Say you want to perform two or more asynchronous tasks one after the other (like animation delays, XHR calls, file I/O, etc). You need to set up an ordered series of tasks and make sure the previous one finishes before the next one is processed. You need a sequence.

You create a sequence by calling ASQ(...). Each time you call ASQ(), you create a new, separate sequence.

To create a new step, simply call then(...) with a function. That function will be executed when that step is ready to be processed, and it will be passed as its first parameter the completion trigger. Subsequent parameters, if any, will be any messages passsed on from the immediately previous step.

The completion trigger that your step function(s) receive can be called directly to indicate success, or you can add the fail flag (see examples below) to indicate failure of that step. In either case, you can pass one or more messages onto the next step (or the next failure handler) by simply adding them as parameters to the call.

If you register a step using then(...) on a sequence which is already currently complete, that step will be processed at the next opportunity. Otherwise, calls to then(...) will be queued up until that step is ready for processing.

You can register multiple steps, and multiple failure handlers. However, messages from a previous step (success or failure completion) will only be passed to the immediately next registered step (or the next failure handler). If you want to propagate along a message through multiple steps, you must do so yourself by making sure you re-pass the received message at each step completion.

To listen for any step failing, call or(...) on your sequence to register a failure callback. You can call or() as many times as you would like. If you call or() on a sequence that has already been flagged as failed, the callback you specify will just be executed at the next opportunity.

Gates

If you have two or more tasks to perform at the same time, but want to wait for them all to complete before moving on, you need a gate.

Calling gate(..) with two or more functions creates a step that is a parallel gate across those functions, such that the single step in question isn't complete until all segments of the parallel gate are successfully complete.

For parallel gate steps, each segment of that gate will receive a copy of the message(s) passed from the previous step. Also, all messages from the segments of this gate will be passed along to the next step (or the next failure handler, in the case of a gate segment indicating a failure).

Conveniences

There are a few convenience methods on the API, as well:

pipe(..) takes one or more completion triggers from other sequences, treating each one as a separate step in the sequence in question. These completion triggers will, in turn, be piped both the success and failure streams from the sequence.

Sq.pipe(done) is sugar short-hand for Sq.then(done).or(done.fail).
seq(..) takes one or more functions, treating each one as a separate step in the sequence in question. These functions are expected to return new sequences, from which, in turn, both the success and failure streams will be piped back to the sequence in question.

seq(Fn) is sugar short-hand for then(function(done){ Fn.apply(null,[].slice.call(arguments,1)).pipe(done); }).

This method will also accept asynquence sequence instances directly. seq(Sq) is sugar short-hand for then(function(done){ Sq.pipe(done); }).

Additionally, this method can accept, either directly or through function-call, an Iterable Sequence. seq(iSq) is (sort-of) sugar short-hand for then(function(done){ iSq.then(done).or(done.fail); }).
val(..) takes one or more functions, treating each one as a separate step in the sequence in question. These functions can each optionally return a value, each value of which will, in turn, be passed as the completion value for that sequence step.

val(Fn) is sugar short-hand for then(function(done){ done(Fn.apply(null,[].slice.call(arguments,1))); }).

This method will also accept non-function values as sequence value-messages. val(Va) is sugar short-hand for then(function(done){ done(Va); }).
promise(..) takes one or more standard Promises/A+ compliant promises, and subsumes them into the sequence. See Promises/A+ Compliance below for more information.

promise(Pr) is sugar short-hand for then(function(done){ Pr.then(done,done.fail); }).

This method will also accept function(s) which return promises. promise(Fn) is sugar short-hand for then(function(done){ Fn.apply(null,[].slice.call(arguments,1)).then(done,done.fail); }).
errfcb is a flag on the triggers that are passed into then(..) steps and gate(..) segments. If you're using methods which expect an "error-first" style (aka, "node-style") callback, {trigger}.errfcb provides a properly formatted callback for the occasion.

If the "error-first" callback is then invoked with the first ("error") parameter set, the main sequence is flagged for error as usual. Otherwise, the main sequence proceeds as success. Messages sent to the callback are passed through to the main sequence as success/error as expected.

ASQ(function(done){ somethingAsync(done.errfcb); }) is sugar short-hand for ASQ(function(done){ somethingAsync(function(err){ if (err) done.fail(err); else done.apply(null,[].slice.call(arguments,1))}); }).

You can also abort() a sequence at any time, which will prevent any further actions from occurring on that sequence (all callbacks will be ignored). The call to abort() can happen on the sequence API itself, or using the abort flag on a completion trigger in any step (see example below).

ASQ.messages(..) wraps a set of values as a ASQ-branded array, making it easier to pass multiple messages at once, and also to make it easier to distinguish a normal array (a value) from a value-messages container array, using ASQ.isMessageWrapper(..).

If you want to test if any arbitrary object is an asynquence sequence instance, use ASQ.isSequence(..).

ASQ.iterable(..) is added by the iterable-sequence contrib plugin. See Iterable Sequences below for more information.

ASQ.noConflict() rolls back the global ASQ identifier and returns the current API instance to you. This can be used to keep your global namespace clean, or it can be used to have multiple simultaneous libraries (including separate versions/copies of asynquence!) in the same program without conflicts over the ASQ global identifier.

Plugin Extensions

ASQ.extend( {name}, {build} ) allows you to specify an API extension, giving it a name and a build function callback that should return the implementation of your API extension. The build callback is provided two parameters, the sequence api instance, and an internals(..) method, which lets you get or set values of various internal properties (generally, don't use this if you can avoid it).

Example:

// "foobar" plugin, which injects message "foobar!"
// into the sequence stream
ASQ.extend("foobar",function __build__(api,internals){
    return function __foobar__() {
        api.val(function __val__(){
            return "foobar!";
        });

        return api;
    };
});

ASQ()
.foobar() // our custom plugin!
.val(function(msg){
    console.log(msg); // foobar!
});

See the /contrib/* plugins for more complex examples of how to extend the asynquence API.

The /contrib/* plugins provide a variety of optional contrib plugins as helpers for async flow-controls.

For browser usage, simply include the asq.js library file and then the contrib.js file. For node.js, these contrib plugins are available as a separate npm module asynquence-contrib.

Iterable Sequences

One of the contrib plugins provided is iterable-sequence. Unlike other plugins, which add methods onto the sequence instance API, this plugin adds a new method directly onto the main module API: ASQ.iterable(..). Calling ASQ.iterable(..) creates a special iterable sequence, as compared to calling ASQ(..) to create a normal asynquence sequence.

An iterable sequence works similarly to normal asynquence sequences, but a bit different. then(..) still registers steps on the sequence, but it's basically just an alias of val(..), because the most important difference is that steps of an iterable sequence are not passed completion triggers.

Instead, an iterable sequence instance API has a next(..) method on it, which will allow the sequence to be externally iterated, one step at a time. Whatever is passed to next(..) is sent as step messages to the current step in the sequence. next(..) always returns an object like:

{
    value: ...          // return messages
    done: true|false    // sequence iteration complete?
}

value is any return message(s) from the next(..) invocation (undefined otherwise). done is true if the previously iterated step was (so far) the last registered step in the iterable sequence, or false if there's still more sequence steps queued up.

Just like with normal asynquence sequences, register one or more error listeners on the iterable sequence by calling or(..). If a step results in some error (either accidentally or manually via throw ..), the iterable sequence is flagged in the error state, and any error messages are passed to the registered or(..) listeners.

Also, just like next(..) externally controls the normal iteration flow of the sequence, throw(..) externally "throws" an error into the iterable sequence, triggering the or(..) flow as above. Iterable sequences can be abort()d just as normal asynquence sequences.

Iterable sequences are a special subset of sequences, and as such, some of the normal asynquence API variations do not exist, such as gate(..), seq(..), and promise(..).

function step(num) {
    return "Step " + num;
}

var sq = ASQ.iterable()
    .then(step)
    .then(step)
    .then(step);

for (var i=0, ret;
    !(ret && ret.done) && (ret = sq.next(i+1));
    i++
) {
    console.log(ret.value);
}
// Step 1
// Step 2
// Step 3

This example shows sync iteration with a for loop, but of course, next(..) can be called in various async fashions to iterate the sequence over time.

Multiple parameters

API methods take one or more functions as their parameters. gate(..) treats multiple functions as segments in the same gate. The other API methods (then(..), or(..), pipe(..), seq(..), and val(..)) treat multiple parameters as just separate subsequent steps in the respective sequence. These methods don't accept arrays of functions (that you might build up programatically), but since they take multiple parameters, you can use .apply(..) to spread those out.

Promises/A+ Compliance

The goal of asynquence is that you should be able to use it as your primary async flow-control library, without the need for other Promises implementations.

This lib is intentionally designed to hide/abstract the idea of Promises, such that you can do quick and easy async flow-control programming without creating Promises directly.

As such, the asynquence API itself is not Promises/A+ compliant, nor should it be, because the "promises" used are hidden underneath asynquence's API. Note: the implementation promises behave predictably like standard Promises.

If you are also using other Promises implementations alongside asynquence, you can quite easily receive and consume a regular Promise value from some other method into the signal/control flow for an asynquence sequence.

For example, if using both the Q promises library and asynquence:

// Using *Q*, make a standard Promise out
// of jQuery's Ajax "promise"
var p = Q( $.ajax(..) );

// Now, asynquence flow-control including a
// standard Promise
ASQ()
.then(function(done){
    setTimeout(done,100);
})
// subsume a standard Promise into the sequence
.promise(p)
.val(function(ajaxResp){
    console.log(ajaxResp);
});

Despite API similarities (like the presence of then(..) on the API), an asynquence instance is not designed to be used as a Promise value linked/passed to another standard Promise.

Trying to do so will likely cause unexpected behavior, because Promises/A+ insists on problematic (read: "dangerous") duck-typing for objects that have a then() method, as asynquence instances do.

Browser, node.js (CommonJS), AMD: ready!

The asynquence library is packaged with a light variation of the UMD (universal module definition) pattern, which means the same file is suitable for inclusion either as a normal browser .js file, as a node.js module, or as an AMD module. Can't get any simpler than that, can it?

For browser usage, simply include the asq.js library file. For node.js usage, install the asynquence package via npm, then require(..) the module:

var ASQ = require("asynquence");

Note: The ASQ.noConflict() method really only makes sense when used in a normal browser global namespace environment. It should not be used when the node.js or AMD style modules are your method of inclusion.

Usage Examples

Using the following example setup:

function fn1(done) {
    alert("Step 1");
    setTimeout(done,1000);
}

function fn2(done) {
    alert("Step 2");
    setTimeout(done,1000);
}

function yay() {
    alert("Done!");
}

Execute fn1, then fn2, then finally yay:

ASQ(fn1)
.then(fn2)
.then(yay);

Pass messages from step to step:

ASQ(function(done){
    setTimeout(function(){
        done("hello");
    },1000);
})
.then(function(done,msg1){
    setTimeout(function(){
        done(msg1,"world");
    },1000);
})
.then(function(_,msg1,msg2){ // basically ignoring this step's completion trigger (`_`)
    alert("Greeting: " + msg1 + " " + msg2);
    // 'Greeting: hello world'
});

Handle step failure:

ASQ(function(done){
    setTimeout(function(){
        done("hello");
    },1000);
})
.then(function(done,msg1){
    setTimeout(function(){
        // note the `fail` flag here!!
        done.fail(msg1,"world");
    },1000);
})
.then(function(){
    // sequence fails, won't ever get called
})
.or(function(msg1,msg2){
    alert("Failure: " + msg1 + " " + msg2);
    // 'Failure: hello world'
});

Create a step that's a parallel gate:

ASQ()
// normal async step
.then(function(done){
    setTimeout(function(){
        done("hello");
    },1000);
})
// parallel gate step (segments run in parallel)
.gate(
    function(done,greeting){ // gate segment
        setTimeout(function(){
            // 2 gate messages!
            done(greeting,"world");
        },500);
    },
    function(done,greeting){ // gate segment
        setTimeout(function(){
            // only 1 gate message!
            done(greeting + " mikey");
        },100);
        // this segment finishes first, but message
        // still kept "in order"
    }
)
.then(function(_,msg1,msg2){
    // msg1 is an array of the 2 gate messages
    // from the first segment
    // msg2 is the single message (not an array)
    // from the second segment

    alert("Greeting: " + msg1[0] + " " + msg1[1]);
    // 'Greeting: hello world'
    alert("Greeting: " + msg2);
    // 'Greeting: hello mikey'
});

Use pipe(..), seq(..), and val(..) helpers:

var seq = ASQ()
.then(function(done){
    ASQ()
    .then(function(done){
        setTimeout(function(){
            done("Hello World");
        },100);
    })
    .pipe(done); // pipe sequence output to `done` completion trigger
})
.val(function(msg){ // NOTE: no completion trigger passed in!
    return msg.toUpperCase(); // map return value as step output
})
.seq(function(msg){ // NOTE: no completion trigger passed in!
    var seq = ASQ();

    seq
    .then(function(done){
        setTimeout(function(){
            done(msg.split(" ")[0]);
        },100);
    });

    return seq; // pipe this sub-sequence back into the main sequence
})
.then(function(_,msg){
    alert(msg); // "HELLO"
});

Abort a sequence in progress:

var seq = ASQ()
.then(fn1)
.then(fn2)
.then(yay);

setTimeout(function(){
    // will stop the sequence before running
    // steps `fn2` and `yay`
    seq.abort();
},100);

// same as above
ASQ()
.then(fn1)
.then(function(done){
    setTimeout(function(){
        // `abort` flag will stop the sequence
        // before running steps `fn2` and `yay`
        done.abort();
    },100);
})
.then(fn2)
.then(yay);

Builds

The core library file can be built (minified) with an included utility:

./build-core.js

However, the recommended way to invoke this utility is via npm:

npm run-script build-core

License

The code and all the documentation are released under the MIT license.

http://getify.mit-license.org/

Keywords

FAQs

What is asynquence?

Is asynquence popular?

Is asynquence well maintained?

Package last updated on 19 Jan 2014

Did you know?

Socket for GitHub automatically highlights issues in each pull request and monitors the health of all your open source dependencies. Discover the contents of your packages and block harmful activity before you install or update your dependencies.

Install

asynquence

asynquence

Explanation

TL;DR: By Example

Sequences