The canonical Python interface for the autograding server.
To provide easy access to a limited number of commands,
we provide the autograder.run suite of shortcuts.
These are just a small number of the most commonly used commands.
For a more in-depth look at the available commands,
see the cli section of this document.
autograder.run.submitThis command sends an assignment submission to the server.
This is a shortcut for autograder.cli.courses.assignments.submissions.submit.
python3 -m autograder.run.submit my_file.py
autograder.run.historyThis command gets a summary of all your past submissions for an assignment.
This is a shortcut for autograder.cli.courses.assignments.submissions.user.history.
python3 -m autograder.run.history
autograder.run.peekThis command shows you your most recent (or a specific) submission for an assignment.
This is a shortcut for autograder.cli.courses.assignments.submissions.user.peek.
python3 -m autograder.run.peek
To get a specific submission, just pass the submission ID (as shown in autograder.run.history).
python3 -m autograder.run.peek 123456789
autograder.run.authYou can use this command to quickly check if your password/config is correct.
This is a shortcut for autograder.cli.users.auth.
python3 -m autograder.run.auth
autograder.run.change-passThis command lets your change your password to whatever you want.
This is a shortcut for autograder.cli.users.pass.change.
python3 -m autograder.run.change-pass
You will then be prompted to enter (and re-enter) your new password.
autograder.run.reset-passThis command will reset your password by sending an email to your registered email address.
This is a shortcut for autograder.cli.users.pass.reset.
python3 -m autograder.run.reset-pass
This project contains several tools for interacting with an autograding server and
working with autograder assignments via the autograder.cli package.
All tools will show their usage if given the --help options.
You can get a list of the package for each set of tools by invoking autograder.cli directly:
python3 -m autograder.cli
If you want to see every tool a package (and all its subpackages) have available in one output,
you can use the -r/--recursive flag:
python3 -m autograder.cli --recursive
There are many available tools and instead of discussing each one here, this document will highlight the tools each type of user (student, TA, course developer) will generally use.
Before discussing specific tools, you should know some general information about configuring and sending options to each tool.
To know who you are and what you are working on the autograder needs a few configuration options:
server -- The autograding server to connect to.course -- The ID for the course you are enrolled in.assignment -- The current assignment you are working on (does not always apply)..user -- Your username (which is also your email).pass -- Your password (probably sent to you by the autograding server in an email).All these options can be set on the command line when invoking on of these tools, e.g.,:
python3 -m autograder.run.submit --user sammy@ucsc.edu --pass pass123 my_file.py
However, it will generally be more convenient to hold these common options in a more reusable location.
There are several other places that config options can be specified, with each later location overriding any earlier options. Here are the places options can be specified in the order that they are checked:
./config.json -- If a config.json exists in the current directory, it is loaded.<platform-specific user config location>/autograder.json -- A directory which is considered the "proper" place to store user-related config for the platform you are using (according to platformdirs). Use --help to see the exact place in your specific case. This is a great place to store login credentials.--config -- These files are loaded in the order they appear on the command-line.--user or --pass. These will override all previous options.A base config file (config.json) is often distributed with assignments that contains most the settings you need.
You can modify this config to include your settings and use that for setting all your configuration options.
Using the default config file (config.json):
# `./config.json` will be looked for and loaded if it exists.
python3 -m autograder.run.submit my_file.py
Using a custom config file (my_config.json):
# `./my_config.json` will be used.
python3 -m autograder.run.submit --config my_config.json my_file.py
You can also use multiple config files (latter files will override settings from previous ones). This is useful if you want to use the config files provided with assignments, but keep your user credentials in a more secure location:
# Use the default config file (config.json), but then override any settings in there with another config file:
python3 -m autograder.run.submit --config config.json --config ~/.secrets/autograder.json my_file.py
For brevity, all future commands in this document will assume that all standard config options are in the default config files (and thus will not need to be specified).
Students will mainly be concerned with submitting assignments and checking on the status of their submission.
Therefore, the autograder.run package will be their primary resource.
This package contains tools for making, managing, and querying submissions.
Submitting an assignment to an autograder is done using the autograder.run.submit command.
This command takes the standard config options as well as an optional message to attach to the submission (like a commit message)
as well as all files to be included in the submission.
python3 -m autograder.run.submit --message "This is my submit message!" my_file.py
As many files as you need can be submitted (directories cannot be submitted):
python3 -m autograder.run.submit my_first_file.py my_second_file.java some_dir/*
The autograder will attempt to grade your assignment and will return some message about the result of grading. For example, a successful grading may look like:
The autograder successfully graded your assignment.
Autograder transcript for assignment: HO0.
Grading started at 2023-09-26 08:35 and ended at 2023-09-26 08:35.
Task 1.A (my_function): 40 / 40
Task 2.A (test_my_function_value): 30 / 30
Task 2.B (TestMyFunction): 30 / 30
Style: 0 / 0
Style is clean!
Total: 100 / 100
On any successful grading (even if you got a zero), your result has been saved by the autograder and is in the system. On a submission failure, the autograder will tell you and you will not receive any grade for your submission. A failure may look like:
The autograder failed to grade your assignment.
Message from the autograder: Request could not be authenticated. Ensure that your username, password, and course are properly set.
You can ask the autograder to show you the grade report for your last submission using the
autograder.run.peek command.
python3 -m autograder.run.peek
The output may look like:
Found a past submission for this assignment.
Autograder transcript for assignment: HO0.
Grading started at 2023-09-26 08:35 and ended at 2023-09-26 08:35.
Task 1.A (my_function): 40 / 40
Task 2.A (test_my_function_value): 30 / 30
Task 2.B (TestMyFunction): 30 / 30
Style: 0 / 0
Style is clean!
Total: 100 / 100
If you have made no past (successful) submissions, then your output may look like:
No matching submission found.
You can use the autograder.run.history command to get a summary of all your past submissions for an assignment.
python3 -m autograder.run.history
The output may look like:
Found 2 submissions.
Submission ID: 1695682455, Score: 24 / 100, Time: 2023-09-25 17:54.
Submission ID: 1695735313, Score: 100 / 100, Time: 2023-09-26 08:35, Message: 'I did it!'
If you have made no past (successful) submissions, then your output may look like:
No matching submission found.
Your password is the same throughout a single instance of the autograding server. This means that multiple courses that run on the same server will all use your same account (and therefore password).
Your initial password should have been emailed to the email associated with your account (typically your school email address).
To reset your password,
use the autograder.run.reset-pass (aka autograder.cli.users.pass.reset) command:
python3 -m autograder.run.reset-pass
This will email you a new random password to your account's email. Once your password is reset, it is recommended to change it to whatever you want.
To change your password, you can use the
autograder.run.change-pass (aka autograder.cli.users.pass.change) command:
python3 -m autograder.run.change-pass
You will then be prompted to enter (and re-enter) your new password.
See the command's help prompt (--help) for additional ways you can supply your password.
For those that are managing a course and students, most commands will be useful to you. So you should have a look through all commands via:
python3 -m autograder.cli -r
This will list all available packages and commands.
You can omit the -r if you want to look at one package at a time.
For example, to inspect the autograder.run package, you can do:
python -m autograder.run
Below is a list of commands you may want to look into.
The help prompt of each command (accessible using the --help option)
will give a more in-depth description of the command and available options.
autograder.lms.upload-scores -- Upload scores for any LMS assignment straight to your LMS. Very useful for avoiding a clunky LMS interface.autograder.cli.courses.assignments.submissions.fetch.course.scores -- Get all the most recent scores for an assignment.autograder.cli.courses.assignments.submissions.fetch.user.attempt -- Get a student's submission (code) and grading output.autograder.cli.courses.assignments.submissions.fetch.course.attempts -- Get all the most recent submissions (code and grading output) for an assignment.autograder.cli.courses.users.list -- List all the users in a course.Users who are building courses should generally be aware of all the available tools,
but most of your time will probably be spent in the
autograder.cli.testing and autograder.cli.grading packages.
autograder.cli.testing is for running tests and checks (usually locally) on assignments.
autograder.cli.grading lets you grade assignments locally (without using an autograding server).
Because the autograding server runs this package inside a Docker container to do grading,
it can be much faster and more convenient to build assignments fully locally before using an autograding server.
FAQs
The Python interface for the autograding server.
We found that autograder-py demonstrated a healthy version release cadence and project activity because the last version was released less than a year ago. It has 1 open source maintainer collaborating on the project.
Did you know?
Socket for GitHub automatically highlights issues in each pull request and monitors the health of all your open source dependencies. Discover the contents of your packages and block harmful activity before you install or update your dependencies.
Security News
PyPI confirms no security flaws were exploited in the Ultralytics supply chain attack and highlights improvements for safer package publishing.
Security News
Research
The Socket Research Team breaks down a malicious wrapper package that uses obfuscation to harvest credentials and exfiltrate sensitive data.
Research
Security News
Attackers used a malicious npm package typosquatting a popular ESLint plugin to steal sensitive data, execute commands, and exploit developer systems.