System

github.com/gorilla/websocket

Package websocket implements the WebSocket protocol defined in RFC 6455. The Conn type represents a WebSocket connection. A server application calls the Upgrader.Upgrade method from an HTTP request handler to get a *Conn: Call the connection's WriteMessage and ReadMessage methods to send and receive messages as a slice of bytes. This snippet of code shows how to echo messages using these methods: In above snippet of code, p is a []byte and messageType is an int with value websocket.BinaryMessage or websocket.TextMessage. An application can also send and receive messages using the io.WriteCloser and io.Reader interfaces. To send a message, call the connection NextWriter method to get an io.WriteCloser, write the message to the writer and close the writer when done. To receive a message, call the connection NextReader method to get an io.Reader and read until io.EOF is returned. This snippet shows how to echo messages using the NextWriter and NextReader methods: The WebSocket protocol distinguishes between text and binary data messages. Text messages are interpreted as UTF-8 encoded text. The interpretation of binary messages is left to the application. This package uses the TextMessage and BinaryMessage integer constants to identify the two data message types. The ReadMessage and NextReader methods return the type of the received message. The messageType argument to the WriteMessage and NextWriter methods specifies the type of a sent message. It is the application's responsibility to ensure that text messages are valid UTF-8 encoded text. The WebSocket protocol defines three types of control messages: close, ping and pong. Call the connection WriteControl, WriteMessage or NextWriter methods to send a control message to the peer. Connections handle received close messages by calling the handler function set with the SetCloseHandler method and by returning a *CloseError from the NextReader, ReadMessage or the message Read method. The default close handler sends a close message to the peer. Connections handle received ping messages by calling the handler function set with the SetPingHandler method. The default ping handler sends a pong message to the peer. Connections handle received pong messages by calling the handler function set with the SetPongHandler method. The default pong handler does nothing. If an application sends ping messages, then the application should set a pong handler to receive the corresponding pong. The control message handler functions are called from the NextReader, ReadMessage and message reader Read methods. The default close and ping handlers can block these methods for a short time when the handler writes to the connection. The application must read the connection to process close, ping and pong messages sent from the peer. If the application is not otherwise interested in messages from the peer, then the application should start a goroutine to read and discard messages from the peer. A simple example is: Connections support one concurrent reader and one concurrent writer. Applications are responsible for ensuring that no more than one goroutine calls the write methods (NextWriter, SetWriteDeadline, WriteMessage, WriteJSON, EnableWriteCompression, SetCompressionLevel) concurrently and that no more than one goroutine calls the read methods (NextReader, SetReadDeadline, ReadMessage, ReadJSON, SetPongHandler, SetPingHandler) concurrently. The Close and WriteControl methods can be called concurrently with all other methods. Web browsers allow Javascript applications to open a WebSocket connection to any host. It's up to the server to enforce an origin policy using the Origin request header sent by the browser. The Upgrader calls the function specified in the CheckOrigin field to check the origin. If the CheckOrigin function returns false, then the Upgrade method fails the WebSocket handshake with HTTP status 403. If the CheckOrigin field is nil, then the Upgrader uses a safe default: fail the handshake if the Origin request header is present and the Origin host is not equal to the Host request header. The deprecated package-level Upgrade function does not perform origin checking. The application is responsible for checking the Origin header before calling the Upgrade function. Connections buffer network input and output to reduce the number of system calls when reading or writing messages. Write buffers are also used for constructing WebSocket frames. See RFC 6455, Section 5 for a discussion of message framing. A WebSocket frame header is written to the network each time a write buffer is flushed to the network. Decreasing the size of the write buffer can increase the amount of framing overhead on the connection. The buffer sizes in bytes are specified by the ReadBufferSize and WriteBufferSize fields in the Dialer and Upgrader. The Dialer uses a default size of 4096 when a buffer size field is set to zero. The Upgrader reuses buffers created by the HTTP server when a buffer size field is set to zero. The HTTP server buffers have a size of 4096 at the time of this writing. The buffer sizes do not limit the size of a message that can be read or written by a connection. Buffers are held for the lifetime of the connection by default. If the Dialer or Upgrader WriteBufferPool field is set, then a connection holds the write buffer only when writing a message. Applications should tune the buffer sizes to balance memory use and performance. Increasing the buffer size uses more memory, but can reduce the number of system calls to read or write the network. In the case of writing, increasing the buffer size can reduce the number of frame headers written to the network. Some guidelines for setting buffer parameters are: Limit the buffer sizes to the maximum expected message size. Buffers larger than the largest message do not provide any benefit. Depending on the distribution of message sizes, setting the buffer size to a value less than the maximum expected message size can greatly reduce memory use with a small impact on performance. Here's an example: If 99% of the messages are smaller than 256 bytes and the maximum message size is 512 bytes, then a buffer size of 256 bytes will result in 1.01 more system calls than a buffer size of 512 bytes. The memory savings is 50%. A write buffer pool is useful when the application has a modest number writes over a large number of connections. when buffers are pooled, a larger buffer size has a reduced impact on total memory use and has the benefit of reducing system calls and frame overhead. Per message compression extensions (RFC 7692) are experimentally supported by this package in a limited capacity. Setting the EnableCompression option to true in Dialer or Upgrader will attempt to negotiate per message deflate support. If compression was successfully negotiated with the connection's peer, any message received in compressed form will be automatically decompressed. All Read methods will return uncompressed bytes. Per message compression of messages written to a connection can be enabled or disabled by calling the corresponding Conn method: Currently this package does not support compression with "context takeover". This means that messages must be compressed and decompressed in isolation, without retaining sliding window or dictionary state across messages. For more details refer to RFC 7692. Use of compression is experimental and may result in decreased performance.

v1.5.3 • 8 months ago

github.com/go-playground/validator/v10

Package validator implements value validations for structs and individual fields based on tags. It can also handle Cross-Field and Cross-Struct validation for nested structs and has the ability to dive into arrays and maps of any type. see more examples https://github.com/go-playground/validator/tree/master/_examples Validator is designed to be thread-safe and used as a singleton instance. It caches information about your struct and validations, in essence only parsing your validation tags once per struct type. Using multiple instances neglects the benefit of caching. The not thread-safe functions are explicitly marked as such in the documentation. Doing things this way is actually the way the standard library does, see the file.Open method here: The authors return type "error" to avoid the issue discussed in the following, where err is always != nil: Validator only InvalidValidationError for bad validation input, nil or ValidationErrors as type error; so, in your code all you need to do is check if the error returned is not nil, and if it's not check if error is InvalidValidationError ( if necessary, most of the time it isn't ) type cast it to type ValidationErrors like so err.(validator.ValidationErrors). Custom Validation functions can be added. Example: Cross-Field Validation can be done via the following tags: If, however, some custom cross-field validation is required, it can be done using a custom validation. Why not just have cross-fields validation tags (i.e. only eqcsfield and not eqfield)? The reason is efficiency. If you want to check a field within the same struct "eqfield" only has to find the field on the same struct (1 level). But, if we used "eqcsfield" it could be multiple levels down. Example: Multiple validators on a field will process in the order defined. Example: Bad Validator definitions are not handled by the library. Example: Baked In Cross-Field validation only compares fields on the same struct. If Cross-Field + Cross-Struct validation is needed you should implement your own custom validator. Comma (",") is the default separator of validation tags. If you wish to have a comma included within the parameter (i.e. excludesall=,) you will need to use the UTF-8 hex representation 0x2C, which is replaced in the code as a comma, so the above will become excludesall=0x2C. Pipe ("|") is the 'or' validation tags deparator. If you wish to have a pipe included within the parameter i.e. excludesall=| you will need to use the UTF-8 hex representation 0x7C, which is replaced in the code as a pipe, so the above will become excludesall=0x7C Here is a list of the current built in validators: Tells the validation to skip this struct field; this is particularly handy in ignoring embedded structs from being validated. (Usage: -) This is the 'or' operator allowing multiple validators to be used and accepted. (Usage: rgb|rgba) <-- this would allow either rgb or rgba colors to be accepted. This can also be combined with 'and' for example ( Usage: omitempty,rgb|rgba) When a field that is a nested struct is encountered, and contains this flag any validation on the nested struct will be run, but none of the nested struct fields will be validated. This is useful if inside of your program you know the struct will be valid, but need to verify it has been assigned. NOTE: only "required" and "omitempty" can be used on a struct itself. Same as structonly tag except that any struct level validations will not run. Allows conditional validation, for example if a field is not set with a value (Determined by the "required" validator) then other validation such as min or max won't run, but if a value is set validation will run. Allows to skip the validation if the value is nil (same as omitempty, but only for the nil-values). This tells the validator to dive into a slice, array or map and validate that level of the slice, array or map with the validation tags that follow. Multidimensional nesting is also supported, each level you wish to dive will require another dive tag. dive has some sub-tags, 'keys' & 'endkeys', please see the Keys & EndKeys section just below. Example #1 Example #2 Keys & EndKeys These are to be used together directly after the dive tag and tells the validator that anything between 'keys' and 'endkeys' applies to the keys of a map and not the values; think of it like the 'dive' tag, but for map keys instead of values. Multidimensional nesting is also supported, each level you wish to validate will require another 'keys' and 'endkeys' tag. These tags are only valid for maps. Example #1 Example #2 This validates that the value is not the data types default zero value. For numbers ensures value is not zero. For strings ensures value is not "". For booleans ensures value is not false. For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. For structs ensures value is not the zero value when using WithRequiredStructEnabled. The field under validation must be present and not empty only if all the other specified fields are equal to the value following the specified field. For strings ensures value is not "". For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. For structs ensures value is not the zero value. Examples: The field under validation must be present and not empty unless all the other specified fields are equal to the value following the specified field. For strings ensures value is not "". For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. For structs ensures value is not the zero value. Examples: The field under validation must be present and not empty only if any of the other specified fields are present. For strings ensures value is not "". For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. For structs ensures value is not the zero value. Examples: The field under validation must be present and not empty only if all of the other specified fields are present. For strings ensures value is not "". For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. For structs ensures value is not the zero value. Example: The field under validation must be present and not empty only when any of the other specified fields are not present. For strings ensures value is not "". For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. For structs ensures value is not the zero value. Examples: The field under validation must be present and not empty only when all of the other specified fields are not present. For strings ensures value is not "". For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. For structs ensures value is not the zero value. Example: The field under validation must not be present or not empty only if all the other specified fields are equal to the value following the specified field. For strings ensures value is not "". For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. For structs ensures value is not the zero value. Examples: The field under validation must not be present or empty unless all the other specified fields are equal to the value following the specified field. For strings ensures value is not "". For slices, maps, pointers, interfaces, channels and functions ensures the value is not nil. For structs ensures value is not the zero value. Examples: This validates that the value is the default value and is almost the opposite of required. For numbers, length will ensure that the value is equal to the parameter given. For strings, it checks that the string length is exactly that number of characters. For slices, arrays, and maps, validates the number of items. Example #1 Example #2 (time.Duration) For time.Duration, len will ensure that the value is equal to the duration given in the parameter. For numbers, max will ensure that the value is less than or equal to the parameter given. For strings, it checks that the string length is at most that number of characters. For slices, arrays, and maps, validates the number of items. Example #1 Example #2 (time.Duration) For time.Duration, max will ensure that the value is less than or equal to the duration given in the parameter. For numbers, min will ensure that the value is greater or equal to the parameter given. For strings, it checks that the string length is at least that number of characters. For slices, arrays, and maps, validates the number of items. Example #1 Example #2 (time.Duration) For time.Duration, min will ensure that the value is greater than or equal to the duration given in the parameter. For strings & numbers, eq will ensure that the value is equal to the parameter given. For slices, arrays, and maps, validates the number of items. Example #1 Example #2 (time.Duration) For time.Duration, eq will ensure that the value is equal to the duration given in the parameter. For strings & numbers, ne will ensure that the value is not equal to the parameter given. For slices, arrays, and maps, validates the number of items. Example #1 Example #2 (time.Duration) For time.Duration, ne will ensure that the value is not equal to the duration given in the parameter. For strings, ints, and uints, oneof will ensure that the value is one of the values in the parameter. The parameter should be a list of values separated by whitespace. Values may be strings or numbers. To match strings with spaces in them, include the target string between single quotes. Kind of like an 'enum'. Works the same as oneof but is case insensitive and therefore only accepts strings. For numbers, this will ensure that the value is greater than the parameter given. For strings, it checks that the string length is greater than that number of characters. For slices, arrays and maps it validates the number of items. Example #1 Example #2 (time.Time) For time.Time ensures the time value is greater than time.Now.UTC(). Example #3 (time.Duration) For time.Duration, gt will ensure that the value is greater than the duration given in the parameter. Same as 'min' above. Kept both to make terminology with 'len' easier. Example #1 Example #2 (time.Time) For time.Time ensures the time value is greater than or equal to time.Now.UTC(). Example #3 (time.Duration) For time.Duration, gte will ensure that the value is greater than or equal to the duration given in the parameter. For numbers, this will ensure that the value is less than the parameter given. For strings, it checks that the string length is less than that number of characters. For slices, arrays, and maps it validates the number of items. Example #1 Example #2 (time.Time) For time.Time ensures the time value is less than time.Now.UTC(). Example #3 (time.Duration) For time.Duration, lt will ensure that the value is less than the duration given in the parameter. Same as 'max' above. Kept both to make terminology with 'len' easier. Example #1 Example #2 (time.Time) For time.Time ensures the time value is less than or equal to time.Now.UTC(). Example #3 (time.Duration) For time.Duration, lte will ensure that the value is less than or equal to the duration given in the parameter. This will validate the field value against another fields value either within a struct or passed in field. Example #1: Example #2: Field Equals Another Field (relative) This does the same as eqfield except that it validates the field provided relative to the top level struct. This will validate the field value against another fields value either within a struct or passed in field. Examples: Field Does Not Equal Another Field (relative) This does the same as nefield except that it validates the field provided relative to the top level struct. Only valid for Numbers, time.Duration and time.Time types, this will validate the field value against another fields value either within a struct or passed in field. usage examples are for validation of a Start and End date: Example #1: Example #2: This does the same as gtfield except that it validates the field provided relative to the top level struct. Only valid for Numbers, time.Duration and time.Time types, this will validate the field value against another fields value either within a struct or passed in field. usage examples are for validation of a Start and End date: Example #1: Example #2: This does the same as gtefield except that it validates the field provided relative to the top level struct. Only valid for Numbers, time.Duration and time.Time types, this will validate the field value against another fields value either within a struct or passed in field. usage examples are for validation of a Start and End date: Example #1: Example #2: This does the same as ltfield except that it validates the field provided relative to the top level struct. Only valid for Numbers, time.Duration and time.Time types, this will validate the field value against another fields value either within a struct or passed in field. usage examples are for validation of a Start and End date: Example #1: Example #2: This does the same as ltefield except that it validates the field provided relative to the top level struct. This does the same as contains except for struct fields. It should only be used with string types. See the behavior of reflect.Value.String() for behavior on other types. This does the same as excludes except for struct fields. It should only be used with string types. See the behavior of reflect.Value.String() for behavior on other types. For arrays & slices, unique will ensure that there are no duplicates. For maps, unique will ensure that there are no duplicate values. For slices of struct, unique will ensure that there are no duplicate values in a field of the struct specified via a parameter. This validates that a string value contains ASCII alpha characters only This validates that a string value contains ASCII alphanumeric characters only This validates that a string value contains unicode alpha characters only This validates that a string value contains unicode alphanumeric characters only This validates that a string value can successfully be parsed into a boolean with strconv.ParseBool This validates that a string value contains number values only. For integers or float it returns true. This validates that a string value contains a basic numeric value. basic excludes exponents etc... for integers or float it returns true. This validates that a string value contains a valid hexadecimal. This validates that a string value contains a valid hex color including hashtag (#) This validates that a string value contains only lowercase characters. An empty string is not a valid lowercase string. This validates that a string value contains only uppercase characters. An empty string is not a valid uppercase string. This validates that a string value contains a valid rgb color This validates that a string value contains a valid rgba color This validates that a string value contains a valid hsl color This validates that a string value contains a valid hsla color This validates that a string value contains a valid E.164 Phone number https://en.wikipedia.org/wiki/E.164 (ex. +1123456789) This validates that a string value contains a valid email This may not conform to all possibilities of any rfc standard, but neither does any email provider accept all possibilities. This validates that a string value is valid JSON This validates that a string value is a valid JWT This validates that a string value contains a valid file path and that the file exists on the machine. This is done using os.Stat, which is a platform independent function. This validates that a string value contains a valid file path and that the file exists on the machine and is an image. This is done using os.Stat and github.com/gabriel-vasile/mimetype This validates that a string value contains a valid file path but does not validate the existence of that file. This is done using os.Stat, which is a platform independent function. This validates that a string value contains a valid url This will accept any url the golang request uri accepts but must contain a schema for example http:// or rtmp:// This validates that a string value contains a valid uri This will accept any uri the golang request uri accepts This validates that a string value contains a valid URN according to the RFC 2141 spec. This validates that a string value contains a valid bas324 value. Although an empty string is valid base32 this will report an empty string as an error, if you wish to accept an empty string as valid you can use this with the omitempty tag. This validates that a string value contains a valid base64 value. Although an empty string is valid base64 this will report an empty string as an error, if you wish to accept an empty string as valid you can use this with the omitempty tag. This validates that a string value contains a valid base64 URL safe value according the RFC4648 spec. Although an empty string is a valid base64 URL safe value, this will report an empty string as an error, if you wish to accept an empty string as valid you can use this with the omitempty tag. This validates that a string value contains a valid base64 URL safe value, but without = padding, according the RFC4648 spec, section 3.2. Although an empty string is a valid base64 URL safe value, this will report an empty string as an error, if you wish to accept an empty string as valid you can use this with the omitempty tag. This validates that a string value contains a valid bitcoin address. The format of the string is checked to ensure it matches one of the three formats P2PKH, P2SH and performs checksum validation. Bitcoin Bech32 Address (segwit) This validates that a string value contains a valid bitcoin Bech32 address as defined by bip-0173 (https://github.com/bitcoin/bips/blob/master/bip-0173.mediawiki) Special thanks to Pieter Wuille for providing reference implementations. This validates that a string value contains a valid ethereum address. The format of the string is checked to ensure it matches the standard Ethereum address format. This validates that a string value contains the substring value. This validates that a string value contains any Unicode code points in the substring value. This validates that a string value contains the supplied rune value. This validates that a string value does not contain the substring value. This validates that a string value does not contain any Unicode code points in the substring value. This validates that a string value does not contain the supplied rune value. This validates that a string value starts with the supplied string value This validates that a string value ends with the supplied string value This validates that a string value does not start with the supplied string value This validates that a string value does not end with the supplied string value This validates that a string value contains a valid isbn10 or isbn13 value. This validates that a string value contains a valid isbn10 value. This validates that a string value contains a valid isbn13 value. This validates that a string value contains a valid UUID. Uppercase UUID values will not pass - use `uuid_rfc4122` instead. This validates that a string value contains a valid version 3 UUID. Uppercase UUID values will not pass - use `uuid3_rfc4122` instead. This validates that a string value contains a valid version 4 UUID. Uppercase UUID values will not pass - use `uuid4_rfc4122` instead. This validates that a string value contains a valid version 5 UUID. Uppercase UUID values will not pass - use `uuid5_rfc4122` instead. This validates that a string value contains a valid ULID value. This validates that a string value contains only ASCII characters. NOTE: if the string is blank, this validates as true. This validates that a string value contains only printable ASCII characters. NOTE: if the string is blank, this validates as true. This validates that a string value contains one or more multibyte characters. NOTE: if the string is blank, this validates as true. This validates that a string value contains a valid DataURI. NOTE: this will also validate that the data portion is valid base64 This validates that a string value contains a valid latitude. This validates that a string value contains a valid longitude. This validates that a string value contains a valid U.S. Social Security Number. This validates that a string value contains a valid IP Address. This validates that a string value contains a valid v4 IP Address. This validates that a string value contains a valid v6 IP Address. This validates that a string value contains a valid CIDR Address. This validates that a string value contains a valid v4 CIDR Address. This validates that a string value contains a valid v6 CIDR Address. This validates that a string value contains a valid resolvable TCP Address. This validates that a string value contains a valid resolvable v4 TCP Address. This validates that a string value contains a valid resolvable v6 TCP Address. This validates that a string value contains a valid resolvable UDP Address. This validates that a string value contains a valid resolvable v4 UDP Address. This validates that a string value contains a valid resolvable v6 UDP Address. This validates that a string value contains a valid resolvable IP Address. This validates that a string value contains a valid resolvable v4 IP Address. This validates that a string value contains a valid resolvable v6 IP Address. This validates that a string value contains a valid Unix Address. This validates that a string value contains a valid MAC Address. Note: See Go's ParseMAC for accepted formats and types: This validates that a string value is a valid Hostname according to RFC 952 https://tools.ietf.org/html/rfc952 This validates that a string value is a valid Hostname according to RFC 1123 https://tools.ietf.org/html/rfc1123 Full Qualified Domain Name (FQDN) This validates that a string value contains a valid FQDN. This validates that a string value appears to be an HTML element tag including those described at https://developer.mozilla.org/en-US/docs/Web/HTML/Element This validates that a string value is a proper character reference in decimal or hexadecimal format This validates that a string value is percent-encoded (URL encoded) according to https://tools.ietf.org/html/rfc3986#section-2.1 This validates that a string value contains a valid directory and that it exists on the machine. This is done using os.Stat, which is a platform independent function. This validates that a string value contains a valid directory but does not validate the existence of that directory. This is done using os.Stat, which is a platform independent function. It is safest to suffix the string with os.PathSeparator if the directory may not exist at the time of validation. This validates that a string value contains a valid DNS hostname and port that can be used to validate fields typically passed to sockets and connections. This validates that a string value is a valid datetime based on the supplied datetime format. Supplied format must match the official Go time format layout as documented in https://golang.org/pkg/time/ This validates that a string value is a valid country code based on iso3166-1 alpha-2 standard. see: https://www.iso.org/iso-3166-country-codes.html This validates that a string value is a valid country code based on iso3166-1 alpha-3 standard. see: https://www.iso.org/iso-3166-country-codes.html This validates that a string value is a valid country code based on iso3166-1 alpha-numeric standard. see: https://www.iso.org/iso-3166-country-codes.html This validates that a string value is a valid BCP 47 language tag, as parsed by language.Parse. More information on https://pkg.go.dev/golang.org/x/text/language BIC (SWIFT code) This validates that a string value is a valid Business Identifier Code (SWIFT code), defined in ISO 9362. More information on https://www.iso.org/standard/60390.html This validates that a string value is a valid dns RFC 1035 label, defined in RFC 1035. More information on https://datatracker.ietf.org/doc/html/rfc1035 This validates that a string value is a valid time zone based on the time zone database present on the system. Although empty value and Local value are allowed by time.LoadLocation golang function, they are not allowed by this validator. More information on https://golang.org/pkg/time/#LoadLocation This validates that a string value is a valid semver version, defined in Semantic Versioning 2.0.0. More information on https://semver.org/ This validates that a string value is a valid cve id, defined in cve mitre. More information on https://cve.mitre.org/ This validates that a string value contains a valid credit card number using Luhn algorithm. This validates that a string or (u)int value contains a valid checksum using the Luhn algorithm. This validates that a string is a valid 24 character hexadecimal string or valid connection string. Example: This validates that a string value contains a valid cron expression. This validates that a string is valid for use with SpiceDb for the indicated purpose. If no purpose is given, a purpose of 'id' is assumed. Alias Validators and Tags NOTE: When returning an error, the tag returned in "FieldError" will be the alias tag unless the dive tag is part of the alias. Everything after the dive tag is not reported as the alias tag. Also, the "ActualTag" in the before case will be the actual tag within the alias that failed. Here is a list of the current built in alias tags: Validator notes: A collection of validation rules that are frequently needed but are more complex than the ones found in the baked in validators. A non standard validator must be registered manually like you would with your own custom validation functions. Example of registration and use: Here is a list of the current non standard validators: This package panics when bad input is provided, this is by design, bad code like that should not make it to production.

v10.24.0 • 4 weeks ago

github.com/robfig/cron/v3

Package cron implements a cron spec parser and job runner. To download the specific tagged release, run: Import it in your program as: It requires Go 1.11 or later due to usage of Go Modules. Callers may register Funcs to be invoked on a given schedule. Cron will run them in their own goroutines. A cron expression represents a set of times, using 5 space-separated fields. Month and Day-of-week field values are case insensitive. "SUN", "Sun", and "sun" are equally accepted. The specific interpretation of the format is based on the Cron Wikipedia page: https://en.wikipedia.org/wiki/Cron Alternative Cron expression formats support other fields like seconds. You can implement that by creating a custom Parser as follows. Since adding Seconds is the most common modification to the standard cron spec, cron provides a builtin function to do that, which is equivalent to the custom parser you saw earlier, except that its seconds field is REQUIRED: That emulates Quartz, the most popular alternative Cron schedule format: http://www.quartz-scheduler.org/documentation/quartz-2.x/tutorials/crontrigger.html Asterisk ( * ) The asterisk indicates that the cron expression will match for all values of the field; e.g., using an asterisk in the 5th field (month) would indicate every month. Slash ( / ) Slashes are used to describe increments of ranges. For example 3-59/15 in the 1st field (minutes) would indicate the 3rd minute of the hour and every 15 minutes thereafter. The form "*\/..." is equivalent to the form "first-last/...", that is, an increment over the largest possible range of the field. The form "N/..." is accepted as meaning "N-MAX/...", that is, starting at N, use the increment until the end of that specific range. It does not wrap around. Comma ( , ) Commas are used to separate items of a list. For example, using "MON,WED,FRI" in the 5th field (day of week) would mean Mondays, Wednesdays and Fridays. Hyphen ( - ) Hyphens are used to define ranges. For example, 9-17 would indicate every hour between 9am and 5pm inclusive. Question mark ( ? ) Question mark may be used instead of '*' for leaving either day-of-month or day-of-week blank. You may use one of several pre-defined schedules in place of a cron expression. You may also schedule a job to execute at fixed intervals, starting at the time it's added or cron is run. This is supported by formatting the cron spec like this: where "duration" is a string accepted by time.ParseDuration (http://golang.org/pkg/time/#ParseDuration). For example, "@every 1h30m10s" would indicate a schedule that activates after 1 hour, 30 minutes, 10 seconds, and then every interval after that. Note: The interval does not take the job runtime into account. For example, if a job takes 3 minutes to run, and it is scheduled to run every 5 minutes, it will have only 2 minutes of idle time between each run. By default, all interpretation and scheduling is done in the machine's local time zone (time.Local). You can specify a different time zone on construction: Individual cron schedules may also override the time zone they are to be interpreted in by providing an additional space-separated field at the beginning of the cron spec, of the form "CRON_TZ=Asia/Tokyo". For example: The prefix "TZ=(TIME ZONE)" is also supported for legacy compatibility. Be aware that jobs scheduled during daylight-savings leap-ahead transitions will not be run! A Cron runner may be configured with a chain of job wrappers to add cross-cutting functionality to all submitted jobs. For example, they may be used to achieve the following effects: Install wrappers for all jobs added to a cron using the `cron.WithChain` option: Install wrappers for individual jobs by explicitly wrapping them: Since the Cron service runs concurrently with the calling code, some amount of care must be taken to ensure proper synchronization. All cron methods are designed to be correctly synchronized as long as the caller ensures that invocations have a clear happens-before ordering between them. Cron defines a Logger interface that is a subset of the one defined in github.com/go-logr/logr. It has two logging levels (Info and Error), and parameters are key/value pairs. This makes it possible for cron logging to plug into structured logging systems. An adapter, [Verbose]PrintfLogger, is provided to wrap the standard library *log.Logger. For additional insight into Cron operations, verbose logging may be activated which will record job runs, scheduling decisions, and added or removed jobs. Activate it with a one-off logger as follows: Cron entries are stored in an array, sorted by their next activation time. Cron sleeps until the next job is due to be run. Upon waking:

v3.0.1 • 5 years ago

github.com/miekg/dns

Package dns implements a full featured interface to the Domain Name System. Both server- and client-side programming is supported. The package allows complete control over what is sent out to the DNS. The API follows the less-is-more principle, by presenting a small, clean interface. It supports (asynchronous) querying/replying, incoming/outgoing zone transfers, TSIG, EDNS0, dynamic updates, notifies and DNSSEC validation/signing. Note that domain names MUST be fully qualified before sending them, unqualified names in a message will result in a packing failure. Resource records are native types. They are not stored in wire format. Basic usage pattern for creating a new resource record: Or directly from a string: Or when the default origin (.) and TTL (3600) and class (IN) suit you: Or even: In the DNS messages are exchanged, these messages contain resource records (sets). Use pattern for creating a message: Or when not certain if the domain name is fully qualified: The message m is now a message with the question section set to ask the MX records for the miek.nl. zone. The following is slightly more verbose, but more flexible: After creating a message it can be sent. Basic use pattern for synchronous querying the DNS at a server configured on 127.0.0.1 and port 53: Suppressing multiple outstanding queries (with the same question, type and class) is as easy as setting: More advanced options are available using a net.Dialer and the corresponding API. For example it is possible to set a timeout, or to specify a source IP address and port to use for the connection: If these "advanced" features are not needed, a simple UDP query can be sent, with: When this functions returns you will get DNS message. A DNS message consists out of four sections. The question section: in.Question, the answer section: in.Answer, the authority section: in.Ns and the additional section: in.Extra. Each of these sections (except the Question section) contain a []RR. Basic use pattern for accessing the rdata of a TXT RR as the first RR in the Answer section: Both domain names and TXT character strings are converted to presentation form both when unpacked and when converted to strings. For TXT character strings, tabs, carriage returns and line feeds will be converted to \t, \r and \n respectively. Back slashes and quotations marks will be escaped. Bytes below 32 and above 127 will be converted to \DDD form. For domain names, in addition to the above rules brackets, periods, spaces, semicolons and the at symbol are escaped. DNSSEC (DNS Security Extension) adds a layer of security to the DNS. It uses public key cryptography to sign resource records. The public keys are stored in DNSKEY records and the signatures in RRSIG records. Requesting DNSSEC information for a zone is done by adding the DO (DNSSEC OK) bit to a request. Signature generation, signature verification and key generation are all supported. Dynamic updates reuses the DNS message format, but renames three of the sections. Question is Zone, Answer is Prerequisite, Authority is Update, only the Additional is not renamed. See RFC 2136 for the gory details. You can set a rather complex set of rules for the existence of absence of certain resource records or names in a zone to specify if resource records should be added or removed. The table from RFC 2136 supplemented with the Go DNS function shows which functions exist to specify the prerequisites. The prerequisite section can also be left empty. If you have decided on the prerequisites you can tell what RRs should be added or deleted. The next table shows the options you have and what functions to call. An TSIG or transaction signature adds a HMAC TSIG record to each message sent. The supported algorithms include: HmacSHA1, HmacSHA256 and HmacSHA512. Basic use pattern when querying with a TSIG name "axfr." (note that these key names must be fully qualified - as they are domain names) and the base64 secret "so6ZGir4GPAqINNh9U5c3A==": If an incoming message contains a TSIG record it MUST be the last record in the additional section (RFC2845 3.2). This means that you should make the call to SetTsig last, right before executing the query. If you make any changes to the RRset after calling SetTsig() the signature will be incorrect. When requesting an zone transfer (almost all TSIG usage is when requesting zone transfers), with TSIG, this is the basic use pattern. In this example we request an AXFR for miek.nl. with TSIG key named "axfr." and secret "so6ZGir4GPAqINNh9U5c3A==" and using the server 176.58.119.54: You can now read the records from the transfer as they come in. Each envelope is checked with TSIG. If something is not correct an error is returned. A custom TSIG implementation can be used. This requires additional code to perform any session establishment and signature generation/verification. The client must be configured with an implementation of the TsigProvider interface: Basic use pattern validating and replying to a message that has TSIG set. RFC 6895 sets aside a range of type codes for private use. This range is 65,280 - 65,534 (0xFF00 - 0xFFFE). When experimenting with new Resource Records these can be used, before requesting an official type code from IANA. See https://miek.nl/2014/september/21/idn-and-private-rr-in-go-dns/ for more information. EDNS0 is an extension mechanism for the DNS defined in RFC 2671 and updated by RFC 6891. It defines a new RR type, the OPT RR, which is then completely abused. Basic use pattern for creating an (empty) OPT RR: The rdata of an OPT RR consists out of a slice of EDNS0 (RFC 6891) interfaces. Currently only a few have been standardized: EDNS0_NSID (RFC 5001) and EDNS0_SUBNET (RFC 7871). Note that these options may be combined in an OPT RR. Basic use pattern for a server to check if (and which) options are set: SIG(0) From RFC 2931: It works like TSIG, except that SIG(0) uses public key cryptography, instead of the shared secret approach in TSIG. Supported algorithms: ECDSAP256SHA256, ECDSAP384SHA384, RSASHA1, RSASHA256 and RSASHA512. Signing subsequent messages in multi-message sessions is not implemented.

v1.1.63 • 2 weeks ago

cloud.google.com/go

Package cloud is the root of the packages used to access Google Cloud Services. See https://pkg.go.dev/cloud.google.com/go#section-directories for a full list of sub-modules. All clients in sub-packages are configurable via client options. These options are described here: https://pkg.go.dev/google.golang.org/api/option. Endpoint configuration is used to specify the URL to which requests are sent. It is used for services that support or require regional endpoints, as well as for other use cases such as testing against fake servers. For example, the Vertex AI service recommends that you configure the endpoint to the location with the features you want that is closest to your physical location or the location of your users. There is no global endpoint for Vertex AI. See Vertex AI - Locations for more details. The following example demonstrates configuring a Vertex AI client with a regional endpoint: All of the clients support authentication via Google Application Default Credentials, or by providing a JSON key file for a Service Account. See examples below. Google Application Default Credentials (ADC) is the recommended way to authorize and authenticate clients. For information on how to create and obtain Application Default Credentials, see https://cloud.google.com/docs/authentication/production. If you have your environment configured correctly you will not need to pass any extra information to the client libraries. Here is an example of a client using ADC to authenticate: You can use a file with credentials to authenticate and authorize, such as a JSON key file associated with a Google service account. Service Account keys can be created and downloaded from https://console.cloud.google.com/iam-admin/serviceaccounts. This example uses the Secret Manger client, but the same steps apply to the all other client libraries this package as well. Example: In some cases (for instance, you don't want to store secrets on disk), you can create credentials from in-memory JSON and use the WithCredentials option. This example uses the Secret Manager client, but the same steps apply to all other client libraries as well. Note that scopes can be found at https://developers.google.com/identity/protocols/oauth2/scopes, and are also provided in all auto-generated libraries: for example, cloud.google.com/go/secretmanager/apiv1 provides DefaultAuthScopes. Example: By default, non-streaming methods, like Create or Get, will have a default deadline applied to the context provided at call time, unless a context deadline is already set. Streaming methods have no default deadline and will run indefinitely. To set timeouts or arrange for cancellation, use context. Transient errors will be retried when correctness allows. Here is an example of setting a timeout for an RPC using context.WithTimeout: Here is an example of setting a timeout for an RPC using github.com/googleapis/gax-go/v2.WithTimeout: Here is an example of how to arrange for an RPC to be canceled, use context.WithCancel: Do not attempt to control the initial connection (dialing) of a service by setting a timeout on the context passed to NewClient. Dialing is non-blocking, so timeouts would be ineffective and would only interfere with credential refreshing, which uses the same context. Regardless of which transport is used, request headers can be set in the same way using [`callctx.SetHeaders`]setheaders. Here is a generic example: There are a some header keys that Google reserves for internal use that must not be ovewritten. The following header keys are broadly considered reserved and should not be conveyed by client library users unless instructed to do so: * `x-goog-api-client` * `x-goog-request-params` Be sure to check the individual package documentation for other service-specific reserved headers. For example, Storage supports a specific auditing header that is mentioned in that [module's documentation]storagedocs. Google Cloud services respect system parameterssystem parameters that can be used to augment request and/or response behavior. For the most part, they are not needed when using one of the enclosed client libraries. However, those that may be necessary are made available via the [`callctx`]callctx package. If not present there, consider opening an issue on that repo to request a new constant. Connection pooling differs in clients based on their transport. Cloud clients either rely on HTTP or gRPC transports to communicate with Google Cloud. Cloud clients that use HTTP rely on the underlying HTTP transport to cache connections for later re-use. These are cached to the http.MaxIdleConns and http.MaxIdleConnsPerHost settings in http.DefaultTransport by default. For gRPC clients, connection pooling is configurable. Users of Cloud Client Libraries may specify google.golang.org/api/option.WithGRPCConnectionPool as a client option to NewClient calls. This configures the underlying gRPC connections to be pooled and accessed in a round robin fashion. Minimal container images like Alpine lack CA certificates. This causes RPCs to appear to hang, because gRPC retries indefinitely. See https://github.com/googleapis/google-cloud-go/issues/928 for more information. For tips on how to write tests against code that calls into our libraries check out our Debugging Guide. For tips on how to write tests against code that calls into our libraries check out our Testing Guide. Most of the errors returned by the generated clients are wrapped in an github.com/googleapis/gax-go/v2/apierror.APIError and can be further unwrapped into a google.golang.org/grpc/status.Status or google.golang.org/api/googleapi.Error depending on the transport used to make the call (gRPC or REST). Converting your errors to these types can be a useful way to get more information about what went wrong while debugging. APIError gives access to specific details in the error. The transport-specific errors can still be unwrapped using the APIError. Semver is used to communicate stability of the sub-modules of this package. Note, some stable sub-modules do contain packages, and sometimes features, that are considered unstable. If something is unstable it will be explicitly labeled as such. Example of package does in an unstable package: Clients that contain alpha and beta in their import path may change or go away without notice. Clients marked stable will maintain compatibility with future versions for as long as we can reasonably sustain. Incompatible changes might be made in some situations, including:

v0.118.2 • 3 days ago

cloud.google.com/go/pubsub

Package pubsub provides an easy way to publish and receive Google Cloud Pub/Sub messages, hiding the details of the underlying server RPCs. Pub/Sub is a many-to-many, asynchronous messaging system that decouples senders and receivers. More information about Pub/Sub is available at https://cloud.google.com/pubsub/docs See https://godoc.org/cloud.google.com/go for authentication, timeouts, connection pooling and similar aspects of this package. Pub/Sub messages are published to topics. A Topic may be created using Client.CreateTopic like so: Messages may then be published to a Topic: Topic.Publish queues the message for publishing and returns immediately. When enough messages have accumulated, or enough time has elapsed, the batch of messages is sent to the Pub/Sub service. Topic.Publish returns a PublishResult, which behaves like a future: its Get method blocks until the message has been sent to the service. The first time you call Topic.Publish on a Topic, goroutines are started in the background. To clean up these goroutines, call Topic.Stop: To receive messages published to a Topic, clients create a Subscription for the topic. There may be more than one subscription per topic ; each message that is published to the topic will be delivered to all associated subscriptions. A Subscription may be created like so: Messages are then consumed from a Subscription via callback. The callback is invoked concurrently by multiple goroutines, maximizing throughput. To terminate a call to Subscription.Receive, cancel its context. Once client code has processed the Message, it must call Message.Ack or Message.Nack; otherwise the Message will eventually be redelivered. Ack/Nack MUST be called within the Subscription.Receive handler function, and not from a goroutine. Otherwise, flow control (e.g. ReceiveSettings.MaxOutstandingMessages) will not be respected, and messages can get orphaned when cancelling Receive. If the client cannot or doesn't want to process the message, it can call Message.Nack to speed redelivery. For more information and configuration options, see Ack Deadlines below. Note: It is possible for a Message to be redelivered even if Message.Ack has been called. Client code must be robust to multiple deliveries of messages. Note: This uses pubsub's streaming pull feature. This feature has properties that may be surprising. Please take a look at https://cloud.google.com/pubsub/docs/pull#streamingpull for more details on how streaming pull behaves compared to the synchronous pull method. The number of StreamingPull connections can be configured by setting NumGoroutines in ReceiveSettings. The default value of 10 means the client library will maintain 10 StreamingPull connections. This is more than sufficient for most use cases, as StreamingPull connections can handle up to 10 MB/s https://cloud.google.com/pubsub/quotas#resource_limits. In some cases, using too many streams can lead to client library behaving poorly as the application becomes I/O bound. By default, the number of connections in the gRPC conn pool is min(4,GOMAXPROCS). Each connection supports up to 100 streams. Thus, if you have 4 or more CPU cores, the default setting allows a maximum of 400 streams which is already excessive for most use cases. If you want to change the limits on the number of streams, you can change the number of connections in the gRPC connection pool as shown below: The default pubsub deadlines are suitable for most use cases, but may be overridden. This section describes the tradeoffs that should be considered when overriding the defaults. Behind the scenes, each message returned by the Pub/Sub server has an associated lease, known as an "ack deadline". Unless a message is acknowledged within the ack deadline, or the client requests that the ack deadline be extended, the message will become eligible for redelivery. As a convenience, the pubsub client will automatically extend deadlines until either: Ack deadlines are extended periodically by the client. The period between extensions, as well as the length of the extension, automatically adjusts based on the time it takes the subscriber application to ack messages (based on the 99th percentile of ack latency). By default, this extension period is capped at 10m, but this limit can be configured by the "MaxExtensionPeriod" setting. This has the effect that subscribers that process messages quickly have their message ack deadlines extended for a short amount, whereas subscribers that process message slowly have their message ack deadlines extended for a large amount. The net effect is fewer RPCs sent from the client library. For example, consider a subscriber that takes 3 minutes to process each message. Since the library has already recorded several 3-minute "ack latencies"s in a percentile distribution, future message extensions are sent with a value of 3 minutes, every 3 minutes. Suppose the application crashes 5 seconds after the library sends such an extension: the Pub/Sub server would wait the remaining 2m55s before re-sending the messages out to other subscribers. Please note that by default, the client library does not use the subscription's AckDeadline for the MaxExtension value. For use cases where message processing exceeds 30 minutes, we recommend using the base client in a pull model, since long-lived streams are periodically killed by firewalls. See the example at https://godoc.org/cloud.google.com/go/pubsub/apiv1#example-SubscriberClient-Pull-LengthyClientProcessing To use an emulator with this library, you can set the PUBSUB_EMULATOR_HOST environment variable to the address at which your emulator is running. This will send requests to that address instead of to Pub/Sub. You can then create and use a client as usual:

v1.47.0 • last week

github.com/jackc/pgx/v4

Package pgx is a PostgreSQL database driver. pgx provides lower level access to PostgreSQL than the standard database/sql. It remains as similar to the database/sql interface as possible while providing better speed and access to PostgreSQL specific features. Import github.com/jackc/pgx/v4/stdlib to use pgx as a database/sql compatible driver. The primary way of establishing a connection is with `pgx.Connect`. The database connection string can be in URL or DSN format. Both PostgreSQL settings and pgx settings can be specified here. In addition, a config struct can be created by `ParseConfig` and modified before establishing the connection with `ConnectConfig`. `*pgx.Conn` represents a single connection to the database and is not concurrency safe. Use sub-package pgxpool for a concurrency safe connection pool. pgx implements Query and Scan in the familiar database/sql style. pgx also implements QueryRow in the same style as database/sql. Use Exec to execute a query that does not return a result set. QueryFunc can be used to execute a callback function for every row. This is often easier to use than Query. pgx maps between all common base types directly between Go and PostgreSQL. In particular: pgx can map nulls in two ways. The first is package pgtype provides types that have a data field and a status field. They work in a similar fashion to database/sql. The second is to use a pointer to a pointer. pgx maps between int16, int32, int64, float32, float64, and string Go slices and the equivalent PostgreSQL array type. Go slices of native types do not support nulls, so if a PostgreSQL array that contains a null is read into a native Go slice an error will occur. The pgtype package includes many more array types for PostgreSQL types that do not directly map to native Go types. pgx includes built-in support to marshal and unmarshal between Go types and the PostgreSQL JSON and JSONB. pgx encodes from net.IPNet to and from inet and cidr PostgreSQL types. In addition, as a convenience pgx will encode from a net.IP; it will assume a /32 netmask for IPv4 and a /128 for IPv6. pgx includes support for the common data types like integers, floats, strings, dates, and times that have direct mappings between Go and SQL. In addition, pgx uses the github.com/jackc/pgtype library to support more types. See documention for that library for instructions on how to implement custom types. See example_custom_type_test.go for an example of a custom type for the PostgreSQL point type. pgx also includes support for custom types implementing the database/sql.Scanner and database/sql/driver.Valuer interfaces. If pgx does cannot natively encode a type and that type is a renamed type (e.g. type MyTime time.Time) pgx will attempt to encode the underlying type. While this is usually desired behavior it can produce surprising behavior if one the underlying type and the renamed type each implement database/sql interfaces and the other implements pgx interfaces. It is recommended that this situation be avoided by implementing pgx interfaces on the renamed type. Row values and composite types are represented as pgtype.Record (https://pkg.go.dev/github.com/jackc/pgtype?tab=doc#Record). It is possible to get values of your custom type by implementing DecodeBinary interface. Decoding into pgtype.Record first can simplify process by avoiding dealing with raw protocol directly. For example: []byte passed as arguments to Query, QueryRow, and Exec are passed unmodified to PostgreSQL. Transactions are started by calling Begin. The Tx returned from Begin also implements the Begin method. This can be used to implement pseudo nested transactions. These are internally implemented with savepoints. Use BeginTx to control the transaction mode. BeginFunc and BeginTxFunc are variants that begin a transaction, execute a function, and commit or rollback the transaction depending on the return value of the function. These can be simpler and less error prone to use. Prepared statements can be manually created with the Prepare method. However, this is rarely necessary because pgx includes an automatic statement cache by default. Queries run through the normal Query, QueryRow, and Exec functions are automatically prepared on first execution and the prepared statement is reused on subsequent executions. See ParseConfig for information on how to customize or disable the statement cache. Use CopyFrom to efficiently insert multiple rows at a time using the PostgreSQL copy protocol. CopyFrom accepts a CopyFromSource interface. If the data is already in a [][]interface{} use CopyFromRows to wrap it in a CopyFromSource interface. Or implement CopyFromSource to avoid buffering the entire data set in memory. When you already have a typed array using CopyFromSlice can be more convenient. CopyFrom can be faster than an insert with as few as 5 rows. pgx can listen to the PostgreSQL notification system with the `Conn.WaitForNotification` method. It blocks until a notification is received or the context is canceled. pgx defines a simple logger interface. Connections optionally accept a logger that satisfies this interface. Set LogLevel to control logging verbosity. Adapters for github.com/inconshreveable/log15, github.com/sirupsen/logrus, go.uber.org/zap, github.com/rs/zerolog, and the testing log are provided in the log directory. pgx is implemented on top of github.com/jackc/pgconn a lower level PostgreSQL driver. The Conn.PgConn() method can be used to access this lower layer. pgx is compatible with PgBouncer in two modes. One is when the connection has a statement cache in "describe" mode. The other is when the connection is using the simple protocol. This can be set with the PreferSimpleProtocol config option.

v4.18.3 • 11 months ago

github.com/jackc/pgx

Package pgx is a PostgreSQL database driver. pgx provides lower level access to PostgreSQL than the standard database/sql. It remains as similar to the database/sql interface as possible while providing better speed and access to PostgreSQL specific features. Import github.com/jackc/pgx/stdlib to use pgx as a database/sql compatible driver. pgx implements Query and Scan in the familiar database/sql style. pgx also implements QueryRow in the same style as database/sql. Use Exec to execute a query that does not return a result set. Connection pool usage is explicit and configurable. In pgx, a connection can be created and managed directly, or a connection pool with a configurable maximum connections can be used. The connection pool offers an after connect hook that allows every connection to be automatically setup before being made available in the connection pool. It delegates methods such as QueryRow to an automatically checked out and released connection so you can avoid manually acquiring and releasing connections when you do not need that level of control. pgx maps between all common base types directly between Go and PostgreSQL. In particular: pgx can map nulls in two ways. The first is package pgtype provides types that have a data field and a status field. They work in a similar fashion to database/sql. The second is to use a pointer to a pointer. pgx maps between int16, int32, int64, float32, float64, and string Go slices and the equivalent PostgreSQL array type. Go slices of native types do not support nulls, so if a PostgreSQL array that contains a null is read into a native Go slice an error will occur. The pgtype package includes many more array types for PostgreSQL types that do not directly map to native Go types. pgx includes built-in support to marshal and unmarshal between Go types and the PostgreSQL JSON and JSONB. pgx encodes from net.IPNet to and from inet and cidr PostgreSQL types. In addition, as a convenience pgx will encode from a net.IP; it will assume a /32 netmask for IPv4 and a /128 for IPv6. pgx includes support for the common data types like integers, floats, strings, dates, and times that have direct mappings between Go and SQL. In addition, pgx uses the github.com/jackc/pgx/pgtype library to support more types. See documention for that library for instructions on how to implement custom types. See example_custom_type_test.go for an example of a custom type for the PostgreSQL point type. pgx also includes support for custom types implementing the database/sql.Scanner and database/sql/driver.Valuer interfaces. If pgx does cannot natively encode a type and that type is a renamed type (e.g. type MyTime time.Time) pgx will attempt to encode the underlying type. While this is usually desired behavior it can produce suprising behavior if one the underlying type and the renamed type each implement database/sql interfaces and the other implements pgx interfaces. It is recommended that this situation be avoided by implementing pgx interfaces on the renamed type. []byte passed as arguments to Query, QueryRow, and Exec are passed unmodified to PostgreSQL. Transactions are started by calling Begin or BeginEx. The BeginEx variant can create a transaction with a specified isolation level. Use CopyFrom to efficiently insert multiple rows at a time using the PostgreSQL copy protocol. CopyFrom accepts a CopyFromSource interface. If the data is already in a [][]interface{} use CopyFromRows to wrap it in a CopyFromSource interface. Or implement CopyFromSource to avoid buffering the entire data set in memory. CopyFrom can be faster than an insert with as few as 5 rows. pgx can listen to the PostgreSQL notification system with the WaitForNotification function. It takes a maximum time to wait for a notification. The pgx ConnConfig struct has a TLSConfig field. If this field is nil, then TLS will be disabled. If it is present, then it will be used to configure the TLS connection. This allows total configuration of the TLS connection. pgx has never explicitly supported Postgres < 9.6's `ssl_renegotiation` option. As of v3.3.0, it doesn't send `ssl_renegotiation: 0` either to support Redshift (https://github.com/jackc/pgx/pull/476). If you need TLS Renegotiation, consider supplying `ConnConfig.TLSConfig` with a non-zero `Renegotiation` value and if it's not the default on your server, set `ssl_renegotiation` via `ConnConfig.RuntimeParams`. pgx defines a simple logger interface. Connections optionally accept a logger that satisfies this interface. Set LogLevel to control logging verbosity. Adapters for github.com/inconshreveable/log15, github.com/sirupsen/logrus, and the testing log are provided in the log directory.

v3.6.2+incompatible • 5 years ago

github.com/jackc/pgx/v5

Package pgx is a PostgreSQL database driver. pgx provides a native PostgreSQL driver and can act as a database/sql driver. The native PostgreSQL interface is similar to the database/sql interface while providing better speed and access to PostgreSQL specific features. Use github.com/jackc/pgx/v5/stdlib to use pgx as a database/sql compatible driver. See that package's documentation for details. The primary way of establishing a connection is with pgx.Connect: The database connection string can be in URL or key/value format. Both PostgreSQL settings and pgx settings can be specified here. In addition, a config struct can be created by ParseConfig and modified before establishing the connection with ConnectConfig to configure settings such as tracing that cannot be configured with a connection string. *pgx.Conn represents a single connection to the database and is not concurrency safe. Use package github.com/jackc/pgx/v5/pgxpool for a concurrency safe connection pool. pgx implements Query in the familiar database/sql style. However, pgx provides generic functions such as CollectRows and ForEachRow that are a simpler and safer way of processing rows than manually calling defer rows.Close(), rows.Next(), rows.Scan, and rows.Err(). CollectRows can be used collect all returned rows into a slice. ForEachRow can be used to execute a callback function for every row. This is often easier than iterating over rows directly. pgx also implements QueryRow in the same style as database/sql. Use Exec to execute a query that does not return a result set. pgx uses the pgtype package to converting Go values to and from PostgreSQL values. It supports many PostgreSQL types directly and is customizable and extendable. User defined data types such as enums, domains, and composite types may require type registration. See that package's documentation for details. Transactions are started by calling Begin. The Tx returned from Begin also implements the Begin method. This can be used to implement pseudo nested transactions. These are internally implemented with savepoints. Use BeginTx to control the transaction mode. BeginTx also can be used to ensure a new transaction is created instead of a pseudo nested transaction. BeginFunc and BeginTxFunc are functions that begin a transaction, execute a function, and commit or rollback the transaction depending on the return value of the function. These can be simpler and less error prone to use. Prepared statements can be manually created with the Prepare method. However, this is rarely necessary because pgx includes an automatic statement cache by default. Queries run through the normal Query, QueryRow, and Exec functions are automatically prepared on first execution and the prepared statement is reused on subsequent executions. See ParseConfig for information on how to customize or disable the statement cache. Use CopyFrom to efficiently insert multiple rows at a time using the PostgreSQL copy protocol. CopyFrom accepts a CopyFromSource interface. If the data is already in a [][]any use CopyFromRows to wrap it in a CopyFromSource interface. Or implement CopyFromSource to avoid buffering the entire data set in memory. When you already have a typed array using CopyFromSlice can be more convenient. CopyFrom can be faster than an insert with as few as 5 rows. pgx can listen to the PostgreSQL notification system with the `Conn.WaitForNotification` method. It blocks until a notification is received or the context is canceled. pgx supports tracing by setting ConnConfig.Tracer. To combine several tracers you can use the multitracer.Tracer. In addition, the tracelog package provides the TraceLog type which lets a traditional logger act as a Tracer. For debug tracing of the actual PostgreSQL wire protocol messages see github.com/jackc/pgx/v5/pgproto3. github.com/jackc/pgx/v5/pgconn contains a lower level PostgreSQL driver roughly at the level of libpq. pgx.Conn in implemented on top of pgconn. The Conn.PgConn() method can be used to access this lower layer. By default pgx automatically uses prepared statements. Prepared statements are incompatible with PgBouncer. This can be disabled by setting a different QueryExecMode in ConnConfig.DefaultQueryExecMode.

v5.7.2 • 2 months ago

kernel.org/pub/linux/libs/security/libcap/cap

Package cap provides all the Linux Capabilities userspace library API bindings in native Go. Capabilities are a feature of the Linux kernel that allow fine grain permissions to perform privileged operations. Privileged operations are required to do irregular system level operations from code. You can read more about how Capabilities are intended to work here: This package supports native Go bindings for all the features described in that paper as well as supporting subsequent changes to the kernel for other styles of inheritable Capability. Some simple things you can do with this package are: The "cap" package operates with POSIX semantics for security state. That is all OS threads are kept in sync at all times. The package "kernel.org/pub/linux/libs/security/libcap/psx" is used to implement POSIX semantics system calls that manipulate thread state uniformly over the whole Go (and any CGo linked) process runtime. Note, if the Go runtime syscall interface contains the Linux variant syscall.AllThreadsSyscall() API (it debuted in go1.16 see https://github.com/golang/go/issues/1435 for its history) then the "libcap/psx" package will use that to invoke Capability setting system calls in pure Go binaries. With such an enhanced Go runtime, to force this behavior, use the CGO_ENABLED=0 environment variable. POSIX semantics are more secure than trying to manage privilege at a thread level when those threads share a common memory image as they do under Linux: it is trivial to exploit a vulnerability in one thread of a process to cause execution on any another thread. So, any imbalance in security state, in such cases will readily create an opportunity for a privilege escalation vulnerability. POSIX semantics also work well with Go, which deliberately tries to insulate the user from worrying about the number of OS threads that are actually running in their program. Indeed, Go can efficiently launch and manage tens of thousands of concurrent goroutines without bogging the program or wider system down. It does this by aggressively migrating idle threads to make progress on unblocked goroutines. So, inconsistent security state across OS threads can also lead to program misbehavior. The only exception to this process-wide common security state is the cap.Launcher related functionality. This briefly locks an OS thread to a goroutine in order to launch another executable - the robust implementation of this kind of support is quite subtle, so please read its documentation carefully, if you find that you need it. See https://sites.google.com/site/fullycapable/ for recent updates, some more complete walk-through examples of ways of using 'cap.Set's etc and information on how to file bugs. Copyright (c) 2019-21 Andrew G. Morgan <morgan@kernel.org> The cap and psx packages are licensed with a (you choose) BSD 3-clause or GPL2. See LICENSE file for details.

v1.2.73 • 2 months ago

github.com/jung-kurt/gofpdf

Package gofpdf implements a PDF document generator with high level support for text, drawing and images. - UTF-8 support - Choice of measurement unit, page format and margins - Page header and footer management - Automatic page breaks, line breaks, and text justification - Inclusion of JPEG, PNG, GIF, TIFF and basic path-only SVG images - Colors, gradients and alpha channel transparency - Outline bookmarks - Internal and external links - TrueType, Type1 and encoding support - Page compression - Lines, Bézier curves, arcs, and ellipses - Rotation, scaling, skewing, translation, and mirroring - Clipping - Document protection - Layers - Templates - Barcodes - Charting facility - Import PDFs as templates gofpdf has no dependencies other than the Go standard library. All tests pass on Linux, Mac and Windows platforms. gofpdf supports UTF-8 TrueType fonts and “right-to-left” languages. Note that Chinese, Japanese, and Korean characters may not be included in many general purpose fonts. For these languages, a specialized font (for example, NotoSansSC for simplified Chinese) can be used. Also, support is provided to automatically translate UTF-8 runes to code page encodings for languages that have fewer than 256 glyphs. This repository will not be maintained, at least for some unknown duration. But it is hoped that gofpdf has a bright future in the open source world. Due to Go’s promise of compatibility, gofpdf should continue to function without modification for a longer time than would be the case with many other languages. Forks should be based on the last viable commit. Tools such as active-forks can be used to select a fork that looks promising for your needs. If a particular fork looks like it has taken the lead in attracting followers, this README will be updated to point people in that direction. The efforts of all contributors to this project have been deeply appreciated. Best wishes to all of you. To install the package on your system, run Later, to receive updates, run The following Go code generates a simple PDF file. See the functions in the fpdf_test.go file (shown as examples in this documentation) for more advanced PDF examples. If an error occurs in an Fpdf method, an internal error field is set. After this occurs, Fpdf method calls typically return without performing any operations and the error state is retained. This error management scheme facilitates PDF generation since individual method calls do not need to be examined for failure; it is generally sufficient to wait until after Output() is called. For the same reason, if an error occurs in the calling application during PDF generation, it may be desirable for the application to transfer the error to the Fpdf instance by calling the SetError() method or the SetErrorf() method. At any time during the life cycle of the Fpdf instance, the error state can be determined with a call to Ok() or Err(). The error itself can be retrieved with a call to Error(). This package is a relatively straightforward translation from the original FPDF library written in PHP (despite the caveat in the introduction to Effective Go). The API names have been retained even though the Go idiom would suggest otherwise (for example, pdf.GetX() is used rather than simply pdf.X()). The similarity of the two libraries makes the original FPDF website a good source of information. It includes a forum and FAQ. However, some internal changes have been made. Page content is built up using buffers (of type bytes.Buffer) rather than repeated string concatenation. Errors are handled as explained above rather than panicking. Output is generated through an interface of type io.Writer or io.WriteCloser. A number of the original PHP methods behave differently based on the type of the arguments that are passed to them; in these cases additional methods have been exported to provide similar functionality. Font definition files are produced in JSON rather than PHP. A side effect of running go test ./... is the production of a number of example PDFs. These can be found in the gofpdf/pdf directory after the tests complete. Please note that these examples run in the context of a test. In order run an example as a standalone application, you’ll need to examine fpdf_test.go for some helper routines, for example exampleFilename() and summary(). Example PDFs can be compared with reference copies in order to verify that they have been generated as expected. This comparison will be performed if a PDF with the same name as the example PDF is placed in the gofpdf/pdf/reference directory and if the third argument to ComparePDFFiles() in internal/example/example.go is true. (By default it is false.) The routine that summarizes an example will look for this file and, if found, will call ComparePDFFiles() to check the example PDF for equality with its reference PDF. If differences exist between the two files they will be printed to standard output and the test will fail. If the reference file is missing, the comparison is considered to succeed. In order to successfully compare two PDFs, the placement of internal resources must be consistent and the internal creation timestamps must be the same. To do this, the methods SetCatalogSort() and SetCreationDate() need to be called for both files. This is done automatically for all examples. Nothing special is required to use the standard PDF fonts (courier, helvetica, times, zapfdingbats) in your documents other than calling SetFont(). You should use AddUTF8Font() or AddUTF8FontFromBytes() to add a TrueType UTF-8 encoded font. Use RTL() and LTR() methods switch between “right-to-left” and “left-to-right” mode. In order to use a different non-UTF-8 TrueType or Type1 font, you will need to generate a font definition file and, if the font will be embedded into PDFs, a compressed version of the font file. This is done by calling the MakeFont function or using the included makefont command line utility. To create the utility, cd into the makefont subdirectory and run “go build”. This will produce a standalone executable named makefont. Select the appropriate encoding file from the font subdirectory and run the command as in the following example. In your PDF generation code, call AddFont() to load the font and, as with the standard fonts, SetFont() to begin using it. Most examples, including the package example, demonstrate this method. Good sources of free, open-source fonts include Google Fonts and DejaVu Fonts. The draw2d package is a two dimensional vector graphics library that can generate output in different forms. It uses gofpdf for its document production mode. gofpdf is a global community effort and you are invited to make it even better. If you have implemented a new feature or corrected a problem, please consider contributing your change to the project. A contribution that does not directly pertain to the core functionality of gofpdf should be placed in its own directory directly beneath the contrib directory. Here are guidelines for making submissions. Your change should - be compatible with the MIT License - be properly documented - be formatted with go fmt - include an example in fpdf_test.go if appropriate - conform to the standards of golint and go vet, that is, golint . and go vet . should not generate any warnings - not diminish test coverage Pull requests are the preferred means of accepting your changes. gofpdf is released under the MIT License. It is copyrighted by Kurt Jung and the contributors acknowledged below. This package’s code and documentation are closely derived from the FPDF library created by Olivier Plathey, and a number of font and image resources are copied directly from it. Bruno Michel has provided valuable assistance with the code. Drawing support is adapted from the FPDF geometric figures script by David Hernández Sanz. Transparency support is adapted from the FPDF transparency script by Martin Hall-May. Support for gradients and clipping is adapted from FPDF scripts by Andreas Würmser. Support for outline bookmarks is adapted from Olivier Plathey by Manuel Cornes. Layer support is adapted from Olivier Plathey. Support for transformations is adapted from the FPDF transformation script by Moritz Wagner and Andreas Würmser. PDF protection is adapted from the work of Klemen Vodopivec for the FPDF product. Lawrence Kesteloot provided code to allow an image’s extent to be determined prior to placement. Support for vertical alignment within a cell was provided by Stefan Schroeder. Ivan Daniluk generalized the font and image loading code to use the Reader interface while maintaining backward compatibility. Anthony Starks provided code for the Polygon function. Robert Lillack provided the Beziergon function and corrected some naming issues with the internal curve function. Claudio Felber provided implementations for dashed line drawing and generalized font loading. Stani Michiels provided support for multi-segment path drawing with smooth line joins, line join styles, enhanced fill modes, and has helped greatly with package presentation and tests. Templating is adapted by Marcus Downing from the FPDF_Tpl library created by Jan Slabon and Setasign. Jelmer Snoeck contributed packages that generate a variety of barcodes and help with registering images on the web. Jelmer Snoek and Guillermo Pascual augmented the basic HTML functionality with aligned text. Kent Quirk implemented backwards-compatible support for reading DPI from images that support it, and for setting DPI manually and then having it properly taken into account when calculating image size. Paulo Coutinho provided support for static embedded fonts. Dan Meyers added support for embedded JavaScript. David Fish added a generic alias-replacement function to enable, among other things, table of contents functionality. Andy Bakun identified and corrected a problem in which the internal catalogs were not sorted stably. Paul Montag added encoding and decoding functionality for templates, including images that are embedded in templates; this allows templates to be stored independently of gofpdf. Paul also added support for page boxes used in printing PDF documents. Wojciech Matusiak added supported for word spacing. Artem Korotkiy added support of UTF-8 fonts. Dave Barnes added support for imported objects and templates. Brigham Thompson added support for rounded rectangles. Joe Westcott added underline functionality and optimized image storage. Benoit KUGLER contributed support for rectangles with corners of unequal radius, modification times, and for file attachments and annotations. - Remove all legacy code page font support; use UTF-8 exclusively - Improve test coverage as reported by the coverage tool. Example demonstrates the generation of a simple PDF document. Note that since only core fonts are used (in this case Arial, a synonym for Helvetica), an empty string can be specified for the font directory in the call to New(). Note also that the example.Filename() and example.Summary() functions belong to a separate, internal package and are not part of the gofpdf library. If an error occurs at some point during the construction of the document, subsequent method calls exit immediately and the error is finally retrieved with the output call where it can be handled by the application.

v1.16.2 • 5 years ago

github.com/streadway/amqp

Package amqp is an AMQP 0.9.1 client with RabbitMQ extensions Understand the AMQP 0.9.1 messaging model by reviewing these links first. Much of the terminology in this library directly relates to AMQP concepts. Most other broker clients publish to queues, but in AMQP, clients publish Exchanges instead. AMQP is programmable, meaning that both the producers and consumers agree on the configuration of the broker, instead of requiring an operator or system configuration that declares the logical topology in the broker. The routing between producers and consumer queues is via Bindings. These bindings form the logical topology of the broker. In this library, a message sent from publisher is called a "Publishing" and a message received to a consumer is called a "Delivery". The fields of Publishings and Deliveries are close but not exact mappings to the underlying wire format to maintain stronger types. Many other libraries will combine message properties with message headers. In this library, the message well known properties are strongly typed fields on the Publishings and Deliveries, whereas the user defined headers are in the Headers field. The method naming closely matches the protocol's method name with positional parameters mapping to named protocol message fields. The motivation here is to present a comprehensive view over all possible interactions with the server. Generally, methods that map to protocol methods of the "basic" class will be elided in this interface, and "select" methods of various channel mode selectors will be elided for example Channel.Confirm and Channel.Tx. The library is intentionally designed to be synchronous, where responses for each protocol message are required to be received in an RPC manner. Some methods have a noWait parameter like Channel.QueueDeclare, and some methods are asynchronous like Channel.Publish. The error values should still be checked for these methods as they will indicate IO failures like when the underlying connection closes. Clients of this library may be interested in receiving some of the protocol messages other than Deliveries like basic.ack methods while a channel is in confirm mode. The Notify* methods with Connection and Channel receivers model the pattern of asynchronous events like closes due to exceptions, or messages that are sent out of band from an RPC call like basic.ack or basic.flow. Any asynchronous events, including Deliveries and Publishings must always have a receiver until the corresponding chans are closed. Without asynchronous receivers, the sychronous methods will block. It's important as a client to an AMQP topology to ensure the state of the broker matches your expectations. For both publish and consume use cases, make sure you declare the queues, exchanges and bindings you expect to exist prior to calling Channel.Publish or Channel.Consume. SSL/TLS - Secure connections When Dial encounters an amqps:// scheme, it will use the zero value of a tls.Config. This will only perform server certificate and host verification. Use DialTLS when you wish to provide a client certificate (recommended), include a private certificate authority's certificate in the cert chain for server validity, or run insecure by not verifying the server certificate dial your own connection. DialTLS will use the provided tls.Config when it encounters an amqps:// scheme and will dial a plain connection when it encounters an amqp:// scheme. SSL/TLS in RabbitMQ is documented here: http://www.rabbitmq.com/ssl.html This exports a Session object that wraps this library. It automatically reconnects when the connection fails, and blocks all pushes until the connection succeeds. It also confirms every outgoing message, so none are lost. It doesn't automatically ack each message, but leaves that to the parent process, since it is usage-dependent. Try running this in one terminal, and `rabbitmq-server` in another. Stop & restart RabbitMQ to see how the queue reacts.

v1.1.0 • 2 years ago

github.com/gocql/gocql

Package gocql implements a fast and robust Cassandra driver for the Go programming language. Pass a list of initial node IP addresses to NewCluster to create a new cluster configuration: Port can be specified as part of the address, the above is equivalent to: It is recommended to use the value set in the Cassandra config for broadcast_address or listen_address, an IP address not a domain name. This is because events from Cassandra will use the configured IP address, which is used to index connected hosts. If the domain name specified resolves to more than 1 IP address then the driver may connect multiple times to the same host, and will not mark the node being down or up from events. Then you can customize more options (see ClusterConfig): The driver tries to automatically detect the protocol version to use if not set, but you might want to set the protocol version explicitly, as it's not defined which version will be used in certain situations (for example during upgrade of the cluster when some of the nodes support different set of protocol versions than other nodes). The driver advertises the module name and version in the STARTUP message, so servers are able to detect the version. If you use replace directive in go.mod, the driver will send information about the replacement module instead. When ready, create a session from the configuration. Don't forget to Close the session once you are done with it: CQL protocol uses a SASL-based authentication mechanism and so consists of an exchange of server challenges and client response pairs. The details of the exchanged messages depend on the authenticator used. To use authentication, set ClusterConfig.Authenticator or ClusterConfig.AuthProvider. PasswordAuthenticator is provided to use for username/password authentication: It is possible to secure traffic between the client and server with TLS. To use TLS, set the ClusterConfig.SslOpts field. SslOptions embeds *tls.Config so you can set that directly. There are also helpers to load keys/certificates from files. Warning: Due to historical reasons, the SslOptions is insecure by default, so you need to set EnableHostVerification to true if no Config is set. Most users should set SslOptions.Config to a *tls.Config. SslOptions and Config.InsecureSkipVerify interact as follows: For example: To route queries to local DC first, use DCAwareRoundRobinPolicy. For example, if the datacenter you want to primarily connect is called dc1 (as configured in the database): The driver can route queries to nodes that hold data replicas based on partition key (preferring local DC). Note that TokenAwareHostPolicy can take options such as gocql.ShuffleReplicas and gocql.NonLocalReplicasFallback. We recommend running with a token aware host policy in production for maximum performance. The driver can only use token-aware routing for queries where all partition key columns are query parameters. For example, instead of use The DCAwareRoundRobinPolicy can be replaced with RackAwareRoundRobinPolicy, which takes two parameters, datacenter and rack. Instead of dividing hosts with two tiers (local datacenter and remote datacenters) it divides hosts into three (the local rack, the rest of the local datacenter, and everything else). RackAwareRoundRobinPolicy can be combined with TokenAwareHostPolicy in the same way as DCAwareRoundRobinPolicy. Create queries with Session.Query. Query values must not be reused between different executions and must not be modified after starting execution of the query. To execute a query without reading results, use Query.Exec: Single row can be read by calling Query.Scan: Multiple rows can be read using Iter.Scanner: See Example for complete example. The driver automatically prepares DML queries (SELECT/INSERT/UPDATE/DELETE/BATCH statements) and maintains a cache of prepared statements. CQL protocol does not support preparing other query types. When using CQL protocol >= 4, it is possible to use gocql.UnsetValue as the bound value of a column. This will cause the database to ignore writing the column. The main advantage is the ability to keep the same prepared statement even when you don't want to update some fields, where before you needed to make another prepared statement. Session is safe to use from multiple goroutines, so to execute multiple concurrent queries, just execute them from several worker goroutines. Gocql provides synchronously-looking API (as recommended for Go APIs) and the queries are executed asynchronously at the protocol level. Null values are are unmarshalled as zero value of the type. If you need to distinguish for example between text column being null and empty string, you can unmarshal into *string variable instead of string. See Example_nulls for full example. The driver reuses backing memory of slices when unmarshalling. This is an optimization so that a buffer does not need to be allocated for every processed row. However, you need to be careful when storing the slices to other memory structures. When you want to save the data for later use, pass a new slice every time. A common pattern is to declare the slice variable within the scanner loop: The driver supports paging of results with automatic prefetch, see ClusterConfig.PageSize, Session.SetPrefetch, Query.PageSize, and Query.Prefetch. It is also possible to control the paging manually with Query.PageState (this disables automatic prefetch). Manual paging is useful if you want to store the page state externally, for example in a URL to allow users browse pages in a result. You might want to sign/encrypt the paging state when exposing it externally since it contains data from primary keys. Paging state is specific to the CQL protocol version and the exact query used. It is meant as opaque state that should not be modified. If you send paging state from different query or protocol version, then the behaviour is not defined (you might get unexpected results or an error from the server). For example, do not send paging state returned by node using protocol version 3 to a node using protocol version 4. Also, when using protocol version 4, paging state between Cassandra 2.2 and 3.0 is incompatible (https://issues.apache.org/jira/browse/CASSANDRA-10880). The driver does not check whether the paging state is from the same protocol version/statement. You might want to validate yourself as this could be a problem if you store paging state externally. For example, if you store paging state in a URL, the URLs might become broken when you upgrade your cluster. Call Query.PageState(nil) to fetch just the first page of the query results. Pass the page state returned by Iter.PageState to Query.PageState of a subsequent query to get the next page. If the length of slice returned by Iter.PageState is zero, there are no more pages available (or an error occurred). Using too low values of PageSize will negatively affect performance, a value below 100 is probably too low. While Cassandra returns exactly PageSize items (except for last page) in a page currently, the protocol authors explicitly reserved the right to return smaller or larger amount of items in a page for performance reasons, so don't rely on the page having the exact count of items. See Example_paging for an example of manual paging. There are certain situations when you don't know the list of columns in advance, mainly when the query is supplied by the user. Iter.Columns, Iter.RowData, Iter.MapScan and Iter.SliceMap can be used to handle this case. See Example_dynamicColumns. The CQL protocol supports sending batches of DML statements (INSERT/UPDATE/DELETE) and so does gocql. Use Session.NewBatch to create a new batch and then fill-in details of individual queries. Then execute the batch with Session.ExecuteBatch. Logged batches ensure atomicity, either all or none of the operations in the batch will succeed, but they have overhead to ensure this property. Unlogged batches don't have the overhead of logged batches, but don't guarantee atomicity. Updates of counters are handled specially by Cassandra so batches of counter updates have to use CounterBatch type. A counter batch can only contain statements to update counters. For unlogged batches it is recommended to send only single-partition batches (i.e. all statements in the batch should involve only a single partition). Multi-partition batch needs to be split by the coordinator node and re-sent to correct nodes. With single-partition batches you can send the batch directly to the node for the partition without incurring the additional network hop. It is also possible to pass entire BEGIN BATCH .. APPLY BATCH statement to Query.Exec. There are differences how those are executed. BEGIN BATCH statement passed to Query.Exec is prepared as a whole in a single statement. Session.ExecuteBatch prepares individual statements in the batch. If you have variable-length batches using the same statement, using Session.ExecuteBatch is more efficient. See Example_batch for an example. Query.ScanCAS or Query.MapScanCAS can be used to execute a single-statement lightweight transaction (an INSERT/UPDATE .. IF statement) and reading its result. See example for Query.MapScanCAS. Multiple-statement lightweight transactions can be executed as a logged batch that contains at least one conditional statement. All the conditions must return true for the batch to be applied. You can use Session.ExecuteBatchCAS and Session.MapExecuteBatchCAS when executing the batch to learn about the result of the LWT. See example for Session.MapExecuteBatchCAS. Queries can be marked as idempotent. Marking the query as idempotent tells the driver that the query can be executed multiple times without affecting its result. Non-idempotent queries are not eligible for retrying nor speculative execution. Idempotent queries are retried in case of errors based on the configured RetryPolicy. Queries can be retried even before they fail by setting a SpeculativeExecutionPolicy. The policy can cause the driver to retry on a different node if the query is taking longer than a specified delay even before the driver receives an error or timeout from the server. When a query is speculatively executed, the original execution is still executing. The two parallel executions of the query race to return a result, the first received result will be returned. UDTs can be mapped (un)marshaled from/to map[string]interface{} a Go struct (or a type implementing UDTUnmarshaler, UDTMarshaler, Unmarshaler or Marshaler interfaces). For structs, cql tag can be used to specify the CQL field name to be mapped to a struct field: See Example_userDefinedTypesMap, Example_userDefinedTypesStruct, ExampleUDTMarshaler, ExampleUDTUnmarshaler. It is possible to provide observer implementations that could be used to gather metrics: CQL protocol also supports tracing of queries. When enabled, the database will write information about internal events that happened during execution of the query. You can use Query.Trace to request tracing and receive the session ID that the database used to store the trace information in system_traces.sessions and system_traces.events tables. NewTraceWriter returns an implementation of Tracer that writes the events to a writer. Gathering trace information might be essential for debugging and optimizing queries, but writing traces has overhead, so this feature should not be used on production systems with very high load unless you know what you are doing. Example_batch demonstrates how to execute a batch of statements. Example_dynamicColumns demonstrates how to handle dynamic column list. Example_marshalerUnmarshaler demonstrates how to implement a Marshaler and Unmarshaler. Example_nulls demonstrates how to distinguish between null and zero value when needed. Null values are unmarshalled as zero value of the type. If you need to distinguish for example between text column being null and empty string, you can unmarshal into *string field. Example_paging demonstrates how to manually fetch pages and use page state. See also package documentation about paging. Example_set demonstrates how to use sets. Example_userDefinedTypesMap demonstrates how to work with user-defined types as maps. See also Example_userDefinedTypesStruct and examples for UDTMarshaler and UDTUnmarshaler if you want to map to structs. Example_userDefinedTypesStruct demonstrates how to work with user-defined types as structs. See also examples for UDTMarshaler and UDTUnmarshaler if you need more control/better performance.

v1.7.0 • 5 months ago

github.com/codemodify/systemkit-platform-machineid

github.com/wojnosystems/go_snitch

go.buf.build/dkeung/test-5/grpc-ecosystem/grpc-gateway

go.buf.build/odpf/gwv/grpc-ecosystem/grpc-gateway

git.cryptic.systems/volker.raschek/dockerutils

golang.org/x/term

go.buf.build/protocolbuffers/go/grpc-ecosystem/grpc-gateway

github.com/gorilla/websocket

google.golang.org/grpc

github.com/talos-systems/metal-controller-manager

github.com/secure-systems-lab/go-securesystemslib

github.com/rpcx-ecosystem/quic-conn

github.com/rpcx-ecosystem/rpcx-gateway

github.com/stretchr/testify

github.com/cloudspannerecosystem/wrench

golang.org/x/build

github.com/boltdb/bolt

github.com/go-playground/validator/v10

github.com/robfig/cron/v3

github.com/fsnotify/fsnotify

github.com/miekg/dns

github.com/kyma-incubator/compass/components/system-broker

github.com/census-ecosystem/opencensus-go-exporter-aws

github.com/btcsuite/btcd

gopkg.in/fsnotify.v1

cloud.google.com/go

github.com/edgar-systems/tech-news-provider

github.com/grpc-ecosystem/grpc-gateway/v2/utilities

gopkg.in/fsnotify/fsnotify.v1

github.com/AviatrixSystems/terraform-provider-aviatrix/v2

github.com/antlr/antlr4/runtime/Go/antlr/v4

cloud.google.com/go/pubsub

github.com/jackc/pgx/v4

go.etcd.io/bbolt

github.com/panjf2000/ants/v2

github.com/CyCoreSystems/ari

kernel.org/pub/linux/libs/security/libcap/psx

github.com/jackc/pgx

github.com/jackc/pgx/v5

github.com/openshift/origin

github.com/nats-io/nats.go

github.com/smartystreets/goconvey

kernel.org/pub/linux/libs/security/libcap/cap

github.com/jung-kurt/gofpdf

k8c.io/operating-system-manager

github.com/streadway/amqp

filippo.io/age

github.com/kardianos/service

github.com/dgraph-io/ristretto

github.com/gocql/gocql