browser-with-fingerprints

browser-with-fingerprints

This is the repo for browser-with-fingerprints, a plugin for automation frameworks that allows you to change a browser fingerprint, generate a virtual identity and improve your browser's stealth.

In order to achieve this, the FingerprintSwitcher service is used, which allows you to replace a list of important browser properties, and thus you will act like a completely new user.

This package is the basis for other plugins and doesn't allow you to automate browser actions directly. It's needed primarily for the implementation of other plugins for various frameworks.

Warning: plugin is still in beta stage, it means that bugs may happen, including critical.

Current supported engine version - 111.0.5563.65.

About

This library allows you to change browser fingerprint and use any automation framework with enhanced anonymity. In order to migrate and use it, a minimum of modifications and code changes is required.

Browser fingerprinting - is a technique that allows to identify the user by a combination of browser properties, such as - fonts, resolution, list of plugins, navigator properties, etc. By adding new factors and using browser API in a special way, a site can determine exactly which user is visiting it, even if the user is using a proxy. When using this package and replacing fingerprints, websites will not be able to identify you from other users, as all these properties and results of API calls will be replaced with values from real devices.

Let's look at a small example of WebGL property substitution. In the screenshot below, the left column shows the values from the regular browser, and the right column shows the values substituted using ready-made fingerprints. This result cannot be achieved using only the replacement of various browser properties via JavaScript, that's what this plugin and service is for:

You can learn more by following this link.

Installation

To use this plugin in your project, install it with your favorite package manager:

npm i browser-with-fingerprints
# or
pnpm i browser-with-fingerprints
# or
yarn add browser-with-fingerprints

Please note that according to the architecture section, this plugin can only be installed and used on Windows operating system.

Other plugins

You can use this package directly to launch browsers and write your own plugins. But it's much better to use ready-made plugins for popular automation frameworks:

• Plugin for selenium - selenium-with-fingerprints
• Plugin for puppeteer - puppeteer-with-fingerprints
• Plugin for playwright - playwright-with-fingerprints

These plugins are already configured to integrate with each specific library, and have a convenient API to work with. They aren't a complete replacement for automation frameworks, but only extend their functionality.

To launch the browser, the most compatible API is used, copying the options of the original libraries so that it's easy to add new code to your project. You can find detailed information in the corresponding repositories.

When using plugins, don't forget about dependencies. Libraries do not install dependencies directly, they are listed as optional to make things easier for you. Also be aware of the possible need for additional packages or programs - for example, the chromedriver executable for the selenium-webdriver package, and so on.

Launching the browser

You can launch the browser in two different ways. There are two methods for this - launch and spawn.

The first one uses the native launcher of the library, the integration with which is implemented in a specific plugin. This does not apply to the base library and this method cannot be used with it.

The launch method uses the framework's built-in methods to launch the browser under the hood and, accordingly, accepts the same options. The only difference is the presence of additional code inside the plugin that applies the fingerprint and proxy. The sample code may look something like this:

const browser = await plugin.launch({
  args: ['--mute-audio'],
  headless: true,
});

The spawn method works in a similar way, but uses a separate mechanism to launch the browser. The main difference is that this method just starts the process, but doesn't connect to it for automation - you can do it yourself later.

This method returns a running browser instance that can be used to connect via CDP or via the desired automation framework:

const { plugin } = require('browser-with-fingerprints');

const chrome = await plugin.spawn({ headless: true });

// Pseudocode for setting up a
// connection using the debugging port.
await framework.connect({ debuggingPort: chrome.port });

// Pseudocode for setting up a
// connection using the websocket url.
await framework.connect({ websocketUrl: chrome.url });

// The best way to close the browser
// is to use the framework methods.
await chrome.close();

At this link you can find a detailed description of all the options allowed for spawn method. The same goes for the return type declaration, details of which can be found here.

If possible, use it only in extreme cases. It is much more convenient to use the launch method to launch the browser, which minimizes the number of steps for proper initialization and configuration.

Annotations are described for all plugins methods directly in the library code via the TypeScript declarations, so when using it you will be able to see hints for all options and types. You can also find out about it directly here.

Configuring browser

In order to change the fingerprint and proxy for your browser, you should use special separate methods:

• useProxy - to change the proxy configuration.
• useFingerprint - to change the fingerprint configuration.

These methods directly affect only the next launch of the browser. So you should always use them before using the spawn plugin method.

You cannot change the settings once the browser is launched - more specifically, an already launched instance will not be affected by the new configuration. But you can safely change the options for the next run, or for a separate browser instance with a different unique configuration.

You can also chain calls, since both methods return the current plugin instance. It does not matter in which order the settings will be applied. It might look like this:

const { plugin } = require('browser-with-fingerprints');

const fingerprint = await plugin.fetch('', {
  tags: ['Microsoft Windows', 'Chrome'],
});

plugin.useProxy('127.0.0.1:8080').useFingerprint(fingerprint);

Use these links to see a detailed description of the methods:

• This one for the useFingerprint method (also see additional options here).
• This one for the useProxy method (also see additional options here).

The usage of these methods is very similar - they both take two parameters, the first of which is the configuration data itself, and the second is additional options. The fingerprint and proxy will not be changed unless the appropriate method is used. In this case, all settings related to browser fingerprinting will remain at their original values.

Fingerprint and proxy aren't applied instantly when calling methods. Instead, the configuration is saved and used directly when the browser is launched using the launch or spawn methods. Thus, you can pre-configure the plugin in a certain way, or change something immediately before launching the browser.

Fingerprint usage

In order to change the fingerprint, you need to run the useFingerprint method before starting the browser, i.e. before using the plugin's launch method.

The useFingerprint method takes two parameters. The first is a string with fingerprint data that you can request from the service. The second is additional options for applying a fingerprint, most of which are applied automatically - for example, the safe replacement of the BatteryAPI and AudioAPI properties:

const { plugin } = require('browser-with-fingerprints');

const fingerprint = await plugin.fetch('', {
  tags: ['Microsoft Windows', 'Chrome'],
});

plugin.useFingerprint(fingerprint, {
  // It's disabled by default.
  safeElementSize: true,
  // It's enabled by default.
  safeBattery: false,
});

In order to obtain fingerprints you should use the fetch plugin method. Pass the service key as the first argument and additional parameters as the second, if necessary:

const { plugin } = require('browser-with-fingerprints');

const fingerprint = await plugin.fetch('SERVICE_KEY', {
  tags: ['Microsoft Windows', 'Chrome'],
  // Fetch fingerprints only with a browser version higher than 98:
  minBrowserVersion: 98,
  // Fetch fingerprints only collected in the last 15 days:
  timeLimit: '15 days',
});

All possible settings for fetch method, as well as their descriptions, you can find here.

You can reuse fingerprints instead of requesting new ones each time. To do this, you can save them to a file or to a database - use any option convenient for you. In this way, you can speed up the process of launching the browser with the parameters you need, organize your storage, filter and sort fingerprints locally, and much more:

const { readFile, writeFile } = require('fs/promises');
const { plugin } = require('browser-with-fingerprints');

// Save the fingerprint to a file:
const fingerprint = await plugin.fetch('', {
  tags: ['Microsoft Windows', 'Chrome'],
});
await writeFile('fingerprint.json', fingerprint);

// Load fingerprint from file at next run:
plugin.useFingerprint(await readFile('fingerprint.json', 'utf8'));

You can learn more about the options directly when adding these methods - just use the built-in annotations.

You can use any tags, filters (e.g. time limit) and settings if you have a service key.

If you specify an empty string as the first argument, the free version will be used. For a free version you won't be able to use other tags than the default ones, as well as some other filters:

const fingerprint = await plugin.fetch('', {
  // You can only use these tags with the free version:
  tags: ['Microsoft Windows', 'Chrome'],
  // You also cannot use such filters in the free version:
  // minBrowserVersion: 105,
});

In the free version, the PerfectCanvas technology is also not available. There are other limitations when using the free version - for example, limiting the number of requests in a certain period of time. To see the differences and limits of different versions, visit this website.

You can buy a key here to avoid limitations.

Proxy usage

In order to set up a proxy, you should use the useProxy method. The first parameter of this method is a string with information about the proxy. The second parameter is additional options that will be applied to the browser, for example, automatic change of language and time zone:

const { plugin } = require('browser-with-fingerprints');

plugin.useProxy('127.0.0.1:8080', {
  // Change browser timezone according to proxy:
  changeTimezone: true,
  // Replace browser geolocation according to proxy:
  changeGeolocation: true,
});

You can learn more about the parameters and additional options for this method here and here.

The browser supports two types of proxies - https and socks5. It is better to always specify the proxy type in the address line - otherwise, https will be used by default.

You can use aliases - http instead of https and socks instead of socks5. Proxies with authorization (with login and password) are also supported.

In general, when specifying addresses, you can use many different formats, for example:

• 127.0.0.1:8080
• https://127.0.0.1:8080
• socks5://127.0.0.1:8181
• username:password@127.0.0.1:8080
• socks:127.0.0.1:8080:username:password
• https://username:password:127.0.0.1:8080

In order to preserve compatibility with the original library syntax, the proxy can be obtained from the arguments you specified. The proxy-server option will be used as the value, and all other options will be set to their default values. But this will be done only if you didn't call the appropriate method for the proxy configuration:

const { plugin } = require('browser-with-fingerprints');

const browser = await plugin.spawn({
  // The syntax for specifying an argument value
  // is exactly the same as for using a separate method.
  args: ['--proxy-server=https://127.0.0.1:8080'],
});

It's better to replace such code with the useProxy method. This is much more convenient because you can immediately set the additional options you need.

More info

If you want to learn more about fingerprint substitution technology, explore the list of replaceable properties and various options, such as tags, get or configure your service key, use this link. There you can also get a test fingerprint and see ready-made values that can be applied to your browser.

Architecture

This plugin uses the FingerprintSwitcher service to get fingerprints. The resulting fingerprints are used later directly when working with the browser and are applied in a special way using a custom configuration files.

Also keep in mind that this package only work on the Windows operating system. This is a forced measure due to the presence of some critical Windows-only dependencies without which this implementation will not work. If you install or run it on other platforms, you will get the corresponding errors.

There are some limitations in using the package, which may be critical or non-critical depending on your task. For example, for the correct operation of the fingerprint substitution technology, a custom browser with various patches is required. It will be used automatically when working with this package.

The plugin architecture can be summarized as the following diagram:

All packages can only work with the Chrome browser, which comes bundled with the libraries and loads automatically. The path to the executable file is defined on the plugin side and cannot be changed. It means that you will not be able to use not only other versions of Chrome or Chromium, but also other browser engines. The same goes for some framework-specific launch options.

Limitations

Please note that there are some restrictions at the moment:

• Only Windows operating system is supported.
• Parallel launch of browsers is synchronized between calls.
• Working with workers is possible only when specifying separate FINGERPRINT_CWD for each worker.

Also, there is no guarantee that each of these items will be changed in the future.

Alternatives

Also check out BAS - a great alternative to automate the Chrome browser without programming skills. It also supports fingerprint substitution, has simple and powerful multithreading and other advantages.

Troubleshooting

If you encounter any issue or bug, please use the issues section of the repository.

Please describe the problem in as much detail as possible when creating tickets - indicate the sequence of actions (steps) to repeat the problem, error output, and so on.

If the code is large, attach it as files or use sandboxes. At the same time, it's better to remove from it areas that do not relate to the problem - it will be much easier to figure it out. Format your code and wrap it in special markdown tags if you're adding it to an issue report, for example:

// your code

Please be careful not to attach various secrets in your code or screenshots - for example, fingerprint service keys, account passwords, and so on. In the case of service keys, this can lead to their blocking without a refund.

If the recommendations are not followed, your ticket may be ignored.

Testing

The excellent mocha framework is used for tests in this library. Use the command line or ready-made scripts if you want to run them yourself.

In order to test getting fingerprints from the service (as well as premium functionality), set the FINGERPRINT_KEY environment variable:

FINGERPRINT_KEY="VALUE"

This variable will be used when calling the fetch method. You can also use the FINGERPRINT_CWD environment variable to specify the directory where the engine will be stored, for example:

FINGERPRINT_CWD="../plugin-engine"

You can define it in any way convenient for you, but by default variables are read from the env files using the dotenv library.

License

Copyright © 2023, CheshireCaat. Released under the MIT license.