volttron-log-statistics

volttron-log-statistics

The Log Statistics agent periodically reads ".log" files based on the configured interval, computes the size delta from the previous interval and publishes the difference in bytes with a timestamp. It also publishes the standard deviation and mean of the size delta every 24 hours. This agent can be useful for detecting unexpected changes to the system which may be an indication of some sort of failure or breach.

Requires

• python >= 3.10
• volttron >= 10.0

Installation

Before installing, VOLTTRON should be installed and running. Its virtual environment should be active. Information on how to install of the VOLTTRON platform can be found here.

Create a directory called config and use the change directory command to enter it.

mkdir config
cd config

After entering the config directory, create a file called log_stat_config.json. Use the below configuration section to populate your new file.

Configuration

The Log Statistics agent has 4 configuration parameters, all of which are required:

• file_path: The file path to the log file. If no config provided, defaults to 'volttron.log' located within your VOLTTRON_HOME environment variable.
• analysis_interval_secs: The interval in seconds between publishes of the size delta statistic to the message bus. If no config provided, defaults to 60 seconds.
• publish_topic: Used to specify a topic to publish log statistics to which does not get captured by the historian framework (topics not prefixed by any of: "datalogger", "record", "analysis", "devices"). If no config provided, defaults to "platform/log_statistics".
• historian_topic: Can be used to specify a topic to publish log statistics to which gets captured by the historian framework ("datalogger", "record", "analysis", "devices"). If no config provided, defaults to record/log_statistics.
• unit: Can be used to specify units. Defaults to bytes.
  • "bytes"
  • "kb"
  • "mb"
  • "gb"

Here is an example configuration file named log_stat_config.json.

{
  "analysis_interval_sec": 60,
  "file_path": "path/to/.log",
  "historian_topic": "analysis/log_statistics",
  "publish_topic": "platform/log_statistics",
  "unit": "bytes"
}

Store the configuration in the config store

vctl config store platform.log_statistics config /path/to/config

Install and start the log statistics agent

vctl install volttron-log-statistics --vip-identity platform.log_statistics --start

View the status of the installed agent.

vctl status

Development

Please see the following for contributing guidelines contributing.

Please see the following helpful guide about developing modular VOLTTRON agents

Disclaimer Notice

This material was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor the United States Department of Energy, nor Battelle, nor any of their employees, nor any jurisdiction or organization that has cooperated in the development of these materials, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness or any information, apparatus, product, software, or process disclosed, or represents that its use would not infringe privately owned rights.

Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof, or Battelle Memorial Institute. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.