A Node.js BLE (Bluetooth Low Energy) central module.
Want to implement a peripheral? Checkout bleno
Note: macOS / Mac OS X, Linux, FreeBSD and Windows are currently the only supported OSes. Other platforms may be developed later on.
libbluetooth-devsudo apt-get install bluetooth bluez libbluetooth-dev libudev-dev
Make sure node is on your path, if it's not, some options:
nodejs to node: sudo ln -s /usr/bin/nodejs /usr/bin/nodesudo yum install bluez bluez-libs bluez-libs-devel
See Configure Intel Edison for Bluetooth LE (Smart) Development
Make sure you have GNU Make:
sudo pkg install gmake
Disable automatic loading of the default Bluetooth stack by putting no-ubt.conf into /usr/local/etc/devd/no-ubt.conf and restarting devd (sudo service devd restart).
Unload ng_ubt kernel module if already loaded:
sudo kldunload ng_ubt
Make sure you have read and write permissions on the /dev/usb/* device that corresponds to your Bluetooth adapter.
node-gyp requirements for Windows
Install the required tools and configurations using Microsoft's windows-build-tools from an elevated PowerShell or cmd.exe (run as Administrator).
npm install --global --production windows-build-tools
node-bluetooth-hci-socket prerequisites
See @don's set up guide on Bluetooth LE with Node.js and Noble on Windows
This limit is imposed upon by the Bluetooth adapter hardware as well as it's firmware.
| Platform | |
|---|---|
| OS X 10.11 (El Capitan) | 6 |
| Linux/Windows - Adapter dependent | 5 (CSR based adapter) |
Some BLE adapters cannot connect to a peripheral while they are scanning (examples below). You will get the following messages when trying to connect :
Sena UD-100 (Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)) : Error: Command disallowed
Intel Dual Band Wireless-AC 7260 (Intel Corporation Wireless 7260 (rev 73)) : Error: Connection Rejected due to Limited Resources (0xd)
You need to stop scanning before trying to connect in order to solve this issue.
npm install noble
var noble = require('noble');
noble.startScanning(); // any service UUID, no duplicates
noble.startScanning([], true); // any service UUID, allow duplicates
var serviceUUIDs = ["<service UUID 1>", ...]; // default: [] => all
var allowDuplicates = <false|true>; // default: false
noble.startScanning(serviceUUIDs, allowDuplicates[, callback(error)]); // particular UUID's
NOTE: noble.state must be poweredOn before scanning is started. noble.on('stateChange', callback(state)); can be used register for state change events.
noble.stopScanning();
peripheral.connect([callback(error)]);
peripheral.disconnect([callback(error)]);
peripheral.updateRssi([callback(error, rssi)]);
peripheral.discoverServices(); // any service UUID
var serviceUUIDs = ["<service UUID 1>", ...];
peripheral.discoverServices(serviceUUIDs[, callback(error, services)]); // particular UUID's
peripheral.discoverAllServicesAndCharacteristics([callback(error, services, characteristics)]);
var serviceUUIDs = ["<service UUID 1>", ...];
var characteristicUUIDs = ["<characteristic UUID 1>", ...];
peripheral.discoverSomeServicesAndCharacteristics(serviceUUIDs, characteristicUUIDs, [callback(error, services, characteristics));
service.discoverIncludedServices(); // any service UUID
var serviceUUIDs = ["<service UUID 1>", ...];
service.discoverIncludedServices(serviceUUIDs[, callback(error, includedServiceUuids)]); // particular UUID's
service.discoverCharacteristics() // any characteristic UUID
var characteristicUUIDs = ["<characteristic UUID 1>", ...];
service.discoverCharacteristics(characteristicUUIDs[, callback(error, characteristics)]); // particular UUID's
characteristic.read([callback(error, data)]);
characteristic.write(data, withoutResponse[, callback(error)]); // data is a buffer, withoutResponse is true|false
withoutResponse:
false: send a write request, used with "write" characteristic propertytrue: send a write command, used with "write without response" characteristic propertycharacteristic.broadcast(broadcast[, callback(error)]); // broadcast is true|false
characteristic.subscribe([callback(error)]);
'data' events when peripheral sends an notification or indicationcharacteristic.unsubscribe([callback(error)]);
characteristic.discoverDescriptors([callback(error, descriptors)]);
descriptor.readValue([callback(error, data)]);
descriptor.writeValue(data[, callback(error)]); // data is a buffer
peripheral.readHandle(handle, callback(error, data));
peripheral.writeHandle(handle, data, withoutResponse, callback(error));
See Node.js EventEmitter docs for more info. on API's.
state = <"unknown" | "resetting" | "unsupported" | "unauthorized" | "poweredOff" | "poweredOn">
noble.on('stateChange', callback(state));
noble.on('scanStart', callback);
The event is emitted when scanning is started or if another application enables scanning or changes scanning settings.
noble.on('scanStop', callback);
The event is emitted when scanning is stopped or if another application stops scanning.
peripheral = {
id: "<id>",
address: "<BT address">, // Bluetooth Address of device, or 'unknown' if not known
addressType: "<BT address type>", // Bluetooth Address type (public, random), or 'unknown' if not known
connectable: <connectable>, // true or false, or undefined if not known
advertisement: {
localName: "<name>",
txPowerLevel: <int>,
serviceUuids: ["<service UUID>", ...],
serviceSolicitationUuid: ["<service solicitation UUID>", ...],
manufacturerData: <Buffer>,
serviceData: [
{
uuid: "<service UUID>"
data: <Buffer>
},
...
]
},
rssi: <rssi>
};
noble.on('discover', callback(peripheral));
Note: on OS X the address will be set to 'unknown' if the device has not been connected previously.
noble.on('warning', callback(message));
peripheral.once('connect', callback);
peripheral.once('disconnect', callback);
peripheral.once('rssiUpdate', callback(rssi));
peripheral.once('servicesDiscover', callback(services));
service.once('includedServicesDiscover', callback(includedServiceUuids));
characteristic = {
uuid: "<uuid>",
// properties: 'broadcast', 'read', 'writeWithoutResponse', 'write', 'notify', 'indicate', 'authenticatedSignedWrites', 'extendedProperties'
properties: [...]
};
service.once('characteristicsDiscover', callback(characteristics));
Emitted when characteristic read has completed, result of characteristic.read(...) or characteristic value has been updated by peripheral via notification or indication - after having been enabled with notify(true[, callback(error)]).
characteristic.on('data', callback(data, isNotification));
characteristic.once('read', callback(data, isNotification)); // legacy
Note: isNotification event parameter value MAY be undefined depending on platform support. The parameter is deprecated after version 1.8.1, and not supported when on macOS High Sierra and later.
Emitted when characteristic write has completed, result of characteristic.write(...).
characteristic.once('write', withoutResponse, callback());
Emitted when characteristic broadcast state changes, result of characteristic.broadcast(...).
characteristic.once('broadcast', callback(state));
Emitted when characteristic notification state changes, result of characteristic.notify(...).
characteristic.once('notify', callback(state));
descriptor = {
uuid: '<uuid>'
};
characteristic.once('descriptorsDiscover', callback(descriptors));
descriptor.once('valueRead', data);
descriptor.once('valueWrite');
Run the following command:
sudo setcap cap_net_raw+eip $(eval readlink -f `which node`)
This grants the node binary cap_net_raw privileges, so it can start/stop BLE advertising.
Note: The above command requires setcap to be installed, it can be installed using the following:
sudo apt-get install libcap2-binsu -c \'yum install libcap2-bin\'hci0 is used by default to override set the NOBLE_HCI_DEVICE_ID environment variable to the interface number.
Example, specify hci1:
sudo NOBLE_HCI_DEVICE_ID=1 node <your file>.js
By default noble waits for both the advertisement data and scan response data for each Bluetooth address. If your device does not use scan response the following environment variable can be used to bypass it.
sudo NOBLE_REPORT_ALL_HCI_EVENTS=1 node <your file>.js
By default noble will respond with an error whenever a GATT request message is received. If your intention is to use bleno in tandem with noble, the following environment variable can be used to bypass this functionality. Note: this requires a Bluetooth 4.1 adapter.
sudo NOBLE_MULTI_ROLE=1 node <your file>.js
By default, noble will select bindings to communicate with Bluetooth devices depending on your platform. If you prefer to specify what bindings noble should use:
var noble = require('noble/with-bindings')(require('./my-custom-bindings'));
Support us with a monthly donation and help us continue our activities. [Become a backer]
Become a sponsor and get your logo on our README on Github with a link to your site. [Become a sponsor]
Copyright (C) 2015 Sandeep Mistry sandeep.mistry@gmail.com
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Version 1.9.1
FAQs
A Node.js BLE (Bluetooth Low Energy) central library.
The npm package noble receives a total of 513 weekly downloads. As such, noble popularity was classified as not popular.
We found that noble demonstrated a not healthy version release cadence and project activity because the last version was released a year ago. It has 3 open source maintainers collaborating on the project.
Did you know?
Socket for GitHub automatically highlights issues in each pull request and monitors the health of all your open source dependencies. Discover the contents of your packages and block harmful activity before you install or update your dependencies.
Research
Security News
Socket researchers uncover a malicious npm package posing as a tool for detecting vulnerabilities in Etherium smart contracts.
Security News
Research
A supply chain attack on Rspack's npm packages injected cryptomining malware, potentially impacting thousands of developers.
Research
Security News
Socket researchers discovered a malware campaign on npm delivering the Skuld infostealer via typosquatted packages, exposing sensitive data.