@tbowmo/node-red-small-timer
Advanced tools
Small timer node for Node-RED with support for sunrise, sunset etc. timers
A Node-RED timer node to rule them all. It delivers either an on or off message at scheduled intervals. These intervals can be consistent daily occurrences, like '19:00' for 'on' and '23:00' for 'off', perfect for controlling f.ex. a porch light. However, its true power lies in its ability to activate the light at, let's say sunset and deactivate it at dusk. Pretty cool, right?
This encapsulates the core concept: Emit a predefined message at either specific times, or on sunrise / sunset. Garnish this with a powerful day schedule configuration, and you have a small timer for your lights, or other things that needs to be turned on or off daily.
Either use the palette manager in Node-RED to install the plugin, or use a terminal to install directly in your local installation of Node-RED:
npm install @tbowmo/node-red-small-timer
Once installed, restart your node-red server, and you will have a set of new nodes available in your palette under timers.
Start by configuring a position, this is used to calculate the correct sunrise/sunset times for your area. You can either let your browser do it by pressing the button "Get position from browser" or use other means like Google Maps to find the latitude/longitude for your area.
Configures the on and off events
Set this property to the desired on / off time for the day. Can be a specific time, or use a dynamic time such as sunrise, sunset etc.
Note! the timestamps shown under "Dynamic sun and moon times" is calculated on the fly, by the suncalc library, and are shown for the location chosen and current time of year. The actual time used by small timer will be re-calculated regularly, if one of these event times are chosen
When using a dynamic time, you can add an offset to the calculated time. Use it for example to turn the light on 30 minutes before sunrise.
Used when triggering an override of the current state, after set time the node will switch back to whatever the output state should be at the given time, if it was in auto mode. This value is split into an on and off timeout. This means that you could have an 5 minutes on timeout (for turning on lights momentarily) while keeping off at default timeout which is 24 hours (or until next state change)
This can be used to set a minimum required 'on time'. If the calculated 'on time' is less than this value, the event will be ignored. For example, if you are using sunset to turn on lights in the evening with a fixed off time, you might not be interested in turning on the light for only 5 minutes. This can be prevented by setting a minimum 'on time' here.
This is used to determine which days the timer should or should not operate.
== is include, this specifies days where the rule should run
!= is exclude, this specifies days where the rule does not run.
Note that if the state is turned on by auto state, it will also run at the off time, even if the day is excluded (ie, if the off time is after midnight and the day is excluded).
The rules are read and executed one by one, it is the outcome after the last rule has been read, that defines if the day is included or excluded
If the node is turned on on a "do not run day", temporary on is used, and output will be turned off after set timeout
Default logic state is that the timer is disabled, so you need at least one rule that turns it on (==).
Note that the weeks numbers are calculated according to ISO8601, which means that weeks start on mondays.
Run on every day, except thursdays in July
Run on mondays in odd weeks, except all of December
Run on mondays in June
Topic parameter of the msg that is sent out on events. This can be used to send on to mqtt for example.
Payload of the output message is set to this value during on, can be set to json, number, string, or boolean
Payload of the output message is set to this value during off, can be set to json, number, string, or boolean
Wrap midnight: Will wrap on time around midnight, if on time is 23:00 and off time is 02:00, checking this will turn on before midnight, and off after. If unchecked, it will be ignored. This is particularly useful if you have a fixed on time at 06:00 in the morning, and a dynamic off time tracking sunrise, when the sunrise is before 06:00 you might not want it to turn on the porch light, and thus it should not wrap midnight.
Emit on startup: Configures the node to emit a message 2 seconds after startup / redeploy of your node red flow.
Debug enable: This will add an extra output to the node providing debug information, like the different sunrise/sunset etc. times (see debug section below)
Repeat: Enables the node to repeat status messages with the specified interval (in seconds). If disabled the node will only emit a message when its state changes.
By default the node has a single output, which provides the following object:
{
trigger: 'input' | 'timer',
autoState: boolean,
timeout: number,
temporaryManual: boolean,
duration: number,
stamp: number,
state: string,
payload: object, string, number // as setup in the node
topic: string // (as setup in the node)
}
| property | description |
|---|---|
| trigger | if the output is triggered by an input message, then this property is set to "input" otherwise it is set to "timer" |
| autoState | will be true whenever the node is running in auto mode |
| timeout | indicates how long there is until the node will return to auto state, when in temporary override |
| temporaryManual | Will be true when the node is in temporary override |
| duration | time until next on, or off, event happens |
| state | will be one of auto, tempOn or tempOff |
| stamp | current unix timestamp (since epoch) |
The input of the node takes a few commands in the payload property of the message sent to small timer, these are completely optional and not needed for normal operation, but can be used to turn the output temporary on or off.
| payload | description |
|---|---|
| 1 / on | Turns the output temporarily on |
| 0 / off | Turns the output temporarily off |
| auto / default | Sets the node back to autostate, and outputs whatever the autostate would be (on/off) |
| sync | Emits the current state on the output |
Using the temporary on/off feature will emit the respective on/off message on the output. Simultaneously, it will start an internal timer with the value from the timeout configuration option. When this timer runs out, the node will resume auto mode.
Note that if you do a temporary on/off to the same state that the auto mode will be in, then the node will return to auto state.
Sending an auto/default payload will cause it to return to auto mode (if it was in a temporary on/off state earlier), and emit the new state if so required
NOTE: If the input payload property contains non-decodable properties/strings, the input will be ignored, and an error will be emitted to Node-RED.
| property | type | description |
|---|---|---|
| reset | boolean | If this property resolves to a truthy value, the node will be reset to auto mode (Works like auto/default payload) |
| timeout | number | This can be used to override the timeout set in the configuration, and applies to the current on or off command. If left out / undefined, the configured timeout will be used |
When debug is enabled, the node will have a secondary output, which emits data from the suncalc calculations for sunrise/sunset, etc. This data will be emitted at the same time as the main output is emitted (at changes, or when sync is sent to the input).
The debug output will contain the following data
{
override: 'tempOn' | 'tempOff' | 'auto',
topic: 'debug'
sunTimes: {
dawn: number,
dusk: number,
solarNoon: number,
sunrise: number,
sunset: number,
night: number,
nightEnd: number,
},
moonTimes: {
rise: number,
set: number,
},
now: number,
actualStart: number,
actualEnd: number,
nextStart: number,
nextEnd: number,
onState: boolean,
operationToday: 'normal' | 'noMidnightWrap' | 'minimumOnTimeNotMet',
}
All the above numbers will represent the number of minutes since midnight on the day the event happens, except for nextStart and nextEnd, which will indicate the number of minutes until the next event.
The debug object can be extended with new properties in future releases that might not be fully described here.
SmallTimer was originally inspired by BigTimer, which, in my opinion, has a somewhat overwhelming editor UI with numerous checkboxes. This inspired the creation of SmallTimer, aiming for a simpler approach to the editor UI. SmallTimer is a complete rewrite from scratch, utilizing modern TypeScript and unit tests to ensure the core functionality works during development.
FAQs
Small timer node for Node-RED with support for sunrise, sunset etc. timers
We found that @tbowmo/node-red-small-timer demonstrated a healthy version release cadence and project activity because the last version was released less than a year ago. It has 0 open source maintainers collaborating on the project.
Did you know?
Socket for GitHub automatically highlights issues in each pull request and monitors the health of all your open source dependencies. Discover the contents of your packages and block harmful activity before you install or update your dependencies.
Security News
Research
Socket's threat research team has detected five malicious npm packages targeting Roblox developers, deploying malware to steal credentials and personal data.
Security News
vlt introduced its new package manager and a serverless registry this week, innovating in a space where npm has stagnated.
Security News
Research
The Socket Research Team uncovered a malicious Python package typosquatting the popular 'fabric' SSH library, silently exfiltrating AWS credentials from unsuspecting developers.