wicg-inert

inert attribute

Table of Contents

• tl;dr
• Background
• Spec
  • Spec gaps
• The case for inert as a primitive
  • Use cases
• Wouldn't this be better as...
• Notes on the polyfill
  • Install
  • Legacy Browser Support

tl;dr

The inert attribute would allow web authors to mark parts of the DOM tree as inert:

When a node is inert, then the user agent must act as if the node was absent for the purposes of targeting user interaction events, may ignore the node for the purposes of text search user interfaces (commonly known as "find in page"), and may prevent the user from selecting text in that node.

Furthermore, a node which is inert should also be hidden from assistive technology.

Try out the polyfill, or look at the demo page.

Background

The inert attribute was originally specced as part of the <dialog> element specification. <dialog> required the concept of inert to be defined in order to describe the blocking behaviour of dialogs, and the inert attribute was introduced "so you could do <dialog> without <dialog>".

The attribute was later removed as it was argued that its only use case was subsumed by <dialog>. However, later discussion on the original bug proposed several use cases which could not be handled, or only handled poorly, using <dialog>.

Spec

The spec for the inert attribute, with the existing definition of "inert" already specified, is extremely straightforward:

The inert attribute

The inert attribute is a boolean attribute that indicates, by its presence, that the element is to be made inert.

When an element has an inert attribute, the user agent must mark that element as inert.

By default, there is no visual indication of a subtree being inert. Authors are encouraged to clearly mark what parts of their document are active and which are inert, to avoid user confusion. In particular, it is worth remembering that not all users can see all parts of a page at once; for example, users of screen readers, users on small devices or with magnifiers, and even users just using particularly small windows might not be able to see the active part of a page and may get frustrated if inert sections are not obviously inert. For individual controls, the disabled attribute is probably more appropriate.

Spec gaps

• The spec does not explicitly state what effect inert has on the subtree of the element marked as inert, however it is implied by the note that inert causes the entire subtree of the element with the inert attribute to be made inert. The polyfill makes the assumption that the entire subtree becomes inert.

  • Furthermore, the spec is unclear as to whether the attribute applies into shadow trees. Consistency with CSS attributes and with inheriting attributes like aria-hidden and lang imply that it should. The polyfill assumes that it does so.

• The existing description of inert is not specific about where pointer events which would have been targeted to an element in an inert subtree should go. (See also: discussion on the WHATWG pull request.) Does the event:

  1. go to the next non-inert element in the hit test stack? (The inert element is "transparent" for pointer events.)
  2. go to the next non-inert parent element?
  3. simply not fire?

  Consistency with pointer-events would suggest (ii). The polyfill uses pointer-events: none and so models its behaviour.

• The spec is also not explicit about whether the attribute should be reflected. The polyfill assumes that it is.

• The spec does not explicitly state that inert content should be hidden from assistive technology. However, typically, the HTML spec does not provide this type of information. The polyfill makes inert content hidden from assistive technology (via aria-hidden).

• The spec does not make explicit that there is no way to "un-inert" a subtree of an inert subtree.

The case for inert as a primitive

Developers find themselves in situations where they'd like to be able to mark a part of the page "un-tabbable". Rob Dodson lays out one such example in his article "Building better accessibility primitives":

One problem: to [achieve a performance optimisation for animation] we must leave the drawer in the DOM at all times. Meaning its focusable children are just sitting there offscreen, and as the user is tabbing through the page eventually their focus will just disappear into the drawer and they won't know where it went. I see this on responsive websites all the time. This is just one example but I've also run into the need to disable tabindex when I'm animating between elements with opacity: 0, or temporarily disabling large lists of custom controls, and as others have pointed out, you'd hit if you tried to build something like coverflow where you can see a preview of the next element but can't actually interact with it yet.

inert would also allow slightly more straightforward polyfilling of both <dialog> and the proposed, more primitive blockingElements API. See Polymer Labs' blockingElements polyfill, based on this polyfill, for an example of how inert may be used for this purpose. Currently, since there is no way to express the "inertness" concept, polyfilling these APIs requires both focus event trapping to avoid focus cycling out of the dialog/blocking element (and thus as a side effect may prevent focus from walking out of the page at all) and a tree-walk (usually neglected by developers) to set aria-hidden on all sibling elements of the dialog or blocking element.

On the implementer side, the vast majority of work involved in implementing inert is a necessary pre-cursor to both <dialog> and blockingElements implementations, so by implementing inert first, implementers may get useful functionality into the hands of developers sooner while still laying the groundwork for one or both of these more complex APIs.

Use cases

• Temporarily offscreen/hidden content

  As discussed in the article, there are a range of circumstances in which case it's desirable to add content to the DOM to be rendered but remain offscreen.

  In these cases, without inert, authors are forced to choose between an accessible experience for keyboard and assistive technology users, or the factors (such as performance) which make offscreen rendering desirable - or, performing all the contortions necessary to keep the offscreen content functionally "inert".

  These cases include:

  • rendering content, such as a menu, offscreen, before having it animate on-screen;
  • similarly, for content like a menu which may be repeatedly shown to the user, avoiding re-rendering this content each time;
  • a carousel or other type of content cycler (such as a "tweet cycler") which visually hides non-current items by placing them at a lower z-index than the active item, or by setting their opacity to zero, and animates transitions between items;
  • "infinitely scrolling" UI which re-uses and/or pre-renders nodes.

• On-screen but non-interactive content

  Occasionally, UI designs require that certain content be visible or partially visible, but clearly non-interactive. Typically, this content is made non-interactive for pointer device users either via a semi-transparent overlay which provides a visual cue as well as intercepting pointer events, or via using pointer-events: none.

  In these cases developers are once again required to perform contortions in order to ensure that this content is not an accessibility issue.

  These cases include:

  • Any of the use cases for blockingElement[s]:

    • a modal dialog;
    • a focus-trapping menu;
    • a side nav.

  • A slide show or "cover flow" style carousel may have non-active items partially visible, as a preview - they may be transformed or partially obscured to indicate that they are non-interactive.

  • Form content which is not currently relevant, e.g. fading out and disabling the "Shipping Address" fields when the "Same as billing address" checkbox has been checked.

  • Disabling the entire UI while in an inconsistent state, such as showing a throbber/loading bar during unexpectedly slow loading.

Wouldn't this be better as...

• A CSS property?

  inert encompasses the behaviour of at least two other things which are CSS properties - pointer-events: none and user-select: none, plus another attribute, aria-hidden. These behaviours, along with the currently near-impossible to achieve behaviour of preventing tabbing/programmatic focus, are very frequently applied together (or if one, such as aria-hidden, is omitted, it is more often through lack of awareness than deliberate).

  There is scope for a more primitive CSS property to "explain" the ability of inert to prevent focus, however that could easily coexist with the inert attribute.

• blockingElements?

  blockingElements (or, potentially, a single blockingElement) represents roughly the opposite use case to inert: a per-document, single element which blocks the document, analogous to the blocking behaviour of a modal dialog.

  It's not always the case that we will want a single subtree to be non-inert. Ideally, we would have both concepts available; however, inert allows reasonable approximation of blockingElements whereas the reverse is not true.

  • To approximate a blockingElement using inert, it's most straightforward to insert a non-inert element as a sibling element to the main page content, and then use inert to mark the main page content as inert. More generally, all siblings of the desired "blocking" element, plus all siblings of all of its ancestors, could be marked inert.

• A programmatic API?

  Something like document.makeInert(el).

  This would require waiting for script execution before parts of the page became inert, which can take some time.

Notes on the polyfill

The dist directory contains a transpiled, UMD build of inert.js generated from the ES6 source. There is also an HTML Import available in the root of the project at inert.html.

The polyfill attempts to provide a reasonable fidelity polyfill for the inert attribute, however please note:

• It relies on mutation observers to detect the addition of the inert attribute, and to detect dynamically added content within inert subtrees. Testing for inert-ness in any way immediately after either type of mutation will therefore give inconsistent results; please allow the current task to end before relying on mutation-related changes to take effect, for example via Promise.resolve().

  Example:

const newButton = document.createElement('button');
const inertContainer = document.querySelector('[inert]');
inertContainer.appendChild(newButton);
// Wait for the next microtask to allow mutation observers to react to the DOM change
Promise.resolve().then(() => {
    expect(isUnfocusable(newButton)).to.equal(true);
});

• Using the inert property, however, is synchronous.

• It will be very expensive performance-wise compared to a native inert implementation, because it requires a lot of tree-walking on any relevant mutation (applying inert, or adding descendant content into inert subtrees).

  • To mitigate this, avoid these types of mutations as much as possible when using this polyfill.

Install

Using npm:

npm install --save wicg-inert

Using Bower:

bower install --save WICG/inert

Legacy Browser Support

If you want to use inert with an older browser or JavaScript runtime like PhantomJS you'll need to include a polyfill for Map and Set, such as babel-polyfill. As suggested on StackOverflow, try adding the following to the document in your build process:

<script src="https://cdnjs.cloudflare.com/ajax/libs/babel-polyfill/6.16.0/polyfill.min.js"></script>