apimocker

apimocker

This is a node.js module to run a simple http server, which can serve up mock service responses. Responses can be JSON or XML to simulate REST or SOAP services. Access-Control HTTP Headers are set by default to allow CORS requests. Mock services are configured in the config.json file, or on the fly, to allow for easy functional testing. Using apimocker, you can develop your web or mobile app with no dependency on back end services. (There are lots of these projects out there, but I wrote this one to support all kinds of responses, to allow on-the-fly configuration, and to run in node.)

Installation

	sudo npm install -g apimocker

That will install globally, and allow for easier usage. (On Windows, you don't need "sudo".)

Usage

    apimocker [-c, --config \<path\>] [-q, --quiet] [-p \<port\>]

Out of the box, you can just run "apimocker" with no arguments. (Except on windows, you'll need to edit config.json first. See below.)

Then you can visit "http://localhost:7878/first" in your browser to see it work. The quiet and port options can also be set in the config.json file, and values from config.json will override values from the command line. After you get up and running, you should put your config.json and mock responses in a better location. It's not a good idea to keep them under the "node_modules" directory. Make sure another process is not already using the port you want. If you want port 80, you may need to use "sudo" on Mac OSX.

With Grunt

If you're using Grunt for your project, there's a grunt plugin you can use to start up apimocker: https://github.com/gstroup/grunt-apimocker

Windows note

After installing from npm, you'll need to edit this file: /Users/xxxxx/AppData/Roaming/npm/node_modules/apimocker/config.json Change the "mockDirectory" to point to this location. (Or another location where you put the mock responses.) mockDirectory: /Users/xxxxx/AppData/Roaming/npm/node_modules/apimocker/samplemocks

Help

    apimocker -h

Configuration

On startup, config values are loaded from the config.json file. During runtime, mock services can be configured on the fly. See the sample config.json file in this package.

• Services can be configured to return different responses, depending on a request parameter.
• Content-type for a service response can be set for each service. If not set, content-type defaults to application/xml for .xml files, and application/json for .json files.
• HTTP Status code can be set for each service.
• Latency (ms) can be set to simulate slow service responses. Latency can be set for a single service, or globally for all services.
• Allowed domains can be set to restrict CORS requests to certain domains.
• Allowed headers can be set. (Default is to set "access-control-allow-headers: Content-Type" if not specified in config file.)
• config.json file format has changed with the 0.1.6 release. See below for the new format. (Old config.json file format is deprecated and doesn't support new features, but still functioning.)
• mockDirectory value should be an absolute path.
• A static route can be opened up to serve up static assets like images. Both staticDirectory and staticPath must be set. If either is not set, then nothing happens.

{
  "note": "This is a sample config file. You should change the mockDirectory to a more reasonable path.",
  "mockDirectory": "/usr/local/lib/node_modules/apimocker/samplemocks/",
  "staticDirectory": "/optional/file/system/path/to/static/directory",
  "staticPath": "/optional/web/path/to/static/directory",
  "quiet": false,
  "port": "7878",
  "latency": 50,
  "allowedDomains": ["abc.com"],
  "allowedHeaders": ["Content-Type", "my-custom-header"],
  "webServices": {
    "first": {
      "mockFile": "king.json",
      "latency": 20,
      "verbs": ["get"]
    },
    "second": {
      "verbs": ["delete", "post"],
      "responses": {
        "delete": {"httpStatus": 204},
        "post": {
          "contentType": "foobar",
          "mockFile": "king.json"
        }
      }
    },
	"nested/ace": {
      "mockFile": "ace.json",
      "verbs": ["post", "get"],
      "switch": "customerId"
    },
	"nested/ace2": {
      "mockFile": "ace.json",
      "verbs": ["post", "get"],
      "switch": ["customerId","multitest"]
    },
    "var/:id": {
      "mockFile": "xml/queen.xml",
      "verbs": ["all"],
      "switch": "id"
    }
  }
}

The most interesting part of the configuration file is the webServices section. This section contains a JSON object describing each service. The key for each service object is the service URL (endpoint.) Inside each service object, the "mockFile" and "verbs" are required. "latency" and "contentType" are optional. For instance, a GET request sent to "http://server:port/first" will return the king.json file from the samplemocks directory, with a 20 ms delay. If you'd like to return different responses for a single URL with different HTTP verbs ("get", "post", etc) then you'll need to add the "responses" object. See above for the "second" service. The "responses" object should contain keys for the HTTP verbs, and values describing the response for each verb.

Switch response based on request parameter

In your configuration, you can set up a "switch" parameter for each service. If set, apimocker will check the request for this parameter, and return a different file based on the value. For instance, if you set up a switch as seen above for "nested/ace", then you can will get different responses based on the request sent to apimocker. A JSON POST request to the URL "http://localhost:7878/nested/ace" with this data:

{
  "customerId": 1234
}

will return data from the mock file called "customerId1234.ace.json". Switch values can also be passed in as query parameters: http://localhost:7878/nested/ace?customerId=1234 or as part of the URL, if you have configured your service to handle variables, like the "var/:id" service above: http://localhost:7878/var/789 If the specific file, such as "customerId1234.ace.json" is not found, then apimocker will attempt to return the base file: "ace.json".

You can now also define an array of values to switch on. Given the configuration in "ace2", a request to "nested/ace2" containing:

{
  "multitest": "abc",
  "customerId": 1234
}

will return data from the mock file called "customerId1234multitestabc.ace.json". Note that when using multiple switches, the filename must have parameters in the same order as configured in the "switch" setting in config.json. Also, apimocker will look for the filename that matches ALL the request parameters. If one does not match, then the base file will be returned.

Runtime configuration

After starting apimocker, mocks can be configured using a simple http api. This http api can be called easily from your functional tests, to test your code's handling of different responses.

/admin/setMock

This allows you to set a different response for a single service at any time by sending an http request. Request can be a post containing a JSON object in the body:

{
	"verb":"get",
	"serviceUrl":"third",
	"mockFile":"queen.xml",
    "latency": 100,
    "contentType": "anythingyouwant"
}

or a get with query string parameters: localhost:7878/admin/setMock?verb=get&serviceUrl=second&mockFile=ace.json

/admin/reload

If the config.json file is edited, you can send an http request to /admin/reload to pick up the changes.

Versions

0.3.2

Added support for multiple switch parameters on a single URL. Thanks @skjegg and @snyoz !

0.3.1

Added support for a static path. (see issue #9)

0.3.0

Refactored and updated to use Express 4.5. (No functional change.)

0.2.4

Allows configuration of the "access-control-allow-headers" HTTP header.

0.2.3

Now allows HTTP status code to be set for each response. Config file format also allows configuration of different responses based on http verb.

0.1.8

New "switch" feature added, allowing different responses based on a request parameter.

0.1.6

New config file format was introduced, allowing for custom content-types and more fine grained control over services.

Contributors

Run "grunt watch" in the root "apimocker" directory to start the grunt watch task. This will run JSHint and mocha tests.

Acknowledgements

Big thanks to magalhas for his httpd-mock project. This gave me a great starting point. Also thanks to clafonta and the Mockey project for inspiration.

Changelog

0.3.2

Added support for multiple switch parameters on a single URL. Thanks @skjegg and @snyoz !