pybldc

pybldc

Developed by Kristian Sloth Lauszus, 2024

The code is released under the GNU General Public License v3.0.

---

Purpose

This tool allows you to flash a VESC via CAN-bus or serial/USB using Python.

Installation and running

To install:

pip install .

Or install the latest release from PyPI:

pip3 install -U pybldc

CLI

A handy CLI tool is included:

$ pybldc -h
usage: pybldc [-id CONTROLLER_ID] [-i INTERFACE] [-l CHANNEL] [-p PORT] [-h] [--version] [-B BINARY] [--bootloader] [-t TIMEOUT] [-r PING_REPEAT] [-b BAUDRATE] [--debug] {can,serial} {upload,ping,reset}

positional arguments:
  {can,serial}          Communicate with the target via either CAN or serial
  {upload,ping,reset}   upload: write BINARY
                        ping: send a ping command to the target and check for a response
                        reset: send a reset command to the target and check for a response

required CAN arguments:
  -id CONTROLLER_ID, --controller-id CONTROLLER_ID
                        The VESC ID used for communication

optional CAN arguments:
  -i INTERFACE, --interface INTERFACE
                        The CAN-Bus interface to use (default "socketcan")
  -l CHANNEL, --channel CHANNEL
                        The CAN-Bus channel to use (default "can0")

required serial arguments:
  -p PORT, --port PORT  The port to use for serial

optional arguments:
  -h, --help            Show this help message and exit
  --version             Show program's version number and exit
  -B BINARY, --binary BINARY
                        The binary to upload
  --bootloader          The binary to upload is a bootloader
  -t TIMEOUT, --timeout TIMEOUT
                        The time to wait in seconds for a response (default 5.0)
  -r PING_REPEAT, --ping-repeat PING_REPEAT
                        The number of times to try to establish a connection by pinging the VESC (default 3)
  -b BAUDRATE, --baudrate BAUDRATE, --bitrate BAUDRATE
                        The baudrate/bitrate to use for serial/can (defaults to 115200 for serial and 500000 for CAN)
  --debug               Turn on debug logs

Upload

pybldc can upload -id 1 -B VESC.bin

pybldc serial upload -p /dev/ttyACM0 -B VESC.bin

Ping

pybldc can ping -id 1

pybldc serial ping -p /dev/ttyACM0

Reset

pybldc can reset -id 1

pybldc serial reset -p /dev/ttyACM0

Credit

• VESC firmware: https://github.com/vedderb/bldc
• VESC bootloader: https://github.com/vedderb/bldc-bootloader
• VESC Tool: https://github.com/vedderb/vesc_tool