Performance testing companion for React and React Native.
You want your React Native app to perform well and fast at all times. As a part of this goal, you profile the app, observe render patterns, apply memoization in the right places, etc. But it's all manual and too easy to unintentionally introduce performance regressions that would only get caught during QA or worse, by your users.
Reassure allows you to automate React Native app performance regression testing on CI or a local machine. In the same way, you write your integration and unit tests that automatically verify that your app is still working correctly, you can write performance tests that verify that your app is still working performantly.
You can think about it as a React performance testing library. In fact, Reassure is designed to reuse as much of your React Native Testing Library tests and setup as possible.
Reassure works by measuring render characteristics – duration and count – of the testing scenario you provide and comparing that to the stable version. It repeats the scenario multiple times to reduce the impact of random variations in render times caused by the runtime environment. Then, it applies statistical analysis to determine whether the code changes are statistically significant. As a result, it generates a human-readable report summarizing the results and displays it on the CI or as a comment to your pull request.
In addition to measuring component render times it can also measure execution of regular JavaScript functions.
To install Reassure, run the following command in your app folder:
Using yarn
yarn add --dev reassure
Using npm
npm install --save-dev reassure
You will also need a working Jest setup as well as one of either React Native Testing Library or React Testing Library.
See Installation guide.
You can check our example projects:
Reassure will try to detect which Testing Library you have installed. If both React Native Testing Library and React Testing Library are present, it will warn you about that and give precedence to React Native Testing Library. You can explicitly specify Testing Library to be used by using configure option:
configure({ testingLibrary: 'react-native' });
// or
configure({ testingLibrary: 'react' });
You should set it in your Jest setup file, and you can override it in particular test files if needed.
Now that the library is installed, you can write your first test scenario in a file with .perf-test.js/.perf-test.tsx extension:
// ComponentUnderTest.perf-test.tsx
import { measureRenders } from 'reassure';
import { ComponentUnderTest } from './ComponentUnderTest';
test('Simple test', async () => {
await measureRenders(<ComponentUnderTest />);
});
This test will measure render times of ComponentUnderTest during mounting and resulting sync effects.
Note: Reassure will automatically match test filenames using Jest's
--testMatchoption with value"**/__perf__/**/*.[jt]s?(x)", "**/*.(perf|perf-test).[jt]s?(x)". However, if you want to pass a custom--testMatchor--testRegexoption, you may add it to thereassure measurescript to pass your own glob. More about--testMatchand--testRegexin Jest docs
If your component contains any async logic or you want to test some interaction, you should pass the scenario option:
import { measureRenders } from 'reassure';
import { screen, fireEvent } from '@testing-library/react-native';
import { ComponentUnderTest } from './ComponentUnderTest';
test('Test with scenario', async () => {
const scenario = async () => {
fireEvent.press(screen.getByText('Go'));
await screen.findByText('Done');
};
await measureRenders(<ComponentUnderTest />, { scenario });
});
The body of the scenario function is using familiar React Native Testing Library methods.
In case of using a version of React Native Testing Library lower than v10.1.0, where screen helper is not available, the scenario function provides it as its first argument:
import { measureRenders } from 'reassure';
import { fireEvent } from '@testing-library/react-native';
test('Test with scenario', async () => {
const scenario = async (screen) => {
fireEvent.press(screen.getByText('Go'));
await screen.findByText('Done');
};
await measureRenders(<ComponentUnderTest />, { scenario });
});
If your test contains any async changes, you will need to make sure that the scenario waits for these changes to settle, e.g. using findBy queries, waitFor or waitForElementToBeRemoved functions from RNTL.
To measure your first test performance, you need to run the following command in the terminal:
yarn reassure
This command will run your tests multiple times using Jest, gathering performance statistics and will write them to .reassure/current.perf file. To check your setup, check if the output file exists after running the command for the first time.
Note: You can add
.reassure/folder to your.gitignorefile to avoid accidentally committing your results.
Reassure CLI will automatically try to detect your source code branch name and commit hash when you are using Git. You can override these options, e.g. if you are using a different version control system:
yarn reassure --branch [branch name] --commit-hash [commit hash]
To detect performance changes, you must measure the performance of two versions of your code current (your modified code) and baseline (your reference point, e.g. main branch). To measure performance on two branches, you must switch branches in Git or clone two copies of your repository.
We want to automate this task to run on the CI. To do that, you will need to create a performance-testing script. You should save it in your repository, e.g. as reassure-tests.sh.
A simple version of such script, using a branch-changing approach, is as follows:
#!/usr/bin/env bash
set -e
BASELINE_BRANCH=${GITHUB_BASE_REF:="main"}
# Required for `git switch` on CI
git fetch origin
# Gather baseline perf measurements
git switch "$BASELINE_BRANCH"
yarn install
yarn reassure --baseline
# Gather current perf measurements & compare results
git switch --detach -
yarn install
yarn reassure
To make setting up the CI integration and all prerequisites more convenient, we have prepared a CLI command to generate all necessary templates for you to start with.
Simply run:
yarn reassure init
This will generate the following file structure
├── <ROOT>
│ ├── reassure-tests.sh
│ ├── dangerfile.ts/js (or dangerfile.reassure.ts/js if dangerfile.ts/js already present)
│ └── .gitignore
reassure-tests.sh)Basic script allowing you to run Reassure on CI. More on the importance and structure of this file in the following section.
If your project already contains a dangerfile.ts/js, the CLI will not override it in any way. Instead, it will generate a dangerfile.reassure.ts/js file, allowing you to compare and update your own at your convenience.
.gitignoreIf the .gitignore file is present and no mentions of reassure appear, the script will append the .reassure/ directory to its end.
reassure-tests.sh)To detect performance changes, you must measure the performance of two versions of your code current (your modified code) and baseline (your reference point, e.g. main branch). To measure performance on two branches, you must switch branches in Git or clone two copies of your repository.
We want to automate this task to run on the CI. To do that, you will need to create a performance-testing script. You should save it in your repository, e.g. as reassure-tests.sh.
A simple version of such script, using a branch-changing approach, is as follows:
#!/usr/bin/env bash
set -e
BASELINE_BRANCH=${GITHUB_BASE_REF:="main"}
# Required for `git switch` on CI
git fetch origin
# Gather baseline perf measurements
git switch "$BASELINE_BRANCH"
yarn install
yarn reassure --baseline
# Gather current perf measurements & compare results
git switch --detach -
yarn install
yarn reassure
As a final setup step, you must configure your CI to run the performance testing script and output the result. For presenting output at the moment, we integrate with Danger JS, which supports all major CI tools.
You will need a working Danger JS setup.
Then add Reassure Danger JS plugin to your dangerfile:
// /<project_root>/dangerfile.reassure.ts (generated by the init script)
import path from 'path';
import { dangerReassure } from 'reassure';
dangerReassure({
inputFilePath: path.join(__dirname, '.reassure/output.md'),
});
If you do not have a Dangerfile (dangerfile.js or dangerfile.ts) yet, you can use the one generated by the reassure init script without making any additional changes.
It is also in our example file Dangerfile.
Finally, run both the performance testing script & danger in your CI config:
- name: Run performance testing script
run: ./reassure-tests.sh
- name: Run Danger.js
run: yarn danger ci
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
You can also check our example GitHub workflow.
The above example is based on GitHub Actions, but it should be similar to other CI config files and should only serve as a reference in such cases.
Note: Your performance test will run much longer than regular integration tests. It's because we run each test scenario multiple times (by default, 10) and repeat that for two branches of your code. Hence, each test will run 20 times by default. That's unless you increase that number even higher.
We measure React component render times with microsecond precision during performance measurements using React.Profiler. This means the same code will run faster or slower, depending on the machine. For this reason, baseline & current measurements need to be run on the same machine. Optimally, they should be run one after another.
Moreover, your CI agent needs to have stable performance to achieve meaningful results. It does not matter if your agent is fast or slow as long as it is consistent in its performance. That's why the agent should not be used during the performance tests for any other work that might impact measuring render times.
To help you assess your machine's stability, you can use the reassure check-stability command. It runs performance measurements twice for the current code, so baseline and current measurements refer to the same code. In such a case, the expected changes are 0% (no change). The degree of random performance changes will reflect the stability of your machine.
This command can be run both on CI and local machines.
Normally, the random changes should be below 5%. Results of 10% and more are considered too high, meaning you should work on tweaking your machine's stability.
Note: As a trick of last resort, you can increase the
runoption from the default value of 10 to 20, 50 or even 100 for all or some of your tests, based on the assumption that more test runs will even out measurement fluctuations. That will, however, make your tests run even longer.
You can refer to our example GitHub workflow.
Looking at the example, you can notice that test scenarios can be assigned to certain categories:
measureRenders functionCustom wrapper for the RNTL render function responsible for rendering the passed screen inside a React.Profiler component,
measuring its performance and writing results to the output file. You can use the optional options object that allows customizing aspects
of the testing
async function measureRenders(
ui: React.ReactElement,
options?: MeasureRendersOptions,
): Promise<MeasureResults> {
MeasureRendersOptions typeinterface MeasureRendersOptions {
runs?: number;
warmupRuns?: number;
wrapper?: React.ComponentType<{ children: ReactElement }>;
scenario?: (view?: RenderResult) => Promise<any>;
writeFile?: boolean;
}
runs: number of runs per series for the particular testwarmupRuns: number of additional warmup runs that will be done and discarded before the actual runs (default 1).wrapper: React component, such as a Provider, which the ui will be wrapped with. Note: the render duration of the wrapper itself is excluded from the results; only the wrapped component is measured.scenario: a custom async function, which defines user interaction within the UI by utilising RNTL or RTL functionswriteFile: (default true) should write output to file.measureFunction functionAllows you to wrap any synchronous function, measure its execution times and write results to the output file. You can use optional options to customize aspects of the testing. Note: the execution count will always be one.
async function measureFunction(
fn: () => void,
options?: MeasureFunctionOptions
): Promise<MeasureResults> {
MeasureFunctionOptions typeinterface MeasureFunctionOptions {
runs?: number;
warmupRuns?: number;
}
runs: number of runs per series for the particular testwarmupRuns: number of additional warmup runs that will be done and discarded before the actual runs.The default config which will be used by the measuring script. This configuration object can be overridden with the use
of the configure function.
type Config = {
runs?: number;
warmupRuns?: number;
outputFile?: string;
verbose?: boolean;
testingLibrary?:
| 'react-native'
| 'react'
| { render: (component: React.ReactElement<any>) => any; cleanup: () => any };
};
const defaultConfig: Config = {
runs: 10,
warmupRuns: 1,
outputFile: '.reassure/current.perf',
verbose: false,
testingLibrary: undefined, // Will try auto-detect first RNTL, then RTL
};
runs: the number of repeated runs in a series per test (allows for higher accuracy by aggregating more data). Should be handled with care.
warmupRuns: the number of additional warmup runs that will be done and discarded before the actual runs.
outputFile: the name of the file the records will be saved to
verbose: make Reassure log more, e.g. for debugging purposes
testingLibrary: where to look for render and cleanup functions, supported values 'react-native', 'react' or object providing custom render and cleanup functionsconfigure functionfunction configure(customConfig: Partial<Config>): void;
The configure function can override the default config parameters.
resetToDefaults functionresetToDefaults(): void
Reset the current config to the original defaultConfig object
You can use available environmental variables to alter your test runner settings.
TEST_RUNNER_PATH: an alternative path for your test runner. Defaults to 'node_modules/.bin/jest' or on Windows 'node_modules/jest/bin/jest'TEST_RUNNER_ARGS: a set of arguments fed to the runner. Defaults to '--runInBand --testMatch "**/__perf__/**/*.[jt]s?(x)", "**/*.(perf|perf-test).[jt]s?(x)"'Example:
TEST_RUNNER_PATH=myOwnPath/jest/bin yarn reassure
See the contributing guide to learn how to contribute to the repository and the development workflow.
Reassure is an Open Source project and will always remain free to use. The project has been developed in close partnership with Entain and was originally their in-house project. Thanks to their willingness to develop the React & React Native ecosystem, we decided to make it Open Source. If you think it's cool, please star it 🌟
Callstack is a group of React and React Native experts. If you need help with these or want to say hi, contact us at hello@callstack.com!
Like the project? ⚛️ Join the Callstack team who does amazing stuff for clients and drives React Native Open Source! 🔥
FAQs
Performance testing companion for React and React Native
The npm package reassure receives a total of 29,066 weekly downloads. As such, reassure popularity was classified as popular.
We found that reassure demonstrated a healthy version release cadence and project activity because the last version was released less than a year ago. It has 3 open source maintainers collaborating on the project.
Did you know?
Socket for GitHub automatically highlights issues in each pull request and monitors the health of all your open source dependencies. Discover the contents of your packages and block harmful activity before you install or update your dependencies.
Security News
Research
The Socket Research Team breaks down a malicious wrapper package that uses obfuscation to harvest credentials and exfiltrate sensitive data.
Research
Security News
Attackers used a malicious npm package typosquatting a popular ESLint plugin to steal sensitive data, execute commands, and exploit developer systems.
Security News
The Ultralytics' PyPI Package was compromised four times in one weekend through GitHub Actions cache poisoning and failure to rotate previously compromised API tokens.