Author: Chou-han Yang (@chouhanyang)
Current Maintainers: Naveen Vardhi (@rozuur) | Navin Pai (@navinpai)
--API-ServerSideEncryption along with 36 new API pass-through options. See API pass-through options section for complete list.S4CMD_OPTS environment variable for commonly used options such as --API-ServerSideEncryption across all your s4cmd operations.--last-modified-before and --last-modified-after options for all operations. Human friendly timestamps are supported, e.g. --last-modified-before='2 months ago'dsync command is better and standalone implementation to replace old sync command, which is implemented based on top of get/put/mv commands. --delete-removed work for all cases including local to s3, s3 to local, and s3 to s3. sync command preserves the old behavior in this version for compatibility.S4cmd is a command-line utility for accessing Amazon S3, inspired by s3cmd.
We have used s3cmd heavily for a number of scripted, data-intensive applications. However as the need for a variety of small improvements arose, we created our own implementation, s4cmd. It is intended as an alternative to s3cmd for enhanced performance and for large files, and with a number of additional features and fixes that we have found useful.
It strives to be compatible with the most common usage scenarios for s3cmd. It does not offer exact drop-in compatibility, due to a number of corner cases where different behavior seems preferable, or for bugfixes.
S4cmd supports the regular commands you might expect for fetching and storing
files in S3: ls, put, get, cp, mv, sync, del, du.
The main features that distinguish s4cmd are:
s3:// and s3n:// prefixes (the latter is common with
Amazon Elastic Mapreduce).Limitations:
sync with get and put with --recursive --force --sync-check.You can install s4cmd PyPI.
pip install s4cmd
s4cmd.py as s4cmd. (It is just
a single file!)~/.s3cfg file from configuring s3cmd, credentials
from this file will be used. Otherwise, set the S3_ACCESS_KEY and
S3_SECRET_KEY environment variables to contain your S3 credentials.s4cmd ls [path]List all contents of a directory.
s4cmd put [source] [target]Upload local files up to S3.
s4cmd get [source] [target]Download files from S3 to local filesystem.
s4cmd dsync [source dir] [target dir]Synchronize the contents of two directories. The directory can either be local or remote, but currently, it doesn't support two local directories.
s4cmd sync [source] [target](Obsolete, use dsync instead) Synchronize the contents of two directories. The directory can either be local or remote, but currently, it doesn't support two local directories. This command simply invoke get/put/mv commands.
s4cmd cp [source] [target]Copy a file or a directory from a S3 location to another.
s4cmd mv [source] [target]Move a file or a directory from a S3 location to another.
s4cmd del [path]Delete files or directories on S3.
s4cmd du [path]Get the size of the given directory.
Available parameters:
-p S3CFG, --config=[filename]path to s3cfg config file
-f, --forceforce overwrite files when download or upload
-r, --recursiverecursively checking subdirectories
-s, --sync-checkcheck file md5 before download or upload
-n, --dry-runtrial run without actual download or upload
-t RETRY, --retry=[integer]number of retries before giving up
--retry-delay=[integer]seconds to sleep between retries
-c NUM_THREADS, --num-threads=NUM_THREADSnumber of concurrent threads
--endpoint-urlendpoint url used in boto3 client
-d, --show-directoryshow directory instead of its content
--ignore-empty-sourceignore empty source from s3
--use-ssl(obsolete) use SSL connection to S3
--verboseverbose output
--debugdebug output
--validate(obsolete) validate lookup operation
-D, --delete-removeddelete remote files that do not exist in source after sync
--multipart-split-size=[integer]size in bytes to split multipart transfers
--max-singlepart-download-size=[integer]files with size (in bytes) greater than this will be downloaded in multipart transfers
--max-singlepart-upload-size=[integer]files with size (in bytes) greater than this will be uploaded in multipart transfers
--max-singlepart-copy-size=[integer]files with size (in bytes) greater than this will be copied in multipart transfers
--batch-delete-size=[integer]Number of files (<1000) to be combined in batch delete.
--last-modified-before=[datetime]Condition on files where their last modified dates are before given parameter.
--last-modified-after=[datetime]Condition on files where their last modified dates are after given parameter.
Those options are directly translated to boto3 API commands. The options provided will be filtered by the APIs that are taking parameters. For example, --API-ServerSideEncryption is only needed for put_object, create_multipart_upload but not for list_buckets and get_objects for example. Therefore, providing --API-ServerSideEncryption for s4cmd ls has no effect.
For more information, please see boto3 s3 documentations http://boto3.readthedocs.io/en/latest/reference/services/s3.html
--API-ACL=[string]The canned ACL to apply to the object.
--API-CacheControl=[string]Specifies caching behavior along the request/reply chain.
--API-ContentDisposition=[string]Specifies presentational information for the object.
--API-ContentEncoding=[string]Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.
--API-ContentLanguage=[string]The language the content is in.
--API-ContentMD5=[string]The base64-encoded 128-bit MD5 digest of the part data.
--API-ContentType=[string]A standard MIME type describing the format of the object data.
--API-CopySourceIfMatch=[string]Copies the object if its entity tag (ETag) matches the specified tag.
--API-CopySourceIfModifiedSince=[datetime]Copies the object if it has been modified since the specified time.
--API-CopySourceIfNoneMatch=[string]Copies the object if its entity tag (ETag) is different than the specified ETag.
--API-CopySourceIfUnmodifiedSince=[datetime]Copies the object if it hasn't been modified since the specified time.
--API-CopySourceRange=[string]The range of bytes to copy from the source object. The range value must use the form bytes=first-last, where the first and last are the zero-based byte offsets to copy. For example, bytes=0-9 indicates that you want to copy the first ten bytes of the source. You can copy a range only if the source object is greater than 5 GB.
--API-CopySourceSSECustomerAlgorithm=[string]Specifies the algorithm to use when decrypting the source object (e.g., AES256).
--API-CopySourceSSECustomerKeyMD5=[string]Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure the encryption key was transmitted without error. Please note that this parameter is automatically populated if it is not provided. Including this parameter is not required
--API-CopySourceSSECustomerKey=[string]Specifies the customer-provided encryption key for Amazon S3 to use to decrypt the source object. The encryption key provided in this header must be one that was used when the source object was created.
--API-ETag=[string]Entity tag returned when the part was uploaded.
--API-Expires=[datetime]The date and time at which the object is no longer cacheable.
--API-GrantFullControl=[string]Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.
--API-GrantReadACP=[string]Allows grantee to read the object ACL.
--API-GrantRead=[string]Allows grantee to read the object data and its metadata.
--API-GrantWriteACP=[string]Allows grantee to write the ACL for the applicable object.
--API-IfMatch=[string]Return the object only if its entity tag (ETag) is the same as the one specified, otherwise return a 412 (precondition failed).
--API-IfModifiedSince=[datetime]Return the object only if it has been modified since the specified time, otherwise return a 304 (not modified).
--API-IfNoneMatch=[string]Return the object only if its entity tag (ETag) is different from the one specified, otherwise return a 304 (not modified).
--API-IfUnmodifiedSince=[datetime]Return the object only if it has not been modified since the specified time, otherwise return a 412 (precondition failed).
--API-Metadata=[dict]A map (in json string) of metadata to store with the object in S3
--API-MetadataDirective=[string]Specifies whether the metadata is copied from the source object or replaced with metadata provided in the request.
--API-MFA=[string]The concatenation of the authentication device's serial number, a space, and the value that is displayed on your authentication device.
--API-RequestPayer=[string]Confirms that the requester knows that she or he will be charged for the request. Bucket owners need not specify this parameter in their requests. Documentation on downloading objects from requester pays buckets can be found at http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html
--API-ServerSideEncryption=[string]The Server-side encryption algorithm used when storing this object in S3 (e.g., AES256, aws:kms).
--API-SSECustomerAlgorithm=[string]Specifies the algorithm to use to when encrypting the object (e.g., AES256).
--API-SSECustomerKeyMD5=[string]Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure the encryption key was transmitted without error. Please note that this parameter is automatically populated if it is not provided. Including this parameter is not required
--API-SSECustomerKey=[string]Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header.
--API-SSEKMSKeyId=[string]Specifies the AWS KMS key ID to use for object encryption. All GET and PUT requests for an object protected by AWS KMS will fail if not made via SSL or using SigV4. Documentation on configuring any of the officially supported AWS SDKs and CLI can be found at http://docs.aws.amazon.com/AmazonS3/latest/dev/UsingAWSSDK.html#specify-signature-version
--API-StorageClass=[string]The type of storage to use for the object. Defaults to 'STANDARD'.
--API-VersionId=[string]VersionId used to reference a specific version of the object.
--API-WebsiteRedirectLocation=[string]If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.
Simply enable --debug option to see the full log of s4cmd. If you even need to check what APIs are invoked from s4cmd to boto3, you can run:
s4cmd --debug [op] .... 2>&1 >/dev/null | grep S3APICALL
To see all the parameters sending to S3 API.
Prefix matching: In s3cmd, unlike traditional filesystems, prefix names match listings:
>> s3cmd ls s3://my-bucket/ch
s3://my-bucket/charlie/
s3://my-bucket/chyang/
In s4cmd, behavior is the same as with a Unix shell:
>>s4cmd ls s3://my-bucket/ch
>(empty)
To get prefix behavior, use explicit wildcards instead: s4cmd ls s3://my-bucket/ch*
Similarly, sync and cp commands emulate the Unix cp command, so directory to directory sync use different syntax:
>> s3cmd sync s3://bucket/path/dirA s3://bucket/path/dirB/
will copy contents in dirA to dirB.
>> s4cmd sync s3://bucket/path/dirA s3://bucket/path/dirB/
will copy dirA into dirB.
To achieve the s3cmd behavior, use wildcards:
s4cmd sync s3://bucket/path/dirA/* s3://bucket/path/dirB/
Note s4cmd doesn't support dirA without trailing slash indicating dirA/* as what rsync supported.
No automatic override for put command: s3cmd put fileA s3://bucket/path/fileB will return error if fileB exists. Use -f as well as get command.
Bugfixes for handling of non-existent paths: Often s3cmd creates empty files when specified paths do not exist: s3cmd get s3://my-bucket/no_such_file downloads an empty file. s4cmd get s3://my-bucket/no_such_file returns an error. s3cmd put no_such_file s3://my-bucket/ uploads an empty file. s4cmd put no_such_file s3://my-bucket/ returns an error.
Etags, MD5s and multi-part uploads: Traditionally, the etag of an object in S3 has been its MD5. However, this changed with the introduction of S3 multi-part uploads; in this case the etag is still a unique ID, but it is not the MD5 of the file. Amazon has not revealed the definition of the etag in this case, so there is no way we can calculate and compare MD5s based on the etag header in general. The workaround we use is to upload the MD5 as a supplemental content header (called "md5", instead of "etag"). This enables s4cmd to check the MD5 hash before upload or download. The only limitation is that this only works for files uploaded via s4cmd. Programs that do not understand this header will still have to download and verify the MD5 directly.
FAQs
Super S3 command line tool
We found that s4cmd demonstrated a healthy version release cadence and project activity because the last version was released less than a year ago. It has 3 open source maintainers collaborating on the project.
Did you know?
Socket for GitHub automatically highlights issues in each pull request and monitors the health of all your open source dependencies. Discover the contents of your packages and block harmful activity before you install or update your dependencies.
Security News
PyPI confirms no security flaws were exploited in the Ultralytics supply chain attack and highlights improvements for safer package publishing.
Security News
Research
The Socket Research Team breaks down a malicious wrapper package that uses obfuscation to harvest credentials and exfiltrate sensitive data.
Research
Security News
Attackers used a malicious npm package typosquatting a popular ESLint plugin to steal sensitive data, execute commands, and exploit developer systems.