batchOptions: {
size: 10,
timeout: 200,
errorHandler: batchErrorHandler,
},
})
public async batchHandler(messages) {
console.log(`Received message batch of length: ${messages.length}`);
}
}
An error handler may be provided here if your error handling logic needs to be aware of the batch, otherwise it will fall back to either the top-level errorHandler or the default error handling behaviour.
All RabbitMQ interactions go through the AmqpConnection object. Assuming you installed and configured the RabbitMQModule, the object can be obtained through Nest's dependency injection system. Simply require it as a constructor parameter in a Nest Controller or Service.
@Controller()
export class AppController {
constructor(private readonly amqpConnection: AmqpConnection) {}
...
}
If you just want to publish a message onto a RabbitMQ exchange, use the publish method of the AmqpConnection which has the following signature:
public publish(
exchange: string,
routingKey: string,
message: any,
options?: amqplib.Options.Publish
)
For example:
amqpConnection.publish('some-exchange', 'routing-key', { msg: 'hello world' });
If you'd like to request data from another RPC handler that's been set up using this library, you can use the request<T> method of the AmqpConnection.
For example:
const response = await amqpConnection.request<ExpectedReturnType>({
exchange: 'exchange1',
routingKey: 'rpc',
payload: {
request: 'val',
},
timeout: 10000, // optional timeout for how long the request
// should wait before failing if no response is received
});
The generic parameter used with the request method lets you specify the expected return type of the RPC response. This is useful for getting intellisense in your editor but no object validation of the actual received object is done on your behalf. This means that you are required to provide your own object validation logic if you need to make runtime guarantees about message structure
The RPC functionality included in @golevelup/nestjs-rabbitmq is based on the Direct Reply-To Queue functionality of RabbitMQ. It is possible that because of this, the client library (AmqpConnection.request) could be used to interact with an RPC server implemented using a different language or framework. However, this functionality has not been verified.
In a distributed system, transactions must be correlated by an X-Correlation-ID. You can use the X-Request-ID in the header to separate sub-requests that are contained in the main request chain.
// To create a transaction in the distributed system,
// multiple request correlated by an correlationId
const correlationId = randomUUID();
const response = await amqpConnection.request<ExpectedReturnType>({
exchange: 'exchange1',
routingKey: 'rpc',
correlationId,
// Each request in the transaction has its own requestId
headers: { 'X-Request-ID': randomUUID() },
payload: {
request: 'val',
},
});
The competing consumer pattern is useful when building decoupled applications especially when it comes to things like RPC or Work Queues. In these scenarios, it often desirable to ensure that only one handler processes a given message especially if your app is horizontally scaled.
In the previous examples, both RPC and Pub/Sub would be using the Competing Consumer pattern by default through the use of a named queue parameter. If running multiple instances of the application, each instance would bind to the same named queue and receive the messages in a round robin fashion.
If you don't want this behavior, simply don't provide a queue name. A unique one will be generated automatically and all instances of the handler will receive their own copy of the message.
Important RPC behavior has not been tested without the use of a named queue as this would cause multiple messages to potentially be sent back in response to a single request. If you're using RPC it is highly recommended that you specify a named queue. The API may be updated in the future to specifically require this.
import { RabbitSubscribe } from '@golevelup/nestjs-rabbitmq';
import { Injectable } from '@nestjs/common';
@Injectable()
export class MessagingService {
@RabbitSubscribe({
exchange: 'exchange1',
routingKey: 'subscribe-route1',
queue: 'subscribe-queue',
})
public async competingPubSubHandler(msg: {}) {
console.log(`Received message: ${JSON.stringify(msg)}`);
}
@RabbitSubscribe({
exchange: 'exchange1',
routingKey: 'subscribe-route2',
})
public async messagePerInstanceHandler(msg: {}) {
console.log(`Received message: ${JSON.stringify(msg)}`);
}
}
By default, the library tries to do its best to give you the control on errors if you want and to do something sensible by default.
This is done with the errorHandler property that is available both in RPC and RabbitSubscribe.
@RabbitSubscribe({
exchange: 'exchange1',
routingKey: 'subscribe-route1',
queue: 'subscribe-queue',
errorHandler: myErrorHandler
})
it should be used with
rpcOptionsfor RPC
The default is defaultNackErrorHandler and it just nack the message without requeue (which is usually ok to avoid the message coming back in the queue again and again)
However, you can do more fancy stuff like inspecting the message properties to decide to requeue or not. Be aware that you should not requeue indefinitely...
Please note that nack will trigger the dead-letter mechanism of RabbitMQ (and so, you can use the deadLetterExchange in the queueOptions in order to send the message somewhere else).
A complete error handling strategy for RabbitMQ is out of the scope of this library.
Similarly to message errors, the library provide an error handler for failures during a queue creation (more exactly, during the assertQueue operation which will create the queue if it does not exist).
@RabbitSubscribe({
exchange: 'exchange1',
routingKey: 'subscribe-route1',
queue: 'subscribe-queue',
assertQueueErrorHandler: myErrorHandler
})
The default is defaultAssertQueueErrorHandler which just rethrows the RabbitMq error (because there is no "one size fits all" for this situation).
You have the option to use forceDeleteAssertQueueErrorHandler which will try to delete the queue and recreate it with the provided queueOptions (if any)
Obviously, you can also provide your own function and do whatever is best for you, in this case the function must return the name of the created queue.
Normally, you would not want to setup a RabbitMq broker locally or even connect to a external one during tests. So, first we have to prevent the connection to be attempted. This can be easily achieved by passing an undefined config to RabbitMQModule.forRoot:
import { RabbitMQModule } from '@golevelup/nestjs-rabbitmq';
@Module({
imports: [
RabbitMQModule.forRoot(
RabbitMQModule,
/** Not sending config object makes the connection process to be ignored */
process.env.NODE_ENV !== 'test'
? {
exchanges: [
{
name: 'exchange1',
type: 'topic',
},
],
uri: 'amqp://rabbitmq:rabbitmq@localhost:5672',
connectionInitOptions: { wait: false },
}
: undefined
),
],
})
export class RabbitExampleModule {}
In this example, when running on a test environment, config will be undefined thus connection will no happen.
You saw above how to prevent the connection during test, but now we'll have also to mock the RabbitExampleModule so it exports AmqpConnection to our publishers (we do not worry about the subscribers because they will be ignored along with the connection).
// In your test setup...
import { Module } from '@nestjs/common';
import { AmqpConnection } from '@golevelup/nestjs-rabbitmq';
import { createMock } from '@golevelup/ts-jest';
import { Test } from '@nestjs/testing';
import { AppModule } from 'where your root module is located';
import { RabbitExampleModule } from 'where your rabbitmq module is located';
// Create a valid mock module
@Module({
providers: [
{
provide: AmqpConnection,
useValue: createMock<AmqpConnection>(),
},
],
exports: [AmqpConnection],
})
class MockRabbitExampleModule {}
// Then override the real `RabbitMqModule` with the mocked one
beforeAll(async () => {
const moduleFixture = await Test.createTestingModule({
imports: [AppModule],
})
.overrideModule(RabbitExampleModule)
.useModule(MockRabbitExampleModule)
.compile();
const app = moduleFixture.createNestApplication();
await app.init();
});
And now your publishers that inject AmqpConnection will find it very well mocked.
Contributions welcome! Read the contribution guidelines first.
FAQs
Badass RabbitMQ addons for NestJS
The npm package @golevelup/nestjs-rabbitmq receives a total of 73,939 weekly downloads. As such, @golevelup/nestjs-rabbitmq popularity was classified as popular.
We found that @golevelup/nestjs-rabbitmq demonstrated a healthy version release cadence and project activity because the last version was released less than a year ago. It has 3 open source maintainers collaborating on the project.
Did you know?
Socket for GitHub automatically highlights issues in each pull request and monitors the health of all your open source dependencies. Discover the contents of your packages and block harmful activity before you install or update your dependencies.
Security News
PyPI confirms no security flaws were exploited in the Ultralytics supply chain attack and highlights improvements for safer package publishing.
Security News
Research
The Socket Research Team breaks down a malicious wrapper package that uses obfuscation to harvest credentials and exfiltrate sensitive data.
Research
Security News
Attackers used a malicious npm package typosquatting a popular ESLint plugin to steal sensitive data, execute commands, and exploit developer systems.