A thin Python library for the Abode alarm API. Only compatible with Python 3+
Disclaimer:
Published under the MIT license - See LICENSE file for more details.
"Abode" is a trademark owned by Abode Systems Inc., see www.goabode.com for more information.
I am in no way affiliated with Abode.
Thank you Abode for having a relatively simple API to reverse engineer. Hopefully in the future you'll
open it up for official use.
API calls faster than 60 seconds is not recommended as it can overwhelm Abode's servers. Leverage the cloud push
event notification functionality as much as possible. Please use this module responsibly.
Installation
============
From PyPi:
pip3 install abodepy
Command Line Usage
==================
Simple command line implementation arguments::
$ abodepy --help
usage: AbodePy: Command Line Utility [-h] -u USERNAME -p PASSWORD [--mode]
[--arm mode] [--set setting=value]
[--devices] [--device device_id]
[--json device_id] [--on device_id]
[--off device_id] [--lock device_id]
[--unlock device_id] [--automations]
[--activate automation_id]
[--deactivate automation_id]
[--trigger automation_id] [--listen]
[--debug] [--quiet]
optional arguments:
-h, --help show this help message and exit
-u USERNAME, --username USERNAME
Username
-p PASSWORD, --password PASSWORD
Password
--mode Output current alarm mode
--arm mode Arm alarm to mode
--set setting=value Set setting to a value
--devices Output all devices
--device device_id Output one device for device_id
--json device_id Output the json for device_id
--on device_id Switch on a given device_id
--off device_id Switch off a given device_id
--lock device_id Lock a given device_id
--unlock device_id Unlock a given device_id
--automations Output all automations
--activate automation_id
Activate (enable) an automation by automation_id
--deactivate automation_id
Deactivate (disable) an automation by automation_id
--trigger automation_id
Trigger (apply) an automation (manual quick-action) by
automation_id
--listen Block and listen for device_id
--debug Enable debug logging
--quiet Output only warnings and errors
You can get the current alarm mode::
$ abodepy -u USERNAME -p PASSWORD --mode
Mode: standby
To set the alarm mode, one of 'standby', 'home', or 'away'::
$ abodepy -u USERNAME -p PASSWORD --arm home
Mode set to: home
A full list of devices and their current states::
$ abodepy -u USERNAME -p PASSWORD --devices
Device Name: Glass Break Sensor, Device ID: RF:xxxxxxxx, Device Type: GLASS, Device Status: Online
Device Name: Keypad, Device ID: RF:xxxxxxxx, Device Type: Keypad, Device Status: Online
Device Name: Remote, Device ID: RF:xxxxxxxx, Device Type: Remote Controller, Device Status: Online
Device Name: Garage Entry Door, Device ID: RF:xxxxxxxx, Device Type: Door Contact, Device Status: Closed
Device Name: Front Door, Device ID: RF:xxxxxxxx, Device Type: Door Contact, Device Status: Closed
Device Name: Back Door, Device ID: RF:xxxxxxxx, Device Type: Door Contact, Device Status: Closed
Device Name: Status Indicator, Device ID: ZB:xxxxxxxx, Device Type: Status Display, Device Status: Online
Device Name: Downstairs Motion Camera, Device ID: ZB:xxxxxxxx, Device Type: Motion Camera, Device Status: Online
Device Name: Back Door Deadbolt, Device ID: ZW:xxxxxxxx, Device Type: Door Lock, Device Status: LockClosed
Device Name: Front Door Deadbolt, Device ID: ZW:xxxxxxxx, Device Type: Door Lock, Device Status: LockClosed
Device Name: Garage Door Deadbolt, Device ID: ZW:xxxxxxxx, Device Type: Door Lock, Device Status: LockClosed
Device Name: Alarm area_1, Device ID: area_1, Device Type: Alarm, Device Status: standby
The current state of a specific device using the device id::
$ abodepy -u USERNAME -p PASSWORD --device ZW:xxxxxxxx
Device Name: Garage Door Deadbolt, Device ID: ZW:xxxxxxxx, Device Type: Door Lock, Device Status: LockClosed
Additionally, multiple specific devices using the device id::
$ abodepy -u USERNAME -p PASSWORD --device ZW:xxxxxxxx --device RF:xxxxxxxx
Device Name: Garage Door Deadbolt, Device ID: ZW:xxxxxxxx, Device Type: Door Lock, Device Status: LockClosed
Device Name: Back Door, Device ID: RF:xxxxxxxx, Device Type: Door Contact, Device Status: Closed
You can switch a device on or off, or lock and unlock a device by passing multiple arguments::
$ abodepy -u USERNAME -p PASSWORD --lock ZW:xxxxxxxx --switchOn ZW:xxxxxxxx
Locked device with id: ZW:xxxxxxxx
Switched on device with id: ZW:xxxxxxxx
You can also block and listen for all mode and change events as they occur::
$ abodepy -u USERNAME -p PASSWORD --listen
No devices specified, adding all devices to listener...
Listening for device updates...
Device Name: Alarm area_1, Device ID: area_1, Status: standby, At: 2017-05-27 11:13:08
Device Name: Garage Door Deadbolt, Device ID: ZW:xxxxxxxx, Status: LockOpen, At: 2017-05-27 11:13:31
Device Name: Garage Entry Door, Device ID: RF:xxxxxxxx, Status: Open, At: 2017-05-27 11:13:34
Device Name: Garage Entry Door, Device ID: RF:xxxxxxxx, Status: Closed, At: 2017-05-27 11:13:39
Device Name: Garage Door Deadbolt, Device ID: ZW:xxxxxxxx, Status: LockClosed, At: 2017-05-27 11:13:41
Device Name: Alarm area_1, Device ID: area_1, Status: home, At: 2017-05-27 11:13:59
Device update listening stopped.
If you specify one or more devices with the --device argument along with the --listen command then only those devices will listen for change events.
Keyboard interrupt (CTRL+C) to exit listening mode.
To obtain a list of automations::
$ abodepy -u USERNAME -p PASSWORD --automations
Deadbolts Lock Home (ID: 6) - status - active
Auto Home (ID: 3) - location - active
Lock Garage Quick Action (ID: 7) - manual - active
Deadbolts Lock Away (ID: 5) - status - active
Autostandby (ID: 4) - schedule - active
Auto Away (ID: 2) - location - active
Sleep Mode (ID: 1) - schedule - active
To activate or deactivate an automation::
$ abodepy -u USERNAME -p PASSWORD --activate 1
Activated automation with id: 1
To trigger a manual (quick) automation::
$ abodepy -u USERNAME -p PASSWORD --trigger 7
Triggered automation with id: 1
Settings
========
You can change settings with abodepy either using abode.set_setting(setting, value) or through the command line::
$ abodepy -u USERNAME -p PASSWORD --set beeper_mute=1
Setting beeper_mute changed to 1
+-----------------------+-----------------------------------------------------------------------------+
| Setting | Valid Values |
+=======================+=============================================================================+
| ircamera_resolution_t | 0 for 320x240x3, 2 for 640x480x3 |
+-----------------------+-----------------------------------------------------------------------------+
| ircamera_gray_t | 0 for disabled, 1 for enabled |
+-----------------------+-----------------------------------------------------------------------------+
| beeper_mute | 0 for disabled, 1 for enabled |
+-----------------------+-----------------------------------------------------------------------------+
| away_entry_delay | 0, 10, 20, 30, 60, 120, 180, 240 |
+-----------------------+-----------------------------------------------------------------------------+
| away_exit_delay | 30, 60, 120, 180, 240 |
+-----------------------+-----------------------------------------------------------------------------+
| home_entry_delay | 0, 10, 20, 30, 60, 120, 180, 240 |
+-----------------------+-----------------------------------------------------------------------------+
| home_exit_delay | 0, 10, 20, 30, 60, 120, 180, 240 |
+-----------------------+-----------------------------------------------------------------------------+
| door_chime | none, normal, loud |
+-----------------------+-----------------------------------------------------------------------------+
| warning_beep | none, normal, loud |
+-----------------------+-----------------------------------------------------------------------------+
| entry_beep_away | none, normal, loud |
+-----------------------+-----------------------------------------------------------------------------+
| exit_beep_away | none, normal, loud |
+-----------------------+-----------------------------------------------------------------------------+
| entry_beep_home | none, normal, loud |
+-----------------------+-----------------------------------------------------------------------------+
| exit_beep_home | none, normal, loud |
+-----------------------+-----------------------------------------------------------------------------+
| confirm_snd | none, normal, loud |
+-----------------------+-----------------------------------------------------------------------------+
| alarm_len | 0, 60, 120, 180, 240, 300, 360, 420, 480, 540, 600, 660, 720, 780, 840, 900 |
+-----------------------+-----------------------------------------------------------------------------+
| final_beep | 0, 3, 4, 5, 6, 7, 8, 9, 10 |
+-----------------------+-----------------------------------------------------------------------------+
| entry | (Siren) 0 for disabled, 1 for enabled |
+-----------------------+-----------------------------------------------------------------------------+
| tamper | (Siren) 0 for disabled, 1 for enabled |
+-----------------------+-----------------------------------------------------------------------------+
| confirm | (Siren) 0 for disabled, 1 for enabled |
+-----------------------+-----------------------------------------------------------------------------+
Development and Testing
=======================
Install the core dependencies::
$ sudo apt-get install python3-pip python3-dev python3-venv
Checkout from github and then create a virtual environment::
$ git clone https://github.com/MisterWil/abodepy.git
$ cd abodepy
$ python3 -m venv venv
Activate the virtual environment::
$ source venv/bin/activate
Install requirements::
$ pip install -r requirements.txt -r requirements_test.txt
Install abodepy locally in "editable mode"::
$ pip3 install -e .
Run the run the full test suite with tox before commit::
$ tox
Alternatively you can run just the tests::
$ tox -e py35
Library Usage
=============
TODO
Class Descriptions
==================
TODO
.. |Build Status| image:: https://travis-ci.org/MisterWil/abodepy.svg?branch=master
:target: https://travis-ci.org/MisterWil/abodepy
.. |Coverage Status| image:: https://coveralls.io/repos/github/MisterWil/abodepy/badge.svg
:target: https://coveralls.io/github/MisterWil/abodepy
FAQs
An Abode alarm Python library running on Python 3.
We found that abodepy demonstrated a healthy version release cadence and project activity because the last version was released less than a year ago. It has 1 open source maintainer collaborating on the project.
Did you know?
Socket for GitHub automatically highlights issues in each pull request and monitors the health of all your open source dependencies. Discover the contents of your packages and block harmful activity before you install or update your dependencies.
Security News
Research
The Socket Research Team breaks down a malicious wrapper package that uses obfuscation to harvest credentials and exfiltrate sensitive data.
Research
Security News
Attackers used a malicious npm package typosquatting a popular ESLint plugin to steal sensitive data, execute commands, and exploit developer systems.
Security News
The Ultralytics' PyPI Package was compromised four times in one weekend through GitHub Actions cache poisoning and failure to rotate previously compromised API tokens.