jackowayed-tyrantmanager

== Tyrant Manager

• Homepage[http://copiousfreetime.rubyforge.org/tyrantmanager]
• {Rubyforge project}[http://rubyforge.org/projects/copiousfreetime/]
• email jeremy at copiousfreetime dot org
• github[http://github.com/copiousfreetime/tyrantmanager]
• git clone git://github.com/copiousfreetime/tyrantmanager.git

== INSTALLATION

sudo gem install tyrantmanager

== SYNOPSIS

tyrantmanager (setup|create-instance|start|stop|status|stats|list) [options]+

== DESCRIPTION

A command line tool for managing Tokyo Tyrant instances. It allows for the creation, starting, stopping, listing, stating of many tokyo tyrant instances all on the same machine. The commands can be applied to a single or multiple instances.

=== Setup a manager home

After installing the gem, you need to setup a tyrant manager home, all the tyrant instances are initially relative to this location.

jeremy@playground:~ % tyrantmanager setup /tmp/tyrant 00:09:06 INFO : Creating directory /tmp/tyrant 00:09:06 INFO : Creating default config file /tmp/tyrant/config.rb 00:09:06 INFO : Creating directory /tmp/tyrant/instances 00:09:06 INFO : Creating directory /tmp/tyrant/log 00:09:06 INFO : Creating directory /tmp/tyrant/tmp

Once the manager home is setup, all other commands need to know about it. This can be achieved in 3 ways.

• use the --home option on all commands
• set the TYRANT_MANAGER_HOME environment variable
• execute the commands when the current working directory is the tyrant home.

=== Creating a new tyrant instance

Each instances is separate, yet initially relative to to the tyrant manager's home.

jeremy@playground:/tmp/tyrant % tyrantmanager create-instance foo
00:17:55  INFO : Creating instance directory /tmp/tyrant/instances/foo
00:17:55  INFO : Creating directory /tmp/tyrant/instances/foo
00:17:55  INFO : Creating default config file /tmp/tyrant/instances/foo/config.rb
00:17:55  INFO : Creating directory /tmp/tyrant/instances/foo/ulog
00:17:55  INFO : Creating directory /tmp/tyrant/instances/foo/data
00:17:55  INFO : Creating directory /tmp/tyrant/instances/foo/lua
00:17:55  INFO : Creating directory /tmp/tyrant/instances/foo/log

This creates a new tyrant instance in the instances directory. There are several subdirectories created for you automatically.

• data - the actual data file location
• ulog - where the update logs are kept
• log - the server logs
• lua - default location for lua code

=== Configuring an instance

Configuration of a Tyrant instances is in the 'config.rb' file in the instances home directory. This all the configuration items that are specific to that instance. Take a look through the file, or just execute it to see a nicely formatted output of all the current configuration parameters, descriptions, and current values. This example just highlights a few of the options.

jeremy@playground:/tmp/tyrant/instances/foo % ruby config.rb 
The directory holding the database file.  By default this is relative
to the instance directory.  If you want to put it somewhere else, then
put the full path here.
  - data_dir                   => "data"

The hostname this instance will listen on. The default is all
  - host                       => "0.0.0.0"

[...]

Mode of the server in relation to the database.  It can be a combination of 
the following:
     w - it is a database writer
     r - it is a database reader
     c - it creates the database if it does not exist
     t - it truncates the database if it does exist
     e - do not lock the database when doing operations
     f - use a non-blocking lock when doing operations
  - mode                       => "wc"

The options for data stored in the database.  They include one of the 
compression options:
     d - Deflate
     b - BZIP2
     t - TCBS 
 and 
     l - allow the database to be larger than 2GB
  - opts                       => "ld"

[...]

The type of database this instance will be.  Options are:
     memory-hash - an in memory hash database
     memory-tree - an in memory B+ tree database
     hash        - an on disk hash database
     tree        - an on disk B+ tree database
     fixed       - an on disk fixed length database
     table       - an on disk table database
  - type                       => "hash"

There are also configuration items in the 'config.rb' in the Manager's home directory. These are global defaults for all instances the manager knows about, and may be overridden in the instance's 'config.rb' file. Again, just execute the configuration file to see all the options, their current set values and the documentation.

jeremy@playground:/tmp/tyrant % ruby config.rb 
The top directory of the manager directory.  This is set with the 
--directory option or it can be set here"
  - home                               => nil

Default settings for tyrant instances.  If a tyrant does not explicitly set one of 
these configurations then the default listed here is used.  This does not list all
of the configuration variables, only those that make sense to have defaults for.
  - instance_defaults

[...]   

 Run daemonized
  - instance_defaults.daemonize        => true

[...]

The list of locations that contain Tyrant instances.  Each element in this array
either a directory containing instance directories, or an instance directory itself.
Tyrant Manager will figure out what the case is.  If this is unset, then the default
'instances' directory below the manager's home directory is used.
  - instances                          => nil

The 'ttserver' command.  This will use the first one found in path by default
or you may explicitly set it here.
  - ttserver                           => "ttserver"

There are a considerable number of configuration options for Tokyo Tyrant and I've done my best to document all of them.

If you do have more than one instance on a single machine, you'll need to make sure to change the port option, otherwise only one instance will run.

desc "The port this tyrant will listen on.  The default is 1978"
port 1978

=== Listing, Controlling instances and Seeing their status

Instances may be started and stopped all at once, or individually. On startup, the ttserver command line that was used is output.

==== List known instances

jeremy@playground:/tmp/tyrant % tyrantmanager list
             bar : port 1979 : /tmp/tyrant/instances/bar
             baz : port 1980 : /tmp/tyrant/instances/baz
             foo : port 1978 : /tmp/tyrant/instances/foo

==== Start all

jeremy@playground:/tmp/tyrant % tyrantmanager start
00:51:15  INFO : Starting bar : ttserver -host 0.0.0.0 -port 1979 -thnum 8 -tout 15 -dmn -pid /tmp/tyrant/instances/bar/bar.pid -log /tmp/tyrant/instances/bar/log/bar.log -le -ulog /tmp/tyrant/instances/bar/ulog -ulim 1g -rts /tmp/tyrant/instances/bar/bar.rts /tmp/tyrant/instances/bar/data/bar.tch#opts=ld#mode=wc
00:51:15  INFO : 
00:51:15  INFO : Starting baz : ttserver -host 0.0.0.0 -port 1980 -thnum 8 -tout 15 -dmn -pid /tmp/tyrant/instances/baz/baz.pid -log /tmp/tyrant/instances/baz/log/baz.log -le -ulog /tmp/tyrant/instances/baz/ulog -ulim 1g -rts /tmp/tyrant/instances/baz/baz.rts /tmp/tyrant/instances/baz/data/baz.tch#opts=ld#mode=wc
00:51:15  INFO : 
00:51:15  INFO : Starting foo : ttserver -host 0.0.0.0 -port 1978 -thnum 8 -tout 15 -dmn -pid /tmp/tyrant/instances/foo/foo.pid -log /tmp/tyrant/instances/foo/log/foo.log -le -ulog /tmp/tyrant/instances/foo/ulog -ulim 1g -rts /tmp/tyrant/instances/foo/foo.rts /tmp/tyrant/instances/foo/data/foo.tch#opts=ld#mode=wc
00:51:15  INFO : 

As you can see the commandline used to start the tyrant server is output.

jeremy@playground:/tmp/tyrant % tyrantmanager status
00:52:17  INFO : bar is running as pid 28658
00:52:17  INFO : baz is running as pid 28670
00:52:17  INFO : foo is running as pid 28682

==== Stop all

jeremy@playground:/tmp/tyrant % tyrantmanager stop all
00:52:40  INFO : Stopping bar : pid 28658
00:52:40  INFO : Sent signal TERM to 28658
00:52:40  INFO : Stopping baz : pid 28670
00:52:40  INFO : Sent signal TERM to 28670
00:52:40  INFO : Stopping foo : pid 28682
00:52:40  INFO : Sent signal TERM to 28682

And see that they are all done

jeremy@playground:/tmp/tyrant % tyrantmanager status
00:53:15  INFO : bar is not running, or its pid file is gone
00:53:15  INFO : baz is not running, or its pid file is gone
00:53:15  INFO : foo is not running, or its pid file is gone

==== Start just foo and baz

jeremy@playground:/tmp/tyrant % tyrantmanager start foo,baz
00:53:54  INFO : Starting baz : ttserver -host 0.0.0.0 -port 1980 -thnum 8 -tout 15 -dmn -pid /tmp/tyrant/instances/baz/baz.pid -log /tmp/tyrant/instances/baz/log/baz.log -le -ulog /tmp/tyrant/instances/baz/ulog -ulim 1g -rts /tmp/tyrant/instances/baz/baz.rts /tmp/tyrant/instances/baz/data/baz.tch#opts=ld#mode=wc
00:53:54  INFO : 
00:53:54  INFO : Starting foo : ttserver -host 0.0.0.0 -port 1978 -thnum 8 -tout 15 -dmn -pid /tmp/tyrant/instances/foo/foo.pid -log /tmp/tyrant/instances/foo/log/foo.log -le -ulog /tmp/tyrant/instances/foo/ulog -ulim 1g -rts /tmp/tyrant/instances/foo/foo.rts /tmp/tyrant/instances/foo/data/foo.tch#opts=ld#mode=wc
00:53:54  INFO : 

Foo and baz are started, bar is still stopped

jeremy@playground:/tmp/tyrant % tyrantmanager status
00:54:38  INFO : bar is not running, or its pid file is gone
00:54:38  INFO : baz is running as pid 28708
00:54:38  INFO : foo is running as pid 28720

=== Stop just foo

jeremy@playground:/tmp/tyrant % tyrantmanager stop foo
00:55:33  INFO : Stopping foo : pid 28720
00:55:33  INFO : Sent signal TERM to 28720

And baz is still running

jeremy@playground:/tmp/tyrant % tyrantmanager status
00:55:51  INFO : bar is not running, or its pid file is gone
00:55:51  INFO : baz is running as pid 28708
00:55:51  INFO : foo is not running, or its pid file is gone

=== Look at the server statistics

You can also look at the server statistics of each running instance

jeremy@playground:/tmp/tyrant % tyrantmanager stats
Instance bar at /tmp/tyrant/instances/bar
    bigend.... 0
    fd........ 7
    libver.... 312
    loadavg... 0.030000
    memrss.... 1003520
    memsize... 173633536
    os........ Linux
    path...... /tmp/tyrant/instances/bar/data/bar.tch
    pid....... 28749
    protver... 0.91
    rnum...... 0
    ru_real... 14.560829
    ru_sys.... 0.000000
    ru_user... 0.004000
    sid....... 72615862
    size...... 1052992
    time...... 1249174632.207222
    type...... hash
    version... 1.1.29
[...]

== CREDITS

• Inspired by the {Light Cloud}[http://opensource.plurk.com/LightCloud/Tyrant_manager/] tyrant manager
• {Tokyo Tyrant}[http://tokyocabinet.sourceforge.net/tyrantdoc/]

== LICENSE

Copyright (c) 2009, Jeremy Hinegardner

Permission to use, copy, modify, and/or distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.

THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.