cht-couch2pg

CHT couch2pg

Create read-only replicas of CouchDB data inside PostgresSQL.

The focus is specifically on CHT application data currently stored in CouchDB. If you are looking to have a read-only replica of CouchDB data for your application that isn't the CHT, consider couch2pg.

This version is built for medic/cht-core#3.0.0 and above. For replicating data from earlier versions, see the 2.0.x branch and associated tags.

Prerequisites

Clone

All steps below require you to have a local clone of the repo.

git clone https://github.com/medic/cht-couch2pg.git

Node and npm

You will need to install the following to run locally, but not for docker:

• Node.js 8.11.x up to 12.x.x. Must be an LTS release. LTS is designated with an even major version number.
• npm 6.x.x above

NOTE: Currently, cht-couch2pg only runs in node versions 8, 10 and 12. Later versions of node have been known to fail.

Database setup

cht-couch2pg supports PostgreSQL 9.4 and greater. The user passed in POSTGRESQL_URL needs to have full creation rights on the database in POSTGRES_DB_NAME.

Running

Locally with environment variables

1. cd into it this repo's directory where you cloned it.
2. Install dependencies:

   npm ci
   

3. Export these four variables with the values you need.:

   export POSTGRESQL_URL=postgres://postgres:postgres@localhost:15432/postgres
   export COUCHDB_URL=https://admin:pass@localhost:5984/medic
   export COUCH2PG_DOC_LIMIT=1000
   export COUCH2PG_RETRY_COUNT=5
   

4. Run: node .

If you want to set and save all possible variables:

1. cd into it this repo's directory where you cloned it.
2. Copy sample.env to couch2pg.env
3. Edit couch2pg.env to have all the variables you need. Note that POSTGRESQL_URL shouldn't be edited as it's defined by the variables above it. Be sure to change POSTGRES_SERVER_NAME to where ever your postgress server is running. If it's local, then use localost. The default value of postgres won't work.
4. Run: . ./couch2pg.env&&node .

In docker-compose

The simplest way to run with docker-compose is to specify the CouchDB instance that your CHT is using. The compose file will then create a dockerized PostgresSQL instance, connect to the CouchDB server and proceed to download all the data to the PostgresSQL instance:

1. cd into it this repo's directory where you cloned it.
2. When starting the docker compose services, you need to set the URL for CouchDB in the COUCHDB_URL env variable. This URL needs to be reachable the docker container (ie not localhost). Ensuring you're in the same directory where you ran the curl call in the prior step, run:

   export COUCHDB_URL=https://medic:[e-mail]:8442/medic 
   docker-compose up
   

3. Connect to the PostgresSQL instance with login cht_couch2pg, password cht_couch2pg_password and database cht. As these are insecure, do not use with production data. See below for how to harden these.

If you want to set all possible variables, or be able to store the variables in configuration file:

1. cd into it this repo's directory where you cloned it.
2. Copy sample.env to couch2pg.env
3. Edit couch2pg.env to have all the variables you need. Note that POSTGRESQL_URL shouldn't be edited as it's defined by the variables above it. If you're using the built-in PostgresSQL server, be sure to keep the POSTGRES_SERVER_NAME set to postgres as this is the correct internal service name in docker. Be sure to also set secure passwords for all PostgresSQL accounts.
4. Run docker and specify the environment file you just edited:

   docker-compose --env-file couch2pg.env up
   

5. To connect to the PostgresSQL instance, use the server from POSTGRES_SERVER_NAME, use login from COUCH2PG_USER, password from COUCH2PG_USER_PASSWORD and the database from POSTGRES_DB_NAME.

Interactive

Run it locally in interactive mode with node . -i and you will see the ASCII art:

   ____   _   _   _____            ____                          _       ____    ____          
  / ___| | | | | |_   _|          / ___|   ___    _   _    ___  | |__   |___ \  |  _ \    __ _ 
 | |     | |_| |   | |    _____  | |      / _ \  | | | |  / __| | '_ \    __) | | |_) |  / _` |
 | |___  |  _  |   | |   |_____| | |___  | (_) | | |_| | | (__  | | | |  / __/  |  __/  | (_| |
  \____| |_| |_|   |_|            \____|  \___/   \__,_|  \___| |_| |_| |_____| |_|      \__, |
                                                                                         |___/ 

Instead of environment variables, you will be prompted to answer the following questions. For each question, you will be given suggestions for an answer:

• Enter CHT's couch url
• Enter cht-couch2pg postgres url
• Select the number of minutes interval between checking for updates
• Select the number of documents to grab concurrently. Increasing this number will cut down on HTTP GETs and may improve performance, decreasing this number will cut down on node memory usage, and may increase stability.
• Select the number of document ids to grab per change limit request. Increasing this number will cut down on HTTP GETs and may improve performance, decreasing this number will cut down on node memory usage slightly, and may increase stability.
• Select whether or not to have verbose logging.
• Select how many times to internally retry continued unsuccessful runs before exiting. If unset cht-couch2pg will retry indefinitely. If set it will retry N times, and then exit with status code 1 indefinitely
• Select the number of documents to grab concurrently from the users-meta database. Increasing this number will cut down on HTTP GETs and may improve performance, decreasing this number will cut down on node memory usage, and may increase stability. These documents are larger so set a limit lower than the docLimit

Supported environment variables

All three methods of running cht-couch2pg listed above use these variables:

• COUCHDB_URL - CouchDB instance URL with no trailing slash after /medic, format: https://[user]:[password]@localhost:[port]/medic
• COUCH2PG_SLEEP_MINS - Number of minutes between synchronization. It defaults to 60.
• COUCH2PG_DOC_LIMIT - Number of documents cht-couch2pg fetches from CouchDB everytime. Suggested: 1000
• COUCH2PG_RETRY_COUNT - Number of times cht-couch2pg will retry synchronizing documents from CouchDB after experiencing an error
• COUCH2PG_USERS_META_DOC_LIMIT - Number of documents to grab concurrently from the users-meta database. These documents are larger so set a limit lower than the docLimit. It defaults to 50.
• COUCH2PG_CHANGES_LIMIT - The number of document ids to fetch per change limit request. Suggested: 100
• COUCH2PG_USER - The user that couch2pg will use to login in to the CouchDB server. Suggested cht_couch2pg
• COUCH2PG_USER_PASSWORD - The password that couch2pg will use to login in to the CouchDB server.
• POSTGRES_SERVER_NAME - The server or IP where the postgres server is. This should be set to postgres when using docker.
• POSTGRES_USER_NAME - The admin user for postgres in docker. Suggested: postgres_root
• POSTGRES_PASSWORD - The admin password for postgres in docker.
• POSTGRES_DB_NAME - The name of the PostgreSQL database to sync to.. Suggested: cht
• POSTGRES_PORT - Port where PostgresSQL can be found. Suggested: 5432
• POSTGRESQL_URL - PostgresSQL instance URL, format: postgres://[user]:[password]@localhost:[port]/[database name]
• SYNC_DB_MEDIC - Whether to sync the content of the medic database. Suggested: true
• SYNC_DB_SENTINEL - Whether to sync the content of the medic-sentinel database. Suggested: true
• SYNC_DB_USER_META - Whether to sync the content of the medic-users-meta database. Suggested: true
• SYNC_DB_LOGS - Whether to sync the content of medic-logs database. Suggested: true

Known issues

Error "Checksum failed for migration ..." when upgrading from 3.2.0 to latest

An SQL migration file was changed in version 3.2.0. This made upgrades from 3.1.x impossible, with the process crashing upon startup after the upgrade. See more details about the error.

This was fixed in version 3.2.1, by reverting the changes made to the migration file. Fresh installations of 3.2.0 should execute this SQL before upgrading:

UPDATE xmlforms_migrations
  SET md5 = 'e0535c9fe3faef6e66a31691deebf1a8'
  WHERE version = '201606200952' AND
        md5 = '40187aa5ee95eda0e154ecefd7512cda';

See more details about the error in #78.

Error installing deps ERR! ... node-pre-gyp install --fallback-to-build

When installing Node.js dependencies locally or building the docker image, you might get an error like:

...
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! node-libcurl@1.3.3 install: `node-pre-gyp install --fallback-to-build`

It is probably related to a gcc library that is failing with some versions of Node and npm, try with Node 10 without updating the npm version that comes with it.

Tests

Run tests with docker-compose:

docker-compose  -f docker-compose.test.yml build cht-couch2pg
docker-compose  -f docker-compose.test.yml run cht-couch2pg grunt test

Run tests in interactive watch mode with: docker-compose -f docker-compose.test.yml run cht-couch2pg npm run watch

Run entrypoint script tests with

docker-compose -f docker-compose.test.yml run cht-couch2pg ./tests/bash/bats/bin/bats  /app/tests/bash/test.bats